0% found this document useful (0 votes)
23 views53 pages

FAA 2020 0845 0005 - Attachment - 2

This Service Bulletin addresses the revision of overhead stowage compartments for A318/A319/A320/A321 aircraft, specifically focusing on the replacement of pivoting bins to enhance durability and reduce unscheduled maintenance. The bulletin includes details on the modification, applicable aircraft, and associated costs, with a total estimated labor time of 35.5 hours for the replacement task. Operators are advised to implement this modification at the earliest opportunity to prevent operational disruptions.

Uploaded by

Leonardo Lara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
23 views53 pages

FAA 2020 0845 0005 - Attachment - 2

This Service Bulletin addresses the revision of overhead stowage compartments for A318/A319/A320/A321 aircraft, specifically focusing on the replacement of pivoting bins to enhance durability and reduce unscheduled maintenance. The bulletin includes details on the modification, applicable aircraft, and associated costs, with a total estimated labor time of 35.5 hours for the replacement task. Operators are advised to implement this modification at the earliest opportunity to prevent operational disruptions.

Uploaded by

Leonardo Lara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 53

A318/A319/A320/A321

SERVICE BULLETIN
CONFIG 001
CONF 001
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE

The content of this document is the property of Airbus.


It is supplied in confidence and commercial security on its contents must be maintained.
It must not be used for any purpose other than that for which it is supplied, nor may information
contained in it be disclosed to unauthorized persons.
It must not be reproduced in whole or in part without permission in writing from the owners of the
copyright. Requests for reproduction of any data in this document and the media authorized for it must
be addressed to Airbus.

ATA SYSTEM: 25

TITLE: EQUIPMENT/FURNISHINGS - OVERHEAD STOWAGE COMPARTMENTS -


REVISE BIN BASE FOR PIVOTING OHSC
MODIFICATION No.:
162563K30846

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 1
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001 REVISION TRANSMITTAL SHEET
ATA SYSTEM: 25

TITLE: EQUIPMENT/FURNISHINGS - OVERHEAD STOWAGE COMPARTMENTS -


REVISE BIN BASE FOR PIVOTING OHSC
REVISION TRANSMITTAL SHEET
This page transmits Revision No. 01 of Service Bulletin No. A320-25-1BPV.
A. ADDITIONAL WORK
No additional work is required by this revision.
B. REASON
Revision No. 01 issued to amend a PN in KIT D01.
C. CHANGES

MATERIAL INFORMATION
LIST OF NEW PARTS
Part kit 251BPVD01R03 Part Number amended to enable kit delivery
ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-25-XX-1BPV-01000-93AA-A Replacement of the Bin in the Pivoting
Overhead Stowage Compartment
PROCEDURE
A320-A-25- Bin 2FR EE STIFF added
XX-1BPV-01001-920A-
A Replace the Bin of
the Pivoting Overhead
Stowage Compartment
(OHSC)
D. FILING INSTRUCTIONS
This Service Bulletin has been generated electronically and is reissued as a complete
document. Replace the complete document.
Put this Revision Transmittal Sheet in front of the Service Bulletin.
E. HISTORY OF PREVIOUS REVISIONS
No previous revision
F. REVISION SEQUENCE
ORIGINAL: May 27/19
REVISION No. : 01 - Jun 27/19

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 2
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001 SUMMARY
ATA SYSTEM: 25

TITLE: EQUIPMENT/FURNISHINGS - OVERHEAD STOWAGE COMPARTMENTS -


REVISE BIN BASE FOR PIVOTING OHSC
SUMMARY
This summary is for information only and is not approved for modification of the aircraft.
A. MODIFICATIONS

MODIFICATION CLASSIFICATION
MAJOR None
MINOR 162563K30846

NOTE: As per EASA IR 21, a minor change is one that has no appreciable effect on the
mass, balance, structural strength, reliability, operational characteristics affecting
the airworthiness of the product. All other changes are major changes.

