Overbed Table

USER MANUAL

1|Page
Table of Contents

INTRODUCTION ............................................................................................................................ 3
Specifications ............................................................................................................................ 3
Warning / Caution / Note Definition ........................................................................................ 3
OPERATION INSTRUCTIONS ......................................................................................................... 4
Single Top ................................................................................................................................. 4
Flip Top ..................................................................................................................................... 4
SAFE USAGE ILLUSTRATIONS ....................................................................................................... 5
Raising the table ....................................................................................................................... 5
Lowering the table… ................................................................................................................. 5
FLIP TOP OVERBED TABLE ASSEMBLY ...................................................................................... 6-8
Parts List ................................................................................................................................... 6
Parts #’s .................................................................................................................................... 7
Parts #’s (Accessories) .............................................................................................................. 8
PREVENTATIVE MAINTENANCE .................................................................................................. 9
Checklist.................................................................................................................................... 9
Cleaning .................................................................................................................................... 9
SERVICE INFORMATION ............................................................................................................... 9
Single Top ............................................................................................................................... 10
Flip Top ................................................................................................................................... 10
Gas Spring............................................................................................................................... 11
Outer Column Replacement ................................................................................................... 11
Caster Replacement .............................................................................................................. .11

2|Page
INTRODUCTION

Specifications Single Top Flip Top

Base Length 28” 28”
Overall Table Top Length 32” 13.5”
Overall Table Top Width 17” 17”
Minimum Table Top Height 29” 29”
Maximum Table Top
44” 44”
Height
Weight of Table 31 lbs 40 lbs

Warning / Caution / Note Definition

The words WARNING, CAUTION and NOTE carry special meanings and should be carefully
reviewed.

WARNING – Alerts the reader about a situation, which if not avoided, could result in death or
serious injury. It may also describe potential serious adverse reactions and safety hazards.

CAUTION – Alerts reader of a potentially hazardous situation, which if not avoided, may result
in minor or moderate injury to the user or damage to the equipment or other property. This
includes special care necessary for the safe and effective use of the device and the care
necessary to avoid damage to a device that may occur as a result of misuse or abuse.

NOTE – This provides special information to make maintenance easier or important instructions
clearer.

3|Page
OPERATION INSTRUCTIONS

Single Top
1. Pull up on the table top to raise it.
2. To unlock and lower the table top, squeeze handle (A) upwards while guiding the table
top downwards.

Flip Top
1. Pull up on the table top to raise it.
2. To unlock and lower the table top, squeeze handle (A)
upwards while guiding the table top downwards.
3. Lift secondary flip top surface all the way up and release.
The flip top surface will now stay in its extended position.
4. To fold away the flip top surface, raise the secondary
top all the way up and slowly release to let it flip down.

4|Page
SAFE USAGE ILLUSTRATIONS

Raising the table

Gently pull up on the table top using both hands.

Lowering the table

Gently lower the table by placing one hand on the table

top while using the other for controlling the release
handle.

WEIGHT CAPACITY: 100lbs evenly distributed over the main surface

WEIGHT CAPACITY: Flip surface 10 lbs

NOTE: Amico overbed tables have a shock absorbent spring. When pressure is applied, the
table will lower slightly and spring back up when pressure is released.

WARNING: Ensure the table is clear of the bed or any other piece of equipment before
raising/lowering the table or the other piece of equipment to ensure the table does not react.

WARNING: DO NOT USE THE TABLE TO:

- Sit on
- Lean on
- Get in/out of bed
- As a walker

WARNING: Never put children on the table

CAUTION: Do not apply any more than 100 lbs, evenly distributed, to the main surface

CAUTION: Do not apply more than 10 lbs to flip surface at any time

5|Page
FLIP TOP OVERBED TABLE ASSEMBLY

Item Part Name QTY

A Main Table Top 1
B Flip Top 1
C Butt Hinges 2
D Gas Spring Lock Nut 1
E Handle Bracket 1
F Release Handle 1
G Handle Support Pin 1
H Retaining Clip 1
I Support Bracket 1
J Column Guide 2
K Outer Column 1
L Outer Column Cap 1
M Flip Top Support 1
N Gas Spring 1
O Inner Column 1
P Gas Spring Support Pin 1
Q Retaining Clip 1
R Base Plastic Cover 1
S Base Frame 1
T Front Casters 2
U Back Casters 2

Note: Single Top model does not include items; “B”, “C” and “M”.

6|Page
Item Part Number Part Name QTY.

