Scribd
Upload
12 views

Datenblatt

The document provides specifications for the N-EUPEX FLE10.2 A 315 coupling, detailing its rated torque of 7,100 Nm and maximum torque of 23,375 Nm. It highlights operational parameters such as temperature range, misalignment tolerances, and dynamic torsional stiffness. Additional information includes product-specific options, balancing quality, and weight of 14.4 kg.

Uploaded by

jaridehmohammad31
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
12 views

Datenblatt

The document provides specifications for the N-EUPEX FLE10.2 A 315 coupling, detailing its rated torque of 7,100 Nm and maximum torque of 23,375 Nm. It highlights operational parameters such as temperature range, misalignment tolerances, and dynamic torsional stiffness. Additional information includes product-specific options, balancing quality, and weight of 14.4 kg.

Uploaded by

jaridehmohammad31
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Data sheet FLENDER couplings

N-EUPEX FLE10.2 A 315


Version according to the catalog FLE10.2

2LC01714AB990AA0

Product
Series N-EUPEX FLE10.2

Type A

Size 315

Scope of supply complete coupling

Torsional stiffness Torsionally flexible

Overload withstand capability

Shaft distance S 5,5 mm

Basic data1)
Rated coupling torque TKN 7 100 Nm

Maximum coupling torque TKmax 23 375 Nm

Maximum coupling speed nKmax 2 600 1/min

Operating temperature (min.) Tmin -30 °C

Operating temperature (max.) Tmax 80 °C

Axial misalignment (max.)2) Ka ± 2,5 mm

Radial misalignment3) Kr 0,4 mm

Angular misalignment (max.)3) KW 0,08 °

Torsional stiffness, dynamic4) cTdyn 472 kNm/rad

Proportionate damping Ѱ 1,4

Total weight m 14,4 kg

Connection 1 part 17) Connection 2 part 27)


Hub length 125 mm Hub length 125 mm

Product-specific options
Elastomer packs NBR 80 Shore A

Axial misalignment (max.) 2,5 mm

Balance state Corrosion protection


DIN ISO 21940-11 component CUSTOS 70-51-3 - indoor
Method Preservation
balance storage up to 3 months

Speed 1 500 1/min

Balancing quality G 16

1/2
Note
1) The formula symbols are defined in Catalog.

2) The permissible axial offset is applicable for offsets that slowly occur, e.g. as a result of thermal expansion of the coupled shaft.

3) Permissible shaft offset at rated speed 1500 rpm.

4) Torsional stiffness at 0.5 * TKN, excitation amplitude of 0.1 * TKN with 10 Hz, ambient temperature 20°C.

7) The orderer is responsible for verifying the design strength of the shaft-hub connection.

2/2

You might also like