AD-170SE

Parts Manual
Phase 7
Microprocessor Models

American Dryer Corporation

88 Currant Road, Fall River MA 02720-4781 USA
Telephone: +1 (269) 923-3000 / Fax: +1 (508) 678-9447
e-mail: [email protected] / www.adclaundry.com

ADC Part No. 450223 - 7

 Retain This Manual In A Safe Place For Future Reference
American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product
is properly maintained, it will provide many years of safe, efficient, and trouble free operation.

ONLY qualified technicians should service this equipment.

OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation manual included
with the dryer.

The following “FOR YOUR SAFETY CAUTION” must be posted near the dryer in a prominent location.

FOR YOUR SAFETY POUR VOTRE SÉCURITÉ

Do not store or use gasoline Ne pas entreposer ni utiliser d’essence
or other flammable vapors ni d’autres vapeurs ou liquides
and liquids in the vicinity of inflammables à proximité de cet appareil
this or any other appliance. ou de tout autre appareil.

We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right
to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to
change or discontinue models.

Important
For your convenience, log the following information:

DATE OF PURCHASE ____________________________________________________ AD-170SE

MODEL NO. ______________

RESELLER’S NAME _________________________________________________________________________________

Serial Number(s) _____________________________________________________________________________________

____________________________________________________________________________________________________

____________________________________________________________________________________________________

Replacement parts can be obtained from your reseller or the ADC factory. When ordering replacement parts from the
factory, you can FAX your order to ADC at +1 (508) 678-9447 or telephone your order directly to the ADC Parts
Department at +1 (269) 923-3000. Please specify the dryer model number and serial number in addition to the
description and part number, so that your order is processed accurately and promptly.

The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite
of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering.

“IMPORTANT NOTE TO PURCHASER”

Information must be obtained from your local gas supplier on the
instructions to be followed if the user smells gas. These
instructions must be posted in a prominent location near the dryer.
 Table of Contents
Control Door Assembly .............................................................................................................................................. 4
Phase 7 Microprocessor Control Panel Assembly ..................................................................................................... 5
Dual Timer Control Panel for Models Mfd. as of October 6, 2011 .............................................................................. 6
Dual Timer “Tap Touch” Controls for Models Mfd. prior to October 6, 2011 ............................................................... 7
Main Door Assembly for Models Mfd. as of September 10, 2005 .............................................................................. 8
Front Panel for Models Mfd. as of September 10, 2005 ............................................................................................ 9
Front Panel / Main Door Assemblies for Models Mfd. prior to September 10, 2005 ................................................ 10
Lint Door Assembly .................................................................................................................................................. 12
Lint Drawer / Lint Drawer Switch Box Assemblies ................................................................................................... 13
Microprocessor Temperature Sensor Bracket Assembly ......................................................................................... 14
Tumbler / Support Assemblies ................................................................................................................................. 15
Tumbler Bearing Mount Assembly ........................................................................................................................... 16
Idler Bearing Mount Assembly ................................................................................................................................. 17
Direct Spark Ignition Burner Assembly ..................................................................................................................... 18
Totally Enclosed, Fan-Cooled Tumbler Motor Mount Assembly ............................................................................... 20
Blower Motor Mount Assembly ................................................................................................................................. 21
Fan Shaft Mount Assembly for Gas Models Only .................................................................................................... 22
Fan Shaft Mount Assembly for Steam Models Only ................................................................................................. 23
Gas / Steam 208V / 240V Dual Timer ...................................................................................................................... 24
Electric Models 208V / 240V Dual Timer .................................................................................................................. 25
Microprocessor Reversing Contactor Mounting Panel Assembly for 208-240V Transformers ................................ 26
Microprocessor Reversing Contactor Mounting Panel Assembly for 380-416V Transformers ................................ 28
Microprocessor Reversing Contactor Mounting Panel Assembly for 460-480V Transformers ................................ 30
Sail Switch Assembly ............................................................................................................................................... 32
Steam Damper Assembly ......................................................................................................................................... 33
Top Console Assembly ............................................................................................................................................. 34
Air Jet Assembly ....................................................................................................................................................... 35
Pneumatic Valve Assembly for Gas Models Only .................................................................................................... 36
Pneumatic Valve Assembly for Steam Models Only ................................................................................................. 37
S.A.F.E. System Solenoid Assembly for Models Mfd. as of September 23, 2004 ................................................... 38
S.A.F.E. Solenoid Assembly for Models Mfd. between December 3, 2003 - September 13, 2004 .......................... 39
S.A.F.E. Solenoid Assembly for Models Mfd. prior to December 3, 2003 ................................................................ 40
S.A.F.E. Temperature Probe Assembly .................................................................................................................... 41
Back Guard Assemblies ........................................................................................................................................... 42
Direct Spark Ignition Burner Assembly Specifications .............................................................................................. 43
Step Down Transformer Application Listing ............................................................................................................. 44
Additional Parts Available ......................................................................................................................................... 45
Control Door Assembly

Illus. No. Part No. Qty. Description

1* 883860 1 Control Door (for gas models Only)

883861 1 Short Control Door (for steam models Only)
2 154011 4 #10-32 Multi-Thread U-Nut
3 150321 4 #10-32 x 1/2” Phillips Head Machine Screw
4 ––––– – Contact ADC

* Specify color when ordering.

