0

catalog
Product parameters…………………………………………2
Part list…………………………………………………………3
Inner part……………………………………………………4-5
How to play……………………………………………………6
Game setting………………………………………………7-12
Fault detection and troubleshooting………………………13

1
 Product parameters
Size：D2362mm*W1100mm*H2112mm
Weight： 300kg
Voltage： 220V
Power：950W
light box

Speaker box

42”LCD
Small lightbox

gun

Side lamp
Start
button

Seat back pvc

LEDlight

2
 Part list
Part name quantity remark

manual 1

AC power 1

key 2

screw other

3
 Inner part
1. lightbox PVC

2. Open the door ,you can see the list

Service button

Test button

Coin acceptor Ticket dispenser

ticket box

4
 open the back door ,you can see the list
Motherbo
Power supply Power supply
ard

AMP fuse
board

Leakage protection switch

LCD
plug

fan

Wate
r

Water
sensor

30 degrees

45degrees

标准出厂设置 5
 How to play

Insert coin ,then enter the game screen

Shooting the map to choose the scene

When playing ,shoot all the monster ,be careful ,the will attack you

Beat the boss then win the score and ticket

6
 Game settings
1. Press TEST button to game setting menu, menu options as below:
2. a )“Game Volume”：to set game standby volume, setting range is “0 ~ 1
0 0”，“0”means no game standby volume, this setting can only set standby
volume；
b )“Background Volume”：to set game playing volume. setting range is “0 ~ 1
0 0”，“0”means no game playing volume；
c )“Game Playtime”：game play time can be set for 60~180 seconds；
D )“Credit per playtime”：each playtime’s credits, can be set for 0 ~ 10
coins per playtime。“0”means “free play”；
e )“ticket probability”：ticket probability after shot a monster；
f )“Total Income”：machine total income, cannot be removed or changed；
g )“Ticket Dispense Quantity”：Machine total ticket dispense quantity, it can
be removed；
h )“shrift change income”：machine current income, can be removed；
I )“1P gun adjust”：can adjust and test 1P gun；
j )“2P gun adjust”： can adjust and test 2P gun；
K )“IO Test”：to enter hardware test page；
l )“factory default setting”：if setting anything wrong, you can choose this
option to factory default setting；
m )“Exit without Save”: quit settings and return to game page.
n )“Exit with Save”: save settings and return to game page.
You can press TEST button to move the red arrow up / down / left /right, press SERVICE to
adjust, after setting, you can save and exit.

1. IO Test，enter this page to test potentiometer, light and guns are

working well or not. The below options only have OPEN or CLOSED option.
When you want to test potentiometer, light or guns are working well
or not, press TEST button up / down to choose test option that you

7
 want to test, then press SERVICE button to set OPEN or CLOSED.

a ) gun adjustment：In main menu, you choose 1P or 2P gun adjustment to shrift to gun
adjustment page, as below page.
You can see 13 shooting points in the screen, when 1st shooting points appears, please move gun
to point to the shooting point’s centre very accurately, then press START button to confirm
that you have point it well, then the shooting point will turn into blue colour. Then the 2nd
shooting point appears, and the 3rd shooting point appears….then to 13th shooting point,
you do the same shooting adjustment. By the way, in gun adjustment midway, if you think
you have adjust both guns very well, you can press TEST button to exit gun adjustment page
and stop gun adjustment.

b )Adjustment finished Test：After adjustment, the game system to go to Curser Micro Adjust
Menu, as below photo.
This menu page is to test the guns are adjusted well or not. Move the gun’s curser to any zone
on screen to test（zone A to zone N）. Now the zone you choose turns in green colour, and you
can check the ball shooting point can match the curser’s point or not. If you want to adjust the
shooting point this is time, you can press TEST button to choose up / down / left / right, and
then press SERVICE button to increase or decrease the value. With this adjustment, the shooting
point and curser can be matched more accurately.

8
9
 Game instructions
1. Hardware testing is completed, the game begins to load. Progress bar
shows the loading progress;

2. The game finished loading into the game L O G O screen, and wait for
the player put the coin to start the game

3. P bit option: coin game automatically switches to the following screen

Follow the prompts on the screen, press the Start button to select "1P"
or "2P" enter.

10
4. Level selection: according to the prompt information on the screen,
select any level, shoot box image into the game.

5. Six levels of the game screen are as below:

cemetery desert

11
 street Snow

garden Coming soon

6. Warning screen: the enemy and the props attack will appear red border;

7. Continuation of the coin screen: when the blood is close to the end
of the state, the screen will appear:“"whether to continue the game
credits continued," the reminder text;

12
8. The result of the screen:

Successfully pass through the screen

Failed to pass through the screen

9. Game over screen:

13
10. Props Description

big water flow props: Increase the amount of water, increase the
ability to attack the zombies, as shown below

1P big water flow props Normal water flow

14
11. Eat gold Description: Destroy a large number of zombie siege after the release of
a large number of gold coins

12.boss appears: shooting circle round the player,can be prevented boss

attacks

15
 Fault detection and
troubleshooting
Fault Detection and troubleshooting

A. The host can not start work Check hand power 220V, the fuse is beaker.

1. check whether the host audio output

audio plug is a good contact. Is there a
B. No sound output power amplifier, rheostat is broken.
2. check whether the cable is bad,
whether the horn is broken.
Check whether the start switch is bad,
C. Can not start the game whether the cable is bad. Whether the IO
board is working properly.
Check whether the coin switch is bad,
D. No coin whether the cable is bad. Whether the IO
board is working properly.
1. check whether the normal operation
of the pump, whether the cable is bad.
E. No water out 2. check whether the water level in the
tank water level to meet the
requirements.
Check whether the gun up and down about
F. Gun firing is not accurate. the potential for damage, recalibration
gun
Check whether the cable is loose or the
G. No signal host is working properly.

1. Clean muzzle: muzzle when there is not fluent scale, the available wire muzzle
into the inside, drag back and forth to the gun out of the mouth of the scale.

16
2. Clean the filter: the circle rinsed with water to remove the filter clean, the proposed
replacement of water a month and clean water system

17
18
SUPER WING ANIMATION TECHNOL OGY (GUANGZHOU)CO,.LTD

Http://www.xiongyegame.cn

19