General-purpose Relay

G2R-@-S (S) CSM_G2R-_-S_(S)_DS_E_1_7

Slim and Space-saving Power Plug-in Relay

■ Reduces wiring work by 60% when combined with the
P2RF-@-PU Push-In Plus Socket LR
(according to actual OMRON measurements).
■ Lockable test button models available.
■ Built-in mechanical operation indicator.
■ Provided with nameplate.
■ AC type is equipped with a coil-disconnection self-diagnostic
function (LED type).
■ High switching power (1-pole: 10 A).

For the most recent information on models that have been certified for
safety standards, refer to your OMRON website.

Model Number Structure

Model Number Legend
G2R - -S (S)
1 2 3 4 5
1. Number of Poles 4. Rated Coil Voltage
1: 1 pole 5. Mechanical operation indicator and Nameplate
2: 2 poles (S): Models with mechanical operation indicator and Nameplate
2. Terminals
S: Plug-in
3. Classification
Blank: General-purpose
N: LED indicator
D: Diode
ND: LED indicator and diode
NI: LED indicator with test button
NDI: LED indicator and diode with test button

Note: Contact your OMRON representative for Relays with gold-plated contacts.

Ordering Information
List of Models
Classification Contact form
Coil ratings
SPDT DPDT
General-purpose G2R-1-S (S) G2R-2-S (S)
AC 24, 48, 110, 120, 230, 240
LED indicator G2R-1-SN (S) G2R-2-SN (S)
DC 6, 12, 24, 48
LED indicator with test button G2R-1-SNI (S) G2R-2-SNI (S)
Diode G2R-1-SD (S) G2R-2-SD (S)
LED indicator and diode DC 6, 12, 24, 48 G2R-1-SND (S) G2R-2-SND (S)
LED indicator and diode with test button G2R-1-SNDI (S) G2R-2-SNDI (S)
Note: 1. The standard models are compliant with UL/CSA and VDE standards. Also, an EC compliance declaration has been made for combina-
tions with the P2RF-@-E, P2RF-@-S and P2RF-@-PU. The Relays bear the CE Marking.
2. Refer to Connecting Sockets, below, for applicable Socket models.
3. When ordering, add the rated coil voltage and "(S)" to the model number. Rated coil voltages are given in the coil ratings table.
Example: G2R-1-S 12 VDC (S)
Rated coil voltage

1
 G2R-@-S (S)

Accessories (Order Separately)

Connecting Sockets
Track/surface-mounting Socket Back-mounting Socket
Push-In Plus
Applicable Relay model Screw terminals * PCB terminals Solder terminals
Terminal Blocks
No. of poles Model Models Models Model
P2RFZ-05-E
P2R-05P
1 pole G2R-1-S (S) P2RF-05-PU P2RF-05 P2R-05A
P2R-057P
P2RF-05-E
P2RFZ-08-E
P2R-08P
2 poles G2R-2-S (S) P2RF-08-PU P2RF-08 P2R-08A
P2R-087P
P2RF-08-E
* The structure of P2RF-@-E models provides finger protection. Round terminals cannot be used. Use forked crimp terminals.

Accessories for Push-In Plus Terminal Block Sockets (P2RF-@-PU)

Short Bars
Pitch No. of poles Colors Model * Minimum order (quantity)
2 PYDN-7.75-020@
3 PYDN-7.75-030@
7.75 mm Red (R)
4 Blue (S) PYDN-7.75-040@ 10
Yellow (Y)
20 PYDN-7.75-200@
15.5 mm 8 PYDN-15.5-080@
Note: Use the Short Bars for crossover wiring within one Socket or between Sockets.
* Replace the box (@) in the model number with the code for the covering color.

Labels
Minimum order (sheet)
Model
(quantity per sheet)
5
XW5Z-P4.0LB1
1 sheet (60 pieces)

Accessories for Screw Terminal Sockets (P2RFZ-@-E)

Short Bars
Pitch No. of poles Colors Model Minimum order (set)
6.8 mm 10 P2DN-6.8-100S 1
Blue (S) One set (order unit) contains
15.7 mm 10 P2DN-15.7-100S 10 short bars and 20 caps.
Note: 1. Use the Short Bars for crossover wiring within one Socket or between Sockets.
2. Cannot be used on the P2RF-@-E.

