[ 0.

000000] Booting Linux on physical CPU 0x0

[ 0.000000] Linux version 4.9.253-tegra (buildbrain@mobile-u64-5434-d8000) (gcc
version 7.3.1 20180425 [linaro-7.3-2018.05 revision
d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT
Sat Feb 19 08:59:22 PST 2022
[ 0.000000] Boot CPU: AArch64 Processor [411fd071]
[ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 32,
[ 0.000000] OF: fdt: - 80000000 , 7ee00000
[ 0.000000] OF: fdt: - 100000000 , 7f200000
[ 0.000000] Found tegra_fbmem: 00800000@92ca9000
[ 0.000000] earlycon: uart8250 at MMIO32 0x0000000070006000 (options '')
[ 0.000000] bootconsole [uart8250] enabled
[ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id
nvidia,vpr-carveout
[ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id
nvidia,iram-carveout
[ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id
nvidia,ramoops
[ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000
[ 0.000000] On node 0 totalpages: 1039872
[ 0.000000] DMA zone: 8192 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 519168 pages, LIFO batch:31
[ 0.000000] Normal zone: 8136 pages used for memmap
[ 0.000000] Normal zone: 520704 pages, LIFO batch:31
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] percpu: Embedded 24 pages/cpu s57624 r8192 d32488 u98304
[ 0.000000] pcpu-alloc: s57624 r8192 d32488 u98304 alloc=24*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] CPU features: enabling workaround for ARM erratum 832075
[ 0.000000] Speculative Store Bypass Disable mitigation not required
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages:
1023544
[ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M
section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0
emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1
debug_uartport=lsport,4 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4
usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1075
core_edp_ma=4000 gpt tegra_fbmem=0x800000@0x92ca9000 is_hdmi_initialised=1 quiet
earlycon=uart8250,mmio32,0x70006000 loglevel=0 vt.global_cursor_default=0
root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 console=ttyS0 fbcon=map:0
net.ifnames=0
[ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
[ 0.000000] log_buf_len min size: 32768 bytes
[ 0.000000] log_buf_len: 131072 bytes
[ 0.000000] early log buf free: 29880(91%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Memory: 3560284K/4159488K available (15358K kernel code, 2956K
rwdata, 6696K rodata, 8640K init, 612K bss, 124068K reserved, 475136K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f80000 ( 15360 KB)
[ 0.000000] .rodata : 0xffffff8008f80000 - 0xffffff8009610000 ( 6720 KB)
[ 0.000000] .init : 0xffffff8009610000 - 0xffffff8009e80000 ( 8640 KB)
[ 0.000000] .data : 0xffffff8009e80000 - 0xffffff800a163008 ( 2957 KB)
[ 0.000000] .bss : 0xffffff800a163008 - 0xffffff800a1fc0b4 ( 613 KB)
[ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB
maximum)
[ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB
actual)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to
/interrupt-controller
[ 0.000000] t210 clock and reset probe
[ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] clk_cbus_recalc_rate: no gbus parent
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz
(phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every
4398046511078ns
[ 0.001707] Console: colour dummy device 80x25
[ 0.001729] kmemleak: Kernel memory leak detector disabled
[ 0.001747] Calibrating delay loop (skipped), value calculated using timer
frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.001761] pid_max: default: 32768 minimum: 301
[ 0.002210] Security Framework initialized
[ 0.002429] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.002438] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.003555] ftrace: allocating 47098 entries in 184 pages
[ 0.171750] sched-energy: CPU device node has no sched-energy-costs
[ 0.171783] ASID allocator initialised with 65536 entries
[ 0.207823] tegra-id: chipid=22117.
[ 0.207835] tegra-id: opt_subrevision=0.
[ 0.207852] Tegra Speedo/IDDQ fuse revision 4
[ 0.207858] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2
[ 0.207863] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0
[ 0.207868] Tegra: CPU Speedo Value 2023, SoC Speedo Value 1918, GPU Speedo
Value 2034
[ 0.207873] Tegra: CPU IDDQ Value 1600, SoC IDDQ Value 1848, GPU IDDQ Value 2200
[ 0.207893] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0
[ 0.207906] DTS File Name:
../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-
dts/tegra210-p3448-0002-p3449-0000-b00.dts
[ 0.207913] DTB Build time: May 13 2022 12:18:57
[ 0.257083] CPU1: Booted secondary processor [411fd071]
[ 0.288987] CPU2: Booted secondary processor [411fd071]
[ 0.320971] CPU3: Booted secondary processor [411fd071]
[ 0.321056] Brought up 4 CPUs
[ 0.321062] SMP: Total of 4 processors activated.
[ 0.321068] CPU features: detected feature: 32-bit EL0 Support
[ 0.321328] CPU: All CPU(s) started at EL2
[ 0.321345] alternatives: patching kernel code
[ 0.329448] devtmpfs: initialized
[ 0.367023] Initilizing CustomIPI irq domain
[ 0.367330] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.367348] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.378091] pinctrl core: initialized pinctrl subsystem
[ 0.378687] OS set in device tree is not L4T.
[ 0.379098] regulator-dummy: no parameters
[ 0.379361] Initializing plugin-manager
[ 0.379520] Plugin module not found
[ 0.379718] node /plugin-manager/fragement@0 match with board >=3448-0002-100
[ 0.380239] node /plugin-manager/fragment@1 match with board >=3448-0002-101
[ 0.380679] node /plugin-manager/fragment@3 match with board >=3448-0002-100
[ 0.381444] node /plugin-manager/fragement@7 match with odm-data enable-pmic-wdt
[ 0.381662] node /plugin-manager/fragement@8 match with odm-data enable-pmic-wdt
[ 0.382272] node /plugin-manager/fragement@13 match with board >=3448-0002-300
[ 0.385839] NET: Registered protocol family 16
[ 0.387061] pstore: using zlib compression
[ 0.387104] console [pstore-1] enabled
[ 0.387108] pstore: Registered ramoops as persistent store backend
[ 0.387114] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
[ 0.401102] cpuidle: using governor menu
[ 0.404242] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
[ 0.406027] vdso: 2 pages (1 code @ ffffff8008f87000, 1 data @ ffffff8009e84000)
[ 0.406049] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.409538] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic
allocations
[ 0.411911] Serial: AMBA PL011 UART driver
[ 0.412420] tegra_powergate_init: DONE
[ 0.412435] DTS File Name:
../arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-
dts/tegra210-p3448-0002-p3449-0000-b00.dts
[ 0.412442] DTB Build time: May 13 2022 12:18:57
[ 0.414395] Tegra reboot handler registered.
