The Ultimate Solution

for your Machine Tool

With over 25 years of experience in providing solutions for Its open architecture makes it easier for the users to
shop floor automation FAGOR AUTOMATION introduces integrate their own programming cycles and application
the all new 8070 CNC with revolutionary new hardware software.
and host of new features to meet your current and future
machining requirements. The control of position, velocity, accelerations and collisions
prevents undesired machining and help achieve unmatched
The operating and programming ease of FAGOR CNC's part-finish and maximum performance from the machine
results in considerable time savings in training, as well as without compromising the speed thanks to the various
daily programming and machining. smart algorithms and very fast block processing time.
At each operating mode of the 8070 CNC, it is possible
to select the most relevant data screen and even customize Features like tool calibration and block search help the
a new one with only the most relevant data. operator check and replace the tool after interrupting a
program or after an execution error.
A part-program may be simulated graphically and executed
while executing another part-program. The FAGOR 8070 CNC simulator permits editing and
It offers cycles for tool calibration, part measuring, milling simulating the program away from the noise and distractions
operations (pre-emptied pockets, irregular pockets with of the manufacturing plant and later send that program to
islands, etc.) and turning operations (C axis, Y axis, etc.). the CNC for execution using High speed Ethernet Interface.

System
Configuration
Spindle motors

Remote modules

Kinematics management

Tool magazine

Measuring cycles

Tool calibration by Laser

Incremental or absolute feedback

Sercos digital interface

2 Axis motors
State-of-the-art CNC

The FAGOR 8070 is a state-of-the-art CNC that offers

high tech features with maximum operating versatility. This
powerful CNC has been designed by combining FAGOR's
experience and technology with worldwide Industrial PC
standards.
It can control up to 28 axes (interpolated simultaneously),
4 spindles, 4 tool magazines and 4 execution channels.

Monitor
Monitor with either a 10.4" or a 15" TFT screen.

Keyboard
It has keys with easy-to-understand symbols (icons),
hotkeys for quick access to work modes and freely
customizable keys to configure them according to the
requirements of the machine.

CNC

Hotkeys
Automatic mode.

Handwheels Jog mode.

MDI mode.

Editing - simulation mode.

Ethernet User defined tables as well as offset and fixture tables.

Tool table and tool magazine table.

Utility mode.

Access to applications.
Simulator on PC 3
 8070 M CNC

For Milling Machines The FAGOR 8070 CNC is ideal for controlling all kinds of
milling machines and machining centers both horizontal and
and Machining Centers vertical.

It is especially designed for machining high precision contours

with a block processing time lower than 1 ms. Its acceleration
and jerk control smoothes the tool path changes and reduces
mechanical stress on the components of the machine thus
making them more durable.

It offers filters that eliminate oscillations due to the machine's

own frequencies and preventing them from negatively affecting
the machining operations and reducing the mechanical stress
on the system.

By utilizing an advance tool path analysis feature, it makes it

possible to optimize the feed rate as well as a smoother and
continuous movement of machine axes.

4
 High speed machining

The high speed algorithms optimize machining by obtaining The CNC works with nano-metric
higher cutting speed, smoother contours, better part surface resolution: In order to obtain the
finish, greater accuracy and better reproduction of the best part finish, the CAD-CAM
programmed surface. coordinates should be defined
with the maximum resolution
By combining splines and polynomial transitions, it uses straight possible.
paths to adapt the programmed contour to a curve that goes
through all the programmed points.

Improved Production Process

The Ethernet connection helps improve the production process

by transmitting part-programs, previously created in the
Programming Office, to the CNC for their execution.
It is also possible to monitor the machining time for statistical
calculation, dead time, usage of each tool, etc.

Backwards compatibility

It is possible to edit new programs, or modify existing ones, in ISO format or in FAGOR's high level language with the help of a
profile editor, a canned-cycle editor and Teach-in programming.

It allows execution of programs created with FAGOR 8040, 8050 or 8055 CNC, thus not being necessary to program the same
parts again for the 8070 CNC. Those programs can also be modified at the 8070 CNC maintaining the same original format
and may be used on other machines of the shop that are equipped with FAGOR 8040, 8050 and 8055 CNC's.

Working with CAD-CAM

For those using Autocad, the 8070 CNC converts the generated 2D files directly
into DXF files so they can be used later on as profiles or as part of a part-program.

