CHETTINAD COLLEGE OF ENGINEERING & TECHNOLOGY

B.Tech – APR./ MAY. 2024

Regulation ARTIFICIAL INTELLIGENCE AND
2021 Semester : IV Department :
: DATA SCIENCE
MA3391&Probability and Statistics
UNIT– V: Statistical Quality Control
S.No PART A - 2 Marks CO K
What is Statistical quality control?
1. C210.3 K2-U
Write down advantage of SQC.
2. C210.3 K1-R
What is meant by chance variation?
3. C210.3 K2-U
What is meant by Assignable variation? C210.3
4. K1-R

5. Name the types of Control Chart C210.3 K2-U

6. Define product control C210.3 K1-R
7. Define process control C210.3 K1-R
8. What is control Chart? C210.3 K3-AR
9. Write down uses of Mean Chart. C210.3 K2-U
10. Write down types of Acceptance sampling plan C210.3 K4-Az
11. Define OC Curve C210.3 K4-Az
12. Write down types of Causes variation C210.3 K4-Az
13. Write the formula for np chart. C210.3 K1-R
14. What is meant by AQL and LTPD C210.3 K2-U
15. What is the formula for c chart and p chart C210.3 K1-R
Define Acceptance Sampling. C210.3
16. K6-C

17. Explain producers Risk and Consumer Risk. C210.3 K1-R

18. Define Tolerance limits. C210.3 K2-U
Define one-sided Tolerance limits C210.3
19. K4-Az
Define Two-Sided Tolerance limits. C210.3
20. K3-A

1
 PART B

1. What do you understand by SQC. Discuss its utility and limitations? K2-U
C210.3

The following data give the weight of an automobile part. Five samples of four
items each were taken on a random sample basis (at an interval of 1 hour each).
Draw the mean Control Chart and find out if the production process is in
control.
Sample Weight of the parts in ounces
2. C210.3 K5-E
1 10 12 10 12
2 10 12 13 13
3 10 10 9 11
4 11 10 9 14
5 12 12 12 12
You are given the value of sample means (X̅ ) and Range for 10 samples of size
5 each. Draw mean chart and comment on the state of control of the process.
3. Sample No 1 2 3 4 5 6 7 8 9 10 C210.3 K3-A
( X̅ ) 43 49 37 44 45 37 51 46 43 47
R 5 6 5 7 7 4 8 6 4 6
For a sampling plan N = 1,200, n = 64 and c = 1, determine the probability of
acceptance of the following lots; (i) 0.5%defective, (ii) 0.8%defective, (iii)
4. C210.3 K2-U
1%defective, (iv) 2%defective, (v) 4% defective, (vi) 10%defective. Also draw
and OC curve.
10 samples each of size 50 were inspected and the number of defectives in the
5. inspection were: 2,1,1,2,3,5,5,1,2,3. Draw the appropriate control chart for K3-A
C210.3
defectives.
A machine is set to deliver packets of a given weight, 10 samples of size 5 each C210.3
were recorded. Below are given the relevant data:
Sample 1 2 3 4 5 6 7 8 9 10
No
6. ( X̅ ) 15 17 15 18 17 14 18 15 17 16 K1-R
R 7 7 4 9 8 7 12 4 11 5
Calculate the values of the Central Line and the control limits for the mean
chart and the range chart and then comment on the state of control. (Conversion
factors for n=5 are A2=0.58 D3=0,D4=2.115)
7. Explain in detail the R-Chart clearly? C210.3 K1-R
The following data show the values of sample mean X̅ and the range. R for the C210.3
samples of size 5 each. Calculate the values for central line and control limits
for mean-chart and range chart and determine whether the process is in control.
Sample 1 2 3 4 5 6 7 8 9 10
8. No K4-Az
( X̅ ) 11. 11. 10.8 11.6 11 9.6 10.4 9.6 10.6 10
2 8
R 7 4 8 5 7 4 8 4 7 9
(Conversion factors for n=5 are A2=0.577 D3=0,D4=2.115)
C210.3
9. Explain in detail the X̅ Chart clearly? K1-R

2
 15 tape-recorders were examined for quality control test. The number of
defects in each tape-recorder is recorded below. Draw the appropriate control C210.3
chart and comment on the state of control.

10. Unit 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 K2-U

No (i)
No of 2 4 3 1 1 2 5 3 6 7 3 1 4 2 1
defects
(c)
Construct X̅ chart for following data.
Sample No 1 2 3 4 5 6 7 8 C210.3

11. 32 28 39 50 42 50 44 22 K4-Az
Observation 36 32 52 42 45 29 52 35
42 40 28 31 34 21 35 44
Also determine whether the process is in control.
From the information given below construct an appropriate control chart.
Sample 1 2 3 4 5 6 7 8 9
No.(each of
100) C210.3
12. K1-R
No. of 12 7 9 8 10 6 7 11 8
defectives
State your conclusions. Write all the steps in the construction of the above chart
including formula for UCL and LCL.
Construct a Control Chart for fraction defectives (p-Chart) for following data. C210.3
Sample No. 1 2 3 4 5 6 7 8 9 10
13. Sample 90 65 85 70 80 80 70 95 90 75 K1-R
Size
No of 9 7 3 2 9 5 3 9 6 7
defectives
14. Explain Control Limits for the sample mean 𝑋̅ and sample range R. C210.3 K4-Az
15. An inspection of 10 samples of size 400 each from 10 lots reveled the following C210.3
number of defective units17,15,14,26,9,4,19,12,9,6 K1-R