[ 0.418936] iommu: Adding device tegra-carveouts to group 0
[ 0.419076] platform tegra-carveouts: domain=ffffffc0f94333d8 allocates
as[0]=ffffffc0f941c0a8
[ 0.419439] iommu: Adding device smmu_test to group 1
[ 0.419483] platform smmu_test: domain=ffffffc0f9433618 allocates
as[0]=ffffffc0f941c110
[ 0.420277] mc: mapped MMIO address: 0xffffff8008041000 -> 0x70019000
[ 0.420336] mc: mapped MMIO address: 0xffffff8008067000 -> 0x7001c000
[ 0.420391] mc: mapped MMIO address: 0xffffff800807b000 -> 0x7001d000
[ 0.420399] nv-tegra-mc 70019000.mc: No mssnvlink node
[ 0.420423] mc-err: mcerr ops are set to t21x
[ 0.431131] iommu: Adding device 70090000.xusb to group 2
[ 0.431424] iommu: Adding device 70006000.serial to group 3
[ 0.431501] platform 70006000.serial: domain=ffffffc0f94cd558 allocates
as[0]=ffffffc0f941c178
[ 0.431944] iommu: Adding device 70006040.serial to group 4
[ 0.432220] iommu: Adding device 70006200.serial to group 5
[ 0.432447] iommu: Adding device sound to group 6
[ 0.432498] platform sound: domain=ffffffc0f94cda98 allocates
as[0]=ffffffc0f941c1e0
[ 0.433100] iommu: Adding device 7000d400.spi to group 7
[ 0.433375] iommu: Adding device 7000d600.spi to group 8
[ 0.433712] iommu: Adding device 50000000.host1x to group 9
[ 0.433989] iommu: Adding device 54080000.vi to group 10
[ 0.434395] iommu: Adding device 54600000.isp to group 11
[ 0.434664] iommu: Adding device 54680000.isp to group 12
[ 0.434972] iommu: Adding device tegradc.0 to group 13
[ 0.435022] platform tegradc.0: domain=ffffffc0f94d7858 allocates
as[0]=ffffffc0f941c248
[ 0.439324] platform tegradc.0: IOVA linear map 0x0000000092ca9000(800000)
[ 0.439715] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000)
[ 0.440058] iommu: Adding device tegradc.1 to group 14
[ 0.440110] platform tegradc.1: domain=ffffffc0f94d7a98 allocates
as[0]=ffffffc0f941c2b0
[ 0.444262] platform tegradc.1: IOVA linear map 0x0000000092ca9000(800000)
[ 0.444651] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000)
[ 0.444909] iommu: Adding device 54340000.vic to group 15
[ 0.445138] iommu: Adding device 544c0000.nvenc to group 16
[ 0.445336] iommu: Adding device 54500000.tsec to group 17
[ 0.445536] iommu: Adding device 54100000.tsecb to group 18
[ 0.445743] iommu: Adding device 54480000.nvdec to group 19
[ 0.445961] iommu: Adding device 54380000.nvjpg to group 20
[ 0.447007] iommu: Adding device 546c0000.i2c to group 21
[ 0.447335] iommu: Adding device 57000000.gpu to group 22
[ 0.447386] platform 57000000.gpu: domain=ffffffc0f94e7a98 allocates
as[0]=ffffffc0f941c318
[ 0.447425] platform 57000000.gpu: domain=ffffffc0f94e7a98 allocates
as[1]=ffffffc0f941c380
[ 0.447459] platform 57000000.gpu: domain=ffffffc0f94e7a98 allocates
as[2]=ffffffc0f941c3e8
[ 0.447503] platform 57000000.gpu: domain=ffffffc0f94e7a98 allocates
as[3]=ffffffc0f941c450
[ 0.448389] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency
thermal reset disabled.
[ 0.448400] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
[ 0.448413] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET
[ 0.448418] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
[ 0.448422] tegra-pmc: ### PMC reset status reg: 0x0
[ 0.501162] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
[ 0.501172] tegra-pmc: Clear bootloader IO dpd settings
[ 0.501193] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
[ 0.501261] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset
commands
[ 0.501568] iommu: Adding device 70012000.se to group 23
[ 0.502159] iommu: Adding device 1003000.pcie to group 24
[ 0.502211] platform 1003000.pcie: domain=ffffffc0f957a258 allocates
as[0]=ffffffc0f941c4b8
[ 0.502632] iommu: Adding device 7000c000.i2c to group 25
[ 0.502942] iommu: Adding device 7000c400.i2c to group 26
[ 0.503199] iommu: Adding device 7000c500.i2c to group 27
[ 0.503452] iommu: Adding device 7000c700.i2c to group 28
[ 0.503700] iommu: Adding device 7000d000.i2c to group 29
[ 0.503952] iommu: Adding device 7000d100.i2c to group 30
[ 0.504224] iommu: Adding device sdhci-tegra.3 to group 31
[ 0.504271] platform sdhci-tegra.3: domain=ffffffc0f957ad98 allocates
as[0]=ffffffc0f941c520
[ 0.505161] iommu: Adding device 700d0000.xudc to group 32
[ 0.508435] vdd-ac-bat: 5000 mV
[ 0.508839] vdd-5v0-sys: 5000 mV
[ 0.509539] vdd-5v0-hdmi: 5000 mV
[ 0.509965] vdd-5v0-hdmi: supplied by vdd-5v0-sys
[ 0.510221] vdd-1v8-sys: 1800 mV
[ 0.510588] vdd-fan: 5000 mV
[ 0.510843] vdd-fan: supplied by vdd-5v0-sys
[ 0.511081] vdd-usb-vbus: 5000 mV
[ 0.511292] vdd-usb-vbus: supplied by vdd-5v0-sys
[ 0.511628] vdd-usb-vbus2: 5000 mV
[ 0.542115] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.545885] gpio gpiochip0: gpio-line-names specifies 240 line names but there
are 256 lines on the chip
[ 0.547031] GPIO line 6 (system-suspend-gpio) hogged as output/high
[ 0.547059] GPIO line 151 (camera-control-output-low) hogged as output/low
[ 0.547080] GPIO line 152 (camera-control-output-low) hogged as output/low
[ 0.547489] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0
(tegra-gpio)
[ 0.555650] eventlib_kernel: keventlib is initialized, test id: 0
[ 0.555992] SCSI subsystem initialized
[ 0.556228] libata version 3.00 loaded.
[ 0.556545] usbcore: registered new interface driver usbfs
[ 0.556601] usbcore: registered new interface driver hub
[ 0.556645] usbcore: registered new device driver usb
[ 0.560726] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
[ 0.565153] vdd-core: 600 <--> 1162 mV at 1125 mV
[ 0.565842] random: fast init done
[ 0.566185] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV
[ 0.568997] vdd-ddr-1v1: 1150 mV
[ 0.572994] vdd-pre-reg-1v35: 1350 mV
[ 0.576989] vdd-1v8: 1800 mV
[ 0.580991] avdd-sys-1v2: 1200 mV
[ 0.584987] vdd-pex-1v0: 1050 mV
[ 0.585612] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV
[ 0.586137] max77620-ldo3: at 3100 mV
[ 0.588995] vdd-rtc: 850 <--> 1100 mV at 1000 mV
[ 0.589566] max77620-ldo5: at 3100 mV
[ 0.592994] vddio-sdmmc3-ap: 1800 <--> 3300 mV at 2800 mV
[ 0.596993] avdd-1v05-pll: 1050 mV
[ 0.600989] avdd-io-hdmi-dp: 1050 mV
[ 0.603590] GPIO line 505 (spmic-default-output-high) hogged as output/high
[ 0.603873] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1
(max77620-gpio)
[ 0.604226] max77620 4-003c: max77620 probe successful
[ 0.607043] media: Linux media interface: v0.10
[ 0.607115] Linux video capture interface: v2.00
[ 0.608037] pps_core: LinuxPPS API ver. 1 registered
[ 0.608041] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<[email protected]>
[ 0.608059] PTP clock support registered
[ 0.611121] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS
table
[ 0.611970] Advanced Linux Sound Architecture Driver Initialized.
[ 0.612686] Bluetooth: Core ver 2.22
[ 0.612737] NET: Registered protocol family 31
[ 0.612741] Bluetooth: HCI device and connection manager initialized
[ 0.612756] Bluetooth: HCI socket layer initialized
[ 0.612765] Bluetooth: L2CAP socket layer initialized
[ 0.612815] Bluetooth: SCO socket layer initialized
[ 0.614524] tegra210_dvfs: no clock found for sdmmc2_ddr
[ 0.614538] tegra210_dvfs: no clock found for sdmmc4_ddr
[ 0.614591] tegra210_dvfs: no clock found for sdmmc1_ddr
[ 0.614606] tegra210_dvfs: no clock found for sdmmc3_ddr
[ 0.618127] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
[ 0.619316] vdd-3v3-sys: 3300 mV
[ 0.619704] vdd-3v3-sys: supplied by vdd-5v0-sys
[ 0.619753] vdd-1v8-sys: supplied by vdd-3v3-sys
[ 0.621070] vdd-usb-vbus2: supplied by vdd-3v3-sys
[ 0.621529] vdd-3v3-sd: 3300 mV
[ 0.621918] vdd-3v3-sd: supplied by vdd-3v3-sys
[ 0.622681] avdd-io-edp-1v05: 1050 mV
[ 0.623038] avdd-io-edp-1v05: supplied by avdd-1v05-pll
[ 0.623167] vdd-usb-hub-en: 5000 mV
[ 0.623512] vdd-usb-hub-en: supplied by vdd-1v8-sys
[ 0.624650] camchar: rtcpu character device driver loaded
[ 0.625371] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1
[ 0.626669] clocksource: Switched to clocksource arch_sys_counter
[ 0.666653] VFS: Disk quotas dquot_6.6.0
[ 0.666859] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.667356] nvmap_heap_init: nvmap_heap_init: created heap block cache
[ 0.667801] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr,
base=0x00000000d7000000, size=0x19000000
[ 0.667818] dma-vpr: heap size is not multiple of cma_chunk_size heap_info-
>num_chunks (13) rem_chunk_size(0x1000000)
[ 0.668039] cma: enabled page replacement for spfn=d7000, epfn=f0000
[ 0.668048] dma_declare_coherent_resizable_cma_memory:373: resizable cma
heap=vpr create successful
[ 0.668059] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-
carveout
[ 0.668092] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare
0x0000000040001000,258048
[ 0.668098] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-
carveout
[ 0.668111] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
[ 0.668119] nvmap_page_pool_init: Total RAM pages: 1008855
[ 0.668124] nvmap_page_pool_init: nvmap page pool size: 126106 pages (492 MB)
[ 0.668204] nvmap_background_zero_thread: PP zeroing thread starting.
