BT-PON
Shenzhen Baitong Putian Technology Co., Ltd.
BT-BCM6821
2FE EPON ONU
Product Specification
BT-BCM6821 model ONU is a user terminal device inde-
pendently developed by BTPT in line with such industrial
background.The device has built-in two-layer switching
function and three-layer routing function. With compact
structure and small appearance, it is a kind of FTTH
EPON optical network unit with high performance and low
power consumption, which is very suitable for the applica-
tion requirements of various data services in FTTH
networking scenarios of various operators.
Features:
compliant with IEEE 802.3ah specification and OAM Highlights:
protocol
Integrate OAM and TR-069 remote configuration and Support PPPoE/ Static IP/ DHCP
maintenance Support IPv4, IPv6 and IPv4/IPv6
Compatible with Huawei,ZTE and Fiberhome OLT Support DDSN, ALG, DMZ and UPNP
Layer 3 Home Gateway/CPE features with Hardware Compatible with 95% Third-party OLTs (Including
NAT, support Multiple WAN, Route/Bridge mode, etc Huawei/ZTE/Fiberhome/BT-PON and so on)
Layer 2 Switching, support 802.1Q VLAN, 802.1P Chipest :Broadcom
QOS, Bandwidth Control, etc
Support firewall level Settings, support based on Hardware Specifications
URL/MAC/ IP/ address frame filtering Size: 120*90*35mm
Support multicast IGMP v2 proxy/ snooping, support Optical signal access 1*EPON
MLD proxy/ snooping User interface: 2FE
Qos supports PQ, WRR, and CAR queue scheduling Indicator light: POWER/PON/LOS/INTERNET/
LAN1/LAN2/UPGRADE
Button: Power switch Button, Reset Button,
WLAN Button, WPS Button
Weight: 300g
Shenzhen Baitong Putian Technology Co., Ltd.
BT- BCM6821 ONU Product Specifications
BT-PON
Shenzhen Baitong Putian Technology Co., Ltd.
Hardware Specifications PON Interface
Power adapter input: 100V240V AC Module typeEPON-ONU-PX20+
50Hz60Hz Working wavelengthup 1310nmdown 1490nm
PowerSupply requirement: 12V DC1.5A TX Optical power value0.54dBm
Power consumption:<10w RX Optical power sensitivity-27dBm
Working temperature: -10°C ~ +45°C Transmission distance: 020km
Environment humidity: 5% ~ 95% (Non- Transmission rateUplink 1.244Gbps
condensing) downlink 2.488Gbps
Ethernet Interface Wireless
Interface type: RJ45 Working mode: IEEE 802.11 b/g/n
Interface parameters2*10/100Mbps auto Antenna pattern: External 2T2R External antenna
adaptive Ethernet interfaces Antenna gain: 5dBi
Wireless bandwidth: Support 20MHz/40MHz
Interface rate: Maximum rate 300Mbps
SSID: Up to 4 SSID broadcasts are supported
Product Packing Size
Package included: Packing list:
27
57 42
ONU * 1 PC
Power adaptor *1 PC 52pcs/carton
Manual *1 PC measurement: 57*42*27cm/carton
Box *1 PC GW :16.4kg/carton
Shenzhen Baitong Putian Technology Co., Ltd.
BT- BCM6821 ONU Product Specifications
BT-PON
Shenzhen Baitong Putian Technology Co., Ltd.
Interface :
Compa�ble with OLT Huawei/
ZTE/Fiberhome
PON
PON LAN RESET DC LAN
POWER
RESET
POWER
DC
PC
Splitter Router
IPTV
Shenzhen Baitong Putian Technology Co., Ltd.
BT- BCM6821 ONU Product Specifications
BT-PON
Shenzhen Baitong Putian Technology Co., Ltd.
Company Introduction
Shenzhen Baitong Putian Technology Co., Ltd.has more than 10 years experence in fiber optical equipment
industry since from 2008specializes in the research and development of optical access network technology
especially ONU and OLT. It provides integrated network transmission products such as voice, data, and video
based on IP networks.
Service Support: Company Mission:
Fully understand the needs of customers, and Fight for Access the world
create value for customers with advanced
technology, considerate service, and tailor-made
solutions.
Provides customers with a full range of
after-sales service and technical support, and
strive to create value for customers.
Shenzhen Baitong Putian Technology Co., Ltd.
Websitewww.bt-pon.com
Email: [email protected]
Address:3rd Floor, Building B, Honghua Technology
Innovation Park, Laowei First Industrial Zone, Long-
hua District, Shenzhen, China
Shenzhen Baitong Putian Technology Co., Ltd.
BT- BCM6821 ONU Product Specifications