A OT-MAIN-LXX Main Table Top - Laminate 1

A OT-MAIN-TXX Main Table Top - Thermofoil 1

B OT-FLP-LXX Flip Top - Laminate 1

B OT-FLP-TXX Flip Top – Thermofoil 1

C OT-FLP-HINGE Butt Hinges 2

D N/A – PART OF SPRING Gas Spring Lock Nut 1

E OT-PSTN-BRKTG Handle Bracket 1

F OT-PLHDL-X Release Handle 1

G OT-HDL-PIN Handle Support Pin 1

H N/A – PART OF PIN Retaining Clip 1

I OT-TBL-SUPRTX Support Bracket 1

J OT-GUIDE Column Guide 4

K OT-OUTER-XXX Outer Column 1

L OT-COL-CAP Outer Column Cap 1

M OT-FLP-SUPRT-X Flip Top Support 1

N OT-SPRING-S Gas Spring 1

O OT-INR-COLF Inner Column 1

P OT-SPR-PIN Gas Spring Support Pin 1

Q N/A – PART OF PIN Retaining Clip 1

R N/A Base Plastic Cover 1

S OT-BASE-CHNLX U BASE 1

S OT-BASE-HX H BASE 1

T&U OT-CAS-LP Casters – Front & Back 4

7|Page
Accessories:
OT-BSK-100609 – BASKET 10X6X9
OT-BSK-090910 – BASKET 9X9X10
OT-BSK-050504 – BASKET 5X5X4
OT-BSK-ADA – BASKET ADAPTER – FITS ALL BASKETS
OT-VANITY – VANITY DRAWER AND MIRROR

8|Page
PREVENTATIVE MAINTENANCE

Checklist
_____ All fasteners secured
_____ Table top surface intact – not damaged
_____ Optional flip top surface intact – not damaged
_____ Release Handle locking and releasing properly
_____ Table moving up and down when table top lifted or released
_____ All casters secure and swivelling properly
_____ No debris or dirt in casters
_____ Base intact – not damaged

Serial No. ______________ ______________ _______________

______________ ______________ _______________
______________ ______________ _______________

Completed By: _____________________________________ Date: ________________

CAUTION: Do not apply any kind of lubricant to the gas spring. Lubricant will damage the gas
spring.

Cleaning

Amico Patient Care recommends using a mild cleaning agent or detergent to this product.
When a mild cleaning agent or soap is not adequate, follow the instructions provided by the
cleaning product manufacturer for ammonia, bleach, isopropyl alcohol and ammonium chloride
based cleaning solutions.
Normal usage of Virox 5 RTU according to the manufacturer instruction will not alter the
laminate surface. Dampen a soft cloth with diluted cleaner and wipe the surface to remove dirt
and fingerprints. Wipe the surface with a soft dry cloth to remove any moisture.

CAUTION: DO NOT USE WD-40 or any other lubricant or damage to the table could occur.

9|Page
SERVICE INFORMATION

Single Top

PRIMARY TOP REPLACEMENT

Required Tools: #3 Philips Screwdriver

1. Fully raise the table top.

WARNING: To avoid personal injury or damage to the table, support the table top before
removing the screws securing it to the top support.

2. Remove six #3 Philips screws under the table top holding the top to the support bracket.
3. Lift off the table top.
4. Reverse to install new table top.

Flip Top

TOP REPLACEMENT

Required Tools: #3 Philips Screwdriver; #2 Robertson Screwdriver

1. Fully raise the table top.

WARNING: To avoid personal injury or damage to the table, support the table top before
removing the screws securing it to the top support.

2. Remove two #2 Robertson screws connecting the lid-stay to the secondary flip top
surface.
3. Remove six #2 Philips screws under the table top holding the top to the support bracket.
4. Lift off the table top.
5. Remove six #2 Robertson screws from flip top side of the hinges to fully detach the dual
flip top surface.
6. Reverse to install new table top.

10 | P a g e
Gas Spring
Required Tools: #3 Philips Screwdriver; Slotted (Flat) Screwdriver; 5/8 Socket or Wrench

1. Remove release handle by prying out retaining clip and removing handle support pin.
2. Remove the Nut holding the top end of gas spring to the support bracket.
3. Remove 4 screws from the support bracket and lift off the support bracket.
4. Pry out the retaining clip close to the bottom of the inner column and pull out the gas
spring support pin (This may require moving the gas spring from the top edge)
5. Remove gas spring assembly from the inner column.
6. Reverse to install the new gas spring.

NOTE: When reinstalling, the new gas spring will need to be compressed slightly in order to
fasten the support bracket to the outer column by means of the four screws pertaining to step
3.

Outer Column Replacement

Required Tools: #2 Philips Screwdriver

1. Remove primary top.

2. Slide the column all the way down and remove locking screw on the inner column.
3. Now remove outer column cap by removing four screws.
4. Pull the outer column away from the base.
5. Remove glides from the inside of the column.
6. Reverse to install a new outer column.

Caster Replacement

Required Tools: 13mm wrench

1. Fully raise the table top.

2. While maintaining a secure grip on the table carefully flip it over or turn it on its side to
allow access to the damaged caster.
3. Use the 13mm wrench to remove the damaged casters and replace with new casters.

11 | P a g e