[ 0.668659] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
[ 0.669495] misc nvmap: created heap vpr base 0x00000000d7000000 size
(409600KiB)
[ 0.677767] thermal thermal_zone0: Registering thermal zone thermal_zone0 for
type AO-therm
[ 0.678203] thermal thermal_zone1: Registering thermal zone thermal_zone1 for
type CPU-therm
[ 0.678563] thermal thermal_zone2: Registering thermal zone thermal_zone2 for
type GPU-therm
[ 0.678901] thermal thermal_zone3: Registering thermal zone thermal_zone3 for
type PLL-therm
[ 0.679100] thermal thermal_zone4: Registering thermal zone thermal_zone4 for
type PMIC-Die
[ 0.679383] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
[ 0.679387] pre_t19x_iso_plat_init(): max_iso_bw=11520000KB
[ 0.679820] NET: Registered protocol family 2
[ 0.679946] IP idents hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.682132] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.682344] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.682913] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.683061] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.683141] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.683570] NET: Registered protocol family 1
[ 0.684227] RPC: Registered named UNIX socket transport module.
[ 0.684232] RPC: Registered udp transport module.
[ 0.684236] RPC: Registered tcp transport module.
[ 0.684240] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.684256] PCI: CLS 0 bytes, default 64
[ 0.684473] Trying to unpack rootfs image as initramfs...
[ 0.982861] Freeing initrd memory: 6988K
[ 0.992785] host1x 50000000.host1x: initialized
[ 0.994524] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters
available
[ 0.997881] audit: initializing netlink subsys (disabled)
[ 0.997948] audit: type=2000 audit(0.847:1): initialized
[ 0.998693] workingset: timestamp_bits=46 max_order=20 bucket_order=0
[ 1.008680] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.010132] ntfs: driver 2.1.32 [Flags: R/W].
[ 1.010959] 9p: Installing v9fs 9p2000 file system support
[ 1.014168] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
[ 1.014287] io scheduler noop registered
[ 1.014581] io scheduler cfq registered (default)
[ 1.017309] gic 702f9000.agic: GIC IRQ controller registered
[ 1.020293] iommu: Adding device 702ef000.adsp to group 33
[ 1.029690] iommu: Adding device aconnect@702c0000:adsp_audio to group 34
[ 1.029869] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
[ 1.030500] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 =
0x8a28413
[ 1.030509] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 =
0x4
[ 1.032174] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane =
usb2-0, function = xusb
[ 1.032284] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane =
usb2-1, function = xusb
[ 1.032383] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane =
usb2-2, function = xusb
[ 1.032579] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane =
pcie-0, function = pcie-x1
[ 1.032669] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane =
pcie-1, function = pcie-x4
[ 1.032757] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane =
pcie-2, function = pcie-x4
[ 1.032841] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane =
pcie-3, function = pcie-x4
[ 1.032933] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane =
pcie-4, function = pcie-x4
[ 1.033016] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane =
pcie-5, function = xusb
[ 1.033099] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane =
pcie-6, function = xusb
[ 1.039245] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops
[ 1.040906] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
[ 1.042868] tegra-pcie 1003000.pcie: 4x1, 1x1 configuration
[ 1.044150] tegra-pcie 1003000.pcie: PCIE: Enable power rails
[ 1.044507] tegra-pcie 1003000.pcie: probing port 0, using 4 lanes
[ 1.045737] tegra_camera_platform tegra-camera-platform:
tegra_camera_probe:camera_platform_driver probe
[ 1.045952] misc tegra_camera_ctrl: tegra_camera_isomgr_register
isp_iso_bw=1500000, vi_iso_bw=1500000, max_bw=1500000
[ 1.046186] Adding domain tsec-pd to PM domain host1x-pd
[ 1.048397] tegra-pcie 1003000.pcie: probing port 1, using 1 lanes
[ 1.049309] tsec 54500000.tsec: initialized
[ 1.050903] tsec 54100000.tsecb: initialized
[ 1.051661] Adding domain nvdec-pd to PM domain host1x-pd
[ 1.055028] nvdec 54480000.nvdec: initialized
[ 1.056090] Adding domain vic03-pd to PM domain host1x-pd
[ 1.056262] Adding domain msenc-pd to PM domain host1x-pd
[ 1.056428] Adding domain nvjpg-pd to PM domain host1x-pd
[ 1.060404] falcon 54340000.vic: initialized
[ 1.061632] falcon 544c0000.nvenc: initialized
[ 1.062963] falcon 54380000.nvjpg: initialized
[ 1.067396] tegra_cec 70015000.tegra_cec: dt=1 start=0x70015000 end=0x70015FFF
irq=96
[ 1.067442] tegra_cec 70015000.tegra_cec: Enable clock result: 0.
[ 1.067479] tegra_cec 70015000.tegra_cec: tegra_cec_init started
[ 1.067634] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1
[ 1.067728] display board info: id 0x0, fab 0x0
[ 1.067766] tegra_cec 70015000.tegra_cec: cec_add_sysfs ret=0
[ 1.067772] tegra_cec 70015000.tegra_cec: probed
[ 1.067785] generic_infoframe_type: 0x87
[ 1.067937] tegradc tegradc.0: DT parsed successfully
[ 1.067984] tegradc tegradc.0: Display dc.ffffff800abc0000 registered with id=0
[ 1.068493] tegradc tegradc.0: Bootloader disp_param detected. Detected mode:
640x480 (on 0x0mm) pclk=25173906
[ 1.075754] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32
channels
[ 1.076475] tegradc tegradc.0: probed
[ 1.082318] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 22
channels
[ 1.083824] tegra-fuse-burn 7000f800.efuse:efuse-burn: shutdown limit check
disabled
[ 1.083834] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver
initialized
[ 1.084267] kfuse 7000fc00.kfuse: initialized
[ 1.085741] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply
not available
[ 1.086771] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
[ 1.088165] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
[ 1.088182] vdd-cpu: 708 <--> 1322 mV at 708 mV
[ 1.088680] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator
registration passed
[ 1.090310] vdd-gpu: applied init 1000000uV constraint
[ 1.090320] vdd-gpu: 708 <--> 1323 mV at 997 mV
[ 1.090781] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator
registration passed
[ 1.095837] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.095974] No Device Node present for smmu client: serial8250 !!
[ 1.095989] platform serial8250: No iommus property found in DT node, got swgids
from fixup(101004000)
[ 1.096058] iommu: Adding device serial8250 to group 35
[ 1.099157] console [ttyS0] disabled
[ 1.099257] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud =
25500000) is a Tegra
[ 1.099299] console [ttyS0] enabled
[ 1.099304] bootconsole [uart8250] disabled
[ 1.100254] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud =
0) is a TEGRA_UART
[ 1.100540] serial-tegra 70006200.serial: RX in PIO mode
[ 1.100626] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud =
0) is a TEGRA_UART
[ 1.101606] [drm] Initialized
[ 1.103677] Console: switching to colour frame buffer device 80x30
[ 1.103717] tegradc tegradc.0: fb registered
[ 1.110931] tegradc tegradc.0: DC initialized, skipping tegra_dc_program_mode.
[ 1.110982] tegradc tegradc.0: hdmi: tmds rate:25174K prod-
setting:prod_c_hdmi_0m_54m
[ 1.111503] tegradc tegradc.0: hdmi: get RGB quant from REG programmed by BL.
[ 1.111515] tegradc tegradc.0: hdmi: BL set VIC 0
[ 1.111520] tegradc tegradc.0: hdmi: get YCC quant from REG programmed by BL.
