1

Bill of Material by Ajay S N

BILL OF MATERIAL IN SAP PRODUCTION PLANNING

And information related to all fields.
2
Bill of Material by Ajay S N

What is Bill of Material?

• Bill of material is a one of the PP master data which contains information like list of
components and its quantity required to produce an assembly or FG.
• In SAP different BOM categories are available which are used in different applications or
functional areas in an organization
Bill of Material Application Used
Material BOM Production Planning
Equipment BOM Plant Maintenance
Functional Location BOM Plant Maintenance
Order BOM Sales and Distribution
WBS BOM Project System

Role of Material BOM in PP:

In production planning, Material BOM is used for below function.

1. Material Requirement Planning

2. Product costing
3. Material Consumption.

Usage of BOM in MRP:

• MRP uses Material BOM to calculate required Raw materials or SFG or components
quantity for customer demand of finished materials.
• MRP perform ‘Net requirement Calculation’ at all level of BOM by exploding it to
determine the shortage quantity.

Usage of BOM in Costing:

• During FG Product costing, system rollup its component costing by exploding BOM.
• Product costing comprise of raw material, Activity and overhead costs. Here Raw material Price
is maintained material master and its required quantity for particular FG is maintained in BOM.
• During product costing system multiplies quantity in BOM with Material master price to
determine its cost against the particular FG.

Usage of BOM in Production Consumption:

• When production order is created for an assembly or FG, its BOM components are copied to the
Order.
• At the time of Goods issue against order, system post the consumption based on this BOM
components in an order.
3
Bill of Material by Ajay S N

Material BOM technical types:

There are 3 different types of BOM types are used in PP.

1. Simple BOM
2. Multiple or Alternate BOM. (Technical type ‘M’)
3. Variant BOM (technical type ‘V’)

Simple Bill of Material

Alternate or Multiple BOM

Here end product is same but components are different.

4
Bill of Material by Ajay S N

Variant BOM

• Here end products are different but having common or similar parts like Frame, Saddles etc and variant
part.

What is BOM Explosion?

• BOM explosion means break down of assembly in higher level to Components in lower level.
• System breaks down the assembly by means of its lower-level code. Lower-level code will be assigned
by the system automatically, when an item is linked with the BOM.
• When one material is appearing in several assembly BOM at different levels, system represents lowest
low-level code.

• We can display the lower-level code a material in Material master (MM03) (Additional data or
by clicking )
5
Bill of Material by Ajay S N

E be

How to Create Bill of material:

Bill of Material can be created by accessing below transaction code or menu path.
6
Bill of Material by Ajay S N

Transaction Code Description

CS01 Create Material BOM

• A material master must be existing for all assembly and components before creating BOM.
• Here BOM Usage controls application or business function who can use this Bill of Material.
7
Bill of Material by Ajay S N

• For example, BOM in design phase will have usage ‘2’ which cannot be used for production purpose.

In component overview,

All the components required to produce the assembly (for base quantity)
8
Bill of Material by Ajay S N

BOM Structure:

• BOM has below unique structure which is applicable for all BOM types.

BOM Header

BOM header contains below information:

BOM number

This number is assigned internally by the system. System uses this for linking with transaction data and other PP
applications like MRP, Production order etc.
9
Bill of Material by Ajay S N

Alternate BOM:
This field represents alternate BOM if more than one BOM is exist for the material.

Technical type:
• This field tells which technical types the BOM belongs to be.
• When we create BOM for an assembly, system creates Alternate ‘1’ with technical type ““(Blank).
• When we create BOM second time for same assembly It creates Alternate ‘2’ and changes technical
types as “M”
• Products which have common similar parts, BOM will be created as Variant BOM (Technical types ‘V’)

BOM Base quantity:

• This is quantity for which component quantity will be entered. This base quantity will be used in BOM
explosion at the time of MRP and costing.

Significance of each field in BOM Item:

Item Category:
Each BOM components are assigned with Item category which classify the BOM items.

Stock Item Item can be kept in stock. System generates

reservation at the time order creation
Non-Stock Item Item cannot be kept in stock, may be procured
directly at the time of consumption.
System generates PR or Planned order at the time of
Order creation
Variable Size Item Different sized materials are assigned with this Item
category. Required quantity is calculated based on
Sizes and Formula entered.
PM Structure Item This item category will be used only for Plant
maintenance BOM
Intra Material Temporary material which exists between 2
operations/phases. Commonly used in Process
Industry.
Document Item Document (Design, Drawing, photos etc.) can be
assigned to the BOM as Item using this Item category.
A valid document master record is required for this.
Text Item A text for long text or required for shop floor paper
can be maintained here
Class Item This item category is used for configurable material
to classify the materials.
10
Bill of Material by Ajay S N

Basic Data in BOM Item:

Quantity Data:
Fixed Indicator:
• When component quantity is not based on assembly quantity and always consumed in fixed amount,
this indicator can be used.

Example:

Catalyst used for a chemical process is always fixed without respect to quantity of FG produced.

Component scrap:
• Scrap occurs when component is converted into final assembly is ‘Component Scrap’
• Component scrap can be occurred by means of any one of the following
✓ Losses during storage
✓ Losses during delivery from Vendor
✓ Losses during transport to production
• Component scrap can also be entered in BOM as well as Material master.
• Component scrap maintained in material master is applicable for all BOM products.
• When different component scrap percentage is required for particular product can be maintained in BOM.
• Let Say 1 PC of Assembly A1 requires, 2 PC of Raw material R1 which has 20 % component scrap in Bill of
material. Assume that there is not stock available for A1 and R1.
• When demand of 500 PCs is received for assembly, MRP calculates requirement quantity as follows.

