Quick Setup Guide

Start Here HL-5340D/HL-5350DN

(EU only)

Before you can use the printer, read this Quick Setup Guide for the correct setup and installation.
To view the Quick Setup Guide in other languages, please visit http://solutions.brother.com/.

IMPORTANT
DO NOT connect the interface cable yet.

1 Unpack the printer and check the components

11 8
2 7 a Front Cover Release Button
b Control Panel
3 c Face-down Output Tray
Support Flap 1 (Support Flap 1)
4 d Front Cover
e Paper Tray
f Power Switch
6 g Face-down Output Tray
Support Flap 2 (Support Flap 2)
h Face-down Output Tray
i Multi-purpose Tray (MP Tray)
5 9

CD-ROM
(including User's Guide and Drum Unit and Toner
Quick Setup Guide AC Power Cord
Network User's Guide) Cartridge Assembly

WARNING
Plastic bags are used in the packaging of your printer. To avoid danger of suffocation, please keep
these bags away from babies and children.

Note
• Save all packing materials and the box in case for any reason you must ship your printer.
• The interface cable is not a standard accessory. Buy the appropriate interface cable for the interface you
want to use (USB, Parallel or Network).
USB cable
• Please make sure you use a USB 2.0 interface (Type A/B) cable that is no longer than 6 feet (2.0 meters).
• When you use a USB cable, make sure you connect it to the USB port of your computer and not to a USB port on a
keyboard or non-powered USB hub.
Parallel cable
DO NOT use a parallel interface cable that is longer than 6 feet (2.0 meters).Use a shielded interface cable that is IEEE
1284-compliant.
Network cable (For HL-5350DN)
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network.

EEU-ENG Version 1
1
 Note
Keep a minimum gap around the printer as shown in the illustration.

100mm(4 in.)
100mm 100mm
(4 in.) (4 in.)
130mm
(5.12 in.)

Symbols used in this guide

WARNING WARNINGS tell you what to do to prevent possible personal injury.

CAUTIONS specify procedures you must follow or avoid to prevent possible minor
CAUTION injuries.
IMPORTANT specify procedures you must follow or avoid to prevent possible damage
IMPORTANT to the printer or other objects.
Electrical Hazard icons alert you to a possible electrical shock.

Hot Surface icons warn you not to touch machine parts that are hot.

Notes tell you how you should respond to a situation that may arise or give tips about
Note how the current operation works with other features.
User's Guide
Indicates reference to the User's Guide or Network User's Guide which is on the
Network User's
CD-ROM we have supplied.
Guide

b
2
Press the front cover release button and open
Install the drum unit and the front cover a.
toner cartridge assembly

IMPORTANT
DO NOT connect the interface cable yet.

11

c Unpack the drum unit and toner cartridge

a Remove the packing tape from the outside of assembly.
the printer.

2
d Gently shake it from side to side several times b While pressing the blue paper-guide release
to distribute the toner evenly inside the lever a, slide the paper guides to fit the paper
assembly. size you are loading in the tray. Make sure that
the guides are firmly in the slots.

e Put the drum unit and toner cartridge assembly

11
into the printer until it clicks into place.

c Fan the stack of paper well to avoid paper jams

and misfeeds.

d Put paper in the tray, and make sure that the

paper is below the maximum paper mark a.
The side to be printed on must be face down.

f
11
Close the front cover of the printer.

3 Load paper in the paper

tray
a Pull the paper tray completely out of the printer.

IMPORTANT
Make sure the paper guides touch the sides of
the paper so it will feed properly.

e Put the paper tray firmly back in the printer.

Make sure that it is completely inserted into the
printer.

3
 e
4
Press Go. The printer prints a test page. Check
Print a test page that the test page has printed correctly.

IMPORTANT
DO NOT connect the interface cable yet.

a Make sure that the printer power switch is off. Note

Connect the AC power cord to the printer.
This function will not be available after the first
print job you send from your computer.

Now go to

Go to the next page to install the printer driver.

b Turn on the printer power switch.

c Unfold support flap1.

d After the printer has finished warming up, the

Status LED stops blinking and stays green.