[ 1.113033] brd: module loaded
[ 1.118352] loop: module loaded
[ 1.118436] tegra_profiler: version: 1.145, samples/io: 49/28
[ 1.118554] tegra_profiler: auth: init
[ 1.119959] THERMAL EST: found 2 subdevs
[ 1.119969] THERMAL EST num_resources: 0
[ 1.119976] [THERMAL EST subdev 0]
[ 1.119985] [THERMAL EST subdev 1]
[ 1.120431] thermal thermal_zone5: Registering thermal zone thermal_zone5 for
type thermal-fan-est
[ 1.120435] THERMAL EST: thz register success.
[ 1.120597] THERMAL EST: end of probe, return err: 0
[ 1.121930] sd: No Scsi addr parsed to reserve index
[ 1.121968] hisi_sas: driver version v1.6
[ 1.125029] extcon-disp-state extcon:disp-state: cable 47 state 1
[ 1.125038] Extcon AUX1(HDMI) enable
[ 1.126016] tegradc tegradc.1: disp1 connected to head1->/host1x/sor
[ 1.126098] tegradc tegradc.1: No lt-data, using default setting
[ 1.126128] tegradc tegradc.1: No hpd-gpio in DT
[ 1.126161] tegradc tegradc.1: DT parsed successfully
[ 1.126215] tegradc tegradc.1: Display dc.ffffff800d540000 registered with id=1
[ 1.128052] tegradc tegradc.1: dpd enable lookup fail:-19
[ 1.130183] libphy: Fixed MDIO Bus: probed
[ 1.131428] tun: Universal TUN/TAP device driver, 1.6
[ 1.131436] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 1.132647] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.132653] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.132709] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[ 1.132713] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.132727] tegradc tegradc.1: probed
[ 1.132766] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version
2.4.0-k
[ 1.132770] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.132836] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version
4.4.0-k
[ 1.132839] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[ 1.133246] tegradc tegradc.1: fb registered
[ 1.134131] PPP generic driver version 2.4.2
[ 1.134324] PPP BSD Compression module registered
[ 1.134329] PPP Deflate Compression module registered
[ 1.134368] PPP MPPE Compression module registered
[ 1.134375] NET: Registered protocol family 24
[ 1.134454] usbcore: registered new interface driver r8152
[ 1.134499] usbcore: registered new interface driver asix
[ 1.134545] usbcore: registered new interface driver ax88179_178a
[ 1.134585] usbcore: registered new interface driver cdc_ether
[ 1.134629] usbcore: registered new interface driver net1080
[ 1.134713] usbcore: registered new interface driver cdc_subset
[ 1.134753] usbcore: registered new interface driver zaurus
[ 1.134805] usbcore: registered new interface driver cdc_ncm
[ 1.135155] VFIO - User Level meta-driver version: 0.3
[ 1.136579] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.136600] ehci-pci: EHCI PCI platform driver
[ 1.136649] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.136663] ohci-pci: OHCI PCI platform driver
[ 1.136709] ohci-platform: OHCI generic platform driver
[ 1.136765] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
[ 1.136773] hpd: switching from state 7 (Takeover from bootloader) to state 0
(Reset)
[ 1.136783] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
[ 1.136801] tegradc tegradc.1: blank - powerdown
[ 1.136823] extcon-disp-state extcon:disp-state: cable 44 state 0 already set.
[ 1.136828] Extcon DP: HPD disabled
[ 1.136833] hpd: hpd_switch 0
[ 1.136838] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
[ 1.136848] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
[ 1.136856] hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
[ 1.139730] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
[ 1.140339] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
[ 1.141554] tegra-xusb 70090000.xusb: extcon 0: ffffffc0fa5d3800 id
[ 1.144014] usbcore: registered new interface driver uas
[ 1.144081] usbcore: registered new interface driver usb-storage
[ 1.144214] usbcore: registered new interface driver usbserial
[ 1.144455] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12
UTC, Version: 50.26 release
[ 1.144509] tegra-xusb 70090000.xusb: xHCI Host Controller
[ 1.144535] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus
number 1
[ 1.145296] tegra-xusb 70090000.xusb: hcc params 0x0184f525 hci version 0x100
quirks 0x00050010
[ 1.145359] tegra-xusb 70090000.xusb: irq 61, io mem 0x70090000
[ 1.145564] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.145571] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.145576] usb usb1: Product: xHCI Host Controller
[ 1.145581] usb usb1: Manufacturer: Linux 4.9.253-tegra xhci-hcd
[ 1.145586] usb usb1: SerialNumber: 70090000.xusb
[ 1.146252] hub 1-0:1.0: USB hub found
[ 1.146296] hub 1-0:1.0: 5 ports detected
[ 1.147201] tegra-xusb 70090000.xusb: xHCI Host Controller
[ 1.147218] tegra-xusb 70090000.xusb: new USB bus registered, assigned bus
number 2
[ 1.147354] usb usb2: We don't know the algorithms for LPM for this host,
disabling LPM.
[ 1.147462] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.147469] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.147474] usb usb2: Product: xHCI Host Controller
[ 1.147479] usb usb2: Manufacturer: Linux 4.9.253-tegra xhci-hcd
[ 1.147484] usb usb2: SerialNumber: 70090000.xusb
[ 1.148052] hub 2-0:1.0: USB hub found
[ 1.148092] hub 2-0:1.0: 4 ports detected
[ 1.150381] tegra-xusb 70090000.xusb: Upgrade port 0 to USB3.0
[ 1.150391] tegra-xusb 70090000.xusb: Upgrade port 1 to USB3.0
[ 1.150606] tegra-xudc-new 700d0000.xudc: device count: 1
[ 1.152328] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
[ 1.152341] tegra-xudc-new 700d0000.xudc: vbus state: 1
[ 1.152358] tegra-xudc-new 700d0000.xudc: device mode on: 0
[ 1.152371] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0
[ 1.152400] tegra-xudc-new 700d0000.xudc: active: 0 => 1
[ 1.153107] mousedev: PS/2 mouse device common for all mice
[ 1.153214] usbcore: registered new interface driver xpad
[ 1.170284] tegradc tegradc.0: nominal-pclk:25174825 parent:25173906 div:1.0
pclk:25173906 24923052~27440532
[ 1.242488] tegradc tegradc.0: blank - powerdown
[ 1.274744] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2
[ 1.274977] usb usb2: usb_suspend_both: status 0
[ 1.283265] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
[ 1.285439] rtc rtc1: alarm rtc device
[ 1.285450] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
[ 1.285467] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
[ 1.285837] i2c /dev entries driver
[ 1.287371] i2c i2c-6: Added multiplexed i2c bus 7
[ 1.287763] i2c i2c-6: Added multiplexed i2c bus 8
[ 1.287768] i2c-mux-gpio cam_i2cmux: 2 port mux on Tegra I2C adapter adapter
[ 1.288346] imx219 7-0010: tegracam sensor driver:imx219_v2.0.6
[ 1.291269] extcon-disp-state extcon:disp-state: cable 47 state 0
[ 1.291271] Extcon AUX1(HDMI) disable
[ 1.312027] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
[ 1.312141] imx219 7-0010: imx219_board_setup: error during i2c read probe (-
121)
[ 1.312295] imx219 7-0010: board setup failed
[ 1.312390] imx219: probe of 7-0010 failed with error -121
[ 1.313265] imx219 8-0010: tegracam sensor driver:imx219_v2.0.6
[ 1.327554] tegradc tegradc.0: unblank
[ 1.336572] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
[ 1.336657] imx219 8-0010: imx219_board_setup: error during i2c read probe (-
121)
[ 1.336744] imx219 8-0010: board setup failed
[ 1.336806] imx219: probe of 8-0010 failed with error -121
[ 1.338472] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
[ 1.341468] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
[ 1.341474] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
[ 1.341960] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 1.341977] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu
reaches 102500 mC
[ 1.341987] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu
reaches 100500 mC
[ 1.342125] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 1.342135] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu
reaches 103000 mC
[ 1.342142] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu
reaches 101000 mC
[ 1.342299] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 1.342309] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll
reaches 127000 mC
[ 1.342315] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot
temperature
[ 1.342501] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
[ 1.343195] tegradc tegradc.0: nominal-pclk:108000000 parent:108000000 div:1.0
pclk:108000000 106920000~117720000
[ 1.343295] tegradc tegradc.0: hdmi: tmds rate:108000K prod-
setting:prod_c_hdmi_75m_150m
[ 1.343455] tegra_aotag tegra-aotag: Registering sensor 0
[ 1.343518] tegra_aotag tegra-aotag: Invalid temp readout
[ 1.343546] tegra_aotag tegra-aotag: Invalid temp readout
[ 1.343562] tegra_aotag tegra-aotag: Bound to TZ : ID 0
[ 1.343571] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
[ 1.344531] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 1.344550] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device'
registered
[ 1.344754] tegra_aotag tegra-aotag: Invalid temp readout
[ 1.344788] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device'
registered
[ 1.345233] parse_throttle_dt_data: Num cap clks = 6
[ 1.345238] parse_throttle_dt_data: clk=cclk_g type=2
[ 1.345252] parse_throttle_dt_data: clk=gpu type=4
[ 1.345281] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
[ 1.345302] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
[ 1.345325] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
[ 1.345328] parse_throttle_dt_data: clk=emc type=3
[ 1.345882] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 1.346004] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 1.346171] tegra_throttle_probe: probe successful. #cdevs=4
[ 1.347118] FAN dev name: pwm-fan
[ 1.347201] FAN:gpio request success.