If the machining program is generated in CAM, starting with the drawing of the
part, we recommend to use a post-processor to convert the file into Fagor format.
The CNC interprets the resulting tool path files and executes them directly.

Possibility of production estimate

The simulation permits checking programs by graphically showing its execution.

It also makes an estimate of the total execution time and of the machining time
for each tool.

Background editing / simulation

A program may be edited and simulated even while executing another one, thus
eliminating delays between parts. A canned cycle can also be simulated before
inserting it into the program.
5
 8070 M CNC
For Milling Machines and Machining Centers

Kinematics management

Several kinematics may be defined to better adapt to the

requirements of the machine.

It admits parallel kinematics; spherical, orthogonal and

angular spindles; rotary tables and the combination of
swinging spindles and rotary tables.

It also admits specific kinematics used by specific machines

and provides the right tools to define them easily.

Incline plane machining

It is possible to machine in incline planes without having

to loosen and wedge the part. Once the tool has been
manually or automatically oriented, it is enough to define
the incline plane and carry out all kinds of machining
operations; pockets, rotations, etc.

From that moment on, the machining is programmed

according to the new incline plane (X,Y) and the tool along
the axis (Z) perpendicular to it.

5-axis machining (RTCP)

The RTCP (Rotation Tool Center Point) function improves

part finish by making the tool tip follow the programmed
profile regardless of the length and orientation of the tool.

When working with RTCP and changing the orientation of

the tool, the CNC moves the X, Y, Z axes to maintain the
position of the tool tip on the part.

Using RTCP, a profile may be machined maintaining the

tool perpendicular to the tool path at all times.

6
 Tool magazine management
Any type of tool magazine may be managed: Turret type,
synchronous with or without changer arm (1 or 2 claws)
and asynchronous. Depending on how the tools are stored
in the magazine, it can control magazines where the tool
may occupy any position (random magazine) or always
the same position (non random magazine).
It is up to the tool manager to change the tool, it knows
which tool occupies each magazine position and each
claw of the changer arm.
It can also manage milling machines and machining
centers with up to 4 tool magazines.

Tool calibration and measuring cycles

The tool calibration cycle helps the operator to calibrate

tools more easily both manually and automatically using
tabletop probes.

By using probes placed on the tool holder spindle, the part

measuring and aligning cycles help adapt easily and
automatically the work coordinates to the actual part position
(hole centering, corner and angle measuring, etc.).

Tandem and Gantry axes

Tandem axes compensate for backlash using two motors

that pull in opposite directions. Both servo systems are
mechanically coupled and the CNC keeps them coupled
in velocity and torque. They are normally used to move
axes with a rack-and-pinion system on large machines.

Gantry axes prevent mechanical slippage on bridge type

milling machines that use 2 axes to move it. When the
Gantry axes are the rack-and-pinion type, they are
associated with the Tandem function, 2 motors on each
axis to achieve a smooth and aligned movement.
7
 8070 T CNC

The FAGOR 8070 CNC can control high production turning

For Lathes and centers, vertical lathes, lathes with an incline bed and parallel
Turning Centers lathes.

Thanks to its high configuration versatility, it can be easily

adapted to the machines governing several turrets, spindles,
execution channels, etc.

Depending on the type of machine, it can control up to 4

spindles and 28 axes; the "C", "Y" and "B" axes among
others and perform milling operations in the planes formed
by all of them.

It offers a variety of filters that eliminate oscillations due to

the machine's own frequencies and preventing them from
negatively affecting the machining operations and reducing
the mechanical stress on the system.

Its acceleration and jerk control smoothes the tool path

changes and reduces mechanical stress on the components
of the machine thus making them more durable.

8
Improved Production Process

The Ethernet connection helps improve the production

process by transmitting part-programs, previously created
in the Programming Office, to the CNC for their execution.

It is also possible to monitor the machining time for statistical

calculation, idle time, usage of each tool, etc.

Changing the
machining operation

With the 8070 CNC, it is very easy to change the machining

on production lathes by simply transferring to the new
CNC the new part-program, the offset and fixture offset
tables for the new fixtures and automatically calibrate the
new tools before machining.

Machining quality

The CNC's algorithms provide higher cutting speeds,

smoother contours, higher surface finish and greater
precision perfectly reproducing the programmed surface
within the tightest tolerances.

