[ 0.

000000] Booting Linux on physical CPU 0x0000000000 [0x51df805e]

[ 0.000000] Linux version 4.19.113-perf-g4faa92598371 (builder@c3-xm-ota-
bd017.bj) (clang version 10.0.6 for Android NDK) #1 SMP PREEMPT Sat Mar 12 12:05:11
CST 2022
[ 0.000000] Powerup reason=0x800041
[ 0.000000] OF: fdt: Powerup pureason 0x800041
[ 0.000000] Machine model: Qualcomm Technologies, Inc. Gauguin
[ 0.000000] ramoops: msm_reserve_ramoops_memory addr=b0000000,size=400000
[ 0.000000] ramoops: msm_reserve_ramoops_memory record_size=0,ftrace_size=0
[ 0.000000] OF: reserved mem: OVERLAP DETECTED!\x0adisp_rdump_region@0xa0000000
(0x00000000a0000000--0x00000000a2300000) overlaps with cont_splash_region
(0x00000000a0000000--0x00000000a2300000)
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fd400000, size
40 MiB
[ 0.000000] OF: reserved mem: initialized node mem_dump_region, compatible id
shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fc000000, size
20 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_region, compatible id
shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fb000000, size
16 MiB
[ 0.000000] OF: reserved mem: initialized node qseecom_ta_region, compatible id
shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fa800000, size
8 MiB
[ 0.000000] OF: reserved mem: initialized node adsp_region, compatible id
shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f1c00000, size
140 MiB
[ 0.000000] OF: reserved mem: initialized node secure_display_region, compatible
id shared-dma-pool
[ 0.000000] Reserved memory: created CMA memory pool at 0x00000000efc00000, size
32 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-
dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000080000000, size
6 MiB
[ 0.000000] OF: reserved mem: initialized node hyp_region@80000000, compatible
id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000080600000, size
2 MiB
[ 0.000000] OF: reserved mem: initialized node xbl_aop_mem@80700000, compatible
id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x00000000808ff000, size
0 MiB
[ 0.000000] OF: reserved mem: initialized node sec_apps_region@808ff000,
compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000080900000, size
2 MiB
[ 0.000000] OF: reserved mem: initialized node smem@80900000, compatible id
removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000080b00000, size
30 MiB
[ 0.000000] OF: reserved mem: initialized node cdsp_sec_regions@80b00000,
compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086000000, size
5 MiB
[ 0.000000] OF: reserved mem: initialized node camera_region@86000000,
compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086500000, size
5 MiB
[ 0.000000] OF: reserved mem: initialized node pil_npu_region@86500000,
compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086a00000, size
5 MiB
[ 0.000000] OF: reserved mem: initialized node pil_video_region@86a00000,
compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000086f00000, size
30 MiB
[ 0.000000] OF: reserved mem: initialized node cdsp_regions@86f00000, compatible
id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x0000000088d00000, size
40 MiB
[ 0.000000] OF: reserved mem: initialized node pil_adsp_region@88d00000,
compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008b500000, size
2 MiB
[ 0.000000] OF: reserved mem: initialized node wlan_fw_region@8b500000,
compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008b700000, size
0 MiB
[ 0.000000] OF: reserved mem: initialized node ipa_fw_region@8b700000,
compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008b710000, size
0 MiB
[ 0.000000] OF: reserved mem: initialized node ipa_gsi_region@8b710000,
compatible id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008b715400, size
0 MiB
[ 0.000000] OF: reserved mem: initialized node gpu_region@8b715400, compatible
id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x000000008b800000, size
248 MiB
[ 0.000000] OF: reserved mem: initialized node modem_region@8b800000, compatible
id removed-dma-pool
[ 0.000000] Removed memory: created DMA memory pool at 0x00000000c0000000, size
123 MiB
[ 0.000000] OF: reserved mem: initialized node removed_region@c0000000,
compatible id removed-dma-pool
[ 0.000000] On node 0 totalpages: 1427815
[ 0.000000] Normal zone: 22310 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 1427815 pages, LIFO batch:63
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.1 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] psci: SMC Calling Convention v1.1
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 24 pages/cpu s60056 r8192 d30056 u98304
[ 0.000000] pcpu-alloc: s60056 r8192 d30056 u98304 alloc=24*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: kernel page table isolation forced OFF by kpti command
line option
[ 0.000000] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1405505
[ 0.000000] Kernel command line: ramoops_memreserve=4M rcupdate.rcu_expedited=1
rcu_nocbs=0-7 console=ttyMSM0,115200,n8 androidboot.hardware=qcom
androidboot.console=ttyMSM0 androidboot.memcg=1 lpm_levels.sleep_disabled=1
video=vfb:640x400,bpp=32,memsize=3072000 msm_rtb.filter=0x237
service_locator.enable=1 androidboot.usbcontroller=a600000.dwc3 swiotlb=2048
cgroup.memory=nokmem,nosocket loop.max_part=7 androidboot.fastboot=1
androidboot.selinux=permissive buildvariant=eng
androidboot.verifiedbootstate=orange androidboot.keymaster=1
androidboot.vbmeta.device=PARTUUID=bb10aca0-705b-f29d-277e-56a0dd725a24
androidboot.vbmeta.avb_version=1.0 androidboot.vbmeta.device_state=unlocked
androidboot.vbmeta.hash_alg=sha256 androidboot.vbmeta.size=2112
androidboot.vbmeta.digest=d71d8df7a33919dee988787d6d2c3ff045caed8f5cdec3d1a39cd2fd9
d246b75 androidboot.vbmeta.invalidate_on_error=yes androidboot.veritymode=enforcing
androidboot.bootdevice=1d84000.ufshc androidboot.fstab_suffix=default androidboot.b
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 5202100K/5711260K available (19966K kernel code, 2776K
rwdata, 8440K rodata, 6144K init, 8704K bss, 247016K reserved, 262144K cma-
reserved)
[ 0.000000] random: random: get_random_u64 called from
__kmem_cache_create+0x3c/0x448 with crng_init=1
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000]
[ 0.000000] **********************************************************
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] ** **
[ 0.000000] ** trace_printk() being used. Allocating extra memory. **
[ 0.000000] ** **
[ 0.000000] ** This means that this is a DEBUG kernel and it is **
[ 0.000000] ** unsafe for production use. **
[ 0.000000] ** **
[ 0.000000] ** If you see this message and you are not debugging **
[ 0.000000] ** the kernel, report this immediately to your vendor! **
[ 0.000000] ** **
[ 0.000000] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.000000] **********************************************************
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: \x09RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] \x09All grace periods are expedited (rcu_expedited).
[ 0.000000] \x09Tasks RCU enabled.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] GICv3: Distributor has no Range Selector support
[ 0.000000] GICv3: no VLPI support, no direct LPI support
[ 0.000000] rcu: \x09Offload RCU callbacks from CPUs: 0-7.
[ 0.000000] arch_timer: CPU0: Trapping CNTVCT access
[ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles:
0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every
4398046511078ns
[ 0.000018] clocksource: Switched to clocksource arch_sys_counter
[ 0.001883] Calibrating delay loop (skipped), value calculated using timer
frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.001901] pid_max: default: 32768 minimum: 301
[ 0.002024] Security Framework initialized
[ 0.002037] SELinux: Initializing.
[ 0.002182] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002200] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.008686] NOHZ: local_softirq_pending 02
[ 0.009709] ASID allocator initialised with 32768 entries
[ 0.011824] rcu: Hierarchical SRCU implementation.
[ 0.022241] shmbridge is enabled
[ 0.024864] smp: Bringing up secondary CPUs ...
[ 0.034795] Detected VIPT I-cache on CPU1
[ 0.034865] arch_timer: CPU1: Trapping CNTVCT access
[ 0.034873] CPU1: Booted secondary processor 0x0000000100 [0x51df805e]
[ 0.044959] Detected VIPT I-cache on CPU2
[ 0.045017] arch_timer: CPU2: Trapping CNTVCT access
[ 0.045024] CPU2: Booted secondary processor 0x0000000200 [0x51df805e]
[ 0.055126] Detected VIPT I-cache on CPU3
[ 0.055173] arch_timer: CPU3: Trapping CNTVCT access
[ 0.055180] CPU3: Booted secondary processor 0x0000000300 [0x51df805e]
[ 0.065385] Detected VIPT I-cache on CPU4
[ 0.065434] arch_timer: CPU4: Trapping CNTVCT access
[ 0.065439] CPU4: Booted secondary processor 0x0000000400 [0x51df805e]
[ 0.075744] Detected VIPT I-cache on CPU5
[ 0.075794] arch_timer: CPU5: Trapping CNTVCT access
[ 0.075799] CPU5: Booted secondary processor 0x0000000500 [0x51df805e]
[ 0.087229] CPU features: enabling workaround for Mismatched cache type
[ 0.087238] CPU features: enabling workaround for ARM erratum 1542418
[ 0.087245] CPU features: detected: Hardware dirty bit management
[ 0.087251] Detected PIPT I-cache on CPU6
[ 0.087276] CPU features: Unsupported CPU feature variation detected.
[ 0.087338] arch_timer: CPU6: Trapping CNTVCT access
[ 0.087350] CPU6: Booted secondary processor 0x0000000600 [0x411fd0d0]
[ 0.098290] Detected PIPT I-cache on CPU7
[ 0.098375] arch_timer: CPU7: Trapping CNTVCT access
[ 0.098388] CPU7: Booted secondary processor 0x0000000700 [0x411fd0d0]
[ 0.098712] smp: Brought up 1 node, 8 CPUs
[ 0.098758] SMP: Total of 8 processors activated.
[ 0.098765] CPU features: detected: GIC system register CPU interface
[ 0.098768] CPU features: detected: Privileged Access Never
[ 0.098772] CPU features: detected: User Access Override
[ 0.098775] CPU features: detected: 32-bit EL0 Support
[ 0.098780] CPU features: detected: RAS Extension Support
[ 0.099207] CPU: All CPU(s) started at EL1
[ 0.099263] alternatives: patching kernel code
[ 0.150837] Registered cp15_barrier emulation handler
[ 0.150867] Registered setend emulation handler
[ 0.151548] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 7645041785100000 ns
[ 0.151567] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.157001] ramoops: msm_register_ramoops_device
[ 0.157138] pinctrl core: initialized pinctrl subsystem
[ 0.157612] xlogchar_init
[ 0.157923] xlogchar_init done
[ 0.157954]
[ 0.157960] *************************************************************
[ 0.157966] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.157971] ** **
[ 0.157977] ** IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
[ 0.157982] ** **
[ 0.157987] ** This means that this kernel is built to expose internal **
[ 0.157993] ** IOMMU data structures, which may compromise security on **
[ 0.157998] ** your system. **
[ 0.158003] ** **
[ 0.158008] ** If you see this message and you are not debugging the **
[ 0.158013] ** kernel, report this immediately to your vendor! **
[ 0.158018] ** **
[ 0.158024] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
[ 0.158029] *************************************************************
[ 0.158395] NET: Registered protocol family 16
[ 0.159631] schedtune: configured to support 6 boost groups
[ 0.159751] audit: initializing netlink subsys (disabled)
[ 0.159965] audit: type=2000 audit(0.155:1): state=initialized audit_enabled=0
res=1
[ 0.166351] persistent_ram: found existing invalid buffer, size 113306, start
114330
[ 0.167125] console [pstore-1] enabled
[ 0.167213] pstore: Registered ramoops as persistent store backend
[ 0.167226] ramoops: attached 0x400000@0xb0000000, ecc: 0/0
[ 0.167902] cpuidle: using governor menu
[ 0.168185] cpuidle: using governor qcom
[ 0.168330] NET: Registered protocol family 42
[ 0.168782] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.171416] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.172219] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.172805] exit: IPA_USB init success!
[ 0.199953] msm-dcc 109f000.dcc_v2: DCC list passed 4
[ 0.200552] msm-dcc 109f000.dcc_v2: All values written to enable.
[ 0.202049] Unable to find DT property: qcom,msm-imem-download_mode
[ 0.203133] Unable to find DT property: qcom,msm-imem-emergency_download_mode
[ 0.203745] platform c1700000.qseecom: assigned reserved memory node
qseecom_region
[ 0.205089] msm_watchdog 17c10000.qcom,wdt: wdog absent resource not present
[ 0.205380] msm_watchdog 17c10000.qcom,wdt: MSM Watchdog Initialized
[ 0.205632] sps:sps is ready.
[ 0.206181] platform 3000000.qcom,lpass: assigned reserved memory node
pil_adsp_region@88d00000
[ 0.206377] platform 8300000.qcom,turing: assigned reserved memory node
cdsp_regions@86f00000
[ 0.206571] platform 4080000.qcom,mss: assigned reserved memory node
modem_region@8b800000
[ 0.207530] spmi spmi-0: PMIC arbiter version v5 (0x50010000)
[ 0.207821] gcc-lagoon 100000.qcom,gcc: Linked as a consumer to regulator.27
[ 0.207884] gcc-lagoon 100000.qcom,gcc: Linked as a consumer to regulator.28
[ 0.216113] LCDB: qpnp_lcdb_regulator_probe: Failed to parse dt rc=-517
[ 0.217081] OF: Bad cell count for /soc/qcom,spmi@c440000/qcom,pmk8350@6
[ 0.217099] OF: Bad cell count for /soc/qcom,spmi@c440000/qcom,pmk8350@6
[ 0.217208] OF: Bad cell count for /soc/qcom,spmi@c440000/qcom,pmk8350@6
[ 0.217270] OF: Bad cell count for /soc/qcom,spmi@c440000/qcom,pmk8350@6
[ 0.217429] OF: Bad cell count for /soc/qcom,spmi@c440000/qcom,pmk8350@6
[ 0.217533] OF: Bad cell count for /soc/qcom,spmi@c440000/qcom,pmk8350@6
[ 0.217593] OF: Bad cell count for /soc/qcom,spmi@c440000/qcom,pmk8350@6
[ 0.217697] OF: Bad cell count for /soc/qcom,spmi@c440000/qcom,pmk8350@6
[ 0.217886] OF: Bad cell count for /soc/qcom,spmi@c440000/qcom,pmk8350@6
[ 0.222453] gcc-lagoon 100000.qcom,gcc: Registered GCC clocks
[ 0.223028] lagoon-gpucc 3d90000.qcom,gpucc: Linked as a consumer to
regulator.27
[ 0.223090] lagoon-gpucc 3d90000.qcom,gpucc: Linked as a consumer to regulator.3
[ 0.223138] lagoon-gpucc 3d90000.qcom,gpucc: Linked as a consumer to regulator.4
[ 0.228884] lagoon-gpucc 3d90000.qcom,gpucc: Registered GPU CC clocks
[ 0.229129] lagoon-npucc 9980000.qcom,npucc: Linked as a consumer to
regulator.27
[ 0.238338] lagoon-npucc 9980000.qcom,npucc: Registered NPU CC clocks
[ 0.238687] video_cc-lagoon aaf0000.qcom,videocc: Linked as a consumer to
regulator.27
[ 0.244658] video_cc-lagoon aaf0000.qcom,videocc: Registered VIDEO CC clocks
[ 0.245694] platform soc:qcom,smem: assigned reserved memory node smem@80900000
[ 0.246196] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node
adsp_region
[ 0.248694] platform aab0000.qcom,venus: assigned reserved memory node
pil_video_region@86a00000
[ 0.248984] platform 9800000.qcom,npu: assigned reserved memory node
pil_npu_region@86500000
[ 0.252597] platform soc:mem_dump: assigned reserved memory node mem_dump_region
[ 0.276807] MSM Memory Dump base table set up
[ 0.276830] MSM Memory Dump apps data table set up
[ 0.277782] platform soc:qcom,ipa_fws: assigned reserved memory node
ipa_fw_region@8b700000
[ 0.300107] OF: amba_device_add() failed (-16) for /soc/cti@680b000
[ 0.325406] cryptd: max_cpu_qlen set to 1000
[ 0.330203] gdsc 3d9106c.qcom,gdsc: Linked as a consumer to regulator.27
[ 0.330243] gpu_cx_gdsc: supplied by pm6150a_s1_level
[ 0.330749] gpu_gx_gdsc: supplied by pm6350_s3_level
[ 0.333756] qmp-aop-clk soc:qcom,aopcc: Registered clocks with AOP
[ 0.335930] lagoon-camcc ad00000.qcom,camcc: Linked as a consumer to
regulator.27
[ 0.336004] lagoon-camcc ad00000.qcom,camcc: Linked as a consumer to regulator.4
[ 0.345244] lagoon-camcc ad00000.qcom,camcc: Registered CAM CC clocks
[ 0.345906] disp_cc-lagoon af00000.qcom,dispcc: Linked as a consumer to
regulator.27
[ 0.349593] disp_cc-lagoon af00000.qcom,dispcc: Registered DISP CC clocks
[ 0.353161] Minidump: Enabled with max number of regions 200
[ 0.493957] KPI: Bootloader start count = 128897
[ 0.493969] KPI: Bootloader end count = 163048
[ 0.493979] KPI: Bootloader display count = 355500032
[ 0.493989] KPI: Bootloader load kernel count = 17829714
[ 0.493999] KPI: Kernel MPM timestamp = 185890
[ 0.494006] KPI: Kernel MPM Clock frequency = 32768
[ 0.494041] socinfo_print: v0.15, id=459, ver=1.0, raw_id=355, raw_ver=0,
hw_plat=35, hw_plat_ver=1638400\x0a accessory_chip=0, hw_plat_subtype=0,
pmic_model=65590, pmic_die_revision=65536 foundry_id=3 serial_number=607448081
num_pmics=4 chip_family=0x6c raw_device_family=0x6 raw_device_number=0x12
nproduct_id=0x41b num_clusters=0x0 ncluster_array_offset=0xb0
num_defective_parts=0xd ndefective_parts_array_offset=0xb0 nmodem_supported=0xff
[ 0.494054] msm_bus_fabric_rpmh_init_driver
[ 0.494555] msm_bus: Probe started
[ 0.495396] msm_bus_device 16e0000.ad-hoc-bus: Bus type is missing
[ 0.498732] msm_bus: DT Parsing complete
[ 0.501178] msm_bus_fab_init_noc_ops: Invalid Bus type
[ 0.521963] wide_ldo_avdd2_regulator: supplied by pm6350_s2
[ 0.522426] wide_ldo_dvdd_regulator: supplied by pm6150a_bob
[ 0.522787] depth_ldo_avdd_regulator: supplied by pm6150a_bob
[ 0.524592] arm-smmu 3d40000.arm,smmu-kgsl: Linked as a consumer to regulator.56
[ 0.524695] arm-smmu 3d40000.arm,smmu-kgsl: \x09non-coherent table walk
[ 0.524707] arm-smmu 3d40000.arm,smmu-kgsl: \x09(IDR0.CTTW overridden by FW
configuration)
[ 0.524720] arm-smmu 3d40000.arm,smmu-kgsl: \x09stream matching with 5 register
groups
[ 0.527018] register_client_adhoc:find path.src 161 dest 627
[ 0.527365] register_client_adhoc:Client handle 1 apps_smmu
[ 0.527505] arm-smmu 15000000.apps-smmu: \x09non-coherent table walk
[ 0.527520] arm-smmu 15000000.apps-smmu: \x09(IDR0.CTTW overridden by FW
configuration)
[ 0.527532] arm-smmu 15000000.apps-smmu: \x09stream matching with 71 register
groups
[ 0.528884] register_client_adhoc:find path.src 161 dest 627
[ 0.529207] register_client_adhoc:Client handle 2 apps_smmu
[ 0.529787] register_client_adhoc:find path.src 161 dest 627
[ 0.530108] register_client_adhoc:Client handle 3 apps_smmu
[ 0.530678] qsmmuv500-tbu 1518d000.mnoc_hf_0_tbu: Linked as a consumer to
regulator.47
[ 0.530739] register_client_adhoc:find path.src 22 dest 773
[ 0.530892] register_client_adhoc:Client handle 4 mnoc_hf_0_tbu
[ 0.531483] qsmmuv500-tbu 15191000.mnoc_sf_0_tbu: Linked as a consumer to
regulator.48
[ 0.531541] register_client_adhoc:find path.src 137 dest 772
[ 0.531692] register_client_adhoc:Client handle 5 mnoc_sf_0_tbu
[ 0.532257] register_client_adhoc:find path.src 161 dest 627
[ 0.532585] register_client_adhoc:Client handle 6 apps_smmu
[ 0.533123] register_client_adhoc:find path.src 154 dest 821
[ 0.533240] register_client_adhoc:Client handle 7 apps_smmu
[ 0.533782] register_client_adhoc:find path.src 161 dest 627
[ 0.534100] register_client_adhoc:Client handle 8 apps_smmu
[ 0.534888] vgaarb: loaded
[ 0.535305] SCSI subsystem initialized
[ 0.535471] usbcore: registered new interface driver usbfs
[ 0.535517] usbcore: registered new interface driver hub
[ 0.535702] usbcore: registered new device driver usb
[ 0.536148] usb_phy_generic soc:usb_nop_phy: soc:usb_nop_phy supply vcc not
found, using dummy regulator
[ 0.536209] usb_phy_generic soc:usb_nop_phy: Linked as a consumer to regulator.0
[ 0.537001] [mi-touch] xiaomi_touch_parse_dt: touch,name:xiaomi-touch
[ 0.537127] [mi-touch] xiaomi_touch_probe: over
[ 0.537404] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6350@0:qcom,power-
on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
[ 0.537439] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6350@0:qcom,power-
on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM Controlled
Shutdown)
[ 0.537883] input: qpnp_pon as
/devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-00/c440000.qcom,spmi:qcom,pm63
50@0:qcom,power-on@800/input/input0
[ 0.538972] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm7250b@2:qcom,power-
on@800: PMIC@SID2 Power-on reason: Triggered from CBL (External Power Supply) and
'cold' boot
[ 0.539007] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm7250b@2:qcom,power-
on@800: PMIC@SID2: Power-off reason: Triggered from SOFT (Software)
[ 0.539233] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6150l@4:qcom,power-
on@800: PMIC@SID4 Power-on reason: Triggered from PON1 (Secondary PMIC) and 'cold'
boot
[ 0.539266] qcom,qpnp-power-on c440000.qcom,spmi:qcom,pm6150l@4:qcom,power-
on@800: PMIC@SID4: Power-off reason: Triggered from SOFT (Software)
[ 0.539720] media: Linux media interface: v0.10
[ 0.539754] videodev: Linux video capture interface: v2.00
[ 0.539834] pps_core: LinuxPPS API ver. 1 registered
[ 0.539843] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<[email protected]>
[ 0.539862] PTP clock support registered
[ 0.547740] thermal_sys: VIRTUAL-SENSOR board sensor:
[ 0.557838] EDAC MC: Ver: 3.0.0
[ 0.566479] cpufreq: driver qcom-cpufreq-hw up and running
[ 0.567323] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory
node qseecom_region
[ 0.567350] platform soc:qcom,ion:qcom,ion-heap@19: assigned reserved memory
node qseecom_ta_region
[ 0.567388] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory
node secure_display_region
[ 0.567701] ION heap system created
[ 0.567862] ION heap secure_heap created
[ 0.567876] ION heap qsecom created at 0x00000000fc000000 with size 1400000
[ 0.567897] ION heap qsecom_ta created at 0x00000000fb000000 with size 1000000
[ 0.593016] platform soc:qcom,ion:qcom,ion-heap@14: ion_secure_carveout:
creating heap@0x80b00000, size 0x1e00000
[ 0.593023] ION heap secure_carveout created
[ 0.593049] ION heap secure_display created at 0x00000000f1c00000 with size
8c00000
[ 0.593832] PMIC@SID0: PM6350 v1.0.0.16 options: 0, 0, 0, 0
[ 0.593924] PMIC@SID2: PM7250B v1.0 options: 0, 0, 0, 0
[ 0.594010] PMIC@SID4: PM8150L v3.0 options: 0, 0, 0, 0
[ 0.594094] PMIC@SID6: PMK8350 v2.0.0.32 options: 0, 0, 0, 0
[ 0.594929] register_client_adhoc:find path.src 90 dest 770
[ 0.595057] register_client_adhoc:find path.src 129 dest 512
[ 0.595089] register_client_adhoc:find path.src 90 dest 585
[ 0.595135] register_client_adhoc:find path.src 1 dest 676
[ 0.595216] register_client_adhoc:find path.src 143 dest 777
[ 0.595234] register_client_adhoc:Client handle 9 ipa
[ 0.596447] ipa ipa3_smp2p_probe:8123 fail to get smp2p clk resp bit -517
[ 0.596652] ipa soc:ipa_smmu_ap: Linked as a consumer to 15000000.apps-smmu
[ 0.608661] iommu: Adding device soc:ipa_smmu_ap to group 0
[ 0.609107] ipa soc:ipa_smmu_wlan: Linked as a consumer to 15000000.apps-smmu
[ 0.609502] iommu: Adding device soc:ipa_smmu_wlan to group 1
[ 0.609830] ipa soc:ipa_smmu_uc: Linked as a consumer to 15000000.apps-smmu
[ 0.610190] iommu: Adding device soc:ipa_smmu_uc to group 2
[ 0.610836] ipa ipa3_smp2p_probe:8123 fail to get smp2p clk resp bit -517
[ 0.612544] devfreq-qcom-fw 18321000.qcom,devfreq-l3:qcom,cpu0-cpu-l3-lat:
Devfreq QCOM Firmware dev registered.
[ 0.613011] devfreq-qcom-fw 18321000.qcom,devfreq-l3:qcom,cpu6-cpu-l3-lat:
Devfreq QCOM Firmware dev registered.
[ 0.613439] devfreq-qcom-fw 18321000.qcom,devfreq-l3:qcom,cdsp-cdsp-l3-lat:
Devfreq QCOM Firmware dev registered.
[ 0.613459] devfreq-qcom-fw 18321000.qcom,devfreq-l3: Devfreq QCOM Firmware
parent dev inited.
[ 0.614633] Advanced Linux Sound Architecture Driver Initialized.
[ 0.615555] Bluetooth: Core ver 2.22
[ 0.615602] NET: Registered protocol family 31
[ 0.615606] Bluetooth: HCI device and connection manager initialized
[ 0.615616] Bluetooth: HCI socket layer initialized
[ 0.615620] Bluetooth: L2CAP socket layer initialized
[ 0.615638] Bluetooth: SCO socket layer initialized
[ 0.615648] NetLabel: Initializing
[ 0.615652] NetLabel: domain hash size = 128
[ 0.615655] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.615687] NetLabel: unlabeled traffic allowed by default
[ 0.616198] register_client_adhoc:find path.src 22 dest 512
[ 0.616383] register_client_adhoc:Client handle 10 bus-proxy-client
[ 0.617744] LCDB: qpnp_lcdb_regulator_probe: LCDB module successfully
registered! lcdb_en=1 ldo_voltage=5500mV ncp_voltage=5500mV bst_voltage=5650mV
[ 0.617906] qupv3_geni_se 8c0000.qcom,qupv3_0_geni_se: Linked as a consumer to
15000000.apps-smmu
[ 0.620772] iommu: Adding device 8c0000.qcom,qupv3_0_geni_se to group 3
[ 0.621002] qupv3_geni_se 9c0000.qcom,qupv3_1_geni_se: Linked as a consumer to
15000000.apps-smmu
[ 0.623838] iommu: Adding device 9c0000.qcom,qupv3_1_geni_se to group 4
[ 0.624043] ipa ipa3_smp2p_probe:8123 fail to get smp2p clk resp bit -517
[ 0.624175] clocksource: Switched to clocksource arch_sys_counter
[ 0.637811] VFS: Disk quotas dquot_6.6.0
[ 0.637831] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.639868] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
[ 0.639874] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
[ 0.639981] mdss_pll ae94a00.qcom,mdss_dsi0_pll: Failed to create
ae94a00.qcom,mdss_dsi0_pll debugfs directory
[ 0.639988] mdss_pll ae94a00.qcom,mdss_dsi0_pll: Failed to create
ae94a00.qcom,mdss_dsi0_pll debugfs directory
[ 0.639992] mdss_pll ae94a00.qcom,mdss_dsi0_pll: Failed to create
ae94a00.qcom,mdss_dsi0_pll debugfs directory
[ 0.639995] mdss_pll ae94a00.qcom,mdss_dsi0_pll: Failed to create
ae94a00.qcom,mdss_dsi0_pll debugfs directory
[ 0.639999] mdss_pll ae94a00.qcom,mdss_dsi0_pll: Failed to create
ae94a00.qcom,mdss_dsi0_pll debugfs directory
[ 0.640372] dsi_pll_clock_register_10nm: Registered DSI PLL ndx=0, clocks
successfully
[ 0.640479] NET: Registered protocol family 2
[ 0.640682] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536
bytes)
[ 0.640695] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.640760] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.640991] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.641034] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.641052] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.641111] NET: Registered protocol family 1
[ 0.641367] PCI: CLS 0 bytes, default 64
[ 0.641415] ipa ipa3_smp2p_probe:8123 fail to get smp2p clk resp bit -517
[ 0.641514] Trying to unpack rootfs image as initramfs...
[ 1.025423] Freeing initrd memory: 42580K
[ 1.026204] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters
available
[ 1.030103] Initialise system trusted keyrings
[ 1.030201] workingset: timestamp_bits=45 max_order=21 bucket_order=0
[ 1.031198] Registering sdcardfs 0.1
[ 1.031240] fuse init (API version 7.27)
[ 1.034819] Key type asymmetric registered
[ 1.034824] Asymmetric key parser 'x509' registered
[ 1.034830] io scheduler noop registered
[ 1.034867] io scheduler cfq registered (default)
[ 1.034870] io scheduler mq-deadline registered
[ 1.034872] io scheduler kyber registered
[ 1.042038] gpi_dma 800000.qcom,gpi-dma: Linked as a consumer to 15000000.apps-
smmu
[ 1.042277] iommu: Adding device 800000.qcom,gpi-dma to group 5
[ 1.042623] gpi_dma 900000.qcom,gpi-dma: Linked as a consumer to 15000000.apps-
smmu
[ 1.042813] iommu: Adding device 900000.qcom,gpi-dma to group 6
[ 1.044095] lagoon-llcc 9200000.cache-controller: Failed to create
9200000.cache-controller debugfs directory
[ 1.044359] subsys-pil-tz 3000000.qcom,lpass: Linked as a consumer to
regulator.6
[ 1.044378] subsys-pil-tz 3000000.qcom,lpass: Linked as a consumer to
regulator.21
[ 1.044401] register_client_adhoc:find path.src 125 dest 512
[ 1.044530] register_client_adhoc:Client handle 11 scm_pas
[ 1.044799] subsys-pil-tz 8300000.qcom,turing: Linked as a consumer to
regulator.27
[ 1.044813] subsys-pil-tz 8300000.qcom,turing: Linked as a consumer to
regulator.4
[ 1.044825] register_client_adhoc:find path.src 154 dest 821
[ 1.044842] register_client_adhoc:Client handle 12 pil-cdsp
[ 1.045005] subsys-pil-tz 4080000.qcom,mss: Linked as a consumer to regulator.27
[ 1.045021] subsys-pil-tz 4080000.qcom,mss: Linked as a consumer to regulator.29
[ 1.045033] register_client_adhoc:find path.src 129 dest 512
[ 1.045059] register_client_adhoc:Client handle 13 pil-modem
[ 1.045263] subsys-pil-tz aab0000.qcom,venus: Linked as a consumer to
regulator.60
[ 1.045275] register_client_adhoc:find path.src 63 dest 512
[ 1.045346] register_client_adhoc:Client handle 14 pil-venus
[ 1.045349] minidump-id not found for venus
[ 1.045417] minidump-id not found for npu
[ 1.045429] subsys-pil-tz 9800000.qcom,npu: for npu segments only will be
dumped.
[ 1.045441] subsys-pil-tz 9800000.qcom,npu: for md_npu segments only will be
dumped.
[ 1.045469] subsys-restart: __get_smem_state(): Could not get smem-states
qcom,force-stop
[ 1.045587] minidump-id not found for lagoon_ipa_fws
[ 1.045598] subsys-pil-tz soc:qcom,ipa_fws: for lagoon_ipa_fws segments only
will be dumped.
[ 1.045610] subsys-pil-tz soc:qcom,ipa_fws: for md_lagoon_ipa_fws segments only
will be dumped.
[ 1.045658] minidump-id not found for a615_zap
[ 1.045671] subsys-pil-tz soc:qcom,kgsl-hyp: for a615_zap segments only will be
dumped.
[ 1.045683] subsys-pil-tz soc:qcom,kgsl-hyp: for md_a615_zap segments only will
be dumped.
[ 1.046338] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS
segments only will be dumped.
[ 1.046363] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM
segments only will be dumped.
[ 1.046381] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG
segments only will be dumped.
[ 1.047902] icnss 18800000.qcom,icnss: Linked as a consumer to 15000000.apps-
smmu
[ 1.050887] iommu: Adding device 18800000.qcom,icnss to group 7
[ 1.050955] icnss: Recursive recovery allowed for WLAN
[ 1.050984] icnss 18800000.qcom,icnss: Linked as a consumer to regulator.9
[ 1.051000] icnss 18800000.qcom,icnss: Linked as a consumer to regulator.12
[ 1.051017] icnss 18800000.qcom,icnss: Linked as a consumer to regulator.32
[ 1.051033] icnss 18800000.qcom,icnss: Linked as a consumer to regulator.41
[ 1.051052] icnss 18800000.qcom,icnss: Linked as a consumer to regulator.40
[ 1.051149] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be
dumped.
[ 1.051233] icnss: Platform driver probed successfully
[ 1.051920] ignore console register
[ 1.052179] register_client_adhoc:find path.src 176 dest 823
[ 1.052207] register_client_adhoc:find path.src 151 dest 512
[ 1.052323] register_client_adhoc:Client handle 15 8c0000.qcom,qupv3_0_geni_se
[ 1.052327] msm_geni_serial 884000.qcom,qup_uart: Wakeup byte 0xfd
[ 1.052392] msm_geni_serial 884000.qcom,qup_uart: Serial port0 added.FifoSize 64
is_console0
[ 1.052678] 884000.qcom,qup_uart: ttyHS0 at MMIO 0x884000 (irq = 275, base_baud
= 0) is a MSM
[ 1.052781] msm_geni_serial_init: Driver initialized
[ 1.052872] register_client_adhoc:find path.src 1 dest 618
[ 1.052954] register_client_adhoc:Client handle 16 msm-rng-noc
[ 1.054738] random: crng init done
[ 1.059313] iommu-debug soc:kgsl_iommu_test_device: Linked as a consumer to
3d40000.arm,smmu-kgsl
[ 1.059361] iommu: Adding device soc:kgsl_iommu_test_device to group 8
[ 1.059642] iommu-debug soc:apps_iommu_test_device: Linked as a consumer to
15000000.apps-smmu
[ 1.059662] iommu: Adding device soc:apps_iommu_test_device to group 9
[ 1.059781] iommu-debug soc:apps_iommu_coherent_test_device: Linked as a
consumer to 15000000.apps-smmu
[ 1.059796] iommu: Adding device soc:apps_iommu_coherent_test_device to group 10
[ 1.062799] brd: module loaded
[ 1.065418] loop: module loaded
[ 1.065487] ExtM: Added device: zram0
[ 1.066049] QSEECOM: qseecom_init_control: qseecom.qsee_version = 0x1402000
[ 1.066085] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
[ 1.067230] QSEECOM: qseecom_register_heap_shmbridge: Could not get heap 26
info: No shmbridge created
[ 1.067576] testing_mode_probe enter
[ 1.067844] testing-mode soc:testing_mode: testing_threaded_irq triggered
[ 1.068008] qce 1de0000.qcedev: Linked as a consumer to 15000000.apps-smmu
[ 1.068201] iommu: Adding device 1de0000.qcedev to group 11
[ 1.068307] register_client_adhoc:find path.src 125 dest 512
[ 1.068438] register_client_adhoc:Client handle 17 qcedev-noc
[ 1.068555] QCE50: __qce_get_device_tree_data: CE operating frequency is not
defined, setting to default 100MHZ
[ 1.068719] qce 1de0000.qcedev: QTI Crypto 5.5.1 device found @0x1de0000
[ 1.068818] sps:BAM 0x0000000001dc4000 is registered.
[ 1.068876] sps:BAM 0x0000000001dc4000 (va:0x00000000c4521531) enabled:
ver:0x27, number of pipes:16
[ 1.068957] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 16
[ 1.069227] qce 1de0000.qcedev:qcom_cedev_ns_cb: Linked as a consumer to
15000000.apps-smmu
[ 1.069433] iommu: Adding device 1de0000.qcedev:qcom_cedev_ns_cb to group 12
[ 1.069626] qce 1de0000.qcedev:qcom_cedev_s_cb: Linked as a consumer to
15000000.apps-smmu
[ 1.070082] iommu: Adding device 1de0000.qcedev:qcom_cedev_s_cb to group 13
[ 1.070673] qcrypto 1de0000.qcrypto: Linked as a consumer to 15000000.apps-smmu
[ 1.070825] iommu: Adding device 1de0000.qcrypto to group 14
[ 1.070899] register_client_adhoc:find path.src 125 dest 512
[ 1.071025] register_client_adhoc:Client handle 18 qcrypto-noc
[ 1.071120] QCE50: __qce_get_device_tree_data: CE operating frequency is not
defined, setting to default 100MHZ
[ 1.071287] qcrypto 1de0000.qcrypto: QTI Crypto 5.5.1 device found @0x1de0000
[ 1.071400] QCE50: qce_sps_init: QTI MSM CE-BAM at 0x0000000001dc4000 irq 16
[ 1.071601] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
[ 1.071711] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
[ 1.071799] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
[ 1.071897] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
[ 1.071984] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
[ 1.072103] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
[ 1.072194] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
[ 1.072282] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
[ 1.072368] qcrypto 1de0000.qcrypto: qcrypto-sha1
[ 1.072455] qcrypto 1de0000.qcrypto: qcrypto-sha256
[ 1.072542] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
[ 1.072631] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
[ 1.072718] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
[ 1.072807] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
[ 1.072894] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
[ 1.072981] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
[ 1.073068] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
[ 1.073155] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
[ 1.073241] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
[ 1.073333] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
[ 1.074000] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find
vccq-supply regulator, assuming enabled
[ 1.074059] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.45
[ 1.074172] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.37
[ 1.074184] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.16
[ 1.074911] register_client_adhoc:find path.src 123 dest 512
[ 1.075040] register_client_adhoc:find path.src 1 dest 757
[ 1.075114] register_client_adhoc:Client handle 19 ufshc_mem
[ 1.075136] ufshcd-qcom 1d84000.ufshc: Linked as a consumer to regulator.26
[ 1.075163] ufs_qcom_phy_qmp_v3 1d87000.ufsphy_mem: Linked as a consumer to
regulator.26
[ 1.075177] ufs_qcom_phy_qmp_v3 1d87000.ufsphy_mem: Linked as a consumer to
regulator.22
[ 1.075291] ufshcd-qcom 1d84000.ufshc: ufs_qcom_parse_reg_info: Unable to find
qcom,vccq-parent-supply regulator, assuming enabled
[ 1.075984] scsi host0: ufshcd
[ 1.088440] SCSI Media Changer driver v0.25
[ 1.089190] register_client_adhoc:find path.src 177 dest 824
[ 1.089216] register_client_adhoc:find path.src 152 dest 512
[ 1.089334] register_client_adhoc:Client handle 20 9c0000.qcom,qupv3_1_geni_se
[ 1.089560] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 1.090039] libphy: Fixed MDIO Bus: probed
[ 1.090042] tun: Universal TUN/TAP device driver, 1.6
[ 1.090089] PPP generic driver version 2.4.2
[ 1.090108] PPP BSD Compression module registered
[ 1.090110] PPP Deflate Compression module registered
[ 1.090128] PPP MPPE Compression module registered
[ 1.090130] NET: Registered protocol family 24
[ 1.090135] PPTP driver version 0.8.5
[ 1.090262] CLD80211: Initializing
[ 1.090286] usbcore: registered new interface driver r8152
[ 1.092863] msm_sharedmem: msm_sharedmem_probe: Device created for client
'rmtfs'
[ 1.093531] msm-qusb-phy-v2 88e3000.qusb: Linked as a consumer to regulator.22
[ 1.093556] msm-qusb-phy-v2 88e3000.qusb: Linked as a consumer to regulator.8
[ 1.093568] msm-qusb-phy-v2 88e3000.qusb: Linked as a consumer to regulator.7
[ 1.093581] msm-qusb-phy-v2 88e3000.qusb: Linked as a consumer to regulator.26
[ 1.094476] msm-dwc3 a600000.ssusb: Linked as a consumer to 15000000.apps-smmu
[ 1.094746] iommu: Adding device a600000.ssusb to group 15
[ 1.094848] msm-dwc3 a600000.ssusb: Linked as a consumer to regulator.46
[ 1.095488] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
[ 1.095536] dwc3 a600000.dwc3: changing max_speed on rev 00000000
[ 1.096067] testing-mode soc:testing_mode: Update testing mode status: 0
[ 1.096306] register_client_adhoc:find path.src 61 dest 512
[ 1.096435] register_client_adhoc:find path.src 61 dest 676
[ 1.096501] register_client_adhoc:find path.src 1 dest 583
[ 1.096577] register_client_adhoc:Client handle 21 usb0
[ 1.097708] msm-dwc3 a600000.ssusb: Dropping the link to regulator.46
[ 1.098122] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.098131] ehci-pci: EHCI PCI platform driver
[ 1.098141] ehci-platform: EHCI generic platform driver
[ 1.098315] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.098320] ohci-pci: OHCI PCI platform driver
[ 1.098333] ohci-platform: OHCI generic platform driver
[ 1.098681] usbcore: registered new interface driver usb-storage
[ 1.098691] usbcore: registered new interface driver usb_ehset_test
[ 1.098697] usbcore: registered new interface driver lvs
[ 1.099038] qpnp-pdphy c440000.qcom,spmi:qcom,pm7250b@2:qcom,usb-pdphy@1700:
Linked as a consumer to regulator.8
[ 1.099664] qpnp-pdphy c440000.qcom,spmi:qcom,pm7250b@2:qcom,usb-pdphy@1700:
usbpd_create failed: -517
[ 1.099749] qpnp-pdphy c440000.qcom,spmi:qcom,pm7250b@2:qcom,usb-pdphy@1700:
Dropping the link to regulator.8
[ 1.099906] usbcore: registered new interface driver xpad
[ 1.099913] usbcore: registered new interface driver usb_acecad
[ 1.099919] usbcore: registered new interface driver aiptek
[ 1.099924] usbcore: registered new interface driver gtco
[ 1.099929] usbcore: registered new interface driver hanwang
[ 1.099935] usbcore: registered new interface driver kbtab
[ 1.099937] [TP_SPI]: Start register spi for tp
[ 1.099951] [TP_SPI]: Start probe
[ 1.099954] [TP_SPI]: init ts_xsfer device successful
[ 1.100134] gf_platform: gf::irq_gpio:1141
[ 1.100172] input: uinput-goodix as /devices/virtual/input/input1
[ 1.100220] gf_spi: version V1.2.01
[ 1.100249] gf_spi: status = 0x0
[ 1.100399] fpc1020 soc:fingerprint_fpc: fpc fpc1020_probe --->: enter!
