HT-D4500

HT-D4550

5.1CH Blu-ray™
Home Entertainment System
user manual

imagine the possibilities

Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register

HT-D4500_ELS_1223.indd 1 2011-12-23 3:58:03

 Safety Information
Safety Warnings

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

This symbol indicates “dangerous CAUTION : TO PREVENT ELECTRIC This symbol indicates important
voltage” inside the product that presents SHOCK, MATCH WIDE BLADE OF PLUG instructions accompanying the
a risk of electric shock or personal injury. TO WIDE SLOT, FULLY INSERT. product.

WARNING
CLASS 1 LASER PRODUCT
• To reduce the risk of fire or electric shock, do KLASSE 1 LASER PRODUKT
not expose this appliance to rain or moisture. LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LÁSER CLASE 1
CAUTION
CLASS 1 LASER PRODUCT
• Apparatus shall not be exposed to dripping or splashing
and no objects filled with liquids, such as vases, shall be This Compact Disc player is classified as a
placed on the apparatus. CLASS 1 LASER product.
• The Mains plug is used as a disconnect device and shall Use of controls, adjustments or performance of
stay readily operable at any time. procedures other than those specified herein
• This apparatus shall always be connected to an AC outlet may result in hazardous radiation exposure.
with a protective grounding connection.
• To disconnect the apparatus from the mains, the plug CAUTION
must be pulled out from the mains socket, therefore the
• INVISIBLE LASER RADIATION WHEN OPEN AND
mains plug shall be readily operable.
INTERLOCKS DEFEATED, AVOID EXPOSURE TO BEAM.

Wiring the Main Power Supply Plug (UK Only)

IMPORTANT NOTICE
The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated
on the pin face of the plug and if it requires replacing, a fuse approved to BS1362 of the same rating must be used.
Never use the plug with the fuse cover removed. If the cover is detachable and a replacement is required, it must be of
the same colour as the fuse fitted in the plug. Replacement covers are available from your dealer. If the fitted plug is not
suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a
suitable safety approved extension lead or consult your dealer for assistance. However, if there is no alternative to cutting
off the plug, remove the fuse and then safely dispose of the plug. Do not connect the plug to a mains socket as there is
a risk of shock hazard from the bared flexible cord. Never attempt to insert bare wires directly into a mains socket. A
plug and fuse must be used at all times.

IMPORTANT
The wires in the mains lead are coloured in accordance with the following code:– BLUE = NEUTRAL BROWN
= LIVE As these colours may not correspond to the coloured markings identifying the terminals in your plug,
proceed as follows:–The wire coloured BLUE must be connected to the terminal marked with the letter N or
coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the let-
ter L or coloured BROWN or RED.

WARNING : DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL WHICH IS MARKED WITH LETTER E OR
BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

2 English

HT-D4500_ELS_1223.indd 2 2011-12-23 3:58:20

 Precautions
• Ensure that the AC power supply in your house complies with the identification sticker located on the back
of your product.
• Install your product horizontally, on a suitable base (furniture), with enough space around it for ventilation
(7.5~10cm).
• Do not place the product on amplifiers or other equipment which may become hot.
Make sure the ventilation slots are not covered.
• Do not stack anything on top of the product.
• Before moving the product, ensure the Disc Insert Hole is empty.
• To disconnect the product completely from the power supply, remove the mains plug from the wall outlet.
- If you leave the product unused for a long period of time, disconnect the plug from the wall outlet.
• During thunderstorms, disconnect the AC plug from the wall outlet. Voltage peaks due to lightning could
damage the product.
• Do not expose the product to direct sunlight or other heat sources. This could lead to overheating and
malfunction of the product.
• Protect the product from moisture, excess heat, and equipment creating strong magnetic or electric fields
(i.e. speakers.).
• Disconnect the power cable from the AC supply if the product malfunctions.
• Your product is not intended for industrial use. Use of this product is for personal use only.
• Condensation may occur if you store your product or a disc in cold temperatures. If transporting the
product during the winter, wait approximately 2 hours until the product has reached room temperature
before using.
• The batteries used with this product contain chemicals that are harmful to the environment.
Do not dispose of batteries in the general household trash.

English 3
HT-D4500_ELS_1223.indd 3 2011-12-23 3:58:20
 Safety Information
Cautions on Handling and Storing Discs Licence
Small scratches on the disc may reduce sound • Dolby and the double-D symbol are registered trademarks of Dolby
and picture quality or cause skipping. Laboratories.
Be especially careful not to scratch discs when • "ABOUT DIVX VIDEO: DivX® is a digital video format
handling them. created by DivX, Inc. This is an official DivX
Certified® device that plays DivX video. Visit www.divx.com for more
Holding discs information and software tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be
• Do not touch the playback side of the disc. registered in order to play purchased DivX Video-on-Demand (VOD)
• Hold the disc by the edges so that movies. To obtain your registration code, locate the DivX VOD section in
fingerprints will not get on the surface. your device setup menu. Go to vod.divx.com for more information on
how to complete your registration.
• Do not stick paper or tape on the disc.
DivX Certified® to play DivX® video up to HD 1080p, including
premium content.
Disc Storage DivX®, DivX Certified® and associated logos are trademarks of DivX,
Inc. and are used under licence."
• Do not keep in direct sunlight
Covered by one or more of the following U.S. patents : 7,295,673;
• Keep in a cool ventilated area 7,460,668; 7,515,710; 7,519,274
• Keep in a clean Protection jacket. • HDMI, the HDMI Logo, and High-Definition
Store vertically. Multimedia Interface are trademarks or
✎ NOTE registered trademarks of HDMI Licensing
LLC in the United States and other countries.
 Do not allow the discs to become contaminated with • Oracle and Java are registered trademarks of Oracle and/or its
dirt. affiliates. Other names may be trademarks of their respective owners.
 Do not load cracked or scratched discs. • This item incorporates copy protection technology that is protected by
U.S. patents and other intellectual property rights of Rovi Corporation.
Handling and Storing Discs Reverse engineering and disassembly are prohibited.
If you get fingerprints or dirt on the disc, clean it with a • Blu-ray Disc™, Blu-ray™, and the logos are trademarks of Blu-ray
mild detergent diluted in water and wipe with a soft cloth. Disc Association.
• When cleaning, wipe gently from the inside to • iPod is a trademark of Apple Inc.,
the outside of the disc registered in the U.S. and other
countries. iPhone is a trademark of
✎ NOTE Apple Inc.
 Condensation may form if warm air comes into • < Open Source Licence Notice >
contact with cold parts inside the product. When In the case of using open source software, Open Source
condensation forms inside the product, it may not Licenses are available on the product menu.
operate correctly. If this occurs, remove the disc
and let the product stand for 1 or 2 hours with the Copyright
power on.
© 2011 Samsung Electronics Co., Ltd. All rights reserved.

4 English

HT-D4500_ELS_1223.indd 4 2011-12-23 3:58:20

 Contents
SAFETY INFORMATION 2 Safety Warnings
3 Precautions

2
4 Cautions on Handling and Storing Discs
4 Licence
4 Copyright

GETTING STARTED 7 Icons that will be used in manual

8 Disc Types and Characteristics

7
12 Accessories
13 Description
13 Front Panel
14 Rear Panel
15 Remote Control

CONNECTIONS 17 Connecting the Speakers

20 Connecting the Video Out to your TV

17
22 Connecting Audio from External Components
23 Connecting to the Network
24 Connecting the FM Antenna

SETUP 25 Initial Settings

26 Accessing the Settings Menu

25
27 Display
27 TV Aspect

ENGLISH
27 Smart Hub Screen Size
27 BD Wise (Samsung Products only)
27 Resolution
29 HDMI Colour Format
29 Movie Frame (24 Fs)
29 HDMI Deep Colour
29 Still Mode
29 Progressive Mode
30 Audio
30 Speaker Settings
31 User EQ
31 HDMI Audio
31 Audio Return Channel
31 Digital Output
32 Dynamic Range Control
33 Audio Sync
33 Network
33 Network Settings
36 Network Status
36 BD-LIVE Internet Connection
36 System
36 Initial Settings
37 Anynet+ (HDMI-CEC)
37 BD Data Management
37 Time Zone
37 DivX® Video On Demand
37 Reset
38 Language

English 5
HT-D4500_ELS_1223.indd 5 2011-12-23 3:58:20
 Contents
SETUP 38 Security
38 BD Parental Rating

38
38 DVD Parental Rating
38 Change Password
38 General
38 Front Display
38 Network Remote Control
39 Support
39 Software Upgrade
40 Contact Samsung

BASIC FUNCTIONS 41 Playing a Disc

41 Using the Disc menu / Title menu / Popup menu

41
42 Playing the Title List
42 Using the Search and Skip Functions
43 Slow Motion Play/Step Motion Play
43 Repeat Playback
44 Using the TOOLS button
46 Listening to Music
48 Sound Mode
49 Playing back a Picture
50 Playing back a USB Storage Device
51 Listening to Radio
53 Connecting iPod/iPhone Using the USB Cable
53 iPod/iPhone Models You Can Use with This Product

NETWORK SERVICES 54 Using Smart Hub

61 Samsung Apps

54
63 Using vTuner Function
63 BD-LIVE™
63 Using the AllShare Function

OTHER INFORMATION 64 Troubleshooting

67 Specifications

64
• Figures and illustrations in this User Manual are provided for reference only and may differ from actual product
appearance.
• An administration fee may be charged if either
a. an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual)
b. you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual).
• The amount of such administration charge will be advised to you before any work or home visit is carried out.

6 English

HT-D4500_ELS_1223.indd 6 2011-12-23 3:58:20

 Getting Started

01
Getting Started
Icons that will be used in manual

Make sure to check the following terms before reading the user manual.

Term Logo Icon Definition

BD-ROM h This involves a function available on a BD-ROM.

This involves a function available on a BD-RE/-R disc recorded in the

BD-RE/-R z BD-RE format.

DVD-VIDEO Z This involves a function available on a DVD-VIDEO.

DVD-RW(V)

DVD-R
This involves a function available on recorded DVD+RW or DVD-RW(V)/
DVD+RW y DVD-R/+R discs that have been recorded and finalized.

DVD+R

Audio CD o This involves a function available on an audio CD-RW/-R (CD-DA format).

MP3 This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a

WMA
- w USB storage media containing MP3 or WMA contents.
This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a
JPEG - G USB storage media containing JPEG contents.
DivX
This involves a function available in a CD-RW/-R, DVD-RW/-R disc or a
MKV
MP4 DivX x USB storage media containing DivX contents.

USB storage
device
- F This involves a function available on a USB storage device.

This involves a situation where a function does not operate or settings may
CAUTION - ! be cancelled.

✎
This involves tips or instructions on the page that help each function
NOTE -
operate.

Shortcut Key
This function provides direct and easy access pressing the button on
-
the remote control.

• This product is compatible with the PAL colour system only.

• NTSC discs will not play.

English 7
HT-D4500_ELS_1223.indd 7 2011-12-23 3:58:21
 Getting Started
Disc Types and Characteristics Logos of Discs that can be played

Blu-ray Disc Compatibility

Blu-ray is a new and evolving format. Accordingly, disc
compatibility issues are possible. Not all discs are
compatible and not every disc will play back. For Blu-ray Disc Dolby Digital Plus
additional information, refer to the Disc Types and
Characteristics section of this Manual.

✎ NOTE
 Playback may not work for some types of discs, or
when specific operations, such as angle change
and aspect ratio adjustment, are being performed. PAL broadcast system in
Dolby TrueHD
Information about the discs is written in detail on U.K, France, Germany, etc.
the box. Please refer to this if necessary.
 Do not allow the disc to become dirty or scratched.
Fingerprints, dirt, dust, scratches or deposits of
cigarette smoke on the recording surface may
make it impossible to use the disc for playback.
 When a BD-Java title is played, loading may take
longer than a normal title, or some functions may DTS-HD High Resolution
Java
perform slowly. Audio
Discs that cannot be played
• HD DVD Disc
• DVD-RAM
• 3.9 GB DVD-R Disc for Authoring.
• DVD-RW(VR mode) DTS-HD Master Audio |
BD-LIVE
• Super Audio CD(except CD layer) Essential
• DVD-ROM/PD/MV-Disc, etc CVD/CD-ROM/
CDV/CD-G/CD-I/LD
• CDGs play audio only, not graphics.

✎ NOTE
 Some commercial discs and DVD discs purchased
outside your region may not be playable with this
product.
 If a DVD-R/-RW disc has not been recorded properly
in DVD video format, it will not be playable.

8 English

HT-D4500_ELS_1223.indd 8 2011-12-23 3:58:22

 01
Getting Started
Region Code BD-RE/-R

Both the product and the discs are coded by This Blu-ray disc can be recorded and played back.
region. These regional codes must match in This product can play back a BD-RE/-R disc
order to play the disc. If the codes do not match, recorded by other compatible Blu-ray disc
recorders.
the disc will not play.
DVD-VIDEO
Region
Disc Type Area • This product can play back pre-recorded commercial
Code
DVD discs (DVD-VIDEO discs) with movies.
North America, Central America, • When switching from the first layer to the second
South America, Korea, Japan,
A Taiwan, Hong Kong and South layer of a dual-layered DVD-VIDEO disc, there
East Asia. may be momentary distortion in the image and
sound. This is not a malfunction of the product.
Europe, Greenland, French
DVD-RW/-R/+R
Blu-ray B territories, Middle East, Africa,
Australia and New Zealand.
This product can play back a DVD-RW/-R/+R disc
recorded and finalized with a DVD video recorder.
India, China, Russia, Central and Ability to play back may depend on recording
C South Asia. conditions.
DVD+RW
The U.S., U.S. territories and
1 Canada
• This product can play back a DVD+RW disc
recorded with a DVD Video recorder. Ability to
play back may depend on recording conditions.
Europe, Japan, the Middle East,
2 Egypt, South Africa, Greenland
Audio CD (CD-DA)
• This product can play back CD-DA format audio
CD-RW/-R discs.
Taiwan, Korea, the Philippines, • The product may not be able to play some CD-
3 Indonesia, Hong Kong RW/-R discs due to the condition of the
DVD-VIDEO recording.
Mexico, South America, Central CD-RW/-R
4 America, Australia, New Zealand,
Pacific Islands, Caribbean • Use a 700MB(80 minutes) CD-RW/-R disc.
If possible, do not use a 800MB(90 minutes) or
Russia, Eastern Europe, India, above disc, as the disc may not play back.
5 most of Africa, North Korea,
Mongolia
• If the CD-RW/-R disc was not recorded as a
closed session, you may experience delays when
playing back the beginning of the disc or all
recorded files may not play.
6 China
• Some CD-RW/-R discs may not be playable with
this product, depending on the device which was
used to burn them. For contents recorded on CD-
RW/-R media from CDs for your personal use,
Disc Types playability may vary depending on contents and
discs.
BD-ROM
This Blu-ray disc can only be played back.
This product can play back pre-recorded
commercial BD-ROM discs.

English 9
HT-D4500_ELS_1223.indd 9 2011-12-23 3:58:23
 Getting Started
Disc Format
Using JPEG disc
• CD-R/-RW, DVD-RW/-R recorded with UDF or JOLIET format can be played back.
• Only JPEG files with the ".jpg", ".JPG", ".jpeg" or "JPEG" extension can be displayed.
• Progressive JPEG is supported.

DVD-RW/-R (V)
• This is a format that is used for recording data on a DVD-RW or DVD-R disc. The disc can be played by this
product once it has been finalized.
• If a disc that has been recorded in Video Mode by a different maker’s recorder but has not been finalized, it
cannot be played by this product.

Supported File Formats

Video File Support

File Extension Container Video Codec Audio Codec Resolution

DivX 3.11/4.x/5.1/6.0 MP3 1920x1080
H.264 BP/MP/HP AC3 1920x1080
*.avi AVI LPCM
MPEG4 SP/ASP 1920x1080
ADPCM
Motion JPEG DTS Core 1920x1080
DivX 3.11/4.x/5.1/6.0 MP3 1920x1080
H.264 BP/MP/HP AC3 1920x1080
*.mkv MKV LPCM
MPEG4 SP/ASP 1920x1080
ADPCM
Motion JPEG DTS Core 1920x1080
DivX 3.11/4.x/5.1/6.0 MP3 1920x1080
H.264 BP/MP/HP AC3 1920x1080
*.asf ASF LPCM
MPEG4 SP/ASP 1920x1080
ADPCM
Motion JPEG WMA 1920x1080
*.wmv ASF Window Media Video v9 WMA 1920x1080
H.264 BP/MP/HP MP3 1920x1080
*.mp4 MP4 ADPCM
MPEG4 SP/ASP 1920x1080
AAC
H.264 BP/MP/HP ADPCM 1920x1080
*.3gp 3GPP AAC
MPEG4 SP/ASP HE-AAC 1920x1080

10 English

HT-D4500_ELS_1223.indd 10 2011-12-23 3:58:24

 01
Getting Started
File Extension Container Video Codec Audio Codec Resolution
MPEG2 AC3 1920x1080
VRO
*.vro MPEG
VOB MPEG1 352x288
LPCM
MPEG1 AC3 352x288
*.mpg MPEG2 MPEG 1920x1080
PS
*.mpeg LPCM
H.264 AAC 1920x1080

MPEG2 AC3 1920x1080

*.ts H.264 AAC 1920x1080
*.tp TS MP3
*.trp VC1 DD+ 1920x1080
HE-AAC

Restrictions
• Some of the Codecs above listed are not supported if having a problem with the contents.
• Video source with incorrect container information or if corrupt will not be played properly.
• AV source with more than the standard bit rate or frame rate may not be played properly.
• If the index table is corrupt, the Seek (Jump) function will not be supported.
• If you play a video via the network, it may not be played properly depending on the network status.

Video decoder
• Up to H.264 Level 4.1 supported.
• H.264 FMO/ASO/RS, VC1 SP/MP/AP L4, AVCHD not supported.
• MPEG4 SP, ASP :
- Below 1280 x 720: 60 frame max
- Above 1280 x 720: 30 frame max
• GMC 2 or higher not supported.

Audio decoder
• Up to WMA 7,8,9 supported.
• WMA 9 PRO with more than two channels (multi-channel) not supported.
• WMA 9 Lossless, Voice not supported.
• WMA sampling rate at 22050Hz mono not supported.