Independent axes

All the movements that are not involved in the machining

of the part, such as bar feeders, tailstocks, etc. are
configured as independent axes.

The movements associated with the independent axes are

executed independently and simultaneously while machining
the part.

9
 8070 T CNC
For Lathes and Turning Centers

Home search

After powering up the machine, there is no need to move

the axes to the reference point (home). Using FAGOR distance-
coded feedback systems, the CNC assumes the new position
by simply moving the axes 20 or 50 mm (depending on the
linear encoder). There is no need to move the axes when
using FAGOR absolute feedback systems.

Programming and
operating flexibility
With the help from the profile editor and canned-cycle
editor, it is possible to edit new programs and modify
existing ones as well as those created at a FAGOR 8040,
8050 and 8055 CNC in ISO or FAGOR's high level
language.

When parts of the workpiece must be retouched, the block

search function restores the program history making it
possible to resume the machining operation from a particular
block with the same machining conditions as if the program
were executed from the beginning.

The user can also customize the interface modifying each

screen so they only show the information desired at each
moment.

Tool calibration
and measuring cycles

The tool calibration cycle helps the operator calibrate the

tool easily both manually and automatically.

By using probes, the part measuring cycles help measure

parts or compensate for tool wear easily and automatically.

Automatic tool calibration (cycles integrated into the part-

program) provides better machining time by eliminating idle
time and manual calibration.

10
Thread cutting operations

All kinds of threading are possible besides the typical turning

operations (turning, grooving, facing, etc.). Standard,
longitudinal, taper, on the face, etc. It is also possible to
define the thread entry and exit as well as blending 2 or
more consecutive threads. The thread repair function is
ideal for re-machining worn out threads.

Spindle synchronization

With this feature, a part may be machined in a single fixturing

operation on a lathe with two or more spindles. One side
is machined in one of the spindles and then the part is
switched over to the other spindle to finish machining the
other side.

The switch is done by coupling both spindles in speed and

synchronizing them in position; no home search is required.

Milling operations with the

C and Y axes

Besides the cycles associated with the C axis which allows

machining operations on the face and along the side of
the part on Lathe-Mill type machines that have 4th axis (Y),
the 8070 CNC also offers all the milling operations and
cycles (surface milling, profiling, bosses, 2D and 3D pockets,
etc.).

Kinematics management

Different kinematics may be set on a machine to adapt

perfectly to the geometry of the machine in each case.

The kinematics for the "C", "Y" and "B" are already
implemented, the latter is for turret types that may be used
on milling operations even in inclined surfaces in any of the
spindles.

11
 8070 OL CNC
For General Purpose Applications

The 8070 CNC’s flexible platform adapts itself easily to the application, milling and turning operations may be
all kinds of machines: Grinders, punches, press brakes, combined on the same machine with the possibility of
saws, polishing, woodworking, marble, laser, plasma, using all the machining cycles.
water jet machines, etc.
Being an industrial PC-based CNC, it permits easy
Thanks to its versatility for machine configuration it can integration of third-party applications to replace or
govern up to 28 axes and 4 spindles. Thanks to its 4 complement the CNC's own editor, making it easier for
execution channels, up to 4 different machining operations the operator to program and execute parts.
may be executed in synchronization. When required by

Up to 28 interpolated axes
and 4 spindles
Up to 28 axes may be set so they all interpolate with all those that carry out simple operations parallel to the
each other or have some of them interpolate and others machining operations.
work independently.
It is very easy to set up and control machines that have
Independent axes are those that are not directly involved several tools machining at the same time thanks to the
in the machining of part, like handlers, part loaders and four-spindle configuration.

4 execution channels

Several machining operations may be carried out at the editing, execution, graphics, simulation, etc. It is possible
same time using the various execution channels. Each to create screens showing the information of several
channel may be assigned its own spindle, tool magazine execution channels at the same time or create specific
and certain axes or several execution channels may screens for each channel.
share spindles and tool tables.
The 8070 CNC offers various functions for easily
The 8070 CNC can easily adapt to any user interface synchronizing the various operations to be carried out
by allowing you to modify or create new screens for in different execution channels.

