CERTIFICATE OF COMPLIANCE
Certificate Number MH61445
Report Reference MH61445-20160531
Issue Date 2022-September-30
Issued to: COATS CADENA ANDINA S.A.
Avenida Santander No. 5E – 87
Risaralda
Pereira 66001 COLOMBIA
This certificate confirms that Sewing Threads for use in Protective Garments as
representative samples of described in the below
See following page for additional information.
Have been evaluated by UL in accordance with the
Standard(s) indicated on this Certificate.
Standard(s) for Safety: See Addendum Page
Additional Information: See UL Product iQ® at https://iq.ulprospector.com for
additional information.
This Certificate of Compliance indicates that representative samples of the product described in the certification
report have met the requirements for UL certification. It does not provide authorization to apply the UL Mark. Only
the Authorization Page that references the Follow-Up Services Procedure for ongoing surveillance provides
authorization to apply the UL Mark.
Only those products bearing the UL Mark should be considered as being UL Certified and covered under UL’s
Follow-Up Services.
Look for the UL Certification Mark on the product.
Bruce Mahrenholz, Conformity Assessment Director
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact UL Customer Service at http://ul.com/aboutul/locations/
Page 1 of 2
CERTIFICATE OF COMPLIANCE
Certificate Number MH61445
Report Reference MH61445-20160531
Issue Date 2022-September-30
This is to certify that representative samples of the product as specified on this certificate were tested according
to the current UL requirements.
Sewing threads for use in protective clothing, models
The sewing threads consist of the following composition and sizes.
PRODUCT DESIGNATION FIBER CONTENT SIZES
Firefly 100% Meta-Aramid All Sizes
These sewing threads have been found to meet the thread performance requirements of the following standards:
Standard Title Edition
NFPA 1951 Standard on Protective Ensembles for Technical Rescue Incidents 2020
Standard on Protective Ensembles for Structural Fire Fighting and Proximity Fire
NFPA 1971 2018
Fighting
NFPA 1975 Standard on Emergency Services Work Apparel 2019
Standard on Flame-Resistant Clothing for Protection of Industrial Personnel
NFPA 2112 2023
Against Short-Duration Thermal Exposures form Fire
Standard Performance Specification for Flame Resistant and Arc Rated Protective
ASTM F1506 2020a
Clothing Worn by Workers Exposed to Flames and Electric Arcs
Bruce Mahrenholz, Conformity Assessment Director
UL LLC
Any information and documentation involving UL Mark services are provided on behalf of UL LLC (UL) or any authorized licensee of UL. For questions, please
contact UL Customer Service at http://ul.com/aboutul/locations/
Page 2 of 2
