lum5
lum5
Ordering Information:
__ __ _ __ M
_ V
_ _ _
__ ___
Internal Fixture Type Optical
Voltage Code mounting controller Light Bar Finish OPTIONs
code (nominal)
I = Indirect 14 = 1’ x 4’ Stand Alone 0 = 120-277V M = Suspension Kits, V = 0-10V WHTE = White Blank if no options
S = Suspended C4* = 1’ x 4’ Continous (ul version) See Accessories D = Dali* A = Additional branch circuit
S4 = 1’ x 4’ Starter D = 347V table below EL = Emergency Light
* If choosing not to order ES1 = Enlighted Sensor
starter fixture, starter kit *Only available S = Single Pack
must be ordered (see below). for optical code: WP = White Painted (N/A for 347V and Emergency Lights)
A,B,E,F,J and K.
Optical Distribution/ CCT Lumens power
Code configuration
Maximum Run Length: A2 Medium,Medium Efficacy 3500 4000 33
Lumen Code A3 Medium,Medium Efficacy 4000 4200 33
Supply Voltage B2 Medium,Medium Efficacy 3500 4950 42
A or E B or F B3 Medium,Medium Efficacy 4000 5200 42
E2 Medium,7% Uplight 3500 4000 33
120V 192’ 160’ E3 Medium,7% Uplight 4000 4200 33
277V or 347V 400’ 320’ F2 Medium,7% Uplight 3500 4950 42
F3 Medium,7% Uplight 4000 5200 42
Accessories Product code
Suspended Kits - Option 1 93035285
Set of 10’
mounting cables
Upper Mounting
Kit (x2)
Set of 10’ Power feed
mounting cables cable (6.75 FT)
Product Specifications:
Construction:
• Fully recyclable heatsink 1
• IP Rating: IP20
• Impact Resistance: IK=2
All trademarks are the property of their respective owners. Information provided is subject to
change without notice. All values are design or typical values when measured under laboratory
conditions. Current, powered by GE is a business of the General Electric Company.
© 2017 GE.