Scribd
Upload
4 views1 page

P2_PLT Results

The document presents data on a load-settlement test for a plate and footing, detailing dimensions, load readings, stress, and settlement values. It concludes that the observed safe bearing capacity (SBC) exceeds the design SBC and the observed settlement is within permissible limits. Overall, the results indicate that the footing is satisfactory for the applied loads.

Uploaded by

Fazal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4 views1 page

P2_PLT Results

The document presents data on a load-settlement test for a plate and footing, detailing dimensions, load readings, stress, and settlement values. It concludes that the observed safe bearing capacity (SBC) exceeds the design SBC and the observed settlement is within permissible limits. Overall, the results indicate that the footing is satisfactory for the applied loads.

Uploaded by

Fazal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Width of plate 0.

3 m
Length of plate 0.3 m
C/s of Plate 0.09 m2
Width of footing 9.3 m
Load
Dial Gauge Dial Gauge
Gauge Load Gauge Load in Stress in Settlement
2 Reading Reading
Reading reading Kgf t/m in mm
DG1 DG2
(Div.) Load-Settlement Curve
0.0 0.0 0 0.0 0 0 0.0 Stress in t/m2
2.0 2.0 500 5.6 0 7 0.0
0.0 10.0 20.0 30.0 40.0 50.0 60.0 70.0
4.0 4.0 1000 11.1 3 11 0.1 0.0
6.0 6.0 1500 16.7 6 14 0.1
8.0 8.0 2000 22.2 13 18 0.2

Settlement in mm
10.0 10.0 2500 27.8 27 36 0.3
12.0 12.0 3000 33.3 35 44 0.4 1.0
14.0 14.0 3500 38.9 44 55 0.5
16.0 16.0 4000 44.4 59 72 0.7
18.0 18.0 4500 50.0 71 86 0.8
20.0 20.0 5000 55.6 80 96 0.9
2.0
22.0 22.0 5500 61.1 95 115 1.1
24.0 24.0 6000 66.7 108 129 1.2

Ultimate Bearing Capacity N/A


Stl (Graph) 1.2

Total Stress Applied 66.7 t/m2


FOS 2.5
SBC 26.7 t/m2
Design SBC 24.5 t/m2
Settlement 3.29 mm
Permissible Stl 50 mm As per IS 1904

Result
SBC Observed SBC > Design SBC, hence ok
Settlement Observed Settlement < Permissible Settlement, hence ok

You might also like