Scribd
Upload
16 views6 pages

RWall

RWR TRWW

Uploaded by

mayasprojects2020
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
16 views6 pages

RWall

RWR TRWW

Uploaded by

mayasprojects2020
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Design Results

Concrete Wall
__________________________________________________________________________________________________________________________

GENERAL INFORMATION:

Global status : OK

Design code : ACI 318-05

Geometry:
Total height : 3000.00 [mm]
Total length : 5000.00 [mm]
Base support type : Continuous
Wall bottom restraint : Fixed
Column bottom restraint : Fixed
Rigidity elements : None

Materials:
Material : C 3-40
Steel tension strength (Fy) : 275.789 [N/mm2]
Concrete compressive strength (fc) : 20.6842 [N/mm2]
Steel elasticity modulus (Es) : 199947 [N/mm2]
Concrete modulus of elasticity (E) : 21525.5 [N/mm2]
Concrete unit weight : 23.5343 [KN/m3]

Number of stories: 5

Story Story height Wall thickness


[mm] [mm]
---------------------------------------------------------------------------------------------------------------------
1 500.00 200.00
2 500.00 200.00
3 500.00 200.00
4 500.00 200.00
5 500.00 200.00
---------------------------------------------------------------------------------------------------------------------

Load conditions:

ID Comb. Category Description


--------------------------------------------------------------------------------------------------------------------------
DL No DL Dead Load
id2 No DL Dead Load 2
D1 Yes DL+id2
S1 Yes DL+id2
--------------------------------------------------------------------------------------------------------------------------

BEARING WALL DESIGN:

Status : OK
Geometry:

Segment X Coordinate Y Coordinate Width Height


[mm] [mm] [mm] [mm]
-------------------------------------------------------------------------------------------------------------------
1 0.00 0.00 5000.00 500.00
2 0.00 500.00 5000.00 500.00
3 0.00 1000.00 5000.00 500.00
4 0.00 1500.00 5000.00 500.00
5 0.00 2000.00 5000.00 500.00
6 0.00 2500.00 5000.00 500.00
-------------------------------------------------------------------------------------------------------------------

Vertical reinforcement:

Reinforcement layers : 2

Segment Bars Spacing Ld


[mm] [mm]
--------------------------------------------------------------------------------------------
1 11-10mm 450.00 304.80
2 11-10mm 450.00 304.80
3 11-10mm 450.00 304.80
4 11-10mm 450.00 304.80
5 11-10mm 450.00 304.80
6 11-10mm 450.00 304.80
--------------------------------------------------------------------------------------------

Intermediate results for axial-bending

Segment Condition c d
[mm] [mm]
--------------------------------------------------------------------------------------------
1 D1 (Bottom) 9.61 165.00
2 D1 (Top) 8.84 165.00
3 D1 (Bottom) 8.61 165.00
4 D1 (Bottom) 8.19 165.00
5 D1 (Top) 7.70 165.00
6 D1 (Top) 7.45 165.00
--------------------------------------------------------------------------------------------
Combined axial flexure

Segment Condition Pu Mu *Mn Mu/*Mn


[KN] [KN*m] [KN*m]
-------------------------------------------------------------------------------------------------------------------------------------------------------
1 D1 (Bottom) 217.69 -21.06 61.69 0.34
2 D1 (Top) 165.60 6.56 56.84 0.12
3 D1 (Bottom) 150.31 5.83 55.41 0.11
4 D1 (Bottom) 121.83 4.13 52.76 0.08
5 D1 (Top) 89.24 6.37 49.72 0.13
6 D1 (Top) 72.25 13.86 48.14 0.29
-------------------------------------------------------------------------------------------------------------------------------------------------------

Interaction diagrams, P vs. M:

Axial compression

Segment Condition Pu *Pn Pu/*Pn


[KN] [KN]
-------------------------------------------------------------------------------------------------------------------------------------
1 D1 (Bottom) 217.69 9126.61 0.02
2 D1 (Bottom) 183.84 9126.61 0.02
3 D1 (Bottom) 150.31 9126.61 0.02
4 D1 (Bottom) 121.83 9126.61 0.01
5 D1 (Bottom) 98.17 9126.61 0.01
6 D1 (Bottom) 84.75 9126.61 0.01
-------------------------------------------------------------------------------------------------------------------------------------

Axial tension

Segment Condition Pu *Pn Pu/*Pn


[KN] [KN]
-------------------------------------------------------------------------------------------------------------------------------------
1 D1 (Top) 0.00 428.66 0.00
2 D1 (Top) 0.00 428.66 0.00
3 D1 (Top) 0.00 428.66 0.00
4 D1 (Top) 0.00 428.66 0.00
5 D1 (Top) 0.00 428.66 0.00
6 D1 (Top) 0.00 428.66 0.00
-------------------------------------------------------------------------------------------------------------------------------------