Fast and flexible PLC

The PLC program has a modular structure and can has been edited. It is also possible to monitor the status
combine C language files with files edited in mnemonics of the PLC resources and variables.
and using contacts (ladder diagram). It is executed in
synchronization with the CNC, by executing a full PLC From the PLC, besides controlling the machine
scan within the CNC's loop thus ensuring a fast PLC accessories using inputs and outputs, it is also possible
execution simultaneously with the CNC. to exchange information with the CNC and to generate
periodic velocity commands to execute specific periodic
PLC monitoring permits a quick diagnostics of the applications. It is also possible to monitor certain
machine status. No great knowledge is required because conditions of the machine to execute actions parallel
the PLC program may be monitored both using to the machining of the part when the actions are
mnemonics or contacts, regardless of how the program completed.

12
 Distributed inputs and outputs

The 8070 CNC offers remote modules that may be installed in different areas of
the machine close to the devices being controlled. The remote modules
communicate with each other via CAN BUS and there can be up to 1024 digital
inputs, 1024 digital outputs, 32 analog inputs, 32 analog outputs and 32 feedback
inputs.

It permits integrating third-party software

It is extremely easy to set up and customize the CNC for a particular machine
by adapting the part-program editor and configuring user screens. Hence an
application for a punch press and another one for woodworking may both use
8070 CNC with two unique front ends.

It offers tools for customizing the user interface that allow modifying each CNC
screen and adapt them to the application thus making it easier to program and
execute parts.

Being a PC-based CNC running on Windows®, it allows integrating third-party

applications so the user can edit and execute, from screens created specifically
for it, and perform operations and cycles specific to that machine

Network communication
between several CNC's
When a machine has more than 28 axes or more than 4 spindles, or requires
more than 4 channels several 8070 CNC's may be installed to control all of them.
The communication between the CNC's is made extremely easy through powerful
instructions for fast data exchange and for synchronizing the execution of CNC's.

Electronic cams

It offers a cam editor with graphic assistance to define "cams as a function of

time" and "cams as a function of position" in an easy and flexible way. The cam
editor can also be used to analyze the behavior of the cam for different values
of speed, acceleration and jerk.

Using the "cams as a function of time", it is possible to generate other motion

profiles than trapezoidal or "S-shaped" ones.

Using the "cams as a function of position", it is possible to obtain non-linear

electronic synchronism ratios between two axes. Thus, the position of the slave
axis is synchronized with the position of the master axis using a cam profile.

13
 Functions and Features
8070 General characteristics Industrial PC-based open system.
Windows® XP operating system.
Block processing time < 1 ms.
PLC execution time < 1 ms/K.
512 MB or 1 GB RAM memory.
4 GB, 8 GB or 16 GB compact flash.
Configuration 15" or 10.4" color LCD monitor.
Up to 28 axes (interpolated simultaneously) and 12 handwheels.
Up to 4 spindles.
Up to 4 execution channels. Axes and spindles may be distributed at will between
the channels.
Up to 4 tool magazines.
Digital and analog interface. Sercos® and CAN® field bus.
Ethernet 10/100Mhz base T.
Programming language ISO code programming.
High level programming language.
Cycle editor.
Connectivity USB.
Telediagnosis.
Coordinate system Coordinates in mm and inches.
Absolute and incremental coordinates.
Radius or diameter programming.
Cartesian and Polar coordinate programming.
Leadscrew error compensation, cross compensation, etc.
Tool compensation Tool radius compensation in the work plane and tool length compensation.
Collision detection up to 200 blocks in advance.
Part zero setting Coordinate preset.
Absolute and incremental zero offsets.
Clamps and fixtures.
Polar origin preset.
Programming with respect to machine zero or to part zero.
Machining feedrate Feedrate in millimeters(inches)/minute or millimeters(inches)/revolution.
Setting machining time in seconds.
Feedrate adaptation at the beginning of the block.
Constant feedrate of the tool center.
Constant surface speed (feedrate at the cutting point).
Control of acceleration, Jerk, feed-forward and AC-forward.
Spindle Constant turning speed. Constant surface speed.
Turning speed limitation.
Path control Rapid positioning.
Linear and circular interpolation (programming the center and the radius).
Arc tangent to previous path.
Arc defined with 3 points.
Helical interpolation.
Electronic threading with constant pitch. Rigid tapping.
Manual intervention during execution. Additive manual intervention.
Geometry assistance Square corner.
Controlled round corner (5 ways).
Corner rounding and chamfering.
Tangential entry and output.
Mirror image.
Coordinate system rotation.
Scaling factor.
Milling canned cycles Center punching.
Drilling with variable peck and deep hole drilling with constant peck.
Tapping with a clutch and rigid tapping (without a clutch).
Reaming, Boring.
Rectangular, circular and pre-emptied pocket.
2D and 3D pockets.
Rectangular and circular boss.
Surface milling, Slot milling.
Profile milling.
Turning canned cycles Turning, facing, taper, rounding, grooving.
Drilling (along the side and on the face). Multiple drilling.
Threading (along the side, on the face, taper and thread repair).
Tapping. Rigid tapping. Multiple threading.
Standard threads.
Slot milling (along the side and on the face). Multiple slot milling.
Profile (ZX, ZC and XC).
Dynamic distribution of machining operations.