Requirement
Material quantity Component Scrap MRP Planned quantity
PCs % PCs
A1 100 100
R1 200 10% 220

Operation Scrap with Net Indicator:

Here system will only consider the operation scrap percentage entered here and not include assembly scrap (if
anything) entered in material master MRP-1 view.

Let say requirement quantity of R1 and R2 is 100 PCs

Operation scrap in MRP Calculated

Material Assembly scrap BOM Net Indicator quantity
% % PCs
R1 10% 2% 112.2
R2 10% 2% X 102
11
Bill of Material by Ajay S N

General data:

• Co-Product Indicator is activated if more than one finished product is produced in a production process.
• Material which are defined as co-product will be entered with (Negative sign). This means, that
particular material will be considered as “Output Material” along with header material.
• Material entered with Negative sign but no co-product indicator is activated will be consider as “By-
products”.

Recursive Allowed:
• When same material is as header material as well as BOM Item, the BOM is called as Recursive BOM.
• This is the case frequently happens in Process industry as well as Pharmaceutical.
For example, consider below example,

• In foundry process, Liquid metal is produced by melting charge materials like ion, brass etc. are melted
and poured in to mold to form a casting.
• During this melting process unconsumed liquid metal also consumed in every cycle.

Liquid metal (Unconsumed) + Charge Material (Ion, Brass etc.) (High temp)-→ Liquid metal
12
Bill of Material by Ajay S N

• Here input and output materials are same which cause recursive in BOM. It leads BOM will be exploded
indefinitely without stop.
• By setting the indicator recursive allowed at BOM item level BOM explosion will be stopped.

Alternate Item group:

• We can group to gather all alternate items using Alternate Item group.
• Alternate Item group uses 3 keys to determine the alternate material.
o Usage Probability
o Priority
o Strategy
• MRP uses Usage Probability and priority to create dependent requirements.
• Production order also creates reservation based on usage probability.
• But consumption is based on strategy defined in alternate Item group.
This can be explained with following example:

Let say manufacturing car where different brand of tires is used to fit in the car. Depends upon
availability, suitable tyre will be used by the system. Let say Requirement for tyre (based on Car requirement) is
1000 PC and below settings were maintained in BOM items for an Alternate Items Tyre Brand A, Tyre Brand B
and Tyre Brand C.
13
Bill of Material by Ajay S N

There are certain cases where we cannot activate discontinuation logic.

1. We cannot activate discontinuation logic for Alternate Items.

2. Co-products cannot be a discontinuation item
3. Non stock items cannot be discontinuation item.

Sort String:

Based Sort string, system sort the component’s display in report and PP transaction
14
Bill of Material by Ajay S N

Indicators

Production Relevant Indicator:

• This Indicator will be activated by default for BOM usage ‘1’ and ‘3’.
• If this indicator is activated, Item is relevant for Material Planning and production order.
• Item which you want to use only for costing purpose but not for Planning and Production order use like
bulk material, this Indicator can be deactivated.

Engineering/Design Indicator:
• This Indicator will be activated by default for BOM usage ‘2’
• Usage of this BOM in other application like Costing, Production is optional.

Plant Maintenance Indicator:

• Item is relevant for Plant Maintenance and will be set by default for usage ‘4’.

Spare Part Indicator:

• It is generally used in Plant maintenance (equipment BOM) which can be assigned to the equipment
operations.
15
Bill of Material by Ajay S N

Costing relevancy:
• Item relevancy for costing is decided by this Indicator.
• On deselecting this Indicator, Particular BOM Item will be excluded from Costing but not relevant for
Production/Planning.

Material Provision Indicator:

This Indicator controls relevancy of MRP. Generally used for Subcontract materials.

• If Subcontract components are provided by the production plant, no need to activate this Indicator.
• So that MRP generate dependent requirement for the components.
• If components are not provided by production plant and is already available in Vendor location, activate
this indicator. So that MRP will not plan or generate dependent requirement.

Bulk Material:
• Material which are available directly at the machine location like Grease, Washers can be defined as
Bulk material

For bulk materials,

✓ Item will not relevant for Costing

✓ Dependent requirement will not be generated by MRP.
✓ There will not be any Production storage location for this item to issue from Store, as it is directly
available at Machine/Work center location.
✓ Replenishment is based on consumption-based planning.
• If a Material is used as bulk material for all products, we can set it in Material master (MRP2 view).
• If it is used for some products and not for every product means we can set it at BOM item level.

Production Storage Location:

✓ Location from which Raw materials /components are consumed for production.
✓ On release of production order, store person will Issue the material from store to production storage
location.
✓ Production storage location in BOM item has higher priority than location in material master (MRP2
view).
16
Bill of Material by Ajay S N

Supply Area:
• Supply area can be defined in any of the below master data:
1. Work center
2. Bill of Material
3. Material Master
• Selection or determination of Supply area also in the same order.
• Supply area is assigned with Storage location.
• Supply area is used in the following scenarios.
1. KANBAN
2. Warehouse Management

Change Bill of Material

The transaction CS02 is used to the Bill of material.

We can also change the BOM in mass using transaction CS20

This function enables to:

✓ Replace an item in all BOMs

✓ Change item data. Like quantity etc.

Thank you……