Scribd
Upload
1 views

OSPF Single Area

The document provides a step-by-step guide for configuring OSPF in a single area network, including IP address setup for routers R1 and R2 as well as virtual PCs. It includes commands for verification of routing and OSPF neighbor status. Additionally, it shows successful ping tests between virtual PCs, indicating proper connectivity.

Uploaded by

digitalmaster005
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1 views

OSPF Single Area

The document provides a step-by-step guide for configuring OSPF in a single area network, including IP address setup for routers R1 and R2 as well as virtual PCs. It includes commands for verification of routing and OSPF neighbor status. Additionally, it shows successful ping tests between virtual PCs, indicating proper connectivity.

Uploaded by

digitalmaster005
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

OSPF

Single
Single
Area
Call Us For More Info Visit Our Website
www.cciehub.com [email protected]
+91 96502 72078
OSPF

Call Us For More Info Visit Our Website


www.cciehub.com [email protected]
+91 96502 72078
Step 1 : Configure the ip address

R1
Conf t
Host R1
Int f0/1
Ip add 10.0.0.1 255.0.0.0
No sh

Int f0/0
Ip add 192.168.1.1 255.255.255.0
No sh

R2
Corn t
Host R2
Int f0/0
Ip add 192.168.1.2 255.255.255.0
No sh

Int f0/1
Ip add 20.0.0.1 255.0.0.0
No sh

Call Us For More Info Visit Our Website


www.cciehub.com [email protected]
+91 96502 72078
Step 1:Configure the ip address to VPC (PC/computer)

VPC 5
Vpcs> Ip 10.0.0.2 255.0.0.0 10.0.0.1

VPC 6
Vpcs> Ip 10.0.0.3 255.0.0.0 10.0.0.1

VPC 7
Vpcs> Ip 20.0.0.2 255.0.0.0 20.0.0.1

VPC 8
Vpcs> Ip 20.0.0.3 255.0.0.0 20.0.0.1

Step 3 : Verification

R1>show ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

O 20.0.0.0/8 [110/20] via 192.168.1.2, 00:15:56, FastEthernet0/0


C 10.0.0.0/8 is directly connected, FastEthernet0/1
C 192.168.1.0/24 is directly connected, FastEthernet0/0
Call Us For More Info Visit Our Website
www.cciehub.com [email protected]
+91 96502 72078
R1>sh ip ospf neighbor

Neighbor ID Pri State Dead Time Address Interface


192.168.1.2 1 FULL/BDR 00:00:38 192.168.1.2 FastEthernet0/0

R1#show ip int brief


Interface IP-Address OK? Method Status Protocol
FastEthernet0/0 192.168.1.1 YES manual up up
FastEthernet0/1 10.0.0.1 YES manual up up

R1>show ip ospf database

OSPF Router with ID (192.168.1.1) (Process ID 10)

Router Link States (Area 0)

Link ID ADV Router Age Seq# Checksum Link count


192.168.1.1 192.168.1.1 1058 0x80000004 0x007ADA 2
192.168.1.2 192.168.1.2 905 0x80000004 0x00CA7D 2

Net Link States (Area 0)

Link ID ADV Router Age Seq# Checksum


192.168.1.1 192.168.1.1 1058 0x80000002 0x00B4D5

Call Us For More Info Visit Our Website


www.cciehub.com [email protected]
+91 96502 72078
PCS> ping 20.0.0.3

84 bytes from 20.0.0.3 icmp_seq=1 ttl=62 time=26.994 ms


84 bytes from 20.0.0.3 icmp_seq=2 ttl=62 time=28.377 ms
84 bytes from 20.0.0.3 icmp_seq=3 ttl=62 time=32.102 ms
84 bytes from 20.0.0.3 icmp_seq=4 ttl=62 time=38.349 ms
84 bytes from 20.0.0.3 icmp_seq=5 ttl=62 time=26.839 ms

VPCS> ping 20.0.0.2

84 bytes from 20.0.0.2 icmp_seq=1 ttl=62 time=26.335 ms


84 bytes from 20.0.0.2 icmp_seq=2 ttl=62 time=27.623 ms
84 bytes from 20.0.0.2 icmp_seq=3 ttl=62 time=28.993 ms
84 bytes from 20.0.0.2 icmp_seq=4 ttl=62 time=30.984 ms
84 bytes from 20.0.0.2 icmp_seq=5 ttl=62 time=37.707 ms

Call Us For More Info Visit Our Website


www.cciehub.com [email protected]
+91 96502 72078

You might also like