14
Multiple machining (Milling) In a straight line.
In an arc or in a circle.
In a parallelogram pattern.
In a grid pattern.
Random points.
Probing canned cycles Tool radius and length calibration. Probe calibration.
Canned cycle for measuring the surface, the outside corner, the inside corner.
Canned cycle for measuring the angle, the outside corner and angle.
Hole measuring cycle.
Boss measuring cycle.
Subroutines Local and global subroutines. Modal subroutines.
Define Macros.
Operation with axes and spindles Gantry axes (14 pairs). Tandem axes (14 pairs).
Hirth axes. Independent axes.
Electronic coupling of axes and spindles.
Synchronization of axes and spindles.
Park axes and spindles.
Operation with channels Axis swapping. Spindle swapping.
Communication and synchronization between channels.
C axis Machining on the face of the part.
Machining on the side of the part.
High speed machining Spline interpolation.
Polynomial interpolation.
Anti-resonance post-interpolation filters.
Flow control instructions Block skip ($GOTO).
Conditional execution ($IF) and ($SWITCH).
Block repetition (#RPT) and ($FOR).
Conditional block repetition ($WHILE) and ($DO).
Coordinate transformation Kinematics, up to 6 different ones on a machine.
Incline plane movement.
Tool perpendicular to the plane.
Working with RTCP (Rotating Tool Center Point).
Tool length and radius compensation.
Programming assistance Calculator.
Graphic assistance for cycle programming.
Block comments.
Context dependent integrated manual.
Expandable windows for defining instructions and variables.
Editing Simulation DXF file import.
Profile editor.
Teach-in editing.
Cycle editor in conversational mode.
Simulation with graphics while executing another program.
Simulation of a canned cycle before inserting it into the program.
Time estimate Estimate of the total program execution time and of the machining time with each tool.
Program time estimate in simulation.

Execution Tool inspection while executing the program.

Block search restoring the program history.
MDI/MDA mode.
Graphics Top view, projection in 3 planes, 3D and solid.
Change of the graphics "point of view" to show it from another angle.
ZOOM function without interrupting the program.
Measurement of the distance between two points.
Jog mode Movement using a handwheel or JOG keys.
Move an axis to a coordinate after selecting the target point.
Tool calibration.
Zero offset loading.
Spindle control.
MDI/MDA mode.
Tables Zero offset table (up to 20 different zero offsets).
Fixture table.
Table of global and local parameters per channel.
Table of common parameters for communication between channels.
Tool table and tool magazine table.
Setup assistance Tuning.
Oscilloscope function.
Bode diagram.
Circularity (roundness) test.
Fully customizable Tool for display configuration FGUIM.
Visual Basic®, Visual C++®, etc.
OPC server.
Integrated PLC Up to 1024 digital inputs and 1024 digital outputs.
Up to 8192 marks and 1024 registers.
Up to 256 timers and 256 counters.
Unlimited symbols.
PLC programming languages: Equations, contacts and C language.
Monitoring of CNC resources and variables.
Logic analyzer.
Remote modules Up to 1024 digital inputs and 1024 digital outputs.
Up to 32 analog inputs and 32 analog outputs.
Up to 32 feedback inputs.
15
 Fagor Automation S. Coop.
Bº San Andrés, 19 – P.O.Box 144
E-20500 Arrasate-Mondragón, Spain
Tel. 34 943 719 200
34 943 039 800
Fax: 34 943 791 712 ER-073/1994