4
 5 Choose your connection type

Windows®
3

For USB interface cable

USB
Windows®, go to page 6

Macintosh
Macintosh, go to page 8

For Parallel interface cable

Windows®
Windows®, go to page 9

Parallel
Windows®
For Wired Network

Wired Network
Windows®, go to page 11
Macintosh, go to page 15

Macintosh

5
 USB Windows®
For USB Interface Cable Users

d
6
Put the supplied CD-ROM into your CD-ROM
Install the printer driver drive. The opening screen will appear
automatically.
and connect the printer Choose your printer model and the language.
to your computer
e Click Install Printer Driver on the menu
screen.
IMPORTANT
DO NOT connect the USB interface cable yet.

Note
If the Found New Hardware Wizard appears on
your computer, click Cancel. f Click USB cable users.

Note
• For Windows Vista®, when the User Account
Control screen appears, click Continue.

a Turn off the printer power switch.

b Make sure the USB interface cable is NOT

• If you want to install the PS driver (Brother’s
BR-Script Driver), choose Custom setup and
connected to the printer, and then begin then follow the on-screen instructions. When
installing the printer driver. If you have already the Select Components screen appears,
connected the cable, remove it. check PS (PostScript Emulation) Driver, and
then continue following the on-screen
instructions.

g When the License Agreement window

appears, click Yes if you agree to the License
Agreement.

h Remove the label covering the USB interface

connector.

c Turn on your computer. (You must be logged

on with Administrator rights.)

6
 USB Windows®
i When this screen appears, make sure the
printer power switch is on.
Connect the USB cable to the USB connector
marked with a symbol, and then connect

Windows®
the cable to the computer. Click Next.

USB
Macintosh
j Click Finish.

Note
• If you want to register your product on-line,
check On-Line Registration.
• If you do not want to set your printer as Default
printer, uncheck Set as Default Printer.
• If you want to disable the Status Monitor,
uncheck Enable Status Monitor.

The installation is now

Finish complete.

Note
XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver is the
most suitable driver when printing from the
applications that use the XML Paper Specification
documents. Please download the latest driver by
accessing the Brother Solutions Center at
http://solutions.brother.com/.

7
 USB Macintosh

For USB Interface Cable Users

Connect the printer to f

6
Click Install Printer Driver on the menu
screen.
your Macintosh and
install the driver
a Remove the label covering the USB interface
connector.

g Click USB cable users and follow the

on-screen instructions. Then, restart your
Macintosh.

Note
Please see the User’s Guide on the CD-ROM to
install the PS driver (Brother’s BR-Script Driver).

b Connect the USB cable to the USB connector h The Brother software will search for the Brother
marked with a symbol, and then connect printer. During this time the following screen
the cable to your Macintosh. will appear.

i Choose the printer you wish to connect, and

then click OK.

IMPORTANT
DO NOT connect the printer to a USB port on
a keyboard or a non-powered USB hub.

c Make sure the printer power switch is on.

d Turn on your Macintosh. Put the supplied CD-

ROM into your CD-ROM drive.

e Double-click the HL5300 icon on your desktop.

j When this screen appears, click OK
Double-click the Start Here icon. Follow the
on-screen instructions.

16

The installation is now

Finish complete.

8
 Parallel Windows®
For Parallel Interface Cable Users

Install the driver and d

6
Put the supplied CD-ROM into your CD-ROM
drive. The opening screen will appear
connect the printer to automatically.
your computer Choose your printer model and the language.

e Click Install Printer Driver on the Menu

IMPORTANT screen.
DO NOT connect the parallel interface cable
yet.

Note
If the Found New Hardware Wizard appears on
your computer, click Cancel.
f

Windows®
Click Parallel cable users.

Parallel
Note
• For Windows Vista®, when the User Account
Control screen appears, click Continue.

a Turn off the printer power switch.

• If you want to install the PS driver (Brother’s
b Make sure the parallel interface cable is NOT BR-Script Driver), choose Custom setup and
connected to the printer, and then begin then follow the on-screen instructions. When
installing the printer driver. If you have already the Select Components screen appears,
connected the cable, remove it. check PS (PostScript Emulation) Driver, and
then continue following the on-screen
instructions.

g When the License Agreement window

appears, click Yes if you agree to the License
Agreement.

h Click Finish.