[ 1.100416] fpc1020 soc:fingerprint_fpc: found pin control fpc1020_reset_reset
[ 1.100418] fpc1020 soc:fingerprint_fpc: found pin control fpc1020_reset_active
[ 1.100450] fpc1020 soc:fingerprint_fpc: fpc reset_gpio_res --->: enter!
[ 1.100452] fpc1020 soc:fingerprint_fpc: fpc reset_gpio_res <---: exit!
[ 1.100457] fpc1020 soc:fingerprint_fpc: fpc1020_probe: GPIO 17 wake set
success!
[ 1.100459] fpc1020 soc:fingerprint_fpc: fpc1020_probe: ok
[ 1.100461] fpc1020 soc:fingerprint_fpc: fpc fpc1020_probe <---: exit!
[ 1.100476] fpc1020_tee: fpc1020_init OK
[ 1.100479] aw8624_i2c_init: aw8624 driver version v1.0.0
[ 1.100698] rtc-pm8xxx c440000.qcom,spmi:qcom,pmk8350@6:rtc@6100: rtc core:
registered pm8xxx_rtc as rtc0
[ 1.100738] rtc-pm8xxx c440000.qcom,spmi:qcom,pmk8350@6:rtc@6100: setting system
clock to 1971-10-21 14:08:53 UTC (56902133)
[ 1.100934] i2c /dev entries driver
[ 1.101089] i2c_geni 984000.i2c: Bus frequency is set to 400000Hz
[ 1.101459] i2c_geni 988000.i2c: Bus frequency is set to 400000Hz
[ 1.101670] i2c_geni 990000.i2c: Multi-EE usecase
[ 1.101673] i2c_geni 990000.i2c: Bus frequency is set to 400000Hz
[ 1.101931] nq-nci 1-0028: nqx_probe: enter
[ 1.101939] nq-nci 1-0028: nfc_parse_dt : Enter
[ 1.101964] nq-nci 1-0028: ese GPIO <OPTIONAL> error getting from OF node
[ 1.101970] nq-nci 1-0028: error reading NFC VDDIO min and max value
[ 1.101975] nq-nci 1-0028: error reading NFC current value
[ 1.101985] nq-nci 1-0028: nfc_parse_dt : irq:1133, ven:1130, firm:1132,
clkreq:1131
[ 1.102016] nq-nci 1-0028: nqx_probe: ese gpio not provided
[ 1.102127] nq-nci 1-0028: nfc_ldo_config: regulator entry not present
[ 1.102134] nq-nci 1-0028: nfcc_hw_check: - reset NFCC 1 - pull down and pull up
VEN
[ 1.105908] PMIC@SID0: PM8008 v1.0 options: 0, 0, 0, 0
[ 1.106752] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1,
1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[ 1.110237] I2C PMIC: i2c_pmic_probe: I2C PMIC probe successful
[ 1.112938] qcom,pm8008-regulator 990000.i2c:qcom,pm8008@9:qcom,pm8008-
regulator: Linked as a consumer to regulator.30
[ 1.112954] qcom,pm8008-regulator 990000.i2c:qcom,pm8008@9:qcom,pm8008-
regulator: Linked as a consumer to regulator.67
[ 1.115925] qcom,pm8008-regulator 990000.i2c:qcom,pm8008@9:qcom,pm8008-
regulator: Linked as a consumer to regulator.42
[ 1.120349] qcom,pm8008-regulator 990000.i2c:qcom,pm8008@9:qcom,pm8008-
regulator: Linked as a consumer to regulator.2
[ 1.120617] pm8008_l6: Bringing 2800000uV into 1800000-1800000uV
[ 1.124113] I2C PMIC: i2c_pmic_probe: I2C PMIC probe successful
[ 1.185800] PMIC@SID0: (null) v2.0 options: 0, 0, 0, 0
[ 1.186227] I2C PMIC: i2c_pmic_probe: I2C PMIC probe successful
[ 1.186437] aw8624_i2c_probe: enter
[ 1.186502] aw8624_parse_dt 2472 enter
[ 1.186519] aw8624_haptic 2-005a: aw8624_parse_dt: reset gpio provided ok
[ 1.186529] aw8624_haptic 2-005a: aw8624_parse_dt: irq gpio provided ok.
[ 1.186535] vib_mode not found
[ 1.186555] aw8624_parse_dt: ---2604 aw8624->effects_count=10
[ 1.186559] aw8624_parse_dt 2606 i=0
[ 1.186563] aw8624_parse_dt 2608 i=1
[ 1.186567] aw8624_parse_dt: effect_id: 0
[ 1.186571] aw8624_parse_dt ---2616
[ 1.186575] aw8624_parse_dt: ---2624 effect->vmax_mv =3600
[ 1.186580] aw8624_parse_dt ---2635
[ 1.186585] aw8624_parse_dt: 2651 effect->pattern_length=2 effect-
>pattern=1769531264
[ 1.186589] aw8624_parse_dt ---2662 effect->play_rate_us=20000
[ 1.186593] aw8624_parse_dt: Read qcom,wf-repeat-count failed !
[ 1.186597] aw8624_parse_dt ---2677
[ 1.186601] aw8624_parse_dt: Read qcom,wf-s-repeat-count failed !
[ 1.186605] aw8624_parse_dt ---2692
[ 1.186610] aw8624_parse_dt 2606 i=1
[ 1.186614] aw8624_parse_dt 2608 i=2
[ 1.186618] aw8624_parse_dt: effect_id: 1
[ 1.186621] aw8624_parse_dt ---2616
[ 1.186625] aw8624_parse_dt: ---2624 effect->vmax_mv =3600
[ 1.186629] aw8624_parse_dt ---2635
[ 1.186634] aw8624_parse_dt: 2651 effect->pattern_length=2 effect-
>pattern=1769530496
[ 1.186639] aw8624_parse_dt ---2662 effect->play_rate_us=20000
[ 1.186643] aw8624_parse_dt: Read qcom,wf-repeat-count failed !
[ 1.186647] aw8624_parse_dt ---2677
[ 1.186650] aw8624_parse_dt: Read qcom,wf-s-repeat-count failed !
[ 1.186654] aw8624_parse_dt ---2692
[ 1.186659] aw8624_parse_dt 2606 i=2
[ 1.186663] aw8624_parse_dt 2608 i=3
[ 1.186666] aw8624_parse_dt: effect_id: 2
[ 1.186670] aw8624_parse_dt ---2616
[ 1.186674] aw8624_parse_dt: ---2624 effect->vmax_mv =3600
[ 1.186678] aw8624_parse_dt ---2635
[ 1.186683] aw8624_parse_dt: 2651 effect->pattern_length=2 effect-
>pattern=1769533056
[ 1.186687] aw8624_parse_dt ---2662 effect->play_rate_us=20000
[ 1.186691] aw8624_parse_dt: Read qcom,wf-repeat-count failed !
[ 1.186695] aw8624_parse_dt ---2677
[ 1.186699] aw8624_parse_dt: Read qcom,wf-s-repeat-count failed !
[ 1.186702] aw8624_parse_dt ---2692
[ 1.186707] aw8624_parse_dt 2606 i=3
[ 1.186711] aw8624_parse_dt 2608 i=4
[ 1.186715] aw8624_parse_dt: effect_id: 3
[ 1.186719] aw8624_parse_dt ---2616
[ 1.186723] aw8624_parse_dt: ---2624 effect->vmax_mv =3600
[ 1.186726] aw8624_parse_dt ---2635
[ 1.186731] aw8624_parse_dt: 2651 effect->pattern_length=2 effect-
>pattern=1769536896
[ 1.186736] aw8624_parse_dt ---2662 effect->play_rate_us=20000
[ 1.186739] aw8624_parse_dt: Read qcom,wf-repeat-count failed !
[ 1.186743] aw8624_parse_dt ---2677
[ 1.186747] aw8624_parse_dt: Read qcom,wf-s-repeat-count failed !
[ 1.186750] aw8624_parse_dt ---2692
[ 1.186755] aw8624_parse_dt 2606 i=4
[ 1.186759] aw8624_parse_dt 2608 i=5
[ 1.186762] aw8624_parse_dt: effect_id: 4
[ 1.186766] aw8624_parse_dt ---2616
[ 1.186770] aw8624_parse_dt: ---2624 effect->vmax_mv =3600
[ 1.186774] aw8624_parse_dt ---2635
[ 1.186779] aw8624_parse_dt: 2651 effect->pattern_length=2 effect-
>pattern=1769532288
[ 1.186783] aw8624_parse_dt ---2662 effect->play_rate_us=28000
[ 1.186787] aw8624_parse_dt: Read qcom,wf-repeat-count failed !
[ 1.186791] aw8624_parse_dt ---2677
[ 1.186794] aw8624_parse_dt: Read qcom,wf-s-repeat-count failed !
[ 1.186798] aw8624_parse_dt ---2692
[ 1.186803] aw8624_parse_dt 2606 i=5
[ 1.186807] aw8624_parse_dt 2608 i=6
[ 1.186811] aw8624_parse_dt: effect_id: 5
[ 1.186814] aw8624_parse_dt ---2616
[ 1.186818] aw8624_parse_dt: ---2624 effect->vmax_mv =3600
[ 1.186822] aw8624_parse_dt ---2635
[ 1.186827] aw8624_parse_dt: 2651 effect->pattern_length=3 effect-
>pattern=1769529472
[ 1.186831] aw8624_parse_dt ---2662 effect->play_rate_us=20000
[ 1.186835] aw8624_parse_dt: Read qcom,wf-repeat-count failed !
[ 1.186839] aw8624_parse_dt ---2677
[ 1.186842] aw8624_parse_dt: Read qcom,wf-s-repeat-count failed !
[ 1.186846] aw8624_parse_dt ---2692
[ 1.186851] aw8624_parse_dt 2606 i=6
[ 1.186855] aw8624_parse_dt 2608 i=7
[ 1.186859] aw8624_parse_dt: effect_id: 6
[ 1.186862] aw8624_parse_dt ---2616
[ 1.186866] aw8624_parse_dt: ---2624 effect->vmax_mv =3600
[ 1.186870] aw8624_parse_dt ---2635
[ 1.186875] aw8624_parse_dt: 2651 effect->pattern_length=2 effect-
>pattern=1769532800
[ 1.186879] aw8624_parse_dt ---2662 effect->play_rate_us=20000
[ 1.186883] aw8624_parse_dt: Read qcom,wf-repeat-count failed !
[ 1.186886] aw8624_parse_dt ---2677
[ 1.186890] aw8624_parse_dt: Read qcom,wf-s-repeat-count failed !
[ 1.186894] aw8624_parse_dt ---2692
[ 1.186898] aw8624_parse_dt 2606 i=7
[ 1.186902] aw8624_parse_dt 2608 i=8
[ 1.186906] aw8624_parse_dt: effect_id: 7
[ 1.186909] aw8624_parse_dt ---2616
[ 1.186913] aw8624_parse_dt: ---2624 effect->vmax_mv =3600
[ 1.186917] aw8624_parse_dt ---2635
[ 1.186922] aw8624_parse_dt: 2651 effect->pattern_length=2 effect-
>pattern=1769532032
[ 1.186927] aw8624_parse_dt ---2662 effect->play_rate_us=20000
[ 1.186931] aw8624_parse_dt: Read qcom,wf-repeat-count failed !
[ 1.186934] aw8624_parse_dt ---2677
[ 1.186938] aw8624_parse_dt: Read qcom,wf-s-repeat-count failed !
[ 1.186942] aw8624_parse_dt ---2692
[ 1.186947] aw8624_parse_dt 2606 i=8
[ 1.186950] aw8624_parse_dt 2608 i=9
[ 1.186954] aw8624_parse_dt: effect_id: 8
[ 1.186958] aw8624_parse_dt ---2616
[ 1.186962] aw8624_parse_dt: ---2624 effect->vmax_mv =3600
[ 1.186965] aw8624_parse_dt ---2635
[ 1.186970] aw8624_parse_dt: 2651 effect->pattern_length=2 effect-
>pattern=1769533312
[ 1.186974] aw8624_parse_dt ---2662 effect->play_rate_us=20000
[ 1.186978] aw8624_parse_dt: Read qcom,wf-repeat-count failed !
[ 1.186982] aw8624_parse_dt ---2677
[ 1.186986] aw8624_parse_dt: Read qcom,wf-s-repeat-count failed !
[ 1.186989] aw8624_parse_dt ---2692
[ 1.186994] aw8624_parse_dt 2606 i=9
[ 1.186998] aw8624_parse_dt 2608 i=10
[ 1.187001] aw8624_parse_dt: effect_id: 9
[ 1.187005] aw8624_parse_dt ---2616
[ 1.187009] aw8624_parse_dt: ---2624 effect->vmax_mv =3600
[ 1.187013] aw8624_parse_dt ---2635
[ 1.187017] aw8624_parse_dt: 2651 effect->pattern_length=2 effect-
>pattern=1769531008
[ 1.187022] aw8624_parse_dt ---2662 effect->play_rate_us=20000
[ 1.187026] aw8624_parse_dt: Read qcom,wf-repeat-count failed !
[ 1.187029] aw8624_parse_dt ---2677
[ 1.187033] aw8624_parse_dt: Read qcom,wf-s-repeat-count failed !
[ 1.187037] aw8624_parse_dt ---2692
[ 1.187041] aw8624_parse_dt: effect_id: 0
[ 1.187045] aw8624_parse_dt: vmax: 3600 mv
[ 1.187049] aw8624_parse_dt: play_rate: 20000 us
[ 1.187053] aw8624_parse_dt: pattern[0]: 0x3e
[ 1.187056] aw8624_parse_dt: pattern[1]: 0x3e
[ 1.187060] aw8624_parse_dt: brake_pattern[0]: 0x2
[ 1.187064] aw8624_parse_dt: brake_pattern[1]: 0x1
[ 1.187068] aw8624_parse_dt: brake_pattern[2]: 0x0
[ 1.187072] aw8624_parse_dt: brake_pattern[3]: 0x0
[ 1.187076] aw8624_parse_dt: brake_en: 0
[ 1.187080] aw8624_parse_dt: wf_repeat_n: 0
[ 1.187083] aw8624_parse_dt: wf_s_repeat_n: 0
[ 1.187087] aw8624_parse_dt: lra_auto_res_disable: 0
[ 1.187091] aw8624_parse_dt: effect_id: 1
[ 1.187094] aw8624_parse_dt: vmax: 3600 mv
[ 1.187098] aw8624_parse_dt: play_rate: 20000 us
[ 1.187102] aw8624_parse_dt: pattern[0]: 0x7e
[ 1.187106] aw8624_parse_dt: pattern[1]: 0x3e
[ 1.187110] aw8624_parse_dt: brake_pattern[0]: 0x3
[ 1.187113] aw8624_parse_dt: brake_pattern[1]: 0x1
[ 1.187117] aw8624_parse_dt: brake_pattern[2]: 0x0
[ 1.187121] aw8624_parse_dt: brake_pattern[3]: 0x0
[ 1.187125] aw8624_parse_dt: brake_en: 0
[ 1.187128] aw8624_parse_dt: wf_repeat_n: 0
[ 1.187132] aw8624_parse_dt: wf_s_repeat_n: 0
[ 1.187135] aw8624_parse_dt: lra_auto_res_disable: 0
[ 1.187139] aw8624_parse_dt: effect_id: 2
[ 1.187143] aw8624_parse_dt: vmax: 3600 mv
[ 1.187146] aw8624_parse_dt: play_rate: 20000 us
[ 1.187150] aw8624_parse_dt: pattern[0]: 0x7e
[ 1.187154] aw8624_parse_dt: pattern[1]: 0x3e
[ 1.187158] aw8624_parse_dt: brake_pattern[0]: 0x2
[ 1.187162] aw8624_parse_dt: brake_pattern[1]: 0x1
[ 1.187165] aw8624_parse_dt: brake_pattern[2]: 0x0
[ 1.187169] aw8624_parse_dt: brake_pattern[3]: 0x0
[ 1.187173] aw8624_parse_dt: brake_en: 0
[ 1.187176] aw8624_parse_dt: wf_repeat_n: 0
[ 1.187180] aw8624_parse_dt: wf_s_repeat_n: 0
[ 1.187184] aw8624_parse_dt: lra_auto_res_disable: 0
[ 1.187187] aw8624_parse_dt: effect_id: 3
[ 1.187191] aw8624_parse_dt: vmax: 3600 mv
[ 1.187195] aw8624_parse_dt: play_rate: 20000 us
[ 1.187199] aw8624_parse_dt: pattern[0]: 0x3e
[ 1.187203] aw8624_parse_dt: pattern[1]: 0x3e
[ 1.187207] aw8624_parse_dt: brake_pattern[0]: 0x2
[ 1.187211] aw8624_parse_dt: brake_pattern[1]: 0x1
[ 1.187215] aw8624_parse_dt: brake_pattern[2]: 0x0
[ 1.187219] aw8624_parse_dt: brake_pattern[3]: 0x0
[ 1.187223] aw8624_parse_dt: brake_en: 0
[ 1.187226] aw8624_parse_dt: wf_repeat_n: 0
[ 1.187230] aw8624_parse_dt: wf_s_repeat_n: 0
[ 1.187234] aw8624_parse_dt: lra_auto_res_disable: 0
[ 1.187237] aw8624_parse_dt: effect_id: 4
[ 1.187241] aw8624_parse_dt: vmax: 3600 mv
[ 1.187245] aw8624_parse_dt: play_rate: 28000 us
[ 1.187248] aw8624_parse_dt: pattern[0]: 0x3e
[ 1.187252] aw8624_parse_dt: pattern[1]: 0x3e
[ 1.187256] aw8624_parse_dt: brake_pattern[0]: 0x2
[ 1.187260] aw8624_parse_dt: brake_pattern[1]: 0x1
[ 1.187264] aw8624_parse_dt: brake_pattern[2]: 0x0
[ 1.187267] aw8624_parse_dt: brake_pattern[3]: 0x0
[ 1.187271] aw8624_parse_dt: brake_en: 0
[ 1.187275] aw8624_parse_dt: wf_repeat_n: 0
[ 1.187278] aw8624_parse_dt: wf_s_repeat_n: 0
[ 1.187282] aw8624_parse_dt: lra_auto_res_disable: 0
[ 1.187285] aw8624_parse_dt: effect_id: 5
[ 1.187289] aw8624_parse_dt: vmax: 3600 mv
[ 1.187293] aw8624_parse_dt: play_rate: 20000 us
[ 1.187297] aw8624_parse_dt: pattern[0]: 0x7e
[ 1.187301] aw8624_parse_dt: pattern[1]: 0x7e
[ 1.187305] aw8624_parse_dt: pattern[2]: 0x7e
[ 1.187309] aw8624_parse_dt: brake_pattern[0]: 0x3
[ 1.187313] aw8624_parse_dt: brake_pattern[1]: 0x3
[ 1.187316] aw8624_parse_dt: brake_pattern[2]: 0x1
[ 1.187320] aw8624_parse_dt: brake_pattern[3]: 0x0
[ 1.187324] aw8624_parse_dt: brake_en: 0
[ 1.187327] aw8624_parse_dt: wf_repeat_n: 0
[ 1.187331] aw8624_parse_dt: wf_s_repeat_n: 0
[ 1.187335] aw8624_parse_dt: lra_auto_res_disable: 0
[ 1.187338] aw8624_parse_dt: effect_id: 6
[ 1.187342] aw8624_parse_dt: vmax: 3600 mv
[ 1.187346] aw8624_parse_dt: play_rate: 20000 us
[ 1.187350] aw8624_parse_dt: pattern[0]: 0x3e
[ 1.187353] aw8624_parse_dt: pattern[1]: 0x3e
[ 1.187357] aw8624_parse_dt: brake_pattern[0]: 0x2
[ 1.187361] aw8624_parse_dt: brake_pattern[1]: 0x1
[ 1.187365] aw8624_parse_dt: brake_pattern[2]: 0x0
[ 1.187369] aw8624_parse_dt: brake_pattern[3]: 0x0
[ 1.187373] aw8624_parse_dt: brake_en: 0
[ 1.187377] aw8624_parse_dt: wf_repeat_n: 0
[ 1.187380] aw8624_parse_dt: wf_s_repeat_n: 0
[ 1.187384] aw8624_parse_dt: lra_auto_res_disable: 0
[ 1.187388] aw8624_parse_dt: effect_id: 7
[ 1.187391] aw8624_parse_dt: vmax: 3600 mv
[ 1.187395] aw8624_parse_dt: play_rate: 20000 us
[ 1.187399] aw8624_parse_dt: pattern[0]: 0x3e
[ 1.187402] aw8624_parse_dt: pattern[1]: 0x3e
[ 1.187406] aw8624_parse_dt: brake_pattern[0]: 0x2
[ 1.187410] aw8624_parse_dt: brake_pattern[1]: 0x1
[ 1.187414] aw8624_parse_dt: brake_pattern[2]: 0x0
[ 1.187418] aw8624_parse_dt: brake_pattern[3]: 0x0
[ 1.187421] aw8624_parse_dt: brake_en: 0
[ 1.187425] aw8624_parse_dt: wf_repeat_n: 0
[ 1.187428] aw8624_parse_dt: wf_s_repeat_n: 0
[ 1.187432] aw8624_parse_dt: lra_auto_res_disable: 0
[ 1.187436] aw8624_parse_dt: effect_id: 8
[ 1.187439] aw8624_parse_dt: vmax: 3600 mv
[ 1.187443] aw8624_parse_dt: play_rate: 20000 us
[ 1.187447] aw8624_parse_dt: pattern[0]: 0x3e
[ 1.187451] aw8624_parse_dt: pattern[1]: 0x3e
[ 1.187455] aw8624_parse_dt: brake_pattern[0]: 0x2
[ 1.187459] aw8624_parse_dt: brake_pattern[1]: 0x1
[ 1.187463] aw8624_parse_dt: brake_pattern[2]: 0x0
[ 1.187467] aw8624_parse_dt: brake_pattern[3]: 0x0
[ 1.187470] aw8624_parse_dt: brake_en: 0
[ 1.187474] aw8624_parse_dt: wf_repeat_n: 0
[ 1.187478] aw8624_parse_dt: wf_s_repeat_n: 0
[ 1.187482] aw8624_parse_dt: lra_auto_res_disable: 0
[ 1.187485] aw8624_parse_dt: effect_id: 9
[ 1.187489] aw8624_parse_dt: vmax: 3600 mv
[ 1.187492] aw8624_parse_dt: play_rate: 20000 us
[ 1.187496] aw8624_parse_dt: pattern[0]: 0x3e
[ 1.187500] aw8624_parse_dt: pattern[1]: 0x3e
[ 1.187504] aw8624_parse_dt: brake_pattern[0]: 0x2
[ 1.187508] aw8624_parse_dt: brake_pattern[1]: 0x1
[ 1.187511] aw8624_parse_dt: brake_pattern[2]: 0x0
[ 1.187515] aw8624_parse_dt: brake_pattern[3]: 0x0
[ 1.187519] aw8624_parse_dt: brake_en: 0
[ 1.187523] aw8624_parse_dt: wf_repeat_n: 0
[ 1.187527] aw8624_parse_dt: wf_s_repeat_n: 0
[ 1.187530] aw8624_parse_dt: lra_auto_res_disable: 0
[ 1.187534] aw8624_parse_dt: aw8624->effects_count: 10
[ 1.187538] aw8624_parse_dt: aw8624->effect_id_boundary: 10
[ 1.187541] aw8624_parse_dt: aw8624->effect_max: 170
[ 1.187545] aw8624_parse_dt: aw8624->info.cont_drv_lvl: 106
[ 1.187549] aw8624_parse_dt: aw8624->info.cont_drv_lvl_ov: 155
[ 1.187552] aw8624_parse_dt: aw8624->info.gain_flag: 1
[ 1.187556] aw8624_parse_dt: aw8624->info.trig_config[0][0]: 0
[ 1.187560] aw8624_parse_dt: aw8624->info.trig_config[0][1]: 0
[ 1.187565] aw8624_parse_dt: aw8624->info.trig_config[0][2]: 0
[ 1.187568] aw8624_parse_dt: aw8624->info.trig_config[0][3]: 0
[ 1.187572] aw8624_parse_dt: aw8624->info.trig_config[0][4]: 0
[ 1.187576] aw8624_parse_dt: aw8624->info.trig_config[1][0]: 0
[ 1.187580] aw8624_parse_dt: aw8624->info.trig_config[1][1]: 0
[ 1.187584] aw8624_parse_dt: aw8624->info.trig_config[1][2]: 0
[ 1.187588] aw8624_parse_dt: aw8624->info.trig_config[1][3]: 0
[ 1.187592] aw8624_parse_dt: aw8624->info.trig_config[1][4]: 0
[ 1.187596] aw8624_parse_dt: aw8624->info.trig_config[2][0]: 0
[ 1.187599] aw8624_parse_dt: aw8624->info.trig_config[2][1]: 0
[ 1.187603] aw8624_parse_dt: aw8624->info.trig_config[2][2]: 0
[ 1.187607] aw8624_parse_dt: aw8624->info.trig_config[2][3]: 0
[ 1.187611] aw8624_parse_dt: aw8624->info.trig_config[2][4]: 0
[ 1.187615] aw8624_parse_dt: aw8624->info.rtp_time[0]: 20
[ 1.187619] aw8624_parse_dt: aw8624->info.rtp_time[1]: 20
[ 1.187623] aw8624_parse_dt: aw8624->info.rtp_time[2]: 20
[ 1.187627] aw8624_parse_dt: aw8624->info.rtp_time[3]: 20
[ 1.187630] aw8624_parse_dt: aw8624->info.rtp_time[4]: 40
[ 1.187634] aw8624_parse_dt: aw8624->info.rtp_time[5]: 20
[ 1.187638] aw8624_parse_dt: aw8624->info.rtp_time[6]: 20
[ 1.187642] aw8624_parse_dt: aw8624->info.rtp_time[7]: 20
[ 1.187645] aw8624_parse_dt: aw8624->info.rtp_time[8]: 20
[ 1.187649] aw8624_parse_dt: aw8624->info.rtp_time[9]: 20
[ 1.187653] aw8624_parse_dt: aw8624->info.rtp_time[10]: 20
[ 1.187657] aw8624_parse_dt: aw8624->info.rtp_time[11]: 20
[ 1.187661] aw8624_parse_dt: aw8624->info.rtp_time[12]: 20
[ 1.187665] aw8624_parse_dt: aw8624->info.rtp_time[13]: 20
[ 1.187669] aw8624_parse_dt: aw8624->info.rtp_time[14]: 20
[ 1.187673] aw8624_parse_dt: aw8624->info.rtp_time[15]: 20
[ 1.187677] aw8624_parse_dt: aw8624->info.rtp_time[16]: 20
[ 1.187681] aw8624_parse_dt: aw8624->info.rtp_time[17]: 20
[ 1.187685] aw8624_parse_dt: aw8624->info.rtp_time[18]: 20
[ 1.187689] aw8624_parse_dt: aw8624->info.rtp_time[19]: 20
[ 1.187693] aw8624_parse_dt: aw8624->info.rtp_time[20]: 20
[ 1.187697] aw8624_parse_dt: aw8624->info.rtp_time[21]: 24058
[ 1.187701] aw8624_parse_dt: aw8624->info.rtp_time[22]: 11520
[ 1.187705] aw8624_parse_dt: aw8624->info.rtp_time[23]: 14770
[ 1.187708] aw8624_parse_dt: aw8624->info.rtp_time[24]: 40341
[ 1.187712] aw8624_parse_dt: aw8624->info.rtp_time[25]: 22060
[ 1.187716] aw8624_parse_dt: aw8624->info.rtp_time[26]: 16745
[ 1.187720] aw8624_parse_dt: aw8624->info.rtp_time[27]: 15166
[ 1.187724] aw8624_parse_dt: aw8624->info.rtp_time[28]: 10590
[ 1.187728] aw8624_parse_dt: aw8624->info.rtp_time[29]: 17260
[ 1.187732] aw8624_parse_dt: aw8624->info.rtp_time[30]: 16923
[ 1.187736] aw8624_parse_dt: aw8624->info.rtp_time[31]: 16000
[ 1.187740] aw8624_parse_dt: aw8624->info.rtp_time[32]: 9920
[ 1.187744] aw8624_parse_dt: aw8624->info.rtp_time[33]: 14420
[ 1.187748] aw8624_parse_dt: aw8624->info.rtp_time[34]: 12000
[ 1.187751] aw8624_parse_dt: aw8624->info.rtp_time[35]: 18000
[ 1.187755] aw8624_parse_dt: aw8624->info.rtp_time[36]: 7860
[ 1.187759] aw8624_parse_dt: aw8624->info.rtp_time[37]: 19400
[ 1.187763] aw8624_parse_dt: aw8624->info.rtp_time[38]: 12600
[ 1.187767] aw8624_parse_dt: aw8624->info.rtp_time[39]: 31992
[ 1.187771] aw8624_parse_dt: aw8624->info.rtp_time[40]: 18581
[ 1.187774] aw8624_parse_dt: aw8624->info.rtp_time[41]: 30093
[ 1.187778] aw8624_parse_dt: aw8624->info.rtp_time[42]: 39836
[ 1.187782] aw8624_parse_dt: aw8624->info.rtp_time[43]: 19500
[ 1.187786] aw8624_parse_dt: aw8624->info.rtp_time[44]: 8530
[ 1.187790] aw8624_parse_dt: aw8624->info.rtp_time[45]: 9692
[ 1.187794] aw8624_parse_dt: aw8624->info.rtp_time[46]: 2000
[ 1.187798] aw8624_parse_dt: aw8624->info.rtp_time[47]: 16820
[ 1.187802] aw8624_parse_dt: aw8624->info.rtp_time[48]: 18782
[ 1.187806] aw8624_parse_dt: aw8624->info.rtp_time[49]: 14223
[ 1.187810] aw8624_parse_dt: aw8624->info.rtp_time[50]: 1034
[ 1.187813] aw8624_parse_dt: aw8624->info.rtp_time[51]: 1161
[ 1.187817] aw8624_parse_dt: aw8624->info.rtp_time[52]: 2096
[ 1.187821] aw8624_parse_dt: aw8624->info.rtp_time[53]: 874
[ 1.187825] aw8624_parse_dt: aw8624->info.rtp_time[54]: 1606
[ 1.187829] aw8624_parse_dt: aw8624->info.rtp_time[55]: 795
[ 1.187833] aw8624_parse_dt: aw8624->info.rtp_time[56]: 1788
[ 1.187837] aw8624_parse_dt: aw8624->info.rtp_time[57]: 859
[ 1.187840] aw8624_parse_dt: aw8624->info.rtp_time[58]: 1260
[ 1.187844] aw8624_parse_dt: aw8624->info.rtp_time[59]: 1668
[ 1.187848] aw8624_parse_dt: aw8624->info.rtp_time[60]: 2254
[ 1.187852] aw8624_parse_dt: aw8624->info.rtp_time[61]: 1852
[ 1.187856] aw8624_parse_dt: aw8624->info.rtp_time[62]: 5126
[ 1.187860] aw8624_parse_dt: aw8624->info.rtp_time[63]: 1931
[ 1.187864] aw8624_parse_dt: aw8624->info.rtp_time[64]: 1204
[ 1.187868] aw8624_parse_dt: aw8624->info.rtp_time[65]: 890
[ 1.187871] aw8624_parse_dt: aw8624->info.rtp_time[66]: 1803
[ 1.187875] aw8624_parse_dt: aw8624->info.rtp_time[67]: 1822
[ 1.187879] aw8624_parse_dt: aw8624->info.rtp_time[68]: 1325
[ 1.187883] aw8624_parse_dt: aw8624->info.rtp_time[69]: 2607
[ 1.187887] aw8624_parse_dt: aw8624->info.rtp_time[70]: 1015
[ 1.187891] aw8624_parse_dt: aw8624->info.rtp_time[71]: 890
[ 1.187895] aw8624_parse_dt: aw8624->info.rtp_time[72]: 208
[ 1.187899] aw8624_parse_dt: aw8624->info.rtp_time[73]: 676
[ 1.187902] aw8624_parse_dt: aw8624->info.rtp_time[74]: 679
[ 1.187906] aw8624_parse_dt: aw8624->info.rtp_time[75]: 850
[ 1.187910] aw8624_parse_dt: aw8624->info.rtp_time[76]: 357
[ 1.187914] aw8624_parse_dt: aw8624->info.rtp_time[77]: 380
[ 1.187918] aw8624_parse_dt: aw8624->info.rtp_time[78]: 1140
[ 1.187922] aw8624_parse_dt: aw8624->info.rtp_time[79]: 457
[ 1.187926] aw8624_parse_dt: aw8624->info.rtp_time[80]: 1176
[ 1.187930] aw8624_parse_dt: aw8624->info.rtp_time[81]: 1400
[ 1.187934] aw8624_parse_dt: aw8624->info.rtp_time[82]: 328
[ 1.187938] aw8624_parse_dt: aw8624->info.rtp_time[83]: 1500
[ 1.187942] aw8624_parse_dt: aw8624->info.rtp_time[84]: 100
[ 1.187946] aw8624_parse_dt: aw8624->info.rtp_time[85]: 150
[ 1.187950] aw8624_parse_dt: aw8624->info.rtp_time[86]: 100
[ 1.187953] aw8624_parse_dt: aw8624->info.rtp_time[87]: 341
[ 1.187957] aw8624_parse_dt: aw8624->info.rtp_time[88]: 100
[ 1.187961] aw8624_parse_dt: aw8624->info.rtp_time[89]: 249
[ 1.187965] aw8624_parse_dt: aw8624->info.rtp_time[90]: 704
[ 1.187969] aw8624_parse_dt: aw8624->info.rtp_time[91]: 100
[ 1.187973] aw8624_parse_dt: aw8624->info.rtp_time[92]: 1000
[ 1.187977] aw8624_parse_dt: aw8624->info.rtp_time[93]: 479
[ 1.187980] aw8624_parse_dt: aw8624->info.rtp_time[94]: 100
[ 1.187984] aw8624_parse_dt: aw8624->info.rtp_time[95]: 1
[ 1.187988] aw8624_parse_dt: aw8624->info.rtp_time[96]: 1089
[ 1.187992] aw8624_parse_dt: aw8624->info.rtp_time[97]: 1
[ 1.187996] aw8624_parse_dt: aw8624->info.rtp_time[98]: 2103
[ 1.187999] aw8624_parse_dt: aw8624->info.rtp_time[99]: 1
[ 1.188003] aw8624_parse_dt: aw8624->info.rtp_time[100]: 1
[ 1.188007] aw8624_parse_dt: aw8624->info.rtp_time[101]: 620
[ 1.188011] aw8624_parse_dt: aw8624->info.rtp_time[102]: 100
[ 1.188035] aw8624_parse_dt: aw8624->info.rtp_time[103]: 466
[ 1.188039] aw8624_parse_dt: aw8624->info.rtp_time[104]: 178
[ 1.188043] aw8624_parse_dt: aw8624->info.rtp_time[105]: 1
[ 1.188047] aw8624_parse_dt: aw8624->info.rtp_time[106]: 100
[ 1.188051] aw8624_parse_dt: aw8624->info.rtp_time[107]: 785
[ 1.188055] aw8624_parse_dt: aw8624->info.rtp_time[108]: 124
[ 1.188059] aw8624_parse_dt: aw8624->info.rtp_time[109]: 140
[ 1.188063] aw8624_parse_dt: aw8624->info.rtp_time[110]: 414
[ 1.188067] aw8624_parse_dt: aw8624->info.rtp_time[111]: 97
[ 1.188071] aw8624_parse_dt: aw8624->info.rtp_time[112]: 39
[ 1.188075] aw8624_parse_dt: aw8624->info.rtp_time[113]: 462
[ 1.188079] aw8624_parse_dt: aw8624->info.rtp_time[114]: 165
[ 1.188082] aw8624_parse_dt: aw8624->info.rtp_time[115]: 152
[ 1.188086] aw8624_parse_dt: aw8624->info.rtp_time[116]: 295
[ 1.188090] aw8624_parse_dt: aw8624->info.rtp_time[117]: 1
[ 1.188094] aw8624_parse_dt: aw8624->info.rtp_time[118]: 64
[ 1.188098] aw8624_parse_dt: aw8624->info.rtp_time[119]: 4088
[ 1.188102] aw8624_parse_dt: aw8624->info.rtp_time[120]: 965
[ 1.188107] aw8624_parse_dt: aw8624->info.rtp_time[121]: 931
[ 1.188110] aw8624_parse_dt: aw8624->info.rtp_time[122]: 308
[ 1.188115] aw8624_parse_dt: aw8624->info.rtp_time[123]: 3584
[ 1.188118] aw8624_parse_dt: aw8624->info.rtp_time[124]: 4583
[ 1.188122] aw8624_parse_dt: aw8624->info.rtp_time[125]: 4289
[ 1.188126] aw8624_parse_dt: aw8624->info.rtp_time[126]: 100
[ 1.188130] aw8624_parse_dt: aw8624->info.rtp_time[127]: 70
[ 1.188134] aw8624_parse_dt: aw8624->info.rtp_time[128]: 1
[ 1.188138] aw8624_parse_dt: aw8624->info.rtp_time[129]: 1656
[ 1.188142] aw8624_parse_dt: aw8624->info.rtp_time[130]: 89
[ 1.188146] aw8624_parse_dt: aw8624->info.rtp_time[131]: 56
[ 1.188149] aw8624_parse_dt: aw8624->info.rtp_time[132]: 76
[ 1.188153] aw8624_parse_dt: aw8624->info.rtp_time[133]: 56
[ 1.188157] aw8624_parse_dt: aw8624->info.rtp_time[134]: 51
[ 1.188161] aw8624_parse_dt: aw8624->info.rtp_time[135]: 681
[ 1.188165] aw8624_parse_dt: aw8624->info.rtp_time[136]: 1
[ 1.188169] aw8624_parse_dt: aw8624->info.rtp_time[137]: 36
[ 1.188173] aw8624_parse_dt: aw8624->info.rtp_time[138]: 1
[ 1.188177] aw8624_parse_dt: aw8624->info.rtp_time[139]: 1
[ 1.188181] aw8624_parse_dt: aw8624->info.rtp_time[140]: 83
[ 1.188185] aw8624_parse_dt: aw8624->info.rtp_time[141]: 129
[ 1.188188] aw8624_parse_dt: aw8624->info.rtp_time[142]: 216
[ 1.188192] aw8624_parse_dt: aw8624->info.rtp_time[143]: 87
[ 1.188196] aw8624_parse_dt: aw8624->info.rtp_time[144]: 128
[ 1.188200] aw8624_parse_dt: aw8624->info.rtp_time[145]: 215
[ 1.188204] aw8624_parse_dt: aw8624->info.rtp_time[146]: 227
[ 1.188208] aw8624_parse_dt: aw8624->info.rtp_time[147]: 534
[ 1.188212] aw8624_parse_dt: aw8624->info.rtp_time[148]: 312
[ 1.188216] aw8624_parse_dt: aw8624->info.rtp_time[149]: 90
[ 1.188220] aw8624_parse_dt: aw8624->info.rtp_time[150]: 299
[ 1.188224] aw8624_parse_dt: aw8624->info.rtp_time[151]: 1109
[ 1.188227] aw8624_parse_dt: aw8624->info.rtp_time[152]: 686
[ 1.188231] aw8624_parse_dt: aw8624->info.rtp_time[153]: 395
[ 1.188235] aw8624_parse_dt: aw8624->info.rtp_time[154]: 10500
[ 1.188239] aw8624_parse_dt: aw8624->info.rtp_time[155]: 5648
[ 1.188243] aw8624_parse_dt: aw8624->info.rtp_time[156]: 6708
[ 1.188247] aw8624_parse_dt: aw8624->info.rtp_time[157]: 618
[ 1.188250] aw8624_parse_dt: aw8624->info.rtp_time[158]: 749
[ 1.188254] aw8624_parse_dt: aw8624->info.rtp_time[159]: 701
[ 1.188258] aw8624_parse_dt: aw8624->info.rtp_time[160]: 814
[ 1.188262] aw8624_parse_dt: aw8624->info.rtp_time[161]: 2610
[ 1.188266] aw8624_parse_dt: aw8624->info.rtp_time[162]: 200
[ 1.188270] aw8624_parse_dt: aw8624->info.rtp_time[163]: 200
[ 1.188274] aw8624_parse_dt: aw8624->info.rtp_time[164]: 300
[ 1.188278] aw8624_parse_dt: aw8624->info.rtp_time[165]: 200
[ 1.188281] aw8624_parse_dt: aw8624->info.rtp_time[166]: 200
[ 1.188285] aw8624_parse_dt: aw8624->info.rtp_time[167]: 300
[ 1.188289] aw8624_parse_dt: aw8624->info.rtp_time[168]: 200
[ 1.188293] aw8624_parse_dt: aw8624->info.rtp_time[169]: 200
[ 1.188297] aw8624_parse_dt: aw8624->info.rtp_time[170]: 300
[ 1.188301] aw8624_parse_dt: aw8624->info.rtp_time[171]: 516
[ 1.188304] aw8624_parse_dt: aw8624->info.rtp_time[172]: 286
[ 1.188308] aw8624_parse_dt: aw8624->info.rtp_time[173]: 200
[ 1.188312] aw8624_parse_dt: aw8624->info.rtp_time[174]: 200
[ 1.188316] aw8624_parse_dt: aw8624->info.parameter1: 0x1
[ 1.188320] aw8624_i2c_probe ---4226
[ 1.188393] aw8624_i2c_probe: found pin control aw8624_reset_reset
[ 1.188399] select_pin_ctl: Selected 'aw8624_interrupt_active'
[ 1.188403] aw8624_i2c_probe: found pin control aw8624_reset_active
[ 1.188407] select_pin_ctl: Selected 'aw8624_interrupt_active'
[ 1.188411] aw8624_i2c_probe: found pin control aw8624_interrupt_active
[ 1.188424] select_pin_ctl: Selected 'aw8624_interrupt_active'
[ 1.188446] select_pin_ctl: Selected 'aw8624_reset_active'
[ 1.200074] select_pin_ctl: Selected 'aw8624_reset_reset'
[ 1.212050] select_pin_ctl: Selected 'aw8624_reset_active'
[ 1.212195] i2c_geni 990000.i2c: i2c error :-107
[ 1.212204] aw8624_i2c_read: i2c_read cnt=0 error=-107
[ 1.220294] aw8624_read_chipid: aw8624 detected
[ 1.220300] aw8624_haptic_softreset: enter
[ 1.220480] nq-nci 1-0028: NQ NFCC chip_type = a4
[ 1.220487] nq-nci 1-0028: NQ fw version = 1.10.55
[ 1.220493] nq-nci 1-0028: nfcc_hw_check: ## NFCC == SN100x ##
[ 1.220498] nq-nci 1-0028: nfcc_hw_check : hw check scuessfully
[ 1.220567] nq-nci 1-0028: nqx_probe: probing NFCC NQxxx exited successfully
[ 1.228266] aw8624_interrupt_setup: reg SYSINT=0x0
[ 1.229578] aw8624_i2c_probe: aw8624_irq success.