Labels
Minimum order (sheet)
Model
(quantity per sheet)
5
XW5Z-P2.5LB1
1 sheet (72 pieces)

Accessories for Short Bars (P2DN)

Cap
Model Minimum order (bag)
1
P2DN-CP100
(100 pcs./bag)

Mounting Tracks
Minimum order
Applicable Socket Description Model (quantity)
50 cm (l) × 7.3 mm (t): PFP-50N
Mounting track 1 m (l) × 7.3 mm (t): PFP-100N ---
Track-connecting Socket 1 m (l) × 16 mm (t): PFP-100N2
End plate *1 PFP-M
10
Spacer PFP-S
Back-connecting Socket Mounting plate *2 P2R-P 1
*1. When mounting DIN rail, please use End Plate (PFP-M).
*2. Used to mount several P2R-05A and P2R-08A Connecting Sockets side by side.

2
 G2R-@-S (S)
Specifications
Coil Ratings
Must Must
Coil inductance (H) Max.
Rated current* operate release Power
Coil (ref. value) voltage
Rated voltage voltage voltage consumption
resistance
Armature Armature (approx.)
50 Hz 60 Hz % of rated voltage
OFF ON
24 V 43.5 mA 37.4 mA 253 Ω 0.81 1.55
48 V 21.8 mA 18.8 mA 1,040 Ω 3.12 6.17
110 V 9.5 mA 8.2 mA 5,566 Ω 13.33 26.83
AC 80% max. 30% max. 110% 0.9 VA at 60 Hz
120 V 8.6 mA 7.5 mA 7,286 Ω 16.13 32.46
230 V 4.4 mA 3.8 mA 27,172 Ω 72.68 143.90
240 V 4.2 mA 3.7 mA 27,800 Ω 90.58 182.34

Must Must
Coil inductance (H) Max.
operate release Power
Coil (ref. value) voltage
Rated voltage Rated current* voltage voltage consumption
resistance
Armature Armature (approx.)
% of rated voltage
OFF ON
6V 87.0 mA 69 Ω 0.25 0.48
12 V 43.2 mA 278 Ω 0.98 2.35
DC 70% max. 15% min. 110% 0.53 W
24 V 21.6 mA 1,113 Ω 3.60 8.25
48 V 11.4 mA 4,220 Ω 15.2 29.82

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with tolerances of +15%/-20% for the AC rated current
and ±10% for the DC coil resistance.
2. The AC coil resistance and inductance values are reference values only (at 60 Hz).
3. Operating characteristics were measured at a coil temperature of 23°C.
4. The maximum voltage is the maximum possible value of the voltage that can be applied to the relay coil.
It is not the maximum voltage that can be applied continuously.

Contact Ratings
Number of poles 1 pole 2 poles
Resistive load Inductive load Resistive load Inductive load
Load
(cosφ = 1) (cosφ = 0.4; L/R = 7 ms) (cosφ = 1) (cosφ = 0.4; L/R = 7 ms)
10 A at 250 VAC; 7.5 A at 250 VAC; 5 A at 250 VAC; 2 A at 250 VAC; 3 A at
Rated load
10 A at 30 VDC 5 A at 30 VDC 5 A at 30 VDC 30 VDC
Rated carry current 10 A 5A
Max. switching voltage 440 VAC, 125 VDC 380 VAC, 125 VDC
Max. switching current 10 A 5A
2,500 VA, 1,875 VA, 1,250 VA, 500 VA,
Max. switching power
300 W 150 W 150 W 90 W
Failure rate (reference value) * 100 mA at 5 VDC 10 mA at 5 VDC
Note: P level: λ60 = 0.1 x 10-6/operation
* This value was measured at a switching frequency of 120 operations per minute.