Note
• If you want to register your product on-line,
check On-Line Registration.
c Turn on your computer. (You must be logged • If you do not want to set your printer as Default
on with Administrator rights.) printer, uncheck Set as Default Printer.
• If you want to disable the Status Monitor,
uncheck Enable Status Monitor.

9
 Parallel Windows®
i Connect the parallel interface cable to your
computer, and then connect it to your printer.

j Turn on the printer power switch.

The installation is now

Finish complete.

Note
XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver is the
most suitable driver when printing from the
applications that use the XML Paper Specification
documents. Please download the latest driver by
accessing the Brother Solutions Center at
http://solutions.brother.com/.

10
 Wired Network Windows®
For Wired Network Interface Cable Users (HL-5350DN only)

d
6
Put the supplied CD-ROM into your CD-ROM
For Peer-to-Peer network drive. The opening screen will appear
printer users automatically.
Choose your printer model and the language.

e Click Install Printer Driver on the menu

screen.
2

1
TCP/IP TCP/IP

a Router
b Network printer

Note
If you are using Windows® Firewall or a firewall f Click Network cable users.
function of anti-spyware or antivirus applications, Note
temporarily disable them. Once you are sure that
you can print, configure the software settings • For Windows Vista®, when the User Account
following the instructions. Control screen appears, click Continue.

Connect the printer to your network and install

the driver

a Connect the network interface cable to the LAN

Windows®
connector marked with a symbol and then
connect it to a free port on your hub.
• If you want to install the PS driver (Brother’s

Wired Network
BR-Script Driver), choose Custom setup and
then follow the on-screen instructions. When
the Select Components screen appears,
check PS (PostScript Emulation) Driver, and

Macintosh
then continue following the on-screen
instructions.

g When the License Agreement window

appears, click Yes if you agree to the License
b Make sure the printer power switch is on.
Agreement.

c Turn on your computer. (You must be logged

h Choose Brother Peer-to-Peer Network
Printer, and then click Next.
on with Administrator rights.)

11
 Wired Network Windows®
i Choose Search the network for devices and
choose from a list of discovered devices The installation is now
(Recommended). Or enter your printer's IP
Address or its node name. Click Next.
Finish complete.

Note
XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver is the
most suitable driver when printing from the
applications that use the XML Paper Specification
documents. Please download the latest driver by
accessing the Brother Solutions Center at
http://solutions.brother.com/.

Note
You can find your printer’s IP Address and the
node name by printing out the Printer Settings
Page.

j Choose your printer, and then click Next.

Note
If your printer takes a long time (about 1 minute)
to appear on the list, click Refresh.

k Click Finish.

Note
• If you want to register your product on-line,
check On-Line Registration.
• If you do not want to set your printer as Default
printer, uncheck Set as Default Printer.
• If you want to disable the Status Monitor,
uncheck Enable Status Monitor.
• If you disabled your Personal Firewall software
(e.g. Windows® Firewall), turn it back on.

12
 Wired Network Windows®

6 For shared network printer

users
d Click Network cable users.

Note
• For Windows Vista®, when the User Account
11 Control screen appears, click Continue.

TCP/IP

• If you want to install the PS driver (Brother’s

2 4 BR-Script Driver), choose Custom setup and
then follow the on-screen instructions. When
11 the Select Components screen appears,
a Client computer check PS (PostScript Emulation) Driver, and
b Also known as “Server” or “Print server” then continue following the on-screen
c TCP/IP or USB or Parallel instructions.
d Printer
Note
e When the License Agreement window
appears, click Yes if you agree to the License
If you are going to connect to a shared printer on Agreement.
your network, we recommend that you ask your
system administrator about the queue or share f Choose Network Shared Printer, and then
name for the printer prior to installation. click Next.

Install the driver and choosing the correct printer

queue or share name

a Turn on your computer. (You must be logged

Windows®
on with Administrator rights.)

Wired Network
Put the supplied CD-ROM into your CD-ROM
drive. The opening screen will appear
automatically.
Choose your printer model and the language.
g Choose your printer's queue, and then click
c
Macintosh
Click Install Printer Driver on the menu OK.
screen.

Note
Contact your administrator if you do not know the
location or the name of the printer in the network.

