Product data sheet XB5AS542

Characteristics red Ø40 Emergency switching off pushbutton

Ø22 latching turn release 1NC

Main
Range of product Harmony XB5
Product or component Complete emergency switching off pushbutton
type
Device short name XB5
Bezel material Plastic
Fixing collar material Plastic
Mounting diameter 22 mm
Sale per indivisible 1
quantity
Shape of signaling unit Round
head
Type of operator Mechanical latching

It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof.
Reset Turn to release
Operator profile Red mushroom Ø 40 mm unmarked
Contacts type and com- 1 NC
position
Contacts operation Slow-break
Connections - terminals Screw clamp terminals: <= 2 x 1.5 mm² with cable
end conforming to EN 60947-1
Screw clamp terminals: >= 1 x 0.22 mm² without ca-

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein.
This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications.
ble end conforming to EN 60947-1

Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.
Complementary
CAD overall width 40 mm
CAD overall height 43 mm
CAD overall depth 82 mm
Terminals description ISO n°1 (21-22)NC
Product weight 0.06 kg
Resistance to high pressure washer 7000000 Pa at 55 °C,distance: 0.1 m
Contacts usage Standard contacts
Positive opening With positive opening conforming to EN/IEC 60947-5-1 appendix K
Operating travel 4.3 mm (total travel)
1.5 mm (NC changing electrical state)
Mechanical durability 300000 cycles
Tightening torque 0.8...1.2 N.m conforming to EN 60947-1
Shape of screw head Slotted head compatible with flat Ø 5.5 mm screwdriver
Slotted head compatible with flat Ø 4 mm screwdriver
Cross head compatible with pozidriv No 1 screwdriver
Cross head compatible with Philips no 1 screwdriver
Contacts material Silver alloy (Ag/Ni)
Short circuit protection 10 A cartridge fuse type gG conforming to EN/IEC 60947-5-1
[Ith] conventional free air thermal current 10 A conforming to EN/IEC 60947-5-1
[Ui] rated insulation voltage 600 V (degree of pollution: 3) conforming to EN 60947-1
[Uimp] rated impulse withstand voltage 6 kV conforming to EN 60947-1
[Ie] rated operational current 6 A at 120 V, AC-15, A600 conforming to EN/IEC 60947-5-1
0.27 A at 250 V, DC-13, Q600 conforming to EN/IEC 60947-5-1
0.1 A at 600 V, DC-13, Q600 conforming to EN/IEC 60947-5-1
1.2 A at 600 V, AC-15, A600 conforming to EN/IEC 60947-5-1
0.55 A at 125 V, DC-13, Q600 conforming to EN/IEC 60947-5-1
3 A at 240 V, AC-15, A600 conforming to EN/IEC 60947-5-1

Nov 23, 2011

1
Electrical durability 1000000 cycles, AC-15, 3 A at 120 V, operating rate: 3600 cyc/h, load factor: 0.5
conforming to EN/IEC 60947-5-1 appendix C
1000000 cycles, AC-15, 2 A at 230 V, operating rate: 3600 cyc/h, load factor: 0.5
conforming to EN/IEC 60947-5-1 appendix C
1000000 cycles, AC-15, 4 A at 24 V, operating rate: 3600 cyc/h, load factor: 0.5
conforming to EN/IEC 60947-5-1 appendix C
1000000 cycles, DC-13, 0.5 A at 24 V, operating rate: 3600 cyc/h, load factor: 0.5
conforming to EN/IEC 60947-5-1 appendix C
1000000 cycles, DC-13, 0.2 A at 110 V, operating rate: 3600 cyc/h, load factor:
0.5 conforming to EN/IEC 60947-5-1 appendix C
Electrical reliability IEC 60947-5-4 Λ < 10exp(-8) at 17 V, 5 mA in clean environment conforming to EN/IEC
60947-5-4
Λ < 10exp(-6) at 5 V, 1 mA in clean environment conforming to EN/IEC
60947-5-4

Environment
Protective treatment TH
Ambient air temperature for storage -40...70 °C
Ambient air temperature for operation -25...70 °C
Class of protection against electric shock Class II conforming to IEC 60536
IP degree of protection IP66 conforming to IEC 60529
NEMA degree of protection NEMA 13
NEMA 4X
IK degree of protection IK03 conforming to IEC 50102
Standards EN/IEC 60947-1
CSA C22-2 No 14
EN/IEC 60947-5-5
UL 508
JIS C 4520
IEC 60364-5-53
EN/IEC 60947-5-4
EN/IEC 60947-5-1
Product certifications DNV (Det Norske Veritas)
LROS (Lloyds register of shipping)
CSA
BV
GL
RINA
UL listed
Vibration resistance 5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6
Shock resistance 30 gn for 18 ms half sine wave acceleration conforming to IEC 60068-2-27
50 gn for 11 ms half sine wave acceleration conforming to IEC 60068-2-27

2
Product data sheet XB5AS542
Dimensions Drawings

Dimensions of Emergency Stop Mushroom Head Pushbuttons

Emergency Stop Mushroom Head Pushbuttons, Trigger Action and Mechanical Latching
XB5 AT845

e: clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.

XB5 AS8445

e: clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.

XB5 AS9445

e: clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.

Emergency Switching Off Mushroom Head Pushbuttons, Mechanical Latching

XB5 AT42

e: clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.

XB5 AS542

e: clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.

3
XB5 AS142

e: clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.

4
Product data sheet XB5AS542
Mounting and Clearance

Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)

Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board

(1) Diameter on finished panel or support

(2) For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5 AZ902 is recommended.
(3) Ø22.5 mm recommended (Ø22.3 0
+0.4
) / Ø0.89 in. recommended (Ø0.88 in. 0
+0.016
)

Connections a in mm a in in. b in mm b in in.

By screw clamp terminals or plug-in connector 40 1.57 30 1.18

By Faston connectors 45 1.77 32 1.26

On printed circuit board 30 1.18 30 1.18

Detail of Lug Recess

(1) Diameter on finished panel or support

(2) For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5 AZ902 is recommended.
(3) Ø22.5 mm recommended (Ø22.3 0
+0.4
) / Ø0.89 in. recommended (Ø0.88 in. 0
+0.016
)