Music File Support

File Extension Container Audio Codec Support Range

*.mp3 MP3 MP3 -
Compliant with WMA version 10
* Sampling rates (in kHz) - 8, 11, 16, 22, 32,
*.wma WMA WMA 44.1, 48
* Bit rates - All bit-rates in the range 5kbps to
384kbps

English 11
HT-D4500_ELS_1223.indd 11 2011-12-23 3:58:24
 Getting Started
Notes on USB connection 6) Connect directly to the product's USB port.
Connecting through another cable may raise
problems with USB compatibility.
Supported devices:
7) Inserting more than one memory device to a
USB storage media, MP3 player, digital camera, multi-card reader may not operate properly.
USB card reader 8) PTP protocol for digital camera is not
supported.
1) Does not support if a folder or file name is
9) Do not disconnect USB device during a
longer than 125 characters.
"loading" process.
2) A subtitle file bigger than 300 KB may not be
10) Bigger the image resolution, the longer the
properly displayed.
delay to displaying.
3) A certain USB/digital camera device may not
11) DRM applied MP3 files downloaded from a
be compatible with the product.
commercial site are not played back.
4) FAT16 and FAT32 file systems are
supported.
5) Photo (JPEG), music (MP3) and video file
should have their names in Korean or English.
Otherwise, the file may not played.

Accessories

Check for the supplied accessories below.

FUNCTION
POWER TV SOURCE

RECEIVER SLEEP
BD TV
RDS DISPLAY TA

1 2 3
PTY- PTY SEARCH PTY+

4 5 6
7 8 9
FULL SCREEN REPEAT

MUTE

TUNING
VOL
SFE MODE /CH

DISC MENU MENU TITLE MENU

POPUP

TOOLS INFO

RETURN EXIT

TUNER
MEMORY

A B C D
SMART SEARCH S/W LEVEL DSP
HUB
PL MO/ST vTuner

Remote Control/
Video Cable FM Antenna User's Manual
Batteries (AAA size)

12 English

HT-D4500_ELS_1223.indd 12 2011-12-23 3:58:24

 01
Getting Started
Description

Front Panel

9
1 2 3 4 5 6 7 8 9 10 11

1 REMOTE CONTROL SENSOR Detects signals from the remote control.

2 DISC TRAY Opens to accept a disc.

3 DISPLAY Displays the playing status, time, etc.

4 OPEN/CLOSE BUTTON Opens and closes the disc tray.

The mode switches as follows :
5 FUNCTION BUTTON
BD/DVD  D. IN  AUX  R. IPOD  FM
6 STOP BUTTON Stops disc playback.

7 PLAY/PAUSE BUTTON Plays a disc or pauses playback.

8 ENTER BUTTON Selects menu items or starts a Blu-ray disc. (It will not start a DVD disc.)

9 POWER BUTTON ( ) Turns the product on and off.

10 VOLUME CONTROL Volume adjustment.

You can connect a USB memory flash stick here and use it as storage when the product is
11 USB PORT connected to BD-LIVE. You can also use the USB Host for software upgrades and MP3/JPEG/
DivX/MKV/MP4 playback. And also it is possible to use R. IPOD when iPod is connected.

✎ NOTE
 You can perform software upgrades using the USB Host jack with a USB memory flash stick only.
 When the product displays the Blu-ray disc menu, you cannot start the movie by pressing the PLAY button on the
product or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and then press the
ENTER button.

English 13
HT-D4500_ELS_1223.indd 13 2011-12-23 3:58:25
 Getting Started
Rear Panel

1 2 3 4 5 6 7 8 9 10

SPEAKERS OUT COMPONENT OUT FM ANT

CENTER FRONT SURROUND
LAN
DIGITAL
HDMI OUT
AUDIO IN
OPTICAL

SUBWOOFER FRONT SURROUND

SPEAKER IMPEDANCE : 3 WIRELESS LAN AUX IN VIDEO OUT
5V 350mA

The cooling fan supplies cool air to the product to prevent overheating
1 COOLING FAN
and always revolves when the power is on.
5.1 CHANNEL SPEAKER OUTPUT
2 CONNECTORS
Connect the front, centre, surround, subwoofer speakers.

EXTERNAL DIGITAL AUDIO IN JACK

3 (OPTICAL)
Use this to connect external equipment capable of digital output.

Can be used for network based services (see pages 54~63),

4 WIRELESS LAN JACK
BD-LIVE and software upgrade with a wireless LAN adapter.
Can be used for network based services (see pages 54~63),
5 LAN TERMINAL
BD-LIVE and software upgrade under the network connection.
Connect to the 2CH analogue output of an external device
6 AUX IN JACKS
(such as a VCR)

7 COMPONENT VIDEO OUT JACKS Connect a TV with Component video inputs to these jacks.

Connect your TV's Video Input jack (VIDEO IN) to the VIDEO OUT
8 VIDEO OUT JACK
Jack on this product.
Use an HDMI cable, connect this HDMI output terminal to the HDMI
9 HDMI OUT JACK
input terminal on your TV for the best quality picture.

10 FM ANTENNA JACK Connect the FM antenna.

! CAUTION
 Ensure a minimum of 10 cm of clear space on all sides of the cooling fan when installing the product.
 Do not obstruct the cooling fan or ventilation holes.

14 English

HT-D4500_ELS_1223.indd 14 2011-12-23 3:58:26

 01
Getting Started
Remote Control

Tour of the Remote Control

FUNCTION
POWER TV SOURCE
This is mode selection button.
Turn the product on and off. or
Press to select TV's video mode.
If you want to change to TV mode,
Set a Sleep time to shut off the
press the TV button. RECEIVER SLEEP
product.
If you want to change to Home Cinema, BD TV
press the BD button. RDS DISPLAY TA To open and close the disc tray.
1 2 3
PTY- PTY SEARCH PTY+ Use the RDS function to receive
FM stations.
Press numeric buttons to operate options. 4 5 6
7 8 9
FULL SCREEN REPEAT

Press this to see the full screen on a TV. 0 Allows you to repeat a title, chapter,
track or disc.
Press to search backwards or
Press to skip backwards or forwards. forwards.

Press to stop/play a disc. Press to pause a disc.

Cut off the sound temporarily. MUTE

Search for active FM stations and

Adjust the volume.
TUNING change channels.
VOL
SFE MODE /CH
You can set the SFE(Sound Field
Press this to move to the home menu. Effect) mode best suited for the
DISC MENU MENU TITLE MENU
type of music you are listening to.
Press to view the disc menu. POPUP
Use this to enter the popup
menu/title menu.
TOOLS INFO
Press this to use the Tools menu. Use this to display the playback
information when playing
a Blu-ray/DVD disc.
Select on-screen menu items and
change menu value. Press this to exit the menu.
RETURN EXIT
Return to the previous menu.
TUNER
MEMORY
Used to set a preset radio frequency.
A B C D
These buttons are used both for menus
SMART SEARCH S/W LEVEL DSP
on the product and also several
Blu-ray Disc functions. HUB
MO/ST vTuner Regulate and stabilize the volume
Press this to use the Smart Hub. level. (Digital Signal Processor)
This button is not available to use. Press this to use the vTuner.
Press this to search a contents. Used to adjust the level of the
subwoofer.
Select the desired Dolby Pro Select MONO or STEREO for radio
Logic II audio mode. broadcasting.

English 15
HT-D4500_ELS_1223.indd 15 2011-12-23 3:58:26
 Getting Started
Installing batteries in the Remote Control TV Brand Code List
* Battery size: AAA Brand Code Brand Code
Admiral Mitsubishi/
(M.Wards) 56, 57, 58 MGA 18, 40, 59, 60, 75

A Mark 01, 15 MTC 18

01, 02, 03, 04, 05, NEC 18, 19, 20, 40, 59, 60
Anam 06, 07, 08, 09, 10, Nikei 03
11, 12, 13, 14 Onking 03
AOC 01, 18, 40, 48 Onwa 03
Bell & 06, 07, 08, 09, 54,
Howell 57, 58, 81 Panasonic
66, 67, 73, 74
(M.Wards)

✎ NOTE
Penney 18
Brocsonic 59, 60
Philco 03, 15, 17, 18, 48,
Candle 18
 Make sure to match the “+” and “–” ends of Cetronic 03
54, 59, 62, 69, 90
15, 17, 18, 40,
the batteries with the diagram inside the Citizen 03, 18, 25
Philips
48, 54, 62, 72
compartment. Cinema 97 Pioneer 63, 66, 80, 91
 Assuming typical TV usage, the batteries last Classic 03 Portland 15, 18, 59
for about one year. Concerto 18 Proton 40
 The remote control can be used up to Contec 46 Quasar 06, 66, 67
approximately 7 meters in a straight line. Coronado 15 Radio 17, 48, 56, 60,
Shack 61, 75
Craig 03, 05, 61, 82, 83, 84
RCA/ 18, 59, 67, 76, 77,
Croslex 62
78, 92, 93, 94
Setting the Remote Control Crown 03
Proscan
Realistic 03, 19
Curtis
Mates 59, 61, 63 Sampo 40
You can control certain functions of your TV with 00, 15, 16, 17, 40,
CXC 03
this remote control. 02, 03, 04, 15, 16,
Samsung 43, 46, 47, 48, 49,
59, 60, 98
17, 18, 19, 20, 21,
Daewoo 22, 23, 24, 25, 26, Sanyo 19, 61, 65
When operating a TV with the remote control 27, 28, 29, 30, 32, Scott 03, 40, 60, 61
34, 35, 36, 48, 59, 90
Sears 15, 18, 19
Daytron 40
1. Press the TV button to set the remote control Sharp 15, 57, 64
Dynasty 03
to TV mode. 03, 15, 40, 46, 59, 61,
Signature
Emerson 2000 57, 58
64, 82, 83, 84, 85
2. Press the POWER button to turn on the TV. (M.Wards)
Fisher 19, 65
Sony 50, 51, 52, 53, 55
3. While holding down the POWER button, enter Funai 03
Soundesign 03, 40
the code corresponding to your brand of TV. Futuretech 03
Spectricon 01
• If there is more than one code listed for General 06, 40, 56, 59,
SSS 18
Electric (GE) 66, 67, 68
your TV in the table, enter one at a time to Hall Mark 40 18, 40, 48, 54,
Sylvania
determine which code works. 59, 60, 62
Hitachi 15, 18, 50, 59, 69
Symphonic 61, 95, 96
• Example : For a Samsung TV Inkel 45
Tatung 06
While holding down the POWER button, use the JC Penny 56, 59, 67, 86
Techwood 18
number buttons to enter 00, 15, 16, 17 and 40. JVC 70
Teknika 03, 15, 18, 25
KTV 59, 61, 87, 88
4. If the TV turns off, the setting is complete. KEC 03, 15, 40
TMK 18, 40
Toshiba 19, 57, 63, 71
• You can use the TV POWER, VOLUME, KMC 15
Vidtech 18
CHANNEL, and Numeric buttons (0~9). LG 01, 15, 16, 17, 37, 38,
(Goldstar) 39, 40, 41, 42, 43, 44 Videch 59, 60, 69

✎ NOTE Luxman
LXI
18 Wards 15, 17, 18, 40,
48, 54, 60, 64
 The remote control may not work on some (Sears)
19, 54, 56, 59,
60, 62, 63, 65, 71 Yamaha 18
brands of TV's. Also, some operations may not 15, 17, 18, 48, 54,
York 40
Magnavox
be possible, depending on your brand of TV. 59, 60, 62, 72, 89 Yupiteru 03
 The remote control will work with Samsung TVs Marantz 40, 54 Zenith 58, 79

by default. Matsui 54 Zonda 01

MGA 18, 40 Dongyang 03, 54

16 English

HT-D4500_ELS_1223.indd 16 2011-12-23 3:58:27

 Connections

02
Connections
This section involves various methods of connecting the product to other external components.
Before moving or installing the product, be sure to turn off the power and disconnect the power cord.

Connecting the Speakers

Position of the product

SW Place it on a stand or cabinet shelf, or under the TV
stand.
Selecting the Listening Position
The listening position should be located about 2.5 to 3
times the distance of the TV's screen size away from
the TV.
Example : For 32" TV's 2~2.4m
For 55" TV's 3.5~4m

Place these speakers in front of your listening position, facing inwards (about 45°)
toward you. Place the speakers so that their tweeters will be at the same height
Front Speakers ei as your ear. Align the front face of the front speakers with the front face of the
centre speaker or place them slightly in front of the centre speakers.
It is best to install it at the same height as the front speakers. You can also install it
Centre Speaker f directly over or under the TV.
Place these speakers to the side of your listening position. If there isn't enough
room, place these speakers so they face each other. Place them about 60 to
90cm above your ear, facing slightly downward.
Surround Speakershj
* Unlike the front and centre speakers, the surround speakers are used to
handle mainly sound effects and sound will not come from them all the time.

Subwoofer g The position of the subwoofer is not so critical. Place it anywhere you like.

! CAUTION
 Do not let children play with or near the speakers. They could get hurt if a speaker falls.
 When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.
 Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their
hands or alien substances into the duct (hole) of the subwoofer speaker.
 Do not hang the subwoofer on the wall through the duct (hole).
✎ NOTE
 If you place a speaker near your TV set, screen colour may be distorted because of the magnetic field
generated by the speaker. If this occurs, place the speaker away from your TV set.

English 17
HT-D4500_ELS_1223.indd 17 2011-12-23 3:58:28
 Connections
Speaker Components
HT-D4500
(L) (R) (L) (R)

FRONT SURROUND CENTRE SUBWOOFER

Speaker Components Assembled Speakers

HT-D4550 HT-D4550
(L) (R) SCREW (5X15): 4EA

SCREW (4X20): 16EA CENTRE

SPEAKER

FRONT STAND SPEAKER CABLE 

(L) (R)
CENTRE

FRONT SURROUND SUBWOOFER

STAND BASE SPEAKER SPEAKER
SURROUND SUBWOOFER

Installing the Speakers on the Tallboy Stand

HT-D4550 only
1 2
1. Turn the Stand Base upside-down and connect it to
the Stand. Stand
Base
2. Insert small screws (4x20, For connecting Stand & Stand
Stand Base) clockwise into the four holes marked
using a screwdriver as shown in the illustration.
3 4
! CAUTION Speaker

 When you use a torque screwdriver, be careful not to

put excessive force. Otherwise, it runs idle or can be Stand
damaged. (torque screwdriver- below 15 kg.f.cm)
3. Connect the upper Speaker to the assembled Stand.
4. Insert another large screw (5x15, For connecting
5
Speaker & Stand) clockwise into the hole on the rear
of the speaker using a screwdriver.
5. This is the appearance after the speaker is installed.
Follow this steps to install other speaker.

18 English

HT-D4500_ELS_1223.indd 18 2011-12-23 3:58:29

 02
Connections
Connecting The Speakers
HT-D4500
1. Connect the connecting plugs to the back of the product by matching the colours of the speaker
plugs to the speaker jacks.

Front Speaker (L) Surround Speaker (L)

SPEAKERS OUT
CENTER FRONT SURROUND

Centre Speaker Front Speaker (R)

SUBWOOFER FRONT SURROUND

SPEAKER IMPEDANCE : 3

Surround Speaker (R)

Subwoofer SPEAKERS OUT
CENTER FRONT SURROUND

SUBWOOFER FRONT SURROUND

SPEAKER IMPEDANCE : 3

HT-D4550
1. Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire into the
red terminal (+), and then release the tab.
Black Red
3. Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.

Front Speaker (L) Surround Speaker (L)

Front Speaker (R)

SPEAKERS OUT
Centre Speaker CENTER FRONT SURROUND

SUBWOOFER FRONT SURROUND

SPEAKER IMPEDANCE : 3

Subwoofer
SPEAKERS OUT
CENTER FRONT SURROUND

Surround Speaker (R)

SUBWOOFER FRONT SURROUND
SPEAKER IMPEDANCE : 3

English 19
HT-D4500_ELS_0910.indd 19 2013-09-10 ¿ÀÀü 11:09:56
 Connections
Connecting the Video Out to your TV

Choose one of the three methods for connecting to a TV.

METHOD 1 COMPONENT OUT FM ANT

LAN
DIGITAL
HDMI OUT
AUDIO IN
OPTICAL

WIRELESS LAN AUX IN VIDEO OUT

5V 350mA

HDMI OUT

HDMI IN

METHOD 1 : HDMI (BEST QUALITY)

Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to the
HDMI IN jack on your TV.
✎ NOTE
 Certain HDMI output resolutions may not work, depending on your TV.
 After making the video connection, set the Video input source on your TV to match the
corresponding Video output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.
 If you have set the product's remote control to operate your TV, press the TV SOURCE button
on the remote control and select HDMI as the external source of the TV.
HDMI Auto Detection Function
1. Using an HDMI cable, connect the HDMI OUT terminal on the rear of the product to the HDMI IN
terminal of your TV.
2. Turn on the product and TV.
For available HDMI video resolutions, see page 27.
• This function is not available if the HDMI cable does not support CEC.
• HDMI is an interface that enables the digital transmission of video and audio data with just a single
connector. Using HDMI, the product transmits a digital video and audio signal and displays a vivid
picture on a TV having an HDMI input jack.
• HDMI connection description
- HDMI outputs only a pure digital signal to the TV.
- If your TV does not support HDCP, random noise appears on the screen.
• What is the HDCP?
HDCP (High-band width Digital Content Protection) is a system for preventing BD/DVD content outputted
via HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a
display device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized
copies from being made.