[ 1.229707] aw8624_vibrator_init: enter
[ 1.229713] aw8624_haptic_init: enter
[ 1.234751] aw8624_haptic_f0_calibration: enter
[ 1.234902] aw8624_haptic_get_f0: enter
[ 1.234907] aw8624_haptic_stop: enter
[ 1.234909] aw8624_haptic_play_go: enter
[ 1.236391] aw8624_haptic_active: enter
[ 1.236759] aw8624_interrupt_clear: enter
[ 1.236984] aw8624_interrupt_clear: reg SYSINT=0x30
[ 1.239761] aw8624_haptic_set_f0_preset: enter
[ 1.240858] aw8624_haptic_play_go: enter
[ 1.397219] aw8624_haptic_read_f0: enter
[ 1.397640] aw8624_haptic_read_f0: f0=2041
[ 1.397642] aw8624_haptic_read_beme 895 enter
[ 1.398062] aw8624_haptic_read_beme: max_pos_beme=127
[ 1.398064] aw8624_haptic_read_beme: max_neg_beme=128
[ 1.398894] aw8624_haptic_f0_calibration line=1872 f0_cali_step=-17
[ 1.398896] aw8624_haptic_f0_calibration line=1874 f0_limit=2041
[ 1.398898] aw8624_haptic_f0_calibration line=1876 aw8624->info.f0_pre=2050
[ 1.398900] aw8624_haptic_f0_calibration 1899 aw8624->chipid_flag = 1
[ 1.398902] aw8624_haptic_f0_calibration f0_cali_lra=62
[ 1.399249] aw8624_haptic_f0_calibration: final trim_lra=0x3e
[ 1.400944] aw8624_haptic_active: enter
[ 1.401290] aw8624_interrupt_clear: enter
[ 1.401500] aw8624_interrupt_clear: reg SYSINT=0x21
[ 1.401846] aw8624_haptic_stop: enter
[ 1.401846] aw8624_haptic_play_go: enter
[ 1.402403] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 1.402613] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 1.402822] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 1.403032] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 1.403242] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 1.403451] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 1.403661] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 1.403870] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 1.404082] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 1.404300] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 1.404510] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.404719] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.404930] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.405140] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.405349] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.405558] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.405769] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.405978] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.406188] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.406397] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.406607] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.406817] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.407026] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.407235] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.407445] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.407655] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.407864] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.408076] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.408288] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.408498] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.408708] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.408917] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.409128] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.409337] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.409547] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.409756] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.409966] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.410176] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.410386] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.410595] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.410806] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.411015] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.411225] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.411434] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.411644] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.411854] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.412065] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.412276] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.412487] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.412697] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.412906] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.413116] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.413326] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.413535] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.413745] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.413955] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.414164] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.414374] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.414583] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.414793] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.415002] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.415212] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.415422] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.415631] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.415841] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.416052] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.416263] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.416473] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.416683] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.416892] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.417102] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.417311] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.417521] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.417731] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.417940] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.418150] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.418360] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.418569] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.418779] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.418989] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.419198] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.419408] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.419618] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.419827] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.420040] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.420250] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.420460] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.420670] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.420880] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.421089] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.421299] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.421508] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.421718] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.421927] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.422137] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.422346] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.422556] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.422765] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.422974] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.423184] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x03
[ 1.423184] aw8624_haptic_stop_delay: do not enter standby automatically
[ 1.425148] input: aw8624_haptic as /devices/platform/soc/990000.i2c/i2c-2/2-
005a/input/input2
[ 1.425178] aw8624_i2c_probe: probe completed successfully!
[ 1.425615] msm_npu 9900000.qcom,msm_npu: Linked as a consumer to 15000000.apps-
smmu
[ 1.425865] iommu: Adding device 9900000.qcom,msm_npu to group 16
[ 1.425980] msm_npu 9900000.qcom,msm_npu: Linked as a consumer to regulator.58
[ 1.425999] msm_npu 9900000.qcom,msm_npu: Linked as a consumer to regulator.27
[ 1.426057] register_client_adhoc:find path.src 154 dest 512
[ 1.426145] register_client_adhoc:find path.src 154 dest 620
[ 1.426239] register_client_adhoc:Client handle 21 9900000.qcom,msm_npu
[ 1.426242] NPU_INFO: npu_parse_dt_bw: 1877 NPU BW client sets up successfully
[ 1.428117] Couldn't parse device tree rc=-517
[ 1.428629] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
Couldn't parse devicetree, rc=-517
[ 1.428802] i2c_geni 990000.i2c: i2c error :-107
[ 1.428807] [bq2597x-STANDALONE]:__bq2597x_read_byte:i2c read fail: can't read
from reg 0x13
[ 1.428809] [bq2597x-STANDALONE]:bq2597x_charger_probe:No bq2597x device found!
[ 1.428832] [Onewire] onewire_gpio_init: onewire gpio init entry.
[ 1.428960] [Onewire] onewire_gpio_probe: onewire probe entry
[ 1.429001] [Onewire] onewire_gpio_probe: onewire_gpio_level_addr is f10b004;
onewire_gpio_cfg_addr is f10b000
[ 1.429004] [Onewire] onewire_gpio_probe: onewire_data->gpio_cfg66_reg is
8b0d000; onewire_data->gpio_in_out_reg is 89fd004
[ 1.429046] [ds28e16] ds28e16_init: ds28e16_init entry.
[ 1.429130] [ds28e16] ds28e16_probe: ds28e16_probe entry.
[ 1.429176] [ds28e16] verify_psy_register: batt_verify power supply register
successfully
[ 1.700095] [ds28e16] ds28el16_get_page_data_retry: flag_mi_page0_data is 1
[ 1.700098] [ds28e16] ds28el16_get_page_data_retry: mi_page0_data data:
[ 1.700101] [ds28e16] ds28el16_get_page_data_retry: 43 42 4d 34 57 30 39 4d 00
26 c1 47 4d 44 31 31
[ 1.709964] device-mapper: uevent: version 1.0.3
[ 1.710014] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-
[email protected]
[ 1.710174] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in devicetree
[ 1.710185] bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device
tree
[ 1.710187] bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device
tree
[ 1.710189] bt_dt_parse_vreg_info: qca,bt-vdd-aon: is not provided in device
tree
[ 1.710191] bt_dt_parse_vreg_info: qca,bt-vdd-dig: is not provided in device
tree
[ 1.710193] bt_dt_parse_vreg_info: qca,bt-vdd-rfa1: is not provided in device
tree
[ 1.710195] bt_dt_parse_vreg_info: qca,bt-vdd-rfa2: is not provided in device
tree
[ 1.710196] bt_dt_parse_vreg_info: qca,bt-vdd-asd: is not provided in device
tree
[ 1.710199] bt_dt_parse_clk_info: clocks is not provided in device tree
[ 1.710547] EDAC DEVICE0: Giving out device to module soc:kryo-erp controller
cache: DEV soc:kryo-erp (INTERRUPT)
[ 1.711060] sdhci: Secure Digital Host Controller Interface driver
[ 1.711062] sdhci: Copyright(c) Pierre Ossman
[ 1.711064] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.711587] usbcore: registered new interface driver usbhid
[ 1.711590] usbhid: USB HID core driver
[ 1.711641] ashmem: initialized
[ 1.711730] cam_reclaim init ok
[ 1.711805] mi_reclaim init ok
[ 1.711808] ipa_ut ipa_ut_module_init:1036 Loading IPA test module...
[ 1.711934] bimc-bwmon 90b6300.qcom,cpu-cpu-llcc-bwmon: BW HWmon governor
registered.
[ 1.711962] bimc-bwmon 90cd000.qcom,cpu-llcc-ddr-bwmon: BW HWmon governor
registered.
[ 1.712300] bimc-bwmon 60400.qcom,npu-npu-llcc-bwmon: BW HWmon governor
registered.
[ 1.712325] bimc-bwmon 90ce000.qcom,npu-llcc-ddr-bwmon: BW HWmon governor
registered.
[ 1.712405] sdhci_msm 8804000.sdhci: No vreg data found for vdd-io-bias
[ 1.712423] bimc-bwmon 70300.qcom,npudsp-npu-ddr-bwmon: BW HWmon governor
registered.
[ 1.712643] sdhci_msm 8804000.sdhci: core_reset unavailable,err = -2
[ 1.712649] sdhci_msm 8804000.sdhci: Reset data parsing error
[ 1.712825] register_client_adhoc:find path.src 81 dest 10073
[ 1.712965] register_client_adhoc:find path.src 135 dest 512
[ 1.713020] arm-memlat-mon soc:qcom,cpu0-cpugrp:qcom,cpu0-cpu-l3-latmon: Memory
Latency governor registered.
[ 1.713096] register_client_adhoc:find path.src 1 dest 608
[ 1.713113] arm-memlat-mon soc:qcom,cpu0-cpugrp:qcom,cpu0-cpu-llcc-latmon:
Memory Latency governor registered.
[ 1.713170] arm-memlat-mon soc:qcom,cpu0-cpugrp:qcom,cpu0-llcc-ddr-latmon:
Memory Latency governor registered.
[ 1.713223] arm-memlat-mon soc:qcom,cpu0-cpugrp:qcom,cpu0-computemon: Compute
governor registered.
[ 1.713288] arm-memlat-mon soc:qcom,cpu6-cpugrp:qcom,cpu6-cpu-l3-latmon: Memory
Latency governor registered.
[ 1.713299] register_client_adhoc:Client handle 22 sdhc2
[ 1.713337] arm-memlat-mon soc:qcom,cpu6-cpugrp:qcom,cpu6-cpu-llcc-latmon:
Memory Latency governor registered.
[ 1.713387] arm-memlat-mon soc:qcom,cpu6-cpugrp:qcom,cpu6-llcc-ddr-latmon:
Memory Latency governor registered.
[ 1.713435] arm-memlat-mon soc:qcom,cpu6-cpugrp:qcom,cpu6-computemon: Compute
governor registered.
[ 1.713575] sdhci_msm 8804000.sdhci: Linked as a consumer to regulator.39
[ 1.713618] sdhci_msm 8804000.sdhci: Linked as a consumer to regulator.36
[ 1.713948] register_client_adhoc:find path.src 1 dest 770
[ 1.713981] register_client_adhoc:Client handle 23 soc:qcom,cpu-cpu-llcc-bw
[ 1.714353] register_client_adhoc:find path.src 129 dest 512
[ 1.714377] register_client_adhoc:Client handle 24 soc:qcom,cpu-llcc-ddr-bw
[ 1.714764] register_client_adhoc:find path.src 154 dest 770
[ 1.714805] register_client_adhoc:Client handle 25 soc:qcom,npu-npu-llcc-bw
[ 1.714998] register_client_adhoc:find path.src 770 dest 512
[ 1.715033] register_client_adhoc:Client handle 26 soc:qcom,npu-llcc-ddr-bw
[ 1.715219] register_client_adhoc:find path.src 154 dest 512
[ 1.715281] register_client_adhoc:Client handle 27 soc:qcom,npudsp-npu-ddr-bw
[ 1.715438] register_client_adhoc:find path.src 1 dest 770
[ 1.715459] register_client_adhoc:Client handle 28 soc:qcom,cpu0-cpu-llcc-lat
[ 1.715624] register_client_adhoc:find path.src 129 dest 512
[ 1.715645] register_client_adhoc:Client handle 29 soc:qcom,cpu0-llcc-ddr-lat
[ 1.715813] register_client_adhoc:find path.src 129 dest 512
[ 1.715836] register_client_adhoc:Client handle 30 soc:qcom,cpu0-cpu-ddr-
latfloor
[ 1.715965] register_client_adhoc:find path.src 1 dest 770
[ 1.715987] register_client_adhoc:Client handle 31 soc:qcom,cpu6-cpu-llcc-lat
[ 1.716158] register_client_adhoc:find path.src 129 dest 512
[ 1.716179] register_client_adhoc:Client handle 32 soc:qcom,cpu6-llcc-ddr-lat
[ 1.716349] register_client_adhoc:find path.src 129 dest 512
[ 1.716370] register_client_adhoc:Client handle 33 soc:qcom,cpu6-cpu-ddr-
latfloor
[ 1.716458] register_client_adhoc:find path.src 1 dest 627
[ 1.716530] register_client_adhoc:Client handle 34 soc:qcom,snoc_cnoc_keepalive
[ 1.716742] register_client_adhoc:find path.src 26 dest 512
[ 1.716788] register_client_adhoc:Client handle 35 soc:qcom,gpubw
[ 1.718400] qcom-llcc-pmu 90cc000.llcc-pmu: Registered llcc_pmu, type: 8
[ 1.718654] coresight-tmc 6048000.tmc: Linked as a consumer to 15000000.apps-
smmu
[ 1.718851] iommu: Adding device 6048000.tmc to group 17
[ 1.720579] coresight-stm 6002000.stm: stm_register_device failed, probing
deffered
[ 1.720610] OF: graph: no port node found in /soc/cti@78e0000
[ 1.720650] OF: graph: no port node found in /soc/cti@78f0000
[ 1.720689] OF: graph: no port node found in /soc/cti@7900000
[ 1.720727] OF: graph: no port node found in /soc/cti@6010000
[ 1.720760] OF: graph: no port node found in /soc/cti@6011000
[ 1.720794] OF: graph: no port node found in /soc/cti@601a000
[ 1.720825] OF: graph: no port node found in /soc/cti@601b000
[ 1.720858] OF: graph: no port node found in /soc/cti@601c000
[ 1.720891] OF: graph: no port node found in /soc/cti@601d000
[ 1.720924] OF: graph: no port node found in /soc/cti@601e000
[ 1.720956] OF: graph: no port node found in /soc/cti@601f000
[ 1.721018] OF: graph: no port node found in /soc/cti@6012000
[ 1.721054] OF: graph: no port node found in /soc/cti@6013000
[ 1.721087] OF: graph: no port node found in /soc/cti@6014000
[ 1.721125] OF: graph: no port node found in /soc/cti@6015000
[ 1.721157] OF: graph: no port node found in /soc/cti@6016000
[ 1.721190] OF: graph: no port node found in /soc/cti@6017000
[ 1.721225] OF: graph: no port node found in /soc/cti@6018000
[ 1.721259] OF: graph: no port node found in /soc/cti@6019000
[ 1.721292] OF: graph: no port node found in /soc/cti@6845000
[ 1.721329] OF: graph: no port node found in /soc/cti@6982000
[ 1.721365] OF: graph: no port node found in /soc/cti@698b000
[ 1.721402] OF: graph: no port node found in /soc/cti@6ac1000
[ 1.721439] OF: graph: no port node found in /soc/cti@6ac2000
[ 1.721474] OF: graph: no port node found in /soc/cti@6ac3000
[ 1.721509] OF: graph: no port node found in /soc/cti@6ac4000
[ 1.721547] OF: graph: no port node found in /soc/cti@6b00000
[ 1.721583] OF: graph: no port node found in /soc/cti@6b01000
[ 1.721618] OF: graph: no port node found in /soc/cti@6b02000
[ 1.721654] OF: graph: no port node found in /soc/cti@6b03000
[ 1.721690] OF: graph: no port node found in /soc/cti@6b0e000
[ 1.721729] OF: graph: no port node found in /soc/cti@6c09000
[ 1.721765] OF: graph: no port node found in /soc/cti@6c0a000
[ 1.721803] OF: graph: no port node found in /soc/cti@6c0b000
[ 1.721841] OF: graph: no port node found in /soc/cti@6c0c000
[ 1.721879] OF: graph: no port node found in /soc/cti@6c2a000
[ 1.721914] OF: graph: no port node found in /soc/cti@6c2b000
[ 1.721953] OF: graph: no port node found in /soc/cti@6c2c000
[ 1.721990] OF: graph: no port node found in /soc/cti@6c42000
[ 1.722029] OF: graph: no port node found in /soc/cti@6c43000
[ 1.722068] OF: graph: no port node found in /soc/cti@6c61000
[ 1.722107] OF: graph: no port node found in /soc/cti@6f82000
[ 1.722144] OF: graph: no port node found in /soc/cti@6f83000
[ 1.722185] OF: graph: no port node found in /soc/cti@6f84000
[ 1.722223] OF: graph: no port node found in /soc/cti@6f90000
[ 1.722264] OF: graph: no port node found in /soc/cti@6f91000
[ 1.722306] OF: graph: no port node found in /soc/cti@6f92000
[ 1.722348] OF: graph: no port node found in /soc/cti@7831000
[ 1.722389] OF: graph: no port node found in /soc/cti@7861000
[ 1.725240] OF: graph: no port node found in /soc/csr@6001000
[ 1.725262] coresight-csr 6001000.csr: CSR initialized: coresight-csr
[ 1.725273] OF: graph: no port node found in /soc/csr@6b0c000
[ 1.725295] coresight-csr 6b0c000.csr: CSR initialized: coresight-swao-csr
[ 1.725440] OF: graph: no port node found in /soc/hwevent
[ 1.725462] coresight-hwevent soc:hwevent: Hardware Event driver initialized
[ 1.725644] coresight-dummy soc:tpdm@6b26000: Dummy device initialized
[ 1.725695] coresight-dummy soc:tpdm@69a4000: Dummy device initialized
[ 1.725742] coresight-dummy soc:dummy_source: Dummy device initialized
[ 1.725936] coresight-remote-etm soc:audio_etm0: Remote ETM initialized
[ 1.725996] coresight-remote-etm soc:npu_etm0: Remote ETM initialized
[ 1.726052] coresight-remote-etm soc:turing_etm0: Remote ETM initialized
[ 1.726107] coresight-remote-etm soc:modem_etm0: Remote ETM initialized
[ 1.726162] coresight-remote-etm soc:modem2_etm0: Remote ETM initialized
[ 1.726229] OF: graph: no port node found in /soc/tgu@6b0b000
[ 1.726501] migt: migt_sched migt_sched_init: inited!
[ 1.726507] migt: come into cluster_core_init
[ 1.726509] migt: clus_affnity 1
[ 1.726510] migt: -0 \x09
[ 1.726511] migt: -1 \x09
[ 1.726513] migt: -2 \x09
[ 1.726514] migt: -3 \x09
[ 1.726516] migt: -4 \x09
[ 1.726517] migt: -5 \x09
[ 1.726519] migt:
[ 1.726521] migt: clus_affnity 2
[ 1.726522] migt: -0 \x09
[ 1.726523] migt: -1 \x09
[ 1.726525] migt: -2 \x09
[ 1.726526] migt: -3 \x09
[ 1.726528] migt: -4 \x09
[ 1.726529] migt: -5 \x09
[ 1.726530] migt: -6 \x09
[ 1.726532] migt: -7 \x09
[ 1.726533] migt:
[ 1.726547] nf_register_hooks(millet hooks) success
[ 1.726549] hs_register_hooks(millet hooks) success
[ 1.726589] usbcore: registered new interface driver snd-usb-audio
[ 1.726729] uaudio-qmi soc:usb_audio_qmi_dev: Linked as a consumer to
15000000.apps-smmu
[ 1.726763] iommu: Adding device soc:usb_audio_qmi_dev to group 18
[ 1.727820] register_client_adhoc:find path.src 1 dest 590
[ 1.727912] register_client_adhoc:Client handle 36 disp_rsc_reg
[ 1.727922] register_client_adhoc:find path.src 20003 dest 20513
[ 1.727978] register_client_adhoc:Client handle 37 disp_rsc_mnoc_llcc
[ 1.727986] register_client_adhoc:find path.src 20000 dest 20512
[ 1.728011] register_client_adhoc:Client handle 38 disp_rsc_ebi
[ 1.728061] sde_rsc af20000.qcom,sde_rscc: Linked as a consumer to regulator.55
[ 1.728205] [sde_rsc_hw:rsc_hw_init_v3:537]: sde rsc init successfully done
[ 1.728300] [sde_rsc:sde_rsc_probe:1594]: sde rsc index:0 probed successfully
[ 1.728574] dsi_phy ae94400.qcom,mdss_dsi_phy0: ae94400.qcom,mdss_dsi_phy0
supply gdsc not found, using dummy regulator
[ 1.728592] dsi_phy ae94400.qcom,mdss_dsi_phy0: Linked as a consumer to
regulator.0
[ 1.728605] dsi_phy ae94400.qcom,mdss_dsi_phy0: Linked as a consumer to
regulator.4
[ 1.728617] [drm:dsi_phy_driver_probe] [msm-dsi-info]: DSI_0: Probe successful
[ 1.728843] drm_dsi_ctrl ae94000.qcom,mdss_dsi0_ctrl: Linked as a consumer to
regulator.44
[ 1.728855] drm_dsi_ctrl ae94000.qcom,mdss_dsi0_ctrl: Linked as a consumer to
regulator.26
[ 1.728858] AXI: get_pdata(): Error: Client name not found
[ 1.728859] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for
successful registration
[ 1.728864] [drm:dsi_ctrl_dev_probe] [msm-dsi-info]: dsi-ctrl-0: Probe
successful
[ 1.729169] OF: graph: no port node found in /soc/qcom,dsi-display-primary
[ 1.729181] [drm] [msm-dsi-warn]: [xiaomi 36 02 0a video mode dsc dsi panel]
fallback to default te-pin-select
[ 1.729308] mi-dsi-panel:[dsi_panel_parse_mi_config:69] mi feature enabled
[ 1.729311] mi-dsi-panel:[dsi_panel_parse_mi_config:98] dimming on disable after
panel on.
[ 1.729314] mi-dsi-panel:[dsi_panel_parse_mi_config:106] fod dimlayer disabled.
[ 1.729317] mi-dsi-panel:[dsi_panel_parse_mi_config:114] nolp command set
backlight disabled.
[ 1.729320] mi-dsi-panel:[dsi_panel_parse_mi_config:121] can't get doze hbm
brightness
[ 1.729322] mi-dsi-panel:[dsi_panel_parse_mi_config:128] can't get doze lbm
brightness
[ 1.729324] mi-dsi-panel:[dsi_panel_parse_mi_config:193] panel on dimming delay
120 ms
[ 1.729327] mi-dsi-panel:[dsi_panel_parse_mi_config:200] default doze backlight
threshold is 5
[ 1.729329] mi-dsi-panel:[dsi_panel_parse_mi_config:209] default
fod_off_dimming_delay 170
[ 1.729331] mi-dsi-panel:[dsi_panel_parse_mi_config:217] panel is tddi
[ 1.729333] mi-dsi-panel:[dsi_panel_parse_mi_config:233] 0x6 0x3 enabled:1
[ 1.729335] mi-dsi-panel:[dsi_panel_parse_mi_config:239] default dc backlight
threshold is 440
[ 1.729338] mi-dsi-panel:[dsi_panel_parse_mi_config:248] default dc backlight
type is 1
[ 1.729340] mi-dsi-panel:[dsi_panel_parse_mi_config:258] send dc on command in
lp mode.
[ 1.729342] mi-dsi-panel:[dsi_panel_parse_mi_config:275] 0x6 0x4 enabled:1
[ 1.729347] hw_item_add_child: display:(null)
[ 1.729349] hw_item_add_child: panel_active:0
[ 1.729351] hw_item_add_child: panel_refresh:0
[ 1.729353] hw_item_add_child: kernel_boottime:0
[ 1.729355] hw_item_add_child: kernel_days:0
[ 1.729357] hw_item_add_child: bl_level_avg:0
[ 1.729359] hw_item_add_child: bl_level_high:0
[ 1.729360] hw_item_add_child: bl_level_low:0
[ 1.729362] hw_item_add_child: hbm_duration:0
[ 1.729364] hw_item_add_child: hbm_times:0
[ 1.729366] hw_item_add_child: 30fps_times:0
[ 1.729367] hw_item_add_child: 48fps_times:0
[ 1.729369] hw_item_add_child: 50fps_times:0
[ 1.729370] hw_item_add_child: 60fps_times:0
[ 1.729372] hw_item_add_child: 90fps_times:0
[ 1.729374] hw_item_add_child: 120fps_times:0
[ 1.729376] [LCD] dsi_panel_count_init: end
[ 1.729787] register_client_adhoc:find path.src 1 dest 590
[ 1.729880] register_client_adhoc:Client handle 39 mdss_reg
[ 1.729889] register_client_adhoc:find path.src 22 dest 512
[ 1.729959] register_client_adhoc:Client handle 40 mdss_sde
[ 1.730044] [drm:sde_dbg_init:4676] evtlog_status: enable:11, panic:1, dump:2
[ 1.730056] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,wb-display@0 (ops
sde_wb_comp_ops)
[ 1.730118] msm-dsi-display soc:qcom,dsi-display-primary: Linked as a consumer
to regulator.31
[ 1.730135] msm-dsi-display soc:qcom,dsi-display-primary: Linked as a consumer
to regulator.64
[ 1.730150] msm-dsi-display soc:qcom,dsi-display-primary: Linked as a consumer
to regulator.65
[ 1.730202] [drm:dsi_display_bind] [msm-dsi-info]: Successfully bind display
panel 'qcom,mdss_dsi_j17_36_02_0a_dsc_video'
[ 1.730281] msm_drm ae00000.qcom,mdss_mdp: bound soc:qcom,dsi-display-primary
(ops dsi_display_comp_ops)
[ 1.730285] msm_drm ae00000.qcom,mdss_mdp: bound af20000.qcom,sde_rscc (ops
sde_rsc_comp_ops)
[ 1.730303] [drm] mapped mdp address space @000000000ee0ba36
[ 1.730669] [drm:_sde_kms_hw_init_blocks:3576] sde hardware revision:0x60040000
[ 1.731256] msmdrm_smmu ae00000.qcom,mdss_mdp:qcom,smmu_sde_unsec_cb: Linked as
a consumer to 15000000.apps-smmu
[ 1.731445] iommu: Adding device ae00000.qcom,mdss_mdp:qcom,smmu_sde_unsec_cb to
group 19
[ 1.731558] [drm] probing device qcom,smmu_sde_unsec
[ 1.731561] [drm] Created domain mdp_ns, secure=0
[ 1.731971] msmdrm_smmu ae00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb: Linked as a
consumer to 15000000.apps-smmu
[ 1.732397] iommu: Adding device ae00000.qcom,mdss_mdp:qcom,smmu_sde_sec_cb to
group 20
[ 1.732503] [drm] probing device qcom,smmu_sde_sec
[ 1.732505] [drm] Created domain mdp_s, secure=1
[ 1.732903] backlight: bd_cdev_get_max_brightness: Skip thermal statistics for
big max_brightness(4095) to avoid panic
[ 1.732986] [drm:dsi_panel_get_mode] [msm-dsi-info]: default topology: lm: 1
comp_enc:1 intf: 1
[ 1.733175] [drm:sde_connector_init:2947] Request esd irq succeed!
[ 1.734090] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.734092] [drm] No driver support for vblank timestamp query.
[ 1.734314] smart_fps_init_debugfs: create debugfs for smart_fps
[ 1.734336] smart_fps_init_debugfs: only for dsi panel
[ 1.734340] [drm] Initialized msm_drm 1.3.0 20130625 for ae00000.qcom,mdss_mdp
on minor 0
[ 1.734349] [drm] cont_splash enabled in 1 of 1 display(s)
[ 1.734432] [drm:dsi_bridge_mode_set] [msm-dsi-info]: clk_rate: 819957600
[ 1.734463] [drm:dsi_ctrl_isr_configure] [msm-dsi-info]: dsi-ctrl-0: IRQ 338
registered
[ 1.746892] msm_cam_smmu soc:qcom,cam_smmu:msm_cam_smmu_lrme: Linked as a
consumer to 15000000.apps-smmu
[ 1.747099] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_lrme to group 21
[ 1.747363] msm_cam_smmu soc:qcom,cam_smmu:msm_cam_smmu_ife: Linked as a
consumer to 15000000.apps-smmu
[ 1.747530] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_ife to group 22
[ 1.747765] msm_cam_smmu soc:qcom,cam_smmu:msm_cam_smmu_jpeg: Linked as a
consumer to 15000000.apps-smmu
[ 1.747908] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_jpeg to group 23
[ 1.748034] platform soc:qcom,cam_smmu:msm_cam_icp_fw: assigned reserved memory
node camera_region@86000000
[ 1.748201] msm_cam_smmu soc:qcom,cam_smmu:msm_cam_smmu_icp: Linked as a
consumer to 15000000.apps-smmu
[ 1.748367] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_icp to group 24
[ 1.748475] CAM_INFO: CAM-SMMU: cam_smmu_get_memory_regions_info: 3730 [icp] :
Discard region specified [0xdff00000 0xe0200000] in [0x10c00000 0xfef00000]
[ 1.748596] msm_cam_smmu soc:qcom,cam_smmu:msm_cam_smmu_cpas_cdm: Linked as a
consumer to 15000000.apps-smmu
[ 1.748745] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cpas_cdm to
group 25
[ 1.749385] cam-cpas ac40000.qcom,cam-cpas: Linked as a consumer to regulator.54
[ 1.751768] register_client_adhoc:find path.src 1 dest 589
[ 1.751858] register_client_adhoc:Client handle 41 cam_ahb
[ 1.751941] register_client_adhoc:find path.src 170 dest 512
[ 1.752012] register_client_adhoc:Client handle 42 cam_hf_0_mnoc
[ 1.752101] register_client_adhoc:find path.src 137 dest 512
[ 1.752169] register_client_adhoc:Client handle 43 cam_sf_0_mnoc
[ 1.752233] register_client_adhoc:find path.src 171 dest 512
[ 1.752301] register_client_adhoc:Client handle 44 cam_sf_icp_mnoc
[ 1.752362] register_client_adhoc:find path.src 146 dest 778
[ 1.752379] register_client_adhoc:Client handle 45 cam_hf_0_camnoc
[ 1.752425] register_client_adhoc:find path.src 148 dest 778
[ 1.752440] register_client_adhoc:Client handle 46 cam_sf_0_camnoc
[ 1.752487] register_client_adhoc:find path.src 182 dest 778
[ 1.752503] register_client_adhoc:Client handle 47 cam_sf_icp_camnoc
[ 1.753901] msm_cam_cdm ac48000.qcom,cpas-cdm0: Linked as a consumer to
regulator.54
[ 1.755278] csid_17x acb3000.qcom,csid0: Linked as a consumer to regulator.54
[ 1.755293] csid_17x acb3000.qcom,csid0: Linked as a consumer to regulator.50
[ 1.755364] csid_17x acba000.qcom,csid1: Linked as a consumer to regulator.54
[ 1.755377] csid_17x acba000.qcom,csid1: Linked as a consumer to regulator.51
[ 1.755442] csid_17x acc1000.qcom,csid2: Linked as a consumer to regulator.54
[ 1.755454] csid_17x acc1000.qcom,csid2: Linked as a consumer to regulator.52
[ 1.755703] csid_lite acc8000.qcom,csid-lite: Linked as a consumer to
regulator.54
[ 1.755977] cam_vfe acaf000.qcom,vfe0: Linked as a consumer to regulator.54
[ 1.755991] cam_vfe acaf000.qcom,vfe0: Linked as a consumer to regulator.50
[ 1.756056] CAM_ERR: CAM-ISP: cam_vfe_bus_init: 49 Unsupported Bus RD Version
0x0
[ 1.756059] CAM_WARN: CAM-ISP: cam_vfe_core_init: 708 Error, RD cam_vfe_bus_init
failed
[ 1.757245] cam_vfe acb6000.qcom,vfe1: Linked as a consumer to regulator.54
[ 1.757257] cam_vfe acb6000.qcom,vfe1: Linked as a consumer to regulator.51
[ 1.757309] CAM_ERR: CAM-ISP: cam_vfe_bus_init: 49 Unsupported Bus RD Version
0x0
[ 1.757311] CAM_WARN: CAM-ISP: cam_vfe_core_init: 708 Error, RD cam_vfe_bus_init
failed
[ 1.758428] cam_vfe acbd000.qcom,vfe2: Linked as a consumer to regulator.54
[ 1.758440] cam_vfe acbd000.qcom,vfe2: Linked as a consumer to regulator.52
[ 1.758488] CAM_ERR: CAM-ISP: cam_vfe_bus_init: 49 Unsupported Bus RD Version
0x0
[ 1.758490] CAM_WARN: CAM-ISP: cam_vfe_core_init: 708 Error, RD cam_vfe_bus_init
failed
[ 1.759584] CAM_INFO: CAM-UTIL: cam_soc_util_get_option_clk_by_name: 559 No clk
data for ife_dsp_clk
[ 1.759586] CAM_WARN: CAM-ISP: cam_vfe_init_soc_resources: 154 Option clk get
failed with rc -22
[ 1.759602] cam_vfe acc4000.qcom,vfe-lite: Linked as a consumer to regulator.54
[ 1.761150] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5209 failed to
create dentry
[ 1.761176] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5209 failed to
create dentry
[ 1.761201] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5209 failed to
create dentry
[ 1.761225] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5209 failed to
create dentry
[ 1.761250] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5209 failed to
create dentry
[ 1.761274] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5209 failed to
create dentry
[ 1.761299] CAM_ERR: CAM-ISP: cam_isp_context_debug_register: 5209 failed to
create dentry
[ 1.761302] CAM_INFO: CAM-ISP: cam_isp_dev_probe: 163 Camera ISP probe complete
[ 1.761629] CAM_INFO: CAM: cam_res_mgr_probe: 682 Disable shared gpio support.
[ 1.761881] cam-cci-driver ac4a000.qcom,cci0: Linked as a consumer to
regulator.54
[ 1.762624] CAM_INFO: CAM-CCI: cam_cci_platform_probe: 455 Device Type :0
[ 1.762711] cam-cci-driver ac4b000.qcom,cci1: Linked as a consumer to
regulator.54
[ 1.763151] CAM_INFO: CAM-CCI: cam_cci_platform_probe: 455 Device Type :1
[ 1.763419] cam-csiphy-driver ac65000.qcom,csiphy0: Linked as a consumer to
regulator.54
[ 1.763437] cam-csiphy-driver ac65000.qcom,csiphy0: Linked as a consumer to
regulator.44
[ 1.763454] cam-csiphy-driver ac65000.qcom,csiphy0: Linked as a consumer to
regulator.22
[ 1.763466] cam-csiphy-driver ac65000.qcom,csiphy0: Linked as a consumer to
regulator.26
[ 1.763534] cam-csiphy-driver ac66000.qcom,csiphy1: Linked as a consumer to
regulator.54
[ 1.763545] cam-csiphy-driver ac66000.qcom,csiphy1: Linked as a consumer to
regulator.44
[ 1.763555] cam-csiphy-driver ac66000.qcom,csiphy1: Linked as a consumer to
regulator.22
[ 1.763568] cam-csiphy-driver ac66000.qcom,csiphy1: Linked as a consumer to
regulator.26
[ 1.763625] cam-csiphy-driver ac67000.qcom,csiphy2: Linked as a consumer to
regulator.54
[ 1.763636] cam-csiphy-driver ac67000.qcom,csiphy2: Linked as a consumer to
regulator.44
[ 1.763649] cam-csiphy-driver ac67000.qcom,csiphy2: Linked as a consumer to
regulator.22
[ 1.763659] cam-csiphy-driver ac67000.qcom,csiphy2: Linked as a consumer to
regulator.26
[ 1.763714] cam-csiphy-driver ac68000.qcom,csiphy3: Linked as a consumer to
regulator.54
[ 1.763724] cam-csiphy-driver ac68000.qcom,csiphy3: Linked as a consumer to
regulator.44
[ 1.763733] cam-csiphy-driver ac68000.qcom,csiphy3: Linked as a consumer to
regulator.22
[ 1.763742] cam-csiphy-driver ac68000.qcom,csiphy3: Linked as a consumer to
regulator.26
[ 1.764012] CAM_INFO: CAM-ACTUATOR: cam_actuator_parse_dt: 60 No GPIO found
[ 1.765162] CAM_WARN: CAM-ICP: cam_a5_get_dt_properties: 46 QoS need not be set
[ 1.765201] cam-a5 ac00000.qcom,a5: Linked as a consumer to regulator.54
[ 1.765379] cam-ipe ac87000.qcom,ipe0: Linked as a consumer to regulator.53
[ 1.765525] cam-bps ac6f000.qcom,bps: Linked as a consumer to regulator.49
[ 1.766130] cam-jpeg-enc ac4e000.qcom,jpegenc: Linked as a consumer to
regulator.54
[ 1.766334] cam-jpeg-dma ac52000.qcom,jpegdma: Linked as a consumer to
regulator.54
[ 1.766668] CAM_INFO: CAM-JPEG: cam_jpeg_dev_probe: 162 Camera JPEG probe
complete
[ 1.767141] cam_lrme_hw ac6b000.qcom,lrme: Linked as a consumer to regulator.54
[ 1.769583] msm_vidc: err : ffffffff: .....: Failed to get platform resources
[ 1.769587] msm_vidc: err : ffffffff: .....: Failed to init core
[ 1.769594] msm_vidc_v4l2: probe of aa00000.qcom,vidc0 failed with error -22
[ 1.769713] msm_vidc: err : ffffffff: .....: no device Registered
[ 1.770460] msm_vidc_v4l2 aa00000.qcom,vidc1:non_secure_cb: Linked as a consumer
to 15000000.apps-smmu
[ 1.770638] iommu: Adding device aa00000.qcom,vidc1:non_secure_cb to group 26
[ 1.770879] msm_vidc_v4l2 aa00000.qcom,vidc1:secure_non_pixel_cb: Linked as a
consumer to 15000000.apps-smmu
[ 1.771269] iommu: Adding device aa00000.qcom,vidc1:secure_non_pixel_cb to group
27
[ 1.771521] msm_vidc_v4l2 aa00000.qcom,vidc1:secure_bitstream_cb: Linked as a
consumer to 15000000.apps-smmu
[ 1.771851] iommu: Adding device aa00000.qcom,vidc1:secure_bitstream_cb to group
28
[ 1.772125] msm_vidc_v4l2 aa00000.qcom,vidc1:secure_pixel_cb: Linked as a
consumer to 15000000.apps-smmu
[ 1.772463] iommu: Adding device aa00000.qcom,vidc1:secure_pixel_cb to group 29
[ 1.772717] GACT probability NOT on
[ 1.772725] Mirror/redirect action on
[ 1.772728] netem: version 1.3
[ 1.772730] u32 classifier
[ 1.772731] Actions configured
[ 1.773025] xt_time: kernel timezone is -0000
[ 1.773063] gre: GRE over IPv4 demultiplexor driver
[ 1.773065] IPv4 over IPsec tunneling driver
[ 1.773246] Initializing XFRM netlink socket
[ 1.773253] IPsec XFRM device driver
[ 1.773331] NET: Registered protocol family 10
[ 1.773754] Segment Routing with IPv6
[ 1.773774] mip6: Mobile IPv6
[ 1.773918] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
[ 1.774067] NET: Registered protocol family 17
[ 1.774071] NET: Registered protocol family 15
[ 1.774095] l2tp_core: L2TP core driver, V2.0
[ 1.774098] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 1.774100] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
[ 1.774105] l2tp_netlink: L2TP netlink interface
[ 1.774112] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
[ 1.774113] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
[ 1.774124] sctp: Hash tables configured (bind 256/256)
[ 1.774180] Key type dns_resolver registered
[ 1.774409] NPU_WARN: npu_bridge_mbox_work: 1180 NPU fw is not loaded
[ 1.774536] minidump-id not found for npu
[ 1.774552] subsys-pil-tz 9800000.qcom,npu: for npu segments only will be
dumped.
