Position Title: Design Engineer (Electrical- T&D)

Name: Adarsh Tripathi

Address & Contact Information: F-5, Pushpendra Apartments, Opposite Girls’ High School,
Elgin Road, Civil Lines, Prayagraj, U.P.-211001
Mobile- 8249975305
Email Id- [email protected]
Date of Birth: 13/03/1992
Country of Citizenship: India
Education: Bachelor of Technology – Electrical & Electronics Engineering
Employment record relevant to the assignment:
Period Employing organization and title/position Country Summary of activities performed
and Contact Information For References relevant to the assignment.
March 2024- Organization – Activities Performed-
Till Date Petroexcel Technology Services Pvt Ltd, India, • Preparation & Review of Design &
Vadodara Nigeria Structural Documents and Drawings for
Position – 330KV & 132KV Transmission line.
Design Engineer (Electrical) • Preparation & review of Sag-Tension
Type of employment – Calculations of Conductors/Earth wire
Permanent • Preparation and review of various
Current CTC – Monopoles & Tower Designs &
12 LPA Structural docs using PLS Tower
software.
• Preparing Bidding Documents and
Conducting Construction
Administration for Construction of
Transmission lines and Associated
Substations.
October Organization – USA Activities Performed-
2023- College of Agricultural & Environmental (Remote • Developed a Mathematical Model, using
March 2024 Sciences, Department of Food Science & Working) MATLAB & Data Modelling, for the
Technology, University of Georgia (USA) growth of Bacillus Cereus bacterium,
commonly found in soil, food and marine
Task – sponges.
Data Modelling & Development
March 2021- Organization – Assignments-
September WAPCOS Limited, India India (a) Consultancy Services for Power
2023 Position – Transmission System Planning,
Design Engineer (Electrical) Feasibility Study and Project
Type of employment – Preparation for Major Cities of Nepal
Contract Consolidated (b) Consultancy Services for Design for
Last CTC – Project of Improving the Quality of
09 LPA Power Supply – Transmission
(400KV/110KV/66KV Lines &
Associated Substations), Mozambique.
(c) PMC for 161kV Kara-Mango-Dapaong
transmission line and associated sub-
stations, Togo.
(d) PMC for Construction of 138 kV
Transmission Line -66 km long; 69 kV
Transmission Line - 11 km long; New
Substation at La Esperanza and
Relocation and Expansion of La Gateada
Substation in Nicaragua (ENATREL),
Nicaragua.
(e) Project Management and Construction
Supervision Consultancy Services for
Koshi Corridor 220 kV Transmission
Line Project in Nepal
(f) Construction of a 225 kV (Double
Circuit), 66 kV (Multi circuit/Double
circuit), 33 kV (Single circuit)
Transmission lines and Associated
Substations, Sierra Leone.
(g) Development Of Power Distribution
Projects In Bandundu Province, D R
Congo.
(h) Consultancy Services for Supervision
Engineer for the Construction of
66/33/22kv Transmission and
Distribution Network in Paynesville,
Monrovia, Schefflin and Ria/ Margibi
County and Pleebo to Fish Town and
Two Substations in Schefflin and
Ria/Margibi County for Liberia
Electricity Corporation (LEC), Liberia.
(i) Network Reinforcement and Access
Project (NRAP)-Procurement of Plant,
Design, Supply, and Installation of
Nhlangano II – Lavumisa 132kv
Transmission Lines and Associated
Substations in the Shiselweni Region in
The Kingdom Of Eswatini.
(j) Detailed Project report for Installation
of 75MW Solar PV Parks in Cuba

Activities Performed-
• Preparation & Review of Design &
Structural Documents and Drawings for
Single Circuit, Double Circuit as well as
Multi Circuit Towers and Monopoles of
Transmission line.
• Preparation & review of Sag-Tension
Calculations of Conductors/Earth wire
• Preparation and review of various
Monopoles & Tower Designs &
Structural docs using PLS Tower
software.
• Preparing Bidding Documents and
Conducting Construction
Administration for Construction of
Single Circuit, Double Circuit & Multi
Circuit Transmission lines and
Associated Substations.
March 2016- Organization – India • Worked as a Project Management
March 2021 WAPCOS Limited, India Consultant for the Erection, Testing &
Position Commissioning of new 33/11kV Power
Engineer (Electrical) Substations and Associated Lines under
Type of employment ODSSP Scheme of Govt. Of Odisha.
Contract Consolidated • Overall quality assurance during
erection & commissioning of new
33/11kV substations and lines.
• Support technical and engineering
personnel with project support duties.
• Compile technical reports.
• Develop and maintain technical
statistics and figures.
• Source technical documents,
information and drawings.
• Provide inputs to technical studies,
reports and projects closure planning.
Expertise/Training:
• Persuing GOOGLE Certification self-paced course in ‘Artificial Intelligence & Machine Learning’.
• Expertise in PLS-CADD, PLS Tower and PLS Pole, PVSyst.
• Knowledge of Auto-CAD, Dialux, Revit MEP, Arc-GIS, Global Mapper and Google Earth.
• Training imparted on Automation using RTU-SCADA Operations.
• ‘Smart Grid Training Program for Professionals’ organized by US-AID & NSGM, Ministry of Power, India under
“Partnership to Clean Energy-Deployment (PACE-D)” Technical Assistance Program.
• Development Course ‘Introduction & Advancement to Smart Grid’ from Indian Institute of Technology (IIT),
Roorkee.
• Development Course ‘Hydrogen Energy: Production, Storage, Transportation, Usage & Safety’ from Indian Institute
of Technology (IIT), Bombay under the aegis of ‘National Green Hydrogen Mission’, Government of India.
Language Skills:
Language Read Write Speak
English Excellent Excellent Excellent
Hindi Excellent Excellent Excellent
Odia Excellent Intermediate Excellent