20 English

HT-D4500_ELS_1223.indd 20 2011-12-23 3:58:49

 02
Connections
Red Blue Green

METHOD 2
COMPONENT OUT FM ANT

HDMI OUT

Yellow METHOD 3

AN AUX IN VIDEO OUT

mA

METHOD 2: Component Video (BETTER QUALITY)

If your television is equipped with Component Video inputs, connect a Component video cable (not
supplied) from the Component Video Output (PR, PB and Y) Jacks on the back of the product to the
Component Video Input Jacks on your TV.
✎ NOTE
 You can select from a variety of resolution settings such as 1080i, 720p, 576p/480p and 576i/480i,
depending on the disc type. (See page 27)
 The actual resolution may differ from the setting in the Setup menu if both Component and HDMI cables are
connected. The resolution may also be different depending on the disc. (See page 27)
 After making the video connection, set the Video input source on your TV to match the corresponding Video
output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.
 If you have set the product's remote control to operate your TV, press the TV SOURCE button on the remote
control and select COMPONENT as the external source of the TV.
 In DVD playback, if both HDMI and Component jacks are connected and you select the Component 1080p,
1080i, 720p or 576p/480p mode, the Display Setup menu will show the output resolution as 1080p, 1080i,
720p or 576p/480p in the menu. The resolution is actually 576i/480i.
METHOD 3 : Composite Video (GOOD QUALITY)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO
IN jack on your TV.
✎ NOTE
 The VIDEO source is always output in 576i/480i resolution regardless of the resolution set in the Setup
menu. (See page 27)
 After making the video connection, set the Video input source on your TV to match the corresponding
Video output (HDMI, Component or Composite) on your product.
See your TV owner's manual for more information on how to select the TV's Video Input source.
 If you have set the product's remote control to operate your TV, press the TV SOURCE button on
the remote control and select VIDEO as the external source of the TV.
! CAUTION
 Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by
copyright protection systems and the picture will be distorted on the television.

English 21
HT-D4500_ELS_1223.indd 21 2011-12-23 3:58:50
 Connections
Connecting Audio from External Components

T COMPONENT OUT FM ANT

URROUND
LAN
DIGITAL
HDMI OUT
AUDIO IN
OPTICAL

URROUND
E:3 WIRELESS LAN AUX IN VIDEO OUT
5V 350mA

Red White
Optical Cable
(not supplied)
Audio Cable
(not supplied)
If the external analogue
component has only one
Audio Out, connect either
Set-Top Box left or right.
VCR
OPTICAL AUX

OPTICAL : Connecting an External Digital Component

Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1. Connect the Digital Input (OPTICAL) on the product to the Digital Output of the external digital
component.
2. Press the FUNCTION button to select D. IN input.
• The mode switches as follows : BD/DVD  D. IN  AUX  R. IPOD  FM
✎ NOTE
 To see video from your Cable Box/Satellite receiver, you must connect it's video output to a TV.
 This system supports Digital sampling frequencies of 32 kHz of higher from external digital components.
 This system supports only DTS and Dolby Digital audio, MPEG audio which is bitstream cannot be supported.

AUX : Connecting an External Analogue Component

Analogue signal components such as a VCR.
1. Connect AUX IN (Audio) on the product to the Audio Out of the external analogue component.
• Be sure to match connector colours.
2. Press the FUNCTION button to select AUX input.
• The mode switches as follows : BD/DVD  D. IN  AUX  R. IPOD  FM

✎ NOTE
 You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of
the VCR to this product.

22 English

HT-D4500_ELS_1223.indd 22 2011-12-23 3:58:51

 02
Connections
Connecting to the Network

This product enables you to view network based services (See pages 54~63) such as Smart Hub and
BD-LIVE, as well as receive software upgrades when a network connection is made. We recommend
using an Wireless router or IP router for the connection.
For more information on router connection, refer to the user manual of the router or contact the router
manufacturer for technical assistance.

Cable Network
1. Using the Direct LAN Cable (UTP cable), connect the LAN terminal of the product to the LAN
terminal of your modem.
2. Set the network options. (See page 33)

COMPONENT OUT FM ANT

LAN

HDMI OUT

WIRELESS LAN AUX IN VIDEO OUT

5V 350mA

Router

Broadband modem
(with integrated router) Or Broadband modem

Broadband Broadband
service service

Networking with PC for

AllShare function
(See page 63)

✎ NOTE
 Internet access to Samsung’s software update server may not be allowed, depending on the router
you use or the ISP’s policy. For more information, contact your ISP (Internet Service Provider).
 For DSL users, please use a router to make a network connection.
 For the AllShare function, a PC must be connected in the network as shown in the figure.

English 23
HT-D4500_ELS_1223.indd 23 2011-12-23 3:58:52
 Connections
Wireless Network
You can connect to the network with a Wireless IP sharer.
1. A wireless AP/IP router is required to make a wireless network connection. Connect the wireless
LAN adapter to the Wireless LAN Adapter on the rear panel of the product.
2. Set the network options. (See page 33)

Broadband COMPONENT OUT

service LAN

WIRELESS LAN AUX IN VIDEO OUT

Wireless IP sharer 5V 350mA

PC
Wireless LAN Adapter
(not supplied)
Networking with PC for
AllShare function
(See page 63)

✎ NOTE
 This product is compatible with only Samsung's Wireless LAN Adapter. (not supplied) (Model name:
WIS09ABGN).
- The Samsung Wireless LAN Adapter is sold separately. Contact a Samsung Electronics retailer for
purchasing.
 You must use a wireless IP sharer that supports IEEE 802.11 a/b/g/n. (n is recommended for stable
operation of the wireless network.)
 Wireless LAN, by its nature, may cause interference, depending on the use condition (AP performance,
distance, obstacles, interference by other radio devices, etc).
 Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
 When applying the security key for the AP (wireless IP sharer), only the following is supported.
1) Authentication Mode : WEP, WPAPSK, WPA2PSK
2) Encryption Type : WEP, AES
 For the AllShare function, a PC must be connected in the network as shown in the figure.

Connecting the FM Antenna

FM Antenna (supplied) 1. Connect the FM antenna supplied to the FM ANTENNA

Jack.
2. Slowly move the antenna wire around until you find a
location where reception is good, then fasten it to a wall
FM ANT
or other rigid surface.
HDMI OUT
✎ NOTE
 This product does not receive AM broadcasts.

24 English

HT-D4500_ELS_1223.indd 24 2011-12-23 3:58:54

 Setup

03
Setup
Initial Settings • Home Menu

1. Turn on your TV after connecting the product. My Contents

When you connect and turn on the product to a
Videos
TV for the first time, the Initial Settings screen
Photos
appears.
Music

Function My Devices Internet Settings

Initial Settings | On-Screen Language

Select a language for the on-screen displays.

Български Hrvatski Čeština
Dansk Nederlands English d WPS(PBC)
Eesti Suomi Français
Deutsch
Indonesia
Ελληνικά
Italiano
Magyar
✎ NOTE
m Move " Enter
 The Home menu will not appear if you do not
configure the initial settings except as noted
below.
2. Press the ▲▼◄► buttons to select the desired  If you press the BLUE (D) button during the
language, and then press the ENTER button.
Network setup, you can access the Home
3. Press the ENTER button to select Start. menu even if the network setup is not
completed yet.
4. Press the ▲▼ buttons to select the desired TV
Aspect Ratio, and then press the ENTER button.  If you want to display the Initial Setting screen
(See page 27) again to make changes, select the Initial
Settings. (See page 36)
5. Press the ▲▼ buttons to select the desired
Network Settings : Wired, Wireless
 If you use an HDMI cable to connect the
product to an Anynet+(HDMI-CEC)-
(General), WPS(PBC) or One Foot
compliant Samsung TV and 1.) You have set
Connection, and then press the ENTER
the Anynet+(HDMI-CEC) feature to On in
button. If you do not know the details of your
both the TV and the product and 2.) You have
Network Settings, press the BLUE (D) button
set the TV to a language supported by the
on your remote instead to skip Network
product, the product will select that language
Settings here, finish the Initial Settings, and
as the preferred language automatically.
go to the Home menu.
If you selected a Network Settings, go to  If you leave the product in the stop mode for
pages 33~36 for more information about the more than 5 minutes without using it, a screen
Network settings. When done, go to Step 6. saver will appear on your TV. If the product is
left in the screen saver mode for more than 20
6. The Home menu appears. (For more minutes, the power will automatically turn off.
information about the Home menu, please
see page 26.)

English 25
HT-D4500_ELS_1223.indd 25 2011-12-23 3:58:56
 Setup
Accessing the Settings Menu 2. Press the ◄► buttons to select Settings,
and then press the ENTER button.
DISC MENU MENU TITLE MENU 3. Press the ▲▼ buttons to select the desired
POPUP submenu, and then press the ENTER
1 button.
TOOLS INFO
4. Press the ▲▼ buttons to select the desired
item, and then press the ENTER button.
3
5. Press the EXIT button to exit the menu.
2 4
✎ NOTE
RETURN EXIT

TUNER
 When the product is connected to a network,
select Internet from the Home menu.
1 MENU Button : Press to move to the Home menu.
Download the desired content from Samsung
2 RETURN Button : Return to the previous menu. Apps. (See pages 61~63)
ENTER / DIRECTION Button :  The access steps may differ depending on the
Move the cursor or select an item. menu you selected.
3
Activate the currently selected item.  The OSD (On Screen Display) may change in
Confirm a setting. this product after you upgrade the software
4 EXIT Button : Press to exit the current menu. version.

To access the Settings menu and sub-menus,

follow these steps:

1. Press the POWER button.

The Home Menu appears.
• Home Menu

My Contents
Videos

3
Photos

Music

1 4
Function My Devices Internet Settings

2 5
d WPS(PBC) 6

1 Selects My Devices.
2 Selects Function.
3 Selects My Contents.
4 Selects Internet.
5 Selects Settings.
6 Displays the buttons available.

26 English

HT-D4500_ELS_1223.indd 26 2011-12-23 3:58:59

 03
Setup
Display BD Wise (Samsung Products only)
You can configure various display options such as BD Wise is Samsung’s latest inter-connectivity
the TV Aspect Ratio, Resolution, etc. feature.
When you connect a Samsung product and a
TV Aspect Samsung TV with BD Wise to each other via HDMI,
Depending on the type of television you have, you
and BD Wise is on in both the product and TV, the
may want to adjust the screen size setting. product outputs video at the video resolution and
frame rate of the BD/DVD disc.
• 16:9 Original : Select when you connect the • Off : The output resolution stays fixed at the
product to a 16:9 TV screen. The product will resolution you set previously in the Resolution
display all content in its original aspect ratio. menu, regardless of the resolution of the disc.
Content formatted in 4:3 will be displayed with See Resolution below.
black bars on the left and right. • On : The product outputs video at the original
• 16:9 Full : Select when you connect the product resolution and frame rate of the BD/DVD disc.

✎ NOTE
to a 16:9 TV screen. All content will fill the full
screen. Content formatted in 4:3 will be stretched.
• 4:3 Letter Box : Select when you connect the
 When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD
product to a 4:3 TV screen. The product will Wise appears in the Resolution menu.
display all content in its original aspect ratio.  If the product is connected to a device that
Content formatted in 16:9 will be displayed with does not support BD Wise, you can not use
black bars on the top and bottom. the BD Wise function.
• 4:3 Pan-Scan : Select when you connect the  For proper operation of BD Wise, set the BD
product to a 4:3 TV screen. 16:9 content will have Wise menu of both the product and the TV to On.
the extreme left and right portions cut off.
Resolution
✎ NOTE Lets you set the output resolution of the
 Depending on the disc type, some aspect ratios Component and HDMI video signal to Auto,
may not be available.
1080p, 1080i, 720p, 576p/480p, or 576i/480i.
 If you select an aspect ratio and option which is The number indicates the number of lines of
different than the aspect ratio of your TV screen,
then the picture might appear to be distorted. video per frame. The i and p indicate interlaced
and progressive scan, respectively. The more
 If you select the 16:9 Original, your TV may
lines, the higher the quality.
display 4:3 Pillarbox (black bars on sides of
• Auto : Automatically sets the output resolution
picture).
to the connected TV’s maximum resolution.
• BD Wise : Automatically sets the resolution to
Smart Hub Screen Size the resolution of the BD/DVD disc if you have
Set the Smart Hub Screen to the optimal size. connected the product via HDMI to a TV with
the BD Wise feature. (The BD Wise menu item
• Size 1 : Smart Hub screen size will be smaller appears only if BD Wise is set to On. See BD
than default. You may see some black on sides of Wise above.)
screen. • 1080p : Outputs 1080 lines of progressive
• Size 2 : This is the default setting for Smart Hub. video. (HDMI only)
The product displays the normal Smart Hub • 1080i : Outputs 1080 lines of interlaced video.
screen size. • 720p : Outputs 720 lines of progressive video.
• Size 3 : This will display a larger Smart Hub • 576p/480p : Outputs 576/480 lines of
screen size. The image may be too large for your progressive video.
TV screen. • 576i/480i : Outputs 576/480 lines of interlaced
video. (VIDEO only)

English 27
HT-D4500_ELS_1223.indd 27 2011-12-23 3:59:01
 Setup
Resolution according to the output mode

• Blu-ray Disc/E-contents/Digital Contents playback

HDMI / connected HDMI / not connected

HDMI Mode Component Mode
Output
Setup E-contents/ Component/ E-contents/ VIDEO Mode
Blu-ray Disc Digital VIDEO Mode Blu-ray Disc Digital
contents contents
Resolution of
BD Wise 1080p@60F 576i/480i - - -
Blu-ray Disc
Max. Max.
Auto Resolution of Resolution of 576i/480i - - -
TV input TV input
1080p@60F 1080p@60F 1080p@60F 576i/480i - - -
Movie Frame :
1080p@24F 1080p@24F 576i/480i - - -
Auto (24Fs)
1080i 1080i 1080i 576i/480i 576i/480i 1080i 576i/480i
720p 720p 720p 576i/480i 576i/480i 720p 576i/480i
576p/480p 576p/480p 576p/480p 576i/480i 576i/480i 576p/480p 576i/480i
576i/480i - - - 576i/480i 576i/480i 576i/480i

• DVD playback

HDMI / connected HDMI / not connected

Output
Setup Component/VIDEO
HDMI Mode Component Mode VIDEO Mode
Mode
BD Wise 576i/480i 576i/480i - -
Max. Resolution of
Auto 576i/480i - -
TV input
1080p@60F 1080p@60F 576i/480i - -
1080i 1080i 576i/480i 576p/480p 576i/480i
720p 720p 576i/480i 576p/480p 576i/480i
576p/480p 576p/480p 576i/480i 576p/480p 576i/480i
576i/480i - - 576i/480i 576i/480i

28 English

HT-D4500_ELS_1223.indd 28 2011-12-23 3:59:01

 03
✎ NOTE

Setup
Movie Frame (24 Fs)
 If the TV you connected to the product does Setting the Movie Frame (24Fs) feature to Auto
not support Movie Frame or the resolution you allows you to adjust the product’s HDMI output to
selected, the message “If no pictures are 24 frames per second for improved picture quality.
shown after the selection, please wait for 15 You can enjoy the Movie Frame (24Fs) feature only
seconds. And then, the resolution will be on a TV supporting this frame rate. You can select
reverted to the previous value automatically. Movie Frame only when the product is in the HDMI
Would you like to make a selection?” appears. 1080i or 1080p output resolution modes.
If you select Yes, the TV’s screen will go blank • Auto : Movie Frame (24Fs) functions work.
for 15 seconds, and then the resolution will
• Off : Movie Frame (24Fs) functions are off.
revert to the previous resolution automatically.
 If the screen stays blank after you have HDMI Deep Colour
changed the resolution, remove all discs, and
then press and hold the STOP () button on Lets you output video from the HDMI OUT jack
the front of the product for more than 5 with Deep Colour. Deep Colour provides more
seconds. All settings are restored to the accurate colour reproduction with greater colour
factory default. Follow the steps on the depth.
previous page to access each mode and • Auto: The product outputs video with Deep
select the Display Setup that your TV will Colour to a connected TV which supports
support. HDMI Deep Colour.
 When the factory default settings are restored, • Off : The picture is output without Deep
all stored user BD data is deleted. Colour.
 The Blu-ray Disc must have the 24 frame
feature for the product to use the Movie Frame Still Mode
(24Fs) mode.
Lets you set the type of picture the product
 If both HDMI and Component jacks are displays when you pause DVD playback.
connected and you are currently viewing
Component output, the resolution is fixed to • Auto: Automatically shows the best still picture
576i/480i. depending on the content.
• Frame : Select when pausing a scene with a
little action.
HDMI Colour Format
• Field : Select when pausing a scene with a lot
Lets you set the colour space format for HDMI of action.
output to match the capabilities of the connected
device (TV, monitor, etc). Progressive Mode
• Auto : Automatically sets the product to the
Lets you improve picture quality when viewing DVDs.
optimum format supported by your device.
• YCbCr (4:4:4) : If your TV supports the YCbCr • Auto : Select to have the product automatically
colour space via HDMI, select this to output the select the best picture quality for the DVD
normal YCbCr colour gamut. you’re watching.
• RGB (Standard) : Select this to output the • Video : Select for the best picture quality from
normal RGB colour gamut. concert or TV show DVDs.
• RGB (Enhanced) : If you have connected the
product to a DVI display device such as a
monitor, select this to output the enhanced
RGB colour gamut.

English 29
HT-D4500_ELS_1223.indd 29 2011-12-23 3:59:01
 Setup
Audio Distance
If the speakers cannot be placed at equal
Speaker Settings distances from the listening position, you can
adjust the delay time of the audio signals from the
front, centre, surround and subwoofer speakers.
Settings
Display Speaker Settings • You can set the Speaker Distance between
Audio Level | 1ft(0.3m) and 30ft(9.0m).
Network
Distance
System
Test Tone : Off
Language Settings
Security Display Distance
General Audio Front L ◄ 10(ft) 3.0(m) |
Support Network Front R : 10(ft) 3.0(m)
> Move " Enter ' Return
System Center : 10(ft) 3.0(m)
Surround L : 10(ft) 3.0(m)
Language
Surround R : 10(ft) 3.0(m)
Security Subwoofer : 10(ft) 3.0(m)
General Test Tone : Off

Level Support
> Move < Change ' Return

You can adjust the balance and level for each

speaker.
Test Tone
Adjusting Front/Centre/Surround/Subwoofer
Speaker Level Use the Test Tone feature to check the speaker
• The volume level can be adjusted in steps from connections.
-6dB to +6dB. Press the ◄, ► buttons to select ON.
• The sound gets louder as you move closer to • A test tone will be sent to Front L  Center 
+6dB and quieter as you get closer to -6dB. Front R  Surround R  Surround L 
Subwoofer in order so you can make sure the
Settings speakers are set up correctly.
Display Level

Audio 0 dB |
Network
Front L
Front R
◄
: 0 dB To stop the test tone, press the ◄, ► buttons to
System Center
Surround L
:
:
0 dB
0 dB
select Off.
Language
Surround R : 0 dB
Security Subwoofer : 0 dB
General Test Tone : Off Settings
Support Speaker Settings
> Move < Change ' Return Display
Audio Level
Network
Distance
System
Test Tone ◄ On |
Language
Security
General
Support
> Move " Enter ' Return

✎ NOTE
 When HDMI Audio is ON (audio is produced
through TV speakers), the Test Tone
function is not available.