Shear

Segment Condition Vu *Vn Vu/*Vn


[KN] [KN]
-------------------------------------------------------------------------------------------------------------------------------------
1 D1 (Bottom) 2.286 467.329 0.00
2 D1 (Bottom) 0.448 467.329 0.00
3 D1 (Top) 0.069 467.329 0.00
4 D1 (Max) 0.054 467.329 0.00
5 D1 (Max) 0.194 467.329 0.00
6 D1 (Top) 0.508 467.329 0.00
-------------------------------------------------------------------------------------------------------------------------------------

SHEAR WALL DESIGN:

Status : OK

Geometry:

Segment X Coordinate Y Coordinate Width Height


[mm] [mm] [mm] [mm]
-------------------------------------------------------------------------------------------------------------------
1 0.00 0.00 5000.00 500.00
2 0.00 500.00 5000.00 500.00
3 0.00 1000.00 5000.00 500.00
4 0.00 1500.00 5000.00 500.00
5 0.00 2000.00 5000.00 500.00
6 0.00 2500.00 5000.00 500.00
-------------------------------------------------------------------------------------------------------------------

Reinforcement:

Reinforcement layers : 2

Vertical reinforcement Horizontal reinforcement


Segment Bars Spacing Ld Bars Spacing Ld
[mm] [mm] [mm] [mm]
--------------------------------------------------------------------------------------------------------------------------------------------
1 11-10mm 450.00 304.80 1-10mm 450.00 379.75
2 11-10mm 450.00 304.80 1-10mm 450.00 379.75
3 11-10mm 450.00 304.80 1-10mm 450.00 379.75
4 11-10mm 450.00 304.80 1-10mm 450.00 379.75
5 11-10mm 450.00 304.80 1-10mm 450.00 379.75
6 11-10mm 450.00 304.80 1-10mm 450.00 379.75
--------------------------------------------------------------------------------------------------------------------------------------------

Intermediate results for axial-bending

Segment Condition c d
[mm] [mm]
--------------------------------------------------------------------------------------------
1 D1 (Bottom) 226.72 4000.00
2 D1 (Top) 207.35 4000.00
3 D1 (Max) 201.54 4000.00
4 D1 (Max) 190.98 4000.00
5 D1 (Top) 178.97 4000.00
6 D1 (Top) 172.65 4000.00
--------------------------------------------------------------------------------------------

Combined axial flexure

Segment Condition Pu Mu *Mn Mu/*Mn


[KN] [KN*m] [KN*m]
-------------------------------------------------------------------------------------------------------------------------------------------------------
1 D1 (Bottom) 217.69 0.88 1542.41 0.00
2 D1 (Top) 165.60 -0.47 1421.99 0.00
3 D1 (Max) 149.97 -0.68 1385.85 0.00
4 D1 (Max) 121.55 -1.31 1320.15 0.00
5 D1 (Top) 89.24 3.90 1245.43 0.00
6 D1 (Top) 72.25 20.66 1206.15 0.02
-------------------------------------------------------------------------------------------------------------------------------------------------------

Interaction diagrams, P vs. M:

Axial compression

Segment Condition Pu *Pn Pu/*Pn


[KN] [KN]
-------------------------------------------------------------------------------------------------------------------------------------
1 D1 (Bottom) 217.69 9126.61 0.02
2 D1 (Bottom) 183.84 9126.61 0.02
3 D1 (Bottom) 150.31 9126.61 0.02
4 D1 (Bottom) 121.83 9126.61 0.01
5 D1 (Bottom) 98.17 9126.61 0.01
6 D1 (Bottom) 84.75 9126.61 0.01
-------------------------------------------------------------------------------------------------------------------------------------

Axial tension

Segment Condition Pu *Pn Pu/*Pn


[KN] [KN]
-------------------------------------------------------------------------------------------------------------------------------------
1 D1 (Top) 0.00 428.66 0.00
2 D1 (Top) 0.00 428.66 0.00
3 D1 (Top) 0.00 428.66 0.00
4 D1 (Top) 0.00 428.66 0.00
5 D1 (Top) 0.00 428.66 0.00
6 D1 (Top) 0.00 428.66 0.00
-------------------------------------------------------------------------------------------------------------------------------------

Shear

Segment Condition Vu *Vn Vu/*Vn


[KN] [KN]
-------------------------------------------------------------------------------------------------------------------------------------
1 D1 (Max) 0.642 1066.162 0.00
2 D1 (Max) 0.395 1061.275 0.00
3 D1 (Top) 0.428 1056.653 0.00
4 D1 (Top) 0.617 1052.758 0.00
5 D1 (Top) 1.396 1049.771 0.00
6 D1 (Max) 5.631 1047.283 0.01
-------------------------------------------------------------------------------------------------------------------------------------

Notes:

* Pu = Axial load
* Pn = Nominal axial load
* Mu = Section moment
* Mn = Maximum nominal moment
* Vu = Design shear force
* Vn = Nominal shear force
* ld = Embedment length
* As = Effective cross sectional area of reinforcement

You might also like