B. REASON

(1) History
Several damages to the pivoting bins of the Overhead Stowage Compartments (OHSC)
have been reported in-service leading to unscheduled and additional maintenance.
(2) Objective/Action
This Service Bulletin is published to advise the operators of the affected MSNs to
install new pivoting bins which provide a more robust bonding design.
(3) Advantages
The accomplishment of this Service Bulletin will improve the robustness and increase
the lifetime of the pivoting OHSCs leading to a reduction in unscheduled maintenance.
(4) Operational/Maintenance Consequences
None
C. GENERAL EVALUATION

EVALUATION TABLE
COMPLIANCE RECOMMENDED COST SAVING NO
A/C OPERATION NO VENDOR SB NO
AFFECTED
CANCELS INSPECTION SB NO ETOPS AFFECTED NO
PAX COMFORT AFFECTED YES POTENTIAL AD NO
RELIABILITY AFFECTED NO STRUCTURAL LIFE EXTENSION NO
LIFE LIMIT NO LINE MAINTENANCE AFFECTED NO

NOTE: Service Bulletin recommended to be accomplished to prevent significant


operational disruptions.

D. MAINTENANCE CONFIGURATION
No specific aircraft maintenance configuration required.
E. MATERIAL PRICE INFORMATION

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 3
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001 SUMMARY
(1) Replacement of the Bin in the Pivoting Overhead Stowage Compartment
(a) Task set A320-A-25-XX-1BPV-01000-93AA-A Replacement of the Bin in the
Pivoting Overhead Stowage Compartment

MATERIAL PRICE INFORMATION TABLE


QTY
MATERIAL SET PRICE PER A/C MAIN PARTS
PER A/C
Part kit 251BPVD01R03 1 539000.00 USD Bin assemblies
Part kit 251BPVD05R01 1 60.00 USD Washers and screws
TOTAL 539060.00 USD
Components See SB See Note Brackets

NOTE: Price information to be obtained from the given supplier.

F. APPLICABILITY
This Service Bulletin is applicable to this (these) operator(s):
ACA DAL LAN TCX
G. CONCURRENT REQUIREMENTS
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of the following Service Bulletin:

Service Bulletin(s) Modification(s)


Ref. SB A320-25-1BPW

NOTE: Ref. SB A320-25-1BPW (EQUIPMENT/FURNISHINGS - OVERHEAD STOWAGE


COMPARTMENTS - REVISE INSTALLATION OF DAMPENER FOR POHSC BINS).

H. NATURE OF THE WORK

(1) Replacement of the Bin in the Pivoting Overhead Stowage Compartment


(a) Task set A320-A-25-XX-1BPV-01000-93AA-A Replacement of the Bin in the
Pivoting Overhead Stowage Compartment

AIRCRAFT NO
EQUIPMENT YES
I. MANPOWER

(1) Replacement of the Bin in the Pivoting Overhead Stowage Compartment


(a) Task set A320-A-25-XX-1BPV-01000-93AA-A Replacement of the Bin in the
Pivoting Overhead Stowage Compartment

MANPOWER
TOTAL MAN-HOURS 35.50 h
ELAPSED TIME (HOURS) 21.00 h

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 4
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001 SUMMARY
J. GENERAL OVERVIEW
CONF 001

Z200

OVERHEAD STOWAGE COMPARTMENT


TO BE MODIFIED

A
TYPICAL

ICN-A320-A-25XX1BPV-A-FAPE3-00YY5-A-001-01

Figure ICN-A320-A-25XX1BPV-A-FAPE3-00YY5-A-001-01 SHEET 1/1


REV 00 May 27/19 A320-25-1BPV
General overview
REV 01 Jun 27/19 Page 5
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
ATA SYSTEM: 25

TITLE: EQUIPMENT/FURNISHINGS - OVERHEAD STOWAGE COMPARTMENTS -


REVISE BIN BASE FOR PIVOTING OHSC
1. PLANNING INFORMATION
A. APPLICABILITY

NOTE: An accomplishment Overhead Stowage Compartment (OHSC) per OHSC is allowed.