[ 1.347265] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
[ 1.347595] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
[ 1.347794] pwm_fan_driver pwm-fan: fan tach request irq success
[ 1.347804] pwm_fan_driver pwm-fan: tach period: 1000
[ 1.347921] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40,
state:2
[ 1.347926] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2,
state:2
[ 1.347931] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1,
state:2
[ 1.347935] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1,
state:2
[ 1.347939] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1,
state:3
[ 1.347943] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1,
state:3
[ 1.347947] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1,
state:3
[ 1.347951] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1,
state:4
[ 1.347955] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1,
state:4
[ 1.347959] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1,
state:4
[ 1.350971] device-mapper: uevent: version 1.0.3
[ 1.351463] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-
[email protected]
[ 1.356136] tegra210-cpufreq cpufreq: probe()...completed
[ 1.356864] sdhci: Secure Digital Host Controller Interface driver
[ 1.356865] sdhci: Copyright(c) Pierre Ossman
[ 1.356867] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.357252] sdhci-tegra sdhci-tegra.3: Client registration for eMC Successful
[ 1.363223] tegra-se 70012000.se: tegra_se_probe: complete
[ 1.363767] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.364864] usbcore: registered new interface driver usbhid
[ 1.364865] usbhid: USB HID core driver
[ 1.367166] tegra21x_actmon 6000c800.actmon: in actmon_register()...
[ 1.367330] tegra21x_actmon 6000c800.actmon: initialization Completed for the
device mc_all
[ 1.369298] nvpmodel: initialized successfully
[ 1.370351] usbcore: registered new interface driver snd-usb-audio
[ 1.370409] No Device Node present for smmu client: snd-soc-dummy !!
[ 1.370414] platform snd-soc-dummy: No iommus property found in DT node, got
swgids from fixup(101004000)
[ 1.370430] iommu: Adding device snd-soc-dummy to group 36
[ 1.376037] input: tegra-hda HDMI/DP,pcm=3 as
/devices/70030000.hda/sound/card0/input0
[ 1.378046] tegradc tegradc.0: sync windows ret = 247
[ 1.394293] OPE platform probe
[ 1.394371] OPE platform probe successful
[ 1.394630] OPE platform probe
[ 1.394728] OPE platform probe successful
[ 1.398696] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
64-bit with 64 bit addr
[ 1.400092] extcon-disp-state extcon:disp-state: cable 51 state 1
[ 1.400095] Extcon HDMI: HPD enabled
[ 1.400108] tegradc tegradc.0: hdmi: plugged
[ 1.420919] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
[ 1.421057] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
[ 1.421186] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
[ 1.421315] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
[ 1.421440] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
[ 1.421570] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
[ 1.421701] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
[ 1.421827] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
[ 1.421964] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
[ 1.422091] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
[ 1.434046] u32 classifier
[ 1.434049] Actions configured
[ 1.434122] Initializing XFRM netlink socket
[ 1.434860] NET: Registered protocol family 10
[ 1.435521] NET: Registered protocol family 17
[ 1.435532] NET: Registered protocol family 15
[ 1.435605] bridge: filtering via arp/ip/ip6tables is no longer available by
default. Update your scripts to load br_netfilter if you need this.
[ 1.435650] Bluetooth: RFCOMM socket layer initialized
[ 1.435660] Bluetooth: RFCOMM ver 1.11
[ 1.435673] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.435678] Bluetooth: HIDP socket layer initialized
[ 1.435695] 9pnet: Installing 9P2000 support
[ 1.435729] Key type dns_resolver registered
[ 1.436032] Registered cp15_barrier emulation handler
[ 1.436038] Registered setend emulation handler
[ 1.437131] registered taskstats version 1
[ 1.437672] Adding domain ve2-pd to PM domain host1x-pd
[ 1.437934] Adding domain ve-pd to PM domain host1x-pd
[ 1.440046] isp 54600000.isp: initialized
[ 1.441091] isp 54680000.isp: initialized
[ 1.451099] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[ 1.451469] mmcblk0: mmc0:0001 DG4016 14.7 GiB
[ 1.451527] last reset is due to power on reset
[ 1.451530] KERNEL: PMC reset status reg: 0x0
[ 1.451590] mmcblk0rpmb: mmc0:0001 DG4016 partition 3 4.00 MiB
[ 1.451594] BL: PMC reset status reg: 0x0
[ 1.451597] BL: PMIC poweroff Event Recorder: 0x40
[ 1.453082] clk_cbus_recalc_rate: no gbus parent
[ 1.453087] clk_cbus_round_rate: no gbus parent
[ 1.453089] clk_cbus_round_rate: no gbus parent
[ 1.453096] clk_cbus_recalc_rate: no gbus parent
[ 1.453196] clk_cbus_recalc_rate: no gbus parent
[ 1.453199] clk_cbus_round_rate: no gbus parent
[ 1.453201] clk_cbus_round_rate: no gbus parent
[ 1.453205] clk_cbus_recalc_rate: no gbus parent
[ 1.453903] tegra_dvfs: GPU-cap: registered
[ 1.453959] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV,
scaling enabled
[ 1.453962] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV,
scaling enabled
[ 1.453964] tegra dvfs: vdd-gpu: nominal 1068mV, offset 708000uV, step 10000uV,
scaling enabled
[ 1.454142] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
[ 1.455381] tegra_dvfs: vdd-gpu-vts: registered
[ 1.456184] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor
cooling device' registered
[ 1.456885] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling
device' registered
[ 1.457414] input: gpio-keys as /devices/gpio-keys/input/input1
[ 1.482618] tegra-pcie 1003000.pcie: link 0 down, retrying
[ 1.487437] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:04:46
UTC (946688686)
[ 1.488441] vi 54080000.vi: vi_probe: ++
[ 1.491937] vi 54080000.vi: initialized
[ 1.493957] vi 54080000.vi: subdev nvcsi--2 bound
[ 1.494058] vi 54080000.vi: subdev nvcsi--1 bound
[ 1.494277] mmcblk mmc0:0001: Card claimed for testing.
[ 1.494921] Disable partitions left on by BL
[ 1.494925] disb
[ 1.494968] bwmgr: missing cdev-type property
[ 1.495062] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 1.495069] DRAM derating cdev registered.
[ 1.496034] ALSA device list:
[ 1.496037] #0: tegra-hda at 0x70038000 irq 82
[ 1.496039] #1: tegra-snd-t210ref-mobile-rt565x
[ 1.499523] Freeing unused kernel memory: 8640K
[ 1.502745] usb 1-3: new high-speed USB device number 2 using tegra-xusb
[ 1.523493] usb 1-3: config 1 interface 0 altsetting 0 endpoint 0x84 has an
invalid bInterval 32, changing to 9
[ 1.523891] Root device found: mmcblk0p1
[ 1.525305] Found dev node: /dev/mmcblk0p1
[ 1.525655] usb 1-3: New USB device found, idVendor=05a9, idProduct=0107
[ 1.525660] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.525663] usb 1-3: Product: OVMed-B1-116 UVC1.0 FW-v1.3.5
[ 1.525667] usb 1-3: Manufacturer: OmniVision Technologies, Inc.
[ 1.664429] EXT4-fs (mmcblk0p1): recovery complete
[ 1.665399] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode.
Opts: (null)
[ 1.667367] Rootfs mounted over mmcblk0p1
[ 1.680116] Switching from initrd to actual rootfs
[ 1.761675] systemd[1]: System time before build time, advancing clock.