[ 1.774573] subsys-pil-tz 9800000.qcom,npu: for md_npu segments only will be
dumped.
[ 1.775210] platform 3d6a000.qcom,gmu: Linked as a consumer to regulator.56
[ 1.775225] platform 3d6a000.qcom,gmu: Linked as a consumer to regulator.57
[ 1.775496] platform 3d6a000.qcom,gmu:gmu_user: Linked as a consumer to
3d40000.arm,smmu-kgsl
[ 1.775536] iommu: Adding device 3d6a000.qcom,gmu:gmu_user to group 30
[ 1.776078] platform 3d6a000.qcom,gmu:gmu_kernel: Linked as a consumer to
3d40000.arm,smmu-kgsl
[ 1.776100] iommu: Adding device 3d6a000.qcom,gmu:gmu_kernel to group 31
[ 1.776972] register_client_adhoc:find path.src 26 dest 512
[ 1.777038] register_client_adhoc:Client handle 48 grp3d
[ 1.777047] register_client_adhoc:find path.src 26 dest 10036
[ 1.777097] register_client_adhoc:Client handle 49 cnoc
[ 1.777100] query_client_usecase_all: query_start
[ 1.777121] query_client_usecase_all: query_start
[ 1.777546] kgsl-3d 3d00000.qcom,kgsl-3d0: Linked as a consumer to regulator.56
[ 1.777568] kgsl-3d 3d00000.qcom,kgsl-3d0: Linked as a consumer to regulator.57
[ 1.777582] register_client_adhoc:find path.src 1 dest 598
[ 1.777661] register_client_adhoc:Client handle 51 gpu_cfg
[ 1.778031] platform 3d40000.qcom,kgsl-iommu:gfx3d_user: Linked as a consumer to
3d40000.arm,smmu-kgsl
[ 1.778066] iommu: Adding device 3d40000.qcom,kgsl-iommu:gfx3d_user to group 32
[ 1.778286] platform 3d40000.qcom,kgsl-iommu:gfx3d_secure: Linked as a consumer
to 3d40000.arm,smmu-kgsl
[ 1.778307] iommu: Adding device 3d40000.qcom,kgsl-iommu:gfx3d_secure to group
33
[ 1.915931] [ds28e16] ds28el16_get_page_data_retry: flag_mi_page0_data is 1
[ 1.915934] [ds28e16] ds28el16_get_page_data_retry: mi_page0_data data:
[ 1.915936] [ds28e16] ds28el16_get_page_data_retry: 43 42 4d 34 57 30 39 4d 00
26 c1 47 4d 44 31 31
[ 1.915945] [ds28e16] authentic_work: battery authentic work begin to restart.
[ 1.915963] [ds28e16] verify_get_property: unsupported property 4
[ 1.915972] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start
0...
[ 1.931263] SerialNumber:0da86ab0e3a1000000000000
[ 1.935584] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3,
3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[ 1.935993] scsi 0:0:0:49488: Well-known LUN SKhynix H9HQ53AECMMDAR 0005
PQ: 0 ANSI: 6
[ 1.936839] scsi 0:0:0:49476: Well-known LUN SKhynix H9HQ53AECMMDAR 0005
PQ: 0 ANSI: 6
[ 1.937496] scsi 0:0:0:49456: Well-known LUN SKhynix H9HQ53AECMMDAR 0005
PQ: 0 ANSI: 6
[ 1.938639] writebooster default len35, param_size45
[ 1.938686] writebooster dLUNumTurboWriteBufferAllocUnits = 0x0
[ 1.938966] scsi 0:0:0:0: Direct-Access SKhynix H9HQ53AECMMDAR 0005 PQ: 0
ANSI: 6
[ 1.938976] ufshcd_slave_configure: ufsfeature set lun 0 sdev 0000000017fba4d9 q
00000000123a24af
[ 1.939533] scsi 0:0:0:1: Direct-Access SKhynix H9HQ53AECMMDAR 0005 PQ: 0
ANSI: 6
[ 1.939540] ufshcd_slave_configure: ufsfeature set lun 1 sdev 0000000034f27048 q
000000000c96fe25
[ 1.940012] scsi 0:0:0:2: Direct-Access SKhynix H9HQ53AECMMDAR 0005 PQ: 0
ANSI: 6
[ 1.940046] ufshcd_slave_configure: ufsfeature set lun 2 sdev 000000000863f34a q
000000005d7e7085
[ 1.940521] scsi 0:0:0:3: Direct-Access SKhynix H9HQ53AECMMDAR 0005 PQ: 0
ANSI: 6
[ 1.940528] ufshcd_slave_configure: ufsfeature set lun 3 sdev 00000000463beda0 q
0000000057658820
[ 1.940996] scsi 0:0:0:4: Direct-Access SKhynix H9HQ53AECMMDAR 0005 PQ: 0
ANSI: 6
[ 1.941004] ufshcd_slave_configure: ufsfeature set lun 4 sdev 00000000eeec57d3 q
00000000d3492e01
[ 1.941473] scsi 0:0:0:5: Direct-Access SKhynix H9HQ53AECMMDAR 0005 PQ: 0
ANSI: 6
[ 1.941481] ufshcd_slave_configure: ufsfeature set lun 5 sdev 00000000659a75eb q
000000003fb72caf
[ 1.942491] sd 0:0:0:0: [sda] Write Protect is off
[ 1.942499] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
[ 1.942649] sd 0:0:0:1: [sdb] Write Protect is off
[ 1.942657] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
[ 1.942680] sd 0:0:0:0: [sda] Optimal transfer size 524288 bytes
[ 1.942839] sd 0:0:0:1: [sdb] Optimal transfer size 524288 bytes
[ 1.943668] sd 0:0:0:2: [sdc] Write Protect is off
[ 1.943676] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
[ 1.943787] sd 0:0:0:3: [sdd] Write Protect is off
[ 1.943794] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
[ 1.943920] sd 0:0:0:2: [sdc] Optimal transfer size 524288 bytes
[ 1.944062] sd 0:0:0:3: [sdd] Optimal transfer size 524288 bytes
[ 1.944716] sd 0:0:0:4: [sde] Write Protect is off
[ 1.944724] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
[ 1.945070] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12
sda13 sda14 sda15 sda16 sda17 sda18 sda19 sda20 sda21 sda22 sda23 sda24 sda25 sda26
sda27 sda28 sda29 sda30 sda31 sda32 sda33 sda34 sda35
[ 1.945077] sd 0:0:0:4: [sde] Optimal transfer size 524288 bytes
[ 1.945149] sdb: sdb1 sdb2
[ 1.946188] sdc: sdc1 sdc2
[ 1.946334] sd 0:0:0:5: [sdf] Write Protect is off
[ 1.946342] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
[ 1.946416] sdd: sdd1 sdd2 sdd3
[ 1.946503] sd 0:0:0:1: [sdb] Attached SCSI disk
[ 1.946670] sd 0:0:0:5: [sdf] Optimal transfer size 524288 bytes
[ 1.947655] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12
sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26
sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40
sde41 sde42 sde43 sde44 sde45 sde46 sde47 sde48 sde49 sde50 sde51 sde52 sde53 sde54
sde55 sde56 sde57 sde58 sde59 sde60 sde61 sde62
[ 1.947723] ufs: start to ffu 0x0
[ 1.947727] sd 0:0:0:3: [sdd] Attached SCSI disk
[ 1.947733] ufs check ffu_arry, vendor:SKhynix , product:H9HQ53AECMMDAR ,
fw_rev:0005
[ 1.947747] ufs ffu don't match 0:SKhynix H9HQ15AECMADAR
[ 1.947751] ufs ffu don't match 1:SKhynix H9HQ15AFAMADAR
[ 1.947755] ufs ffu don't match 2:SKhynix H9HQ21AFAMZDAR
[ 1.947759] sd 0:0:0:2: [sdc] Attached SCSI disk
[ 1.947765] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.949417] sdf: sdf1 sdf2 sdf3 sdf4 sdf5
[ 1.950868] sd 0:0:0:5: [sdf] Attached SCSI disk
[ 1.951212] sd 0:0:0:4: [sde] Attached SCSI disk
[ 1.968317] [ds28e16] Read_RomID: Ready to write 0x33 to maxim IC!
[ 1.969317] [ds28e16] Read_RomID: RomID = 9f,ff,aa,9c,11,f0,04,1c
[ 1.969320] [ds28e16] Read_RomID: crc_low_first = 1c
[ 1.969324] [ds28e16] ds28el16_get_page_status_retry: read page status
communication start... 0
[ 1.969329] [ds28e16] ds28el16_get_page_data_retry: flag_mi_page0_data is 1
[ 1.969330] [ds28e16] ds28el16_get_page_data_retry: mi_page0_data data:
[ 1.969333] [ds28e16] ds28el16_get_page_data_retry: 43 42 4d 34 57 30 39 4d 00
26 c1 47 4d 44 31 31
[ 2.037169] [HPB E][skhpb_init_handler:2565] Run without HPB - err=-19
[ 2.185156] [ds28e16] ds28el16_get_page_data_retry: flag_mi_page0_data is 1
[ 2.185158] [ds28e16] ds28el16_get_page_data_retry: mi_page0_data data:
[ 2.185160] [ds28e16] ds28el16_get_page_data_retry: 43 42 4d 34 57 30 39 4d 00
26 c1 47 4d 44 31 31
[ 2.185168] [ds28e16] verify_get_property: unsupported property 227
[ 2.185171] [ds28e16] verify_get_property: unsupported property 228
[ 2.185173] [ds28e16] verify_get_property: unsupported property 229
[ 2.185174] [ds28e16] verify_get_property: unsupported property 230
[ 2.185176] [ds28e16] verify_get_property: unsupported property 231
[ 2.185178] [ds28e16] ds28el16_get_page_data_retry: flag_mi_page0_data is 1
[ 2.185179] [ds28e16] ds28el16_get_page_data_retry: mi_page0_data data:
[ 2.185181] [ds28e16] ds28el16_get_page_data_retry: 43 42 4d 34 57 30 39 4d 00
26 c1 47 4d 44 31 31
[ 2.240272] [ds28e16] ds28el16_get_page_data_retry: flag_mi_page0_data is 1
[ 2.240275] [ds28e16] ds28el16_get_page_data_retry: mi_page0_data data:
[ 2.240277] [ds28e16] ds28el16_get_page_data_retry: 43 42 4d 34 57 30 39 4d 00
26 c1 47 4d 44 31 31
[ 2.240279] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start
0...
[ 2.240283] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start
0...
[ 2.295449] [ds28e16] ds28el16_get_page_data_retry: flag_mi_page0_data is 1
[ 2.295450] [ds28e16] ds28el16_get_page_data_retry: mi_page0_data data:
[ 2.295453] [ds28e16] ds28el16_get_page_data_retry: 43 42 4d 34 57 30 39 4d 00
26 c1 47 4d 44 31 31
[ 2.297267] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using 64-bit
ADMA in legacy mode
[ 2.313464] msm-dwc3 a600000.ssusb: Linked as a consumer to regulator.46
[ 2.313595] irq: type mismatch, failed to map hwirq-14 for interrupt-
controller@b220000!
[ 2.313676] irq: type mismatch, failed to map hwirq-15 for interrupt-
controller@b220000!
[ 2.313975] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
[ 2.314016] dwc3 a600000.dwc3: changing max_speed on rev 00000000
[ 2.314688] register_client_adhoc:find path.src 61 dest 512
[ 2.314814] register_client_adhoc:find path.src 61 dest 676
[ 2.314880] register_client_adhoc:find path.src 1 dest 583
[ 2.314951] register_client_adhoc:Client handle 50 usb0
[ 2.315978] msm-dwc3 a600000.ssusb: Dropping the link to regulator.46
[ 2.316128] qpnp-pdphy c440000.qcom,spmi:qcom,pm7250b@2:qcom,usb-pdphy@1700:
Linked as a consumer to regulator.8
[ 2.316720] qpnp-pdphy c440000.qcom,spmi:qcom,pm7250b@2:qcom,usb-pdphy@1700:
usbpd_create failed: -517
[ 2.316788] qpnp-pdphy c440000.qcom,spmi:qcom,pm7250b@2:qcom,usb-pdphy@1700:
Dropping the link to regulator.8
[ 2.316980] six-pin-step-chg-cfg: 4210000uV, 6000000uA
[ 2.316982] six-pin-step-chg-cfg: 4400000uV, 5400000uA
[ 2.316984] six-pin-step-chg-cfg: 4470000uV, 3776000uA
[ 2.317468] PL_DISABLE: CHG_STATE_VOTER,0 voting on of val=1
[ 2.317470] PL_DISABLE: current vote is now 1 voted by CHG_STATE_VOTER,0,
previous voted 0
[ 2.317473] PL_DISABLE: PARALLEL_PSY_VOTER,2 voting on of val=1
[ 2.317486] PL_DISABLE: PL_INDIRECT_VOTER,3 voting on of val=1
[ 2.317507] PL_DISABLE: PL_DELAY_VOTER,4 voting on of val=1
[ 2.317848] pm7250b_charger: smblib_set_charge_param: usb otg current limit =
3000000 (0x05)
[ 2.317851] USB_ICL: DEFAULT_VOTER,0 voting off of val=0
[ 2.317853] USB_ICL: current vote is now -22 voted by (null),-22, previous voted
-22
[ 2.317855] DC_SUSPEND: DEFAULT_VOTER,0 voting off of val=0
[ 2.317857] DC_SUSPEND: current vote is now 0 voted by DEFAULT_VOTER,0, previous
voted 0
[ 2.317868] FCC: HW_LIMIT_VOTER,0 voting on of val=6000000
[ 2.317870] FCC: current vote is now 6000000 voted by HW_LIMIT_VOTER,0, previous
voted -22
[ 2.317873] FV: HW_LIMIT_VOTER,0 voting on of val=4470000
[ 2.317875] FV: current vote is now 4470000 voted by HW_LIMIT_VOTER,0, previous
voted -22
[ 2.317877] FV: NON_FFC_VFLOAT_VOTER,2 voting on of val=4450000
[ 2.317879] FV: current vote is now 4450000 voted by NON_FFC_VFLOAT_VOTER,2,
previous voted 4470000
[ 2.317892] pm7250b_charger: smblib_set_charge_param: DC input current limit =
100000 (0x02)
[ 2.317970] CHG_DISABLE: DEFAULT_VOTER,0 voting off of val=0
[ 2.317972] CHG_DISABLE: current vote is now 0 voted by DEFAULT_VOTER,0,
previous voted 0
[ 2.318541] pm7250b_charger: smblib_set_charge_param: switching frequency = 600
(0x0f)
[ 2.318544] AWAKE: DETACH_DETECT_VOTER,0 voting off of val=0
[ 2.318546] AWAKE: current vote is now 0 voted by DETACH_DETECT_VOTER,0,
previous voted 0
[ 2.318571] qcom,qpnp-smb5 c440000.qcom,spmi:qcom,pm7250b@2:qcom,qpnp-smb5:
Linked as a consumer to regulator.66
[ 2.318573] pm7250b_charger: smblib_request_dpdm: enabling DPDM regulator
[ 2.319087] AWAKE: PL_DELAY_VOTER,1 voting on of val=1
[ 2.319089] AWAKE: current vote is now 1 voted by PL_DELAY_VOTER,1, previous
voted 0
[ 2.319091] AWAKE: CHG_AWAKE_VOTER,2 voting on of val=1
[ 2.319094] could not get vbat vol from bms
[ 2.319095] chg->start_step_vbat: 0
[ 2.319098] TEMP_CHANGE_IRQ_DISABLE: DEFAULT_VOTER,0 voting off of val=0
[ 2.319100] TEMP_CHANGE_IRQ_DISABLE: current vote is now 0 voted by
DEFAULT_VOTER,0, previous voted 0
[ 2.319103] pm7250b_charger: smblib_usb_plugin_locked: IRQ: usbin-plugin
attached
[ 2.319939] FCC_MAIN: WLS_PL_CHARGING_VOTER,0 voting off of val=0
[ 2.319941] FCC_MAIN: current vote is now -22 voted by (null),-22, previous
voted -22
[ 2.319945] pm7250b_charger: smblib_set_charge_param: fast charge current: -22
is out of range [0, 8000000]
[ 2.319957] pm7250b_charger: smblib_set_charge_param: fast charge current = 0
(0x00)
[ 2.319960] pm7250b_charger: dc_plugin_irq_handler: dcin_present= 0,
usbin_present= 1, cp_reason = 0
[ 2.320099] USB_ICL: USB_PSY_VOTER,5 voting on of val=500000
[ 2.320101] USB_ICL: current vote is now 500000 voted by USB_PSY_VOTER,5,
previous voted -22
[ 2.320103] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 2.320105] PL_ENABLE_INDIRECT: USBIN_I_VOTER,0 voting off of val=0
[ 2.320107] PL_ENABLE_INDIRECT: current vote is now 0 voted by USBIN_I_VOTER,0,
previous voted 0
[ 2.320219] USB_ICL_IRQ_DISABLE: USB_SUSPEND_VOTER,0 voting off of val=0
[ 2.320221] USB_ICL_IRQ_DISABLE: current vote is now 0 voted by
USB_SUSPEND_VOTER,0, previous voted 0
[ 2.320232] pm7250b_charger: smblib_run_aicl: re-running AICL
[ 2.320253] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 2.320256] pm7250b_charger: smblib_handle_rp_change: CC change old_mode=0
new_mode=8
[ 2.320258] pm7250b_charger: typec_state_change_irq_handler: IRQ: cc-state-
change; Type-C SOURCE_HIGH detected
[ 2.320269] pm7250b_charger: usb_source_change_irq_handler: APSD_STATUS = 0x01
[ 2.320299] pm7250b_charger: smblib_update_usb_type: usb_online=1 QC3P5=0
[ 2.320301] pm7250b_charger: smblib_update_usb_type: APSD=SDP PD=0 QC3P5=0
[ 2.320322] pm7250b_charger: smblib_handle_apsd_done: IRQ: apsd-done rising; SDP
detected
[ 2.320334] pm7250b_charger: usb_source_change_irq_handler: APSD_STATUS = 0x01
[ 2.320345] pm7250b_charger: smblib_eval_chg_termination: Couldn't read SOC
value, rc=-22
[ 2.321202] pm7250b_charger: smblib_icl_change_work: pre_icl=0,
icl_settled=500000
[ 2.321225] PL_DISABLE: CHG_STATE_VOTER,0 voting off of val=0
[ 2.321247] PL_AWAKE: FCC_STEPPER_VOTER,0 voting off of val=0
[ 2.321249] PL_AWAKE: current vote is now 0 voted by FCC_STEPPER_VOTER,0,
previous voted 0
[ 2.321252] PL_AWAKE: FCC_STEPPER_VOTER,0 voting on of val=1
[ 2.321254] PL_AWAKE: current vote is now 1 voted by FCC_STEPPER_VOTER,0,
previous voted 0
[ 2.321266] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 2.322002] QCOM-BATT: fcc_stepper_work: get batt temp=0
[ 2.322004] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=99978
[ 2.322007] FCC_MAIN: current vote is now 99978 voted by FCC_STEPPER_VOTER,1,
previous voted -22
[ 2.322019] pm7250b_charger: smblib_set_charge_param: fast charge current =
99978 (0x01)
[ 2.322372] pm7250b_charger: smblib_get_prop_batt_status: Couldn't get batt
capacity rc=-22
[ 2.322565] Couldn't get vbat rc=-22
[ 2.322567] Couldn't get vbat rc=-22
[ 2.322569] bcl_soc:bcl_read_soc battery percentage read error:-61
[ 2.323023] pm7250b_charger: smblib_get_prop_batt_status: Couldn't get batt
capacity rc=-22
[ 2.323093] PL_AWAKE: FCC_STEPPER_VOTER,0 voting off of val=0
[ 2.323095] PL_AWAKE: current vote is now 0 voted by FCC_STEPPER_VOTER,0,
previous voted 1
[ 2.323098] PL_AWAKE: FCC_STEPPER_VOTER,0 voting on of val=1
[ 2.323100] PL_AWAKE: current vote is now 1 voted by FCC_STEPPER_VOTER,0,
previous voted 0
[ 2.323112] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 2.323305] QCOM-BATT: fcc_stepper_work: get batt temp=0
[ 2.323307] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=199978
[ 2.323309] FCC_MAIN: current vote is now 199978 voted by FCC_STEPPER_VOTER,1,
previous voted 99978
[ 2.323321] pm7250b_charger: smblib_set_charge_param: fast charge current =
199978 (0x03)
[ 2.323869] pm7250b_charger: smblib_get_prop_batt_status: Couldn't get batt
capacity rc=-22
[ 2.326441] USB_LIMITED_IRQ_DISABLE: CHARGER_TYPE_VOTER,0 voting on of val=1
[ 2.326444] USB_LIMITED_IRQ_DISABLE: current vote is now 1 voted by
CHARGER_TYPE_VOTER,0, previous voted 0
[ 2.326447] USB_HDC_IRQ_DISABLE: CHARGER_TYPE_VOTER,0 voting on of val=1
[ 2.326449] USB_HDC_IRQ_DISABLE: current vote is now 1 voted by
CHARGER_TYPE_VOTER,0, previous voted 0
[ 2.326451] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 2.326601] pm7250b_charger: smblib_run_aicl: re-running AICL
[ 2.326621] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 2.326625] pm7250b_charger: smblib_set_prop_typec_power_role: power role
change: 1 --> 1!
[ 2.326625] pm7250b_charger: smblib_set_prop_typec_power_role: power role
already in 1, ignore!
[ 2.326694] SMB5 status - usb:present=1 type=4 batt:present = 1 health = 1
charge = 3
[ 2.326721] QPNP SMB5 probed successfully
[ 2.326848] QG-K: qg_parse_dt: PMIC subtype 46 Digital major 1
[ 2.326873] QG-K: qg_parse_s2_dt: DT: S2 FIFO length=5 low_vbat_length=2
acc_length=128 acc_interval=100
[ 2.326882] QG-K: qg_parse_cl_dt: DT: cl_min_start_soc=10 cl_max_start_soc=15
cl_min_temp=150 cl_max_temp=500 chip->cl->dt.cl_wt_enable=0
[ 2.326885] QG-K: qg_parse_dt: DT: OCV timer_expiry =-22min ocv_tol_threshold=-
22uV
[ 2.326898] QG-K: qg_parse_dt: DT: vbatt_empty_mv=3100mV vbatt_low_mv=3300mV
delta_soc=1 ext-sns=1, batterysecret_support = 1
[ 2.326929] QG-K: qg_set_wa_flags: wa_flags = 0
[ 2.326959] QG-K: qg_master_hold: Master hold = 1
[ 2.327122] QG-K: qg_master_hold: Master hold = 0
[ 2.327274] pm7250b_charger: smblib_get_prop_batt_status: Couldn't get batt
capacity rc=-22
[ 2.328293] PL_AWAKE: FCC_STEPPER_VOTER,0 voting off of val=0
[ 2.328295] PL_AWAKE: current vote is now 0 voted by FCC_STEPPER_VOTER,0,
previous voted 1
[ 2.328298] PL_AWAKE: FCC_STEPPER_VOTER,0 voting on of val=1
[ 2.328300] PL_AWAKE: current vote is now 1 voted by FCC_STEPPER_VOTER,0,
previous voted 0
[ 2.328312] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 2.328332] QCOM-BATT: fcc_stepper_work: get batt temp=0
[ 2.328334] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=299978
[ 2.328336] FCC_MAIN: current vote is now 299978 voted by FCC_STEPPER_VOTER,1,
previous voted 199978
[ 2.328348] pm7250b_charger: smblib_set_charge_param: fast charge current =
299978 (0x05)
[ 2.340409] QG-K: qg_vbat_thresholds_config: VBAT EMPTY threshold updated to
3100mV temp=289
[ 2.340430] QG-K: qg_vbat_thresholds_config: VBAT LOW threshold updated to
3300mV temp=289
[ 2.341414] QG-K: get_batt_id_ohm: batt_id_mv=944, batt_id_ohm=101420
[ 2.341604] QG-K: qg_get_maxim_authentic: get maxim_authentic = 1
[ 2.341606] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start
0...
[ 2.341609] QG-K: qg_get_maxim_romid: get maxim RomID = 9f,ff,aa,9c,11,f0,04,1c
[ 2.341611] [ds28e16] ds28el16_get_page_data_retry: flag_mi_page0_data is 1
[ 2.341613] [ds28e16] ds28el16_get_page_data_retry: mi_page0_data data:
[ 2.341615] [ds28e16] ds28el16_get_page_data_retry: 43 42 4d 34 57 30 39 4d 00
26 c1 47 4d 44 31 31
[ 2.341617] QG-K: qg_get_maxim_page0: get maxim ds_page0 = C B M 4 W 0 9 M \x00
& \xc1 G M D 1 1
[ 2.341622] of_batterydata_get_best_profile: J17_cosmx_4820mah found
[ 2.343732] QG-K: qg_batterydata_init: QG Battery-profile loaded
[ 2.343738] QG-K: qg_load_battery_profile: profile=J17_cosmx_4820mah
FV=4470000uV FCC=6000ma
[ 2.343740] QG-K: qg_setup_battery: battery_missing=0 batt_id_ohm=101420 Ohm
profile_loaded=1 profile=J17_cosmx_4820mah
[ 2.343784] QG-K: qg_sanitize_sdam: SDAM valid
[ 2.343894] QG-K: qg_determine_pon_soc: S7_PON_OCV OCV=4102169
[ 2.343905] QG-K: qg_determine_pon_soc: S3_GOOD_OCV OCV=6377865
[ 2.343915] QG-K: qg_determine_pon_soc: S3_LAST_OCV OCV=6377865
[ 2.343926] QG-K: qg_determine_pon_soc: SDAM_PON_OCV OCV=0
[ 2.346690] QG-K: qg_determine_pon_soc: Shutdown: Valid=1 SOC=72 OCV=4098200uV
time=56902037secs temp=285, time_now=56902134secs temp_now=289 S7_soc=72
[ 2.346695] QG-K: qg_determine_pon_soc: Using SHUTDOWN_SOC @ PON
[ 2.346697] QG-K: qg_determine_pon_soc: v_float=4470000 v_cutoff=3400000
FULL_SOC=99 CUTOFF_SOC=2 calcualte_soc=73
pon_soc=72 shutdown[SDAM_SOC]=72 final soc
= 72 ibat = 0
[ 2.347248] pm7250b_charger: smblib_get_prop_batt_status: Couldn't get batt
capacity rc=-22
[ 2.347367] Couldn't get vbat rc=-22
[ 2.347368] Couldn't get vbat rc=-22
[ 2.347370] bcl_soc:bcl_read_soc battery percentage read error:-61
[ 2.347419] PL_AWAKE: FCC_STEPPER_VOTER,0 voting off of val=0
[ 2.347421] PL_AWAKE: current vote is now 0 voted by FCC_STEPPER_VOTER,0,
previous voted 1
[ 2.347424] PL_AWAKE: FCC_STEPPER_VOTER,0 voting on of val=1
[ 2.347426] PL_AWAKE: current vote is now 1 voted by FCC_STEPPER_VOTER,0,
previous voted 0
[ 2.347440] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 2.347461] QCOM-BATT: fcc_stepper_work: get batt temp=0
[ 2.347464] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=399978
[ 2.347465] FCC_MAIN: current vote is now 399978 voted by FCC_STEPPER_VOTER,1,
previous voted 299978
[ 2.347478] pm7250b_charger: smblib_set_charge_param: fast charge current =
399978 (0x07)
[ 2.347901] pm7250b_charger: smblib_get_prop_batt_status: Couldn't get batt
capacity rc=-22
[ 2.348983] QG-K: qg_store_soc_params: SDAM write param 0 value=1
[ 2.348994] QG-K: qg_store_soc_params: SDAM write param 1 value=72
[ 2.349006] QG-K: qg_store_soc_params: SDAM write param 2 value=289
[ 2.349017] QG-K: qg_store_soc_params: SDAM write param 3 value=0
[ 2.349029] QG-K: qg_store_soc_params: SDAM write param 4 value=4098200
[ 2.349040] QG-K: qg_store_soc_params: SDAM write param 5 value=0
[ 2.349051] QG-K: qg_store_soc_params: SDAM write param 6 value=56902134
[ 2.349063] QG-K: qg_determine_pon_soc: using SHUTDOWN_SOC @ PON
ocv_uv=4098200uV soc=72
[ 2.349434] QG-K: qg_request_interrupt: IRQ qg-vbat-low registered wakeable=1
[ 2.349584] QG-K: qg_request_interrupt: IRQ qg-vbat-empty registered wakeable=1
[ 2.349733] QG-K: qg_request_interrupt: IRQ qg-fifo-done registered wakeable=1
[ 2.349974] QG-K: qg_request_interrupt: IRQ qg-good-ocv registered wakeable=1
[ 2.350025] QG-K: qpnp_qg_probe: QG initialized!
battery_profile=J17_cosmx_4820mah SOC=72 QG_subtype=4 QG_version=QG_PMIC5
QG_mode=QG_V_I
[ 2.350754] FV: BATT_PROFILE_VOTER,1 voting on of val=4470000
[ 2.350757] FCC: BATT_PROFILE_VOTER,1 voting on of val=6000000
[ 2.351443] pm7250b_charger: smblib_get_prop_batt_status: Couldn't get batt
capacity rc=-22
[ 2.354008] CP_DISABLE: USER_VOTER,0 voting on of val=1
[ 2.354010] CP_DISABLE: current vote is now 1 voted by USER_VOTER,0, previous
voted 0
[ 2.354249] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
disable switcher
[ 2.354270] Couldn't get vbat rc=-22
[ 2.354271] Couldn't get vbat rc=-22
[ 2.354274] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
Couldn't get battery soc, rc=-61
[ 2.354277] CP_ILIM: FCC_VOTER,0 voting on of val=3000000
[ 2.354279] CP_ILIM: current vote is now 3000000 voted by FCC_VOTER,0, previous
voted -22
[ 2.354456] pm7250b_charger: smblib_get_prop_batt_status: Couldn't get batt
capacity rc=-22
[ 2.354495] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 2.354518] QG-K: qg_input_status_update: Input status changed usb_present=1
dc_present=0
[ 2.354520] QG-K: qg_scale_soc: SOC scale: Start msoc=72 catch_up_soc=72
delta_soc=1
[ 2.354532] QG-K: scale_soc_stop: SOC scale stopped: msoc=72 catch_up_soc=72
[ 2.354889] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp: set
iin_ma = 3150mA
[ 2.354892] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp: set CP
master ilim to 3150000uA
[ 2.354989] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
smb1398 DIV2_CP master is probed successfully
[ 2.355477] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 2.355480] QG_WS: TTF_AWAKE_VOTER,0 voting on of val=1
[ 2.356214] pm7250b_charger: smblib_get_prop_batt_status: Couldn't get batt
capacity rc=-22
[ 2.358007] Couldn't get batt temp rc=-22
[ 2.358009] Couldn't get batt temp rc=-22
[ 2.360055] QG-K: qg_get_prop_soc_decimal: debug soc_dec=0 dec_rate=28
last_val=0 last_soc_dec=0 last_hal_soc=0
[ 2.360058] QG-K: qg_get_prop_soc_decimal: debug val=50 soc_dec=0 sys_soc=0
dec_rate=28 soc=72 hal_soc=72 last_val=50 last_soc_dec=0 last_hal_soc=72
[ 2.362834] QG-K: qg_psy_get_property: get battery temp = 289
[ 2.362962] QG-K: qg_get_maxim_authentic: get maxim_authentic = 1
[ 2.362965] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start
0...
[ 2.362967] QG-K: qg_get_maxim_chipok: get maxim_chip_ok = 1
[ 2.363913] PL_AWAKE: FCC_STEPPER_VOTER,0 voting off of val=0
[ 2.363915] PL_AWAKE: current vote is now 0 voted by FCC_STEPPER_VOTER,0,
previous voted 1
[ 2.363918] PL_AWAKE: FCC_STEPPER_VOTER,0 voting on of val=1
[ 2.363920] PL_AWAKE: current vote is now 1 voted by FCC_STEPPER_VOTER,0,
previous voted 0
[ 2.363933] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 2.364044] CP_SLAVE_DISABLE: SRC_VOTER,0 voting on of val=1
[ 2.364046] CP_SLAVE_DISABLE: current vote is now 1 voted by SRC_VOTER,0,
previous voted 0
[ 2.364049] CP_DISABLE: SRC_VOTER,5 voting on of val=1
[ 2.364050] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 2.364053] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 2.364221] pm7250b_charger: smblib_run_aicl: re-running AICL
[ 2.364241] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 2.367435] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 2.367438] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=499978
[ 2.367440] FCC_MAIN: current vote is now 499978 voted by FCC_STEPPER_VOTER,1,
previous voted 399978
[ 2.367443] pm7250b_charger: is_cp_topo_vbatt: true
[ 2.367455] pm7250b_charger: smblib_set_charge_param: fast charge current =
499978 (0x09)
[ 2.367458] CP_ILIM: FCC_VOTER,0 voting on of val=1000000
[ 2.367460] CP_ILIM: current vote is now 1000000 voted by FCC_VOTER,0, previous
voted 3000000
[ 2.368360] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp: set
iin_ma = 1050mA
[ 2.368362] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp: set CP
master ilim to 1050000uA
[ 2.368880] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
irq_status = 0x2
[ 2.370023] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 2.371716] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 2.372573] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 2.374196] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
irq_status = 0x2
[ 2.374349] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 2.376472] sps:BAM 0x0000000006064000 is registered.
[ 2.376714] coresight-stm 6002000.stm: STM32 initialized
[ 2.376819] msm-dwc3 a600000.ssusb: Linked as a consumer to regulator.46
[ 2.376933] irq: type mismatch, failed to map hwirq-14 for interrupt-
controller@b220000!
[ 2.377007] irq: type mismatch, failed to map hwirq-15 for interrupt-
controller@b220000!
[ 2.377297] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
[ 2.377338] dwc3 a600000.dwc3: changing max_speed on rev 00000000
[ 2.378027] register_client_adhoc:find path.src 61 dest 512
[ 2.378153] register_client_adhoc:find path.src 61 dest 676
[ 2.378217] register_client_adhoc:find path.src 1 dest 583
[ 2.378287] register_client_adhoc:Client handle 50 usb0
[ 2.379302] msm-dwc3 a600000.ssusb: Dropping the link to regulator.46
[ 2.379448] qpnp-pdphy c440000.qcom,spmi:qcom,pm7250b@2:qcom,usb-pdphy@1700:
Linked as a consumer to regulator.8
[ 2.380046] usbpd usbpd0: Type-C Source (high - 3.0A) connected
[ 2.380139] msm-dwc3 a600000.ssusb: Linked as a consumer to regulator.46
[ 2.380218] typec_set_pwr_opmode pwr opmode:2
[ 2.380524] pm7250b_charger: smblib_set_charge_param: switching frequency = 600
(0x0f)
[ 2.380541] pm7250b_charger: smblib_usb_pd_adapter_allowance_override: set
USBIN_ALLOW_OVERRIDE: 8
[ 2.380557] pm7250b_charger: smblib_set_charge_param: AICL CONT threshold = -
1000 (0x00)
[ 2.380837] irq: type mismatch, failed to map hwirq-14 for interrupt-
controller@b220000!
[ 2.380923] irq: type mismatch, failed to map hwirq-15 for interrupt-
controller@b220000!
[ 2.381006] PL_AWAKE: FCC_STEPPER_VOTER,0 voting off of val=0
[ 2.381013] PL_AWAKE: current vote is now 0 voted by FCC_STEPPER_VOTER,0,
previous voted 1
[ 2.381022] PL_AWAKE: FCC_STEPPER_VOTER,0 voting on of val=1
[ 2.381027] PL_AWAKE: current vote is now 1 voted by FCC_STEPPER_VOTER,0,
previous voted 0
[ 2.381046] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 2.381098] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 2.381107] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 2.381115] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 2.381231] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
[ 2.381269] dwc3 a600000.dwc3: changing max_speed on rev 00000000
[ 2.381305] pm7250b_charger: smblib_run_aicl: re-running AICL
[ 2.381331] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 2.381935] register_client_adhoc:find path.src 61 dest 512
[ 2.382053] register_client_adhoc:find path.src 61 dest 676
[ 2.382118] register_client_adhoc:find path.src 1 dest 583
[ 2.382187] register_client_adhoc:Client handle 50 usb0
[ 2.382281] msm-dwc3 a600000.ssusb: Linked as a consumer to regulator.66
[ 2.382345] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 2.382353] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=599978
[ 2.382358] FCC_MAIN: current vote is now 599978 voted by FCC_STEPPER_VOTER,1,
previous voted 499978
[ 2.382365] pm7250b_charger: is_cp_topo_vbatt: true
[ 2.382382] pm7250b_charger: smblib_set_charge_param: fast charge current =
599978 (0x0b)
[ 2.382389] core_ctl: Creating CPU group 0
[ 2.382391] core_ctl: Init CPU0 state
[ 2.382393] core_ctl: Init CPU1 state
[ 2.382394] core_ctl: Init CPU2 state
[ 2.382396] core_ctl: Init CPU3 state
[ 2.382397] core_ctl: Init CPU4 state
[ 2.382398] core_ctl: Init CPU5 state
[ 2.382530] core_ctl: Creating CPU group 6
[ 2.382531] core_ctl: Init CPU6 state
[ 2.382532] core_ctl: Init CPU7 state
[ 2.382714] registered taskstats version 1
[ 2.382716] Loading compiled-in X.509 certificates
[ 2.382721] page_owner is disabled
[ 2.382826] Key type ._fscrypt registered
[ 2.382828] Key type .fscrypt registered
[ 2.382830] Key type fscrypt-provisioning registered
[ 2.382840] Error fetching DDR manufacturer id from SMEM!