Adequacy for the Assignment:

Detailed Tasks Assigned on Reference to Prior Work/Assignments that Best Illustrates Capability to
Consultant’s Team of Experts : Handle the Assigned Tasks
✓ • Name of 3x1000MW Captive Power Plant at Akwa Ibom, Nigeria-
assignment: Transmission (330kV & 132kV) & Distribution (33kV &
Below) Line Design
✓ Year: March 2024- Till date

✓ Location: Akwa Ibom, Nigeria

✓ Client: Kwale Genco Free Zone Economy (KGFZE)

✓ Main Project Establishment of 330kV & 132kV Transmission Network as
Features: well as 33kV & Below Distribution network
✓ Positions Design Engineer (Electrical)
Held:
✓ Activities • Preparation & Review of Design & Structural Documents
Performed: and Drawings for Transmission & Distribution lines.
• Preparation & review of Sag-Tension Calculations of
Conductors/Earth wire.
• Preparation and review of various Monopoles & Tower
Designs & Structural docs using PLS Tower software.
• Preparing Bidding Documents and participating in
Bidding activities.
• Conducting Construction Administration for Construction
of Transmission lines and Associated Substations.
✓ • Name of Project Management Consultant for Erection, Testing &
assignment: Commissioning of 241 Nos. of 33/11kV Substations &
Associated Lines under Phase-I, II & III, Odisha (ODSSP-
Odisha Distribution System Strengthening Project)
Year: March 2016 To March 2021
Location: Sambalpur under WESCO Utility, Odisha, & Rourkela under
WESCO Utility, Odisha
Client: Odisha Power Transmission Corporation Limited

Main Project Strengthening the power distribution system of Odisha,

Features: reduction in distribution losses due to long distribution
lines, reduced power interruption & improved voltage
supply.
Positions Electrical Engineer / Technical Assistant
Held:
Activities • Worked as a Project Management Consultant for the
Performed: Erection, Testing & Commissioning of new 33/11kV
Power Substations under ODSSP Scheme of Govt. Of
Odisha.
• Overlooking works on a day-to-day basis, ensuring that
work is completed safely, by deadline and to the right
quality standard.
• Overall quality assurance during erection &
commissioning of new 33/11kV substations.
• Monitoring the RTU (Remote Terminal Unit) & SCADA
(Supervisory Control & Data Acquisition System)
commissioning of 33/11kV Substations.
• Support technical and engineering personnel with project
support duties.
• Compile technical reports.
• Develop and maintain technical statistics and figures.
• Source technical documents, information and drawings.
• Ensure that technical tasks are completed in a timely
manner to support the technical personnel for the
 completion of specific piece of work or project.
• Provide inputs to technical studies, reports and projects
closure planning.
• To offer ongoing support to make sure the developments
of the project are handled efficiently.
• Worked as Third-Party Concurrent Evaluation Agency
(TPCEA) representative for Integrated Power
Development Scheme (IPDS) in 05 circles of WESCO zone
in Odisha (a Group 06 state) for reviewing the quality
aspect of various electrical jobs carried out by EPC.
• Name of Project Management Consultancy for 161kV Kara-Mango-
assignment: Dapaong transmission line and associated sub-stations,
Togo.
Year: March 2021- September 2023
Positions Electrical Engineer
Held:
Client: Communauté Electrique du Bénin (CEB), Republic of Togo
Activities • Review of Tower Design Calculation, structural and
Performed: accessories’ drawings.
• Witness of Proto-Testing as well as Factory Acceptance
Tests (FAT) of towers.
• Pre-dispatch Inspection of tower materials, conductors
and other accessories.
• Study & review of Sag-Tension Calculations of
Conductors/Earth wire.
• Study and review of various Tower Designs & Structural
docs using PLS Tower software.
• Name of PMC for Construction of 138 kV Transmission Line -66 km
assignment: long; 69 kV Transmission Line - 11 km long; New
Substation at La Esperanza and Relocation and Expansion
of La Gateada Substation in Nicaragua (ENATREL),
Nicaragua.
Year: March 2021- September 2023
Positions Electrical Engineer
Held:
Client: Empresa Nacional de TransmisiónEléctrica (ENATREL)
Activities • Review of Tower Design Calculation, structural and
Performed: accessories’ drawings.
• Study & review of Sag-Tension Calculations of
Conductors/Earth wire.
• Witness of Proto-Testing as well as Factory Acceptance
Tests (FAT) of towers.
• Pre-dispatch Inspection of tower materials, conductors
and other accessories.
• Name of Project Management and Construction Supervision
assignment: Consultancy Services for Koshi Corridor 220 kV
 Transmission Line Project in Nepal

