Installation Guide

Prelude 24 / Prelude Sixty2

Mineral Board / Tegular / Vector
Summary

1 Tools required

2 Room layout

3 Perimeter trim installation

4 Top fixings & hangers

5 Main Runner installation

6 Cross Tee installation

7 Full size tile installation

8 Cut tile installation

1 Tools required
General tools 1.1
1.2 Grid tools 1.3 Tile tools
2 Room Layout
 Planning the layout 2.1

≤ 300 mm ≤ 300 mm ≤ 300 mm ≤ 300 mm ≥ 300 mm ≥ 300 mm ≥ 300 mm ≥ 300 mm

A A
A A
(l) 4500 mm

(l) 4500 mm

(l) 4500 mm

(l) 4500 mm
X No X No Yes Yes

450 mm 450 mm
150 mm 150 mm

A : 600 x 600 mm A : 600 x 600 mm

4500 (l) / 600 = 600 x 7 + 150 x 2 4500 (l) / 600 = 600 x 6 + 450 x 2
2.2 First hanger location 2.3 Direction of the Main Runners

No.1
Max A

max max
600 mm 600 mm

1200 mm
1200 mm

1200 mm
*For alternative hanger and main runner spacing, please contact ITS on 0800 371 849
3 Perimeter trim installation
Angle trim installation 3.1

1 2 3

300
– 45
0mm

*Fixing centres may vary with tile weight and national cde of practice, please contact ITS on 0800 371 849
Shadowline installation 3.2

1 2 3

*Fixing centres may vary with tile weight and national code of practice, please contact ITS on 0800 371 849
Flexible perimeter 3.3
trim installation

1 2 3

*Tighter radii will require smaller fixing centres. First fixings max. 50mm from ends of trim
4 Top fixings & hangers
Prelude 24 TLS / XL2 installation 4.1

1200mm
1200 – 1900mm*

*Hanger and Main Runner centres can vary depending on the tile weight and national code of practice. Please contact ITS on 0800 371 849
Prelude Sixty2 installation 4.2

*Hanger and Main Runner centres can vary depending on the tile weight and national code of practice. Please contact ITS on 0800 371 849
5 Main Runner installation
First Main Runner location 5.1

String lines

1
Main Runner alignment 5.2

X No Yes

X No

Yes
Joining Main Runners 5.3

1 Prelude 24 TLS / XL2

2 Prelude Sixty2
6 Cross Tee installation
TLS 6.1

1 2
X - 5mm

3 4
XL2 6.2

1 2
X - 5mm

3 4
7 Full size tile installation
Board / Tegular installation 7.1
Minimum void of 150mm
Vector installation 7.2

Minimum void of 85mm

A B

C D

1 2 3

A B A B

*All the tiles must be installed in the same direction

8 Cut tile installation
Board 8.1

X + 4mm

1 3

2 1

X
Tegular with angle trim 8.2

2 3

m
9m

Y + 16mm

1 4

Y
Tegular with shadowline 8.3

Z + 7mm

1 3

Z
Vector with angle trim 8.4

Use Vector Border Clips for corner tiles

A B C D

1 2 3

C D
2mm

Y Y + 13mm

*Spacer bars are recommended at the perimeters of all installations to maintain proper tile alignment
Vector with shadowline 8.5

A B C D
Where cut tiles are resting on the trim,
border wedges may be necessary to
maintain correct alignment

1 2 3

A B

Z Z + 3mm

*Spacer bars are recommended at the perimeters of all installations to maintain proper tile alignment