[ 2.382860] pstore: Invalid compression size for deflate: 0
[ 2.383235] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 2.384403] msm-dwc3 a600000.ssusb: DWC3 exited from low power mode
[ 2.385635] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 2.385849] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
irq_status = 0x2
[ 2.389154] adsprpc: init_secure_vmid_list: secure VMID = 22
[ 2.389157] adsprpc: init_secure_vmid_list: secure VMID = 37
[ 2.389169] adsprpc: fastrpc_probe: service location enabled for avs/audio
(audio_pdr_adsprpc)
[ 2.389171] adsprpc: fastrpc_probe: service location enabled for tms/servreg
(sensors_pdr_adsprpc)
[ 2.389395] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1: Linked as
a consumer to 15000000.apps-smmu
[ 2.389586] iommu: Adding device
soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 34
[ 2.389857] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2: Linked as
a consumer to 15000000.apps-smmu
[ 2.390019] iommu: Adding device
soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 35
[ 2.390118] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global
file
[ 2.390255] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3: Linked as
a consumer to 15000000.apps-smmu
[ 2.390407] iommu: Adding device
soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 36
[ 2.390503] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global
file
[ 2.390636] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4: Linked as
a consumer to 15000000.apps-smmu
[ 2.390781] iommu: Adding device
soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 37
[ 2.390881] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global
file
[ 2.391011] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5: Linked as
a consumer to 15000000.apps-smmu
[ 2.391151] iommu: Adding device
soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb5 to group 38
[ 2.391266] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global
file
[ 2.391437] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6: Linked as
a consumer to 15000000.apps-smmu
[ 2.391573] iommu: Adding device
soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 39
[ 2.391672] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global
file
[ 2.391801] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7: Linked as
a consumer to 15000000.apps-smmu
[ 2.391945] iommu: Adding device
soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 40
[ 2.392066] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global
file
[ 2.392202] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8: Linked as
a consumer to 15000000.apps-smmu
[ 2.392351] iommu: Adding device
soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 41
[ 2.392451] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global
file
[ 2.392587] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9: Linked as
a consumer to 15000000.apps-smmu
[ 2.392978] iommu: Adding device
soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb9 to group 42
[ 2.393091] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global
file
[ 2.393241] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10: Linked
as a consumer to 15000000.apps-smmu
[ 2.393380] iommu: Adding device
soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb10 to group 43
[ 2.393483] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global
file
[ 2.393625] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11: Linked
as a consumer to 15000000.apps-smmu
[ 2.393765] iommu: Adding device
soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb11 to group 44
[ 2.393868] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global
file
[ 2.393999] fastrpc soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12: Linked
as a consumer to 15000000.apps-smmu
[ 2.394145] iommu: Adding device
soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb12 to group 45
[ 2.394250] Error: swapper/0: fastrpc_cb_probe: failed to create debugfs global
file
[ 2.394543] adsprpc: fastrpc_device_init: SSR notifier registered for adsp
[ 2.394546] adsprpc: fastrpc_device_init: SSR notifier registered for modem
[ 2.394549] adsprpc: fastrpc_device_init: SSR notifier registered for slpi
[ 2.394551] adsprpc: fastrpc_device_init: SSR notifier registered for cdsp
[ 2.397561] mtdoops: mtdoops_inc_counter nextpage: 6,oops_pages:8
[ 2.397562] mtdoops: ready 6, 799 (no erase)
[ 2.397563] mtdoops: Attached to MTD device 0
[ 2.397698] block2mtd: mtd0: [/dev/block/sda15] erase_size = 2048KiB [2097152]
[ 2.397806] ngd_msm_ctrl 3ac0000.slim: Linked as a consumer to 15000000.apps-
smmu
[ 2.400675] iommu: Adding device 3ac0000.slim to group 46
[ 2.402030] input: gpio-keys as /devices/platform/soc/soc:gpio_keys/input/input3
[ 2.402111] [NVT-ts-spi] nvt_driver_init 3198: start
[ 2.402297] [NVT-ts-spi] nvt_ts_probe 2284: start
[ 2.402308] [NVT-ts-spi] nvt_parse_dt 984: novatek,reset-gpio=1145
[ 2.402311] [NVT-ts-spi] nvt_parse_dt 987: novatek,irq-gpio=1146
[ 2.402314] [NVT-ts-spi] nvt_parse_dt 994: SWRST_N8_ADDR=0x03F0FE
[ 2.402316] [NVT-ts-spi] nvt_parse_dt 1003: SPI_RD_FAST_ADDR=0x03F310
[ 2.402318] [NVT-ts-spi] nvt_parse_dt 1011: config-array-size: 2
[ 2.402320] [NVT-ts-spi] nvt_parse_dt 1019: spi-max-frequency: 10000000
[ 2.402322] [NVT-ts-spi] nvt_parse_dt 1041: tp vendor: 70
[ 2.402323] [NVT-ts-spi] nvt_parse_dt 1049: tp hw version: 54
[ 2.402325] [NVT-ts-spi] nvt_parse_dt 1066: fw_name:
novatek_nt36672c_j17_fw01.bin
[ 2.402327] [NVT-ts-spi] nvt_parse_dt 1074: mp_name:
novatek_nt36672c_j17_mp01.bin
[ 2.402329] [NVT-ts-spi] nvt_parse_dt 1041: tp vendor: 83
[ 2.402331] [NVT-ts-spi] nvt_parse_dt 1049: tp hw version: 66
[ 2.402333] [NVT-ts-spi] nvt_parse_dt 1066: fw_name:
novatek_nt36672c_j17_fw02.bin
[ 2.402335] [NVT-ts-spi] nvt_parse_dt 1074: mp_name:
novatek_nt36672c_j17_mp02.bin
[ 2.402337] [NVT-ts-spi] nvt_parse_dt 1032: parse 2 config down
[ 2.402341] [NVT-ts-spi] nvt_ts_probe 2365: mode=0, max_speed_hz=10000000
[ 2.402373] [NVT-ts-spi] nvt_pinctrl_init 1644: nvt_pinctrl_init Enter
[ 2.402386] [NVT-ts-spi] nvt_ts_probe 2379: Request GPIO
[ 2.402395] [NVT-ts-spi] nvt_gpio_config 1206: nvt_gpio_config Exit
[ 2.402397] [NVT-ts-spi] nvt_eng_reset 422: nvt_eng_reset
[ 2.402399] [NVT-ts-spi] nvt_write_addr 315: nvt_write_addr enter
[ 2.402576] spi_geni 880000.spi: tx_fifo 16 rx_fifo 16 tx_width 32
[ 2.402806] [NVT-ts-spi] nvt_eng_reset 424: nvt_eng_reset leave
[ 2.403810] [NVT-ts-spi] nvt_ts_probe 2396: gpio set complete
[ 2.406677] mmc0: new ultra high speed SDR104 SDXC card at address 59b4
[ 2.407445] sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3f)
latency=-1
[ 2.407452] sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc0)
latency=-1
[ 2.407466] mmcblk0: mmc0:59b4 USD00 118 GiB
[ 2.408314] mmcblk0: p1
[ 2.416030] [NVT-ts-spi] nvt_ts_probe 2401: start check chip
[ 2.416031] [NVT-ts-spi] nvt_write_addr 315: nvt_write_addr enter
[ 2.421217] [NVT-ts-spi] nvt_write_addr 315: nvt_write_addr enter
[ 2.421543] [NVT-ts-spi] nvt_ts_check_chip_ver_trim 1602: buf[1]=0x0C,
buf[2]=0x00, buf[3]=0x00, buf[4]=0x72, buf[5]=0x66, buf[6]=0x03
[ 2.421545] [NVT-ts-spi] nvt_ts_check_chip_ver_trim 1620: This is NVT touch IC
[ 2.421547] [NVT-ts-spi] nvt_ts_probe 2408: finish check chip
[ 2.421584] input: NVTCapacitiveTouchScreen as /devices/virtual/input/input4
[ 2.421628] [NVT-ts-spi] nvt_ts_probe 2465: int_trigger_type=1
[ 2.421759] [NVT-ts-spi] nvt_irq_enable 189: enable=0, desc->depth=1
[ 2.421761] [NVT-ts-spi] nvt_ts_probe 2474: request irq 400 succeed
[ 2.421977] [NVT-ts-spi] nvt_ts_probe 2511: NVT_TOUCH_ESD_PROTECT is 1
[ 2.422078] [NVT-ts-spi] nvt_flash_proc_init 884: Succeeded!
[ 2.422079] [NVT-ts-spi] nvt_flash_proc_init 887:
============================================================
[ 2.422081] [NVT-ts-spi] nvt_flash_proc_init 888: Create /proc/NVTSPI
[ 2.422083] [NVT-ts-spi] nvt_flash_proc_init 889:
============================================================
[ 2.422086] [NVT-ts-spi] nvt_extra_proc_init 630: create proc/nvt_fw_version
Succeeded!
[ 2.422088] [NVT-ts-spi] nvt_extra_proc_init 638: create proc/nvt_baseline
Succeeded!
[ 2.422091] [NVT-ts-spi] nvt_extra_proc_init 646: create proc/nvt_raw Succeeded!
[ 2.422093] [NVT-ts-spi] nvt_extra_proc_init 654: create proc/nvt_diff
Succeeded!
[ 2.422096] [NVT-ts-spi] nvt_extra_proc_init 662: create
proc/nvt_xiaomi_config_info Succeeded!
[ 2.422098] [NVT-ts-spi] nvt_extra_proc_init 670: create proc/tp_lockdown_info
Succeeded!
[ 2.422105] [NVT-ts-spi] nvt_mp_proc_init 2191: create /proc/nvt_selftest
Succeeded!
[ 2.422107] [NVT-ts-spi] nvt_mp_proc_init 2200: create /proc/tp_selftest
Succeeded!
[ 2.422110] [NVT-ts-spi] nvt_test_data_proc_init 2441: create proc/nvt_test_data
Succeeded!
[ 2.422135] [NVT-ts-spi] nvt_init_touchmode_data 1742:
nvt_init_touchmode_data,ENTER
[ 2.422138] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:0, set cur:0, get
cur:0, def:0 min:0 max:1
[ 2.422140] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:1, set cur:0, get
cur:0, def:0 min:0 max:1
[ 2.422142] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:2, set cur:0, get
cur:0, def:0 min:0 max:2
[ 2.422144] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:3, set cur:0, get
cur:0, def:0 min:0 max:2
[ 2.422146] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:4, set cur:0, get
cur:0, def:0 min:0 max:0
[ 2.422148] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:5, set cur:0, get
cur:0, def:0 min:0 max:0
[ 2.422150] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:6, set cur:0, get
cur:0, def:0 min:0 max:0
[ 2.422153] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:7, set cur:0, get
cur:0, def:2 min:0 max:3
[ 2.422154] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:8, set cur:0, get
cur:0, def:0 min:0 max:3
[ 2.422156] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:9, set cur:0, get
cur:0, def:0 min:0 max:0
[ 2.422158] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:10, set cur:0, get
cur:0, def:0 min:0 max:0
[ 2.422160] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:11, set cur:0, get
cur:0, def:0 min:0 max:0
[ 2.422162] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:12, set cur:0, get
cur:0, def:0 min:0 max:1
[ 2.422164] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:13, set cur:0, get
cur:0, def:0 min:0 max:0
[ 2.422166] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:14, set cur:0, get
cur:0, def:0 min:0 max:0
[ 2.422168] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:15, set cur:0, get
cur:0, def:0 min:0 max:0
[ 2.422170] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:16, set cur:0, get
cur:0, def:0 min:0 max:0
[ 2.422172] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:17, set cur:0, get
cur:0, def:0 min:0 max:0
[ 2.422174] [NVT-ts-spi] nvt_init_touchmode_data 1799: mode:18, set cur:0, get
cur:0, def:0 min:0 max:0
[ 2.422176] [mi-touch] xiaomitouch_register_modedata:
[ 2.422178] [NVT-ts-spi] nvt_ts_probe 2624: end
[ 2.422187] [NVT-ts-spi] nvt_irq_enable 189: enable=1, desc->depth=0
[ 2.422269] [NVT-ts-spi] nvt_driver_init 3211: finished
[ 2.425035] rmnet_ipa3 started initialization
[ 2.425184] RNDIS_IPA module is loaded.
[ 2.425467] msm notifier probed successfully
[ 2.425858] cfg80211: Loading compiled-in X.509 certificates for regulatory
database
[ 2.426675] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 2.427328] msm_bus_late_init: Remove handoff bw requests
[ 2.427731] regulator_proxy_consumer_remove_all: removing regulator proxy
consumer requests
[ 2.427866] ALSA device list:
[ 2.427868] No soundcards found.
[ 2.427887] Warning: unable to open an initial console.
[ 2.429221] Freeing unused kernel memory: 6144K
[ 2.429241] Run /init as init process
[ 2.441496] init: init first stage started!
[ 2.441538] init: Unable to open /lib/modules, skipping module loading.
[ 2.441552] init: First stage mount skipped (recovery mode)
[ 2.441699] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition vendor
[ 2.441710] init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt
[ 2.441765] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition vendor
[ 2.441815] init: [libfs_mgr]Warning: unknown flag: display="System"
[ 2.441822] init: [libfs_mgr]Warning: unknown flag: display="System_Ext"
[ 2.441828] init: [libfs_mgr]Warning: unknown flag: display="Product"
[ 2.441834] init: [libfs_mgr]Warning: unknown flag: display="Vendor"
[ 2.481091] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 2.481101] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=699978
[ 2.481107] FCC_MAIN: current vote is now 699978 voted by FCC_STEPPER_VOTER,1,
previous voted 599978
[ 2.481115] pm7250b_charger: is_cp_topo_vbatt: true
[ 2.481132] pm7250b_charger: smblib_set_charge_param: fast charge current =
699978 (0x0d)
[ 2.581060] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 2.581067] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=799978
[ 2.581072] FCC_MAIN: current vote is now 799978 voted by FCC_STEPPER_VOTER,1,
previous voted 699978
[ 2.581078] pm7250b_charger: is_cp_topo_vbatt: true
[ 2.581096] pm7250b_charger: smblib_set_charge_param: fast charge current =
799978 (0x0f)
[ 2.681053] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 2.681060] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=899978
[ 2.681065] FCC_MAIN: current vote is now 899978 voted by FCC_STEPPER_VOTER,1,
previous voted 799978
[ 2.681070] pm7250b_charger: is_cp_topo_vbatt: true
[ 2.681087] pm7250b_charger: smblib_set_charge_param: fast charge current =
899978 (0x11)
[ 2.781054] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 2.781060] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=999978
[ 2.781065] FCC_MAIN: current vote is now 999978 voted by FCC_STEPPER_VOTER,1,
previous voted 899978
[ 2.781069] pm7250b_charger: is_cp_topo_vbatt: true
[ 2.781084] pm7250b_charger: smblib_set_charge_param: fast charge current =
999978 (0x13)
[ 2.880605] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: Requested
PR_SWAP 0
[ 2.880614] AWAKE: DETACH_DETECT_VOTER,0 voting on of val=1
[ 2.880665] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: restore power
role: 1
[ 2.880708] pm7250b_charger: smblib_usb_pd_adapter_allowance_override: set
USBIN_ALLOW_OVERRIDE: 1
[ 2.881082] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 2.881088] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=1099978
[ 2.881093] FCC_MAIN: current vote is now 1099978 voted by FCC_STEPPER_VOTER,1,
previous voted 999978
[ 2.881097] pm7250b_charger: is_cp_topo_vbatt: true
[ 2.881115] pm7250b_charger: smblib_set_charge_param: fast charge current =
1099978 (0x15)
[ 2.881270] PL_AWAKE: FCC_STEPPER_VOTER,0 voting off of val=0
[ 2.881276] PL_AWAKE: current vote is now 0 voted by FCC_STEPPER_VOTER,0,
previous voted 1
[ 2.881284] PL_AWAKE: FCC_STEPPER_VOTER,0 voting on of val=1
[ 2.881288] PL_AWAKE: current vote is now 1 voted by FCC_STEPPER_VOTER,0,
previous voted 0
[ 2.881308] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 2.881352] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 2.881360] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 2.881368] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 2.881475] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: Requested
PR_SWAP 0
[ 2.881522] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: restore power
role: 1
[ 2.881718] pm7250b_charger: smblib_run_aicl: re-running AICL
[ 2.881744] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 2.882780] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 2.882787] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=1199978
[ 2.882792] FCC_MAIN: current vote is now 1199978 voted by FCC_STEPPER_VOTER,1,
previous voted 1099978
[ 2.882797] pm7250b_charger: is_cp_topo_vbatt: true
[ 2.882815] pm7250b_charger: smblib_set_charge_param: fast charge current =
1199978 (0x17)
[ 2.883666] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 2.886103] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 2.886557] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
irq_status = 0x2
[ 2.900101] AWAKE: DETACH_DETECT_VOTER,0 voting off of val=0
[ 2.981056] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 2.981062] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=1299978
[ 2.981067] FCC_MAIN: current vote is now 1299978 voted by FCC_STEPPER_VOTER,1,
previous voted 1199978
[ 2.981071] pm7250b_charger: is_cp_topo_vbatt: true
[ 2.981086] pm7250b_charger: smblib_set_charge_param: fast charge current =
1299978 (0x19)
[ 3.081056] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 3.081062] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=1399978
[ 3.081067] FCC_MAIN: current vote is now 1399978 voted by FCC_STEPPER_VOTER,1,
previous voted 1299978
[ 3.081072] pm7250b_charger: is_cp_topo_vbatt: true
[ 3.081087] pm7250b_charger: smblib_set_charge_param: fast charge current =
1399978 (0x1b)
[ 3.181053] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 3.181060] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=1499978
[ 3.181065] FCC_MAIN: current vote is now 1499978 voted by FCC_STEPPER_VOTER,1,
previous voted 1399978
[ 3.181069] pm7250b_charger: is_cp_topo_vbatt: true
[ 3.181087] pm7250b_charger: smblib_set_charge_param: fast charge current =
1499978 (0x1d)
[ 3.281047] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 3.281054] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=1599978
[ 3.281059] FCC_MAIN: current vote is now 1599978 voted by FCC_STEPPER_VOTER,1,
previous voted 1499978
[ 3.281063] pm7250b_charger: is_cp_topo_vbatt: true
[ 3.281081] pm7250b_charger: smblib_set_charge_param: fast charge current =
1599978 (0x1f)
[ 3.381059] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 3.381066] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=1699978
[ 3.381071] FCC_MAIN: current vote is now 1699978 voted by FCC_STEPPER_VOTER,1,
previous voted 1599978
[ 3.381076] pm7250b_charger: is_cp_topo_vbatt: true
[ 3.381093] pm7250b_charger: smblib_set_charge_param: fast charge current =
1699978 (0x21)
[ 3.424053] [NVT-ts-spi] get_lockdown_info 2250: lkdown_readed = 0
[ 3.424080] mi-dsi-panel:[dsi_panel_get_lockdown_from_cmdline:642] lockdown info
from cmdline = 0x46,0x36,0x32,0x01,0x4a,0x14,0x31,0x00
[ 3.424090] [NVT-ts-spi] get_lockdown_info 2258:
Lockdown:0x46,0x36,0x32,0x01,0x4a,0x14,0x31,0x00
[ 3.424097] [NVT-ts-spi] get_lockdown_info 2261: READ LOCKDOWN!!!
[ 3.481057] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 3.481066] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=1799978
[ 3.481071] FCC_MAIN: current vote is now 1799978 voted by FCC_STEPPER_VOTER,1,
previous voted 1699978
[ 3.481075] pm7250b_charger: is_cp_topo_vbatt: true
[ 3.481090] pm7250b_charger: smblib_set_charge_param: fast charge current =
1799978 (0x23)
[ 3.581045] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 3.581051] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=1899978
[ 3.581057] FCC_MAIN: current vote is now 1899978 voted by FCC_STEPPER_VOTER,1,
previous voted 1799978
[ 3.581061] pm7250b_charger: is_cp_topo_vbatt: true
[ 3.581079] pm7250b_charger: smblib_set_charge_param: fast charge current =
1899978 (0x25)
[ 3.681053] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 3.681059] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=1999978
[ 3.681064] FCC_MAIN: current vote is now 1999978 voted by FCC_STEPPER_VOTER,1,
previous voted 1899978
[ 3.681069] pm7250b_charger: is_cp_topo_vbatt: true
[ 3.681087] pm7250b_charger: smblib_set_charge_param: fast charge current =
1999978 (0x27)
[ 3.781057] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 3.781063] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=2099978
[ 3.781068] FCC_MAIN: current vote is now 2099978 voted by FCC_STEPPER_VOTER,1,
previous voted 1999978
[ 3.781072] pm7250b_charger: is_cp_topo_vbatt: true
[ 3.781090] pm7250b_charger: smblib_set_charge_param: fast charge current =
2099978 (0x29)
[ 3.881050] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 3.881057] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=2199978
[ 3.881062] FCC_MAIN: current vote is now 2199978 voted by FCC_STEPPER_VOTER,1,
previous voted 2099978
[ 3.881067] pm7250b_charger: is_cp_topo_vbatt: true
[ 3.881085] pm7250b_charger: smblib_set_charge_param: fast charge current =
2199978 (0x2b)
[ 3.981045] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 3.981052] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=2299978
[ 3.981057] FCC_MAIN: current vote is now 2299978 voted by FCC_STEPPER_VOTER,1,
previous voted 2199978
[ 3.981062] pm7250b_charger: is_cp_topo_vbatt: true
[ 3.981079] pm7250b_charger: smblib_set_charge_param: fast charge current =
2299978 (0x2d)
[ 4.066831] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: Requested
PR_SWAP 0
[ 4.066839] AWAKE: DETACH_DETECT_VOTER,0 voting on of val=1
[ 4.066889] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: restore power
role: 1
[ 4.067358] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: Requested
PR_SWAP 0
[ 4.067409] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: restore power
role: 1
[ 4.081050] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 4.081056] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=2399978
[ 4.081061] FCC_MAIN: current vote is now 2399978 voted by FCC_STEPPER_VOTER,1,
previous voted 2299978
[ 4.081066] pm7250b_charger: is_cp_topo_vbatt: true
[ 4.081081] pm7250b_charger: smblib_set_charge_param: fast charge current =
2399978 (0x2f)
[ 4.084054] AWAKE: DETACH_DETECT_VOTER,0 voting off of val=0
[ 4.181051] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 4.181058] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=2499978
[ 4.181064] FCC_MAIN: current vote is now 2499978 voted by FCC_STEPPER_VOTER,1,
previous voted 2399978
[ 4.181069] pm7250b_charger: is_cp_topo_vbatt: true
[ 4.181083] pm7250b_charger: smblib_set_charge_param: fast charge current =
2499978 (0x31)
[ 4.281055] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 4.281062] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=2599978
[ 4.281067] FCC_MAIN: current vote is now 2599978 voted by FCC_STEPPER_VOTER,1,
previous voted 2499978
[ 4.281072] pm7250b_charger: is_cp_topo_vbatt: true
[ 4.281090] pm7250b_charger: smblib_set_charge_param: fast charge current =
2599978 (0x33)
[ 4.320054] of_batterydata_get_best_profile: J17_cosmx_4820mah found
[ 4.320060] QCOM-STEPCHG: read_range_data_from_node: Count qcom,step-chg-ranges
failed, rc=-22
[ 4.381059] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 4.381066] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=2699978
[ 4.381071] FCC_MAIN: current vote is now 2699978 voted by FCC_STEPPER_VOTER,1,
previous voted 2599978
[ 4.381075] pm7250b_charger: is_cp_topo_vbatt: true
[ 4.381090] pm7250b_charger: smblib_set_charge_param: fast charge current =
2699978 (0x35)
[ 4.448752] init: 12 output lines suppressed due to ratelimiting
[ 4.481056] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 4.481066] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=2799978
[ 4.481071] FCC_MAIN: current vote is now 2799978 voted by FCC_STEPPER_VOTER,1,
previous voted 2699978
[ 4.481078] pm7250b_charger: is_cp_topo_vbatt: true
[ 4.481095] pm7250b_charger: smblib_set_charge_param: fast charge current =
2799978 (0x37)
[ 4.483746] init: [libfs_mgr]dt_fstab: Skip disabled entry for partition vendor
[ 4.483792] init: [libfs_mgr]Warning: unknown flag: display="System"
[ 4.483800] init: [libfs_mgr]Warning: unknown flag: display="System_Ext"
[ 4.483806] init: [libfs_mgr]Warning: unknown flag: display="Product"
[ 4.483811] init: [libfs_mgr]Warning: unknown flag: display="Vendor"
[ 4.483818] init: [libfs_mgr]Warning: unknown flag: display="Metadata"
[ 4.484048] init: DM_DEV_STATUS failed for system_ext: No such device or address
[ 4.484053] init: Could not update logical partition
[ 4.484136] init: DM_DEV_STATUS failed for product: No such device or address
[ 4.484139] init: Could not update logical partition
[ 4.489736] SELinux: policy capability network_peer_controls=1
[ 4.489740] SELinux: policy capability open_perms=1
[ 4.489742] SELinux: policy capability extended_socket_class=1
[ 4.489744] SELinux: policy capability always_check_network=0
[ 4.489745] SELinux: policy capability cgroup_seclabel=0
[ 4.489747] SELinux: policy capability nnp_nosuid_transition=1
[ 4.525870] audit: type=1403 audit(56902136.919:2): auid=4294967295
ses=4294967295 lsm=selinux res=1
[ 4.527838] init: 4 output lines suppressed due to ratelimiting
[ 4.539637] init: init second stage started!
[ 4.548517] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 4.549202] init: Overriding previous property 'persist.sys.usb.config':'adb'
with new value 'none'
[ 4.549677] init: Couldn't load property file '/system/build.prop': open()
failed: No such file or directory: No such file or directory
[ 4.549689] init: Couldn't load property file '/system_ext/etc/build.prop':
open() failed: No such file or directory: No such file or directory
[ 4.549698] init: Couldn't load property file '/system_ext/default.prop': open()
failed: No such file or directory: No such file or directory
[ 4.549705] init: Couldn't load property file '/system_ext/build.prop': open()
failed: No such file or directory: No such file or directory
[ 4.549713] init: Couldn't load property file '/system_ext/default.prop': open()
failed: No such file or directory: No such file or directory
[ 4.549719] init: Couldn't load property file '/system_ext/build.prop': open()
failed: No such file or directory: No such file or directory
[ 4.549727] init: Couldn't load property file '/vendor/default.prop': open()
failed: No such file or directory: No such file or directory
[ 4.581092] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 4.581108] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=2899978
[ 4.581113] FCC_MAIN: current vote is now 2899978 voted by FCC_STEPPER_VOTER,1,
previous voted 2799978
[ 4.581121] pm7250b_charger: is_cp_topo_vbatt: true
[ 4.581143] pm7250b_charger: smblib_set_charge_param: fast charge current =
2899978 (0x39)
[ 4.586508] audit: type=1400 audit(56902136.979:3): avc: denied { sys_nice }
for pid=515 comm="ueventd" capability=23 scontext=u:r:ueventd:s0
tcontext=u:r:ueventd:s0 tclass=capability permissive=1
[ 4.586588] ueventd: ueventd started!
[ 4.587280] selinux: SELinux: Loaded file_contexts
[ 4.587284] selinux:
[ 4.587342] ueventd: Parsing file /system/etc/ueventd.rc...
[ 4.587364] ueventd: Added '/vendor/etc/ueventd.rc' to import list
[ 4.587369] ueventd: Added '/odm/etc/ueventd.rc' to import list
[ 4.587464] ueventd: Parsing file /vendor/etc/ueventd.rc...
[ 4.587474] ueventd: Unable to read config file '/vendor/etc/ueventd.rc': open()
failed: No such file or directory
[ 4.587480] ueventd: Parsing file /odm/etc/ueventd.rc...
[ 4.587487] ueventd: Unable to read config file '/odm/etc/ueventd.rc': open()
failed: No such file or directory
[ 4.610882] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
irq_status = 0x2
[ 4.625944] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start
0...
[ 4.625952] [ds28e16] ds28el16_get_page_status_retry: read page status
communication start... 0
[ 4.625956] [ds28e16] ds28el16_get_page_data_retry: flag_mi_page0_data is 1
[ 4.625958] [ds28e16] ds28el16_get_page_data_retry: mi_page0_data data:
[ 4.625961] [ds28e16] ds28el16_get_page_data_retry: 43 42 4d 34 57 30 39 4d 00
26 c1 47 4d 44 31 31
[ 4.625964] [ds28e16] verify_get_property: unsupported property 227
[ 4.625967] [ds28e16] verify_get_property: unsupported property 228
[ 4.625968] [ds28e16] verify_get_property: unsupported property 229
[ 4.625970] [ds28e16] verify_get_property: unsupported property 230
[ 4.625972] [ds28e16] verify_get_property: unsupported property 231
[ 4.625973] [ds28e16] ds28el16_get_page_data_retry: flag_mi_page0_data is 1
[ 4.625975] [ds28e16] ds28el16_get_page_data_retry: mi_page0_data data:
[ 4.625977] [ds28e16] ds28el16_get_page_data_retry: 43 42 4d 34 57 30 39 4d 00
26 c1 47 4d 44 31 31
[ 4.625979] [ds28e16] ds28el16_get_page_data_retry: flag_mi_page0_data is 1
[ 4.625982] [ds28e16] ds28el16_get_page_data_retry: mi_page0_data data:
[ 4.625984] [ds28e16] ds28el16_get_page_data_retry: 43 42 4d 34 57 30 39 4d 00
26 c1 47 4d 44 31 31
[ 4.625985] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start
0...
[ 4.625989] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start
0...
[ 4.681075] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 4.681086] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=2999978
[ 4.681092] FCC_MAIN: current vote is now 2999978 voted by FCC_STEPPER_VOTER,1,
previous voted 2899978
[ 4.681099] pm7250b_charger: is_cp_topo_vbatt: true
[ 4.681120] pm7250b_charger: smblib_set_charge_param: fast charge current =
2999978 (0x3b)
[ 4.681158] [ds28e16] ds28el16_get_page_data_retry: flag_mi_page0_data is 1
[ 4.681160] [ds28e16] ds28el16_get_page_data_retry: mi_page0_data data:
[ 4.681162] [ds28e16] ds28el16_get_page_data_retry: 43 42 4d 34 57 30 39 4d 00
26 c1 47 4d 44 31 31
[ 4.684931] QG-K: qg_get_prop_soc_decimal: debug soc_dec=0 dec_rate=28
last_val=50 last_soc_dec=0 last_hal_soc=72
[ 4.684935] QG-K: qg_get_prop_soc_decimal: debug val=57 soc_dec=0 sys_soc=0
dec_rate=28 soc=72 hal_soc=72 last_val=57 last_soc_dec=0 last_hal_soc=72
[ 4.686921] QG-K: qg_psy_get_property: get battery temp = 289
[ 4.687070] QG-K: qg_get_maxim_authentic: get maxim_authentic = 1
[ 4.687073] [ds28e16] ds28el16_Read_RomID_retry: read rom id communication start
0...
[ 4.687075] QG-K: qg_get_maxim_chipok: get maxim_chip_ok = 1
[ 4.781077] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 4.781092] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=3099978
[ 4.781097] FCC_MAIN: current vote is now 3099978 voted by FCC_STEPPER_VOTER,1,
previous voted 2999978
[ 4.781105] pm7250b_charger: is_cp_topo_vbatt: true
[ 4.781126] pm7250b_charger: smblib_set_charge_param: fast charge current =
3099978 (0x3d)
[ 4.784279] audit: type=1400 audit(56902137.179:4): avc: denied
{ module_request } for pid=1 comm="init" kmod="fs-binder" scontext=u:r:init:s0
tcontext=u:r:kernel:s0 tclass=system permissive=1
[ 4.785938] audit: type=1400 audit(56902137.179:5): avc: denied { entrypoint }
for pid=526 comm="init" path="/system/bin/logd" dev="rootfs" ino=13690
scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 4.787305] audit: type=1400 audit(56902137.179:6): avc: denied { map } for
pid=526 comm="logd" path="/system/bin/logd" dev="rootfs" ino=13690
scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 4.787314] audit: type=1400 audit(56902137.179:7): avc: denied { read } for
pid=526 comm="logd" path="/system/bin/logd" dev="rootfs" ino=13690
scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 4.787355] audit: type=1400 audit(56902137.179:8): avc: denied { execute }
for pid=526 comm="logd" path="/system/bin/logd" dev="rootfs" ino=13690
scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 4.788343] audit: type=1400 audit(56902137.183:9): avc: denied { getattr }
for pid=526 comm="logd" path="/system/bin/logd" dev="rootfs" ino=13690
scontext=u:r:logd:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 4.788719] audit: type=1400 audit(56902137.183:10): avc: denied { read } for
pid=526 comm="logd" name="bin" dev="rootfs" ino=13585 scontext=u:r:logd:s0
tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
[ 4.797636] Mass Storage Function, version: 2009/09/11
[ 4.797645] LUN: removable file: (no medium)
[ 4.797710] file system registered
[ 4.799264] logd: libprocessgroup: Failed to read task profiles from
/etc/task_profiles.json
[ 4.799322] logd: libprocessgroup: Loading /etc/task_profiles.json for [526]
failed
[ 4.799442] logd: libprocessgroup: Failed to find SCHED_SP_BACKGROUNDtask
profile: No such file or directory
[ 4.799496] logd: Cannot read /system/etc/event-log-tags
[ 4.800401] logd.auditd: start
[ 4.800424] logd.klogd: 4800408747
[ 4.803353] binder: 530:530 ioctl 40046210 7ff50aa554 returned -22
[ 4.803684] binder: 529:529 ioctl 40046210 7feb426524 returned -22
[ 4.814328] type=1400 audit(56902137.195:15): avc: denied { read } for
comm="vndservicemanag" name="vndbinder" dev="tmpfs" ino=27380
scontext=u:r:recovery:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file
permissive=1
[ 4.814384] type=1400 audit(56902137.195:16): avc: denied { write } for
comm="vndservicemanag" name="vndbinder" dev="tmpfs" ino=27380
scontext=u:r:recovery:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file
permissive=1
[ 4.814604] type=1400 audit(56902137.195:17): avc: denied { open } for
comm="vndservicemanag" path="/dev/vndbinder" dev="tmpfs" ino=27380
scontext=u:r:recovery:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file
permissive=1
[ 4.814788] type=1400 audit(56902137.195:18): avc: denied { ioctl } for
comm="vndservicemanag" path="/dev/vndbinder" dev="tmpfs" ino=27380 ioctlcmd=0x6209
scontext=u:r:recovery:s0 tcontext=u:object_r:vndbinder_device:s0 tclass=chr_file
permissive=1
[ 4.821901] binder: 535:535 ioctl 40046210 7fc43ab574 returned -22
[ 4.823740] binder: 527:527 ioctl 40046210 7ffce1adc4 returned -22
[ 4.827862] binder: 538:538 ioctl 40046210 7fecc987a4 returned -22
[ 4.831798] healthd: batteryCapacityLevelPath not found
[ 4.832293] binder: 528:528 ioctl 40046210 7ff05677f4 returned -22
[ 4.834300] Alarmtimer { [email protected]', '64834'}
[ 4.836909] healthd: battery l=72 v=4085 t=29.0 h=2 st=2 c=205 tl=0 ct=USB chg=u
[ 4.836935] healthd: battery l=72 v=4085 t=29.0 h=2 st=2 c=205 tl=0 ct=USB chg=u
[ 4.839223] healthd: battery l=72 v=4082 t=29.0 h=2 st=2 c=270 tl=0 ct=USB chg=u
[ 4.842482] binder: 528:528 ioctl 40046210 7ff0566c24 returned -22
[ 4.856534] [drm:dsi_bridge_mode_set] [msm-dsi-info]: clk_rate: 819957600
[ 4.856933] [drm:dsi_display_set_mode] [msm-dsi-info]: mdp_transfer_time_us=0 us
[ 4.856941] [drm:dsi_display_set_mode] [msm-dsi-info]: hactive= 1080,vactive=
2400,fps=60
[ 4.857178] thermal_sys: screen_state_for_thermal_callback: MI_DRM_BLANK_UNBLANK
[ 4.857201] [NVT-ts-spi] nvt_drm_notifier_callback 3050: event=1, *blank=0
[ 4.857240] [NVT-ts-spi] nvt_ts_resume 2955: Touch is already resume
[ 4.857247] [NVT-ts-spi] nvt_update_firmware 1069: update_firmware_request
failed. (-2)
[ 4.857251] [NVT-ts-spi] nvt_ts_resume 3023: end
[ 4.861559] binder: 557:557 ioctl 40046210 7febfbfc54 returned -22
[ 4.865784] [drm:dsi_panel_set_backlight] [msm-dsi-info]: backlight type:1
lvl:1200
[ 4.865803] WLED: wled5_set_brightness: wled config dbv:200, pwm:3111:4095
[ 4.877043] [drm:dsi_panel_set_backlight] [msm-dsi-info]: crc off
[ 4.881135] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 4.881150] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=3199978
[ 4.881156] FCC_MAIN: current vote is now 3199978 voted by FCC_STEPPER_VOTER,1,
previous voted 3099978
[ 4.881164] pm7250b_charger: is_cp_topo_vbatt: true
[ 4.881185] pm7250b_charger: smblib_set_charge_param: fast charge current =
3199978 (0x3f)
[ 4.883690] binder: 556:556 ioctl 40046210 7fead414c4 returned -22
[ 4.915612] [drm:dsi_panel_set_backlight] [msm-dsi-info]: backlight type:1
lvl:1200
[ 4.981058] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 4.981074] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=3299978
[ 4.981080] FCC_MAIN: current vote is now 3299978 voted by FCC_STEPPER_VOTER,1,
previous voted 3199978
[ 4.981088] pm7250b_charger: is_cp_topo_vbatt: true
[ 4.981108] pm7250b_charger: smblib_set_charge_param: fast charge current =
3299978 (0x41)
[ 4.996070] mi-dsi-panel:[dsi_panel_disp_param_set:1008] param_type = 0xd00
[ 4.996083] mi-dsi-panel:[dsi_panel_disp_param_set:1106] panel cabc dimming
[ 5.081067] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 5.081083] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=3399978
[ 5.081088] FCC_MAIN: current vote is now 3399978 voted by FCC_STEPPER_VOTER,1,
previous voted 3299978
[ 5.081096] pm7250b_charger: is_cp_topo_vbatt: true
[ 5.081115] pm7250b_charger: smblib_set_charge_param: fast charge current =
3399978 (0x43)
[ 5.181055] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 5.181068] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=3499978
[ 5.181074] FCC_MAIN: current vote is now 3499978 voted by FCC_STEPPER_VOTER,1,
previous voted 3399978
[ 5.181080] pm7250b_charger: is_cp_topo_vbatt: true
[ 5.181096] pm7250b_charger: smblib_set_charge_param: fast charge current =
3499978 (0x45)
[ 5.252727] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: Requested
PR_SWAP 0
[ 5.252743] AWAKE: DETACH_DETECT_VOTER,0 voting on of val=1
[ 5.252796] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: restore power
role: 1
[ 5.253298] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: Requested
PR_SWAP 0
[ 5.253349] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: restore power
role: 1
[ 5.272070] AWAKE: DETACH_DETECT_VOTER,0 voting off of val=0
[ 5.281087] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 5.281099] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=3599978
[ 5.281105] FCC_MAIN: current vote is now 3599978 voted by FCC_STEPPER_VOTER,1,
previous voted 3499978
[ 5.281112] pm7250b_charger: is_cp_topo_vbatt: true
[ 5.281131] pm7250b_charger: smblib_set_charge_param: fast charge current =
3599978 (0x47)
[ 5.381075] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 5.381088] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=3699978
[ 5.381093] FCC_MAIN: current vote is now 3699978 voted by FCC_STEPPER_VOTER,1,
previous voted 3599978
[ 5.381100] pm7250b_charger: is_cp_topo_vbatt: true
[ 5.381119] pm7250b_charger: smblib_set_charge_param: fast charge current =
3699978 (0x49)
[ 5.425025] audit_log_start: 4 callbacks suppressed
[ 5.425026] audit: audit_backlog=65 > audit_backlog_limit=64
[ 5.425033] audit: audit_lost=1 audit_rate_limit=0 audit_backlog_limit=64
[ 5.425035] audit: backlog limit exceeded
[ 5.425049] audit: audit_backlog=65 > audit_backlog_limit=64
[ 5.425051] audit: audit_lost=2 audit_rate_limit=0 audit_backlog_limit=64
[ 5.425053] audit: backlog limit exceeded
[ 5.425055] audit: audit_backlog=65 > audit_backlog_limit=64
[ 5.425057] audit: audit_lost=3 audit_rate_limit=0 audit_backlog_limit=64
[ 5.425059] audit: backlog limit exceeded
[ 5.425061] audit: audit_backlog=65 > audit_backlog_limit=64
[ 5.436103] EXT4-fs (sda23): mounted filesystem with ordered data mode. Opts:
barrier=1
[ 5.437224] [drm:dsi_panel_set_backlight] [msm-dsi-info]: backlight type:1
lvl:1200
[ 5.439084] SELinux: Context u:object_r:vendor_persist_time_file:s0 is not
valid (left unmapped).