Year: March 2021- September 2023

Positions Electrical Engineer
Held:
Client: Nepal Electricity Authority

Activities • Review of Tower Design Calculation, structural and

Performed: accessories’ drawings.
• Preparation of different reports/documents as required
for smooth execution of project.
• Study & review of Sag-Tension Calculations of
Conductors/Earth wire.
• Study and review of various Tower Designs & Structural
docs using PLS Tower software.
• Name of (k) Project Management Consultancy for Preparation of
assignment: Detailed Project report & Installation of 75MW Solar
PV Parks in Cuba

Year: March 2018- May 2023

Positions Design Engineer (Electrical)

Held:
Client: ENERGOIMPORT, Ministry of Energy & Mines, Republic of
Cuba
Activities • Preparation of Detailed Project report & Installation of 15
Performed: nos. of 05MW Solar PV Parks in Cuba (Grid Connected as
well as Stand-Alone Parks)
• Name of Power Transmission and Distribution Projects in Kwilu &
assignment: Bandundu Provinces of D R Congo.
Year: March 2021- September 2023

Positions Electrical Engineer

Held:
Client: Ministry of Energy & Water Resources, D R Congo

Activities Review of Tower Design Calculations, Structural as well as

Performed: Accessories drawings pertaining to the following-
• Construction of Power Transmission Line between 33 kV
Double Circuit Line from Kakobola to PK-600, 33 kV Single
Circuit Line Kakobola to Gungu, 66kV Single Circuit Line
from PK-600 to Kikwit and 66kV Single Circuit Line from
PK600 to Idiofa.
• Study & review of Sag-Tension Calculations of
Conductors/Earth wire.
 • Study and review of various Tower Designs & Structural
docs using PLS Tower software.
• Name of Consultancy Services for Supervision Engineer for the
assignment: Construction of 66/33/22kv Transmission and
Distribution Network in Paynesville, Monrovia, Schefflin
and Ria/ Margibi County and Pleebo to Fish Town and
Two Substations in Schefflin and Ria/Margibi County for
Liberia Electricity Corporation (LEC), Liberia.
Year: March 2021- September 2023

Positions Electrical Engineer

Held:
Client: Liberia Electricity Corporation
Activities • Review of Design Calculations as well as Structural
Performed: Drawings for tower and/or Monopole.
• Review of Tower / Monopole accessories.
• Witness of Proto-testing of towers and monopoles.
• Inspection of Factory Acceptance Tests (FAT) of tower
and/or monopole materials, Conductors, Fasteners and
other related material.
• Name of Network Reinforcement And Access Project (NRAP)-
assignment: Procurement Of Plant, Design, Supply, And Installation Of
Nhlangano II – Lavumisa 132kv Transmission Lines And
Associated Substations In The Shiselweni Region In The
Kingdom Of Eswatini.

Year: July 2022- September 2023

Positions Electrical Engineer

Held:
Client: Eswatini Electricity Company

Activities • Preparation of Technical documents for Transmission

Performed: Line packages for bidding documents.
• Preliminary designs, preliminary survey and preliminary
works for Transmission Line & Substations
• Preparation of Transmission Line Profile in PLS-Cadd
utilizing the Raw Survey Data
• Name of Consultancy Services for Design for Project of Improving
assignment: the Quality of Power Supply – Transmission
(400KV/110KV/66KV Lines & Associated Substations),
Mozambique.
Year: March 2022- September 2023
Positions Electrical Engineer
Held:
Client: Electricidade de Moçambique (EDM)
 Activities • Preparation of Technical documents for Transmission
Performed: Line packages for bidding documents.
• Preliminary designs, preliminary survey and preliminary
works for Transmission Lines.
• Name of Consultancy Services for Power Transmission System
assignment: Planning, Feasibility Study and Project Preparation
for Major Cities of Nepal
Year: April 2021- September 2023
Positions Electrical Engineer
Held:
Client: Nepal Electricity Authority (NEA)
Activities • Carrying out the Electricity Demand Forecast studies up to
Performed: the year 2030, 2040 and 2050.
• Desktop studies to identify the required Greenfield
substations & construction/upgradation/augmentation of
existing substations and overhead/underground
transmission lines.
• Site visits for examining the requirement & suitability of
various substations and transmission lines.
• Power Evacuation Studies, assessing constructability and
carrying out Feasibility Studies.
• Preliminary designs of various types of transmission line
towers & monopoles.
• Preparing transmission line profiles using PLS CADD.

Certification:
I, the undersigned, certify that to the best of my knowledge and belief, this CV correctly describes myself, my
qualifications, and my experience, and I am available to undertake the assignment in case of an award. I
understand that any mis-statement or misrepresentation described herein, may lead to my disqualification
or dismissal.

Signature