(1) Models
ON A/C 06923, 07031, 07061, 07112, 07149, 07165, 07214, 07233, 07268, 07281, 07293,
07304, 07327, 07364, 07373, 07381, 07436, 07441, 07479, 07546, 07592, 07672, 07707,
07709, 07765, 07777, 07840, 07845, 07885, 07896, 07943, 07973, 08026, 08036, 08040,
08063, 08078, 08080, 08128, 08134, 08159, 08171, 08180, 08191, 08200, 08207, 08227,
08233, 08250, 08251, 08258, 08279, 08283, 08316, 08322, 08332, 08339, 08359, 08370,
08388, 08423, 08447, 08502, 08530, 08536, 08694, 08695, 08697, 08713, 08734, 08763,
08765, 08809, 08810, 08812, 08822, 08854, 08856, 08858, 08859, 08914-08916, 08974,
08975, 09025, 09027, 09028, 09066
321-211
CONF 001
(2) MSN by configuration

MSN CONFIGURATION
06923 07031 07061 07112 07149 07165 07214 07233 07268 001
07281 07293 07304 07327 07364 07373 07381 07436 07441
07479 07546 07592 07672 07707 07709 07765 07777 07840
07845 07885 07896 07943 07973 08026 08036 08040 08063
08078 08080 08128 08134 08159 08171 08180 08191 08200
08207 08227 08233 08250 08251 08258 08279 08283 08316
08322 08332 08339 08359 08370 08388 08423 08447 08502
08530 08536 08694 08695 08697 08713 08734 08763 08765
08809 08810 08812 08822 08854 08856 08858 08859 08914
08915 08916 08974 08975 09025 09027 09028 09066
(3) Configuration definition
Configuration 001
CONF 001 is applicable for all DAL01 aircraft affected by this Service Bulletin.
CONF 001 retrofits following modifications: 162563K30846.
B. CONCURRENT REQUIREMENTS
Accomplishment of this Service Bulletin requires the prior or simultaneous accomplishment
of the following Service Bulletin:

Service Bulletin(s) Modification(s)


Ref. SB A320-25-1BPW

NOTE: Ref. SB A320-25-1BPW (EQUIPMENT/FURNISHINGS - OVERHEAD STOWAGE


COMPARTMENTS - REVISE INSTALLATION OF DAMPENER FOR POHSC BINS).

C. REASON

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 6
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
(1) History
Several damages to the pivoting bins of the Overhead Stowage Compartments (OHSC)
have been reported in-service leading to unscheduled and additional maintenance.
(2) Objective/Action
This Service Bulletin is published to advise the operators of the affected MSNs to
install new pivoting bins which provide a more robust bonding design.
(3) Advantages
The accomplishment of this Service Bulletin will improve the robustness and increase
the lifetime of the pivoting OHSCs leading to a reduction in unscheduled maintenance.
(4) Operational/Maintenance Consequences
None
D. DESCRIPTION
To accomplish this Service Bulletin it is necessary to:
(1) Replacement of the Bin in the Pivoting Overhead Stowage Compartment
(a) Task set A320-A-25-XX-1BPV-01000-93AA-A Replacement of the Bin in the
Pivoting Overhead Stowage Compartment
1 Replace the Bin of the Pivoting Overhead Stowage Compartment (OHSC)
2 Reidentify the Overhead Stowage Compartment Assemblies
E. COMPLIANCE

(1) Classification
RECOMMENDED: Service Bulletin recommended to be accomplished to prevent
significant operational disruptions.
(2) Accomplishment Timescale
Accomplishment of this Service Bulletin is recommended at the earliest opportunity
where manpower and facilities are available.
F. APPROVAL
The technical content of this document is approved under the authority of Design
Organisation Approval No. EASA.21J.031.
If an aircraft listed in the applicability has a modification or repair embodied that is not
of AIRBUS origin, and which affects the content of this Service Bulletin, the operator
is responsible for obtaining approval by its airworthiness authority for any adaptation
necessary before incorporation of the Service Bulletin.
G. MANPOWER
The manpower estimates given in this Service Bulletin are based on the direct labor cost to
do the work. These estimates assume that the work will be done by experienced personnel,
and may need to be revised upwards to suit operator’s circumstances. The estimates do not
include the time to prepare, plan or inspect the work. Manufacture and procurement of parts
and tools, drying times for paints, sealants, etc., and general administration work are also
not included.
(1) Replacement of the Bin in the Pivoting Overhead Stowage Compartment
(a) Task set A320-A-25-XX-1BPV-01000-93AA-A Replacement of the Bin in the
Pivoting Overhead Stowage Compartment