[ 5.466177] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 5.474864] EXT4-fs (dm-0): mounted filesystem without journal. Opts:
barrier=1,discard
[ 5.475272] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 5.481095] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 5.481107] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=3799978
[ 5.481113] FCC_MAIN: current vote is now 3799978 voted by FCC_STEPPER_VOTER,1,
previous voted 3699978
[ 5.481121] pm7250b_charger: is_cp_topo_vbatt: true
[ 5.481142] pm7250b_charger: smblib_set_charge_param: fast charge current =
3799978 (0x4b)
[ 5.482624] EXT4-fs (dm-1): mounted filesystem without journal. Opts:
barrier=1,discard
[ 5.483196] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 5.490339] EXT4-fs (dm-2): mounted filesystem without journal. Opts:
barrier=1,discard
[ 5.490667] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 5.498136] EXT4-fs (dm-3): mounted filesystem without journal. Opts:
barrier=1,discard
[ 5.506352] F2FS-fs (sda35): Reduce reserved blocks for root = 24264
[ 5.521494] F2FS-fs (sda35): Found nat_bits in checkpoint
[ 5.580890] F2FS-fs (sda35): Mounted with checkpoint version = 23c72348
[ 5.581043] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 5.581056] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=3899978
[ 5.581064] FCC_MAIN: current vote is now 3899978 voted by FCC_STEPPER_VOTER,1,
previous voted 3799978
[ 5.581072] pm7250b_charger: is_cp_topo_vbatt: true
[ 5.581089] pm7250b_charger: smblib_set_charge_param: fast charge current =
3899978 (0x4d)
[ 5.605159] F2FS-fs (sda35): Reduce reserved blocks for root = 24264
[ 5.622194] F2FS-fs (sda35): Found nat_bits in checkpoint
[ 5.681036] F2FS-fs (sda35): Mounted with checkpoint version = 23c7234a
[ 5.681043] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 5.681049] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=3999978
[ 5.681057] FCC_MAIN: current vote is now 3999978 voted by FCC_STEPPER_VOTER,1,
previous voted 3899978
[ 5.681064] pm7250b_charger: is_cp_topo_vbatt: true
[ 5.681084] pm7250b_charger: smblib_set_charge_param: fast charge current =
3999978 (0x4f)
[ 5.781051] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 5.781060] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=4099978
[ 5.781065] FCC_MAIN: current vote is now 4099978 voted by FCC_STEPPER_VOTER,1,
previous voted 3999978
[ 5.781071] pm7250b_charger: is_cp_topo_vbatt: true
[ 5.781090] pm7250b_charger: smblib_set_charge_param: fast charge current =
4099978 (0x51)
[ 5.881047] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 5.881054] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=4199978
[ 5.881059] FCC_MAIN: current vote is now 4199978 voted by FCC_STEPPER_VOTER,1,
previous voted 4099978
[ 5.881064] pm7250b_charger: is_cp_topo_vbatt: true
[ 5.881082] pm7250b_charger: smblib_set_charge_param: fast charge current =
4199978 (0x53)
[ 5.981031] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 5.981037] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=4299978
[ 5.981042] FCC_MAIN: current vote is now 4299978 voted by FCC_STEPPER_VOTER,1,
previous voted 4199978
[ 5.981047] pm7250b_charger: is_cp_topo_vbatt: true
[ 5.981061] pm7250b_charger: smblib_set_charge_param: fast charge current =
4299978 (0x55)
[ 6.081039] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 6.081046] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=4399978
[ 6.081051] FCC_MAIN: current vote is now 4399978 voted by FCC_STEPPER_VOTER,1,
previous voted 4299978
[ 6.081056] pm7250b_charger: is_cp_topo_vbatt: true
[ 6.081070] pm7250b_charger: smblib_set_charge_param: fast charge current =
4399978 (0x57)
[ 6.181026] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 6.181033] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=4499978
[ 6.181038] FCC_MAIN: current vote is now 4499978 voted by FCC_STEPPER_VOTER,1,
previous voted 4399978
[ 6.181042] pm7250b_charger: is_cp_topo_vbatt: true
[ 6.181060] pm7250b_charger: smblib_set_charge_param: fast charge current =
4499978 (0x59)
[ 6.281055] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 6.281062] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=4599978
[ 6.281066] FCC_MAIN: current vote is now 4599978 voted by FCC_STEPPER_VOTER,1,
previous voted 4499978
[ 6.281071] pm7250b_charger: is_cp_topo_vbatt: true
[ 6.281089] pm7250b_charger: smblib_set_charge_param: fast charge current =
4599978 (0x5b)
[ 6.381047] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 6.381053] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=4699978
[ 6.381058] FCC_MAIN: current vote is now 4699978 voted by FCC_STEPPER_VOTER,1,
previous voted 4599978
[ 6.381063] pm7250b_charger: is_cp_topo_vbatt: true
[ 6.381081] pm7250b_charger: smblib_set_charge_param: fast charge current =
4699978 (0x5d)
[ 6.438718] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: Requested
PR_SWAP 0
[ 6.438728] AWAKE: DETACH_DETECT_VOTER,0 voting on of val=1
[ 6.438779] pm7250b_charger: smblib_set_prop_pr_swap_in_progress: restore power
role: 1
[ 6.438882] PL_DISABLE: PL_SMB_EN_VOTER,7 voting on of val=1
[ 6.438888] SMB_EN_OVERRIDE: PL_SMB_EN_VOTER,0 voting on of val=1
[ 6.438893] SMB_EN_OVERRIDE: current vote is now 1 voted by PL_SMB_EN_VOTER,0,
previous voted 0
[ 6.438957] pm7250b_charger: smblib_usb_pd_adapter_allowance_override: set
USBIN_ALLOW_OVERRIDE: 0
[ 6.439000] pm7250b_charger: smblib_update_usb_type: usb_online=1 QC3P5=0
[ 6.439004] pm7250b_charger: smblib_update_usb_type: APSD=SDP PD=0 QC3P5=0
[ 6.439088] usbpd usbpd0: typec mode:8 type:4
[ 6.439741] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 6.439751] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 6.439759] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 6.440224] pm7250b_charger: smblib_run_aicl: re-running AICL
[ 6.440254] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 6.441010] FCC: JEITA_VOTER,5 voting on of val=6000000
[ 6.441019] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 289 FCC = 6000000uA FV =
4470000uV
[ 6.441027] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 289 max voltage= 4470000uv
FV = 4470000uV
[ 6.441963] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 6.445584] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 6.449747] healthd: battery l=72 v=4121 t=28.9 h=2 st=2 c=-316 tl=0 ct=USB
chg=u
[ 6.449840] healthd: battery l=72 v=4121 t=28.9 h=2 st=2 c=-316 tl=0 ct=USB
chg=u
[ 6.452954] healthd: battery l=72 v=4121 t=28.9 h=2 st=2 c=-316 tl=0 ct=USB
chg=u
[ 6.456064] AWAKE: DETACH_DETECT_VOTER,0 voting off of val=0
[ 6.481043] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 6.481051] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=4799978
[ 6.481056] FCC_MAIN: current vote is now 4799978 voted by FCC_STEPPER_VOTER,1,
previous voted 4699978
[ 6.481062] pm7250b_charger: is_cp_topo_vbatt: true
[ 6.481081] pm7250b_charger: smblib_set_charge_param: fast charge current =
4799978 (0x5f)
[ 6.581042] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 6.581049] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=4899978
[ 6.581054] FCC_MAIN: current vote is now 4899978 voted by FCC_STEPPER_VOTER,1,
previous voted 4799978
[ 6.581058] pm7250b_charger: is_cp_topo_vbatt: true
[ 6.581074] pm7250b_charger: smblib_set_charge_param: fast charge current =
4899978 (0x61)
[ 6.624053] aw8624_ram_work_routine: enter
[ 6.624118] aw8624_haptic 2-005a: Falling back to syfs fallback for:
aw8624_haptic.bin
[ 6.627246] aw8624_ram_loaded: enter
[ 6.627256] aw8624_ram_loaded: loaded aw8624_haptic.bin - size: 6115
[ 6.627274] aw8624_ram_loaded: check sum pass : 0xdc13
[ 6.627285] aw8624_container_update: enter
[ 6.627681] aw8624_container_update: base_addr=0x 800
[ 6.681099] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 6.681108] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=4999978
[ 6.681114] FCC_MAIN: current vote is now 4999978 voted by FCC_STEPPER_VOTER,1,
previous voted 4899978
[ 6.681121] pm7250b_charger: is_cp_topo_vbatt: true
[ 6.681142] pm7250b_charger: smblib_set_charge_param: fast charge current =
4999978 (0x63)
[ 6.685666] binder: 533:533 ioctl 40046210 7fcf2a4ce4 returned -22
[ 6.752678] F2FS-fs (sda35): Reduce reserved blocks for root = 24264
[ 6.778380] F2FS-fs (sda35): Found nat_bits in checkpoint
[ 6.781118] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 6.781132] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=5099978
[ 6.781138] FCC_MAIN: current vote is now 5099978 voted by FCC_STEPPER_VOTER,1,
previous voted 4999978
[ 6.781146] pm7250b_charger: is_cp_topo_vbatt: true
[ 6.781167] pm7250b_charger: smblib_set_charge_param: fast charge current =
5099978 (0x65)
[ 6.854537] F2FS-fs (sda35): Mounted with checkpoint version = 23c7234c
[ 6.861767] EXT4-fs (sda30): mounted filesystem with ordered data mode. Opts:
barrier=1
[ 6.862645] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 6.870184] EXT4-fs (dm-0): mounted filesystem without journal. Opts:
barrier=1,discard
[ 6.870335] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 6.877849] EXT4-fs (dm-3): mounted filesystem without journal. Opts:
barrier=1,discard
[ 6.881090] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 6.881102] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=5199978
[ 6.881108] FCC_MAIN: current vote is now 5199978 voted by FCC_STEPPER_VOTER,1,
previous voted 5099978
[ 6.881116] pm7250b_charger: is_cp_topo_vbatt: true
[ 6.881137] pm7250b_charger: smblib_set_charge_param: fast charge current =
5199978 (0x67)
[ 6.891907] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 6.899329] EXT4-fs (dm-0): mounted filesystem without journal. Opts:
barrier=1,discard
[ 6.901551] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 6.908928] EXT4-fs (dm-0): mounted filesystem without journal. Opts:
barrier=1,discard
[ 6.909233] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 6.916737] EXT4-fs (dm-1): mounted filesystem without journal. Opts:
barrier=1,discard
[ 6.917201] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 6.921589] EXT4-fs (dm-2): mounted filesystem without journal. Opts:
barrier=1,discard
[ 6.921942] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 6.926791] EXT4-fs (dm-3): mounted filesystem without journal. Opts:
barrier=1,discard
[ 6.931340] EXT4-fs (sda18): mounted filesystem with ordered data mode. Opts:
discard
[ 6.981147] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 6.981162] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=5299978
[ 6.981168] FCC_MAIN: current vote is now 5299978 voted by FCC_STEPPER_VOTER,1,
previous voted 5199978
[ 6.981176] pm7250b_charger: is_cp_topo_vbatt: true
[ 6.981197] pm7250b_charger: smblib_set_charge_param: fast charge current =
5299978 (0x69)
[ 7.081103] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 7.081117] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=5399978
[ 7.081123] FCC_MAIN: current vote is now 5399978 voted by FCC_STEPPER_VOTER,1,
previous voted 5299978
[ 7.081130] pm7250b_charger: is_cp_topo_vbatt: true
[ 7.081151] pm7250b_charger: smblib_set_charge_param: fast charge current =
5399978 (0x6b)
[ 7.136029] [ds28e16] authentic_work: authentic result is 1
[ 7.181066] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 7.181076] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=5499978
[ 7.181082] FCC_MAIN: current vote is now 5499978 voted by FCC_STEPPER_VOTER,1,
previous voted 5399978
[ 7.181090] pm7250b_charger: is_cp_topo_vbatt: true
[ 7.181111] pm7250b_charger: smblib_set_charge_param: fast charge current =
5499978 (0x6d)
[ 7.281112] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 7.281124] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=5599978
[ 7.281130] FCC_MAIN: current vote is now 5599978 voted by FCC_STEPPER_VOTER,1,
previous voted 5499978
[ 7.281137] pm7250b_charger: is_cp_topo_vbatt: true
[ 7.281154] pm7250b_charger: smblib_set_charge_param: fast charge current =
5599978 (0x6f)
[ 7.281353] SELinux: Context u:object_r:vendor_qcc_data_file:s0 is not valid
(left unmapped).
[ 7.285203] SELinux: Context u:object_r:vendor_sys_sxrauxd_data_file:s0 is not
valid (left unmapped).
[ 7.287220] SELinux: Context u:object_r:offlinelog_file:s0 is not valid (left
unmapped).
[ 7.287798] SELinux: Context u:object_r:auto_test_file:s0 is not valid (left
unmapped).
[ 7.291614] SELinux: Context u:object_r:vendor_tombstone_data_file:s0 is not
valid (left unmapped).
[ 7.294465] SELinux: Context u:object_r:displaycount_data_file:s0 is not valid
(left unmapped).
[ 7.294996] SELinux: Context u:object_r:vendor_ramdump_vendor_data_file:s0 is
not valid (left unmapped).
[ 7.299329] SELinux: Context u:object_r:vendor_display_vendor_data_file:s0 is
not valid (left unmapped).
[ 7.299484] SELinux: Context u:object_r:vendor_lm_data_file:s0 is not valid
(left unmapped).
[ 7.301834] SELinux: Context u:object_r:vendor_media_data_file:s0 is not valid
(left unmapped).
[ 7.301992] SELinux: Context u:object_r:vendor_data_tzstorage_file:s0 is not
valid (left unmapped).
[ 7.303847] SELinux: Context u:object_r:vendor_camera_data_file:s0 is not valid
(left unmapped).
[ 7.311235] SELinux: Context u:object_r:vendor_bt_data_file:s0 is not valid
(left unmapped).
[ 7.311389] SELinux: Context u:object_r:vendor_wifi_vendor_data_file:s0 is not
valid (left unmapped).
[ 7.311827] SELinux: Context u:object_r:vendor_wifi_vendor_wpa_socket:s0 is not
valid (left unmapped).
[ 7.313442] SELinux: Context u:object_r:vendor_wigig_hostapd_socket:s0 is not
valid (left unmapped).
[ 7.381135] QCOM-BATT: fcc_stepper_work: get batt temp=289
[ 7.381147] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=5699978
[ 7.381153] FCC_MAIN: current vote is now 5699978 voted by FCC_STEPPER_VOTER,1,
previous voted 5599978
[ 7.381161] pm7250b_charger: is_cp_topo_vbatt: true
[ 7.381178] pm7250b_charger: smblib_set_charge_param: fast charge current =
5699978 (0x71)
[ 7.396157] SELinux: Context u:object_r:vendor_sensing_vendor_data_file:s0 is
not valid (left unmapped).
[ 7.396322] SELinux: Context u:object_r:vendor_cnd_data_file:s0 is not valid
(left unmapped).
[ 7.396832] SELinux: Context u:object_r:vendor_audio_data_file:s0 is not valid
(left unmapped).
[ 7.399140] SELinux: Context u:object_r:vendor_radio_vendor_data_file:s0 is not
valid (left unmapped).
[ 7.400859] SELinux: Context u:object_r:vendor_mbn_data_file:s0 is not valid
(left unmapped).
[ 7.481045] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 7.481059] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=5799978
[ 7.481065] FCC_MAIN: current vote is now 5799978 voted by FCC_STEPPER_VOTER,1,
previous voted 5699978
[ 7.481073] pm7250b_charger: is_cp_topo_vbatt: true
[ 7.481093] pm7250b_charger: smblib_set_charge_param: fast charge current =
5799978 (0x73)
[ 7.488421] SELinux: Context u:object_r:vendor_location_data_file:s0 is not
valid (left unmapped).
[ 7.489077] SELinux: Context u:object_r:vendor_time_data_file:s0 is not valid
(left unmapped).
[ 7.489419] SELinux: Context u:object_r:vendor_mpctl_data_file:s0 is not valid
(left unmapped).
[ 7.489658] SELinux: Context
u:object_r:vendor_secure_element_vendor_data_file:s0 is not valid (left unmapped).
[ 7.489699] SELinux: Context u:object_r:vendor_iop_data_file:s0 is not valid
(left unmapped).
[ 7.490298] SELinux: Context u:object_r:vendor_vpp_data_file:s0 is not valid
(left unmapped).
[ 7.490336] SELinux: Context u:object_r:vendor_tui_data_file:s0 is not valid
(left unmapped).
[ 7.490397] SELinux: Context u:object_r:vendor_nfc_vendor_data_file:s0 is not
valid (left unmapped).
[ 7.490671] SELinux: Context u:object_r:vendor_wifi_vendor_log_data_file:s0 is
not valid (left unmapped).
[ 7.490915] SELinux: Context u:object_r:thermal_data_file:s0 is not valid (left
unmapped).
[ 7.491363] SELinux: Context u:object_r:vendor_charge_log_file:s0 is not valid
(left unmapped).
[ 7.491647] SELinux: Context u:object_r:fingerprint_data_file:s0 is not valid
(left unmapped).
[ 7.492338] SELinux: Context u:object_r:vendor_hal_neuralnetworks_data_file:s0
is not valid (left unmapped).
[ 7.492374] SELinux: Context u:object_r:vendor_qti_data_file:s0 is not valid
(left unmapped).
[ 7.492408] SELinux: Context u:object_r:vendor_qcc_trd_data_file:s0 is not
valid (left unmapped).
[ 7.492771] SELinux: Context u:object_r:vendor_sensors_vendor_data_file:s0 is
not valid (left unmapped).
[ 7.493065] SELinux: Context u:object_r:vendor_ipa_vendor_data_file:s0 is not
valid (left unmapped).
[ 7.493235] SELinux: Context u:object_r:mi_ic_data_file:s0 is not valid (left
unmapped).
[ 7.493447] SELinux: Context u:object_r:minidump_data_file:s0 is not valid
(left unmapped).
[ 7.493824] SELinux: Context u:object_r:vendor_netmgr_data_file:s0 is not valid
(left unmapped).
[ 7.493982] SELinux: Context u:object_r:vendor_netmgr_recovery_data_file:s0 is
not valid (left unmapped).
[ 7.494156] SELinux: Context u:object_r:vendor_port_bridge_data_file:s0 is not
valid (left unmapped).
[ 7.494192] SELinux: Context u:object_r:vendor_qmipriod_data_file:s0 is not
valid (left unmapped).
[ 7.494402] SELinux: Context u:object_r:vendor_shsusr_data_file:s0 is not valid
(left unmapped).
[ 7.494605] SELinux: Context u:object_r:vendor_qspmhal_data_file:s0 is not
valid (left unmapped).
[ 7.494643] SELinux: Context u:object_r:vendor_pddump_data_file:s0 is not valid
(left unmapped).
[ 7.494679] SELinux: Context u:object_r:ta_data_file:s0 is not valid (left
unmapped).
[ 7.494711] SELinux: Context u:object_r:otrp_data_file:s0 is not valid (left
unmapped).
[ 7.494772] SELinux: Context u:object_r:vendor_mediadrm_vendor_data_file:s0 is
not valid (left unmapped).
[ 7.533487] aw8624_container_update: exit
[ 7.533499] aw8624_ram_loaded: fw update complete
[ 7.533503] aw8624_rtp_update: enter
[ 7.533573] aw8624_haptic 2-005a: Falling back to syfs fallback for:
osc_rtp_24K_5s.bin
[ 7.537293] aw8624_rtp_loaded: enter
[ 7.537305] aw8624_rtp_loaded: loaded osc_rtp_24K_5s.bin - size: 120000
[ 7.537323] aw8624_rtp_loaded: rtp size = 120000
[ 7.537363] aw8624_rtp_loaded: rtp update complete
[ 7.581043] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 7.581057] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=5899978
[ 7.581063] FCC_MAIN: current vote is now 5899978 voted by FCC_STEPPER_VOTER,1,
previous voted 5799978
[ 7.581070] pm7250b_charger: is_cp_topo_vbatt: true
[ 7.581087] pm7250b_charger: smblib_set_charge_param: fast charge current =
5899978 (0x75)
[ 7.681053] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 7.681066] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=5999978
[ 7.681071] FCC_MAIN: current vote is now 5999978 voted by FCC_STEPPER_VOTER,1,
previous voted 5899978
[ 7.681079] pm7250b_charger: is_cp_topo_vbatt: true
[ 7.681099] pm7250b_charger: smblib_set_charge_param: fast charge current =
5999978 (0x77)
[ 7.781055] QCOM-BATT: fcc_stepper_work: get batt temp=290
[ 7.781069] FCC_MAIN: FCC_STEPPER_VOTER,1 voting on of val=6000000
[ 7.781075] FCC_MAIN: current vote is now 6000000 voted by FCC_STEPPER_VOTER,1,
previous voted 5999978
[ 7.781083] pm7250b_charger: is_cp_topo_vbatt: true
[ 7.781103] pm7250b_charger: smblib_set_charge_param: fast charge current =
6000000 (0x78)
[ 7.781113] PL_AWAKE: FCC_STEPPER_VOTER,0 voting off of val=0
[ 7.781117] PL_AWAKE: current vote is now 0 voted by FCC_STEPPER_VOTER,0,
previous voted 1
[ 9.806984] init: starting service 'adbd'...
[ 9.807839] init: Created socket '/dev/socket/adbd', mode 660, user 1000, group
1000
[ 9.843908] type=1400 audit(1658736080.228:817): avc: denied { search } for
comm="recovery" name="+4nuVCAAAAwyKN+RhLyhWr8ydLdtqxgLDEm8mB" dev="sda35" ino=8625
scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c239,c256,c512,c768
tclass=dir permissive=1
[ 9.845917] read descriptors
[ 9.845992] read strings
[ 9.846934] init: processing action (sys.usb.config=adb && sys.usb.configfs=1 &&
sys.usb.ffs.ready=1) from (/system/etc/init/hw/init.rc:187)
[ 9.904493] init: Command 'write /config/usb_gadget/g1/UDC $
{sys.usb.controller}' action=sys.usb.config=adb && sys.usb.configfs=1 &&
sys.usb.ffs.ready=1 (/system/etc/init/hw/init.rc:191) took 56ms and succeeded
[ 9.904970] init: processing action (sys.usb.config=adb && sys.usb.configfs=1 &&
sys.usb.ffs.ready=1) from (/init.recovery.usb.rc:53)
[ 9.906465] init: Command 'symlink /config/usb_gadget/g1/functions/ffs.adb
/config/usb_gadget/g1/configs/b.1/f1' action=sys.usb.config=adb &&
sys.usb.configfs=1 && sys.usb.ffs.ready=1 (/init.recovery.usb.rc:57) took 0ms and
failed: symlink() failed: File exists
[ 9.906502] android_work: did not send uevent (0 0 0000000000000000)
[ 9.906851] init: Command 'write /config/usb_gadget/g1/UDC $
{sys.usb.controller}' action=sys.usb.config=adb && sys.usb.configfs=1 &&
sys.usb.ffs.ready=1 (/init.recovery.usb.rc:58) took 0ms and failed: Unable to write
to file '/config/usb_gadget/g1/UDC': Unable to write file contents: Device or
resource busy
[ 9.910479] msm-dwc3 a600000.ssusb: Avail curr from USB = 2
[ 9.941717] type=1400 audit(1658736080.328:818): avc: denied { getattr } for
comm="recovery"
path="/data/data/+4nuVCAAAAwyKN+RhLyhWr8ydLdtqxgLDEm8mB/x6Z7JCAAAAQFcprL,w3J9ig8Ebq
elxHQ/IzgqqCAAAAgGwTYo,,TbDOQepdxnN,bt" dev="sda35" ino=13687
scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c239,c256,c512,c768
tclass=dir permissive=1
[ 9.941889] type=1400 audit(1658736080.328:819): avc: denied { read } for
comm="recovery" name="IzgqqCAAAAgGwTYo,,TbDOQepdxnN,bt" dev="sda35" ino=13687
scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c239,c256,c512,c768
tclass=dir permissive=1
[ 9.942009] type=1400 audit(1658736080.328:820): avc: denied { open } for
comm="recovery"
path="/data/data/+4nuVCAAAAwyKN+RhLyhWr8ydLdtqxgLDEm8mB/x6Z7JCAAAAQFcprL,w3J9ig8Ebq
elxHQ/IzgqqCAAAAgGwTYo,,TbDOQepdxnN,bt" dev="sda35" ino=13687
scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c239,c256,c512,c768
tclass=dir permissive=1
[ 10.004958] msm-dwc3 a600000.ssusb: Avail curr from USB = 100
[ 10.087931] android_work: sent uevent USB_STATE=CONNECTED
[ 10.170449] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 10.170612] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 10.170621] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 10.170630] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 10.170838] pm7250b_charger: smblib_run_aicl: re-running AICL
[ 10.170866] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 10.174490] type=1400 audit(1658736080.560:821): avc: denied { read } for
comm="[email protected]" name="present" dev="sysfs" ino=64266
scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 10.174685] type=1400 audit(1658736080.560:822): avc: denied { open } for
comm="[email protected]"
path="/sys/devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-02/
c440000.qcom,spmi:qcom,pm7250b@2:qcom,qpnp-smb5/power_supply/battery/present"
dev="sysfs" ino=64266 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0
tclass=file permissive=1
[ 10.174802] type=1400 audit(1658736080.560:823): avc: denied { getattr } for
comm="[email protected]"
path="/sys/devices/platform/soc/c440000.qcom,spmi/spmi-0/spmi0-02/
c440000.qcom,spmi:qcom,pm7250b@2:qcom,qpnp-smb5/power_supply/battery/present"
dev="sysfs" ino=64266 scontext=u:r:recovery:s0 tcontext=u:object_r:sysfs:s0
tclass=file permissive=1
[ 10.175719] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 10.177681] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 10.178357] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
irq_status = 0x2
[ 10.179357] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 10.179637] healthd: battery l=72 v=4090 t=29.0 h=2 st=2 c=106 tl=0 ct=USB chg=u
[ 10.179736] healthd: battery l=72 v=4090 t=29.0 h=2 st=2 c=106 tl=0 ct=USB chg=u
[ 10.179813] type=1400 audit(1658736080.564:824): avc: denied { write } for
comm="[email protected]" path="/dev/kmsg" dev="tmpfs" ino=31190
scontext=u:r:recovery:s0 tcontext=u:object_r:kmsg_device:s0 tclass=chr_file
permissive=1
[ 10.181007] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 10.183795] healthd: battery l=72 v=4090 t=29.0 h=2 st=2 c=106 tl=0 ct=USB chg=u
[ 10.187084] healthd: battery l=72 v=4090 t=29.0 h=2 st=2 c=106 tl=0 ct=USB chg=u
[ 10.187175] healthd: battery l=72 v=4090 t=29.0 h=2 st=2 c=106 tl=0 ct=USB chg=u
[ 10.190420] healthd: battery l=72 v=4090 t=29.0 h=2 st=2 c=106 tl=0 ct=USB chg=u
[ 10.315394] configfs-gadget gadget: high-speed config #1: b
[ 10.315505] msm-dwc3 a600000.ssusb: Avail curr from USB = 500
[ 10.315651] android_work: sent uevent USB_STATE=CONFIGURED
[ 10.549308] type=1400 audit(1658736080.936:825): avc: denied { getattr } for
comm="recovery" path="/data/data/eq7ZTBAAAAwJk8kXY0Uju9oBJXxNaRtO" dev="sda35"
ino=5325 scontext=u:r:recovery:s0
tcontext=u:object_r:app_data_file:s0:c241,c256,c512,c768 tclass=dir permissive=1
[ 10.549559] type=1400 audit(1658736080.936:826): avc: denied { read } for
comm="recovery" name="eq7ZTBAAAAwJk8kXY0Uju9oBJXxNaRtO" dev="sda35" ino=5325
scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c241,c256,c512,c768
tclass=dir permissive=1
[ 12.512055] [NVT-ts-spi] nvt_match_fw 1157: start match fw name
[ 12.512060] [NVT-ts-spi] nvt_get_panel_type 1137: match panle type, fw is
[novatek_nt36672c_j17_fw01.bin], mp is [novatek_nt36672c_j17_mp01.bin]
[ 12.512073] [NVT-ts-spi] update_firmware_request 318: filename is
novatek_nt36672c_j17_fw01.bin
[ 12.512087] [NVT-ts-spi] nvt_get_fw_need_write_size 72: fw_need_write_size =
131072(0x20000), NVT end flag
[ 12.512094] [NVT-ts-spi] nvt_bin_header_parser 179: ovly_info = 0, ilm_dlm_num =
2, ovly_sec_num = 0, info_sec_num = 13, partition = 15
[ 12.512114] [NVT-ts-spi] nvt_write_addr 315: nvt_write_addr enter
[ 12.517648] [NVT-ts-spi] nvt_write_addr 315: nvt_write_addr enter
[ 12.597742] [NVT-ts-spi] nvt_write_addr 315: nvt_write_addr enter
[ 12.603191] [NVT-ts-spi] nvt_update_firmware 1091: Update firmware success!
<91074 us>
[ 12.603423] [NVT-ts-spi] nvt_get_fw_info 700: FW type is 0x01, fw_ver=16
[ 12.603722] [NVT-ts-spi] nvt_read_pid 626: PID=5937
[ 12.603943] [NVT-ts-spi] nvt_get_fw_info 700: FW type is 0x01, fw_ver=16
[ 12.604299] [NVT-ts-spi] nvt_read_pid 626: PID=5937
[ 14.977143] type=1400 audit(1658736085.364:1110): avc: denied { getattr } for
comm="recovery" path="/data/data/y4j,QAAAAAg3zPT4QKRtoA8+JQk8YAKlysSRoC5EIfN"
dev="sda35" ino=151350 scontext=u:r:recovery:s0
tcontext=u:object_r:app_data_file:s0:c16,c257,c512,c768 tclass=dir permissive=1
[ 14.977371] type=1400 audit(1658736085.364:1111): avc: denied { read } for
comm="recovery" name="y4j,QAAAAAg3zPT4QKRtoA8+JQk8YAKlysSRoC5EIfN" dev="sda35"
ino=151350 scontext=u:r:recovery:s0
tcontext=u:object_r:app_data_file:s0:c16,c257,c512,c768 tclass=dir permissive=1
[ 14.977553] type=1400 audit(1658736085.364:1112): avc: denied { open } for
comm="recovery" path="/data/data/y4j,QAAAAAg3zPT4QKRtoA8+JQk8YAKlysSRoC5EIfN"
dev="sda35" ino=151350 scontext=u:r:recovery:s0
tcontext=u:object_r:app_data_file:s0:c16,c257,c512,c768 tclass=dir permissive=1
[ 14.977706] type=1400 audit(1658736085.364:1113): avc: denied { search } for
comm="recovery" name="y4j,QAAAAAg3zPT4QKRtoA8+JQk8YAKlysSRoC5EIfN" dev="sda35"
ino=151350 scontext=u:r:recovery:s0
tcontext=u:object_r:app_data_file:s0:c16,c257,c512,c768 tclass=dir permissive=1
[ 14.981828] type=1400 audit(1658736085.368:1114): avc: denied { getattr } for
comm="recovery"
path="/data/data/y4j,QAAAAAg3zPT4QKRtoA8+JQk8YAKlysSRoC5EIfN/Qbi0YAAAAAgQhWu6n4h6LN
qe5,b,PAmv/skJr4DAAAAQd77aFJfCRuA0mG19gNDXjq,wsbD" dev="sda35" ino=627411
scontext=u:r:recovery:s0 tcontext=u:object_r:app_data_file:s0:c16,c257,c512,c768
tclass=file permissive=1
[ 15.167633] type=1400 audit(1658736085.552:1115): avc: denied { getattr } for
comm="recovery" path="/data/data/+2AQZCAAAAQydju1vdCp9zqP0007TpZ,Gxt8yC"
dev="sda35" ino=237445 scontext=u:r:recovery:s0
tcontext=u:object_r:app_data_file:s0:c194,c256,c512,c768 tclass=dir permissive=1
[ 15.167869] type=1400 audit(1658736085.552:1116): avc: denied { read } for
comm="recovery" name="+2AQZCAAAAQydju1vdCp9zqP0007TpZ,Gxt8yC" dev="sda35"
ino=237445 scontext=u:r:recovery:s0
tcontext=u:object_r:app_data_file:s0:c194,c256,c512,c768 tclass=dir permissive=1
[ 15.168014] type=1400 audit(1658736085.552:1117): avc: denied { open } for
comm="recovery" path="/data/data/+2AQZCAAAAQydju1vdCp9zqP0007TpZ,Gxt8yC"
dev="sda35" ino=237445 scontext=u:r:recovery:s0
tcontext=u:object_r:app_data_file:s0:c194,c256,c512,c768 tclass=dir permissive=1
[ 15.168210] type=1400 audit(1658736085.552:1118): avc: denied { search } for
comm="recovery" name="+2AQZCAAAAQydju1vdCp9zqP0007TpZ,Gxt8yC" dev="sda35"
ino=237445 scontext=u:r:recovery:s0
tcontext=u:object_r:app_data_file:s0:c194,c256,c512,c768 tclass=dir permissive=1
[ 15.168863] type=1400 audit(1658736085.556:1119): avc: denied { getattr } for
comm="recovery"
path="/data/data/+2AQZCAAAAQydju1vdCp9zqP0007TpZ,Gxt8yC/fdZHRAAAAAQT2J1SpFoyLyG8xHd
MVI1R/plmOzAAAAAwDn7cSIM,PpsrLIFsaa6OX/JAZUHAAAAAAPfdvFrQakoUbgQh6i59O,"
dev="sda35" ino=310525 scontext=u:r:recovery:s0
tcontext=u:object_r:app_data_file:s0:c194,c256,c512,c768 tclass=file permissive=1
[ 15.687510] SELinux: Context u:object_r:mcd_data_file:s0 is not valid (left
unmapped).
[ 15.687692] SELinux: Context u:object_r:whetstone_data_file:s0 is not valid
(left unmapped).
[ 15.687733] SELinux: Context u:object_r:migt_file:s0 is not valid (left
unmapped).
[ 15.687896] SELinux: Context u:object_r:miui_native_file:s0 is not valid (left
unmapped).
[ 15.687935] SELinux: Context u:object_r:theme_data_file:s0 is not valid (left
unmapped).
[ 15.688574] SELinux: Context u:object_r:theme_data_file:s0:c512,c768 is not
valid (left unmapped).
[ 15.721713] SELinux: Context u:object_r:offlinedb_data_file:s0 is not valid
(left unmapped).
[ 15.775622] SELinux: Context u:object_r:migard_data_file:s0 is not valid (left
unmapped).
[ 16.146591] SELinux: Context u:object_r:magisk_file:s0 is not valid (left
unmapped).
[ 16.147702] SELinux: Context u:object_r:mqsas_data_file:s0 is not valid (left
unmapped).
[ 16.153289] SELinux: Context u:object_r:extm_data_file:s0 is not valid (left
unmapped).
[ 16.153347] SELinux: Context u:object_r:vendor_dpmd_data_file:s0 is not valid
(left unmapped).
[ 16.163066] SELinux: Context u:object_r:data_log_file:s0 is not valid (left
unmapped).
[ 16.163221] SELinux: Context u:object_r:data_log_stability_file:s0 is not valid
(left unmapped).
[ 16.163266] SELinux: Context u:object_r:data_log_misight_file:s0 is not valid
(left unmapped).
[ 16.169648] EXT4-fs (sda23): mounted filesystem with ordered data mode. Opts:
barrier=1
[ 16.175011] EXT4-fs (sda32): mounted filesystem with ordered data mode. Opts:
discard
[ 16.962021] init: Untracked pid 615 exited with status 0
[ 16.963587] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 16.973677] EXT4-fs (dm-0): mounted filesystem without journal. Opts:
barrier=1,discard
[ 16.974539] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 16.984371] EXT4-fs (dm-1): mounted filesystem without journal. Opts:
barrier=1,discard
[ 16.985803] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 16.995127] EXT4-fs (dm-2): mounted filesystem without journal. Opts:
barrier=1,discard
[ 16.995868] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 17.005011] EXT4-fs (dm-3): mounted filesystem without journal. Opts:
barrier=1,discard
[ 17.013711] EXT4-fs (sda18): mounted filesystem with ordered data mode. Opts:
discard
[ 18.332655] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 18.332823] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 18.332832] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 18.332841] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 18.333050] pm7250b_charger: smblib_run_aicl: re-running AICL
[ 18.333078] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 18.335207] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 291 FCC = 6000000uA FV =
4470000uV
[ 18.335215] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 291 max voltage= 4470000uv
FV = 4470000uV
[ 18.336077] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 18.340404] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
irq_status = 0x2
[ 18.340680] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 18.340733] healthd: battery l=72 v=4093 t=29.0 h=2 st=2 c=-7 tl=0 ct=USB chg=u
[ 18.340825] healthd: battery l=72 v=4093 t=29.0 h=2 st=2 c=-7 tl=0 ct=USB chg=u
[ 18.343234] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 18.345185] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 18.346877] healthd: battery l=72 v=4093 t=29.0 h=2 st=2 c=-7 tl=0 ct=USB chg=u
[ 18.350087] healthd: battery l=72 v=4093 t=29.1 h=2 st=2 c=-7 tl=0 ct=USB chg=u
[ 18.350174] healthd: battery l=72 v=4093 t=29.1 h=2 st=2 c=-7 tl=0 ct=USB chg=u
[ 18.353346] healthd: battery l=72 v=4093 t=29.1 h=2 st=2 c=-7 tl=0 ct=USB chg=u
[ 19.366757] EXT4-fs (sda23): mounted filesystem with ordered data mode. Opts:
barrier=1
[ 19.374115] EXT4-fs (sda32): mounted filesystem with ordered data mode. Opts:
discard
[ 20.166540] init: Untracked pid 630 exited with status 0
[ 20.167459] type=1400 audit(1658736090.552:2215): avc: denied { create } for
comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0
tclass=netlink_kobject_uevent_socket permissive=1
[ 20.167628] type=1400 audit(1658736090.552:2216): avc: denied { bind } for
comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0
tclass=netlink_kobject_uevent_socket permissive=1
[ 20.167743] type=1400 audit(1658736090.552:2217): avc: denied { setattr } for
comm="recovery" name="postrecoveryboot.sh" dev="rootfs" ino=13738
scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=file permissive=1
[ 20.221452] type=1400 audit(1658736090.608:2218): avc: denied { sys_rawio } for
comm="blockdev" capability=17 scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0
tclass=capability permissive=1
[ 21.113241] type=1400 audit(1658736091.500:2219): avc: denied { module_request }
for comm="recovery" kmod="fs-auto" scontext=u:r:recovery:s0 tcontext=u:r:kernel:s0
tclass=system permissive=1
[ 21.113618] [drm:dsi_panel_set_backlight] [msm-dsi-info]: backlight type:1
lvl:1200
[ 21.113640] type=1400 audit(1658736091.500:2220): avc: denied { write } for
comm="recovery" name="brightness" dev="sysfs" ino=58048 scontext=u:r:recovery:s0
tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[ 21.116884] type=1400 audit(1658736091.504:2221): avc: denied { search } for
comm="recovery" name="/" dev="configfs" ino=17261 scontext=u:r:recovery:s0
tcontext=u:object_r:configfs:s0 tclass=dir permissive=1
[ 21.117010] type=1400 audit(1658736091.504:2222): avc: denied { write } for
comm="recovery" name="g1" dev="configfs" ino=27500 scontext=u:r:recovery:s0
tcontext=u:object_r:configfs:s0 tclass=dir permissive=1
[ 21.117167] type=1400 audit(1658736091.504:2223): avc: denied { add_name } for
comm="recovery" name="idVendor" scontext=u:r:recovery:s0
tcontext=u:object_r:configfs:s0 tclass=dir permissive=1
[ 21.117185] init: processing action (sys.usb.config=none && sys.usb.configfs=1)
from (/system/etc/init/hw/init.rc:172)
[ 21.117283] type=1400 audit(1658736091.504:2224): avc: denied { create } for
comm="recovery" name="idVendor" scontext=u:r:recovery:s0
tcontext=u:object_r:configfs:s0 tclass=file permissive=1
[ 21.118337] init: Sending signal 9 to service 'adbd' (pid 600) process group...
[ 21.123809] libprocessgroup: Successfully killed process cgroup uid 0 pid 600 in
5ms
[ 21.125409] [drm:dsi_panel_set_backlight] [msm-dsi-info]: backlight type:1
lvl:1200
[ 21.134989] ufshcd-qcom 1d84000.ufshc: ufshcd_ioctl: User buffer is NULL!