[ 1.777678] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.789022] cgroup: cgroup2: unknown option "nsdelegate"
[ 1.798938] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT
+SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL
+XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-
hierarchy=hybrid)
[ 1.799736] systemd[1]: Detected architecture arm64.
[ 1.822313] systemd[1]: Set hostname to <pex>.
[ 1.824727] systemd[1]: Hardware watchdog 'max77620-watchdog', version 0
[ 1.825168] systemd[1]: Set hardware watchdog to 16s.
[ 1.890726] tegra-pcie 1003000.pcie: link 0 down, retrying
[ 1.897619] systemd[1]: File /lib/systemd/system/systemd-journald.service:36
configures an IP firewall (IPAddressDeny=any), but the local system does not
support BPF/cgroup based firewalling.
[ 1.897628] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning
is only shown for the first loaded unit using IP firewalling.)
[ 2.002019] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.004188] systemd[1]: Created slice System Slice.
[ 2.004365] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.004575] systemd[1]: Listening on Journal Socket (/dev/log).
[ 2.004604] random: systemd: uninitialized urandom read (16 bytes read)
[ 2.005465] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 2.054331] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
[ 2.098699] tegra_cec 70015000.tegra_cec: physical address: 00:00.
[ 2.118380] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO]
GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
[ 2.163266] tegra_cec 70015000.tegra_cec: Sent <Text View On> res: -113.
[ 2.163272] tegra_cec 70015000.tegra_cec: tegra_cec_init Done.
[ 2.301507] tegra-pcie 1003000.pcie: link 0 down, retrying
[ 2.302705] tegra-pcie 1003000.pcie: link 0 down, ignoring
[ 2.364765] systemd-journald[1983]: Received request to flush runtime journal
from PID 1
[ 2.378102] systemd-journald[1983]: File
/var/log/journal/a3d9197b765643568af09eb2bd3e5ce7/system.journal corrupted or
uncleanly shut down, renaming and replacing.
[ 2.408123] tegra-pcie 1003000.pcie: PCI host bridge to bus 0000:00
[ 2.408128] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 2.408132] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
[ 2.408135] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
[ 2.408139] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.408159] pci 0000:00:02.0: [10de:0faf] type 01 class 0x060400
[ 2.408230] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.408370] iommu: Adding device 0000:00:02.0 to group 37
[ 2.408440] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]),
reconfiguring
[ 2.408545] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 2.408568] pci 0000:01:00.0: reg 0x10: [io 0x0000-0x00ff]
[ 2.408597] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x00000fff 64bit pref]
[ 2.408617] pci 0000:01:00.0: reg 0x20: [mem 0x00000000-0x00003fff 64bit pref]
[ 2.408748] pci 0000:01:00.0: supports D1 D2
[ 2.408751] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.408914] iommu: Adding device 0000:01:00.0 to group 38
[ 2.418723] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 2.418753] pci 0000:00:02.0: BAR 15: assigned [mem 0x20000000-0x200fffff 64bit
pref]
[ 2.418757] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 2.418764] pci 0000:01:00.0: BAR 4: assigned [mem 0x20000000-0x20003fff 64bit
pref]
[ 2.418781] pci 0000:01:00.0: BAR 2: assigned [mem 0x20004000-0x20004fff 64bit
pref]
[ 2.418797] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
[ 2.418804] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 2.418808] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
[ 2.418813] pci 0000:00:02.0: bridge window [mem 0x20000000-0x200fffff 64bit
pref]
[ 2.419064] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
[ 2.419068] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.419073] pcie_pme 0000:00:02.0:pcie001: service driver pcie_pme loaded
[ 2.419168] aer 0000:00:02.0:pcie002: service driver aer loaded
[ 2.419345] r8168 0000:01:00.0: enabling device (0000 -> 0003)
[ 2.419360] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
[ 2.440496] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid
ethernet address 00:00:00:00:00:00, trying device tree node
[ 2.440563] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid
ethernet address 48:b0:2d:8f:7e:47 from device tree
[ 2.441192] r8168: This product is covered by one or more of the following
patents: US6,570,884, US6,115,776, and US6,327,625.
[ 2.441209] r8168 Copyright (C) 2017 Realtek NIC software team
<[email protected]>
This program comes with ABSOLUTELY NO WARRANTY; for details, please
see <http://www.gnu.org/licenses/>.
This is free software, and you are welcome to redistribute it under
certain conditions; see <http://www.gnu.org/licenses/>.
[ 3.017256] using random self ethernet address
[ 3.055024] using random host ethernet address
[ 3.989498] Mass Storage Function, version: 2009/09/11
[ 3.989505] LUN: removable file: (no medium)
[ 4.008297] using random self ethernet address
[ 4.046145] using random host ethernet address
[ 4.071551] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.077124] eth0: 0xffffff800abbb000, 48:b0:2d:8f:7e:47, IRQ 406
[ 4.182580] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 4.182602] cpu-throttle-alert cooling device registered.
[ 4.186097] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 4.186117] gpu-throttle-alert cooling device registered.
[ 4.187666] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 4.187685] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 4.187701] hot-surface-alert cooling device registered.
[ 4.190068] random: crng init done
[ 4.215042] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.295777] uvcvideo: Found UVC 1.00 device OVMed-B1-116 UVC1.0 FW-v1.3.5
(05a9:0107)
[ 4.299418] uvcvideo 1-3:1.0: Entity type for entity Processing 5 was not
initialized!
[ 4.325857] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 4.388747] uvcvideo 1-3:1.0: Entity type for entity Selector 4 was not
initialized!
[ 4.485968] rndis0: HOST MAC ba:db:f5:ba:7c:90
[ 4.486432] rndis0: MAC ba:db:f5:ba:7c:91
[ 4.489281] usb0: HOST MAC ba:db:f5:ba:7c:92
[ 4.489309] usb0: MAC ba:db:f5:ba:7c:93
[ 4.489337] tegra-xudc-new 700d0000.xudc: ep 0 (type: 0, dir: out) enabled
[ 4.523434] l4tbr0: port 1(rndis0) entered blocking state
[ 4.523437] l4tbr0: port 1(rndis0) entered disabled state
[ 4.524963] device rndis0 entered promiscuous mode
[ 4.533374] IPv6: ADDRCONF(NETDEV_UP): rndis0: link is not ready
[ 4.541732] l4tbr0: port 2(usb0) entered blocking state
[ 4.541735] l4tbr0: port 2(usb0) entered disabled state
[ 4.542319] device usb0 entered promiscuous mode
[ 4.549800] IPv6: ADDRCONF(NETDEV_UP): usb0: link is not ready
[ 4.569468] uvcvideo 1-3:1.0: Entity type for entity Camera 1 was not
initialized!
[ 4.660702] input: OVMed-B1-116 UVC1.0 FW-v1.3.5 as
/devices/70090000.xusb/usb1/1-3/1-3:1.0/input/input2
[ 4.660951] usbcore: registered new interface driver uvcvideo
[ 4.660954] USB Video Class driver (1.1.1)
[ 4.813973] zram: Added device: zram0
[ 4.821089] zram: Added device: zram1
[ 4.824163] zram: Added device: zram2
[ 4.828429] zram: Added device: zram3
[ 4.845037] android_work: did not send uevent (0 0 (null))
[ 4.871583] zram0: detected capacity change from 0 to 518537216
[ 4.909753] android_work: sent uevent USB_STATE=CONNECTED
[ 4.972639] android_work: sent uevent USB_STATE=DISCONNECTED
[ 5.057805] android_work: sent uevent USB_STATE=CONNECTED
[ 5.061471] configfs-gadget gadget: high-speed config #1: c
[ 5.061502] tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled
[ 5.061518] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled
[ 5.061533] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled
[ 5.061635] tegra-xudc-new 700d0000.xudc: ep 9 (type: 3, dir: in) enabled
[ 5.061651] tegra-xudc-new 700d0000.xudc: ep 7 (type: 2, dir: in) enabled
[ 5.061666] tegra-xudc-new 700d0000.xudc: ep 4 (type: 2, dir: out) enabled
[ 5.061702] tegra-xudc-new 700d0000.xudc: ep 15 (type: 3, dir: in) enabled
[ 5.061721] tegra-xudc-new 700d0000.xudc: ep 11 (type: 2, dir: in) enabled
[ 5.061743] tegra-xudc-new 700d0000.xudc: ep 6 (type: 2, dir: out) enabled
[ 5.061783] IPv6: ADDRCONF(NETDEV_CHANGE): rndis0: link becomes ready
[ 5.062051] android_work: sent uevent USB_STATE=CONFIGURED
[ 5.105734] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled
[ 5.105753] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled
[ 5.106037] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready
[ 5.110877] tegra-xudc-new 700d0000.xudc: ep 13 disabled
[ 5.110980] tegra-xudc-new 700d0000.xudc: ep 8 disabled
[ 5.130602] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled
[ 5.130620] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled
[ 5.199752] Adding 506380k swap on /dev/zram0. Priority:5 extents:1
across:506380k SS
[ 5.206058] zram1: detected capacity change from 0 to 518537216
[ 5.218110] Adding 506380k swap on /dev/zram1. Priority:5 extents:1
across:506380k SS
[ 5.222046] zram2: detected capacity change from 0 to 518537216
[ 5.257774] Adding 506380k swap on /dev/zram2. Priority:5 extents:1
across:506380k SS
[ 5.267470] zram3: detected capacity change from 0 to 518537216
[ 5.311347] Adding 506380k swap on /dev/zram3. Priority:5 extents:1
across:506380k SS
[ 5.656698] Bridge firewalling registered
[ 5.713502] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 5.907516] systemd-journald[1983]: File
/var/log/journal/a3d9197b765643568af09eb2bd3e5ce7/user-1000.journal corrupted or
uncleanly shut down, renaming and replacing.