PREPARATION

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 7
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
Job Set-up 0.25 h
PROCEDURE
Replace the Bin of the Pivoting Overhead Stowage 29.00 h
Compartment (OHSC)
Reidentify the Overhead Stowage Compartment 3.00 h
Assemblies
PREPARATION FOR TEST
None
TEST
Operational Test 3.00 h
CLOSE-UP
Close-up 0.25 h
TOTAL MAN-HOURS 35.50 h
ELAPSED TIME (HOURS) 21.00 h
H. WEIGHT AND BALANCE
The weight and balance estimates given in this Service Bulletin are based on the
Manufacturer's Empty Weight (MEW) and do not include operator's items. The definition of
MEW and operator's items is given in the Weight and Balance Manual (WBM), Ref. WBM.
Manufacturer's Empty Weight +41.5 kg (+91.491 lb)
Effect on Balance +962.7 kg.m (+6963.209 lb.ft)
I. ELECTRICAL LOAD DATA
Not changed
J. REFERENCES

CONCURRENT SERVICE BULLETIN (SB)


A320-25-1BPW

(1) Replacement of the Bin in the Pivoting Overhead Stowage Compartment


(a) Task set A320-A-25-XX-1BPV-01000-93AA-A Replacement of the Bin in the
Pivoting Overhead Stowage Compartment

AIRCRAFT MAINTENANCE MANUAL (AMM)


06-20-00, Page Block 001 Task 12-34-24-869-802
Task 24-42-00-861-001 Task 25-24-00-710-002
Task 25-24-41-000-802
Task 25-24-41-400-802

ELECTRICAL STANDARD PRACTICES MANUAL (ESPM)


20-55-00
WEIGHT AND BALANCE MANUAL (WBM)
STANDARDS MANUAL (SM)
CONSUMABLE MATERIAL LIST (CML)
K. PUBLICATION AFFECTED

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 8
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
AIRCRAFT MAINTENANCE MANUAL (AMM)
ILLUSTRATED PART CATALOG (IPC)
L. INDUSTRY SUPPORT INFORMATION
AIRBUS will share the costs of accomplishment of this Service Bulletin by providing the kits
at no charge for orders placed before May 30/22.
AIRBUS will credit the man-hours indicated in this Service Bulletin at the agreed in-house
warranty labor rate for claims received no later than 90 days after completion of the last
affected aircraft of your fleet, for the accomplishment of this Service Bulletin before May
30/22.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 9
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
2. MATERIAL INFORMATION
A. MATERIAL APPLICABILITY
Material for task set A320-A-25-XX-1BPV-01000-93AA-A Replacement of the Bin in
the Pivoting Overhead Stowage Compartment

MATERIAL QTY SEE NOTES


Consumables See SB
Part kit 251BPVD01R03 1
Part kit 251BPVD05R01 1
Components See SB
Interchangeable parts See SB
Spare parts See SB
B. TOOLING
No tools
C. CONSUMABLES
Consumables for task set A320-A-25-XX-1BPV-01000-93AA-A Replacement of the
Bin in the Pivoting Overhead Stowage Compartment

ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES


Non Aqueous Cleaner -
08BAA9
General
14SBA1 Textile - Lint free Cotton
D. LIST OF NEW PARTS
Part kit 251BPVD01R03

Cost 539000.00 USD


Availability 150 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead-time for ordering purposes shall be
obtained through the AirbusSpares portal or through a request for quotation to
[email protected].
The availability given above is the standard lead-time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.

AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
Procurement address D4296
GERMANY
Phone: +49 40 743 51660
E-mail: [email protected]
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
Parts listed below can be delivered as a complete and certified kit from Airbus.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 10
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
They can be also delivered as single part items with single part certification directly
from the supplier.

ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES


E2529795000000 6 CMPRTMNT
E2529795000100 5 CMPRTMNT
E2529795000200 7 CMPRTMNT
E2529795000300 7 CMPRTMNT
E2529795000400 2 CMPRTMNT
E2529795000500 3 CMPRTMNT
E2529795000600 1 CMPRTMNT
E2529795000700 1 CMPRTMNT
E2529795000800 2 CMPRTMNT
E2529795000900 1 CMPRTMNT
E2529795001000 1 CMPRTMNT
E2529795001300 2 CMPRTMNT
E2529795001800 1 CMPRTMNT
E2529795300000 1 CMPRTMNT
E2529795300100 1 CMPRTMNT
E2529795600000 1 CMPRTMNT
E2529795600100 1 CMPRTMNT
E2529795700000 1 CMPRTMNT
E2529795700200 1 CMPRTMNT
E2529795700500 1 CMPRTMNT
E2529796300100 1 CMPRTMNT
E2529796500000 1 CMPRTMNT
E2529796500100 1 CMPRTMNT
E2529796600000 1 CMPRTMNT
E2529796600100 1 CMPRTMNT
E2529796600200 1 CMPRTMNT
E2529796600300 2 CMPRTMNT
E2529797000000 1 CMPRTMNT
E2529797000400 1 CMPRTMNT
E2529797000600 2 CMPRTMNT
Part kit 251BPVD05R01

Cost 60.00 USD


Availability 150 d (calendar days from receipt of order)
NOTE(S)
The sales terms (costs and availability) are estimated in relation to economic
conditions. The latest valid price and lead-time for ordering purposes shall be
obtained through the AirbusSpares portal or through a request for quotation to
[email protected].

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 11
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
The availability given above is the standard lead-time from the date of your purchase
order. If items are required before this time, please include a retrofit planning
schedule with your order so that we can try to comply with your requirements.

AIRBUS
Material, Logistics and Suppliers ATP II B,
Hein-Sass-Weg 24
21129 HAMBURG
Procurement address D4296
GERMANY
Phone: +49 40 743 51660
E-mail: [email protected]
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.
Parts listed below can be delivered as a complete and certified kit from Airbus.
They can be also delivered as single part items with single part certification directly
from the supplier.

ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES


2 NAS1801-08-5 216 SCREW
3 NAS1149CN832R 216 WASHER
NOTE(S)
Refer to the AIRBUS Ref. SM if you find part numbers of hardware components which
you cannot identify. The SM will give you the correct part number to part number
relationship.
Components for task set A320-A-25-XX-1BPV-01000-93AA-A Replacement of the
Bin in the Pivoting Overhead Stowage Compartment

AIRBUS Material, Logistics and Suppliers


Customer Order Fulfilment
Weg beim Jaeger 150
22335 HAMBURG
Procurement address D4296 GERMANY
Phone: +49 (0) 40 5076 4002
E-mail: Please contact your Single Point Of Contact
(SPOC)
Internet: http://spares.airbus.com
NOTE(S)
Customers with aircraft shown in the applicability of this Service Bulletin should send
a purchase order to AIRBUS at the address given above and quote the number of this
Service Bulletin.

ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES


606A00306-000
1 54 BRACKET (1)
(D4296)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 12
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
E. LIST OF EXISTING PARTS
Interchangeable parts for task set A320-A-25-XX-1BPV-01000-93AA-A
Replacement of the Bin in the Pivoting Overhead Stowage Compartment

DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
BRACKET 606A00305-000 606A00306-000 01 (1) (2)
BRACKET 606A00305-001 606A00306-000 01 (1) (2)
COMPARTMENT
E2529795100600 E2529795300000 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795100700 E2529795300100 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795200000 E2529795000000 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795200100 E2529795000100 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795200200 E2529795000200 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795200300 E2529795000300 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795200400 E2529795000400 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795200500 E2529795000500 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795200600 E2529795000600 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795200700 E2529795000700 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795200800 E2529795000800 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795200900 E2529795000900 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795201100 E2529795001000 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795201200 E2529795001300 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795201800 E2529795001800 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795400600 E2529795600000 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795400700 E2529795600100 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795500000 E2529795700000 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795500600 E2529795700200 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529795500700 E2529795700500 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529796000500 E2529796300100 01
ASSY-OVHD STWG