4 American Dryer Corporation 450223 - 7

 Phase 7 Microprocessor Control Panel Assembly

Illus. No. Part No. Qty. Description

1 112577 1 Phase 7.2 Non-Coin and Label Keypad

2 850980 1 Phase 7 Computer Door
3 887003 1 Phase 7 Non-Coin Reversing Microprocessor Controller with Fire Suppression
(for models mfd. as of December 3, 2003)
887000 1 Phase 7 Non-Coin Reversing Microprocessor Controller with Fire Suppression
(for models mfd. prior to December 3, 2003)
887024 1 Phase 7 Non-Coin Reversing Microprocessor Controller without Fire Suppression
4 150005 4 #6-32 x 1/4” Phillips Round Head Screw
5 153010 4 #6 Star Washer
6 136016 1 5-Amp Fuse
7 136097 1 500 mA Fuse

450223 - 7 www.adclaundry.com 5
Dual Timer Control Panel
For Models Mfd. as of October 6, 2011

Illus. No. Part No. Qty. Description

1 802837 1 15 Minute Timer with Terminals

2 802838 1 60 Minute Timer with Terminals
3 131406 3 Relay SPDT 24V
4 152013 7 #6-32 Hex Nut
5 828262 1 Dual Timer Panel Clinch
6 150110 4 #8-32 x 1/4” Phillips Machine Screw
7 112558 1 Dual Timer Cover Plate
8 124104 1 Pure Touch Know with Red Pointer
9 124105 1 Pure Touch Know with Blue Pointer
10 100299 1 Green Lighted Push Button with Normal Open
11 123549 1 3-Position Selector Switch

6 American Dryer Corporation 450223 - 7

 Dual Timer “Tap Touch” Controls
For Models Mfd. prior to October 6, 2011

Illus. No. Part No. Qty. Description

1 824298 1 15 Minute Timer – 24 VAC

2 824299 1 60 Minute Timer – 24 VAC
3 824175 1 Red Pilot Light – 24 VAC
4 122301 1 “Tap Touch” Switch
5 131932 3 24 VAC Relay
6 120708 1 3, Terminal Closed Block
7 151000 6 #6-32 Pal Nut
8 824297 1 Dual Timer Panel Complete
(includes illus. nos. 1 through 15)
824068 – Dual Timer Panel Only
9 153010 2 #6 Star Washer
10 152000 3 #6-32 Hex Nut
11 150207 2 #10-24 x 1/2” Phillips Pan Head Machine Screw
12 150110 4 #8-32 x 1/4” Phillips Round Head Machine Screw
13 112563 1 Dual Timer Panel Overlay
14 124104 1 Pure Touch Knob with Red Pointer
15 124105 1 Pure Touch Knob with Blue Pointer

450223 - 7 www.adclaundry.com 7
Main Door Assembly
For Models Mfd. as of September 10, 2005

Illus. No. Part No. Qty. Description

1 801600 1 37-1/4” Round Door

2 102221 1 30” Door Glass
3 835128 1 Large Main Door Hinge
4 150683 6 1/4-20 x 5/8” Black Carriage Bolt
5 884367 1 Large Main Door Handle
6 152014 6 1/4-20 Free Spin Wash Nut
7 185522 2 37-1/4” Main Door Magnet Bracket
8 110006 2 1/2” Black Strapping Tape
9 102357 1 Extruded Steel Door Gasket

8 American Dryer Corporation 450223 - 7

 Front Panel
For Models Mfd. as of September 10, 2005

Illus. No. Part No. Qty. Description

1 801633* 1 Magnet Front Panel

802041* 1 Magnet Front Panel with E-Stop
2 123583 1 One Piece Emergency Stop Switch Assembly
(for models mfd. as of August 5, 2011)
123553** 1 Large Emergency Stop Mushroom Head Switch
(for models mfd. prior to August 5, 2011)
3 112599 1 Emergency Stop Nameplate
(for models mfd. as of August 5, 2011)
123506 1 Emergency Stop Nameplate
(for models mfd. prior to August 5, 2011)
4 123555** 1 Normally Open Contact Block
(for models mfd. prior to August 5, 2011)
5 123554** 1 Normally Closed Contact Block with Base
(for models mfd. prior to August 5, 2011)
6 102004 2 Compact Door Magnet
7 152223 2 #10-32 x 1/2” FH T-20 TORX® Machine Screw

* Specify color when ordering.

** Models mfd. prior to February 20, 2007 will require entire E-Stop assembly kit (P/N 887179).

450223 - 7 www.adclaundry.com 9
Front Panel / Main Door Assemblies
For Models Mfd. prior to September 10, 2005

10 American Dryer Corporation 450223 - 7

 Front Panel / Main Door Assemblies
For Models Mfd. prior to September 10, 2005

Illus. No. Part No. Qty. Description

1 881685 1 White Main Door Hinge

882296 1 Coral Wrinkle Blue Main Door Hinge
2 881740 6 1/4-20 x 5/8” White Carriage Bolt
881739 6 1/4-20 x 5/8” Coral Wrinkle Blue Carriage Bolt
3 151012 1 #10-32 White Acorn Nut
4 881688 1 White Main Door Handle
881737 1 Coral Wrinkle Blue Main Door Handle
5 102221 1 30” Door Glass
(for models mfd. as of November 6, 2003)
102214 1 30” Door Glass
(for models mfd. prior to November 6, 2003)
170730 1 Door Glass Adhesive (10.3 oz. cartridge)
6 881806 6 1/4-20 White Free Spin Wash Nut
882293 6 1/4-20 Coral Wrinkle Blue Free Spin Wash Nut
7 150125 1 Main Door Latch Screw
8 151010 1 #10-32 Acorn Nut
9 881689 1 White Main Door Assembly Complete
(includes illus. nos. 1 through 10)
881761 1 Coral Wrinkle Blue Main Door Assembly Complete
(includes illus. nos. 1 through 10)
881966 1 White Main Door Ring
882305 1 Coral Wrinkle Blue Cold Rolled Steel Large Main Door Ring
10 882411 1 Extruded Steel Door Gasket
11 851083* 1 Front Panel Assembly
851062* 1 Front Panel Assembly with E-Stop
12 170330 1 Friction Door Latch
13 154215 2 5/32” Pop Rivet
14 123553** 1 “Emergency Stop” (E-Stop) Push-Pull Button
(for models mfd. as of February 20, 2007)
15 123506** 1 “Emergency Stop” (E-Stop) Nameplate
(for models mfd. as of February 20, 2007)
16 123555** 1 Normally Open Contact Block
(for models mfd. as of February 20, 2007)
17 123554** 1 Normally Closed Contact Block with Base
(for models mfd. as of February 20, 2007)

* Specify color when ordering.

** Models mfd. prior to February 20, 2007 will require entire E-Stop assembly kit (P/N 887179).

450223 - 7 www.adclaundry.com 11
Lint Door Assembly

Illus. No. Part No. Qty. Description

1* 820945 1 Lint Door Assembly

(includes illus. nos. 1 through 3)
2 117607 6 1/4” x 3/8” Poron Foam
3 117604 9 Noise Suppression Tape (sold by the foot)

* Specify color when ordering.