30 English

HT-D4500_ELS_1223.indd 30 2011-12-23 3:59:02

 03
Setup
User EQ Digital Output
You can configure the equalizer settings manually You set the Digital Output to match the
to your preference. capabilities of the AV receiver you’ve connected
to the product :
Settings • PCM : Choose if you have connected an HDMI
Display User EQ supported AV receiver.
0 0 0 0 0 0 0
Audio 6
·
• Bitstream (Unprocessed) : Select if you have
Network ·

System
·
· connected an HDMI supported AV receiver
·
Language
0
·
·
with Dolby TrueHD and DTS-HD Master Audio
Security
·
·
·
decoding capabilities.
-6
General
250Hz 600Hz 1kHz 3kHz 6kHz 10kHz 15kHz • Bitstream (Re-encoded DTS) : Choose if you
Support
A Reset > Adjust < Move ' Return have connected an AV receiver using a Digital
Optical input that can decode DTS.
• Bitstream (Re-encoded Dolby D) : Select if
you don’t have an HDMI supported AV
HDMI Audio receiver, but have an AV receiver with Dolby
Digital decoding capabilities.
The audio signals transmitted over the HDMI
Cable can be toggled On/Off. For more details, please refer to the digital output
selection table. (See page 32)
• Off : Video is transmitted over the HDMI
connection cable only, and audio is output Blu-ray Discs may include three audio streams :
through your product speakers only. - Main Feature Audio : The audio soundtrack of
• On : Both video and audio signals are transmitted the main feature.
over the HDMI connection cable, and audio is - BONUSVIEW audio : An additional
output through your TV speakers only. soundtrack such as the director or actor’s
commentary.
✎ NOTE - Navigation Sound Effects : When you choose
 HDMI Audio is automatically down-mixed to some menu navigation, Navigation Sound
2ch for TV speakers. Effects may sound. Navigation Sound Effects
are different on each Blu-ray Disc.
Audio Return Channel
You can enjoy TV sound from the Home Cinema
✎ NOTE
speakers by using just one HDMI cable.  It can be activated when HDMI Audio is ON.
 Be sure to select the correct Digital Output or
• Auto : Listen to TV sound from the Home
you will hear no sound or just loud noise.
Cinema speakers if your TV is compatible with  If the HDMI device (AV receiver, TV) is not
the Audio Return Channel function.
compatible with compressed formats (Dolby
• Off : Turn the Audio Return Channel function digital, DTS), the audio signal outputs as PCM.
off.  Regular DVDs do not have BONUSVIEW audio
✎ NOTE 
and Navigation Sound Effects.
Some Blu-ray Discs do not have BONUSVIEW
 When Anynet+(HDMI-CEC) is Off, the Audio audio and Navigation Sound Effects.
Return Channel function is not available.  This Digital Output setup does not effect the
 Using an ARC (Audio Return Channel)- analogue (L/R) audio or HDMI audio output to
uncertified HDMI cable may cause a your TV.
problem in compatibility. It effects the optical and HDMI audio output
 ARC function is only available if an ARC- when your product is connected to an AV
compliant TV is connected. receiver.
 If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your
Digital Output selections (PCM or Bitstream).

English 31
HT-D4500_ELS_1223.indd 31 2011-12-23 3:59:05
 Setup
Digital Output Selection

Bitstream Bitstream
Bitstream
Setup PCM (Re-encoded (Re-encoded
(Unprocessed)
DTS) Dolby D)
HDMI supported HDMI supported HDMI supported HDMI supported
Connection
AV receiver AV receiver AV receiver AV receiver
Re-encoded
PCM Up to 7.1ch PCM DTS re-encoded
Dolby Digital *
Re-encoded
Dolby Digital Up to 7.1ch Dolby Digital DTS re-encoded
Dolby Digital *
Re-encoded
Dolby Digital Plus Up to 7.1ch Dolby Digital Plus DTS re-encoded
Dolby Digital *
Audio Stream on Re-encoded
Dolby TrueHD Up to 7.1ch Dolby TrueHD DTS re-encoded
Blu-ray Disc Dolby Digital *
Re-encoded
DTS Up to 6.1ch DTS DTS re-encoded
Dolby Digital *
Re-encoded
DTS-HD HRA Up to 7.1ch DTS-HD HRA DTS re-encoded
Dolby Digital *
Re-encoded
DTS-HD MA Up to 7.1ch DTS-HD MA DTS re-encoded
Dolby Digital *
PCM PCM 2ch PCM 2ch PCM 2ch PCM 2ch
Audio Stream
Dolby Digital Up to 5.1ch Dolby Digital Dolby Digital Dolby Digital
on DVD
DTS Up to 6.1ch DTS DTS DTS
Outputs only the Decodes the main Decodes the main
main feature audio feature audio and feature audio and
Decodes the main
stream so that your BONUSVIEW audio BONUSVIEW audio
feature audio and
AV receiver can stream together stream together into
BONUSVIEW audio
Definition for decode the audio into PCM audio and PCM audio and adds
Any stream together
Blu-ray Disc bitstream. adds Navigation Navigation Sound
into PCM audio and
You will not hear Sound Effects, then Effects, then re-
adds Navigation
BONUSVIEW re-encodes the encodes the PCM
Sound Effects.
audio or Navigation PCM audio into DTS audio into Dolby digital
Sound Effects. bitstream. bitstream or PCM.

* If the Source Stream is 2ch, “Re-encoded Dolby D” Setting are not applied. Ouput will be LPCM 2ch.

Dynamic Range Control • Off : You can enjoy the movie with the
standard Dynamic Range.
You can listen at low volumes, but still hear dialog • On : When Movie soundtracks are played at
clearly. This is only active if your product detects low volume or through smaller speakers, the
a Dolby Digital signal. system can apply appropriate compression to
• Auto : The Dynamic Range Control will be set make low-level content more intelligible and
automatically based on the information prevent dramatic passages from getting too
provided by the Dolby TrueHD Soundtrack. loud.

32 English

HT-D4500_ELS_1223.indd 32 2011-12-23 3:59:06

 03
Setup
Audio Sync Wired Network

Video may look slower than the audio when the

Setting Up a Wired Connection - Auto
product is connected to a digital TV. If this
occurs, adjust the audio delay time to match the 1. Press the ▲▼ buttons to select Wired.
video.
• You can set the audio delay time between Settings
0 msec and 300 msec. Set it to the optimal Display Network Settings

Select a network connection type.

status. Audio
Network Wired
System
Wireless
Language (General)
Connect to the network using LAN cable. Please make
Network Security WPS(PBC) sure that the LAN cable is connected.

General One Foot

Connection
Before you begin, contact your ISP to find out if Support
> Move " Enter ' Return

your IP address is static or dynamic. If it is

dynamic, and you are using a wired or wireless
connection, we recommend using the Auto 2. Press the ENTER button.
procedures. If you are using a wireless The Network Status screen appears. The
connection and your router has the capability, product connects to the network after the
you can use WPS(PBC) or One Foot Connection. network connection is verified.
If your IP address is static, you must use the
manual set up procedure for both wired and Setting Up a Wired Connection - Manual
wireless connections.
If you have a static IP address or the Auto Setting
does not work, you’ll need to set the Network
Network Settings Settings values manually.
To begin setting up the network connection for To view your Network Settings values on most
your product, follow these steps: Windows computers, follow these steps:
1. In the Home menu, press the ◄► buttons to 1. Right click the Network icon on the bottom
select Settings, and then press the ENTER right of the Windows desktop.
button.
2. In the pop-up menu, click Status.
2. Press the ▲▼ buttons to select Network, and
then press the ENTER button. 3. On the dialog that appears, click the Support
tab.
3. Press the ▲▼ buttons to select Network
Settings, and then press the ENTER button. 4. On the Support tab, click the Details button.
The Network settings are displayed.
4. Press the ▲▼ buttons to select Wired, Wireless
(General), WPS(PBC) or One Foot Connection,
and then press the ENTER button.
5. If you have a wired network, go to Wired Network To enter the Network settings into your product,
below. If you have a wireless network, go to follow these steps:
Wireless Network on pages 34~36. 1. Press the ▲▼ buttons to select Wired, and
then press the ENTER button.
2. Press the ◄► buttons to select IP Settings,
and then press the ENTER button.

English 33
HT-D4500_ELS_1223.indd 33 2011-12-23 3:59:06
 Setup
Setting Up the Wireless Network Connection
Settings
IP Settings
- Auto
Display
Audio IP Mode Manual Most wireless networks have an optional security
Network IP Address 0 . 0 . 0 . 0
System Subnet Mask 0 . 0 . 0 . 0 system that requires devices that access the
Language
Gateway 0 . 0 . 0 . 0 network to transmit an encrypted security code
DNS Mode Manual
Security
DNS Server 0 . 0 . 0 . 0 called an Access or Security Key. The Security
General
Support
OK Key is based on a Pass Phrase, typically a word
> Move " Enter ' Return
or a series of letters and numbers of a specified
length you were asked to enter when you set up
security for your wireless network. If you use this
3. Press the ENTER button to select IP Mode. method of setting up the network connection,
and have a Security Key for your wireless
4. Press the ▲▼ buttons to select Manual,
network, you will have to enter the Pass Phrase
and then press the ENTER button.
during the Auto setup process.
5. Press the ▼ button to go to the first entry
field (IP Address). 1. Press the ▲▼ buttons to select Wireless
(General).
6. Use the number buttons on your remote to
enter numbers.
Settings
7. When done with each field, press the ► Display
Network Settings
Select a network connection type.
button to move successively to the next field. Audio

You can also use the other arrow buttons to Network

Wired
System
move up, down, and back. Wireless
Language (General)
Set up wireless network by selecting your Wireless
8. Enter the IP Address, Subnet Mask, and Security WPS(PBC) Router. You may need to enter security key depending
on the setting of the Wireless Router.
General One Foot
Gateway values. Support Connection
> Move " Enter ' Return
9. Press the ▼ button to go to DNS Mode.
10. Press the ▼ button to go to the first DNS
entry field. Enter the numbers as above. 2. Press the ENTER button.
11. Press the ENTER button to select OK. When done, it displays a list of the available
The Network Status screen appears. The networks.
product connects to the network after the
3. Press the ▲▼ buttons to select the desired
network connection is verified.
network, and then press the ENTER button.
The Security screen appears.
Wireless Network
4. On the Security screen, enter your network’s
You can setup a wireless network three ways: Pass Phrase. Enter numbers directly using
• Wireless (General) your remote control.
To select a letter, press the ▲▼◄► buttons
• Using WPS(PBC).
to move the cursor, then press the ENTER
• One Foot Connection button.
Wireless (General) includes both Automatic and
Manual setup procedures.

34 English

HT-D4500_ELS_1223.indd 34 2011-12-23 3:59:07

 03
Setup
Settings Settings
Display Network Settings Display IP Settings

Audio Enter security key. 0 entered Audio IP Mode Manual

Network Network IP Address 0 . 0 . 0 . 0
a b c d e f 1 2 3 Subnet Mask 0 . 0 . 0 . 0
System System
g h i j k l 4 5 6 Gateway 0 . 0 . 0 . 0
Language Language
m n o p q r 7 8 9 DNS Mode Manual
Security Security
s t u v w x y z 0 DNS Server 0 . 0 . 0 . 0
General General
a/A * Delete Space Done OK
Support a Previous m Move " Enter ' Return Support
> Move " Enter ' Return

✎ NOTE 3. On the Network Status screen, select

 You should be able to find the Pass Phrase on Cancel, and then press Enter.
one of the set up screens you used to set up 4. Press the ◄► buttons to select IP Settings,
your router or modem. and then press the ENTER button.
5. Press the ENTER button to select IP Mode.
5. When done, press the ▲▼◄► buttons to
move the cursor to Done, and then press the 6. Press the ▲▼ buttons to select Manual,
ENTER button. and then press the ENTER button.
The Network Status screen appears. The 7. Press the ▼ button to go to the first entry
product connects to the network after the field (IP Address).
network connection is verified. 8. Use the number buttons to enter numbers.
Setting Up the Wireless Network Connection 9. When done with each field, press the ►
- Manual button to move successively to the next field.
You can also use the other arrow buttons to
If the Auto Setting does not work, you need to move up, down, and back.
enter the Network settings values manually.
10. Enter the IP Address, Subnet Mask, and
To view the Network Settings values on most Gateway values.
Windows computers, follow these steps:
11. Press the ▼ to go to DNS Mode.
1. Right click the Network icon on the bottom
12. Press the ▼ button to go to the first DNS
right of the screen. entry field. Enter the numbers as above.
2. In the pop-up menu, click Status.
13. The Network Status screen appears. The
3. On the dialog that appears, click the Support product connects to the network after the
tab. network connection is verified.
4. On the Support tab, click the Details button.
The Network settings are displayed. WPS(PBC)
To enter the Network settings into your product, The easiest way to set up the wireless network
follow these steps: connection is using the WPS(PBC) function or the
One Foot Connection function.
1. Follow Steps 1 through 5 in the ‘Setting Up
the Wireless Network Connection - Auto’ If your wireless router has a WPS(PBC) button,
procedure. follow these steps:

2. When done, press the ▲▼◄► buttons to 1. Press the ▲▼ buttons to select WPS(PBC).
move the cursor to Done, and then press the
ENTER button. The Network Status screen
appears.

English 35
HT-D4500_ELS_1223.indd 35 2011-12-23 3:59:09
 Setup
Settings
Network Status
Network Settings
Display
Audio
Select a network connection type. Check whether a connection to the network and
Network
the Internet have been established.
Wired
System
Wireless
Language (General)
Connect to the Wireless Router easily by pressing the
Security WPS(PBC) WPS(PBC) button. Choose this if your Wireless Router
Settings Network Status
supports Push Button Configuration(PBC).
General One Foot Display
MAC Address XX:XX:XX:XX:XX:XX
Support Connection Audio IP Address 0.0.0.0
> Move " Enter ' Return Subnet Mask 0.0.0.0
Network KT_WLAN Gateway 0.0.0.0
System DNS Server 0.0.0.0
Internet is connected successfully.
Language
If you have a problem using any Internet services, contact your Internet service
provider.
Security
2. Press the ENTER button. General
Support Network Settings IP Settings Retry OK
3. Press the WPS(PBC) button on your router < Move " Enter ' Return
within two minutes. Your product displays
the Network Selection Screen, and
automatically acquires all the network
settings values it needs and connects to your BD-LIVE Internet Connection
network. When it is done, it displays an OK
button. Press the ENTER button on your Set to allow or prohibit an Internet connection
remote. when you use the BD-LIVE service.
• Allow (All) : The Internet connection is allowed
One Foot Connection for all BD-LIVE contents.
• Allow (Valid Only) : The Internet connection is
You can set up the wireless connection allowed only for BD-LIVE contents containing a
automatically if you have a Samsung Wireless valid certificate.
Router which supports One Foot Connection. To • Prohibit : No Internet connection is allowed for
connect using the One Foot Connection function, any BD-LIVE content.
follow these steps:
1. Press the ▲▼ buttons to select One Foot
Connection.
✎ NOTE
 What is a valid certificate?
When the product uses BD-LIVE to send the
Settings
Display
Network Settings disc data and a request to the server to certify
Select a network connection type.
Audio the disc, the server uses the transmitted data
Network
Wired
to check if the disc is valid and sends the
System
Wireless certificate back to the product.
Language (General)
Security WPS(PBC)
Connect to your wireless network automatically if your
Wireless Router supports One Foot Connection. Select  The Internet connection may be restricted
this connection type after placing the Wireless Router
General One Foot
within 10 inches(25cm) of Samsung Wireless LAN Adapter. while you are using BD-LIVE contents.
Support Connection
> Move " Enter ' Return

System
2. Press the ENTER button. Initial Settings
3. Place the Samsung Wireless Router within
25 cm (10 inches) of Samsung Wireless LAN By using the Initial Settings function, you can set
Adapter to connect. the language, Network Settings, etc.
4. Wait until the connection is automatically For more information about the Initial Settings
established. function, refer to the Initial Settings section of this
user manual. (See page 25)

36 English

HT-D4500_ELS_1223.indd 36 2011-12-23 3:59:10

 03
Setup
Anynet+ (HDMI-CEC)  Only those USB devices formatted in FAT file
system (DOS 8.3 volume label) are supported.
Anynet+ is a convenient function that offers linked We recommend you use USB devices that
operations with other Samsung products that support USB 2.0 protocol with 4 MB/sec or
have the Anynet+ feature. faster read/write speed.
To operate this function, connect this product to  The Resume Play function may not work after
a Samsung TV with an HDMI cable. you format the storage device.
With Anynet+ on, you can operate this product  The total memory available to BD Data
using a Samsung TV remote control and start Management may differ, depending on the
disc playback simply by pressing the PLAY (►) conditions.
button on the TV’s remote control.
For more information, please see the TV user Time Zone
manual.
• Off : Anynet+ functions will not work. You can specify the time zone that is applicable
to your area.
• On : Anynet+ functions will work.

✎ NOTE Settings
Time Zone
 This function is not available if the HDMI cable Display
Audio
does not support CEC. Network
 If your Samsung TV has an Anynet+ logo, then System

it supports the Anynet+ function. Language

Security
 Depending on your TV, certain HDMI output General GMT + 00:00

resolutions may not work. Support

London, Lisbon, Casablanca
< Change " Save ' Return
Please refer to the user manual of your TV.

BD Data Management
Lets you manage the downloaded contents you DivX® Video On Demand
accessed through a Blu-ray Disc that supports Shows the registration code authorized for the
the BD-LIVE service and stored on an attached product. If you connect to the DivX web site and
Flash memory device. register using that code, you can download the
You can check the device’s information including VOD registration file. If you activate the VOD
the storage size, delete the BD data, or change registration using My Contents, the registration is
the Flash memory device. completed.