13
 Wired Network Windows®
h Click Finish.

Note
• If you want to register your product on-line,
check On-Line Registration.
• If you do not want to set your printer as Default
printer, uncheck Set as Default Printer.
• If you want to disable the Status Monitor,
uncheck Enable Status Monitor.

The installation is now

Finish complete.

Note
XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver is the
most suitable driver when printing from the
applications that use the XML Paper Specification
documents. Please download the latest driver by
accessing the Brother Solutions Center at
http://solutions.brother.com/.

14
 Wired Network Macintosh

For Wired Network Interface Cable Users (HL-5350DN only)

Connect the printer to g

6
The Brother software will search for the Brother
printer. During this time the following screen
your Macintosh and will appear.
install the driver
a Connect the network interface cable to the LAN
connector marked with a symbol and then
connect it to a free port on your hub.
h Choose the printer you wish to connect, and
then click OK.

b Make sure the printer power switch is on.

c Turn on your Macintosh. Put the supplied CD-

ROM into your CD-ROM drive.
Note
d Double-click the HL5300 icon on your desktop. • If there is more than one of the same printer
Double-click the Start Here icon. Follow the model connected on your network, the MAC
on-screen instructions. Address (Ethernet Address) will be displayed
after the model name.You can also confirm
your IP Address by scrolling to the right.

Windows®
• You can find your printer’s MAC Address
(Ethernet Address) and the IP Address by

Wired Network
printing out the Printer Settings Page.

i When this screen appears, click OK.

Macintosh
e Click Install Printer Driver on the menu
screen.

The installation is now

Finish complete.

f Click Network cable users and follow the

on-screen instructions. Then, restart your
Macintosh.

Note
Please see the User’s Guide on the CD-ROM to
install the PS driver (Brother’s BR-Script Driver).

15
 Other Information

Safety precautions

To use the printer safely

If you DO NOT follow these safety instructions, there is a possibility of a fire, electrical shock, burn or
suffocation. Please keep these instructions for later reference and read them before attempting any
maintenance.

WARNING

There are high voltage electrodes inside the printer. Before you clean the inside of the printer, make
sure that you have turned off the power switch and unplugged the printer from the AC power outlet.

DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.

Always make sure the plug is fully inserted.

Plastic bags are used in the packaging. To avoid danger of suffocation, keep these bags away from
babies and children.
DO NOT use flammable substances, any type of spray or any organic solvent/liquids containing
alcohol or ammonia to clean the inside or outside of the printer. Doing this may cause a fire or
electrical shock. Refer to Chapter 6 of the User's Guide for how to clean the printer.

DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner dust to
ignite inside the vacuum cleaner, potentially starting a fire. Carefully clean the toner dust with a dry,
lint-free cloth and dispose of it according to local regulations.
Cleaning the outside of the printer:
•Make sure that you have unplugged the printer from the AC power outlet.
•Use neutral detergents. Cleaning with volatile liquids such as thinner or benzine will damage the
outside surface of the printer.
•DO NOT use cleaning materials that contain ammonia.

16
Other Information

CAUTION
Lightning and power surges can damage this product! We recommend that you use a quality surge protection
device on the AC power outlet, or unplug the cords during a lightning storm.

After you have just used the printer, some internal parts of the printer will be extremely hot. When you open
the front or back cover (back output tray) of the printer, DO NOT touch the shaded parts shown in the
illustration.

Inside the printer Inside the printer

(Front View) (Back View)

IMPORTANT
DO NOT remove or damage the caution labels located on or around the fuser inside the printer.

17
 Other Information

Regulations
EC Declaration of Conformity International ENERGY STAR® Compliance
Statement
The purpose of the International ENERGY STAR®
Program is to promote the development and
popularization of energy-efficient office equipment.
As an ENERGY STAR® Partner, Brother Industries,
Ltd. has determined that this product meets the
ENERGY STAR® guidelines for energy efficiency.

IEC 60825-1+A2:2001 Specification

This machine is a Class 1 laser product as defined in
IEC 60825-1+A2: 2001 specifications. The label
shown below is attached in countries where required.