12 American Dryer Corporation 450223 - 7

 Lint Drawer / Lint Drawer Switch Box Assemblies

Illus. No. Part No. Qty. Description

1* 821046 1 Lint Drawer Assembly

2 820925 1 Lint Screen Assembly Only
3 150002 2 #6-32 x 1” Phillips Round Head Machine Screw
4 122116 1 Lint Drawer Switch Only
5 153012 2 #8 Star Washer
6 152001 2 #8-32 x 3/8” Hex Nut
7 820138 1 Lint Drawer Switch Assembly Complete
(includes illus. nos. 3 through 8)
820137 1 Lint Drawer Switch Mounting Bracket Assembly Only
(includes illus. nos. 3 and 4)
321638 1 Lint Drawer Switch Mounting Bracket Only
8 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
9 122604 2 4-Pin Connector
10 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
11 319076 1 Right-Hand Divider Panel
12 319077 1 Left-Hand Divider Panel
13 150301 14 #8-18 x 7/16” Phillips Pan Head TEK Screw

* Specify color when ordering.

450223 - 7 www.adclaundry.com 13
Microprocessor Temperature Sensor Bracket Assembly

Illus. No. Part No. Qty. Description

1 815931 1 Microprocessor Temperature Sensor Bracket Complete

(includes illus. nos. 1 through 11)
820967 1 Microprocessor Temperature Sensor Bracket Only
2 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
3 153010 2 #6 Star Washer
4 130103 1 225° Large Automatic Reset Thermostat Only
5 152000 2 #6-32 Hex Nut
6 121028 2 1/4” x 0.032 Insulated Terminal
7 122701 4 Socket Terminal Only
122801 1 Pin / Socket Extraction Tool … Not Illustrated
8 122605 1 4-Pin Connector (female)
9 154007 2 1/4” Push-On Fastener
10 815961 1 1/4” Temperature Sensor Probe Assembly
(includes illus. nos. 6 through 10)
11 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw

14 American Dryer Corporation 450223 - 7

 Tumbler / Support Assemblies

Illus. No. Part No. Qty. Description

1 820979* 1 Galvanized Tumbler Only without Felt Collar

821795 1 Galvanized Tumbler and Support Assembly Complete
(includes illus. nos. 1 through 13)
881640 1 Stainless Steel Tumbler and Support Assembly Complete
(includes illus. nos. 1 through 13)
2 150309 64 #10-16 x 1/2” Hex Head TEK Crimptite Screw
3 332140 4 Galvanized Tumbler Rib Only
4 150500 1 5/16-18 x 3/4” Socket Button Head Screw
5 100910 12 1/2-13 x 44” Tie Rod
6 332139 4 Tumbler Reinforcing Plate Only
7 332177 ** Tumbler Shim Only
8 821191 1 Tumbler Support Only
9 152011 12 1/2-13 Hex Nut
10 153026 12 1/2” Lock Washer
11 153011 13 9/16” x 1-3/8” Flat Washer
12 100810 1 3-1/8” Retaining Ring
13 116007 1 Felt Collar Only
14 821002 1 Rotational 1 Magnet Holder Assembly

* Felt collar is not included and must be ordered separately.

** As required.

450223 - 7 www.adclaundry.com 15
Tumbler Bearing Mount Assembly

Illus. No. Part No. Qty. Description

1 100703 1 1/2” x 1/2” x 2” Key

2 101217 1 2-1/2” SFX Bushing with Key
3* 100137 2 AB-91 V-Belt (tumbler to idler)
4 101182 1 25” Tumbler Pulley Only
5 150602 4 5/8-11 x 3” Hex Head Machine Bolt
6 153016 4 5/8” Flat Washer
7 881775 1 2-1/2” Pillow Block Bearing Only
8 153016 4 5/8” Flat Washer
9 153015 4 5/8” Lock Washer
10 152010 4 5/8-11 Hex Nut
11 150600 2 3/8-16 x 1-1/2” Hex Head Machine Bolt
12 152005 2 3/8-16 Hex Nut
13 821175 1 Tumbler Bearing Mount Only
14 880883 1 3-1/8” Pillow Block Bearing Only
15 150604 2 1/2-20 x 3” Tap Bolt
16 152012 2 1/2-20 Hex Nut
17 152005 2 3/8-16 Hex Nut
18 153005 2 3/8” Lock Washer
19 153004 6 3/8” Flat Washer
20 150600 2 3/8-16 x 1-1/2” Hex Head Machine Bolt
820931 1 Tumbler Bearing Box Mount / Hardware
(includes illus. nos. 11, 12, 18, 19, 21, 22)
21 100801 2 5/8” Retaining Ring
22 332153 1 5/8” Hinge Pin
23 100810 1 3-1/8” Retaining Ring
24 153018 2 1/4” Flat Washer
25 153007 2 1/4” Lock Washer
26 150512 2 1/4-20 x 1/2” Hex Head Machine Bolt
27 822735 1 Rotational Sensor Assembly
28 820997 1 Rotational Sensor Mounting Bracket

* Replace in matched sets (both belts).

16 American Dryer Corporation 450223 - 7

 Idler Bearing Mount Assembly

Illus. No. Part No. Qty. Description

1 101152 1 1-3/8” Bushing with Setscrew

2 101143 1 2B3.8 SH Sheave
3* 100137 2 AB-91 V-Belt (tumbler to idler)
4 101184 1 SK 1-3/8” Bushing with Setscrew
5* 100102 2 3V-740 V-Belt (idler to motor)
6 101112 1 19” Idler Pulley
7 100715 1 1/4” x 1/4” x 4-5/8” Key
8 332152 1 Idler Shaft Only
9 880779 2 1-3/8” Pillow Block Bearing
10 153011 4 9/16” ID x 1-3/8” OD Flat Washer
11 150606 4 1/2-13 x 2” Tap Bolt
12 150501 6 5/16-18 x 3/4” Tap Bolt
13 152034 2 3/8-16 x 3-1/2” Hex Head Machine Bolt
14 153004 6 3/8” x 1” Flat Washer
15 152005 6 3/8-16 Hex Nut
16 153005 4 3/8” Lock Washer
17 820932 1 Idler Bearing Mount Assembly Complete
(includes illus. nos. 7 through 11 and 17 through 23)
332151 1 Idler Bearing Mount Only
18 152004 6 5/16-18 Hex Nut
19 153011 4 9/16” ID x 1-3/8” OD Flat Washer
20 153026 4 1/2” Lock Washer
21 152011 4 1/2-13 Hex Nut
22 103005 1 Idler Adjustment Hinge Only
23 153002 6 5/16” Lock Washer

* Replace in matched sets (both belts).