3
 G2R-@-S (S)

Characteristics
Item 1 pole 2 poles
Contact configration SPDT
Contact structure Single
Contact resistance 100 mΩ max.
Operate (set) time 15 ms max.
AC: 10 ms max.; DC: 5 ms max. AC: 15 ms max.; DC: 10 ms max.
Release (reset) time
(w/built-in diode: 20 ms max.) (w/built-in diode: 20 ms max.)
Max. operating Mechanical: 18,000 operations/hr
frequency Electrical: 1,800 operations/hr (under rated load)
Insulation resistance 1,000 MΩ min. (at 500 VDC)
5,000 VAC, 50/60 Hz for 1 min between coil and
5,000 VAC, 50/60 Hz for 1 min between coil and contacts;
contacts;
Dielectric strength * 3,000 VAC, 50/60 Hz for 1 min between contacts of different polarity
1,000 VAC, 50/60 Hz for 1 min between contacts of
1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity
same polarity
Destruction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Vibration resistance
Malfunction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude)
Destruction: 1,000 m/s2
Shock resistance
Malfunction: 200 m/s2 when energized; 100 m/s2 when not energized
Mechanical: AC coil: 10,000,000 operations min.;
Endurance DC coil: 20,000,000 operations min. (at 18,000 operations/hr)
Electrical: 100,000 operations min. (at 1,800 operations/hr under rated load)
Ambient temperature Operating: –40°C to 70°C (with no icing or condensation)
Ambient humidity Operating: 5% to 85%
Weight Approx. 20 g
Note: Values in the above table are the initial values.
* These values are relay only. Prease refer to the “Products Related to Common Sockets and DIN Tracks Data Sheet” for connecting sockets.

Approved Standards
UL 508 (File No. E41643) IEC/VDE (Certificate No. 40015012 EN 61810-1)
Contact Opera- Contact
Model Coil ratings Contact ratings Coil ratings Contact ratings Operations
form tions form
10 A, 30 VDC (resistive) 6, 12, 24, 48 VDC 5 A, 440 VAC (cosφ = 1.0)
100 × 103
G2R-1-S (S) SPDT 10 A, 250 VAC (general use) 1 pole 24, 110, 120, 230, 10 A, 250 VAC (cosφ = 1.0) 100 × 103
25 × 103 240 VAC 10 A, 30 VDC (0 ms)
5 to 110 VDC TV-3 (NO contact only)
6 to 240 VAC 5 A, 30 VDC (resistive) 6, 12, 24, 48 VDC
100 × 103 5 A, 250 VAC (cosφ =1.0)
5 A, 250 VAC (general use) 2 poles 24, 110, 120, 230, 100 × 103
G2R-2-S (S) DPDT 5 A, 30 VDC (0 ms)
240 VAC
TV-3 (NO contact only) 25 × 103
LR
CSA 22.2 No.0, No.14
Number
(File No. LR31928) of poles
Coil ratings Contact ratings Operations

Contact Opera- 10 A, 250 VAC (general use)

Model Coil ratings Contact ratings
form tions 5 to 110 VDC 7.5 A, 250 VAC (PF0.4)
1 pole 100 × 103
6 to 240 VDC 10 A, 30 VDC (resistive)
10 A, 30 VDC (resistive)
100 × 103 5A, 30VDC (L/R=7ms)
G2R-1-S (S) SPDT 10 A, 250 VAC (general use)
5 A, 250 VAC (general use)
5 to 110 VDC TV-3 (NO contact only) 25 × 103
5 to 110 VDC 2 A, 250 VAC (PF0.4)
6 to 240 VAC 5 A, 30 VDC (resistive) 2 poles 100 × 103
100 × 103 6 to 240 VDC 5 A, 30 VDC (resistive)
G2R-2-S (S) DPDT 5 A, 250 VAC (general use) 3A, 30VDC (L/R=7ms)
TV-3 (NO contact only) 25 × 103

4
 G2R-@-S (S)
Engineering Data
Maximum Switching Power
G2R-1-S (S) G2R-2-S (S)
100 100

AC inductive load AC resistive

(cosφ = 0.4)
Switching current (A)

Switching current (A)

load
AC inductive load
(cosφ = 0.4) AC resistive
10 10 load
DC resistive
load
DC resistive
load
DC inductive load
1 (L/R = 7 ms) 1 DC inductive load
(L/R = 7 ms)

0.1
1 10 100 1000 0.1
1 10 100 1000
Switching voltage (V) Switching voltage (V)

Endurance
G2R-1-S (S) G2R-2-S (S)
5,000 10,000
Endurance (x103 operations)

Endurance (x103 operations)

5,000

250-VAC/30-VDC
1,000 resistive load
1,000
500 250-VAC inductive load 30-VDC inductive load (L/R = 7ms)
(cosφ = 0.4) 500
250-VAC/30-VDC
resistive load

100 100
30-VDC inductive load (L/R = 7ms)
50 250-VAC
50 inductive load
(cosφ = 0.4)

Switching current (A) Switching current (A)

Ambient Temperature vs Maximum Coil Voltage

Maximum voltage (%)

DC coil

AC coil

Ambient temperature (°C)

5
 G2R-@-S (S)
Dimensions (Unit: mm)

Note: All units are in millimeters unless otherwise indicated.