CLASS 1 LASER PRODUCT

APPAREIL À LASER DE CLASSE 1
LASER KLASSE 1 PRODUKT

This machine has a Class 3B Laser Diode which

emits invisible laser radiation in the Laser Unit. The
Laser Unit should not be opened under any
circumstances.

WARNING
Use of controls or adjustments or performance of
procedures other than those specified in this manual
may result in hazardous invisible radiation exposure.

Internal laser radiation

Maximum radiation power: 5 mW
Wave length: 770 - 810 nm
Laser class: Class 3B

18
Other Information
EU Directive 2002/96/EC and EN50419

This equipment is marked with the above recycling

symbol. It means that at the end of the life of the
equipment you must dispose of it separately at an
appropriate collection point and not place it in the
normal domestic unsorted waste stream. This will
benefit the environment for all. (European Union only)

IMPORTANT - For Your Safety

To ensure safe operation, the supplied three-pin plug
must be inserted only into a standard three-pin power
outlet that is properly grounded through the normal
household wiring.
Extension cords used with this printer must be three-
pin plug type and correctly wired to provide proper
grounding. Incorrectly wired extension cords may
cause personal injury and equipment damage.
The fact that the equipment operates satisfactorily
does not imply that the power is grounded and that
the installation is completely safe. For your safety, if
in any doubt about the effective grounding of the
power, call a qualified electrician.
This product should be connected to an AC power
source within the range indicated on the rating label.
DO NOT connect it to a DC power source. If you are
not sure, contact a qualified electrician.

Disconnect device
This product must be installed near an AC power
outlet that is easily accessible. In case of
emergencies, you must disconnect the power cord
from the AC power outlet to shut off power completely.

LAN connection
(For Model HL-5350DN only)

CAUTION
DO NOT connect this product to a LAN connection
that is subject to over-voltages.

19
 Other Information

Shipment of the printer

If for any reason you must ship your printer, carefully d Repack the printer.
package the printer to avoid any damage during
transit. We recommend that you save and use the
original packaging. The printer should also be
adequately insured with the carrier.

CAUTION
When shipping the printer, the DRUM UNIT and
TONER CARTRIDGE assembly must be removed
from the printer and put in a plastic bag. Failure to
remove the unit and put it in a plastic bag before
shipping may cause severe damage to the printer
and may VOID THE WARRANTY.

a Turn off the printer power switch, and then

unplug the AC power cord.

b Remove the drum unit and toner cartridge

assembly. Put it in a plastic bag and seal the
bag completely.

c Close the front cover.

20
Other Information

Supplied CD-ROM
You can find a variety of information on the CD-ROM.

Windows® Macintosh

Install Printer Driver

Install the printer driver.

Install Other Drivers or Utilities

Install optional drivers, utilities and Network
management tools.
Documentation
View the Printer User’s Guide and Network User's
Guide in HTML format.
You can also view the manuals in PDF format by Install Printer Driver
accessing the Brother Solutions Center. Install the printer driver.
The User’s Guide and Network User’s Guide in HTML
format will be installed automatically when you install Documentation
View the Printer User’s Guide in HTML format.
the driver. Click the Start, All Programs 1, your
You can also view the User’s Guide in PDF format by
printer, and then User’s Guide in HTML format. If
accessing the Brother Solutions Center.
you do not want to install the User’s Guide, choose
Custom setup from Install Printer Driver, and Brother Solutions Center
uncheck User’s Guides in HTML format when you The Brother Solutions Center
install the driver. (http://solutions.brother.com/) is a one-stop resource
1 Programs for Windows® 2000 users for all your printer support needs. Download the latest
drivers and utilities for your printer, read FAQs and
Brother Solutions Center troubleshooting tips, or learn about printer solutions.
The Brother Solutions Center
(http://solutions.brother.com/) is a one-stop resource On-Line Registration
for all your printer support needs. Download the latest Register your product on-line.
drivers and utilities for your printer, read FAQs and Supplies Information
troubleshooting tips, or learn about printer solutions. Visit our website for original/genuine Brother supplies
On-Line Registration at http://www.brother.com/original/.
Register your product on-line.
Supplies Information
Visit our website for original/genuine Brother supplies
at http://www.brother.com/original/.