450223 - 7 www.adclaundry.com 17
Direct Spark Ignition Burner Assembly

18 American Dryer Corporation 450223 - 7

 Direct Spark Ignition Burner Assembly

Illus. No. Part No. Qty. Description

1 142929 1 1-1/2” to 1” Reducing Coupling

2 332117 1 Pipe Bracket
3 150309 33 #10-16 x 1/2” Hex Head TEK Crimptite Screw
4 142583 1 1” x 40” Nipple
5 884278 1 High Voltage Cable (for models with spade style connector at module)
128919* 1 High Voltage Ignition Cable with Cap 36” (for modules with spike style connector)
6 142808 1 1” x 3” Nipple
7 142602 1 1” Union
8 152013 2 #6-32 Hex Nut
9 142507 1 1” x 90° Street Elbow
10 884265 1 Direct Spark Ignition Ignitor
11 332487 1 Gas Pipe Bracket Straight Extended
12 140017 1 1” 24 VAC Redundant Gas Valve (natural gas)
882945 1 1” 24 VAC Gas Valve (propane gas)
13 332486 1 Gas Pipe Bracket Bent Extended
14 141240 1 4-Port Manifold Only
15* 140839 4 #2 Burner Orifice (natural gas)
140820 4 #29 Burner Orifice (propane gas)
16 390169 1 Direct Spark Ignition Mount Manifold Rest
17 881492 4 Burner Tube Only
18 332121 1 Burner Tube Support Only
19 –––––– 1 Sail Switch
(refer to Sail Switch Assembly on page 32)
20 332113 1 Burner Box Cover Plate
21 331290 1 Ignitor / Flame-Probe Sight Hole Disc
22 151000 2 #6-32 Pal Nut
23 130201 1 330° Manual Reset Hi-Limit
24 150005 2 #6-32 x 1/4” Phillips Round Head Machine Screw
25 821457 1 Burner Hi-Limit Bracket
26 332256 1 Large Dryer Propane Burner Baffle (propane models Only)
27 883849 1 Direct Spark Ignition Module with High Voltage Wire
28 153562 2 #6-32 x 3/4” Clinch Stud
29 835037** 1 Burner Assembly (natural gas) Complete Less Orifice
821960** 1 Burner Assembly (propane gas) Complete Less Orifice
820904 1 Burner Box Only
880978 1 AD-170SE Propane Conversion Kit

* Consult factory for elevations over 2,000 feet.

** Orifices are not included and must be ordered separately.

450223 - 7 www.adclaundry.com 19
Totally Enclosed, Fan-Cooled Tumbler Motor Mount Assembly

Illus. No. Part No. Qty. Description

1 101121 1 5/8” SK Bushing

2 101114 1 2.65” Pulley (for 60 Hz models Only)
101120 1 3.15” Pulley (for 50 Hz models Only)
3* 100102 2 3V-740 V-Belt (motor to idler)
4 120200 1 3/8” x 90° Connector
5 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
6 153001 4 5/16” Flat Washer
7 100050 1 1 hp 208/230/380/460v 3ø 50/60 Hz
Totally Enclosed, Fan-Cooled Motor (56Z frame)
8 800952 1 Tumbler Motor Mount Only (56Z frame)
820941 1 (50/60 Hz) Totally Enclosed, Fan-Cooled Tumbler
Motor Mount Assembly Complete
(includes illus. nos. 1, 4 through 11, 15, and 16)
NOTE: MOTOR PULLEY MUST BE ORDERED SEPARATELY
9 152004 4 5/16-18 Hex Nut
10 153002 4 5/16” Lock Washer
11 153001 4 5/16” Flat Washer
12 152004 4 5/16-18 Hex Nut
13 153002 4 5/16” Lock Washer
14 153001 4 5/16” Flat Washer
15 150619 1 3/8-16 x 3” Hex Head Machine Bolt
16 152005 2 3/8-16 Hex Nut

* Replace in matched sets (both belts).

IMPORTANT: For voltages higher than 460v, contact the factory for correct part number of motor or motor mount assembly.

20 American Dryer Corporation 450223 - 7

 Blower Motor Mount Assembly

Illus. No. Part No. Qty. Description

1 181149 1 7.5 hp 208-460V 3ø Motor (for 60 Hz models)

100046 1 7.5 hp 208-416V 3ø Motor (for 50 Hz models Only)
2 101148 1 SB x 4.0 Motor Pulley (for 60 Hz models Only)
101147 1 SB x 4.8 Motor Pulley (for 50 Hz models Only)
3 101152 1 SH x 1-3/8” Bushing (for 60 Hz models Only)
101194 1 SDS x 1-3/8” Bushing (for 50 Hz models Only)
4 100706 1 5/16” x 5/16” x 1-3/8” Key
5 152004 4 5/16-18 Hex Nut
6 153002 4 5/16” Lock Washer
7 153001 4 5/16” Flat Washer
8 821091 1 Motor Mount Adjustment Plate Only
9 153001 4 5/16” Flat Washer
10 153002 4 5/16” Lock Washer
11 150501 4 5/16-18 x 3/4” Hex Head Machine Bolt
12 152004 4 5/16-18 Hex Nut
13 150503 2 5/16-18 x 2” Hex Head Machine Bolt
14 332322 1 Motor Mount Adjustment Angle Only
15 153001 2 5/16” Flat Washer
16 153002 2 5/16” Lock Washer
17 150501 2 5/16-18 x 3/4” Hex Head Machine Bolt
18* 100128 2 BX-50 Cogged Belt (motor to fan shaft) for 60 Hz Models Only
100164 2 BX-51 Cogged Belt (motor to fan shaft) for 50 Hz Models Only

* Replace in matched sets (both belts).