Dimensions in mm (inches) E-mail: [email protected]

www.fagorautomation.com
15" 8070 CNC
EUROPE
144.8(5.7) 420(16.53)
DE - Fagor Automation GmbH (Göppingen)
Tel. 49 7161 15 6850 Fax: 49 7161 15 685 79
ES - Fagor Automation Catalunya (Barcelona)
Tel. 34 934 744 375 Fax: 34 934 744 327
FR - Fagor Automation France S.à.r.l. (Clermont Ferrand)

350(13.77)
Tel. 33 473 277 916 Fax: 33 473 150 289
GB - Fagor Automation UK Ltd. (West Midlands)
Tel. 44 1327 300 067 Fax: 44 1327 300 880
IT - Fagor Italia S.R.L. (Milano)
Tel. 39 0295 301 290 Fax: 39 0295 301 298
PO - Fagor Automation Ltda. (Leça da Palmeira)
Tel. 351 229 968 865 Fax: 351 229 960 719
RU - Fagor Automation Russia. (Moscow)
Tel. 7 926 795 29 12

AMERICA
350,6(13,77)

BR - Fagor Automation do Brasil Com. Imp. Exp. Ltda. (São Paulo)

Tel. 55 11 56 94 08 22 Fax: 55 11 56 81 62 71
CA - Fagor Automation Ontario (Mississauga)
Tel. 1 905 670 74 48 Fax: 1 905 670 74 49
Fagor Automation Quebec (Montreal)
Tel. 1 450 227 05 88 Fax: 1 450 227 61 32

70
420,6(16,53) Fagor Automation Windsor (Canada)
(2.75) Tel. 1 519 944 56 74 Fax: 1 519 944 23 69
US - Fagor Automation Corp. (Chicago)
10.4" modular 8070 CNC Tel. 1 847 98 11 500 Fax: 1 847 98 11 311
Fagor Automation West Coast (California)
Tel. 1 714 957 98 85 Fax: 1 714 957 98 91
Fagor Automation East Coast (New Jersey)
Tel. 1 973 773 35 25 Fax: 1 973 773 35 26
Fagor Automation Ohio Branch (Ohio)
Tel. 1 614 855 5720 Fax. 1 614 855 5928
Fagor Automation South East (Florida)
Tel. 1 813 654 45 99 Fax: 1 813 654 3387

ASIA
CN - Beijing Fagor Automation Equipment Co., Ltd. (Beijing)
39,5(1.55)
25(0.98) Tel. 86 10 84505858 Fax: 86 10 84505860
Beijing Fagor Automation Equipment Ltd. (Nanjing)
Tel. 86 25 83 32 82 59 Fax: 86 25 83 32 82 60
Beijing Fagor Automation Equipment Ltd. (Chengdu)
Tel. 86 28 66 13 20 81 Fax. 86 28 66 13 20 82
Beijing Fagor Automation Equipment Co., Ltd. (Guangzhou)
Tel. 86 20 86 55 31 24 Fax: 86 20 86 55 31 25
Beijing Fagor Automation Equipment Co., Ltd. (Shanghai)
10.4" compact 8070 CNC Tel. 86 21 63 53 90 07 Fax: 86 21 63 53 88 40

420(16.53)
HK - Fagor Automation (Asia) Ltd., ( Hong Kong)
136(5.35) Tel. 852 23 89 16 63 Fax: 852 23 89 50 86
IN - Fagor Control System Pvt. Ltd. (Bangalore)
Tel. +91 (0)8042682828 Fax: +91 (0)8042682816
KR - Fagor Automation Korea, Ltd. (Seoul)
Tel. 82 2 21 13 03 41 / 2113 0342 Fax: 82 2 21 13 03 43
350(13.77)
330(12.99)

MY - Fagor Automation (M) SDN.BHD. (Kuala Lumpur)

Tel. 60 3 8062 2858 Fax: 60 3 8062 3858
SG - Fagor Automation (S) Pte. Ltd. (Singapore)
Tel. 65 68417345 / 68417346 Fax: 65 68417348
TW - Fagor Automation Taiwan Co. Ltd. (Taichung)
Tel. 886 4 2 385 1558 Fax: 886 4 2 385 1598

FAGOR AUTOMATION shall not be held responsible for any printing or transcribing errors in this catalog and reserves the right
to make any changes to the characteristics of its products without prior notice.
Fagor Automation holds the ISO 9001 Quality System Certificate
and the CE Certificate for all its products.

Worldwide reliability