[ 6.140295] Netfilter messages via NETLINK v0.30.
[ 6.143594] ctnetlink v0.93: registering with nfnetlink.
[ 6.400209] tegradc tegradc.0: unblank
[ 6.400452] tegradc tegradc.1: blank - powerdown
[ 6.459875] IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
[ 7.263687] fuse init (API version 7.26)
[ 8.966680] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 2
[ 8.986684] usb 1-3: usb_suspend_both: status 0
[ 8.986777] usb usb1: usb_suspend_both: status 0
[ 8.986787] tegra-xusb 70090000.xusb: entering ELPG
[ 8.987791] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 1, speed 0
[ 8.987975] tegra-pmc: PMC tegra_pmc_utmi_phy_enable_sleepwalk : port 2, speed 3
[ 8.988857] tegra-xusb 70090000.xusb: entering ELPG done
[ 10.075566] l4tbr0: port 2(usb0) entered blocking state
[ 10.075571] l4tbr0: port 2(usb0) entered forwarding state
[ 10.075644] l4tbr0: port 1(rndis0) entered blocking state
[ 10.075648] l4tbr0: port 1(rndis0) entered forwarding state
[ 10.075952] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready
[ 10.075969] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready
[ 15.155732] tegra-xusb 70090000.xusb: exiting ELPG
[ 15.159362] tegra-xusb 70090000.xusb: Firmware timestamp: 2020-07-31 09:33:12
UTC, Version: 50.26 release
[ 15.159633] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 0
[ 15.159653] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 1
[ 15.159671] tegra-pmc: PMC tegra_pmc_utmi_phy_disable_sleepwalk : port 2
[ 15.160095] tegra-xusb 70090000.xusb: exiting ELPG done
[ 15.160265] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 2
[ 31.858854] vdd-fan: disabling
[ 31.858859] vdd-usb-vbus: disabling
[ 31.858861] vdd-usb-vbus2: disabling
[ 31.858871] vddio-sdmmc-ap: disabling
[ 31.858940] vddio-sdmmc3-ap: disabling
[ 31.858996] vdd-3v3-sd: disabling
[ 31.859000] avdd-io-edp-1v05: disabling
[ 31.859003] vdd-usb-hub-en: disabling
[ 332.862685] tegra-xudc-new 700d0000.xudc: port_reset_war_work
[ 332.862693] tegra-xudc-new 700d0000.xudc: pls = 4
[ 332.862696] tegra-xudc-new 700d0000.xudc: toggle vbus
[ 332.874781] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0
[ 332.874788] tegra-xudc-new 700d0000.xudc: vbus state: 0
[ 332.874793] tegra-xudc-new 700d0000.xudc: device mode off: 0
[ 332.875127] tegra-xudc-new 700d0000.xudc: ep 3 disabled
[ 332.875150] tegra-xudc-new 700d0000.xudc: ep 2 disabled
[ 332.875166] tegra-xudc-new 700d0000.xudc: ep 5 disabled
[ 332.875180] tegra-xudc-new 700d0000.xudc: ep 4 disabled
[ 332.875193] tegra-xudc-new 700d0000.xudc: ep 7 disabled
[ 332.875221] tegra-xudc-new 700d0000.xudc: ep 9 disabled
[ 332.875243] tegra-xudc-new 700d0000.xudc: ep 13 disabled
[ 332.875268] tegra-xudc-new 700d0000.xudc: ep 8 disabled
[ 332.875285] tegra-xudc-new 700d0000.xudc: ep 15 disabled
[ 332.875302] tegra-xudc-new 700d0000.xudc: ep 11 disabled
[ 332.875341] tegra-xudc-new 700d0000.xudc: ep 6 disabled
[ 332.875396] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 0
[ 332.875409] tegra-xudc-new 700d0000.xudc: active: 1 => 0
[ 332.875450] android_work: sent uevent USB_STATE=DISCONNECTED
[ 332.878020] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 332.878290] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 332.878341] l4tbr0: port 1(rndis0) entered disabled state
[ 332.878903] l4tbr0: port 2(usb0) entered disabled state
[ 339.662707] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1
[ 339.662770] tegra-xudc-new 700d0000.xudc: vbus state: 1
[ 339.662781] tegra-xudc-new 700d0000.xudc: exiting ELPG
[ 339.663427] tegra-xudc-new 700d0000.xudc: exiting ELPG done
[ 339.663434] tegra-xudc-new 700d0000.xudc: device mode on: 0
[ 339.663442] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0
[ 339.663451] tegra-xudc-new 700d0000.xudc: active: 0 => 1
[ 339.862691] tegra-xudc-new 700d0000.xudc: port_reset_war_work
[ 339.862699] tegra-xudc-new 700d0000.xudc: pls = 4
[ 339.862702] tegra-xudc-new 700d0000.xudc: toggle vbus
[ 340.330717] tegra-xudc-new 700d0000.xudc: port_reset_war_work
[ 340.330724] tegra-xudc-new 700d0000.xudc: pls = 4
[ 340.330727] tegra-xudc-new 700d0000.xudc: toggle vbus
[ 340.642704] tegra-xudc-new 700d0000.xudc: port_reset_war_work
[ 340.642711] tegra-xudc-new 700d0000.xudc: pls = 4
[ 340.642714] tegra-xudc-new 700d0000.xudc: toggle vbus
[ 340.774703] tegra-xudc-new 700d0000.xudc: port_reset_war_work
[ 340.774710] tegra-xudc-new 700d0000.xudc: pls = 4
[ 340.774713] tegra-xudc-new 700d0000.xudc: toggle vbus
[ 340.819787] android_work: did not send uevent (0 0 (null))
[ 341.471842] android_work: did not send uevent (0 0 (null))
[ 341.536548] android_work: sent uevent USB_STATE=CONNECTED
[ 341.599428] android_work: sent uevent USB_STATE=DISCONNECTED
[ 341.688537] android_work: sent uevent USB_STATE=CONNECTED
[ 341.693864] configfs-gadget gadget: high-speed config #1: c
[ 341.693892] tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled
[ 341.693908] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled
[ 341.693922] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled
[ 341.694011] tegra-xudc-new 700d0000.xudc: ep 9 (type: 3, dir: in) enabled
[ 341.694027] tegra-xudc-new 700d0000.xudc: ep 7 (type: 2, dir: in) enabled
[ 341.694041] tegra-xudc-new 700d0000.xudc: ep 4 (type: 2, dir: out) enabled
[ 341.694166] tegra-xudc-new 700d0000.xudc: ep 15 (type: 3, dir: in) enabled
[ 341.694319] android_work: sent uevent USB_STATE=CONFIGURED
[ 341.694502] tegra-xudc-new 700d0000.xudc: ep 11 (type: 2, dir: in) enabled
[ 341.694519] tegra-xudc-new 700d0000.xudc: ep 6 (type: 2, dir: out) enabled
[ 341.700627] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled
[ 341.700645] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled
[ 341.701843] tegra-xudc-new 700d0000.xudc: ep 13 disabled
[ 341.701935] tegra-xudc-new 700d0000.xudc: ep 8 disabled
[ 341.721489] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled
[ 341.721507] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled
[ 347.493719] l4tbr0: port 2(usb0) entered blocking state
[ 347.493725] l4tbr0: port 2(usb0) entered forwarding state