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 13
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
DESCRIPTION OLD PART No. NEW PART No. INT SEE NOTES
COMPARTMENT
E2529796100600 E2529796500000 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529796100700 E2529796500100 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529796200000 E2529796600000 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529796200100 E2529796600100 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529796200400 E2529796600200 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529796200500 E2529796600300 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529797200600 E2529797000000 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529797200600 E2529797000600 01 (1) (2)
ASSY-OVHD STWG
COMPARTMENT
E2529797201000 E2529797000400 01 (1) (2)
ASSY-OVHD STWG
NOTE(S)
For definitions of interchangeability codes in column INT. refer to ATA (CSDD Chapter
2).
Only the mixability configuration(s) and condition(s) stated in this Service Bulletin are
approved.
(1): An accomplishment Overhead Stowage Compartment (OHSC) per OHSC is
allowed leading to a mixed configuration until the Service Bulletin is completely
accomplished.
(2): The interchangeability possibilities are for new or modified parts introduced by the
accomplishment of this Service Bulletin.
Spare parts for task set A320-A-25-XX-1BPV-01000-93AA-A Replacement of the
Bin in the Pivoting Overhead Stowage Compartment

DESCRIPTION OLD PART No. SEE NOTES


BRACKET 606A00305-000 (1)
BRACKET 606A00305-001 (1)
COMPARTMENT ASSY-OVHD STWG E2529795100600 (1)
COMPARTMENT ASSY-OVHD STWG E2529795100700 (1)
COMPARTMENT ASSY-OVHD STWG E2529795200000 (1)
COMPARTMENT ASSY-OVHD STWG E2529795200100 (1)
COMPARTMENT ASSY-OVHD STWG E2529795200200 (1)
COMPARTMENT ASSY-OVHD STWG E2529795200300 (1)
COMPARTMENT ASSY-OVHD STWG E2529795200400 (1)
COMPARTMENT ASSY-OVHD STWG E2529795200500 (1)
COMPARTMENT ASSY-OVHD STWG E2529795200600 (1)
COMPARTMENT ASSY-OVHD STWG E2529795200700 (1)
COMPARTMENT ASSY-OVHD STWG E2529795200800 (1)
COMPARTMENT ASSY-OVHD STWG E2529795200900 (1)

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 14
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
DESCRIPTION OLD PART No. SEE NOTES
COMPARTMENT ASSY-OVHD STWG E2529795201100 (1)
COMPARTMENT ASSY-OVHD STWG E2529795201200 (1)
COMPARTMENT ASSY-OVHD STWG E2529795201800 (1)
COMPARTMENT ASSY-OVHD STWG E2529795400600 (1)
COMPARTMENT ASSY-OVHD STWG E2529795400700 (1)
COMPARTMENT ASSY-OVHD STWG E2529795500000 (1)
COMPARTMENT ASSY-OVHD STWG E2529795500600 (1)
COMPARTMENT ASSY-OVHD STWG E2529795500700 (1)
COMPARTMENT ASSY-OVHD STWG E2529796000500
COMPARTMENT ASSY-OVHD STWG E2529796100600 (1)
COMPARTMENT ASSY-OVHD STWG E2529796100700 (1)
COMPARTMENT ASSY-OVHD STWG E2529796200000 (1)
COMPARTMENT ASSY-OVHD STWG E2529796200100 (1)
COMPARTMENT ASSY-OVHD STWG E2529796200400 (1)
COMPARTMENT ASSY-OVHD STWG E2529796200500 (1)
COMPARTMENT ASSY-OVHD STWG E2529797200600 (1)
COMPARTMENT ASSY-OVHD STWG E2529797201000 (1)
NOTE(S)
(1): The parts listed here must not be installed anymore on aircraft which have
accomplished this Service Bulletin or which have the equivalent production
modification embodied.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 15
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
3. ACCOMPLISHMENT INSTRUCTIONS
Task set A320-A-25-XX-1BPV-01000-93AA-A
Replacement of the Bin in the Pivoting Overhead Stowage Compartment

WARNING: MAKE SURE THAT YOU OBEY ALL THE WARNINGS AND ALL THE CAUTIONS
INCLUDED IN THE REFERENCED PROCEDURES.

