PARTS LIST

ITEM QTY PART NO. PART DESCRIPTION LENGTH UNIT WT. NET WT.
1 3 X-RM3HD WELDMENT FOR 3-SIDED HEAVY DUTY RING MOUNT 84.42 253.25
2 12 G58R-48 5/8" X 48" THREADED ROD (HDG.) 4.43 53.19
2 12 G58R-24 5/8" X 24" THREADED ROD (HDG.) 2.22 26.60
3 24 A58FW 5/8" HDG A325 FLATWASHER 0.03 0.82
4 24 G58LW 5/8" HDG LOCKWASHER 0.03 0.63
5 24 A58NUT 5/8'' HDG A325 HEX NUT 0.13 3.12
TOTAL WT. # 337.60

12" TO 45"
DIA. POLE

5 X2

4 X2

3 X2

TOLERANCE NOTES DESCRIPTION

Locations:
New York, NY
TOLERANCES ON DIMENSIONS, UNLESS OTHERWISE NOTED ARE: Engineering Atlanta, GA
HEAVY DUTY TRI-BRACKET RING MOUNT Support Team: Los Angeles, CA
SAWED, SHEARED AND GAS CUT EDGES (± 0.030")
12" T0 45" DIAMETER POLE 1-888-753-7446 Plymouth, IN
DRILLED AND GAS CUT HOLES (± 0.030") - NO CONING OF HOLES Salem, OR
LASER CUT EDGES AND HOLES (± 0.010") - NO CONING OF HOLES valmont Dallas, TX
BENDS ARE ± 1/2 DEGREE
ALL OTHER MACHINING (± 0.030") CPD NO. DRAWN BY ENG. APPROVAL PART NO.

1 OF 3
A ADDED INSTALLATION INFO CEK 10/20/2023 ALL OTHER ASSEMBLY (± 0.060") CEK 6/5/2017 RM3-HD

PAGE
REV DESCRIPTION OF REVISIONS CPD BY DATE PROPRIETARY NOTE: CLASS SUB DRAWING USAGE CHECKED BY DWG. NO.
THE DATA AND TECHNIQUES CONTAINED IN THIS DRAWING ARE PROPRIETARY INFORMATION OF VALMONT
REVISION HISTORY INDUSTRIES AND CONSIDERED A TRADE SECRET. ANY USE OR DISCLOSURE WITHOUT THE CONSENT OF
VALMONT INDUSTRIES IS STRICTLY PROHIBITED.
81 02 CUSTOMER BMC 6/27/2017 RM3-HD
 "X"
12" TO 45"
O.D. POLE

NOTE:
ENSURE EQUAL DISTANCE
BETWEEN BRACKETS "X"
AND AT 120° APART

120°

120°

120°

"X" "X"

18"
(ENSURE VERTICAL ALIGNMENT)

TOLERANCE NOTES DESCRIPTION

Locations:
New York, NY
TOLERANCES ON DIMENSIONS, UNLESS OTHERWISE NOTED ARE: Engineering Atlanta, GA
HEAVY DUTY TRI-BRACKET RING MOUNT Support Team: Los Angeles, CA
SAWED, SHEARED AND GAS CUT EDGES (± 0.030")
12" T0 45" DIAMETER POLE 1-888-753-7446 Plymouth, IN
DRILLED AND GAS CUT HOLES (± 0.030") - NO CONING OF HOLES Salem, OR
LASER CUT EDGES AND HOLES (± 0.010") - NO CONING OF HOLES valmont Dallas, TX
BENDS ARE ± 1/2 DEGREE
ALL OTHER MACHINING (± 0.030") CPD NO. DRAWN BY ENG. APPROVAL PART NO.

2 OF 3
A ADDED INSTALLATION INFO CEK 10/20/2023 ALL OTHER ASSEMBLY (± 0.060") CEK 6/5/2017 RM3-HD

PAGE
REV DESCRIPTION OF REVISIONS CPD BY DATE PROPRIETARY NOTE: CLASS SUB DRAWING USAGE CHECKED BY DWG. NO.
THE DATA AND TECHNIQUES CONTAINED IN THIS DRAWING ARE PROPRIETARY INFORMATION OF VALMONT
REVISION HISTORY INDUSTRIES AND CONSIDERED A TRADE SECRET. ANY USE OR DISCLOSURE WITHOUT THE CONSENT OF
VALMONT INDUSTRIES IS STRICTLY PROHIBITED.
81 02 CUSTOMER BMC 6/27/2017 RM3-HD
 INSTALL ORDER

P1à
P3à

P4à
P2à

INITIAL TIGHTENING

P1à
P2à

P3à
P4à

FINAL TIGHTENING

P4à
P3à

P2à
P1à

TOLERANCE NOTES DESCRIPTION

Locations:
New York, NY
TOLERANCES ON DIMENSIONS, UNLESS OTHERWISE NOTED ARE: Engineering Atlanta, GA
HEAVY DUTY TRI-BRACKET RING MOUNT Support Team: Los Angeles, CA
SAWED, SHEARED AND GAS CUT EDGES (± 0.030")
12" T0 45" DIAMETER POLE 1-888-753-7446 Plymouth, IN
DRILLED AND GAS CUT HOLES (± 0.030") - NO CONING OF HOLES Salem, OR
LASER CUT EDGES AND HOLES (± 0.010") - NO CONING OF HOLES valmont Dallas, TX
BENDS ARE ± 1/2 DEGREE
ALL OTHER MACHINING (± 0.030") CPD NO. DRAWN BY ENG. APPROVAL PART NO.

3 OF 3
A ADDED INSTALLATION INFO CEK 10/20/2023 ALL OTHER ASSEMBLY (± 0.060") CEK 6/5/2017 RM3-HD

PAGE
REV DESCRIPTION OF REVISIONS CPD BY DATE PROPRIETARY NOTE: CLASS SUB DRAWING USAGE CHECKED BY DWG. NO.
THE DATA AND TECHNIQUES CONTAINED IN THIS DRAWING ARE PROPRIETARY INFORMATION OF VALMONT
REVISION HISTORY INDUSTRIES AND CONSIDERED A TRADE SECRET. ANY USE OR DISCLOSURE WITHOUT THE CONSENT OF
VALMONT INDUSTRIES IS STRICTLY PROHIBITED.
81 02 CUSTOMER BMC 6/27/2017 RM3-HD