SPDT Relays
G2R-1-S (S), G2R-1-SN (S), G2R-1-SNI (S) Terminal Arrangement/Internal Connections
G2R-1-SD (S), G2R-1-SND (S), G2R-1-SNDI (S) (Bottom View)

G2R-1-S (S) G2R-1-SD (S) (DC)

29 max. 1 1
13 max.

5 2 4 3 5 2 4 3

35.5 max.
G2R-1-SN (S), G2R-1-SNI (S) (AC) G2R-1-SN (S), G2R-1-SNI (S) (DC)
20

1 1
DC
5

24V
1

0.5 4.75 5 2 4 3 5 2 4 3
7.5

G2R-1-SND (S), G2R-1-SNDI (S) (DC)

5.2 5.2
17.5
1

5 2 4 3

DPDT Relays
G2R-2-S (S), G2R-2-SN (S), G2R-2-SNI (S) Terminal Arrangement/Internal Connections
G2R-2-SD (S), G2R-2-SND (S), G2R-2-SNDI (S) (Bottom View)
G2R-2-S (S) G2R-2-SD (S) (DC)

1 2 3 4
29 max. 13 max. 1 2 3 4

8 7 6 5
8 7 6 5
35.5 max.

G2R-2-SN (S), G2R-2-SNI (S) (AC) G2R-2-SN (S), G2R-2-SNI (S) (DC)
20

1 2 3 4 1 2 3 4

0.5 2.5
6.2

8 7 6 5 8 7 6 5
2.4
8.9
7.4

G2R-2-SND (S), G2R-2-SNDI (S) (DC)

5 5
19.4 1 2 3 4

8 7 6 5

6
 G2R-@-S (S)

Track/Surface Mounting Sockets

P2RF-05-PU 57.5
Terminal Arrangement/
Internal Connection Diagram
(Top View)
53.1 Mounting Hole
A2 A1
30.8
(1) (5) Dimensions
28.1
(4.2) 25.6

Two M3 screw
holes or
two 3.5-dia. holes

108
90 35.3
12
(2)
14
27.35 (3)
11
(4)

Note: Pull out the hooks to

(4.2) 3.9 25.6 Note: The numbers in mount the Socket
15.5
34.3 parentheses are with screws.
43 traditionally used
52.1 terminal numbers.

P2RF-08-PU 57.5

Terminal Arrangement/
Internal Connection Diagram
(Top View)
53.1
30.8 Mounting Hole
A2 A1
28.1
(1) (8) Dimensions
(4.2) 25.6

Two M3 screw
holes or
two 3.5-dia. holes

90 35.3 108

12 22
(2) (7)
27.35 14 24
(4) (5)

11 21
(4.2) 3.9 25.6 (3) (6) Note: Pull out the hooks to
15.5 34.3 mount the Socket
43
Note: The numbers in with screws.
52.1 parentheses are
traditionally used
terminal numbers.

Accessories for P2RF-@-PU No. of Maximum

Application Pitch L (Length) Colors Model *
Short Bars poles carry current
PYDN-7.75-@@ (7.75 mm) 2 15.1 PYDN-7.75-020@
3.90 For Contact 3 22.85 PYDN-7.75-030@
L terminals 7.75 mm Red (R)
(common) 4 30.6 PYDN-7.75-040@
Blue (S) 20 A
18.5 20 154.6 Yellow (Y) PYDN-7.75-200@
12
For Coil
15.5 mm 8 115.85 PYDN-15.5-080@
terminals
2.25 1.57
* Replace the box (@) in the model number with the code for the covering color.
Note: 1. Use the Short Bars for crossover wiring within one Socket or between Sockets.
PYDN-15.5-080@ (15.5 mm) 2. When using short bar to coil terminals of PYF-@@-PU, make sure to use PYDN-31.0-
3.90
080@ (31 mm).
115.85 When using short bar to coil terminals of P2RF-@@-PU, make sure to use PYDN-15.5-
080@ (15.5 mm).
18.5
12