[ 21.144371] EXT4-fs (dm-0): mounted filesystem without journal. Opts:
barrier=1,discard
[ 21.155263] init: Service 'adbd' (pid 600) received signal 9
[ 21.157198] init: processing action (sys.usb.config=*) from
(/init.recovery.usb.rc:38)
[ 21.157263] init: Command 'rm /config/usb_gadget/g1/configs/b.1/f1'
action=sys.usb.config=* (/init.recovery.usb.rc:39) took 0ms and failed: unlink()
failed: No such file or directory
[ 21.157312] init: Command 'rm /config/usb_gadget/g1/configs/b.1/f2'
action=sys.usb.config=* (/init.recovery.usb.rc:40) took 0ms and failed: unlink()
failed: No such file or directory
[ 21.157340] init: processing action (sys.usb.config=none && sys.usb.configfs=1)
from (/init.recovery.usb.rc:42)
[ 21.189295] read descriptors
[ 21.189373] read strings
[ 21.191505] configfs-gadget a600000.dwc3: failed to start g1: -19
[ 21.920770] read descriptors
[ 21.920860] read strings
[ 22.204389] read descriptors
[ 22.204470] read strings
[ 22.204910] init: processing action (sys.usb.config=mtp,adb &&
sys.usb.configfs=1 && sys.usb.ffs.ready=1) from (/init.recovery.usb.rc:64)
[ 22.206063] init: Command 'symlink /config/usb_gadget/g1/functions/ffs.mtp
/config/usb_gadget/g1/configs/b.1/f1' action=sys.usb.config=mtp,adb &&
sys.usb.configfs=1 && sys.usb.ffs.ready=1 (/init.recovery.usb.rc:68) took 0ms and
failed: symlink() failed: File exists
[ 22.206267] init: Command 'symlink /config/usb_gadget/g1/functions/ffs.adb
/config/usb_gadget/g1/configs/b.1/f2' action=sys.usb.config=mtp,adb &&
sys.usb.configfs=1 && sys.usb.ffs.ready=1 (/init.recovery.usb.rc:69) took 0ms and
failed: symlink() failed: File exists
[ 22.260445] init: Command 'write /config/usb_gadget/g1/UDC $
{sys.usb.controller}' action=sys.usb.config=mtp,adb && sys.usb.configfs=1 &&
sys.usb.ffs.ready=1 (/init.recovery.usb.rc:70) took 54ms and succeeded
[ 22.262437] android_work: sent uevent USB_STATE=DISCONNECTED
[ 22.266504] msm-dwc3 a600000.ssusb: Avail curr from USB = 2
[ 22.360916] msm-dwc3 a600000.ssusb: Avail curr from USB = 100
[ 22.360951] android_work: did not send uevent (0 0 0000000000000000)
[ 22.444090] android_work: sent uevent USB_STATE=CONNECTED
[ 22.541959] configfs-gadget gadget: high-speed config #1: b
[ 22.542129] msm-dwc3 a600000.ssusb: Avail curr from USB = 500
[ 22.542218] android_work: sent uevent USB_STATE=CONFIGURED
[ 22.800123] binder: 533:533 ioctl 40046210 7fcf2a5444 returned -22
[ 22.801036] aw8624_haptics_upload_effect: enter
[ 22.801038] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 22.801042] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 22.801044] aw8624_haptics_upload_effect line=2834
[ 22.801045] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 22.801049] aw8624_haptics_playback: 2914 enter
[ 22.801050] aw8624_haptics_playback: effect_id=0 , val = 1
[ 22.801051] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 22.801053] aw8624_haptics_playback enter cont_mode
[ 22.801074] aw8624_vibrator_work_routine: enter
[ 22.801077] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 22.801083] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 22.801489] aw8624_haptic_stop: enter
[ 22.801494] aw8624_haptic_play_go: enter
[ 22.802521] aw8624_haptic_ram_vbat_comp: enter
[ 22.802525] aw8624_vibrator_work_routine line=2284
[ 22.802527] aw8624_haptic_play_effect_seq: enter
[ 22.802529] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 22.802532] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 22.802533] aw8624_haptic_play_effect_seq line=1178
[ 22.803051] aw8624_haptic_play_effect_seq line=1200
[ 22.803053] aw8624_haptic_effect_strength: enter
[ 22.803055] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 22.803057] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 22.803065] aw8624_haptic_stop: enter
[ 22.803066] aw8624_haptic_play_go: enter
[ 22.811616] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 22.811619] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 22.811770] aw8624_haptic_play_repeat_seq: enter
[ 22.812218] aw8624_haptic_active: enter
[ 22.812589] aw8624_interrupt_clear: enter
[ 22.812813] aw8624_interrupt_clear: reg SYSINT=0x20
[ 22.813182] aw8624_haptic_start: enter
[ 22.813184] aw8624_haptic_active: enter
[ 22.813551] aw8624_interrupt_clear: enter
[ 22.813775] aw8624_interrupt_clear: reg SYSINT=0x0
[ 22.814142] aw8624_haptic_play_go: enter
[ 22.814515] aw8624_haptic_play_effect_seq line=1204
[ 22.814517] aw8624_haptic_play_effect_seq: exit
[ 22.814520] aw8624_vibrator_work_routine line=2286
[ 22.814525] aw8624_vibrator_work_routine: exit
[ 22.854531] aw8624_vibrator_timer_func: enter
[ 22.854662] aw8624_vibrator_work_routine: enter
[ 22.854666] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 22.854672] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 22.854833] aw8624_haptic_stop: enter
[ 22.854835] aw8624_haptic_play_go: enter
[ 22.855439] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.855665] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.855891] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.856248] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.856478] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.856705] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.856931] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.857157] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.857383] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.857619] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.857858] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.858084] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.858312] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.858537] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.858764] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.858989] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.859221] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.859447] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.859672] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 22.860540] aw8624_vibrator_work_routine: exit
[ 24.190579] aw8624_haptics_playback: 2914 enter
[ 24.190581] aw8624_haptics_playback: effect_id=0 , val = 0
[ 24.190582] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 24.190587] aw8624_haptics_playback enter cont_mode
[ 24.190596] aw8624_haptics_erase: enter
[ 24.190599] aw8624_haptics_upload_effect: enter
[ 24.190600] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 24.190602] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 24.190603] aw8624_haptics_upload_effect line=2834
[ 24.190604] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 24.190606] aw8624_vibrator_work_routine: enter
[ 24.190607] aw8624_haptics_playback: 2914 enter
[ 24.190608] aw8624_haptics_playback: effect_id=0 , val = 1
[ 24.190609] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 24.190612] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 24.190614] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 24.190615] aw8624_haptics_playback enter cont_mode
[ 24.190932] aw8624_haptic_stop: enter
[ 24.190934] aw8624_haptic_play_go: enter
[ 24.191902] aw8624_haptic_ram_vbat_comp: enter
[ 24.191904] aw8624_vibrator_work_routine line=2284
[ 24.191907] aw8624_haptic_play_effect_seq: enter
[ 24.191909] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 24.191911] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 24.191913] aw8624_haptic_play_effect_seq line=1178
[ 24.192437] aw8624_haptic_play_effect_seq line=1200
[ 24.192440] aw8624_haptic_effect_strength: enter
[ 24.192442] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 24.192444] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 24.192449] aw8624_haptic_stop: enter
[ 24.192450] aw8624_haptic_play_go: enter
[ 24.200441] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 24.200443] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 24.200594] aw8624_haptic_play_repeat_seq: enter
[ 24.200972] aw8624_haptic_active: enter
[ 24.201344] aw8624_interrupt_clear: enter
[ 24.201570] aw8624_interrupt_clear: reg SYSINT=0x21
[ 24.201940] aw8624_haptic_start: enter
[ 24.201942] aw8624_haptic_active: enter
[ 24.202330] aw8624_interrupt_clear: enter
[ 24.202555] aw8624_interrupt_clear: reg SYSINT=0x0
[ 24.202927] aw8624_haptic_play_go: enter
[ 24.203302] aw8624_haptic_play_effect_seq line=1204
[ 24.203305] aw8624_haptic_play_effect_seq: exit
[ 24.203307] aw8624_vibrator_work_routine line=2286
[ 24.203312] aw8624_vibrator_work_routine: exit
[ 24.203316] aw8624_vibrator_work_routine: enter
[ 24.203318] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 24.203323] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 24.203472] aw8624_haptic_stop: enter
[ 24.203474] aw8624_haptic_play_go: enter
[ 24.204073] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 24.204302] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 24.204903] aw8624_haptic_ram_vbat_comp: enter
[ 24.204905] aw8624_vibrator_work_routine line=2284
[ 24.204907] aw8624_haptic_play_effect_seq: enter
[ 24.204909] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 24.204911] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 24.204912] aw8624_haptic_play_effect_seq line=1178
[ 24.205429] aw8624_haptic_play_effect_seq line=1200
[ 24.205431] aw8624_haptic_effect_strength: enter
[ 24.205433] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 24.205435] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 24.205440] aw8624_haptic_stop: enter
[ 24.205441] aw8624_haptic_play_go: enter
[ 24.213401] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 24.213403] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 24.213551] aw8624_haptic_play_repeat_seq: enter
[ 24.213926] aw8624_haptic_active: enter
[ 24.214296] aw8624_interrupt_clear: enter
[ 24.214521] aw8624_interrupt_clear: reg SYSINT=0x21
[ 24.214896] aw8624_haptic_start: enter
[ 24.214898] aw8624_haptic_active: enter
[ 24.215269] aw8624_interrupt_clear: enter
[ 24.215494] aw8624_interrupt_clear: reg SYSINT=0x0
[ 24.215863] aw8624_haptic_play_go: enter
[ 24.216244] aw8624_haptic_play_effect_seq line=1204
[ 24.216246] aw8624_haptic_play_effect_seq: exit
[ 24.216248] aw8624_vibrator_work_routine line=2286
[ 24.216250] aw8624_vibrator_work_routine: exit
[ 24.256259] aw8624_vibrator_timer_func: enter
[ 24.256309] aw8624_vibrator_work_routine: enter
[ 24.256317] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 24.256324] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 24.256486] aw8624_haptic_stop: enter
[ 24.256488] aw8624_haptic_play_go: enter
[ 24.257104] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.257346] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.257587] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.257827] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.258068] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.258298] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.258523] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.258749] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.258974] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.259199] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.259423] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.259648] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.259873] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.260103] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.260348] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.260577] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.260802] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.261028] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.261252] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.261477] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 24.262069] aw8624_vibrator_work_routine: exit
[ 26.501497] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 26.501663] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 26.501673] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 26.501682] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 26.501891] pm7250b_charger: smblib_run_aicl: re-running AICL
[ 26.501916] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 26.504891] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 290 FCC = 6000000uA FV =
4470000uV
[ 26.504900] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 290 max voltage= 4470000uv
FV = 4470000uV
[ 26.505743] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 26.509067] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 26.509350] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
irq_status = 0x2
[ 26.510945] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 26.512689] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 26.512814] healthd: battery l=72 v=4120 t=29.1 h=2 st=2 c=-309 tl=0 ct=USB
chg=u
[ 26.512909] healthd: battery l=72 v=4120 t=29.1 h=2 st=2 c=-309 tl=0 ct=USB
chg=u
[ 26.512935] type=1400 audit(1658736096.900:2247): avc: denied { write } for
comm="[email protected]" path="/dev/kmsg" dev="tmpfs" ino=31190
scontext=u:r:recovery:s0 tcontext=u:object_r:kmsg_device:s0 tclass=chr_file
permissive=1
[ 26.516057] healthd: battery l=72 v=4120 t=29.1 h=2 st=2 c=-309 tl=0 ct=USB
chg=u
[ 26.519189] healthd: battery l=72 v=4120 t=29.1 h=2 st=2 c=-309 tl=0 ct=USB
chg=u
[ 26.519273] healthd: battery l=72 v=4120 t=29.1 h=2 st=2 c=-309 tl=0 ct=USB
chg=u
[ 26.522426] healthd: battery l=72 v=4120 t=29.1 h=2 st=2 c=-309 tl=0 ct=USB
chg=u
[ 27.274088] aw8624_haptics_playback: 2914 enter
[ 27.274092] aw8624_haptics_playback: effect_id=0 , val = 0
[ 27.274094] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 27.274102] aw8624_haptics_playback enter cont_mode
[ 27.274118] aw8624_haptics_erase: enter
[ 27.274124] aw8624_haptics_upload_effect: enter
[ 27.274128] aw8624_vibrator_work_routine: enter
[ 27.274131] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 27.274133] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration = 0
[ 27.274136] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 27.274450] aw8624_haptic_stop: enter
[ 27.274452] aw8624_haptic_play_go: enter
[ 27.275424] aw8624_vibrator_work_routine: exit
[ 27.275446] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 27.275449] aw8624_haptics_upload_effect line=2834
[ 27.275452] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 27.275460] aw8624_haptics_playback: 2914 enter
[ 27.275462] aw8624_haptics_playback: effect_id=0 , val = 1
[ 27.275464] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 27.275469] aw8624_haptics_playback enter cont_mode
[ 27.275489] aw8624_vibrator_work_routine: enter
[ 27.275492] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 27.275498] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 27.275646] aw8624_haptic_stop: enter
[ 27.275648] aw8624_haptic_play_go: enter
[ 27.277365] aw8624_haptic_ram_vbat_comp: enter
[ 27.277373] aw8624_vibrator_work_routine line=2284
[ 27.277375] aw8624_haptic_play_effect_seq: enter
[ 27.277377] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 27.277379] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 27.277381] aw8624_haptic_play_effect_seq line=1178
[ 27.277903] aw8624_haptic_play_effect_seq line=1200
[ 27.277905] aw8624_haptic_effect_strength: enter
[ 27.277907] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 27.277909] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 27.277919] aw8624_haptic_stop: enter
[ 27.277920] aw8624_haptic_play_go: enter
[ 27.286188] aw8624_haptic_set_gain: ref 4400 vbat 4122
[ 27.286191] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 27.286342] aw8624_haptic_play_repeat_seq: enter
[ 27.286720] aw8624_haptic_active: enter
[ 27.287090] aw8624_interrupt_clear: enter
[ 27.287316] aw8624_interrupt_clear: reg SYSINT=0x21
[ 27.287686] aw8624_haptic_start: enter
[ 27.287688] aw8624_haptic_active: enter
[ 27.288255] aw8624_interrupt_clear: enter
[ 27.288483] aw8624_interrupt_clear: reg SYSINT=0x0
[ 27.288853] aw8624_haptic_play_go: enter
[ 27.289228] aw8624_haptic_play_effect_seq line=1204
[ 27.289230] aw8624_haptic_play_effect_seq: exit
[ 27.289233] aw8624_vibrator_work_routine line=2286
[ 27.289238] aw8624_vibrator_work_routine: exit
[ 27.329244] aw8624_vibrator_timer_func: enter
[ 27.329388] aw8624_vibrator_work_routine: enter
[ 27.329391] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 27.329397] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 27.329560] aw8624_haptic_stop: enter
[ 27.329562] aw8624_haptic_play_go: enter
[ 27.330164] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.330391] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.330616] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.330841] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.331066] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.331302] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.331545] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.331771] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.331998] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.332456] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.332684] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.332910] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.333137] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.333362] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.333589] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.333814] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.334039] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.334266] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 27.334862] aw8624_vibrator_work_routine: exit
[ 27.391525] type=1400 audit(1658736097.776:2248): avc: denied { getattr } for
comm="recovery" path="/linkerconfig" dev="tmpfs" ino=27260 scontext=u:r:recovery:s0
tcontext=u:object_r:linkerconfig_file:s0 tclass=dir permissive=1
[ 27.391735] type=1400 audit(1658736097.776:2249): avc: denied { getattr } for
comm="recovery" path="/system/bin/init" dev="rootfs" ino=13674
scontext=u:r:recovery:s0 tcontext=u:object_r:init_exec:s0 tclass=file permissive=1
[ 27.391942] type=1400 audit(1658736097.776:2250): avc: denied { search } for
comm="recovery" name="0" dev="sda35" ino=978 scontext=u:r:recovery:s0
tcontext=u:object_r:system_data_file:s0:c512,c768 tclass=dir permissive=1
[ 29.391929] aw8624_haptics_playback: 2914 enter
[ 29.391931] aw8624_haptics_playback: effect_id=0 , val = 0
[ 29.391932] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 29.391938] aw8624_haptics_playback enter cont_mode
[ 29.391947] aw8624_haptics_erase: enter
[ 29.391950] aw8624_haptics_upload_effect: enter
[ 29.391951] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 29.391953] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 29.391954] aw8624_haptics_upload_effect line=2834
[ 29.391955] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 29.391958] aw8624_vibrator_work_routine: enter
[ 29.391959] aw8624_haptics_playback: 2914 enter
[ 29.391960] aw8624_haptics_playback: effect_id=0 , val = 1
[ 29.391961] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 29.391963] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 29.391966] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 29.391967] aw8624_haptics_playback enter cont_mode
[ 29.392810] aw8624_haptic_stop: enter
[ 29.392817] aw8624_haptic_play_go: enter
[ 29.393835] aw8624_haptic_ram_vbat_comp: enter
[ 29.393840] aw8624_vibrator_work_routine line=2284
[ 29.393842] aw8624_haptic_play_effect_seq: enter
[ 29.393844] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 29.393847] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 29.393849] aw8624_haptic_play_effect_seq line=1178
[ 29.394365] aw8624_haptic_play_effect_seq line=1200
[ 29.394368] aw8624_haptic_effect_strength: enter
[ 29.394370] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 29.394372] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 29.394379] aw8624_haptic_stop: enter
[ 29.394381] aw8624_haptic_play_go: enter
[ 29.402784] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 29.402788] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 29.402947] aw8624_haptic_play_repeat_seq: enter
[ 29.403334] aw8624_haptic_active: enter
[ 29.403707] aw8624_interrupt_clear: enter
[ 29.403945] aw8624_interrupt_clear: reg SYSINT=0x21
[ 29.404558] aw8624_haptic_start: enter
[ 29.404561] aw8624_haptic_active: enter
[ 29.404932] aw8624_interrupt_clear: enter
[ 29.405158] aw8624_interrupt_clear: reg SYSINT=0x0
[ 29.405529] aw8624_haptic_play_go: enter
[ 29.405904] aw8624_haptic_play_effect_seq line=1204
[ 29.405907] aw8624_haptic_play_effect_seq: exit
[ 29.405910] aw8624_vibrator_work_routine line=2286
[ 29.405914] aw8624_vibrator_work_routine: exit
[ 29.405918] aw8624_vibrator_work_routine: enter
[ 29.405921] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 29.405927] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 29.406076] aw8624_haptic_stop: enter
[ 29.406077] aw8624_haptic_play_go: enter
[ 29.406675] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 29.407268] aw8624_haptic_ram_vbat_comp: enter
[ 29.407271] aw8624_vibrator_work_routine line=2284
[ 29.407273] aw8624_haptic_play_effect_seq: enter
[ 29.407275] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 29.407277] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 29.407279] aw8624_haptic_play_effect_seq line=1178
[ 29.407811] aw8624_haptic_play_effect_seq line=1200
[ 29.407813] aw8624_haptic_effect_strength: enter
[ 29.407815] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 29.407816] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 29.407833] aw8624_haptic_stop: enter
[ 29.407834] aw8624_haptic_play_go: enter
[ 29.416351] aw8624_haptic_set_gain: ref 4400 vbat 4122
[ 29.416353] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 29.416502] aw8624_haptic_play_repeat_seq: enter
[ 29.416877] aw8624_haptic_active: enter
[ 29.417248] aw8624_interrupt_clear: enter
[ 29.417473] aw8624_interrupt_clear: reg SYSINT=0x21
[ 29.417844] aw8624_haptic_start: enter
[ 29.417846] aw8624_haptic_active: enter
[ 29.418216] aw8624_interrupt_clear: enter
[ 29.418442] aw8624_interrupt_clear: reg SYSINT=0x0
[ 29.418812] aw8624_haptic_play_go: enter
[ 29.419187] aw8624_haptic_play_effect_seq line=1204
[ 29.419189] aw8624_haptic_play_effect_seq: exit
[ 29.419191] aw8624_vibrator_work_routine line=2286
[ 29.419194] aw8624_vibrator_work_routine: exit
[ 29.459199] aw8624_vibrator_timer_func: enter
[ 29.459283] aw8624_vibrator_work_routine: enter
[ 29.459286] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 29.459292] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 29.459446] aw8624_haptic_stop: enter
[ 29.459448] aw8624_haptic_play_go: enter
[ 29.460182] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.460411] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.460638] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.460863] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.461089] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.461314] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.461540] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.461781] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.462021] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.462247] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.462472] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.462698] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.462923] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.463149] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.463374] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.463599] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.463824] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.464389] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 29.464988] aw8624_vibrator_work_routine: exit
[ 30.628469] aw8624_haptics_playback: 2914 enter
[ 30.628471] aw8624_haptics_playback: effect_id=0 , val = 0
[ 30.628472] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 30.628477] aw8624_haptics_playback enter cont_mode
[ 30.628487] aw8624_haptics_erase: enter
[ 30.628489] aw8624_haptics_upload_effect: enter
[ 30.628490] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 30.628492] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 30.628493] aw8624_haptics_upload_effect line=2834
[ 30.628494] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 30.628497] aw8624_vibrator_work_routine: enter
[ 30.628498] aw8624_haptics_playback: 2914 enter
[ 30.628499] aw8624_haptics_playback: effect_id=0 , val = 1
[ 30.628500] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 30.628502] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 30.628504] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 30.628506] aw8624_haptics_playback enter cont_mode
[ 30.628824] aw8624_haptic_stop: enter
[ 30.628826] aw8624_haptic_play_go: enter
[ 30.629796] aw8624_haptic_ram_vbat_comp: enter
[ 30.629798] aw8624_vibrator_work_routine line=2284
[ 30.629801] aw8624_haptic_play_effect_seq: enter
[ 30.629802] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 30.629805] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 30.629806] aw8624_haptic_play_effect_seq line=1178
[ 30.630324] aw8624_haptic_play_effect_seq line=1200
[ 30.630326] aw8624_haptic_effect_strength: enter
[ 30.630329] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 30.630330] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 30.630335] aw8624_haptic_stop: enter
[ 30.630336] aw8624_haptic_play_go: enter
[ 30.638296] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 30.638298] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 30.638449] aw8624_haptic_play_repeat_seq: enter
[ 30.638826] aw8624_haptic_active: enter
[ 30.639198] aw8624_interrupt_clear: enter
[ 30.639425] aw8624_interrupt_clear: reg SYSINT=0x21
[ 30.639797] aw8624_haptic_start: enter
[ 30.639798] aw8624_haptic_active: enter
[ 30.640213] aw8624_interrupt_clear: enter
[ 30.640442] aw8624_interrupt_clear: reg SYSINT=0x0
[ 30.640815] aw8624_haptic_play_go: enter
[ 30.641193] aw8624_haptic_play_effect_seq line=1204
[ 30.641195] aw8624_haptic_play_effect_seq: exit
[ 30.641197] aw8624_vibrator_work_routine line=2286
[ 30.641202] aw8624_vibrator_work_routine: exit
[ 30.641205] aw8624_vibrator_work_routine: enter
[ 30.641207] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 30.641213] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 30.641362] aw8624_haptic_stop: enter
[ 30.641363] aw8624_haptic_play_go: enter
[ 30.641962] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 30.642188] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 30.642784] aw8624_haptic_ram_vbat_comp: enter
[ 30.642786] aw8624_vibrator_work_routine line=2284
[ 30.642788] aw8624_haptic_play_effect_seq: enter
[ 30.642790] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 30.642792] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 30.642794] aw8624_haptic_play_effect_seq line=1178
[ 30.643312] aw8624_haptic_play_effect_seq line=1200
[ 30.643313] aw8624_haptic_effect_strength: enter
[ 30.643315] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 30.643317] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 30.643322] aw8624_haptic_stop: enter
[ 30.643323] aw8624_haptic_play_go: enter
[ 30.651296] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 30.651298] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 30.651446] aw8624_haptic_play_repeat_seq: enter
[ 30.651821] aw8624_haptic_active: enter
[ 30.652199] aw8624_interrupt_clear: enter
[ 30.652425] aw8624_interrupt_clear: reg SYSINT=0x21
[ 30.652801] aw8624_haptic_start: enter
[ 30.652803] aw8624_haptic_active: enter
[ 30.653174] aw8624_interrupt_clear: enter
[ 30.653399] aw8624_interrupt_clear: reg SYSINT=0x0
[ 30.653769] aw8624_haptic_play_go: enter
[ 30.654144] aw8624_haptic_play_effect_seq line=1204
[ 30.654146] aw8624_haptic_play_effect_seq: exit
[ 30.654148] aw8624_vibrator_work_routine line=2286
[ 30.654150] aw8624_vibrator_work_routine: exit
[ 30.694159] aw8624_vibrator_timer_func: enter
[ 30.694210] aw8624_vibrator_work_routine: enter
[ 30.694215] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 30.694220] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 30.694384] aw8624_haptic_stop: enter
[ 30.694385] aw8624_haptic_play_go: enter
[ 30.694988] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.695216] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.695442] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.695668] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.695894] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.696151] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.696381] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.696608] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.696834] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.697060] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.697285] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.697511] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.697737] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.697963] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.698188] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.698416] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.698644] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.698871] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.699097] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.699322] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 30.699918] aw8624_vibrator_work_routine: exit
[ 31.329917] aw8624_haptics_playback: 2914 enter
[ 31.329919] aw8624_haptics_playback: effect_id=0 , val = 0
[ 31.329920] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 31.329925] aw8624_haptics_playback enter cont_mode
[ 31.329934] aw8624_haptics_erase: enter
[ 31.329936] aw8624_haptics_upload_effect: enter
[ 31.329937] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 31.329940] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 31.329940] aw8624_haptics_upload_effect line=2834
[ 31.329941] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 31.329944] aw8624_vibrator_work_routine: enter
[ 31.329945] aw8624_haptics_playback: 2914 enter
[ 31.329946] aw8624_haptics_playback: effect_id=0 , val = 1
[ 31.329947] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 31.329949] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 31.329952] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 31.329954] aw8624_haptics_playback enter cont_mode
[ 31.330275] aw8624_haptic_stop: enter
[ 31.330279] aw8624_haptic_play_go: enter
[ 31.331313] aw8624_haptic_ram_vbat_comp: enter
[ 31.331319] aw8624_vibrator_work_routine line=2284
[ 31.331322] aw8624_haptic_play_effect_seq: enter
[ 31.331324] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 31.331326] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 31.331328] aw8624_haptic_play_effect_seq line=1178
[ 31.331853] aw8624_haptic_play_effect_seq line=1200
[ 31.331856] aw8624_haptic_effect_strength: enter
[ 31.331858] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 31.331860] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 31.331868] aw8624_haptic_stop: enter
[ 31.331869] aw8624_haptic_play_go: enter
[ 31.339870] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 31.339874] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 31.340074] aw8624_haptic_play_repeat_seq: enter
[ 31.340461] aw8624_haptic_active: enter
[ 31.340832] aw8624_interrupt_clear: enter
[ 31.341097] aw8624_interrupt_clear: reg SYSINT=0x21
[ 31.341482] aw8624_haptic_start: enter
[ 31.341484] aw8624_haptic_active: enter
[ 31.341855] aw8624_interrupt_clear: enter
[ 31.342080] aw8624_interrupt_clear: reg SYSINT=0x0
[ 31.342450] aw8624_haptic_play_go: enter
[ 31.342826] aw8624_haptic_play_effect_seq line=1204
[ 31.342828] aw8624_haptic_play_effect_seq: exit
[ 31.342830] aw8624_vibrator_work_routine line=2286
[ 31.342835] aw8624_vibrator_work_routine: exit
[ 31.342840] aw8624_vibrator_work_routine: enter
[ 31.342842] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 31.342847] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 31.342998] aw8624_haptic_stop: enter
[ 31.342999] aw8624_haptic_play_go: enter
[ 31.343600] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 31.343828] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 31.344435] aw8624_haptic_ram_vbat_comp: enter
[ 31.344438] aw8624_vibrator_work_routine line=2284
[ 31.344440] aw8624_haptic_play_effect_seq: enter
[ 31.344442] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 31.344444] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 31.344446] aw8624_haptic_play_effect_seq line=1178
[ 31.345090] aw8624_haptic_play_effect_seq line=1200
[ 31.345092] aw8624_haptic_effect_strength: enter
[ 31.345094] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 31.345096] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 31.345101] aw8624_haptic_stop: enter
[ 31.345102] aw8624_haptic_play_go: enter
[ 31.353066] aw8624_haptic_set_gain: ref 4400 vbat 4122
[ 31.353069] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 31.353217] aw8624_haptic_play_repeat_seq: enter
[ 31.353593] aw8624_haptic_active: enter
[ 31.353982] aw8624_interrupt_clear: enter
[ 31.354209] aw8624_interrupt_clear: reg SYSINT=0x21
[ 31.354580] aw8624_haptic_start: enter
[ 31.354581] aw8624_haptic_active: enter
[ 31.354953] aw8624_interrupt_clear: enter
[ 31.355178] aw8624_interrupt_clear: reg SYSINT=0x0
[ 31.355548] aw8624_haptic_play_go: enter
[ 31.355923] aw8624_haptic_play_effect_seq line=1204
[ 31.355925] aw8624_haptic_play_effect_seq: exit
[ 31.355927] aw8624_vibrator_work_routine line=2286
[ 31.355930] aw8624_vibrator_work_routine: exit
[ 31.395937] aw8624_vibrator_timer_func: enter
[ 31.395975] aw8624_vibrator_work_routine: enter
[ 31.395979] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 31.395984] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 31.396139] aw8624_haptic_stop: enter
[ 31.396141] aw8624_haptic_play_go: enter
[ 31.396741] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.396967] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.397193] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.397418] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.397644] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.397869] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.398094] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.398319] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.398545] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.398770] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.399000] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.399231] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.399478] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.399706] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.399933] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.400177] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.400406] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.400635] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.400862] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.401087] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.401683] aw8624_vibrator_work_routine: exit
[ 31.923161] aw8624_haptics_playback: 2914 enter
[ 31.923163] aw8624_haptics_playback: effect_id=0 , val = 0
[ 31.923164] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 31.923169] aw8624_haptics_playback enter cont_mode
[ 31.923178] aw8624_haptics_erase: enter
[ 31.923180] aw8624_haptics_upload_effect: enter
[ 31.923181] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 31.923183] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 31.923184] aw8624_haptics_upload_effect line=2834
[ 31.923185] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 31.923188] aw8624_vibrator_work_routine: enter
[ 31.923189] aw8624_haptics_playback: 2914 enter
[ 31.923189] aw8624_haptics_playback: effect_id=0 , val = 1
[ 31.923190] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 31.923193] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 31.923195] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 31.923196] aw8624_haptics_playback enter cont_mode
[ 31.923504] aw8624_haptic_stop: enter
[ 31.923506] aw8624_haptic_play_go: enter
[ 31.924481] aw8624_haptic_ram_vbat_comp: enter
[ 31.924484] aw8624_vibrator_work_routine line=2284
[ 31.924486] aw8624_haptic_play_effect_seq: enter
[ 31.924488] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 31.924490] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 31.924492] aw8624_haptic_play_effect_seq line=1178
[ 31.925009] aw8624_haptic_play_effect_seq line=1200
[ 31.925011] aw8624_haptic_effect_strength: enter
[ 31.925014] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 31.925015] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 31.925021] aw8624_haptic_stop: enter
[ 31.925022] aw8624_haptic_play_go: enter
[ 31.932977] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 31.932981] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 31.933132] aw8624_haptic_play_repeat_seq: enter
[ 31.933509] aw8624_haptic_active: enter
[ 31.933878] aw8624_interrupt_clear: enter
[ 31.934102] aw8624_interrupt_clear: reg SYSINT=0x21
[ 31.934470] aw8624_haptic_start: enter
[ 31.934472] aw8624_haptic_active: enter
[ 31.934841] aw8624_interrupt_clear: enter
[ 31.935066] aw8624_interrupt_clear: reg SYSINT=0x0
[ 31.935435] aw8624_haptic_play_go: enter
[ 31.935809] aw8624_haptic_play_effect_seq line=1204
[ 31.935812] aw8624_haptic_play_effect_seq: exit
[ 31.935814] aw8624_vibrator_work_routine line=2286
[ 31.935819] aw8624_vibrator_work_routine: exit
[ 31.935823] aw8624_vibrator_work_routine: enter
[ 31.935825] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 31.935831] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 31.935979] aw8624_haptic_stop: enter
[ 31.935980] aw8624_haptic_play_go: enter
[ 31.936583] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 31.936807] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 31.937396] aw8624_haptic_ram_vbat_comp: enter
[ 31.937399] aw8624_vibrator_work_routine line=2284
[ 31.937401] aw8624_haptic_play_effect_seq: enter
[ 31.937403] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 31.937405] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 31.937406] aw8624_haptic_play_effect_seq line=1178
[ 31.937920] aw8624_haptic_play_effect_seq line=1200
[ 31.937922] aw8624_haptic_effect_strength: enter
[ 31.937924] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 31.937925] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 31.937931] aw8624_haptic_stop: enter
[ 31.937932] aw8624_haptic_play_go: enter
[ 31.945880] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 31.945883] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 31.946034] aw8624_haptic_play_repeat_seq: enter
[ 31.946411] aw8624_haptic_active: enter
[ 31.946781] aw8624_interrupt_clear: enter
[ 31.947005] aw8624_interrupt_clear: reg SYSINT=0x21
[ 31.947375] aw8624_haptic_start: enter
[ 31.947377] aw8624_haptic_active: enter
[ 31.947751] aw8624_interrupt_clear: enter
[ 31.947976] aw8624_interrupt_clear: reg SYSINT=0x0
[ 31.948353] aw8624_haptic_play_go: enter
[ 31.948729] aw8624_haptic_play_effect_seq line=1204
[ 31.948732] aw8624_haptic_play_effect_seq: exit
[ 31.948734] aw8624_vibrator_work_routine line=2286
[ 31.948738] aw8624_vibrator_work_routine: exit
[ 31.988745] aw8624_vibrator_timer_func: enter
[ 31.988791] aw8624_vibrator_work_routine: enter
[ 31.988795] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 31.988800] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 31.988964] aw8624_haptic_stop: enter
[ 31.988965] aw8624_haptic_play_go: enter
[ 31.989567] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.989793] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.990019] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.990245] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.990472] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.990699] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.990925] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.991150] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.991377] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.991602] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.991828] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.992058] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.992291] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.992520] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.992746] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.992973] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.993203] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.993430] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.993656] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.993882] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 31.994478] aw8624_vibrator_work_routine: exit
[ 32.007386] type=1400 audit(1658736102.392:2251): avc: denied { read write } for
comm="recovery" name="0" dev="devpts" ino=3 scontext=u:r:recovery:s0
tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
[ 32.007603] type=1400 audit(1658736102.392:2252): avc: denied { open } for
comm="recovery" path="/dev/pts/0" dev="devpts" ino=3 scontext=u:r:recovery:s0
tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
[ 32.007798] type=1400 audit(1658736102.392:2253): avc: denied { ioctl } for
comm="recovery" path="/dev/pts/0" dev="devpts" ino=3 ioctlcmd=0x540e
scontext=u:r:recovery:s0 tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
[ 32.019669] type=1400 audit(1658736102.404:2254): avc: denied { getattr } for
comm="sh" path="/dev/pts/0" dev="devpts" ino=3 scontext=u:r:recovery:s0
tcontext=u:object_r:devpts:s0 tclass=chr_file permissive=1
[ 32.040793] type=1400 audit(1658736102.428:2255): avc: denied { kill } for
comm="recovery" capability=5 scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0
tclass=capability permissive=1
[ 32.558258] aw8624_haptics_playback: 2914 enter
[ 32.558260] aw8624_haptics_playback: effect_id=0 , val = 0
[ 32.558262] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 32.558267] aw8624_haptics_playback enter cont_mode
[ 32.558275] aw8624_haptics_erase: enter
[ 32.558278] aw8624_haptics_upload_effect: enter
[ 32.558279] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 32.558282] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 32.558282] aw8624_haptics_upload_effect line=2834
[ 32.558283] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 32.558287] aw8624_vibrator_work_routine: enter
[ 32.558290] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 32.558291] aw8624_haptics_playback: 2914 enter
[ 32.558294] aw8624_haptics_playback: effect_id=0 , val = 1
[ 32.558296] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 32.558298] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 32.558300] aw8624_haptics_playback enter cont_mode
[ 32.558609] aw8624_haptic_stop: enter
[ 32.558611] aw8624_haptic_play_go: enter
[ 32.559578] aw8624_haptic_ram_vbat_comp: enter
[ 32.559580] aw8624_vibrator_work_routine line=2284
[ 32.559582] aw8624_haptic_play_effect_seq: enter
[ 32.559584] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 32.559586] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 32.559588] aw8624_haptic_play_effect_seq line=1178
[ 32.560109] aw8624_haptic_play_effect_seq line=1200
[ 32.560111] aw8624_haptic_effect_strength: enter
[ 32.560114] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 32.560115] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 32.560120] aw8624_haptic_stop: enter
[ 32.560121] aw8624_haptic_play_go: enter
[ 32.568104] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 32.568106] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 32.568257] aw8624_haptic_play_repeat_seq: enter
[ 32.568634] aw8624_haptic_active: enter
[ 32.569008] aw8624_interrupt_clear: enter
[ 32.569234] aw8624_interrupt_clear: reg SYSINT=0x21
[ 32.569606] aw8624_haptic_start: enter
[ 32.569607] aw8624_haptic_active: enter
[ 32.569988] aw8624_interrupt_clear: enter
[ 32.570214] aw8624_interrupt_clear: reg SYSINT=0x0
[ 32.570585] aw8624_haptic_play_go: enter
[ 32.570961] aw8624_haptic_play_effect_seq line=1204
[ 32.570963] aw8624_haptic_play_effect_seq: exit
[ 32.570965] aw8624_vibrator_work_routine line=2286
[ 32.570970] aw8624_vibrator_work_routine: exit
[ 32.570973] aw8624_vibrator_work_routine: enter
[ 32.570975] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 32.570980] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 32.571128] aw8624_haptic_stop: enter
[ 32.571130] aw8624_haptic_play_go: enter
[ 32.571727] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 32.571952] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 32.572561] aw8624_haptic_ram_vbat_comp: enter
[ 32.572563] aw8624_vibrator_work_routine line=2284
[ 32.572565] aw8624_haptic_play_effect_seq: enter
[ 32.572567] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 32.572569] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 32.572571] aw8624_haptic_play_effect_seq line=1178
[ 32.573088] aw8624_haptic_play_effect_seq line=1200
[ 32.573090] aw8624_haptic_effect_strength: enter
[ 32.573092] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 32.573093] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 32.573098] aw8624_haptic_stop: enter
[ 32.573100] aw8624_haptic_play_go: enter
[ 32.581217] aw8624_haptic_set_gain: ref 4400 vbat 4074
[ 32.581220] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 32.581372] aw8624_haptic_play_repeat_seq: enter
[ 32.581751] aw8624_haptic_active: enter
[ 32.582129] aw8624_interrupt_clear: enter
[ 32.582360] aw8624_interrupt_clear: reg SYSINT=0x21
[ 32.582731] aw8624_haptic_start: enter
[ 32.582733] aw8624_haptic_active: enter
[ 32.583102] aw8624_interrupt_clear: enter
[ 32.583328] aw8624_interrupt_clear: reg SYSINT=0x0
[ 32.583696] aw8624_haptic_play_go: enter
[ 32.584077] aw8624_haptic_play_effect_seq line=1204
[ 32.584079] aw8624_haptic_play_effect_seq: exit
[ 32.584081] aw8624_vibrator_work_routine line=2286
[ 32.584085] aw8624_vibrator_work_routine: exit
[ 32.624088] aw8624_vibrator_timer_func: enter
[ 32.624125] aw8624_vibrator_work_routine: enter
[ 32.624128] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 32.624134] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 32.624291] aw8624_haptic_stop: enter
[ 32.624293] aw8624_haptic_play_go: enter
[ 32.624894] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.625121] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.625346] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.625571] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.625797] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.626023] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.626248] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.626473] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.626699] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.626924] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.627149] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.627378] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.627612] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.627837] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.628070] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.628301] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.628529] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.628756] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.628982] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.629207] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 32.629803] aw8624_vibrator_work_routine: exit
[ 33.093451] aw8624_haptics_playback: 2914 enter
[ 33.093453] aw8624_haptics_playback: effect_id=0 , val = 0
[ 33.093454] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 33.093459] aw8624_haptics_playback enter cont_mode
[ 33.093468] aw8624_haptics_erase: enter
[ 33.093472] aw8624_haptics_upload_effect: enter
[ 33.093473] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 33.093475] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 33.093476] aw8624_haptics_upload_effect line=2834
[ 33.093476] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 33.093479] aw8624_vibrator_work_routine: enter
[ 33.093483] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 33.093484] aw8624_haptics_playback: 2914 enter
[ 33.093486] aw8624_haptics_playback: effect_id=0 , val = 1
[ 33.093489] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 33.093490] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 33.093492] aw8624_haptics_playback enter cont_mode
[ 33.093799] aw8624_haptic_stop: enter
[ 33.093801] aw8624_haptic_play_go: enter
[ 33.094770] aw8624_haptic_ram_vbat_comp: enter
[ 33.094772] aw8624_vibrator_work_routine line=2284
[ 33.094774] aw8624_haptic_play_effect_seq: enter
[ 33.094777] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 33.094779] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 33.094781] aw8624_haptic_play_effect_seq line=1178
[ 33.095298] aw8624_haptic_play_effect_seq line=1200
[ 33.095300] aw8624_haptic_effect_strength: enter
[ 33.095302] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 33.095304] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 33.095309] aw8624_haptic_stop: enter
[ 33.095310] aw8624_haptic_play_go: enter
[ 33.103327] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 33.103329] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 33.103479] aw8624_haptic_play_repeat_seq: enter