450223 - 7 www.adclaundry.com 21
Fan Shaft Mount Assembly
For Gas Models Only

Illus. No. Part No. Qty. Description

1 100612 1 1-1/4” Bore x 15” Diameter x 6” Blower (fan) Wheel

2 821078 1 Fan Shaft Mount Assembly Complete
(includes illus. nos. 1 through 21)
821073 1 Fan Shaft Mount Only
3 117604 4 Noise Suppression Tape (sold by the foot)
4 152006 2 1/2-20 Left-Hand Jam Nut
5 153065 1 1-1/2” Flat Washer
6 332280 1 Fan Shaft Only
7 881061 1 1-3/8” Flange Bearing with Setscrew and Grease Fitting
8 153004 4 3/8” Flat Washer
9 153005 4 3/8” Lock Washer
10 152005 4 3/8-16 Hex Nut
11 100704 1 1/4” x 1/4” x 1-3/4” Key
12 880779 1 1-3/8” Pillow Block Bearing
13 170511 2 1/8-27 N.P.T. ZIRC Grease Fitting Only
14 154321 4 5/16-24 x 3/8” Black Allen Setscrew (knurl cup)
15 153004 2 3/8” Flat Washer
16 153005 2 3/8” Lock Washer
17 150600 2 3/8-16 x 1-1/2” Tap Bolt
18 101177 1 2B x 5.8 Pulley
19* 100128 2 BX-50 Cogged Belt (fan shaft to motor) for 60 Hz Models Only
100164 2 BX-51 Cogged Belt (fan shaft to motor) for 50 Hz Models Only
20 100706 1 5/16” x 5/16” x 1-3/8” Key
21 101194 1 SDS x 1-3/8” Bushing Only

* Replace in matched sets (both belts).

22 American Dryer Corporation 450223 - 7

 Fan Shaft Mount Assembly
For Steam Models Only

Illus. No. Part No. Qty. Description

1 100612 1 1-1/4” Bore x 15” Diameter x 6” Blower (fan) Wheel

2 821077 1 Fan Shaft Mount Assembly Complete
(includes illus. nos. 1 through 21)
821073 1 Fan Shaft Mount Only
3 117604 4 Noise Suppression Tape (sold by the foot)
4 152006 2 1/2-20 Left-Hand Jam Nut
5 153065 1 1-1/2” Flat Washer
6 332280 1 Fan Shaft Only
7 881061 1 1-3/8” Flange Bearing with Setscrew and Grease Fitting
8 153004 4 3/8” Flat Washer
9 153005 4 3/8” Lock Washer
10 152005 4 3/8-16 Hex Nut
11 100704 1 1/4” x 1/4” x 1-3/4” Key
12 880779 1 1-3/8” Pillow Block Bearing
13 170511 2 1/8-27 N.P.T. ZIRC Grease Fitting Only
14 154321 4 5/16-24 x 3/8” Black Allen Setscrew
15 153004 2 3/8” Flat Washer
16 153005 2 3/8” Lock Washer
17 150600 2 3/8-16 x 1-1/2” Tap Bolt
18 101135 1 2B x 5.4 Pulley
19* 100128 2 BX-50 Cogged Belt (fan shaft to motor) for 60 Hz Models Only
100164 2 BX-51 Cogged Belt (fan shaft to motor) for 50 Hz Models Only
20 100706 1 5/16” x 5/16” x 1-3/8” Key
21 101194 1 SDS x 1-3/8” Bushing Only

* Replace in matched sets (both belts).

450223 - 7 www.adclaundry.com 23
Gas / Steam 208V / 240V
Dual Timer

Illus. No. Part No. Qty. Description

1 152002 1 1/4-20 Hex Nut

2 131393 1 3ø Contactor
3 801891 2 1.0-5 Amp Overload Rail adj with Component
4 150539 2 #8 x 1-1/4” Pan Head Phillips AB Zinc Screw
5 120701 1 4-Position Terminal Block
6 132497 1 Reversing Contactor
7 132109 1 208-240V Transformer Assembly
8 137015 1 Arc Suppressor with 3” Insul Leads
9 153021 1 1/4” Exterior/Interior Shakeproof Washer
10 152004 1 5/16-18 Hex Nut
11 153002 1 5/16” Lock Washer
12 136008 2 Fuse Holder
13 136057 2 1/2-Amp 3AG Slo-Blo Fuse
14 332346 1 Relay Panel
15 150301 7 #8-18 x 7/16” Phillips Head TEK Screw
16 120774 2 End Stop for Din 35 Rail
17 121010 2 L70 14-4 Terminal Lug
18 120768 7-3/8” 35 x 15 mm Din Rail

24 American Dryer Corporation 450223 - 7

 Electric Models 208V / 240V
Dual Timer

Illus. No. Part No. Qty. Description

1 801890 1 5.4-27 Overload Rail Adjust with Component

2 131393 1 18A Contactor
3 151001 2 #8-32 Pal Nut
4 150009 2 #6-32 x 1-1/2” Phillips Round Head Machine Screw
5 120701 1 4-Position Terminal Block
6 131383 1 Reversing Contactor with Suppression
7 135499 1 3-Pole 25A Circuit Breaker
8 137015 1 Arc Suppressor with 3” Insulation Leads
9 120768 2” 35 x 15mm Din Rail
10 136114 2 1-Amp Time Delay Class C Fuse
11 121012 1 Ground Lug
12 150302 2 6” x 3/8” TEK Screw
13 136037 1 2-Pole 1-Amp Circuit Breaker
14 815818 1 460-24V Step Down Transformer 300VA
15 150301 4 #8-18 x 7/16” Phillips Head TEK Screw
16 120774 1 End Stop for Din 35 Rail
17 15100 2 #6-32 Pal Nut
18 320817 1 Control Panel
19 152014 2 1/4-20 Free Spin Wash Nut
20 131406 1 Relay SPST 24V Panel
815889 1 Relay Panel Plug Harness … Not Illustrated
815898 1 Misc. Relay Panel Wiring … Not Illustrated
815834 1 Drive and Blower Motor Contactor Wiring … Not Illustrated