2.25 1.57

7
 G2R-@-S (S)

P2RFZ-05-E
Terminal Arrangement/ Mounting Hole
5-M3X8 48 max. 2 Internal Connection Diagram Dimensions
(Top View)
3.2-dia. hole

(42.3) 10.5
39.5

78.5 max. 39.5±0.1

(35.8)
3.5-dia.
hole 35.5
M3 or
3.5-dia.
hole
17.2
4
31 max.
16 max.
61 max.

P2RFZ-08-E
Terminal Arrangement/ Mounting Hole
8-M3X8 48 max. 2 Internal Connection Diagram Dimensions
2 (Top View) 3.2-dia. hole

10.5
(42.3)
39.5

78.5 max. 39.5±0.1

(35.8)
3.5-dia.
hole 35.5 M3 or
3.5-dia.
hole
17.2
4
31 max.
16 max.
61 max.

Accessories for P2RFZ-@-E

Short Bars
P2DN-6.8-100S (6.8 mm) 15.7±0.1
Maximum carry current: 20A 6.8±0.1
2.9 9

15.4 max.
8.7 max.

152.7 max.
2.5 max.

P2DN-15.7-100S (15.7 mm)

2.9 15.7±0.1
Maximum carry current: 20A
1.6-dia. 9

15.4 max.
8.7 max.

152.7 max.
2.5 max.

Note: Each Short Bar set comes with 20 Caps.

Accessories for P2DN

Cap
5.2 max.
P2DN-CP100

4 max.

6 max.

8
 G2R-@-S (S)

P2RF-05-E
7±0.2
Terminal Arrangement Mounting Holes
2 (Top View) (for Surface Mounting)
Five, M3.5´7 48 max.

3.2-dia.
4 (11) hole
2
39.5 (12)
3 (14)
85.5 max. 35.5 39.5±0.1

3.5-dia.
hole
M3 or
5
3.5-dia.
(A1) 1 hole
(A2)
4 11.5
16.0 max. 61 max.
Note: Pin numbers in parentheses apply to DIN standard.

P2RF-08-E
6 +0.2
−0.1

Terminal Arrangement Mounting Holes

(Top View) (for Surface Mounting)
2
2 1.5 Eight, M3´8 48.0 max. 3
(21) 6 3 (11) 3.2-dia.
(22) 7 2 (12) hole
39.5 (24) 5 4 (14)
35.5
85.5 39.5±0.1
max.

3.5-dia. hole 8
(A1) M3 or
1
3.5-dia.
(A2) hole
4 11.5
61.0
max.
16.0 max.

P2RF-05 2
7 Terminal Arrangement Mounting Holes
Five, M3.5 x 8 (Top View) (for Surface Mounting)
4-dia. holes 4.2-dia. hole

71.5 max. 35.5

30±0.05

4 19.5
M3 or 3.2-dia.
19.5 max. 30 max.
hole
54 max.

P2RF-08
2
7
Eight, M3.5 x 8 Terminal Arrangement Mounting Holes
4-dia. holes (Top View) (for Surface Mounting)
4.2-dia. hole

71.5 max. 35.5

30±0.05

19.5
4
19.5 max. 30 max. M3 or 3.2-dia.
54 max. hole

9
 G2R-@-S (S)

Mounting Height of Relay with Track/Surface Mounting Sockets

P2RF-05-PU G2R-@-S (S) P2RF-08-PU G2R-@-S (S)
Relay Relay

P2RF-05PU P2RF-08PU
Socket Socket

63.6 63.6

28.1 28.1

(3.9) (3.9)

P2RFZ-E
G2R-@-S (S)
Relay

P2RFZ-@-E
Socket

67.0 70.5

P2RF-@ P2RF-@-E G2R-@-S (S)

G2R-@-S (S) Relay
Relay
P2RF-@-E
Socket
P2RF-@
Socket

67.0 70.5
66.5 62.0

10
 G2R-@-S (S)

Back-connecting Sockets
Terminal Arrangement Mounting Holes
P2R-05P (1-pole) (Bottom View)
14.5 max. Tolerance: ±0.1
1 4 7
4
Five,
6 1.6-dia.
4.5 holes
6
15 35.5 max.
1.2 4.5
4 15
3.5

1.5 4
(5)
7 4
7

36.5 max.

