Product Data Sheets
®
SAFETRACK MTI
Micro-Trench Infill System
Product Description
SAFETRACK ® MTI is a cold, liquid applied, self–consolidating, flexible roadway reinstatement system based on Stirling
Lloyd's (now part of GCP Applied Technologies) unique Esselac™ resin technology. Its fast cure and overall versatility
make this product ideal for micro-trench reinstatements.
Use
The SAFETRACK ® MTI system has been designed for the infill and final reinstatement of microtrenches in both asphalt
and concrete. The material is used to reinstate the micro-trench and, with an overband, provide a neat termination and
prevent the ingress of water into the fabric of the roadway or other surface.
Surface Preparation
The vertical faces of the trench and adjacent surfaces to be treated must be clean and dry. Use a stiff brush to clean off
trench walls followed by oil free and dry compressed air to clear the trench of all dirt, standing water and loose
material. Dry with a SAFETRACK ® drying lance or with compressed air that is oil free. Pay particular attention to aiming
the air or air/ gas mixture at the cut face on both sides of the trench to ensure proper cleaning of the trench. Repeat
blowing out and cleaning the trench as needed.
Product Advantages
Rapid cure - fast return to service
Cold applied, no hot trades
Free flowing and self-consolidating – no compaction required
Excellent mechanical interlock
Does not deform under traffic load
Supplied in asphalt grey or coloured indicator.
Application Equipment
SAFETRACK ® MTI can be easily applied by hand or by pump. Please contact your GCP representative for details.
Application
Application training is provided by GCP and application should be in accordance with our detailed "Application
Guidelines" which are available to Authorized Contractors or upon request.
Page 1 of 4
Product Data Sheets
Coverage
SAFETRACK ® MTI - yield per pail and standard BPO Catalyst (Hardener Powder or Liquid) with a specific gravity of
1.85 = 13.60 litres : Yields and consumption rates are theoretical and make no provision for waste on site.
SAFETRACK ® RMP 100 Application
Temperature Range1 -5 to 49°C
TEMPERATURE2 /SUBSTRATE TYPICAL WORKING LIFE TYPICAL CURE TIME3
35°C 7 minutes 10 minutes
30°C 10 minutes 20 minutes
25°C 13 minutes 35 minutes
20°C 15 minutes 50 minutes
15°C 12 minutes* 40 minutes*
* Based on the use of extra hardener powder. Please contact your local GCP representative for advice.
1. For temperatures outside this application range please contact your local GCP representative.
2. Based on material and substrate having similar temperatures.
3. SAFETRACK ® MTI can be overlaid with SAFETRACK ® MTI before it is fully cured.
Overcoating
SAFETRACK ® MTI can be overlaid with the second pass of SAFETRACK ® MTI as soon as the initial set of the indicator
layer has taken place. There is no maximum overlaying time as the material chemically bonds to that already in place.
The existing surfaces are required to be clean and dry.
Page 2 of 4
Product Data Sheets
Colour
Asphalt Gray
Neutral
Yellow (for “dig-safe” indicator layer) Custom Ordered
Cleaning
All tools and equipment should be cleaned with acetone after use, before the material is allowed to cure.
Cleaning
All tools and equipment should be cleaned with acetone after use, before the material is allowed to cure.
Packaging & Storage
Resin: 25.0 k/g pail
BPO Hardener Powder: Range of Pack sizes
All components of the SAFETRACK ® MTI system should be stored in cool, dry, protected conditions, out of direct
sunlight and in accordance with the relevant Health & Safety regulations. Storage temperature must not exceed 77°F
(25ºC). Do not store any component near naked flames or foodstuffs.
Stored in unopened containers, under the correct conditions, SAFETRACK ® MTI and the BPO hardener powder have a
shelf life of six months. The BPO liquid hardener has a shelf life of 12 months. If the components are stored at higher
temperatures the shelf life will be reduced. Please contact us for further details / advice.
Health & Safety
Please refer to the Safety Data Sheet (SDS) for each system component and cleaning material prior to use. Also
reference the SDS for further information.
Page 3 of 4
Product Data Sheets
General Information
SAFETRACK ® MTI is part of a wide range of specialist highway maintenance, waterproofing, surfacing and repair
materials manufactured and supplied by GCP Applied Technologies. If you require any further information on this or any
other of our products, please contact us or visit our website gcpat.com.
gcpat.uk | Technical Services, Manchester, UK (+44 (0) 1565 633111)
We hope the information here will be helpful. It is based on data and knowledge considered to be true and accurate, and is offered for consideration, investigation and verification by the user, but we do not warrant the results to be obtained. Please read all statements,
recommendations, and suggestions in conjunction with our conditions of sale, which apply to all goods supplied by us. No statement, recommendation, or suggestion is intended for any use that would infringe any patent, copyright, or other third party right.
GCP APPLIED TECHNOLOGIES and SAFETRACK are trademarks, which may be registered in the United States and/or other countries, of GCP Applied Technologies Inc. This trademark list has been compiled using available published information as of the publication date
and may not accurately reflect current trademark ownership or status.
© Copyright 2018 GCP Applied Technologies Inc. All rights reserved.
GCP Applied Technologies Inc., 62 Whittemore Avenue, Cambridge, MA 02140 USA.
GCP Applied Technologies (UK) Limited, 487-488 Ipswich Road, Slough, Berkshire, SL1 4EP, UK
This document is only current as of the last updated date stated below and is valid only for use in the United Kingdom. It is important that you always refer to the currently available information at the URL below to provide the most current product information at the
time of use. Additional literature such as Contractor Manuals, Technical Bulletins, Detail Drawings and detailing recommendations and other relevant documents are also available on www.gcpat.uk. Information found on other websites must not be relied upon, as they
may not be up-to-date or applicable to the conditions in your location and we do not accept any responsibility for their content. If there are any conflicts or if you need more information, please contact GCP Customer Service.
Last Updated: 2021-07-02
gcpat.uk/solutions/products/safetrack-highway-maintenance-products/safetrack-mti
Page 4 of 4