450223 - 7 www.adclaundry.com 25
Microprocessor Reversing Contactor Mounting Panel Assembly
For 208-240V Transformers

26 American Dryer Corporation 450223 - 7

 Microprocessor Reversing Contactor Mounting Panel Assembly
For 208-240V Transformers

Illus. No. Part No. Qty. Description

1 152002 1 1/4-20 Hex Nut

2 131393 1 Contactor – 24 VAC
3 151001 2 #8-32 Pal Nut
4 150009 2 #6-32 x 1-1/4” Phillips Round Head Machine Screw
5 120701 1 4-Position Power Distribution Block
6 132497 1 Reversing Contactor – 24 Vac
7 132109 1 208-240V Transformer Assembly
8 137015 1 Arc Suppressor
9 153021 1 1/4” Ext / Int Shake Proof Washer
10 152004 1 5/16-18 Hex Nut
11 153002 1 5/16” Lock Washer
12 136008 2 Fuse Block / Holder
13 136057 2 1/2-Amp (Slo-Blo) Fuse
14 332346 1 Contactor / Relay Mounting Panel Only
15 150301 5 #8-18 x 7/16” Phillips Pan Head TEK Screw
16 151000 2 #6-32 Pal Nut
17 120774 2 End Stop / Bracket
18 150108 2 #8-32 x 1/2” Pan Head Machine Screw
19 121010 1 L-70 Ground Lug
20 120768 7-3/4” Din Mounting Rail (sold by the inch)
21 112075 1 Ground Label
22 112068 1 3-Phase (3ø) Power Input Label
23 801890 1 Overload
825267 1 Contactor Wiring … Not Illustrated
829053 1 Relay Panel Wiring … Not Illustrated

450223 - 7 www.adclaundry.com 27
Microprocessor Reversing Contactor Mounting Panel Assembly
For 380-416V Transformers

28 American Dryer Corporation 450223 - 7

 Microprocessor Reversing Contactor Mounting Panel Assembly
For 380-416V Transformers

Illus. No. Part No. Qty. Description

1 132467 1 9-13-amp Overload

2 131393 1 Contactor – 24 VAC
3 151001 2 #8-32 Pal Nut
4 150009 2 #6-32 x 1-1/2” Phillips Round Head Machine Screw
5 120701 1 4-Position Power Distribution Block
6 132497 1 Reversing Contactor
7 801580 1 Transformer (380-416 volt / 3ø)
8 152004 2 5/16-18 Hex Nut
9 121012 1 Ground Lug
10 153002 2 5/16” Lock Washer
11 136008 1 Fuse Block / Holder
12 136057 1 1/2-amp (Slo-Blo) Fuse
13 332346 1 Contactor / Relay Mounting Panel Only
14 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw
15 151000 2 #6-32 Pal Nut
16 120765 2 End Stop / Bracket
17 150108 2 #8-32 x 1/2” Pan Head Machine Screw
18 150297 1 #10 x 1/2” Hex Washer TEK Screw
19 121010 1 L-70 Ground Lug
20 120768 7-3/4” Din Mounting Rail (sold by the inch)
830180 1 Relay Panel Wiring … Not Illustrated
825267 1 Drive / Blower Motor Contactor Wiring … Not Illustrated
21 137015 1 Arc Suppressor

450223 - 7 www.adclaundry.com 29
Microprocessor Reversing Contactor Mounting Panel Assembly
For 460-480V Transformers

30 American Dryer Corporation 450223 - 7

 Microprocessor Reversing Contactor Mounting Panel Assembly
For 460-480V Transformers

Illus. No. Part No. Qty. Description

1 132467 1 9-13-amp Overload

2 131393 1 Contactor – 24 VAC
3 151001 2 #8-32 Pal Nut
4 150009 2 #6-32 x 1-1/2” Phillips Round Head Machine Screw
5 120701 1 4-Position Terminal Block
6 132497 1 Reversing Contactor
7 830193 1 460-480V Transformer Assembly
8 152004 2 5/16-18 Hex Nut
9 121012 1 Ground Lug
10 153002 2 5/16” Lock Washer
11 135501 1 2-Pole 1-Amp Circuit Breaker
12 137015 1 Arc Suppressor
13 332346 1 Relay Panel
14 150301 4 #8-18 x 7/16” Phillips Pan Head TEK Screw
15 151000 2 #6-32 Pal Nut
16 120765 2 End Stop / Bracket
17 150108 2 #8-32 x 1/2” Pan Head Machine Screw
18 150297 1 #10 x 1/2” Hex Washer TEK Screw
19 121010 1 L-70 Ground Lug
20 120768 7-3/4” Din Mounting Rail (sold by the inch)
830192 1 Relay Panel Wiring … Not Illustrated
825267 1 Drive / Blower Motor Contactor Wiring … Not Illustrated

450223 - 7 www.adclaundry.com 31
Sail Switch Assembly

Illus. No. Part No. Qty. Description

1 105500 1 Sail Switch Actuator Rod

2 319202 1 Sail Switch Damper (flat)
3 154002 1 1/8” Push-On Fastener
4 802800 1 Sail Switch Box with Cover and Bracket Only
802801 1 Sail Switch Box Assembly Complete
(includes illus. nos. 1 through 4 and 6 through 10)
5 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
6 150303 2 #4 x 3/4” Pan Head “A” Machine Screw
7 122200 1 Sail Switch Only
8 802799 1 Sail Switch Box Cover and Bracket Only
9 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite Screw
10 154004 1 Twin Speed Nut