P2R-08P (2-pole)
Terminal Arrangement Mounting Holes
4 14.5 max.
7 (Bottom View)
0.3
7.5 Eight, 1.3-dia. holes

5
5
35.5 max. 5
20
1 5

2.8 20

1.5
(4.3)
7.5

Terminal plate thickness: 0.3 36.5 max.

4.5
P2R-05A (1-pole) 7.5
14.5 max.
1.2
0.3

Terminal Arrangement
6.7 (Bottom View)
3.8
16.7 5 35.5 max.

Panel Cutout
Five, 3 x 1.8-dia. holes

13.6±0.1
6

Terminal plate thickness: 0.3 36.5 max.

30.5±0.2
P2R-08A (2-pole) 6.5 7.5 14.5 max.
1.2
0.3

5
5
35.5 max. Recommended thickness of
20
2.6 the panel is 1.6 to 2.0 mm

2.8
1.5
Eight, 3 x 1.2-dia. holes

7.5

Terminal plate thickness: 0.3 36.5 max.

11
 G2R-@-S (S)

P2R-057P (1-pole) 14 max. 16.4 Terminal Arrangement Mounting Holes

8.7 10.4 3.5 (Bottom View)
0.7 1 1 4±0.1 Five,
1.6-dia.
6 holes
4.5 6±0.1
37 max.29.6 15
4
4.5±0.1 15±0.1
1 8.75

8.7 4±0.1
7.4
5

7±0.1
41 max.

P2R-087P (2-pole) 14 max. 16.4 Terminal Arrangement Mounting Holes

7.5 10.4 3.5 (Bottom View)
1 Eight,
0.3
7.5 1.3-dia.
5 holes
5
37 max. 29.1 1 20 5
5
8.1
20

8.9 7.4
(8.1)

41 max.

Mounting Height of Relay with Back-connecting Sockets

P2R-@P P2R-@A P2R-@7P

G2R-@-S (S) Relay

G2R-@-S (S) Relay
G2R-@-S (S) Relay
44.5 47.5
P2R-@P 38.0
Socket P2R-@A
Socket P2R-@7P
Socket

Mounting Tracks
PFP-100N, PFP-50N PFP-100N2

16
7.3±0.15
4.5
4.5
35±0.3 27±0.15 35±0.3 27 24 29.2

15 25 25 25 25 15 25 25 25 25 15 1 1.5
15 (5) 1 10 10
10 10
1,000 (500) 1,000

It is recommended to use a panel 1.6 to 2.0 mm thick.

12
 G2R-@-S (S)

End Plate Spacer

16
PFP-M 10
PFP-S 5 12
6.2
1.8

1
50 35.5 35.3 34.8
1.8 44.3

11.5 1.3
10
M4 x 8 pan 4.8
16.5
head screw

Mounting Plate

P2R-P
90
R2.25 4.5 13.6
10-

3.4

49 42±0.1 30.5

18±0.15 18±0.15 18±0.15 18±0.15

9±0.1 72±0.2 9±0.1 t=1.6 mm

13
 G2R-@-S (S)
Safety Precautions
Be sure to read the Common Precautions for All Relay in the website at the following URL:
http://www.ia.omron.com/.
Refer to Products Related to Common Sockets and DIN Tracks for precautions on the applicable Sockets.
Refer to PYF-@@-PU/P2RF-@@-PU for precautions on Push-In Plus Terminal Block Sockets.

Warning Indications • When cutting with a tool, insert the tool from the plastic part and cut
along the slot in the plastic part between terminals. If you cut a part
Indicates a potentially hazardous other than the slot in the plastic part between terminals, it may not
situation which, if not avoided, may result
CAUTION in minor or moderate injury or in property
be possible to attach the insulating cap.
damage.
Supplementary comments on what to do
Precautions for or avoid doing to prevent failure to
Correct Use operate, malfunction, or undesirable
effects on product performance.