BD Data Management Screen Information : ✎ NOTE

• Current Device : Display the selected device.  For more information about DivX(R) VOD, visit
“http://vod.divx.com”.
• Total Size : Total memory size of the device.
• Available Size : Available memory in the Reset
device.
• Delete BD Data : Delete all BD data in the All settings will revert to the default except for the
storage. network and Smart Hub settings. You need enter
• Select Device : Change location of desired the password for this function.
memory to store BD data.
✎ NOTE
✎ NOTE  The default password is 0000.
 In the external memory mode, disc playback
may be stopped if you disconnect the USB
device in the middle of playback.

English 37
HT-D4500_ELS_1223.indd 37 2011-12-23 3:59:13
 Setup
Language Change Password
You can select the language you prefer for the Change the 4-digit password used to access
Home menu, disc menu, etc. security functions.
• On-Screen Menu : Select the language for the If you forgot your password
on-screen displays.
• Disc Menu : Select the language for the disc 1. Remove the disc.
menu displays. 2. Press and hold the STOP () button on the
• Audio : Select the language for disc audio. front panel for 5 seconds or more.
• Subtitle : Select the language for disc subtitles. All settings will revert to the factory settings.

✎ NOTE ✎ NOTE
 The selected language will only appear if  When the factory default settings are restored,
all the user stored BD data will be deleted.
it is supported on the disc.

General
Security

This function works in conjunction with Blu-ray Front Display

and DVD discs that have been assigned an age Change the brightness display of the front panel.
rating or numeric rating that indicates the maturity
level of the content. These numbers help you • Auto : Dim during playback.
control the types of Blu-ray and/DVD discs that • Dim : Dim the display window.
your family can watch. • Bright : Brighten the display window.
When you access this function for the first time,
the password setup screen appears. Enter a
✎ NOTE
desired 4-digit password using the number  The Power button and the Function button are
buttons. (The default password is 0000.) not possible to change the Brightness.
After you have set your password, select an age
rating you want to set for the BD Parental Rating Network Remote Control
and a rating level you want to set for the DVD The Network Remote Control function lets you
Parental Rating. The product will only play Blu-ray control your Blu-ray Home Cinema from a remote
discs rated at or below the age rating and DVD device such as a smart phone through a wireless
discs rated below the numeric rating unless the connection to your local area network.
password is entered.
To use the Network Remote Control function, follow
Larger numbers indicate more mature content. these steps:
1. Select On in the Network Remote Control
BD Parental Rating menu.
This will prohibit playback of Blu-ray disc rated 2. Install the Samsung network remote control
above Parental Rating. application to control your product on your
compatible portable device.
DVD Parental Rating 3. Make sure your portable device and your
product are connected to the same wireless
Prevent playback of DVD discs with specific router.
numerical ratings unless a password is entered.
4. Start the application on your portable device.
The application should find your product and
display it on a list.
5. Select the product.

38 English

HT-D4500_ELS_1223.indd 38 2011-12-23 3:59:14

 03
✎ NOTE

Setup
6. If this is the first time you are using the
function, it will ask you to allow or deny
 Your product must be connected to the
remote control of the product. Select Allow.
Internet to use the By Internet function.
7. Follow the instructions that came with the  The upgrade is complete when the product
application to control the product. turns off, and then turns on again by itself.
 Never turn the product off or back on
Support manually during the update process.
 Samsung Electronics shall take no legal
Software Upgrade responsibility for product malfunction
caused by an unstable Internet connection
The Software Upgrade menu allows you to or consumer negligence during a software
upgrade the product’s software for performance upgrade.
improvements or additional services. You can
upgrade in four ways:  If you want to cancel the upgrade while the
upgrade software is downloading, press the
• By Internet ENTER button.
• By USB
• By Disc By USB
• Via download (File) To upgrade by USB, follow these steps:
The four methods are explained below. 1. Visit www.samsung.com/bluraysupport
2. Download the latest USB software upgrade
By Internet zip archive to your computer.
To upgrade by Internet, follow these steps: 3. Unzip the zip archive to your computer. You
1. Select By Internet, and then press the should have a single folder with the same
ENTER button. The Connecting to Server name as the zip file.
message appears. 4. Copy the folder to a USB flash drive.
2. If there is a download available, the 5. Make sure the disc tray is empty, and then
Download pop-up appears with a progress insert the USB flash drive into the USB port
bar and the download starts. of the product.
3. When the download is complete, the 6. In the product’s menu, go to Settings >
Upgrade Query window appears with three Support > Software Upgrade.
choices: Upgrade Now, Upgrade Later, or 7. Select By USB.
Don’t Upgrade.
4. If you select Upgrade Now, the product ✎ NOTE
upgrades the software, turns off, and then
 The disc tray must be empty when you
turns on automatically.
upgrade the software using the USB Host
5. If you do not make a selection in one minute jack.
or select Upgrade Later, the product stores
the new upgrade software. You can upgrade
 When the software upgrade is done, check
the software details in the software Upgrade
the software later using the Via download
menu.
function.
6. If you select Don’t Upgrade, the product
 Do not turn off the product during the
software upgrade. It may cause the product
cancels the upgrade.
to malfunction.
 Software upgrades using the USB Host jack
must be performed with a USB memory
flash stick only.

English 39
HT-D4500_ELS_1223.indd 39 2011-12-23 3:59:14
 Setup
By Disc ✎ NOTE
To upgrade by Disc, follow these steps:  When the system upgrade is done, check the
software details in the software Upgrade
1. Visit www.samsung.com/bluraysupport.
menu.
2. Download the latest disc software upgrade
zip archive to your computer.
 Do not turn off the product during the software
Upgrade. It may cause the product to
3. Unzip the zip archive to your computer. You malfunction.
should have a single folder with the same
name as the zip file.
 To use the Via download function, your
product must be connected to the Internet.
4. Write the folder onto a disc. We recommend
a CD-R or DVD-R. Download in Standby Mode
5. Finalise the disc before you remove it from You can set the Download in Standby Mode
your computer. function so that the product downloads new
6. Insert the disc into product. upgrade software when it is in Standby mode. In
7. In the product’s menu, go to Settings > Standby mode, the product is off, but its Internet
Support > Software upgrade. connection is active. This allows the product to
download upgrade software automatically, when
8. Select By Disc. you are not using it.

✎ NOTE To set Download in Standby Mode, follow these

steps:
 When the system upgrade is done, check the
software details in the software Upgrade menu. 1. Press the ▲▼ buttons to select Download
in Standby Mode, and then press the
 Do not turn off the product during the Software
ENTER button.
Upgrade. It may cause the product malfunction.
2. Select On or Off.
Via download • Off : If you select Off, the product will notify
The Via download option lets you upgrade using a you with a pop up message when new
file the product downloaded earlier but you upgrade software is available.
decided not to install immediately or a file • On : If you select On, the product will
downloaded by the product in Standby Mode (See automatically download new upgrade
Download in Standby Mode below). software when it is in Standby mode with
To upgrade Via download, follow these steps: the power off. If it downloads new upgrade
software, the product will ask you if you
1. If upgrade software has been downloaded,
want to install it when you turn the product
you will see the software version number to
on.
the right of Via download.
2. Select Via download, and then press the
ENTER button.
✎ NOTE
 To use the Download in Standby Mode
3. The product displays a message asking if function, your product must be connected to
you want to upgrade. Select Yes. The the Internet.
product begins the upgrade.
4. When the update is complete, the product
turns off automatically, and then turns on. Contact Samsung
Provides contact information for assistance with
your product.

40 English

HT-D4500_ELS_1223.indd 40 2011-12-23 3:59:15

 Basic Functions

04
Basic Functions
Playing a Disc Disc Structure
The content of discs are usually divided as shown
Playback below.

1. Press the OPEN/CLOSE ( ) button to open • Blu-ray Disc, DVD-VIDEO

the disc tray. title 1 title 2
2. Place a disc gently into the tray with the chapter 1 chapter 2 chapter 1 chapter 2 chapter 3
disc’s label facing up.

• Audio CD (CD-DA)

track 1 track 2 track 3 track 4 track 5

3. Press the OPEN/CLOSE ( ) button to close • MP3, WMA, DivX, MKV and MP4
the disc tray.
folder (group) 1 folder (group) 2
4. Press the PLAY (►) button.
file 1 file 2 file 1 file 2 file 3

Playback related buttons

PLAY ( ►) Starts playback.

Using the Disc menu/Title menu/
Stops playback. Popup menu
• If you press the button
once : The stop position is
STOP (  ) memorized. Using the Disc Menu
• If you press the button twice
: The stop position is not
memorized.
hZ
DISC MENU
1. During playback, press the DISC
PAUSE (  ) Pauses playback. MENU button on the remote
control.
2. Press the ◄ ► buttons to make
✎ NOTE a selection, and then press the
 For some discs, pressing the STOP (  ) ENTER button.
button once may not memorize the stop
position.
✎ NOTE
 Depending on the disc, the menu items may
 Video files with high bit rates of 20Mbps or differ and this menu may not be available.
more strain the product’s capabilities and
may stop playing during play back.

English 41
HT-D4500_ELS_1223.indd 41 2011-12-23 3:59:15
 Basic Functions
Using the Title Menu Using the Search and Skip Functions

Z During playback, you can search quickly through

a chapter or track, and use the skip function to
1. During playback, press the TITLE TITLE MENU jump to the next selection.
MENU button on the remote POPUP

control. Searching for a Desired Scene

2. Press the ◄ ► buttons to
make the desired selection, then
press the ENTER button. hzZyx
✎ NOTE • During playback, press the SEARCH ()
button.
 Depending on the disc, the menu items may Each time you press the SEARCH ()
differ and this menu may not be available. button, the playback speed will change as
 The Title Menu will only be displayed if there follows.
are at least two titles on the disc.
BD-ROM,
)1)2)3
BD-RE/-R,
) 4 ) 5  ) 6  ) 7
Using the Popup Menu DVD-RW/-R,
(1(2(3
DVD+RW/+R,
( 4 ( 5  ( 6  ( 7
h DVD-VIDEO

1. During playback, press the POPUP TITLE MENU )1)2)3

DivX, MKV, MP4
button on the remote control. POPUP (1(2(3
2. Press the ◄ ► buttons or
• To return to normal speed playback, press the
ENTER button to select the desired
PLAY (►) button.
menu.

✎ NOTE ✎ NOTE
 Depending on the disc, the menu items may  No sound is heard during search mode.
differ and this menu may not be available.
 If you press the  or  button too quickly
this product might think you are just holding
the button down. This will lead to improper
Playing the Title List operation, be sure to not press these buttons
too rapidly.

z Skipping Chapters
1. During playback, press the DISC DISC MENU

MENU or TITLE MENU button.

2. Press the  buttons to select TITLE MENU hzZyx
an entry you want to play from POPUP
• During playback, press the SKIP (#$)
Title List, then press the ENTER
button.
button.
If you press the SKIP ($) button, it moves to
the next chapter.
If you press the SKIP (#) button, it moves to
the beginning of the chapter. One more press
makes it move to the beginning of the previous
chapter.

42 English

HT-D4500_ELS_1223.indd 42 2011-12-23 3:59:16

 04
Basic Functions
Slow Motion Play/Step Motion Play
Repeat > Off

Slow Motion Play

hzZyx 3. To return to normal play, press the REPEAT

button again.
• In pause (  ) mode, press the SEARCH ()
button. 4. Press the ▲▼ buttons to select Off, the
If you press the SEARCH () button, the press the ENTER button.
playback speed is reduced to
* 1/8 * 1/4 * 1/2 ✎ NOTE
• To return to normal speed playback, press the  Depending on the disc, the Repeat function
PLAY (► ) button. may not be available.

✎ NOTE Repeat the Section

 No sound is heard during slow mode.
 Slow motion operates only in the forward
direction. hzZy
1. During playback, press the REPEAT REPEAT
Step Motion Play button on the remote control.
2. Press the ▲▼ buttons to select
hzZyx REPEAT A-B.
• In pause mode, press the PAUSE (  ) button.
Each time the PAUSE (  ) button is pressed, a Repeat > Repeat A-B : Off " Mark A

new frame will be appear.

• To return to normal speed playback, press the
PLAY ( ► ) button.

✎ NOTE 3. Press the ENTER button at the point where

you want repeat play to start (A).
 No sound is heard during step mode.
4. Press the ENTER button at the point where
 Step motion operates only in the forward
you want repeat play to stop (B).
direction.
5. To return to normal play, press the REPEAT
Repeat Playback button again.
6. Press the ENTER button.
Repeat the Title or Chapter
✎ NOTE
 If you set point (B) before 5 seconds has
hzZyx lapsed, the prohibition message will appear.
Repeat the disc title or chapter.  Depending on the disc, the Repeat function
may not be available.
REPEAT
1. During playback, press the REPEAT
button on the remote control.
2. Press the ▲▼ buttons to select
Chapter or Title, then press the
ENTER button.

English 43
HT-D4500_ELS_1223.indd 43 2011-12-23 3:59:18
 Basic Functions
Using the TOOLS button  Information about the primary / secondary
mode will be also displayed if the Blu-ray Disc
During playback, you can operate disc TOOLS has a BONUSVIEW section.
menu by pressing the TOOLS button. Use the ◄► button to switch between
primary and secondary audio modes.
• TOOLS Menu Screen
 This function depends on what audio
languages are encoded on the disc and may
Tools
not be available.
Title Search 1/2
Chapter Search : 1/20  Some Blu-ray Discs may allow you to select
Time Search : 00:00:13/01:34:37
Picture Settings : Normal
either the multi-channel LPCM or Dolby digital
Audio : 1/4 ENG Multi CH audio soundtrack in English.
User EQ
Subtitle : 0/7 Off
Angle : 1/1

< Change " Enter ' Return Selecting the Subtitle Language

hZx
✎ NOTE 1. During playback, press the TOOLS button.
▪ Depending on the disc, the TOOLS menu 2. Press the ▲▼ buttons to select Subtitle.
may differ.
3. Press the ◄► buttons to select the desired
subtitle language.
Moving to a Desired Scene Directly
✎ NOTE
hzZy  Depending on the Blu-ray Disc / DVD, you may
be able to change the desired subtitle in the
1. During playback, press the TOOLS button. Disc Menu.
2. Press the ▲▼ buttons to select Title Press the DISC MENU button.
Search, Chapter Search or Time Search.  This function depends on what subtitles are
encoded on the disc and may not be available
3. Enter the desired Title, Chapter or Playing
Time using the number buttons, then press on all Blu-ray Discs/DVDs.
the ENTER button.  Information about the primary / secondary
mode will also be displayed if the Blu-ray Disc
Selecting the Audio Language has a BONUSVIEW section.
 This function changes both the primary and
secondary subtitles at the same time.
hzZx  The total number of subtitles is the sum of the
primary and secondary ones.
1. During playback, press the TOOLS button.
2. Press the ▲▼ buttons to select Audio.
3. Press the ENTER button.
4. Press the ▲▼ buttons to select the audio
language you want.

✎ NOTE
 The ◄► indicator will not be displayed on the
screen if the BONUSVIEW section does not
contain any BONUSVIEW audio settings.

44 English

HT-D4500_ELS_1223.indd 44 2011-12-23 3:59:23

 04
Basic Functions
Caption Function • User : The user can adjust the Sharpness,

x Noise reduction, Contrast, Brightness,

Color, Tint function respectively.

• You must have some experience with video ✎ NOTE

extraction and editing in order to use this  If the system is connected to a BD Wise-
feature properly. compliant TV that has set BD Wise to On, the
• To use the caption function, save the caption picture setting menu will not appear.
file (*.smi) in the same file name as that of the
DivX media file (*.avi) within the same folder.
Example. Root Samsung_007CD1.avi Setting the BONUSVIEW
Samsung_007CD1.smi
• Up to 60 alphanumeric characters or 30 East Asian h
characters (2 byte characters such as Korean and
Chinese) for the file name. The BONUSVIEW feature allows you to view
additional content (such as commentaries) in a
small screen window while the movie is playing.
Changing the Camera Angle This function is only available if the disc has the
bonusview feature.
hZ
When a Blu-ray Disc/DVD contains multiple
angles of a particular scene, you can use the
ANGLE function.
1. During playback, press the TOOLS button.
2. Press the ▲▼ buttons to select Angle.
3. Press the ◄► buttons to select the desired
Angle.

Selecting the Picture Settings Primary a audio/video Secondary a audio/video

hzZy 1. During playback, press the TOOLS button.

This function enables you to adjust video quality. 2. Press the ▲▼ buttons to select BONUSVIEW
Video or BONUSVIEW Audio.
1. During playback, press the TOOLS button.
3. Press the ◄► buttons to select the desired
2. Press the ▲▼ buttons to select Picture bonusview.
Settings, then press the ENTER button.
3. Press the ◄► buttons to select the desired ✎ NOTE
Mode.  If you switch from BONUSVIEW Video,
• Dynamic : Choose this setting to increase BONUSVIEW Audio will change automatically
Sharpness. in accordance with BONUSVIEW Video.
• Normal : Choose this setting for most Tools
viewing applications.
BONUSVIEW Video Off
• Movie : This is the best setting for watching BONUSVIEW Audio : 0/1 Off
movies. Picture Settings

< Change " Enter

English 45
HT-D4500_ELS_1223.indd 45 2011-12-23 3:59:25
 Basic Functions
Listening to Music
7 ENTER button : Plays the selected track.

ow ► button : During playback, moves to the next

page in the Music List or moves to the next track
Buttons on the Remote Control in the Playlist.
8
used for Music Playback ◄ button : During playback, moves to the
previous page in the Music List or moves to the
previous track in the Playlist.
RDS DISPLAY TA

1 2  9 STOP button : Stops a track.

PTY- PTY SEARCH PTY+

4 5 6 0 $ button : Plays the next track.

@
7 8 9 # button : Plays the previous track.
FULL SCREEN REPEAT
If you press this button after three seconds of
0 1 playback in the Playlist, the current track will be
! !
2 replayed from the beginning. But, if you press this
button within three seconds after playback starts
0 in the Playlist, the previous track will be played.
3
NUMBER button : During the Playlist playback,
9 MUTE
4 @ press the desired track number. The selected
TOOLS INFO track will be played. (only Audio CD(CD-DA))
8
5
7 RETURN EXIT

TUNER
MEMORY

A B C D 6
SMART SEARCH S/W LEVEL DSP
HUB

REPEAT button : Selects the play mode in the

1
Playlist.
SEARCH buttons :
2 Audio CD (CD-DA) - Fast Play.
MP3 - Jump Play. (10 seconds)

3 PAUSE button : Pauses playback.

4 PLAY button : Plays the currently selected track.

▲▼ buttons : Selects a track in the Music List

5
or Playlist.
YELLOW(C) button : Select Edit Mode or Play
6
Mode.