32 American Dryer Corporation 450223 - 7

 Steam Damper Assembly

Illus. No. Part No. Qty. Description

1 165092 1 Steam Coil

(for models mfd. as of January 2, 2015)
165078 1 2 Stage Steam Coil
(for models mfd. between November 24, 2009 and January 2, 2015)
165017 1 Steam Coil Only
(for models mfd. prior to November 24, 2009)
165021 1 Steel Steam Coil (option)
2 153002 6 5/16” Lock Washer
3 152004 6 5/16-18 Hex Nut
4 152005 26 3/8-16 Hex Nut
5 153007 26 1/4” Lock Washer
6 820321 2 Steam Damper Hinge Assembly
7 820994 1 Steam Damper Assembly
(includes illus. nos. 7, 10, and 11)
8 115995 96 Steam Damper Gasket (sold by the inch)
9 102350 2 Steam Damper Foam (68-1/2” length)
10 151007 1 7/16-20 Stainless Steel Acorn Nut
11 100499 1 1-1/2” Bore x 3” Stroke Piston
12 100500 1 Piston Support Bracket
13 100472 1 1/4” x 1/8” Connector
14 143110 1 1/4” Tubing (sold by the foot)
(refer to Top Console Assembly on page 34)
— 851053 1 1-1/2” Steam Solenoid Valve Assembly … Not Illustrated

450223 - 7 www.adclaundry.com 33
Top Console Assembly

Illus. No. Part No. Qty. Description

1* 821085 1 Top Console Assembly Only (for gas models Only)

821086 1 Top Console Assembly Only (for steam models Only)
2 114521 1 Phase 7 Non-Coin Program Location Summary Label
(for microprocessor models Only)
3 –––––– 1 Dryer Data Label (not for resale by ADC)
4 153007 12 1/4” Lock Washer
5 152005 12 1/4-20 Hex Nut
6 883864* 1 32” Wire Channel
7 821105 1 Pneumatic Valve Assembly Only (for gas models Only)
(refer to Pneumatic Valve Assembly on page 36)
821104 1 Pneumatic Valve Assembly Only (for steam models Only)
(refer to Pneumatic Valve Assembly on page 37)
8 121104 1 2” x 4” Junction Box Only
121105 1 Junction Box Cover Only
9 150615 4 1/4-20 x 3/4” Bolt
10 153018 4 1/4” Flat Washer
11 883865* 1 Console Gusset Brace
12 883866* 1 Control Door Hinge Channel
13 150300 4 #10-16 x 1/2” Hex Washer TEK Screw

* Specify color when ordering.

34 American Dryer Corporation 450223 - 7

 Air Jet Assembly

Illus. No. Part No. Qty. Description

1 332700 1 Air Jet Tube Only

2 143287 1 1/4” Compression x 1/8” M.P.T. Male Run Tee
3 143259 2 1/4” Compression x 1/8” F.P.T. Bulkhead Fitting
4 143100 36 1/4” Aluminum Tube (sold by the foot)
5 821081 1 Air Jet Mounting Plate Only
(includes illus. nos. 1 through 9)
332531 1 Air Jet Mounting Plate Only
6 152002 2 1/4-20 Hex Nut
7 153007 2 1/4” Lock Washer
8 143110 6 1/4” Poly-Flo Tubing (sold by the foot)
9 143149 1 1/4” x 1/8” M.P.T. 90° Elbow

450223 - 7 www.adclaundry.com 35
Pneumatic Valve Assembly
For Gas Models Only

Illus. No. Part No. Qty. Description

1 143250 1 1/8” M.P.T. Brass Plug

2 150002 2 #6-32 x 1” Phillips Round Head Machine Screw
3 100498 1 3-Way Micro Valve Only – 24 VAC
821105 1 Pneumatic Valve Assembly Complete for Gas Models Only
(includes illus. nos. 1 through 8)
4 143149 1 1/4” Poly x 1/8” M.P.T. Elbow
5 100472 1 1/4” x 1/8” Connector
6 330987 1 Micro Valve Support Bracket Only
7 153010 2 #6 Star Washer
8 152000 2 #6-32 Hex Nut

36 American Dryer Corporation 450223 - 7

 Pneumatic Valve Assembly
For Steam Models Only

Illus. No. Part No. Qty. Description

1 100496 1 1/8” Needle Valve

2 143238 3 1/8” Close Nipple
3 100498 2 3-Way Micro Valve Only – 24 VAC
821104 1 Pneumatic Valve Assembly Complete for Steam Models Only
(includes illus. nos. 1 through 8)
4 143223 1 1/8” F.P.T. Brass Tee
5 150002 2 #6-32 x 1” Phillips Round Head Machine Screw
6 330987 1 Micro Valve Support Bracket Only
7 153010 2 #6 Star Washer
8 152000 2 #6-32 Hex Nut
9 100520 2 1/8” N.P.T. Silencer (muffler)
10 100472 2 1/4” x 1/8” Connector
11 143250 1 1/8” M.P.T. Brass Plug

450223 - 7 www.adclaundry.com 37
S.A.F.E. System Solenoid Assembly
For Models Mfd. as of September 23, 2004

Illus. No. Part No. Qty. Description

1 143581 1 Sensor Activated Fire Extinguishing System 3 GPM 3/8” N.P.T. Spray Nozzle
2 143303 1 3/8” N.P.T. Brass Lock Nut
3 136987 1 Water Jet Pressure Switch
4 143356 1 3/4 NH Male x 3/8” N.P.T. Female Brass Reducing Bushing
5 143251 1 3/8” M.P.T. Brass Plug
6 182579 1 3/8” M.P.T. x 3/8” M.P.T. Brass Hex Nipple
7 143220 1 3/8” F.P.T. Brass Tee
8 143301 1 3/8” Brass 45° Street Elbow
9 311588 1 Sensor Activated Fire Extinguishing System Sprinkler Head Mounting Plate
10 143208 2 3/8” Comp x 3/8” M.P.T. Brass Connector
11 311587 1 Medium Dryer Sensor Activated Fire Extinguishing System Valve Bracket
12 143108 1 20” Stainless Steel Flex Hose with 3/8” Compression
13 154338 2 M4 x 6mm Phillips Head Slotted Machine Screw
14 150309 2 #10-16 x 1/2” Hex Head TEK Crimptite
15 143182 1 3/4” GHT x 1/8” x 3/8” N.P.T. Brass Tee
16 165119 1 Sensor Activated Fire Extinguishing System Water Inlet Valve
17 143183 1 7/16-20 x 3/8” N.P.T. Brass Adapter 2
18 152001 2 #8-32 3/8” Hex Nut
19 824081 1 R.C. Network Assembly

