MILL TEST CERTIFICATE Jindal Stainless Limited.
(INSPECTION CERTIFICATE) IS 6911
Jajpur,Odisha
In Accordance with EN 10204 :2004 Type 3.1
CM/L-5200020363
a6c923ibjMDE3MDA1NTM=
CUSTOMER :MAGNA METALS CERTIFICATE NO. :JSL-JRD/QA/2023-24/DOM/01700553
CITY :MUMBAI DATE :28.12.2023
P.O.NO. :1332454_MAGNA/18/12/PPP--20/1 PO DATE:18.12.2023 VEHICLE NO. :PB05AQ9365
CUSTOMER SPECIFICATION :As per OA/PO agreement SALES ORDER NO. :0558090155
SHIPMENT/DELIVERY NO. :6300122354 NET WT(MT) :8.834
Material Description/Product Grade / Type Material Specifications Process-Route
STAINLESS STEEL 316L/316 ASTM A240/A240M-23, ASME SA-240/SA-240M 2023 SEC. II, EF-AOD-LRF-CCS
PART A, IS 6911:2017 AMD. 3
PHYSICAL DESCRIPTION
SR BATCH NO. PARENT COIL NO. PKT/PALLET WEIGHT NO. OF HEAT NO. THK WIDTH LENGTH FINISH EDGE QUALITY
NO. / PLATE NO. NO. (MT) PCS (mm) (mm) (mm)
1 K065802903 0000984706 K065802903 2.947 39 12304170 3.000 1,250.00 2,500.00 2B Mill Edge PRIME
2 K065802904 0000984706 K065802904 2.941 39 12304170 3.000 1,250.00 2,500.00 2B Mill Edge PRIME
3 K065802905 0000984706 K065802905 2.946 39 12304170 3.000 1,250.00 2,500.00 2B Mill Edge PRIME
CHEMICAL ANALYSIS (LADLE)
HEAT NO. %C %Mn %S %P %Si %Ni %Cr %N %Mo %Cu %Ti %Nb %Al
12304170 0.020 1.30 0.005 0.039 0.41 10.03 16.25 0.036 2.02 - - - -
MECHANICAL PROPERTIES:SAMPLE DIRECTION - TRANSVERSE
Sr Rp 0.2/ Rp 1.0 Rm/ %EL %EL %EL Hardness Bend Test
No. YS Mpa TS GL= 50 GL= 80 GL= 5.65 SO HRBW
Mpa Mpa mm mm mm
1 321 - 611 56 - - 81 / 82 -
2 321 - 611 56 - - 81 / 82 -
3 321 - 611 56 - - 81 / 82 -
ADDITIONAL INFORMATION
1)- MATERIAL HAS BEEN SOLUTION ANNEALED AT MIN 1040º C & QUENCHED IN WATER.
2)- ABOVE MATERIAL ALSO CONFIRM TO IS 6911:2017 AMD. 3 GRADE 316L/316.
3)- MATERIALS CONFIRM TO THE REQUIREMENTS AS PER ASTM A480/A480M-23 & ASME SA-480/SA-480M SEC. II PART A-2023.
* THE ABOVE MATERIAL FULLY CONFORMS TO IS 6911:2017 AMD 3 CHEMICAL & MECHANICAL PROPERTIES OF
PRODUCT AS TESTED IN ACCORDANCE WITH THE SCHEME OF TESTING & INSPECTION CONTAINED
IN BIS CERTIFICATION.
HOT ROLLED FINISHES : (BL, ANN, N1, 1D, CHQ) & COLD ROLLED FINISHES: (2E, 2D, 2B, BA, NO.4, HL)
PLATE:- MATERIAL 5.00 MM AND OVER IN THICKNESS AND OVER 250 MM IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS 3 MM OR OVER (AS PER DIN STANDARD)
SHEET:- MATERIAL UNDER 5.00 MM IN THICKNESS AND 600 MM AND OVER IN WIDTH (AS PER ASTM/ASME STANDARD) & THICKNESS LESS THAN 3 MM (AS PER DIN STANDARD)
COIL:- IN "PHYSICAL DESCRIPTION"- LENGTH MENTIONED AS "COIL".
Jindal Stainless Limited, This is hereby certified that the material was manufactured, sampled, tested & inspected in accordance ISO 9001 : 2015
Kalinga Nagar Industrial Complex, with requirements of the material specification and has been found to meet the requirements of order. ISO 14001 : 2015
PO: Danagadi , Jajpur The material supplied under this Test Certificate is free from any radioactive contamination as checked ISO 45001 : 2018
Odisha - 755026, India. by procedures established by Jindal Stainless Limited as per the recommendations provided by AERB. ISO 50001: 2018
TEL :+91-9078899031, IATF 16949 : 2016
FAX :+91-06726-266006 CERTIFIED COMPANY
Email: [email protected] Format Ref: JSLO/F/QA-CRM/32 Rev.01
Eff Date: 24/09/2021
Any unauthorised usage of this Test Certificate will warrant Legal Action.
1/1