46 English

HT-D4500_ELS_1223.indd 46 2011-12-23 3:59:25

 04
Basic Functions
Playing an Audio CD (CD-DA)/MP3 Repeat an Audio CD (CD-DA)/MP3
REPEAT
1. Insert an Audio CD (CD-DA) or an MP3 Disc 1. During the Playlist playback, press
into the disc tray. the REPEAT button.
• For an Audio CD (CD-DA), the first track will 2. Select the desired play mode by
be played automatically. pressing the REPEAT button repeatedly.
• For an MP3 disc, press the ◄► buttons to
select Music, then press the ENTER Tracks on a disc are played
Audio CD
button. Off in the order in which they
(CD-DA)/MP3
were recorded on the disc.
Audio CD (CD-DA)/MP3 Screen Elements ( ) One Audio CD
Current track is repeated.
Song (CD-DA)/MP3
1 2 3
Audio CD
( ) All All tracks are repeated.
(CD-DA)/MP3
Music
1/13

TRACK 001 TRACK 001

00:43
✎ NOTE
TRACK 002
03:56
 During playback, press the TOOLS button and
TRACK 003 set Shuffle Mode to On. You can play the
7 04:41
TRACK 004 tracks in the random order.
6 + 00:13 / 00:43 04:02

Audio CD " Enter < Page Tools ' Return

Playlist
1. Insert an Audio CD (CD-DA) or an MP3 Disc
5 4 into the disc tray.
• For an Audio CD (CD-DA), the first track will
be played automatically.
1 Displays the music information.
• For an MP3 disc, press the ◄► buttons to
2 Displays the playlist. select Music, then press the ENTER
button.
3 Shows the current track/total tracks. 2. To move to the Music List, press the STOP ()
or RETURN button.
4 Displays buttons available. The Music List screen is displayed.

5 Shows the current play time/total play time. 3. Press the YELLOW(C) button to switch to
Edit Mode.
6 Displays the current playback status. 4. Press ▲▼◄► to select a desired track.
Then, press ENTER. Repeat this procedure
7 Displays the repeated playback status. to select additional tracks.
• The selected file will be checked.
2. Press the ▲▼ buttons to select the track • To cancel your selection, press ENTER
you want to play, and then press the ENTER again to uncheck the track.
button.

English 47
HT-D4500_ELS_1223.indd 47 2011-12-23 3:59:26
 Basic Functions
• SMART SOUND : This will regulate and
Audio CD | Music 1/2 Page
Selected Items : 3 stabilize the volume level against a drastic
TRACK 001 TRACK 002
volume change when changing channels or
00:43 03:56 during a scene transition.
TRACK 003 TRACK 004
04:41 04:02 • MP3 ENHANCER : This also helps enhance
TRACK 005 TRACK 006
03:43 03:40 your sound experience (ex. mp3 music). You
TRACK 007
04:06
TRACK 008
03:52
can upscale your MP3 level sound(24 kHz,
8bit) to CD level sound(44.1 kHz, 16bit).
 Close Edit Mode ( ) Page Tools " Select ' Return • POWER BASS : This function stresses low
tones providing thudding sound effects.
5. Select a desired track and press the TOOLS • VIRTUAL 7.1 : Applies the 7.1 CH sound
button. effect using the 5.1 CH speaker system.
6. To play the selected track(s), select Play • USER EQ : You can configure the equalizer
Selected in the Tools menu and press settings manually to your preference.
ENTER.
SFE(Sound Field Effect) MODE
Music You can set the SFE mode best suited SFE MODE
1/3
for the type of music you are listening
TRACK 001 TRACK 001
00:43
to.
TRACK 002
03:56 Press the SFE MODE button.
TRACK 003
04:41

Symphony
+ 00:13 / 00:43 Provides a clear vocal as if
Hall in Boston
listening in a concert hall.
Audio CD " Enter Tools ' Return
(Hall 1)
Phillharmonic
Provides also a clear vocal as if
7. To return to the Edit Mode, press STOP or Hall in
listening in a concert hall but,
RETURN. Bratislava
less powerful than HALL1.
(Hall 2)
8. To exit Edit Mode, press the YELLOW(C)
button. Jazz Club in
Recommended setting for Jazz.
Seoul B
✎ NOTE
Church in Gives the feel of being in a
 You can create a playlist with up to 99 tracks Seoul grand church.
on Audio CD (CD-DA).
Amphitheater Recommended setting for
(Rock) Rock.
Sound Mode
Off Select this for normal listening.
DSP(Digital Signal Processor) Function
You can select mode to optimize the sound for
sound based on your tastes.
DSP
Press the DSP button.

SMART SOUND  MP3 ENHANCER 

POWER BASS  VIRTUAL 7.1 
USER EQ  DSPOFF

48 English

HT-D4500_ELS_1223.indd 48 2011-12-23 3:59:28

 04
Basic Functions
Dolby Pro Logic II Mode Playing back a Picture

You can select the desired Dolby Pro

Logic II audio mode.
G
Press the PL II button.
Viewing Photo Files
1. Connect a USB memory that contains JPEG
When listening to music, you can files or insert a disc that contains JPEG files.
experience sound effects as if you 2. Press the ◄► buttons to select the My
Music
are listening to the actual Contents, and then press the ENTER button
performance. after press the ▲▼ buttons to select the
Adds realism to the movie Photos.
Movie
soundtrack. 3. Press the ▲▼◄► buttons to select the
You can listen to a 2CH sound source folder you want to play, and then press the
in 5.1CH surround sound with all ENTER button.
speakers active. 4. Press the ▲▼◄► buttons to select the
Prologic
- A specific speaker(s) may not be
photo you want to play, and then press the
output depending on the input
signal. ENTER button.

Matrix
You will hear multi channel surround ✎ NOTE
sound.  You can’t enlarge PG graphic in the full screen
Select this to listen to sound from mode.
Stereo the front left and right speakers and
the subwoofer only. Using the TOOLS button
✎ NOTE During the slide show playback, you TOOLS

 When selecting Dolby Pro Logic II mode, can use various function by pressing
the TOOLS button.
connect your external device to the AUDIO
INPUT jacks (L and R) on the product. If you
connect to only one of the inputs (L or R), you Tools

cannot listen to surround sound. Pause Slide Show

Slide Show Speed : Normal
Slide Show Effect : Blind

S/W LEVEL Background Music :

Background Music Setting
Off

Zoom
You can adjust the subwoofer's level. S/W LEVEL Rotate
Picture Settings
Information

" Enter ' Return

• Pause Slide Show : Select this if you want to

pause the slide show.
• Slide Show Speed : Select to adjust the slide
show speed.
• Slide Show Effect : Select set the slide show
effect.

English 49
HT-D4500_ELS_1223.indd 49 2011-12-23 3:59:31
 Basic Functions
• Background Music : Select this if you want to 2. In Stop mode, connect the USB storage
listen to music while viewing a picture. device to the USB port on the front panel of
• Background Music Setting : Select this if you the product.
want to set the background music setting.
• Zoom : Select this if you want to enlarge the My Contents
current picture. (Enlarged up to 4 times) Videos
• Rotate : Select this if you to rotate the picture. Connected Device
Photos

(This will rotate the picture either clockwise or USB

Music
counter clockwise.)
• Picture Settings : Select this if you want to Function My Devices Internet
" Enter ' Return
Settings

adjust the picture quality.

• Information : Shows the picture information
 Safely Remove USB d WPS(PBC)
including the name and size, etc.

✎ NOTE 3. Press the ENTER button.

 If the system is connected to a BD Wise 4. Press the ▲▼◄► buttons to select the
compliant TV that has set BD Wise to On, the desired Videos, Music or Photos, then press
Picture Settings menu will not appear. the ENTER button.
 Before you can enable the background music 5. For playing back Video, Music or Photo files,
function, the photo file should exist in the same refer to pages 41~50.
storage media with the music file. However,
the sound quality can be affected by the bit
✎ NOTE
rate of the MP3 file, the size of the photo and
 You must remove the USB storage device safely
(by performing the “Safely Remove USB” function)
the encoding method.
in order to prevent a possible damage to the USB
 High bit rate of 20Mbps or more video files can memory. Press the MENU button to move to the
be stopped during the playback. home menu, and select the YELLOW(C) button
and press the ENTER button.
 If you open the tray when playing USB storage
Playing back a USB Storage Device
device, the device mode is changed to “BD/DVD”
automatically.
F
You can use the USB connection to play multimedia
files (MP3, JPEG, DivX, etc) downloaded from the
USB storage device.
1. Move to the home menu.

My Contents
Videos
Photos

Music

Function My Devices Internet Settings

d WPS(PBC)

50 English

HT-D4500_ELS_1223.indd 50 2011-12-23 3:59:34

 04
Basic Functions
Listening to Radio About RDS broadcasting
Using buttons on the Remote Control Using the RDS (Radio Data System) to
receive FM stations
1. Press the FUNCTION button to select FM.
2. Tune in to the desired station. RDS allows FM stations to send an additional
• Preset Tuning 1 : You must first add a desired signal along with their regular program signals.
frequency as a preset. Press the STOP () For example, the stations send their station
button to select PRESET and then press the names, as well as information about what type of
TUNING/CH ( ) button to select the preset program they broadcast, such as sports or
station. music, etc.
• Manual Tuning : Press the STOP () button to When tuned to an FM station which provides the
select MANUAL and then press the TUNING/ RDS service, the RDS indicator lights up on the
CH ( ) button to tune in to a lower or higher display.
frequency.
• Automatic Tuning : Press the STOP () button Description on RDS function
to select MANUAL and then press and hold the • PTY (Program Type) : Displays the type of
TUNING/CH ( ) button to automatically program currently being broadcast.
search the band. • PS NAME (Program Service Name) : Indicates
the name of broadcasting station and is
Setting Mono/Stereo composed of 8 characters.
• RT (Radio Text) : Decodes the text broadcast
Press the MO/ST button.
by a station (if any) and is composed of
• Each time the button is pressed, the
maximum 64 characters.
sound switches between STEREO and
• CT (Clock Time) : Decodes the real time clock
MONO.
from the FM frequency. Some stations may not
• In a poor reception area, select MONO
transmit PTY, RT or CT information therefore
for a clear, interference-free broadcast.
this may not be displayed in all cases.
Presetting Stations • TA (Traffic Announcement) : TA ON/OFF it
shows that the traffic announcement is in
Example : Presetting FM 89.10 into memory progress.
1. Press the FUNCTION button to select FM. ✎ NOTE
2. Press the TUNING/CH ( ) button to select  RDS may not operate correctly if the station
<89.10>. tuned is not transmitting RDS signal properly
3. Press the TUNER MEMORY button. TUNER
MEMORY
or if the signal strength is weak.
• NUMBER flashes on the display. C
4. Press the TUNER MEMORY button
again.
• Press the TUNER MEMORY button
before NUMBER disappears from the
display.
• NUMBER disappears from the display and
the station is stored in memory.
5. To preset another station, repeat steps 2 to 4.
• To tune in to a preset station, press the
TUNING/CH ( ) button to select a
channel.

English 51
HT-D4500_ELS_1223.indd 51 2011-12-23 3:59:38
 Basic Functions
To show the RDS signals To search for a program using the PTY
You can see the RDS signals the station sends codes
on the display.
Before you start!
Press the RDS DISPLAY button while RDS DISPLAY

listening to an FM station. 1 • The PTY Search is only applicable to preset

stations.
• Each time you press the button, the
• To stop searching any time during the process,
display change to show you the
press STOP () button while searching.
following information : PS NAME 
• There is a time limit in doing the following
RT CT  Frequency
steps.
If the setting is cancelled before you finish,
While searching, <PS NAME> start from step 1 again.
PS
appears and then the station • When pressing the buttons on the primary
(Program
names will be displayed. <NO remote control, make sure that you have
Service)
PS> appears if no signal is sent. selected the FM station using the primary
While searching, <RT> appears remote control.
and then text messages the
RT
station sends will be displayed.
(RadioText) RDS DISPLAY TA
<NO RT> appears if no signal is
sent. 㪈 㪉 㪊
PTY- PTY SEARCH PTY+
Station frequency (non-RDS
Frequency 㪋 㪌 㪍
service)

About characters shown in the display 1. Press the PTY SEARCH button while
listening to an FM station.
When the display shows PS,or RT signals,the
2. Press the PTY- or PTY+ button until the PTY
following characters are used.
code you want appears on the display.
• The display window cannot differentiate upper
• The display gives you the PTY codes
case and lower case letters and always uses
described to the right.
upper case letters.
• The display window cannot show accented 3. Press the PTY SEARCH button again, while
letters, <A,> for instance, may stands for the PTY code selected in the previous step is
accented <A’s> like <À, Â, Ä, Á, Å and Ã.> still on the display.
• The centre unit searches 15 preset FM
stations, stops when it finds the one you
PTY (Program Type) indication and
have selected, and tunes in that station.
PTY-SEARCH function

One of the advantages of the RDS service is

that you can locate a particular kind of program
from the preset channels by specifying the PTY
codes.

52 English

HT-D4500_ELS_1223.indd 52 2011-12-23 3:59:40

 04
Basic Functions
Connecting iPod/iPhone Using the USB Cable  iPod nano (5th generation)
 iPod nano (4th generation)
If the system is connected to iPod/iPhone, you  iPod nano (3rd generation)
can play music in iPod/iPhone using the system.  iPod nano (2nd generation)
 iPod nano (1st generation)
 iPhone 4
 iPhone 3GS
 iPhone 3G
 iPhone
5V 500mA

✎ NOTE
 “Made for iPod” means
that an electronic
1. Connect iPod/iPhone using the USB cable to
accessory has been
the front USB port.
designed to connect specifically to iPod and
• Your iPod is automatically turned on. has been certified by the developer to meet
• “iPod” message appears on the TV Apple performance standards.
screen.  “Made for iPhone” means that an electronic
2. Press the ENTER button. accessory has been designed to connect
3. Select the music file to play. specifically to iPhone and has been certified
- You can use the remote control or the by the developer to meet Apple
product to control simple playback functions performance standards.
such as the PLAY, PAUSE, STOP, # /$  Apple is not responsible for the operation of
and /buttons. (See page 15.) this device or its compliance with safety and
regulatory standards.
✎ NOTE  The volume control may not operated
 If you want to return to the iPod menus with normally with iPod and iPhone models not
iPod player connected using the USB cable, listed above. If you have a problem with any
press FUNCTION on the remote control or of the models listed above, please update
press on the front panel of the system and the software of the iPod/iPhone to the
select R. IPOD. The FUNCTION mode lastest version.
switches as follows: BD/DVD  D. IN  AUX   Depending on the software version of the
R. IPOD  FM iPod, control problems may occur. This is
not a malfunction of the Home Cinema.
iPod/iPhone Models You Can Use with  Depending on the software version or the
This Product type of the iPod, some operations may
differ. Install the latest iPod software.
 iPod touch (3rd generation) (recommended)
 iPod touch (2nd generation)  Playback of applications' contents through
 iPod touch (1st generation) the product may not be guaranteed. We
 iPod classic recommend playing contents downloaded
 iPod with video on the iPod.
 If you have a problem using iPod, please
 iPod with dock connector visit www.apple.com/support/ipod
 iPod with Click Wheel

English 53
HT-D4500_ELS_1223.indd 53 2011-12-23 3:59:41
 Network Services
You can enjoy various network services such as 3. The Smart Hub screen appears.
Smart Hub or BD-LIVE by connecting the
product to your network. ✎ NOTE
 Certain applications are available only in certain
Read the following instructions before using
countries.
any network service.
1. Connect the product to the network. 4. The Terms of Service Agreement screen
(see pages 23~24) appears.
2. Configure the network settings. If you want to agree, press the ◄► buttons to
select Agree, then press the ENTER button.
(see pages 33~36)
✎ NOTE
Using Smart Hub  Screens can take a few seconds to appear.
Using Smart Hub, you can stream movies, 5. The Service Update screen appears and
videos, and music from the Internet, access installs a number of services and applications.
various for pay or free-of-charge applications and When done, it closes. The applications and
view them on your TV. Application content services downloaded are displayed on the
includes news, sports, weather forecasts, stock Smart Hub screen. This may take some time.
market quotes, maps, photos, and games.
✎ NOTE
 Smart Hub may close momentarily during the
You can also start this function by installation process.
pressing the SMART HUB button
 A number of screens may appear after
on the remote control.
installation. You can press the ENTER button
to close them or let them close on their own.

Starting Smart Hub the First Time 6. To start an application, press the ▲▼◄►
buttons to highlight a application, then press
To start Smart Hub for the first time, follow these
the ENTER button.
steps :

1. Go to the Home menu.

My Contents
Videos

Photos

Music

Function My Devices Internet Settings

 Safely Remove USB d WPS(PBC)

2. Press the ◄► buttons to select Internet,

and press the ENTER button.

54 English

HT-D4500_ELS_1223.indd 54 2011-12-23 3:59:42

 05
Network Services
Smart Hub at a Glance
Navigation Help : Displays the remote control
1 2 3 4 5 buttons you can use to navigate in Smart Hub.
• RED (A) : To log in to Smart Hub.
Search
6 • GREEN (B) : To sort the applications.
Your Video Samsung Apps

Contents 1 Contents 2 Contents 3 Contents 4

• YELLOW (C) : To edit the applications.
Recommended • BLUE (D) : To change the settings of Smart
Contents 1 Contents 2 Contents 3 Contents 4 Contents 5 Contents 6 Hub.
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx

Contents 1 Contents 2 Contents 3 Contents 4 Contents 5 Contents 6

My Applications : Displays your personal gallery
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx 7 of applications which you can add to, modify, and
Contents 7 Contents 8 Contents 9 Contents 10 Contents 11 Contents 12 Contents 13 delete.
xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx

a Login b Sort by  Edit Mode d Settings

✎ NOTE
7 6  Samsung Electronics takes no legal
responsibility for any interruption of the Smart
Commercial : Displays the Smart Hub Guide, Hub service caused by the service provider for
1 an introduction to the product, and new any reason.
application introductions.  The Smart Hub service downloads and
processes data via the Internet so that you can
Your Video : Provides recommendations for
enjoy the Internet contents on your TV screen.
videos based on your tastes.
If the Internet connection is unstable, the
• Lets you see movie recommendations
service may be delayed or interrupted.
based on your previous preferences.
Furthermore, the product may turn off
• Lets you select a movie, displays a list of
automatically in response to conditions on the
VOD (Video on Demand) providers that
2 Internet.
have the movie, and then lets you choose
a provider for streaming. (Streaming is If this occurs, check the Internet connection
unavailable in some areas.) and try again.
• For instructions to use Your Video, please  Application services may be provided in
visit www.samsung.com. English only and the contents available may
• This feature is limited to certain regions. vary, depending on your area.