38 American Dryer Corporation 450223 - 7

 S.A.F.E. Solenoid Assembly
For Models Mfd. between December 3, 2003 - September 13, 2004

Illus. No. Part No. Qty. Description

1 165114 1 Sensor Activated Fire Extinguishing System Solenoid Valve 24 VAC 50/60 Hz
2 143220 2 3/8” F.P.T. Brass Tee
3 143251 1 3/8” M.P.T. Brass Plug
4 143208 2 3/8” Comp x 3/8” M.P.T. Brass Connect
5 143108 1 20’ Long Stainless Steel Flexible Tubing
6 311588 1 Sprinkler Head Mounting Plate
7 143303 1 3/8” N.P.T. Brass Lock Nut
8 143301 1 3/8” Brass 45° Elbow
9 152001 2 #8-32 x OD Hex Nut
10 150430 2 #10 x 1/2” Screw
11 143581 1 3 GPM 3/8” F.P.T. Spray Nozzle
12 143025 1 3/8” N.P.T. Nylon Hose Adaptor
13 824081 1 RC Network Assembly
14 143315 1 Bushing 3/8” x 1/8”
15 136987 1 Pressure Sensor
16 182579 1 3/8” Hex Nipple

450223 - 7 www.adclaundry.com 39
S.A.F.E. Solenoid Assembly
For Models Mfd. prior to December 3, 2003

Illus. No. Part No. Qty. Description

1 165114 1 Sensor Activated Fire Extinguishing System Solenoid Water Valve 24V 50/60 Hz
2 143220 1 3/8” F.P.T. Brass Tee
3 143251 1 3/8” M.P.T. Brass Plug
4 143208 2 3/8” Comp x 3/8” M.P.T. Brass Connector
5 143099 6’ 3/8” OD x 0.035 Wall Copper Tubing (sold by the foot)
6 311588 1 Sprinkler Head Mounting Plate
7 143303 1 3/8” N.P.T. Brass Lock Nut
8 143155 1 3/8” Brass Elbow 90°
9 150430 2 #10 x 1/2” Self-Drilling Screw
10 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
11 143581 1 3 GPM 3/8” F.P.T. Spray Nozzle
12 142888 1 1/2” to 3/8” Bushing for Sensor Activated Fire Extinguishing System Valve
13 824828 1 Arc Suppressor

40 American Dryer Corporation 450223 - 7

 S.A.F.E. Temperature Probe Assembly

Illus. No. Part No. Qty. Description

1 822752 1 Sensor Activated Fire Extinguishing System Temperature Probe Assembly

(includes illus. nos. 1 through 5)
2 154007 2 Push-On Fastener
3 390390 1 Sensor Bracket Only
4 150301 2 #8-18 x 7/16” Phillips Pan Head TEK Screw
5 122647 1 Connector Only
122700 2 Pins

450223 - 7 www.adclaundry.com 41
Back Guard Assemblies

Illus. No. Part No. Qty. Description

1* 883862 1 Bottom Back Guard Only

2 150301 28 #8-18 x 7/16” Phillips Pan Head TEK Screw
3 821096 1 Middle Back Guard Only
4 112014 1 High Voltage Label Only
5 112017 1 “ADC Name, Address, Telephone Number” Label
6 112230 1 “Installation Instructions” Label
7 112519 1 “Routine Maintenance Schedule” Label
8 821095 1 Top Back Guard Only
9 114521 1 “Phase 7 Non-Coin Program Location Summary” Label
10 –––––– 1 Dryer Data Label (not for resale by ADC)
11* 883868 1 Blower Housing Front Access Panel
12* 883869 1 Side Access Panel
13 821092 1 Square Duct to Round Duct Transition Piece Assembly
117505 ** Aluminum Duct Tape … Not Illustrated

* Specify color when ordering.

** As required.

42 American Dryer Corporation 450223 - 7

 Direct Spark Ignition Burner Assembly Specifications

DSI Burner Orifice Specification*

Natural Gas Propane Gas
Qty.
D.M.S. Part No. D.M.S. Part No.
4 #2 140839 #29 140820

* Consult factory for elevations over 2,000 feet.

DSI Burner Assembly Specifications

Btu/hr Rating Natural Gas Part No. Propane Gas Part No.
550,000 835037 821960
NOTES: 1. Burner assemblies do not include burner orifices. They must be ordered.
2. When ordering burner assembly specify the model number and serial number of the dryer.

DSI Propane Kit Specification*

Kit Part No. 880978
* Consult factory for elevations over 2,000 feet.

450223 - 7 www.adclaundry.com 43
Step Down Transformer Application Listing

Step Down Transformer Application Listing

(Reversing Relay Box)
TRANSFORMER
WIRE PART NUMBER
HEAT VOLTAGE
SERVICE MICROPROCESSOR
MODELS
380 3 or 4 132059
GAS 416 3 or 4 132062
AND 440 3 or 4 132056
STEAM 460 / 480 3 or 4 132053
575 3 132050
NOTE: For voltages of 380 or above.

44 American Dryer Corporation 450223 - 7

 Additional Parts Available

Part No. Description

112098 “Check Rotation” Label

114001 “CAUTION – Exhaust Lint Screen” Label

114006 “WARNING – Fire Hazards” Label

120102 3/8” Straight (BX) Connector

120111 1/2” Liquidtite 45° Connector

120400 3/8” Red Jacket (BX) Insulator

120500 3/8” Jiffy Clip (BX retainer clip)

120600 3/8” Greenfield (BX)

120800 1/4” In-Line Connector

120802 Red Butt Connector

120902 #74B Wire Nut

120903 Crimp-On Wire Nut

120904 Red Wire Nut

121499 5-1/2” Harness Tie

121500 8” Harness Tie

122804 15” Manometer (water column test gauge)

404500 Almond Brush-In-Cap Bottle Touch-Up Paint

404502 White Brush-In-Cap Bottle Touch-Up Paint

404506 Beige Brush-In-Cap Bottle Touch-Up Paint

404507 Cornflower Blue Brush-In-Cap Bottle Touch-Up Paint

450223 - 7 www.adclaundry.com 45
ADC Part No. 450223 7 - 10/18/17