Scribd
Upload
92 views1 page

Crca 3 X 1245

This document is a test certificate from JSW Steel Limited for cold reduced low carbon steel sheet and strip, confirming compliance with IS 513_PART1 standards. It includes detailed chemical composition and mechanical properties of the product, along with test results. The certificate also states that the product does not contain hazardous substances as per RoHS norms.

Uploaded by

Sonti Mani kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
92 views1 page

Crca 3 X 1245

This document is a test certificate from JSW Steel Limited for cold reduced low carbon steel sheet and strip, confirming compliance with IS 513_PART1 standards. It includes detailed chemical composition and mechanical properties of the product, along with test results. The certificate also states that the product does not contain hazardous substances as per RoHS norms.

Uploaded by

Sonti Mani kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

IS 513_PART1

JSW STEEL LIMITED


Vijayanagar Works, PO- Vidyanagar, Village-Toranagallu,Dist: Bellary,Karnataka-583275,INDIA
Regd. Office: JSW Centre , Bandra Kurla Complex , Bandra (East) , Mumbai - 400 051
TEST CERTIFICATE FOR COLD REDUCED LOW CARBON STEEL SHEET & STRIP
(According to EN 10204 Type 3.1)
CM/L - 3330339
Test Certificate : CRCA/23-24/0003263834 Date : 16.12.2023
To M/S. B.D. Steels Private Limited SO No./ Item : 402144104 / 10
11-6-29 /B PLOT NO 32 SVCIE Product : CRCA
HYDERABAD - 500037 Region: 36 PO No. : RETAIL PRIME
It is certified that the material described below fully conforms to IS 513_PART1. Chemical composition and Mechanical properties of the product, as tested in accordance with the Scheme of
Testing & Inspection contained in the BIS certification marks Licence No. CM/L - 3330339 are as indicated below against each order No. Etc.
(PLEASE REFER TO IS 513_PART1 FOR DETAILS OF SPECIFICATION REQUIREMENTS)
TEST RESULTS
Specification: IS513_PART1_2016 CR2 QTY C% Mn % S% P% Si % Al % N% YS UTS GL (mm) EL% Hard Ra µm

(MT) (Mpa) (MPa) (HRB)

Heat No. Coil No. Nominal Size (MM) Min 0.020 50 31.00 0.70

Mother Coil T X W X L Max 0.1200 0.50 0.035 0.040 0.070 0.0120 240 370 1.60

B531229 23C0CD0000 3.000 X 1245.0 X Coil 21.585 0.0550 0.28 0.009 0.020 0.008 0.053 0.0041 238 321 50 47.10 49.0 1.07

23C0CD0000

Total Weight in Metric Tonnes 21.585 Grand Total of Coils/Pkt/Bundles/Slab 1

This is to certify that the above mentioned product produced & supplied by us, do not contain any radio active element higher than the natural
level and it confirms to Standard Rolling, Dimensional & Weight tolerences. The product or packing material does not contain any hazardous
substances as per RoHS norms.

Delivery ID : 714841891 Legends: Chemistry = Laddle Sample analysis; 1Mpa= 1N/mm2 ; T x W x L = Thickness x Width x Length
YS= Yield Strength ; UTS = Ultimate Tensile Strength, %EL= %ge Elongation on standard gauge length
Invoice No. : 7106321377

GST Invoice No : 23VJ2900449398

Mode of Transport : Rail Authorised Signatory

Vehicle No. :

LC No. : Remarks :

1 /1

You might also like