Search : Provides an integrated search of

 For more information about a Smart Hub
your video providers and connected AllShare service, visit the web site of the applicable
devices. service provider.
• Usable while using Smart Hub (except  The services provided are subject to change
3 when you are watching a Blu-ray Disc). by the Smart Hub service provider without
• For easy access, use the SEARCH button notice.
on the remote control.  The Smart Hub service contents may differ
• For instructions to use search function, depending on the product’s firmware version.
please visit www.samsung.com.
 For pay DivX contents with copy protection
Samsung Apps : You can download various for can only be played through an HDMI cable.
4
pay or free-of-charge application services.
Recommended : Displays recommended
5
contents managed by Samsung.

English 55
HT-D4500_ELS_1223.indd 55 2011-12-23 3:59:44
 Network Services
Using the Keypad Creating an Account
Through your remote, you can use the On- To establish your own, exclusive, configuration of
Screen Keypad to enter letters, numbers, and Smart Hub, create your own Smart TV Account.
symbols. To create an account, follow these steps:

1. Press the RED (A) button on your remote

1 2 3
.,– abc def
control. The Login screen appears.
4 5 6
1 ghi jkl mno Search
Your Video Samsung Apps
7 8 9 Contents 1 Contents 2 Contents 3 Contents 4
pqrs tuv wxyz
Login
Recommended
0
2 Shift Delete 6 Smart TV ID
Contents 1
Press [ENTER]
Contents 2 Contents 3 Contents 4
%
Contents 5

Password xxxxxxxx Press [ENTER]xxxxxxxx

xxxxxxxx xxxxxxxx xxxxxxxx

3 T9 ab Ab AB 1 
Contents 1
 Remember my Smart TV ID and password
Contents 2 Contents 3 Contents 4 Contents 5 Contents 6
Login Cancel
b Input Method / Language: English xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx
Create Account Forgot Password
Contents 7 Contents 8 Contents 9 Contents 10 Contents 11 Contents 12

xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx

4 5 a Login b Sort by  Edit Mode d Settings

The current keypad. 2. Press the ▲▼◄► buttons to select Create

1 Account, and then press the ENTER
Use to enter letters, numbers, and symbols.
button.
Press the FULL SCREEN button on the remote
2 control to shift the input mode. 3. On the next screen, select Smart TV ID, and
: ab, Ab, AB, numbers or icons. then press the ENTER button. An entry
screen and keypad appear.
3 Displays the current input mode.
4. Use the keypad to enter your e-mail
Press the GREEN (B) button on the remote address. This will serve as your ID.
4
control to change the input method. (T9 or ABC)
Press the TOOLS button on the remote control
✎ NOTE
5  The keypad works like the keypad on a cell
to change the language.
phone.
Press the REPEAT button on the remote control
6 5. When done, press the ENTER button to
to delete a character.
select OK, and then press the ENTER
button again. The Create Account screen re-
Entering Text, Numbers and Symbols appears.
To enter text, press the number button on the
6. Select Password, and then press the
remote that corresponds to the letter you want to
ENTER button. The Password screen and a
enter. Press the button rapidly to enter a letter
keypad appear.
that is not the first letter listed on the On-Screen
keypad button. For example, if you want to enter 7. Use the keypad to enter a password.
the letter b, press the 2 button on your remote The password can be any combination of
rapidly twice. To enter the first letter listed on a letters, numbers, and symbols.
button, press, release, and then wait.
To move within the text, use the Arrow buttons. ✎ NOTE
To delete text, move the cursor to the right of the  Press the RED (A) button on your remote to
character you want to delete, and then press the show or hide the password as you enter it.
REPEAT button. To change case or enter
numbers or punctuation, press the FULL
SCREEN button.

56 English

HT-D4500_ELS_1223.indd 56 2011-12-23 3:59:45

 05
Network Services
8. When done, press the ENTER button to 2. Select the Down Arrow next to the Smart
select OK, and then press the ENTER TV ID field, and then press the ENTER
button again. The Login screen re-appears. button.
9. Select Confirm password, and then press 3. Select your ID from the list that appears, and
the ENTER button. then press the ENTER button. The Login
10. Repeat Steps 7 and 8. screen re-appears.

11. When the Login screen re-appears, select 4. Select Password, and then press the
Create Account, and then press the ENTER button. The Password window and
ENTER button. The Confirmation window a keypad appears.
appears. 5. Using the keypad and your remote, enter
12. Select OK, and then press the ENTER your password. When done, press the
button. The Continue to Register Service ENTER button, select OK, and then press
window appears. the ENTER button again.

13. Select Go Register, and then press the ✎ NOTE

ENTER button.  If you want Smart Hub to enter your password
14. The Register Service Account Window automatically, select Remember my Smart TV
appears. ID and password after you have entered your
password, and then press the ENTER button.
• If you have existing accounts with any of A check appears. Smart Hub will now enter
the listed providers, you can associate the
your password automatically when you select
provider account and the provider account
or enter your ID.
password with your Smart TV Account.
Registration makes it easier to access
the providers web site. For registration The Settings Menu - BLUE (D)
instructions, go to Step 2 in Account
Management under the Settings Menu. The Settings Menu Screen gives you access to
• If you don’t have existing provider accounts account management, account reset, and
or do not want to register existing accounts account properties functions.
at this time, select Register Later, and then To access the Settings Menu, and then select a
press the ENTER button. You can also let the menu item, follow these steps:
window close on its own in about a minute.
1. Press the BLUE (D) button on your remote.
✎ NOTE 2. Press the ▲▼ to select a menu item, and
 You must use an e-mail address as an ID. then press the ENTER button.
 You can register up to 10 User Accounts. The functions on the Settings Menu screen are
 You do not need an account to use Smart described below.
Hub.
✎ NOTE
Account Log In  The Service Manager item listed in the Settings
Menu is not available for Blu-ray Home
To log in to your Smart TV Account, follow these
Cinema.
steps:
Account Management
1. With the Smart Hub main screen displayed
on your TV, press the RED (A) button on The Account Management Menu contains
your remote. The Login screen appears. functions that let you register your service
provider accounts, change your Smart Hub
password, and delete or deactivate your Smart
TV Account.

English 57
HT-D4500_ELS_1223.indd 57 2011-12-23 3:59:48
 Network Services
Register Service Account Change Password
If you have existing accounts with any of the The Change Password function lets you change
providers listed by the Register Service Account your Smart Hub password. To change the
function, you can associate the provider account password, follow these steps:
and the provider account password with your
1. Select Change Password, and then press
Smart TV Account. If you associate the account, the ENTER button.
you will be able to log onto the account through
Smart Hub easily, without entering your account 2. Enter your current password. The next
name or password. screen appears.
To use the Register Service Account function, 3. On the next screen, enter a new password
follow these steps: on the first line. Enter it again on the second
line to confirm.
1. In the Settings menu, select Register Service
Account, and then press the ENTER button. 4. The Changing Password Complete message
The Register Service Account Window screen appears. Press the ENTER button or
appears. wait for the screen to close - about 5
seconds.
2. Press the ▲▼ arrow buttons to select a
Service Provider you want to associate with
Remove from TV Account List
your Smart TV Account, and then press the
ENTER button. The Remove from TV Account List function
cancels all your current registered Service
✎ NOTE Accounts that you registered on the Register
 If you have a Samsung account and you want Service Account screen.
to use the Samsung Apps function in Smart
Hub, you must register your Samsung Apps Deactivate Account
account here. See page 61 for more The Deactivate Account function deactivates your
information. Smart TV Account and deletes it and all your
account settings entirely from Smart Hub.
3. Using your remote and the on-screen
Keypad, enter your site ID and password. Service Manager
When done, press the ENTER button.
This menu is for setting the service of the special
✎ NOTE application. (Application-related is like AP
 This is the ID and password you normally use New,Ticker etc.)
to access your account on this site.
✎ NOTE
4. If you have entered the ID and password  This function operates only when special
correctly, the Registered Successfully application is installed.
message appears.
Reset
5. If you pressed ENTER, repeat Steps 2
through 4 to associate another Service The Reset function initializes all downloaded
Provider. application, erases all user accounts and settings
from the product, and resets all Smart Hub
6. When you are done, press the RETURN
settings to the factory default settings. It then
button.
restarts Smart Hub as if it were starting for the
first time. Your account, however, remains on the
Smart Hub server. To log into your account, enter
your ID and password on the Create Account
screen.

58 English

HT-D4500_ELS_1223.indd 58 2011-12-23 3:59:48

 05
Network Services
To use the Reset function, follow these steps: The Edit Mode Menu - YELLOW (C)
1. In the Account Management menu, select
The functions in the Edit Mode menu let you
Reset, and then press the ENTER button.
manipulate the application in the My Applications
The Reset screen appears.
section of the Smart Hub screen. Using these
2. Enter the your Security password. This is the functions, you can lock and unlock access to
password you entered if you set up a BD or some application, New Folder and move
DVD Parental rating (See page 38). If you did application to them, rename folders, delete
not, enter 0000. application, and change the position of
3. After a few moments, Smart Hub application on the screen.
automatically resets. The screen may go To access the Edit Mode Menu, and then select
black, then Smart Hub re-appears. In a few a menu item, follow these steps:
moments, it starts the re-initialization 1. Press the YELLOW (C) button on your
procedure. remote. The Edit Mode menu bar appears
4. To complete the re-initialization, go to Step 4 on the bottom of the screen.
in Starting Smart Hub for the First Time. (See 2. Press the ▲▼◄► to select a menu item,
page 54) and then press the ENTER button.
✎ NOTE The functions in the Edit Mode Menu bar are
 If you forgot your password, press the STOP described below.
(  ) button on the front panel of the product
for more than 5 seconds with no disc inserted.
✎ NOTE
 Some menu items may not appear on the
Properties screen. To see these items, press the ◄► to
move to the screen edge, and then press one
The Properties menu item lists three functions more time to reveal the items.
that display information about Smart Hub :  You can close the bar by highlighting the X on
the bottom right side, and then pressing the
Detail ENTER button.
Lists information about Smart Hub including
version number, the number of services installed, Move
memory usage, and the unique product ID.
The Move function lets you change the screen
position of a application. To use the Move
Terms of Service Agreement
function, follow these steps:
Displays the Terms of Service Agreement.
1. Press the YELLOW (C) button on your
remote.
2. Select a application, and then press the
ENTER button. A check appears above the
application.
3. Press the ▲▼◄► to select Move, and
then press the ENTER button. A position
change icon appears above the application.
4. Press the ▲▼◄► to move the icon. Press
the ENTER button when the icon is in the
position of your choice. The application
moves to its new location.

English 59
HT-D4500_ELS_1223.indd 59 2011-12-23 3:59:48
 Network Services
New Folder To Edit Items in a Folder
Select a folder, and then press the ENTER
The New Folder function lets you create and
button. The folder opens.
name new folders. Once you have created a
folder, you can move application into it. To use Press the YELLOW (C) button on your remote.
the New Folder function, follow these steps: The Edit buttons appear at the bottom of the
screen.
1. Press the YELLOW (C) button on your
remote. These buttons work the same as the Edit Mode
menu buttons on the main screen. For example,
2. Press the ▲▼◄► to move the cursor to to move a application back to the My
New Folder, and then press the ENTER Applications main screen:
button. The New Folder window and a
keypad appear. 1. Select the application.

3. Use the keypad to enter the name of the 2. Select Move to Folder, and then press the
folder, and then press the ENTER button. ENTER button. The Move to Folder window
The New Folder screen closes and the New appears.
Folder appears on the Smart Hub screen. 3. Select My Apps, and then press the ENTER
button. The Move to Folder window closes
Move to Folder and the application returns to the main My
Applications screen.
The Move to Folder function lets you move a
application to a folder. To use the Move to Folder Rename Folder
function, follow these steps:
1. Press the YELLOW (C) button on your The Rename Folder function lets you rename
remote. folders. To use the Rename Folder function,
follow these steps:
2. Select a application, and then press the
ENTER button. 1. Press the YELLOW (C) button on your
remote.
3. Press the ▲▼◄► to select Move to Folder,
and then press the ENTER button. The 2. Press the ▲▼◄► to select a folder, and
Move to Folder window opens. then press the ENTER button.

4. Press the ▲▼◄► to select a folder, and 3. Press the ▲▼◄► to select Rename a
then press the ENTER button. The Moved to Folder, and then press the ENTER button.
Folder message appears, and then closes. The Folder Rename window and a keyboard
The application has been moved to the appears.
folder. 4. Use the key board to enter a new name, and
then press the ENTER button. The Rename
To Access Application in a Folder window closes and the new name appears
1. Close the Edit Mode menu. below the folder.

2. In My Applications, press the ▲▼◄► to Lock

select a folder, and then press the ENTER
button. The folder opens. The Lock function lets you lock some application
in My Applications so they can not be opened
3. Select a application, and then press the
without entering the Parental Security Code.
ENTER button. The application’s application
or service starts.

60 English

HT-D4500_ELS_1223.indd 60 2011-12-23 3:59:48

 05
Network Services
To use the Lock function, follow these steps: 3. Press the ▲▼◄► to select Delete, and
then press the ENTER button. The
1. Press the YELLOW (C) button on your
message, "Do you want to delete the
remote.
selected item(s)?" appears.
2. Press the ▲▼◄► to select a application,
4. Select Yes, and then press the ENTER
and then press the ENTER button. If the
button. The application is deleted.
application can be locked, the Lock menu
item is enabled.
The Sort by Menu - GREEN (B)
3. Press the ▲▼◄► to select Lock, and then
press the ENTER button. The Security The functions in the Sort Menu let you sort the
window appears. application in My Applications by Default, Name,
Date, Frequency, Category, User Defined. If you
4. Enter your Parental Security Code (See page
manually change the position of a application, the
38). If you have not created a Parental
Sort Menu automatically highlights User Defined
Security Code, enter 0000.
when you start it.
5. Press the ENTER button. The Lock Service
To sort the application in My Applications, follow
window appears confirming the lock, and
these steps:
then closes. A lock symbol appears next to
the application. 1. Press the GREEN (B) button on your
remote.
Unlock 2. Press the ◄► to select a sorting method,
and then press the ENTER button. Smart
1. Press the YELLOW (C) button on your Hub sorts the application by the method you
remote. have chosen.
2. Press the ▲▼◄► to select a locked
application, and then press the ENTER
button. Samsung Apps
3. Press the ▲▼◄► to select Unlock, and Samsung Apps lets you download for pay or
then press the ENTER button. The Security free-of-charge applications and services to your
window appears. Blu-ray Home Cinema and view or use them on
4. Enter the Parental Security Code (See page your TV.
38). If you have not created a Parental These applications and services include videos,
Security Code, enter 0000. music, photos, games, news, sports, etc.
5. Press the ENTER button. The Lock Service Application for the new apps appear in My
Released window appears confirming the Applications.
lock has been release, and then closes. Additional applications and services are added
regularly.
Delete
The Delete function lets you delete application For Pay Apps
from My Applications. To use the Delete function,
To download for pay apps, you need to create a
follow these steps:
Samsung Account and add a credit card to the
1. Press the YELLOW (C) button on your account.
remote.
To create a Samsung account, please visit www.
2. Press the ▲▼◄► to select a application, samsung.com
and then press the ENTER button.
✎ NOTE
 This service may not provided in some
countries.

English 61
HT-D4500_ELS_1223.indd 61 2011-12-23 3:59:49
 Network Services
Accessing the Samsung Apps Screen Sort By Tabs
You can access the Sort By tabs on the top of
To access Samsung Apps, press the ▲▼◄►
the screen using the ▲▼◄► buttons. Each tab
buttons to navigate to the Samsung Apps area
displays the services or applications in the
on the Smart Hub main screen, and then press
category you chose, sorted by the criteria on the
the ENTER button. The Samsung Apps screen
tab (Recommended, Most Downloaded, Most
appears.
Recent, Name).
✎ NOTE You can also use the BLUE (D) button on your
 If this is the first time you are accessing this remote to access the Sort By tabs. Each time
screen, the terms of service window appears. you press the BLUE (D) button, you change the
Select Agree, and then press the ENTER display from one sort tab to the next.
button.
Samsung Apps by category
Using the Samsung Apps Screen
The following categories are available:
To use the Samsung Apps screen, follow these • What’s New? : Displays newly registered
steps: applications.
1. Press the ◄► buttons to move to the • Video : Displays various video media such as
category list on the left. movies, TV shows, and short length videos.
2. Press the ▲▼ to highlight a category. In a • Game : Displays various games such as sudoku
few seconds, the Samsung Apps screen and chess.
displays the applications in that category. • Sports : Displays various sports media services
The Sort tabs appear across the top. such as match information, images, and short
length videos.
3. Press the ► button to move to the displayed
applications or services. • Lifestyle : Includes various lifestyle media services
such as music, personal photo management
4. Press the ▲▼◄► buttons to select an
tools, and social networking such as Facebook
application or service, and then press the and Twitter.
ENTER button. The Application Details
• Information : Includes various information services
screen appears describing the service or
such as news, stocks, and weather.
application.
• Other : Includes other miscellaneous services.
5. Select Download Now, and then press the
ENTER button. If the application or service is
free, it downloads and runs. If not, and there
My Account
is a fee, follow the directions on the screen My Account gives you access to your Samsung
to complete the download. Apps order and download history, and to the My
✎ NOTE Apps Cash screen. You must have a Samsung
account to access this information.
 Some apps are free to download, but require
registration with the provider or a paid account
with the provider to use.
 Application for applications and services you
have downloaded from Samsung Apps appear
in My Applications.