Note
For visually impaired users, we have prepared an HTML file
on the supplied CD-ROM: readme.html. This file can be read
by Screen Reader ‘text-to-speech’ software.

21
 Other Information

Control panel

a Back Cover LED

1 The Back Cover LED indicates when errors occur in the back of the printer.
2 b Toner LED
3
The Toner LED indicates when the toner is low or requires replacement.
c Drum LED
4 The Drum LED indicates when the drum life will end soon, the drum is at the
end of its life or the corona wire needs cleaning.
5
d Paper LED
The Paper LED indicates when the paper tray is empty or there is a paper
jam.
e Status LED
6
The Status LED will be on/blink or change color depending on the printer
status.
7
f Job Cancel button
Stops and Cancels the print operation in progress.
g Go button
Wake-up / Error recovery / Form feed / Reprint

For the details of the control panel, see chapter 4 of the User's Guide on the CD-ROM.

22
Other Information

Printer LED Indications

Blinking: or or ON: or or OFF:

Printer LED OFF Sleep Warming up 1 Ready Receiving data 2 Print data
remaining
Back Cover

Toner

Drum

Paper

Status

Dimmed Green Green Yellow

Green Yellow

Printer LED Toner low 3 Replace toner Drum life will Replace drum Drum error
end soon 3
Back Cover

Toner
Yellow Yellow
Drum
Yellow Yellow Yellow
Paper

Status

Green Red Green Green Red

Chapter6 Chapter6 Chapter6 Chapter6 Chapter4

User's Guide

Printer LED Front cover open Fuser cover Paper jam / No paper Paper jam Service call 2
open 2/ Incorrect paper (Back cover or
Duplex disabled size 2 Duplex tray) 2
Back Cover
Yellow Yellow Yellow
Toner
Yellow
Drum
Yellow
Paper
Yellow Yellow Yellow Yellow
Status

Red Red Red Red Red Red

Chapter7 Chapter7 Chapter7 Chapter7 Chapter7 Chapter4

User's Guide

1 The LED will blink in a pattern of ON for 1 second and then OFF for 1 second.
2 The LED will blink in a pattern of ON for 0.5 seconds and then OFF for 0.5 seconds.
3
The yellow LED will blink in a pattern of ON for 2 seconds and then OFF for 3 seconds.

23
 Options and Consumables

Options
The printer has the following optional accessories. You can expand the capabilities of the printer by adding these
items. For more details about the optional Lower Tray Unit and compatible SO-DIMM Memory, visit us at
http://solutions.brother.com/.
For installing these items, see Chapter 5 of the User's Guide on the CD-ROM.

Lower Tray Unit SO-DIMM Memory

LT-5300

Second lower paper tray unit can hold up to 250 You can expand the memory by installing
sheets of paper. When the tray is installed, the printer a (144-pin SO-DIMM) memory module.
expands total input capacity up to 550 sheets.

Consumables
When the time comes to replace consumable items, an error will be indicated by the LED’s on the control panel.
For more information about the consumables for your printer, visit us at http://www.brother.com/original/ or contact
your local Brother reseller.
For replacing the consumable items, see Chapter 6 of the User's Guide on the CD-ROM.

Toner cartridge Drum unit

24
Trademarks
Brother and the Brother logo are registered trademarks and BRAdmin Light and BRAdmin Professional are trademarks of
Brother Industries, Ltd.
Microsoft, Windows, Windows Server and Internet Explorer are registered trademarks of Microsoft Corporation in the United
States and/or other countries.
Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other
countries.
Apple, Macintosh and Safari are trademarks of Apple Inc., registered in the United States and other countries.
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary
programs.
All other trademarks are the property of their respective owners.

Compilation and Publication Notice

Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product
descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be
responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited
to typographical and other errors relating to the publication.
This product is designed for use in a professional environment.

Copyright and License

© 2008 Brother Industries, Ltd.
© 1983-1998 PACIFIC SOFTWORKS INC.
This product includes the "KASAGO TCP/IP" software developed by ELMIC WESCOM,INC.
© 2009 Devicescape Software, Inc.
This product includes RSA BSAFE Cryptographic software from RSA Security Inc.
Portions Copyright for ICC profiles 2003 by European Color Initiative, www.eci.org. ALL RIGHTS RESERVED.