[ 347.493791] l4tbr0: port 1(rndis0) entered blocking state
[ 347.493796] l4tbr0: port 1(rndis0) entered forwarding state
[ 347.494882] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready
[ 347.494907] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready
[ 1025.522707] tegra-xudc-new 700d0000.xudc: port_reset_war_work
[ 1025.522715] tegra-xudc-new 700d0000.xudc: pls = 4
[ 1025.522718] tegra-xudc-new 700d0000.xudc: toggle vbus
[ 1025.538774] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0
[ 1025.538781] tegra-xudc-new 700d0000.xudc: vbus state: 0
[ 1025.538788] tegra-xudc-new 700d0000.xudc: device mode off: 0
[ 1025.539156] tegra-xudc-new 700d0000.xudc: ep 3 disabled
[ 1025.539176] tegra-xudc-new 700d0000.xudc: ep 2 disabled
[ 1025.539192] tegra-xudc-new 700d0000.xudc: ep 5 disabled
[ 1025.539207] tegra-xudc-new 700d0000.xudc: ep 4 disabled
[ 1025.539220] tegra-xudc-new 700d0000.xudc: ep 7 disabled
[ 1025.539249] tegra-xudc-new 700d0000.xudc: ep 9 disabled
[ 1025.539272] tegra-xudc-new 700d0000.xudc: ep 13 disabled
[ 1025.539290] tegra-xudc-new 700d0000.xudc: ep 8 disabled
[ 1025.539307] tegra-xudc-new 700d0000.xudc: ep 15 disabled
[ 1025.539356] tegra-xudc-new 700d0000.xudc: ep 11 disabled
[ 1025.539376] tegra-xudc-new 700d0000.xudc: ep 6 disabled
[ 1025.539460] tegra-xusb-padctl 7009f000.xusb_padctl: power down UTMI pad 0
[ 1025.539473] tegra-xudc-new 700d0000.xudc: active: 1 => 0
[ 1025.539508] android_work: sent uevent USB_STATE=DISCONNECTED
[ 1025.543895] tegra-xudc-new 700d0000.xudc: entering ELPG
[ 1025.544161] tegra-xudc-new 700d0000.xudc: entering ELPG done
[ 1025.546412] l4tbr0: port 1(rndis0) entered disabled state
[ 1025.546547] l4tbr0: port 2(usb0) entered disabled state
[ 1044.406709] extcon-gpio-states extcon:extcon@1: Cable state:1, cable id:1
[ 1044.406769] tegra-xudc-new 700d0000.xudc: vbus state: 1
[ 1044.406779] tegra-xudc-new 700d0000.xudc: exiting ELPG
[ 1044.407401] tegra-xudc-new 700d0000.xudc: exiting ELPG done
[ 1044.407409] tegra-xudc-new 700d0000.xudc: device mode on: 0
[ 1044.407416] tegra-xusb-padctl 7009f000.xusb_padctl: power on UTMI pads 0
[ 1044.407424] tegra-xudc-new 700d0000.xudc: active: 0 => 1
[ 1044.606679] tegra-xudc-new 700d0000.xudc: port_reset_war_work
[ 1044.606688] tegra-xudc-new 700d0000.xudc: pls = 4
[ 1044.606692] tegra-xudc-new 700d0000.xudc: toggle vbus
[ 1045.118718] tegra-xudc-new 700d0000.xudc: port_reset_war_work
[ 1045.118727] tegra-xudc-new 700d0000.xudc: pls = 4
[ 1045.118731] tegra-xudc-new 700d0000.xudc: toggle vbus
[ 1045.426694] tegra-xudc-new 700d0000.xudc: port_reset_war_work
[ 1045.426701] tegra-xudc-new 700d0000.xudc: pls = 4
[ 1045.426704] tegra-xudc-new 700d0000.xudc: toggle vbus
[ 1045.558699] tegra-xudc-new 700d0000.xudc: port_reset_war_work
[ 1045.558706] tegra-xudc-new 700d0000.xudc: pls = 4
[ 1045.558710] tegra-xudc-new 700d0000.xudc: toggle vbus
[ 1045.603520] android_work: did not send uevent (0 0 (null))
[ 1046.274236] android_work: did not send uevent (0 0 (null))
[ 1046.342952] android_work: sent uevent USB_STATE=CONNECTED
[ 1046.405794] android_work: sent uevent USB_STATE=DISCONNECTED
[ 1046.490951] android_work: sent uevent USB_STATE=CONNECTED
[ 1046.494656] configfs-gadget gadget: high-speed config #1: c
[ 1046.494686] tegra-xudc-new 700d0000.xudc: ep 5 (type: 3, dir: in) enabled
[ 1046.494702] tegra-xudc-new 700d0000.xudc: ep 3 (type: 2, dir: in) enabled
[ 1046.494717] tegra-xudc-new 700d0000.xudc: ep 2 (type: 2, dir: out) enabled
[ 1046.494805] tegra-xudc-new 700d0000.xudc: ep 9 (type: 3, dir: in) enabled
[ 1046.494820] tegra-xudc-new 700d0000.xudc: ep 7 (type: 2, dir: in) enabled
[ 1046.494834] tegra-xudc-new 700d0000.xudc: ep 4 (type: 2, dir: out) enabled
[ 1046.494957] tegra-xudc-new 700d0000.xudc: ep 15 (type: 3, dir: in) enabled
[ 1046.495020] tegra-xudc-new 700d0000.xudc: ep 11 (type: 2, dir: in) enabled
[ 1046.495036] tegra-xudc-new 700d0000.xudc: ep 6 (type: 2, dir: out) enabled
[ 1046.495233] android_work: sent uevent USB_STATE=CONFIGURED
[ 1046.497455] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled
[ 1046.497472] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled
[ 1046.498939] tegra-xudc-new 700d0000.xudc: ep 13 disabled
[ 1046.499030] tegra-xudc-new 700d0000.xudc: ep 8 disabled
[ 1046.519162] tegra-xudc-new 700d0000.xudc: ep 13 (type: 2, dir: in) enabled
[ 1046.519180] tegra-xudc-new 700d0000.xudc: ep 8 (type: 2, dir: out) enabled
[ 1052.217334] l4tbr0: port 2(usb0) entered blocking state
[ 1052.217339] l4tbr0: port 2(usb0) entered forwarding state
[ 1052.217405] l4tbr0: port 1(rndis0) entered blocking state
[ 1052.217409] l4tbr0: port 1(rndis0) entered forwarding state
[ 1052.219646] IPv6: ADDRCONF(NETDEV_UP): l4tbr0: link is not ready
[ 1052.219678] IPv6: ADDRCONF(NETDEV_CHANGE): l4tbr0: link becomes ready
[ 1518.706715] FAN rising trip_level:1 cur_temp:51000 trip_temps[2]:61000
[ 2778.157932] systemd-journald[1983]: Received request to rotate journal from PID
1
[ 2778.235437] systemd-journald[1983]: Vacuuming done, freed 0B of archived
journals from /var/log/journal/a3d9197b765643568af09eb2bd3e5ce7.
[ 3020.626709] FAN rising trip_level:2 cur_temp:63000 trip_temps[3]:71000
[ 3020.853218] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 3026.454916] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 3091.308260] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 3094.309296] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 3118.491155] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -
2147483647 forced to -127000
[ 4111.506716] FAN rising trip_level:3 cur_temp:71000 trip_temps[4]:82000
[ 4239.099217] hot-surface-alert cooling state: 0 -> 1
[ 4240.176026] sysrq: HELP : loglevel(0-9) reboot(b) crash(c) terminate-all-
tasks(e) memory-full-oom-kill(f) kill-all-tasks(i) thaw-filesystems(j) sak(k) show-
backtrace-all-active-cpus(l) show-memory-usage(m) nice-all-RT-tasks(n) poweroff(o)
show-registers(p) show-all-timers(q) unraw(r) sync(s) show-task-states(t)
unmount(u) show-blocked-tasks(w) dump-ftrace-buffer(z)