[ 33.103855] aw8624_haptic_active: enter
[ 33.104232] aw8624_interrupt_clear: enter
[ 33.104458] aw8624_interrupt_clear: reg SYSINT=0x21
[ 33.104829] aw8624_haptic_start: enter
[ 33.104831] aw8624_haptic_active: enter
[ 33.105201] aw8624_interrupt_clear: enter
[ 33.105430] aw8624_interrupt_clear: reg SYSINT=0x0
[ 33.105801] aw8624_haptic_play_go: enter
[ 33.106177] aw8624_haptic_play_effect_seq line=1204
[ 33.106179] aw8624_haptic_play_effect_seq: exit
[ 33.106181] aw8624_vibrator_work_routine line=2286
[ 33.106186] aw8624_vibrator_work_routine: exit
[ 33.106189] aw8624_vibrator_work_routine: enter
[ 33.106191] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 33.106196] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 33.106344] aw8624_haptic_stop: enter
[ 33.106346] aw8624_haptic_play_go: enter
[ 33.106943] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 33.107169] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 33.107776] aw8624_haptic_ram_vbat_comp: enter
[ 33.107781] aw8624_vibrator_work_routine line=2284
[ 33.107784] aw8624_haptic_play_effect_seq: enter
[ 33.107786] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 33.107788] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 33.107790] aw8624_haptic_play_effect_seq line=1178
[ 33.108352] aw8624_haptic_play_effect_seq line=1200
[ 33.108357] aw8624_haptic_effect_strength: enter
[ 33.108359] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 33.108360] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 33.108373] aw8624_haptic_stop: enter
[ 33.108374] aw8624_haptic_play_go: enter
[ 33.116414] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 33.116418] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 33.116568] aw8624_haptic_play_repeat_seq: enter
[ 33.116945] aw8624_haptic_active: enter
[ 33.117315] aw8624_interrupt_clear: enter
[ 33.117541] aw8624_interrupt_clear: reg SYSINT=0x21
[ 33.117913] aw8624_haptic_start: enter
[ 33.117915] aw8624_haptic_active: enter
[ 33.118284] aw8624_interrupt_clear: enter
[ 33.118509] aw8624_interrupt_clear: reg SYSINT=0x0
[ 33.118877] aw8624_haptic_play_go: enter
[ 33.119251] aw8624_haptic_play_effect_seq line=1204
[ 33.119254] aw8624_haptic_play_effect_seq: exit
[ 33.119256] aw8624_vibrator_work_routine line=2286
[ 33.119260] aw8624_vibrator_work_routine: exit
[ 33.159268] aw8624_vibrator_timer_func: enter
[ 33.159318] aw8624_vibrator_work_routine: enter
[ 33.159323] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 33.159328] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 33.159490] aw8624_haptic_stop: enter
[ 33.159492] aw8624_haptic_play_go: enter
[ 33.160099] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.160327] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.160553] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.160778] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.161004] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.161230] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.161456] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.161682] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.161908] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.162134] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.162360] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.162587] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.162812] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.163038] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.163264] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.163489] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.163715] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.163942] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.164173] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.164403] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 33.165007] aw8624_vibrator_work_routine: exit
[ 33.760029] pm7250b_charger: smblib_pl_enable_work: timer expired, enabling
parallel
[ 33.760037] PL_DISABLE: PL_DELAY_VOTER,4 voting off of val=0
[ 33.760040] AWAKE: PL_DELAY_VOTER,1 voting off of val=0
[ 33.760108] wide_ldo_avdd2_regulator: disabling
[ 33.760112] wide_ldo_dvdd_regulator: disabling
[ 33.760115] depth_ldo_avdd_regulator: disabling
[ 33.760493] pm8008-chip-en: disabling
[ 34.657466] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 34.657630] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 34.657639] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 34.657647] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 34.657862] pm7250b_charger: smblib_run_aicl: re-running AICL
[ 34.657887] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 34.660012] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 291 FCC = 6000000uA FV =
4470000uV
[ 34.660075] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 291 max voltage= 4470000uv
FV = 4470000uV
[ 34.660903] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 34.662282] type=1400 audit(1658736105.048:2256): avc: denied { read } for
comm="[email protected]" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0
tclass=netlink_kobject_uevent_socket permissive=1
[ 34.663094] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 34.664357] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
irq_status = 0x2
[ 34.665002] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 34.666740] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 34.666743] healthd: battery l=72 v=4124 t=29.1 h=2 st=2 c=-282 tl=0 ct=USB
chg=u
[ 34.666828] healthd: battery l=72 v=4124 t=29.1 h=2 st=2 c=-282 tl=0 ct=USB
chg=u
[ 34.669966] healthd: battery l=72 v=4124 t=29.1 h=2 st=2 c=-282 tl=0 ct=USB
chg=u
[ 34.673098] healthd: battery l=72 v=4124 t=29.1 h=2 st=2 c=-282 tl=0 ct=USB
chg=u
[ 34.673181] healthd: battery l=72 v=4124 t=29.1 h=2 st=2 c=-282 tl=0 ct=USB
chg=u
[ 34.676321] healthd: battery l=72 v=4124 t=29.1 h=2 st=2 c=-282 tl=0 ct=USB
chg=u
[ 42.820153] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 42.820322] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 42.820331] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 42.820340] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 42.820555] pm7250b_charger: smblib_run_aicl: re-running AICL
[ 42.820582] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 42.822720] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 292 FCC = 6000000uA FV =
4470000uV
[ 42.822728] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 292 max voltage= 4470000uv
FV = 4470000uV
[ 42.823577] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 42.825678] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
irq_status = 0x2
[ 42.825798] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 42.827678] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 42.829420] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 42.829432] healthd: battery l=72 v=4128 t=29.2 h=2 st=2 c=-307 tl=0 ct=USB
chg=u
[ 42.829522] healthd: battery l=72 v=4128 t=29.2 h=2 st=2 c=-307 tl=0 ct=USB
chg=u
[ 42.832664] healthd: battery l=72 v=4128 t=29.2 h=2 st=2 c=-307 tl=0 ct=USB
chg=u
[ 42.835801] healthd: battery l=72 v=4128 t=29.2 h=2 st=2 c=-307 tl=0 ct=USB
chg=u
[ 42.835884] healthd: battery l=72 v=4128 t=29.2 h=2 st=2 c=-307 tl=0 ct=USB
chg=u
[ 42.839213] healthd: battery l=72 v=4128 t=29.2 h=2 st=2 c=-307 tl=0 ct=USB
chg=u
[ 47.072122] QG_WS: TTF_AWAKE_VOTER,0 voting off of val=0
[ 50.983049] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 50.983215] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 50.983224] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 50.983233] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 50.983442] pm7250b_charger: smblib_run_aicl: re-running AICL
[ 50.983468] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 50.985597] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 293 FCC = 6000000uA FV =
4470000uV
[ 50.985605] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 293 max voltage= 4470000uv
FV = 4470000uV
[ 50.986462] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 50.988691] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 50.988975] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
irq_status = 0x2
[ 50.990574] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 50.992321] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 50.992367] healthd: battery l=72 v=4127 t=29.3 h=2 st=2 c=-348 tl=0 ct=USB
chg=u
[ 50.992459] healthd: battery l=72 v=4127 t=29.3 h=2 st=2 c=-348 tl=0 ct=USB
chg=u
[ 50.995627] healthd: battery l=72 v=4127 t=29.3 h=2 st=2 c=-348 tl=0 ct=USB
chg=u
[ 50.998824] healthd: battery l=72 v=4127 t=29.3 h=2 st=2 c=-348 tl=0 ct=USB
chg=u
[ 50.998908] healthd: battery l=72 v=4127 t=29.3 h=2 st=2 c=-348 tl=0 ct=USB
chg=u
[ 51.002036] healthd: battery l=72 v=4127 t=29.3 h=2 st=2 c=-348 tl=0 ct=USB
chg=u
[ 55.942406] aw8624_haptics_playback: 2914 enter
[ 55.942410] aw8624_haptics_playback: effect_id=0 , val = 0
[ 55.942413] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 55.942422] aw8624_haptics_playback enter cont_mode
[ 55.942439] aw8624_haptics_erase: enter
[ 55.942445] aw8624_haptics_upload_effect: enter
[ 55.942448] aw8624_vibrator_work_routine: enter
[ 55.942451] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 55.942453] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration = 0
[ 55.942456] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 55.942776] aw8624_haptic_stop: enter
[ 55.942778] aw8624_haptic_play_go: enter
[ 55.943750] aw8624_vibrator_work_routine: exit
[ 55.943772] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 55.943775] aw8624_haptics_upload_effect line=2834
[ 55.943777] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 55.943786] aw8624_haptics_playback: 2914 enter
[ 55.943788] aw8624_haptics_playback: effect_id=0 , val = 1
[ 55.943790] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 55.943795] aw8624_haptics_playback enter cont_mode
[ 55.943816] aw8624_vibrator_work_routine: enter
[ 55.943819] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 55.943825] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 55.943973] aw8624_haptic_stop: enter
[ 55.943974] aw8624_haptic_play_go: enter
[ 55.944953] aw8624_haptic_ram_vbat_comp: enter
[ 55.944956] aw8624_vibrator_work_routine line=2284
[ 55.944959] aw8624_haptic_play_effect_seq: enter
[ 55.944961] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 55.944963] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 55.944965] aw8624_haptic_play_effect_seq line=1178
[ 55.945482] aw8624_haptic_play_effect_seq line=1200
[ 55.945484] aw8624_haptic_effect_strength: enter
[ 55.945487] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 55.945488] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 55.945494] aw8624_haptic_stop: enter
[ 55.945495] aw8624_haptic_play_go: enter
[ 55.953440] aw8624_haptic_set_gain: ref 4400 vbat 4122
[ 55.953442] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 55.953592] aw8624_haptic_play_repeat_seq: enter
[ 55.953968] aw8624_haptic_active: enter
[ 55.954340] aw8624_interrupt_clear: enter
[ 55.954565] aw8624_interrupt_clear: reg SYSINT=0x21
[ 55.954935] aw8624_haptic_start: enter
[ 55.954937] aw8624_haptic_active: enter
[ 55.955307] aw8624_interrupt_clear: enter
[ 55.955532] aw8624_interrupt_clear: reg SYSINT=0x0
[ 55.955901] aw8624_haptic_play_go: enter
[ 55.956305] aw8624_haptic_play_effect_seq line=1204
[ 55.956307] aw8624_haptic_play_effect_seq: exit
[ 55.956310] aw8624_vibrator_work_routine line=2286
[ 55.956314] aw8624_vibrator_work_routine: exit
[ 55.996321] aw8624_vibrator_timer_func: enter
[ 55.996367] aw8624_vibrator_work_routine: enter
[ 55.996373] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 55.996381] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 55.996545] aw8624_haptic_stop: enter
[ 55.996547] aw8624_haptic_play_go: enter
[ 55.997148] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 55.997374] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 55.997600] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 55.997826] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 55.998051] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 55.998276] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 55.998501] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 55.998726] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 55.998952] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 55.999178] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 55.999407] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 55.999635] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 55.999863] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 56.000094] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 56.000324] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 56.000555] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 56.000780] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 56.001006] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 56.001232] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 56.001457] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 56.002053] aw8624_vibrator_work_routine: exit
[ 57.082885] aw8624_haptics_playback: 2914 enter
[ 57.082887] aw8624_haptics_playback: effect_id=0 , val = 0
[ 57.082888] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 57.082893] aw8624_haptics_playback enter cont_mode
[ 57.082903] aw8624_haptics_erase: enter
[ 57.082906] aw8624_haptics_upload_effect: enter
[ 57.082907] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 57.082909] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 57.082910] aw8624_haptics_upload_effect line=2834
[ 57.082913] aw8624_vibrator_work_routine: enter
[ 57.082914] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 57.082917] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 57.082920] aw8624_haptics_playback: 2914 enter
[ 57.082922] aw8624_haptics_playback: effect_id=0 , val = 1
[ 57.082924] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 57.082925] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 57.082927] aw8624_haptics_playback enter cont_mode
[ 57.083285] aw8624_haptic_stop: enter
[ 57.083290] aw8624_haptic_play_go: enter
[ 57.084348] aw8624_haptic_ram_vbat_comp: enter
[ 57.084353] aw8624_vibrator_work_routine line=2284
[ 57.084355] aw8624_haptic_play_effect_seq: enter
[ 57.084357] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 57.084359] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 57.084361] aw8624_haptic_play_effect_seq line=1178
[ 57.084885] aw8624_haptic_play_effect_seq line=1200
[ 57.084888] aw8624_haptic_effect_strength: enter
[ 57.084890] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 57.084891] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 57.084899] aw8624_haptic_stop: enter
[ 57.084900] aw8624_haptic_play_go: enter
[ 57.092835] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 57.092839] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 57.092990] aw8624_haptic_play_repeat_seq: enter
[ 57.093368] aw8624_haptic_active: enter
[ 57.093740] aw8624_interrupt_clear: enter
[ 57.093966] aw8624_interrupt_clear: reg SYSINT=0x21
[ 57.094337] aw8624_haptic_start: enter
[ 57.094339] aw8624_haptic_active: enter
[ 57.094710] aw8624_interrupt_clear: enter
[ 57.094935] aw8624_interrupt_clear: reg SYSINT=0x0
[ 57.095307] aw8624_haptic_play_go: enter
[ 57.095683] aw8624_haptic_play_effect_seq line=1204
[ 57.095686] aw8624_haptic_play_effect_seq: exit
[ 57.095688] aw8624_vibrator_work_routine line=2286
[ 57.095693] aw8624_vibrator_work_routine: exit
[ 57.095698] aw8624_vibrator_work_routine: enter
[ 57.095700] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 57.095705] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 57.095854] aw8624_haptic_stop: enter
[ 57.095856] aw8624_haptic_play_go: enter
[ 57.096480] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 57.096707] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 57.097301] aw8624_haptic_ram_vbat_comp: enter
[ 57.097303] aw8624_vibrator_work_routine line=2284
[ 57.097305] aw8624_haptic_play_effect_seq: enter
[ 57.097307] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 57.097310] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 57.097311] aw8624_haptic_play_effect_seq line=1178
[ 57.097830] aw8624_haptic_play_effect_seq line=1200
[ 57.097832] aw8624_haptic_effect_strength: enter
[ 57.097834] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 57.097836] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 57.097841] aw8624_haptic_stop: enter
[ 57.097842] aw8624_haptic_play_go: enter
[ 57.105782] aw8624_haptic_set_gain: ref 4400 vbat 4122
[ 57.105784] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 57.105932] aw8624_haptic_play_repeat_seq: enter
[ 57.106307] aw8624_haptic_active: enter
[ 57.106676] aw8624_interrupt_clear: enter
[ 57.106901] aw8624_interrupt_clear: reg SYSINT=0x21
[ 57.107271] aw8624_haptic_start: enter
[ 57.107273] aw8624_haptic_active: enter
[ 57.107643] aw8624_interrupt_clear: enter
[ 57.107867] aw8624_interrupt_clear: reg SYSINT=0x0
[ 57.108243] aw8624_haptic_play_go: enter
[ 57.108618] aw8624_haptic_play_effect_seq line=1204
[ 57.108620] aw8624_haptic_play_effect_seq: exit
[ 57.108622] aw8624_vibrator_work_routine line=2286
[ 57.108625] aw8624_vibrator_work_routine: exit
[ 57.148631] aw8624_vibrator_timer_func: enter
[ 57.148670] aw8624_vibrator_work_routine: enter
[ 57.148674] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 57.148679] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 57.148833] aw8624_haptic_stop: enter
[ 57.148835] aw8624_haptic_play_go: enter
[ 57.149433] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.149659] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.149884] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.150109] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.150334] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.150559] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.150784] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.151010] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.151235] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.151460] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.151685] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.151911] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.152156] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.152384] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.152610] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.152835] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.153060] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.153285] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.153510] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.153735] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 57.154328] aw8624_vibrator_work_routine: exit
[ 58.559665] aw8624_haptics_playback: 2914 enter
[ 58.559667] aw8624_haptics_playback: effect_id=0 , val = 0
[ 58.559668] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 58.559672] aw8624_haptics_playback enter cont_mode
[ 58.559682] aw8624_haptics_erase: enter
[ 58.559684] aw8624_haptics_upload_effect: enter
[ 58.559685] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 58.559687] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 58.559688] aw8624_haptics_upload_effect line=2834
[ 58.559689] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 58.559692] aw8624_vibrator_work_routine: enter
[ 58.559695] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 58.559696] aw8624_haptics_playback: 2914 enter
[ 58.559699] aw8624_haptics_playback: effect_id=0 , val = 1
[ 58.559701] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 58.559702] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 58.559705] aw8624_haptics_playback enter cont_mode
[ 58.560083] aw8624_haptic_stop: enter
[ 58.560085] aw8624_haptic_play_go: enter
[ 58.561071] aw8624_haptic_ram_vbat_comp: enter
[ 58.561074] aw8624_vibrator_work_routine line=2284
[ 58.561076] aw8624_haptic_play_effect_seq: enter
[ 58.561078] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 58.561080] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 58.561082] aw8624_haptic_play_effect_seq line=1178
[ 58.561600] aw8624_haptic_play_effect_seq line=1200
[ 58.561602] aw8624_haptic_effect_strength: enter
[ 58.561605] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 58.561606] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 58.561612] aw8624_haptic_stop: enter
[ 58.561613] aw8624_haptic_play_go: enter
[ 58.569548] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 58.569550] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 58.569699] aw8624_haptic_play_repeat_seq: enter
[ 58.570073] aw8624_haptic_active: enter
[ 58.570444] aw8624_interrupt_clear: enter
[ 58.570670] aw8624_interrupt_clear: reg SYSINT=0x21
[ 58.571040] aw8624_haptic_start: enter
[ 58.571042] aw8624_haptic_active: enter
[ 58.571412] aw8624_interrupt_clear: enter
[ 58.571637] aw8624_interrupt_clear: reg SYSINT=0x0
[ 58.572006] aw8624_haptic_play_go: enter
[ 58.572451] aw8624_haptic_play_effect_seq line=1204
[ 58.572453] aw8624_haptic_play_effect_seq: exit
[ 58.572456] aw8624_vibrator_work_routine line=2286
[ 58.572460] aw8624_vibrator_work_routine: exit
[ 58.572463] aw8624_vibrator_work_routine: enter
[ 58.572465] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 58.572471] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 58.572619] aw8624_haptic_stop: enter
[ 58.572621] aw8624_haptic_play_go: enter
[ 58.573222] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 58.573451] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 58.574049] aw8624_haptic_ram_vbat_comp: enter
[ 58.574053] aw8624_vibrator_work_routine line=2284
[ 58.574055] aw8624_haptic_play_effect_seq: enter
[ 58.574057] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 58.574059] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 58.574061] aw8624_haptic_play_effect_seq line=1178
[ 58.574581] aw8624_haptic_play_effect_seq line=1200
[ 58.574584] aw8624_haptic_effect_strength: enter
[ 58.574586] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 58.574588] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 58.574595] aw8624_haptic_stop: enter
[ 58.574596] aw8624_haptic_play_go: enter
[ 58.582637] aw8624_haptic_set_gain: ref 4400 vbat 4122
[ 58.582640] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 58.582791] aw8624_haptic_play_repeat_seq: enter
[ 58.583168] aw8624_haptic_active: enter
[ 58.583537] aw8624_interrupt_clear: enter
[ 58.583761] aw8624_interrupt_clear: reg SYSINT=0x21
[ 58.584135] aw8624_haptic_start: enter
[ 58.584137] aw8624_haptic_active: enter
[ 58.584510] aw8624_interrupt_clear: enter
[ 58.584735] aw8624_interrupt_clear: reg SYSINT=0x0
[ 58.585103] aw8624_haptic_play_go: enter
[ 58.585477] aw8624_haptic_play_effect_seq line=1204
[ 58.585480] aw8624_haptic_play_effect_seq: exit
[ 58.585482] aw8624_vibrator_work_routine line=2286
[ 58.585487] aw8624_vibrator_work_routine: exit
[ 58.625491] aw8624_vibrator_timer_func: enter
[ 58.625532] aw8624_vibrator_work_routine: enter
[ 58.625537] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 58.625542] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 58.625700] aw8624_haptic_stop: enter
[ 58.625701] aw8624_haptic_play_go: enter
[ 58.626302] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.626528] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.626753] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.626979] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.627205] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.627432] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.627658] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.627883] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.628139] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.628368] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.628595] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.628821] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.629046] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.629272] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.629498] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.629724] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.629950] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.630177] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.630402] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.630628] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 58.631222] aw8624_vibrator_work_routine: exit
[ 59.149850] pm7250b_charger: smblib_set_charge_param: float voltage = 4450000
(0x55)
[ 59.150013] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting off of val=0
[ 59.150022] CP_DISABLE: CUTOFF_SOC_VOTER,1 voting on of val=1
[ 59.150031] PL_DISABLE: ICL_CHANGE_VOTER,5 voting on of val=1
[ 59.150239] pm7250b_charger: smblib_run_aicl: re-running AICL
[ 59.150265] PL_DISABLE: ICL_CHANGE_VOTER,5 voting off of val=0
[ 59.152396] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 293 FCC = 6000000uA FV =
4470000uV
[ 59.152404] QCOM-STEPCHG: handle_jeita: BATT_TEMP = 293 max voltage= 4470000uv
FV = 4470000uV
[ 59.153229] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 59.155439] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 59.156702] qcom,smb1398-charger 990000.i2c:qcom,smb1396@34:qcom,div2_cp:
irq_status = 0x2
[ 59.157344] QG-K: qg_status_change_work: charge_status=1 charge_done=0
[ 59.159086] QG-K: qg_charge_full_update: msoc=72 health=1 charge_full=0
charge_done=0
[ 59.159100] healthd: battery l=72 v=4118 t=29.3 h=2 st=2 c=-319 tl=0 ct=USB
chg=u
[ 59.159194] healthd: battery l=72 v=4118 t=29.3 h=2 st=2 c=-319 tl=0 ct=USB
chg=u
[ 59.162379] healthd: battery l=72 v=4118 t=29.3 h=2 st=2 c=-319 tl=0 ct=USB
chg=u
[ 59.165548] healthd: battery l=72 v=4118 t=29.3 h=2 st=2 c=-319 tl=0 ct=USB
chg=u
[ 59.165632] healthd: battery l=72 v=4118 t=29.3 h=2 st=2 c=-319 tl=0 ct=USB
chg=u
[ 59.168798] healthd: battery l=72 v=4118 t=29.3 h=2 st=2 c=-319 tl=0 ct=USB
chg=u
[ 59.303364] aw8624_haptics_playback: 2914 enter
[ 59.303365] aw8624_haptics_playback: effect_id=0 , val = 0
[ 59.303366] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 59.303369] aw8624_haptics_playback enter cont_mode
[ 59.303379] aw8624_haptics_erase: enter
[ 59.303382] aw8624_haptics_upload_effect: enter
[ 59.303382] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 59.303385] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 59.303386] aw8624_haptics_upload_effect line=2834
[ 59.303386] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 59.303389] aw8624_vibrator_work_routine: enter
[ 59.303391] aw8624_haptics_playback: 2914 enter
[ 59.303393] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 59.303396] aw8624_haptics_playback: effect_id=0 , val = 1
[ 59.303398] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 59.303400] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 59.303401] aw8624_haptics_playback enter cont_mode
[ 59.303580] aw8624_haptic_stop: enter
[ 59.303583] aw8624_haptic_play_go: enter
[ 59.304605] aw8624_haptic_ram_vbat_comp: enter
[ 59.304612] aw8624_vibrator_work_routine line=2284
[ 59.304614] aw8624_haptic_play_effect_seq: enter
[ 59.304616] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 59.304618] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 59.304620] aw8624_haptic_play_effect_seq line=1178
[ 59.305141] aw8624_haptic_play_effect_seq line=1200
[ 59.305143] aw8624_haptic_effect_strength: enter
[ 59.305146] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 59.305147] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 59.305155] aw8624_haptic_stop: enter
[ 59.305157] aw8624_haptic_play_go: enter
[ 59.313115] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 59.313120] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 59.313275] aw8624_haptic_play_repeat_seq: enter
[ 59.313663] aw8624_haptic_active: enter
[ 59.314037] aw8624_interrupt_clear: enter
[ 59.314263] aw8624_interrupt_clear: reg SYSINT=0x21
[ 59.314633] aw8624_haptic_start: enter
[ 59.314635] aw8624_haptic_active: enter
[ 59.315006] aw8624_interrupt_clear: enter
[ 59.315231] aw8624_interrupt_clear: reg SYSINT=0x0
[ 59.315606] aw8624_haptic_play_go: enter
[ 59.315982] aw8624_haptic_play_effect_seq line=1204
[ 59.315984] aw8624_haptic_play_effect_seq: exit
[ 59.315987] aw8624_vibrator_work_routine line=2286
[ 59.315992] aw8624_vibrator_work_routine: exit
[ 59.315996] aw8624_vibrator_work_routine: enter
[ 59.315998] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 59.316004] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 59.316187] aw8624_haptic_stop: enter
[ 59.316188] aw8624_haptic_play_go: enter
[ 59.316796] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 59.317022] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 59.317616] aw8624_haptic_ram_vbat_comp: enter
[ 59.317619] aw8624_vibrator_work_routine line=2284
[ 59.317621] aw8624_haptic_play_effect_seq: enter
[ 59.317623] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 59.317625] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 59.317627] aw8624_haptic_play_effect_seq line=1178
[ 59.318144] aw8624_haptic_play_effect_seq line=1200
[ 59.318146] aw8624_haptic_effect_strength: enter
[ 59.318148] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 59.318149] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 59.318154] aw8624_haptic_stop: enter
[ 59.318155] aw8624_haptic_play_go: enter
[ 59.326185] aw8624_haptic_set_gain: ref 4400 vbat 4122
[ 59.326187] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 59.326336] aw8624_haptic_play_repeat_seq: enter
[ 59.326711] aw8624_haptic_active: enter
[ 59.327082] aw8624_interrupt_clear: enter
[ 59.327324] aw8624_interrupt_clear: reg SYSINT=0x21
[ 59.327701] aw8624_haptic_start: enter
[ 59.327703] aw8624_haptic_active: enter
[ 59.328077] aw8624_interrupt_clear: enter
[ 59.328307] aw8624_interrupt_clear: reg SYSINT=0x0
[ 59.328676] aw8624_haptic_play_go: enter
[ 59.329051] aw8624_haptic_play_effect_seq line=1204
[ 59.329053] aw8624_haptic_play_effect_seq: exit
[ 59.329055] aw8624_vibrator_work_routine line=2286
[ 59.329058] aw8624_vibrator_work_routine: exit
[ 59.369064] aw8624_vibrator_timer_func: enter
[ 59.369102] aw8624_vibrator_work_routine: enter
[ 59.369106] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 59.369111] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 59.369266] aw8624_haptic_stop: enter
[ 59.369267] aw8624_haptic_play_go: enter
[ 59.369866] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.370092] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.370319] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.370563] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.370810] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.371049] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.371287] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.371520] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.371745] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.371971] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.372203] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.372432] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.372657] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.372882] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.373109] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.373334] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.373558] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.373783] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.374007] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.374232] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 59.374825] aw8624_vibrator_work_routine: exit
[ 60.079319] aw8624_haptics_playback: 2914 enter
[ 60.079321] aw8624_haptics_playback: effect_id=0 , val = 0
[ 60.079322] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 60.079327] aw8624_haptics_playback enter cont_mode
[ 60.079337] aw8624_haptics_erase: enter
[ 60.079340] aw8624_haptics_upload_effect: enter
[ 60.079340] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 60.079343] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 60.079343] aw8624_haptics_upload_effect line=2834
[ 60.079346] aw8624_vibrator_work_routine: enter
[ 60.079347] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 60.079351] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 60.079351] aw8624_haptics_playback: 2914 enter
[ 60.079354] aw8624_haptics_playback: effect_id=0 , val = 1
[ 60.079356] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 60.079358] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 60.079360] aw8624_haptics_playback enter cont_mode
[ 60.079725] aw8624_haptic_stop: enter
[ 60.079727] aw8624_haptic_play_go: enter
[ 60.080734] aw8624_haptic_ram_vbat_comp: enter
[ 60.080737] aw8624_vibrator_work_routine line=2284
[ 60.080739] aw8624_haptic_play_effect_seq: enter
[ 60.080741] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 60.080743] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 60.080745] aw8624_haptic_play_effect_seq line=1178
[ 60.081264] aw8624_haptic_play_effect_seq line=1200
[ 60.081266] aw8624_haptic_effect_strength: enter
[ 60.081268] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 60.081271] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 60.081276] aw8624_haptic_stop: enter
[ 60.081277] aw8624_haptic_play_go: enter
[ 60.089218] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 60.089220] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 60.089370] aw8624_haptic_play_repeat_seq: enter
[ 60.089747] aw8624_haptic_active: enter
[ 60.090120] aw8624_interrupt_clear: enter
[ 60.090346] aw8624_interrupt_clear: reg SYSINT=0x21
[ 60.090717] aw8624_haptic_start: enter
[ 60.090719] aw8624_haptic_active: enter
[ 60.091102] aw8624_interrupt_clear: enter
[ 60.091327] aw8624_interrupt_clear: reg SYSINT=0x0
[ 60.091697] aw8624_haptic_play_go: enter
[ 60.092076] aw8624_haptic_play_effect_seq line=1204
[ 60.092078] aw8624_haptic_play_effect_seq: exit
[ 60.092081] aw8624_vibrator_work_routine line=2286
[ 60.092085] aw8624_vibrator_work_routine: exit
[ 60.092088] aw8624_vibrator_work_routine: enter
[ 60.092090] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 60.092095] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 60.092246] aw8624_haptic_stop: enter
[ 60.092247] aw8624_haptic_play_go: enter
[ 60.092853] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 60.093079] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 60.093672] aw8624_haptic_ram_vbat_comp: enter
[ 60.093675] aw8624_vibrator_work_routine line=2284
[ 60.093676] aw8624_haptic_play_effect_seq: enter
[ 60.093678] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 60.093680] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 60.093682] aw8624_haptic_play_effect_seq line=1178
[ 60.094199] aw8624_haptic_play_effect_seq line=1200
[ 60.094201] aw8624_haptic_effect_strength: enter
[ 60.094202] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 60.094204] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 60.094209] aw8624_haptic_stop: enter
[ 60.094210] aw8624_haptic_play_go: enter
[ 60.102151] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 60.102153] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 60.102301] aw8624_haptic_play_repeat_seq: enter
[ 60.102676] aw8624_haptic_active: enter
[ 60.103045] aw8624_interrupt_clear: enter
[ 60.103270] aw8624_interrupt_clear: reg SYSINT=0x21
[ 60.103639] aw8624_haptic_start: enter
[ 60.103641] aw8624_haptic_active: enter
[ 60.104012] aw8624_interrupt_clear: enter
[ 60.104291] aw8624_interrupt_clear: reg SYSINT=0x0
[ 60.104661] aw8624_haptic_play_go: enter
[ 60.105035] aw8624_haptic_play_effect_seq line=1204
[ 60.105037] aw8624_haptic_play_effect_seq: exit
[ 60.105039] aw8624_vibrator_work_routine line=2286
[ 60.105042] aw8624_vibrator_work_routine: exit
[ 60.145053] aw8624_vibrator_timer_func: enter
[ 60.145102] aw8624_vibrator_work_routine: enter
[ 60.145109] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 60.145117] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 60.145283] aw8624_haptic_stop: enter
[ 60.145285] aw8624_haptic_play_go: enter
[ 60.145886] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.146111] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.146336] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.146560] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.146786] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.147010] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.147235] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.147461] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.147686] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.147911] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.148157] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.148386] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.148612] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.148838] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.149062] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.149288] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.149512] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.149737] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.149961] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.150186] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.150779] aw8624_vibrator_work_routine: exit
[ 60.863649] aw8624_haptics_playback: 2914 enter
[ 60.863651] aw8624_haptics_playback: effect_id=0 , val = 0
[ 60.863652] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 60.863657] aw8624_haptics_playback enter cont_mode
[ 60.863666] aw8624_haptics_erase: enter
[ 60.863668] aw8624_haptics_upload_effect: enter
[ 60.863669] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 60.863671] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 60.863672] aw8624_haptics_upload_effect line=2834
[ 60.863673] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 60.863676] aw8624_vibrator_work_routine: enter
[ 60.863679] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 60.863680] aw8624_haptics_playback: 2914 enter
[ 60.863682] aw8624_haptics_playback: effect_id=0 , val = 1
[ 60.863685] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 60.863686] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 60.863688] aw8624_haptics_playback enter cont_mode
[ 60.864013] aw8624_haptic_stop: enter
[ 60.864045] aw8624_haptic_play_go: enter
[ 60.865079] aw8624_haptic_ram_vbat_comp: enter
[ 60.865083] aw8624_vibrator_work_routine line=2284
[ 60.865085] aw8624_haptic_play_effect_seq: enter
[ 60.865087] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 60.865090] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 60.865091] aw8624_haptic_play_effect_seq line=1178
[ 60.865611] aw8624_haptic_play_effect_seq line=1200
[ 60.865613] aw8624_haptic_effect_strength: enter
[ 60.865615] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 60.865617] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 60.865625] aw8624_haptic_stop: enter
[ 60.865626] aw8624_haptic_play_go: enter
[ 60.873580] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 60.873584] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 60.873735] aw8624_haptic_play_repeat_seq: enter
[ 60.874113] aw8624_haptic_active: enter
[ 60.874484] aw8624_interrupt_clear: enter
[ 60.874709] aw8624_interrupt_clear: reg SYSINT=0x21
[ 60.875078] aw8624_haptic_start: enter
[ 60.875080] aw8624_haptic_active: enter
[ 60.875460] aw8624_interrupt_clear: enter
[ 60.875687] aw8624_interrupt_clear: reg SYSINT=0x0
[ 60.876062] aw8624_haptic_play_go: enter
[ 60.876443] aw8624_haptic_play_effect_seq line=1204
[ 60.876446] aw8624_haptic_play_effect_seq: exit
[ 60.876448] aw8624_vibrator_work_routine line=2286
[ 60.876453] aw8624_vibrator_work_routine: exit
[ 60.876457] aw8624_vibrator_work_routine: enter
[ 60.876459] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 60.876465] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 60.876613] aw8624_haptic_stop: enter
[ 60.876615] aw8624_haptic_play_go: enter
[ 60.877210] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 60.877435] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 60.878026] aw8624_haptic_ram_vbat_comp: enter
[ 60.878028] aw8624_vibrator_work_routine line=2284
[ 60.878030] aw8624_haptic_play_effect_seq: enter
[ 60.878032] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 60.878034] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 60.878036] aw8624_haptic_play_effect_seq line=1178
[ 60.878552] aw8624_haptic_play_effect_seq line=1200
[ 60.878554] aw8624_haptic_effect_strength: enter
[ 60.878556] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 60.878558] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 60.878562] aw8624_haptic_stop: enter
[ 60.878564] aw8624_haptic_play_go: enter
[ 60.886553] aw8624_haptic_set_gain: ref 4400 vbat 4098
[ 60.886556] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 60.886707] aw8624_haptic_play_repeat_seq: enter
[ 60.887084] aw8624_haptic_active: enter
[ 60.887454] aw8624_interrupt_clear: enter
[ 60.887679] aw8624_interrupt_clear: reg SYSINT=0x21
[ 60.888069] aw8624_haptic_start: enter
[ 60.888071] aw8624_haptic_active: enter
[ 60.888445] aw8624_interrupt_clear: enter
[ 60.888670] aw8624_interrupt_clear: reg SYSINT=0x0
[ 60.889039] aw8624_haptic_play_go: enter
[ 60.889413] aw8624_haptic_play_effect_seq line=1204
[ 60.889415] aw8624_haptic_play_effect_seq: exit
[ 60.889417] aw8624_vibrator_work_routine line=2286
[ 60.889421] aw8624_vibrator_work_routine: exit
[ 60.929429] aw8624_vibrator_timer_func: enter
[ 60.929482] aw8624_vibrator_work_routine: enter
[ 60.929486] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 60.929492] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 60.929657] aw8624_haptic_stop: enter
[ 60.929659] aw8624_haptic_play_go: enter
[ 60.930262] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.930488] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.930714] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.930940] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.931167] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.931393] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.931620] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.931846] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.932076] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.932306] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.932531] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.932758] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.932983] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.933209] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.933446] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.933690] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.933916] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.934142] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.934369] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.934593] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 60.935191] aw8624_vibrator_work_routine: exit
[ 62.423245] aw8624_haptics_playback: 2914 enter
[ 62.423247] aw8624_haptics_playback: effect_id=0 , val = 0
[ 62.423248] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 62.423253] aw8624_haptics_playback enter cont_mode
[ 62.423263] aw8624_haptics_erase: enter
[ 62.423265] aw8624_haptics_upload_effect: enter
[ 62.423266] aw8624_haptics_upload_effect: effect-
>type=0x52,FF_CONSTANT=0x52,FF_PERIODIC=0x51
[ 62.423268] aw8624_haptics_upload_effect: effect_type is FF_CONSTANT!
[ 62.423269] aw8624_haptics_upload_effect line=2834
[ 62.423270] aw8624_haptics_upload_effect\x092905\x09aw8624->effect_type= 0x52
[ 62.423274] aw8624_vibrator_work_routine: enter
[ 62.423274] aw8624_haptics_playback: 2914 enter
[ 62.423275] aw8624_haptics_playback: effect_id=0 , val = 1
[ 62.423276] aw8624_haptics_playback: aw8624->effect_id=10 , aw8624-
>activate_mode = 3
[ 62.423279] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 62.423281] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 62.423282] aw8624_haptics_playback enter cont_mode
[ 62.423643] aw8624_haptic_stop: enter
[ 62.423645] aw8624_haptic_play_go: enter
[ 62.424649] aw8624_haptic_ram_vbat_comp: enter
[ 62.424651] aw8624_vibrator_work_routine line=2284
[ 62.424653] aw8624_haptic_play_effect_seq: enter
[ 62.424655] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 62.424658] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 62.424659] aw8624_haptic_play_effect_seq line=1178
[ 62.425180] aw8624_haptic_play_effect_seq line=1200
[ 62.425183] aw8624_haptic_effect_strength: enter
[ 62.425185] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 62.425187] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 62.425194] aw8624_haptic_stop: enter
[ 62.425195] aw8624_haptic_play_go: enter
[ 62.433142] aw8624_haptic_set_gain: ref 4400 vbat 4122
[ 62.433144] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 62.433293] aw8624_haptic_play_repeat_seq: enter
[ 62.433667] aw8624_haptic_active: enter
[ 62.434038] aw8624_interrupt_clear: enter
[ 62.434263] aw8624_interrupt_clear: reg SYSINT=0x21
[ 62.434633] aw8624_haptic_start: enter
[ 62.434635] aw8624_haptic_active: enter
[ 62.435004] aw8624_interrupt_clear: enter
[ 62.435228] aw8624_interrupt_clear: reg SYSINT=0x0
[ 62.435597] aw8624_haptic_play_go: enter
[ 62.435970] aw8624_haptic_play_effect_seq line=1204
[ 62.435972] aw8624_haptic_play_effect_seq: exit
[ 62.435974] aw8624_vibrator_work_routine line=2286
[ 62.435979] aw8624_vibrator_work_routine: exit
[ 62.435983] aw8624_vibrator_work_routine: enter
[ 62.435985] aw8624_vibrator_work_routine: state=1 activate_mode = 3 duration =
40
[ 62.435990] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 62.436144] aw8624_haptic_stop: enter
[ 62.436146] aw8624_haptic_play_go: enter
[ 62.436750] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x01
[ 62.436976] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x02
[ 62.437566] aw8624_haptic_ram_vbat_comp: enter
[ 62.437568] aw8624_vibrator_work_routine line=2284
[ 62.437570] aw8624_haptic_play_effect_seq: enter
[ 62.437572] aw8624_haptic_play_effect_seq:aw8624->effect_id =10
[ 62.437574] aw8624_haptic_play_effect_seq:aw8624->activate_mode =3
[ 62.437575] aw8624_haptic_play_effect_seq line=1178
[ 62.438090] aw8624_haptic_play_effect_seq line=1200
[ 62.438092] aw8624_haptic_effect_strength: enter
[ 62.438094] aw8624_haptic_effect_strength: aw8624->play.vmax_mv =0x0
[ 62.438096] aw8624_haptic_effect_strength: aw8624->level =0x1e
[ 62.438101] aw8624_haptic_stop: enter
[ 62.438102] aw8624_haptic_play_go: enter
[ 62.446031] aw8624_haptic_set_gain: ref 4400 vbat 4122
[ 62.446033] aw8624_haptic_set_gain: enable vbat comp, level = 1e comp level = 20
[ 62.446181] aw8624_haptic_play_repeat_seq: enter
[ 62.446555] aw8624_haptic_active: enter
[ 62.446924] aw8624_interrupt_clear: enter
[ 62.447149] aw8624_interrupt_clear: reg SYSINT=0x21
[ 62.447519] aw8624_haptic_start: enter
[ 62.447521] aw8624_haptic_active: enter
[ 62.447916] aw8624_interrupt_clear: enter
[ 62.448165] aw8624_interrupt_clear: reg SYSINT=0x0
[ 62.448541] aw8624_haptic_play_go: enter
[ 62.448915] aw8624_haptic_play_effect_seq line=1204
[ 62.448916] aw8624_haptic_play_effect_seq: exit
[ 62.448918] aw8624_vibrator_work_routine line=2286
[ 62.448921] aw8624_vibrator_work_routine: exit
[ 62.488928] aw8624_vibrator_timer_func: enter
[ 62.488967] aw8624_vibrator_work_routine: enter
[ 62.488971] aw8624_vibrator_work_routine: state=0 activate_mode = 3 duration =
40
[ 62.488976] aw8624_haptic_upload_lra: f0_cali_lra=62
[ 62.489130] aw8624_haptic_stop: enter
[ 62.489131] aw8624_haptic_play_go: enter
[ 62.489730] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.489955] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.490180] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.490406] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.490631] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.490857] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.491082] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.491307] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.491532] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.491756] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.491981] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.492211] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.492440] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.492665] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.492890] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.493115] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.493340] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.493565] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.493790] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.494014] aw8624_haptic_stop_delay: wait for standby, reg glb_state=0x07
[ 62.494608] aw8624_vibrator_work_routine: exit
[ 62.564980] type=1400 audit(1658736132.952:2257): avc: denied { read } for
comm="dmesg" name="kmsg" dev="tmpfs" ino=31190 scontext=u:r:recovery:s0
tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=1
[ 62.565151] type=1400 audit(1658736132.952:2258): avc: denied { open } for
comm="dmesg" path="/dev/kmsg" dev="tmpfs" ino=31190 scontext=u:r:recovery:s0
tcontext=u:object_r:kmsg_device:s0 tclass=chr_file permissive=1