62 English

HT-D4500_ELS_1223.indd 62 2011-12-23 3:59:49

 05
Network Services
Help BD-LIVE™
If you have questions about Samsung Apps, Once the product is connected to the network,
check Help first. If none of the tips apply, please you can enjoy various movie-related service
visit www.samsung.com. contents using a BD-LIVE compliant disc.
To use the Help function, follow these steps: 1. Attach a USB memory stick to the USB jack
1. Press the ▲▼◄► buttons to select Help, on the front of the product, and then check
and then press the ENTER button. its remaining memory. The memory device
2. Press the ◄► to enter Help after it appears. must have at least 1GB of free space to
accommodate the BD-LIVE services.
3. Press the ▲▼ to scroll the Help text.
2. Insert a Blu-ray disc that supports BD-LIVE.
4. Press the ◄ to exit Help.
3. Select an item from various BD-LIVE service
Using the coloured buttons on your contents provided by the disc manufacturer.
remote with Samsung Apps
✎ NOTE
• RED (A) (Login) : To log into your Smart TV  The way you use BD-LIVE and the provided
Account.
contents may differ, depending on the disc
• GREEN (B) (Thumbnail/List View) : To toggle manufacturer.
applications between Thumbnail and List view.
• BLUE (D) (Sort By) : To sort the applications in a
category by Recommended, Most Downloaded, Using the AllShare Function
Most Recent, or Name.
• Return : To return to the previous menu. AllShare lets you play music, video, and photo files
located in your PC or your DLNA compatible mobile
✎ NOTE phone or NAS on the product.
 The Internet contents services may be added To use AllShare with your product, you must
or deleted by providers without notice. connect the product to your network (See pages
23~24).
To use AllShare with your PC, you must install
For instructions to use Your Video or Search
Function, please visit www.samsung.com AllShare software on your PC.
If you have a DLNA compatible mobile phone or
NAS, you can use AllShare without any additional
software.
Using vTuner Function
You can download the PC software and get detailed
vTuner is the fuction of the listening a instructions for using AllShare from the Samsung.
radio. If you press the vTuner button, com web site.
you can move to vTuner application.

Press the vTuner button.

✎ NOTE
 You can use the vTuner Function after
download the vTuner application from
Samung Apps.

English 63
HT-D4500_ELS_1223.indd 63 2011-12-23 3:59:49
 Other information
Troubleshooting

Refer to the chart below when this product does not function properly. If the problem you are experiencing is
not listed below or if the instruction below does not help, turn off the product, disconnect the power cord
and contact the nearest authorized dealer or Samsung Electronics Service Centre.

Symptom Check/Remedy
I cannot eject the disc. • Is the power cord plugged securely into the outlet?
• Turn off the power and then turn it back on.
The iPod fails to connect. • Check the condition of the iPod connector.
• Keep the iPod S/W version up to date.
Playback does not start. • Check the region number of the BD/DVD.
BD/DVD discs purchased from abroad may not be playable.
• CD-ROMs and DVD-ROMs cannot be played on this product.
• Make sure that the rating level is correct.
Playback does not start • Are you using a deformed disc or a disc with scratches on the surface?
immediately when the • Wipe the disc clean.
Play/Pause button is pressed.
Sound is not produced. • No sound is heard during fast playback, slow playback, and step motion playback.
• Are the speakers connected properly? Is the speaker setup correctly customized?
• Is the disc severely damaged?
Sound can be heard only from a • On certain BD/DVD discs, sound is output from the front speakers only.
few speakers and not all 6. • Check if the speakers are connected properly.
• Adjust the volume.
• When listening to a CD, radio or TV, sound is output to the front speakers only.
Select "PRO LOGIC II" by pressing PL II (Dolby Pro Logic II) on the remote
control to use all six speakers.
Dolby Digital 5.1 CH Surround • Is there "Dolby Digital 5.1 CH" mark on the disc? Dolby Digital 5.1 CH Surround Sound is
Sound is not produced. produced only if the disc is recorded with 5.1 channel sound.
• Is the audio language correctly set to Dolby Digital 5.1-CH in the information
display?
The remote control does not work. • Is the remote control being operated within its operation range of angle and distance?
• Are the batteries drained?
• Have you selected the mode(TV/BD) functions of the remote control (TV or BD) correctly?
• Disc is rotating but no • Is the TV power on?
picture is produced. • Are the video cables connected properly?
• Picture quality is poor and • Is the disc dirty or damaged?
picture is shaking. • A poorly manufactured disc may not be playable.

Audio language and subtitles do • Audio language and subtitles will not work if the disc does not contain them.
not work.
Menu screen does not appear • Are you using a disc that does not contain menus?
even when the menu function is
selected.

64 English

HT-D4500_ELS_1223.indd 64 2011-12-23 3:59:49

 06
Other information
Symptom Check/Remedy
Aspect ratio cannot be changed. • You can play 16:9 BD/DVDs in 16:9 Wide mode, 4:3 Letter Box mode, or 4:3
Pan - Scan mode, but 4:3 BD/DVDs can be seen in 4:3 ratio only. Refer to the
Blu-ray Disc jacket and then select the appropriate function.

• The product is not working. • Press and hold the romote control's STOP (  ) button for 5 seconds in
(Example: The power goes out STANDBY mode.
or a strange noise is heard.) - Using the RESET function will erase all stored settings.
• The Product is not working Do not use this unless necessary.
normally.
The rating level password has • With no disc in the product, press and hold the product's STOP (  ) button for
been forgotten. longer than 5 seconds. INIT appears on the display and all settings will return
to the default values.
And then press the POWER button.
- Using the RESET function will erase all stored settings.
Do not use this unless necessary.

Can't receive radio broadcasts. • Is the antenna connected properly?

• If the antenna's input signal is weak, install an external FM antenna in an area
with good reception.

While listening to TV audio • If the OPEN/CLOSE ( ) button is pressed while listening to TV audio using the
through the Product, no sound is D. IN or AUX functions, the BD/DVD functions are turned on and the TV audio is
heard. muted.

"Not Available" appears on • The features or action cannot be completed at this time because:
screen. 1. The BD/DVD’s software restricts it.
2. The BD/DVD’s software doesn’t support the feature (e.g., angles)
3. The feature is not available at the moment.
4. You’ve requested a title or chapter number or search time that is out of range.
If the HDMI output is set to a • Press and hold the STOP (  ) button on front panel for more than 5 seconds
resolution your TV cannot support with no disc inserted. All settings will revert to the factory settings.
(for example, 1080p), you may not
see a picture on your TV.
No HDMI output. • Check the connection between the TV and the HDMI jack of the product.
• Check if your TV supports 576p/480p/720p/1080i/1080p HDMI input
resolution.
Abnormal HDMI output screen. • If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).

English 65
HT-D4500_ELS_1223.indd 65 2011-12-23 3:59:49
 Other information
Symptom Check/Remedy
PC Share Manager function
I can see folders shared through • Since it shows only files corresponding to the Image, Music, and Movie
the PC Share Manager, but I categories, files that do not correspond to these categories may not be
cannot see the files. displayed.
AllShare function
Video is played intermittently. • Check if the network is stable.
• Check if the network cable is properly connected and if the network is not
overloaded.
• Wireless connection between the server and the product is unstable.
Check the connection.
AllShare connection between TV • IP address under the same subnetwork should be unique, otherwise IP collision
and PC is unstable. can results in such a phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
BD-LIVE
I cannot connect to the BD-LIVE • Check whether the network connection is successful or not by using Network
server. Test menu.
• Check whether the USB memory device is connected with product or not.
• The memory device must have at least 1GB of free space to accommodate the
BD-LIVE service.
You can check the available size in BD Data Management. (See page 37)
• Please check whether the BD-LIVE Internet Connection menu is set to
Allow(All).
• If all above fails, contact the contents provider or update the latest firmware.
When using the BD-LIVE service, • The memory device must have at least 1GB of free space to accommodate the
an error occurs. BD-LIVE service.
You can check the available size in BD Data Management. (See page 37)

✎ NOTE
 When the factory default settings are restored, all the user data stored in the BD data will be deleted.

66 English

HT-D4500_ELS_1223.indd 66 2011-12-23 3:59:50

 06
Other information
Specifications

Weight 3.15 kg
Dimensions 430.0 (W) x 60.0 (H) x 279.1 (D) mm
General
Operating Temperature Range +5°C to +35°C
Operating Humidity Range 10 % to 75 %
Signal/noise ratio 55 dB
FM Tuner Usable sensitivity 12 dB
Total harmonic distortion 0.5 %
BD (Blu-ray Disc) Reading Speed : 9.834 m/sec
Reading Speed : 6.98 ~ 7.68 m/sec.
DVD (Digital Versatile Disc)
Approx. Play Time (Single Sided, Single Layer Disc) : 135 min.
Disc Reading Speed : 4.8 ~ 5.6 m/sec.
CD : 12cm (COMPACT DISC)
Maximum Play Time : 74 min.
Reading Speed : 4.8 ~ 5.6 m/sec.
CD : 8cm (COMPACT DISC)
Maximum Play Time : 20 min.
1 channel : 1.0 Vp-p (75 Ω load)
Composite Video
Blu-ray Disc : 576i/480i DVD : 576i/480i
Y : 1.0 Vp-p (75 Ω load)
Video Output Pr : 0.70 Vp-p (75 Ω load)
Component Video Pb : 0.70 Vp-p (75 Ω load)
BD : 576i/480i
DVD : 576p/480p, 576i/480i
1080p, 1080i, 720p, 576p/480p
Video/Audio HDMI
PCM multichannel audio, Bitstream audio, PCM audio
Front speaker output 167W x 2(3Ω)
Centre speaker output 167W(3Ω)
Surround speaker output 166W x 2(3Ω)
Subwoofer speaker output 167W(3Ω)
Amplifier Analogue input 20Hz~20kHz (±3dB)
Frequency response
Digital input 20Hz~40kHz (±-4dB)
S/N Ratio 70dB
Channel separation 60dB
Input sensitivity (AUX)500mV

English 67
HT-D4500_ELS_1223.indd 67 2011-12-23 3:59:50
 Other information
HT-D4500
5.1ch speaker system
Speaker system
Front Surround Centre Subwoofer
Impedance 3Ω 3Ω 3Ω 3Ω
Frequency range 140Hz~20kHz 140Hz~20kHz 140Hz~20kHz 40Hz ~ 160Hz
Output sound pressure level 86dB/W/M 86dB/W/M 86dB/W/M 88dB/W/M
Rated input 167W 166W 167W 167W
Speaker
Maximum input 334W 332W 334W 334W
Front : 90 x 139 x 70 mm
Surround : 77 x 107 x 70 mm
Dimensions (W x H x D)
Centre : 228 x 77 x 70 mm
Subwoofer : 168 x 350 x 285 mm
Front : 0.42 kg, Surround : 0.33 kg
Weights
Centre : 0.48 kg, Subwoofer : 3.62 kg

HT-D4550
5.1ch speaker system
Speaker system
Front Surround Centre Subwoofer
Impedance 3Ω 3Ω 3Ω 3Ω
Frequency range 140Hz~20kHz 140Hz~20kHz 140Hz~20kHz 40Hz ~ 160Hz
Output sound pressure level 86dB/W/M 86dB/W/M 86dB/W/M 88dB/W/M
Rated input 167W 166W 167W 167W
Speaker
Maximum input 334W 332W 334W 334W
Front : 90 x 1200 x 119 mm
Surround : 90 x 1200 x 119 mm
Dimensions (W x H x D)
Centre : 360 x 74.5 x 68.5 mm
Subwoofer : 168 x 350 x 285 mm
Front : 3.69 kg, Surround : 3.69 kg
Weights
Centre : 0.96 kg, Subwoofer : 3.60 kg
*: Nominal specification
- Samsung Electronics Co., Ltd reserves the right to change the specifications without notice.
- Weight and dimensions are approximate.
- Design and specifications are subject to change without prior notice.
- For the power supply and Power Consumption, refer to the label attached to the product.

68 English

HT-D4500_ELS_1223.indd 68 2011-12-23 3:59:50

 Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG
customer care centre.

Area Contact Centre  Web Site Area Contact Centre  Web Site
` North America Serbia
0700 Samsung (0700 726
www.samsung.com
Canada 1-800-SAMSUNG (726-7864) www.samsung.com 7864)
Mexico 01-800-SAMSUNG (726-7864) www.samsung.com Slovakia 0800-SAMSUNG (726-7864) www.samsung.com
U.S.A 1-800-SAMSUNG (726-7864) www.samsung.com Spain 902-1-SAMSUNG (902 172 678) www.samsung.com
` Latin America Sweden 0771 726 7864 (SAMSUNG) www.samsung.com
Argentine 0800-333-3733 www.samsung.com www.samsung.com/ch
0848-SAMSUNG (7267864,
Switzerland www.samsung.com/
Brazil 0800-124-421 / 4004-0000 www.samsung.com CHF 0.08/min)
ch_fr/(French)
Chile 800-SAMSUNG (726-7864) www.samsung.com
U.K 0330 SAMSUNG (7267864) www.samsung.com
Colombia 01-8000112112 www.samsung.com
Eire 0818 717100 www.samsung.com
Costa Rica 0-800-507-7267 www.samsung.com
Lithuania 8-800-77777 www.samsung.com
Dominica 1-800-751-2676 www.samsung.com
Latvia 8000-7267 www.samsung.com
Ecuador 1-800-10-7267 www.samsung.com
Estonia 800-7267 www.samsung.com
El Salvador 800-6225 www.samsung.com
` CIS
Guatemala 1-800-299-0013 www.samsung.com
Russia 8-800-555-55-55 www.samsung.com
Honduras 800-7919267 www.samsung.com
Georgia 8-800-555-555 -
Jamaica 1-800-234-7267 www.samsung.com
Armenia 0-800-05-555 -
Nicaragua 00-1800-5077267 www.samsung.com
Azerbaijan 088-55-55-555 -
Panama 800-7267 www.samsung.com
8-10-800-500-55-500
Peru 0-800-777-08 www.samsung.com Kazakhstan www.samsung.com
(GSM: 7799)
Puerto Rico 1-800-682-3180 www.samsung.com Uzbekistan 8-10-800-500-55-500 www.samsung.com
Trinidad & Kyrgyzstan 00-800-500-55-500 www.samsung.com
1-800-SAMSUNG (726-7864) www.samsung.com
Tobago
Tadjikistan 8-10-800-500-55-500 www.samsung.com
Venezuela 0-800-100-5303 www.samsung.com
www.samsung.ua
` Europe Ukraine 0-800-502-000 www.samsung.com/
Albania 42 27 5755 - ua_ru
0810 - SAMSUNG (7267864, Belarus 810-800-500-55-500 -
Austria www.samsung.com
€ 0.07/min) Moldova 00-800-500-55-500 -
www.samsung.com/ ` Asia Pacific
be (Dutch)
Belgium 02-201-24-18 Australia 1300 362 603 www.samsung.com
www.samsung.com/
be_fr (French) New Zealand 0800 SAMSUNG (0800 726 786) www.samsung.com
Bosnia 05 133 1999 - China 400-810-5858 / 010-6475 1880 www.samsung.com
Bulgaria 07001 33 11 www.samsung.com www.samsung.com/hk
Croatia 062 SAMSUNG (062 726 7864) www.samsung.com Hong Kong (852) 3698 4698 www.samsung.com/
hk_en/
800-SAMSUNG (800-726786)
3030 8282 / 1800 110011 /
Samsung Zrt., česká organizační India www.samsung.com
Czech www.samsung.com 1800 3000 8282 / 1800 266 8282
složka, Oasis Florenc, Soko-
lovská394/17, 180 00, Praha 8 0800-112-8888 /
Indonesia www.samsung.com
021-5699-7777
Denmark 70 70 19 70 www.samsung.com
Japan 0120-327-527 www.samsung.com
Finland 030 - 6227 515 www.samsung.com
Malaysia 1800-88-9999 www.samsung.com
France 01 48 63 00 00 www.samsung.com
1-800-10-SAMSUNG(726-7864) /
01805 - SAMSUNG (726-7864 1-800-3-SAMSUNG(726-7864) /
Germany www.samsung.com Philippines www.samsung.com
€ 0,14/Min) 1-800-8-SAMSUNG(726-7864) /
Hungary 06-80-SAMSUNG (726-7864) www.samsung.com 02-5805777
Italia 800-SAMSUNG (726-7864) www.samsung.com Singapore 1800-SAMSUNG (726-7864) www.samsung.com
Kosovo +381 0113216899 - Thailand 1800-29-3232 / 02-689-3232 www.samsung.com
Luxemburg 261 03 710 www.samsung.com Taiwan 0800-329-999 www.samsung.com
Macedonia 023 207 777 - Vietnam 1 800 588 889 www.samsung.com
Montenegro 020 405 888 - ` Middle East
0900-SAMSUNG Bahrain 8000-4726 www.samsung.com
Netherlands www.samsung.com
(0900-7267864) (€ 0,10/Min) Egypt 08000-726786 www.samsung.com
Norway 815-56 480 www.samsung.com Jordan 800-22273 www.samsung.com
0 801 1SAMSUNG (172678) Morocco 080 100 2255 www.samsung.com
Poland www.samsung.com
/ 022-607-93-33 Oman 800-SAMSUNG (726-7864) www.samsung.com
Portugal 80820-SAMSUNG (726-7864) www.samsung.com Saudi Arabia 9200-21230 www.samsung.com
1. 08010 SAMSUNG (72678) - Turkey 444 77 11 www.samsung.com
doar din reţeaua Romtelecom,
Rumania tarif local www.samsung.com U.A.E 800-SAMSUNG (726-7864) www.samsung.com
2. 021.206.01.10 - din orice ` Africa
reţea, tarif normal Nigeria 0800-SAMSUNG (726-7864) www.samsung.com
South Africa 0860-SAMSUNG (726-7864 ) www.samsung.com

HT-D4500_ELS_1223.indd 69 2011-12-23 3:59:50

 Correct disposal of batteries in this product
(Applicable in the European Union and other European countries with separate battery return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this product should not
be disposed of with other household waste at the end of their working life. Where marked, the chemical
symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference
levels in EC Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm
to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of
waste and recycle them through your local, free battery return system.

Correct Disposal of This Product (Waste Electrical & Electronic

Equipment)
(Applicable in the European Union and other European countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g.
charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life. To
prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these
items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office,
for details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract.
This product and its electronic accessories should not be mixed with other commercial wastes for disposal.

HT-D4500_ELS_1223.indd 70 2011-12-23 3:59:50