Cation
• Do not use the test button for any purpose other than testing. Be
sure not to touch the test button accidentally as this will turn the
contacts ON. Before using the test button, confirm that circuits, the
load, and any other connected item will operate safely. • When using a cut short-circuit bar (P2DN), always use the provid-
• Check that the test button is released before turning ON relay cir- ed cap to protect the charger part.
cuits.
• If the test button is pulled out too forcefully, it may bypass the mo-
mentary testing position and go straight into the locked position.
• Use an insulated tool when you operate the test button.

Precautions for Correct Use

About the Built-in Diodes • The proper orientation for installing the short-circuit bar is with the
The diodes that are built into the Relays are designed to absorb molded part facing inward.
reverse voltage from the Relay’s coil. If a large surge in voltage is
applied to the diode from an external source, the element will be
destroyed.
If there is the possibility of large voltage surges that could be applied
to the elements from an external source, take any necessary surge
absorption measures.

Latching Levers
• Turn OFF the power supply when operating the latching lever.
After you use the latching lever always return it to its original state.
• Do not use the latching lever as a switch.
• The latching lever can be used for 100 operations minimum.

Relay Replacement • Use the short-circuit bar to short-circuit two or more coil terminals,
or two or more contact COM terminals.
To replace the Relay, turn OFF the power supply to the load and
• Do not use a deformed short-circuit bar. Risk of failure, malfunc-
Relay coil sides to prevent unintended operation and possible
tioning, or deterioration of characteristics.
electrical shock.
• In socket terminals, insert the short-circuit bar in the correct orien-
Coil tape color tation all the way into all terminals, and then secure with screws.
Pink tape is used for the AC coil type and blue tape is used for the DC • Install the short -circuit bar before wiring.
coil type, making it easy to distinguish AC and DC.
Equivalent Labels from Other Companies and
Using a short-circuit bar Recommended Label Printers
• Use the short-circuit bar that is suitable for the socket you are using
Use the following label printer.
and the location of use.
The following table gives the manufacturer’s model number as of
• Note that the P2DN short-circuit bar for the P2RFZ-E Socket has
March 2017.
both a short-circuit bar for shorting coil terminals and a short-circuit
bar for shorting contact COM terminals. Manufacturer Omron
Phoenix
Weidmuller Cembre
• The short-circuit bar can be cut to match any number of poles. Cut Contact
with a tool as appropriate for the number of relays and sockets. MG-CPM-04
XW5Z-P4.0LB1 UCT-TM6 MF 10/6
When using a cut short-circuit bar, take care to avoid injuring your- Label 41391
self on the cut surface. XW5Z-P2.5LB2 UCT-TMF5 --- ---
BLUEMARK
PrintJet
CLED,
ADVCANCED,
THERMOMA
Plotter MCP Markingenius
Label printer --- * RK CARD
Plus, MG3
SET PLUS,
Plotter MCP
THERMOMA
Basic
RK CARD
* When using a printing tool, use a Phoenix Contact label printer.
Note: Ask the label manufacturer or printer manufacturer for details.

14
 Terms and Conditions Agreement
Read and understand this catalog.
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you
have any questions or comments.

Warranties.
(a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship
for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron
disclaims all other warranties, express or implied.
(b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT
NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER
ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE
PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE.
Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the
Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron’s sole obligation hereunder shall be, at
Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or
replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount
equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty,
repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products
were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate
modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall
not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or
electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice,
recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above
warranty.
See http://www.omron.com/global/ or contact your Omron representative for published information.

Limitation on Liability; Etc.

OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES,
LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS,
WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY.
Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted.

Suitability of Use.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself
is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine,
system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product
with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE
QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS,
AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE
OVERALL EQUIPMENT OR SYSTEM.

Programmable Products.
Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence
thereof.

Performance Data.
Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining
suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate
it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability.

Change in Specifications.
Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our
practice to change part numbers when published ratings or features are changed, or when significant construction changes are
made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers
may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at
any time to confirm actual specifications of purchased Product.

Errors and Omissions.

Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is
assumed for clerical, typographical or proofreading errors or omissions.

2019.9
In the interest of product improvement, specifications are subject to change without notice.

OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2019 All Right Reserved.