CAUTION: ALWAYS OBEY THE PRECAUTIONS THAT FOLLOW TO KEEP ELECTRICAL


WIRING IN A SATISFACTORY CONDITION (ELECTRICALLY AND MECHANICALLY
SERVICEABLE). WHEN YOU DO A MAINTENANCE WORK, REPAIRS OR
MODIFICATIONS, ALWAYS KEEP ELECTRICAL WIRING, COMPONENTS AND
THE WORK AREA AS CLEAN AS POSSIBLE. TO DO THIS:
- PUT PROTECTION, SUCH AS PLASTIC SHEETING, CLOTHS, ETC., AS
NECESSARY ON WIRING AND COMPONENTS.
- REGULARLY REMOVE ALL SHAVINGS, UNWANTED MATERIAL AND
OTHER CONTAMINATION.
THESE PRECAUTIONS WILL DECREASE THE RISK OF CONTAMINATION AND
DAMAGE TO THE ELECTRICAL WIRING INSTALLATION.
IF THERE IS CONTAMINATION, REFER TO Ref. ESPM 20-55-00.

NOTE: The accomplishment instructions of this Service Bulletin include procedures given in
other documents or in other sections of the Service Bulletin. When the words “refer to”
are used and the operator has a procedure accepted by the local authority he belongs to,
the accepted alternative procedure can be used. When the words “in accordance with”
are used then the given procedure must be followed.

NOTE: The access and close-up instructions, not comprising return to service tests, in this
Service Bulletin do not constitute or affect the technical intent of the Service Bulletin.
Operators can therefore, as deemed necessary, omit or add access and/or close-up steps
to add flexibility to their maintenance operations as long as the technical intent of the
Service Bulletin is met within the set parameters.

NOTE: Manual titles given in the accomplishment instructions are referred to by acronyms. Refer
to paragraph 1.J., References, for the definition of acronyms.

NOTE: Discarded parts must be managed at the operator's discretion.

A. TASK SET ASSOCIATED INFORMATION


Task Manpower
TOTAL MAN-HOURS 35.50 h
ELAPSED TIME (HOURS) 21.00 h
B. PREPARATION
(1) Task A320-A-25-XX-1BPV-01001-540A-A - Job Set-up
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Skills Utility

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 16
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
Referenced Information

Manuals/Drawings References/Sheets
Task 12-34-24-869-802
AMM
Task 24-42-00-861-001
Procedure

NOTE: For the basic Aircraft configuration, refer to AMM Chapter “Introduction -
Aircraft status for maintenance" in Manual Front Matter section.

(a) Make sure that the aircraft is electrically grounded, refer to Ref. AMM Task
12-34-24-869-802.
(b) Energize the ground service network, refer to Ref. AMM Task 24-42-00-861-001.
(c) Make sure that the bin of the Overhead Stowage Compartment (OHSC) is empty.
If necessary:
- Remove, identify and retain any installed equipment.
- Remove, identify and retain any attachment assemblies from the bin.

NOTE: Items will be re-installed in the new bins.

C. PROCEDURE
(1) Task A320-A-25-XX-1BPV-01001-920A-A - Replace the Bin of the Pivoting
Overhead Stowage Compartment (OHSC)
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 29.00 h
Minimum Number of person 3
Elapsed Time 14.50 h
Skills Cabin
Material necessary to do the job

Consumables
ITEM REFERENCE CML DESCRIPTION DRAWING SEE NOTES
Non Aqueous Cleaner -
08BAA9
General
14SBA1 Textile - Lint free Cotton

Part kit 251BPVD01R03


ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E2529795000000 6 CMPRTMNT
E2529795000100 5 CMPRTMNT
E2529795000200 7 CMPRTMNT
E2529795000300 7 CMPRTMNT
E2529795000400 2 CMPRTMNT
E2529795000500 3 CMPRTMNT
E2529795000600 1 CMPRTMNT
E2529795000700 1 CMPRTMNT

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 17
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
Part kit 251BPVD01R03
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
E2529795000800 2 CMPRTMNT
E2529795000900 1 CMPRTMNT
E2529795001000 1 CMPRTMNT
E2529795001300 2 CMPRTMNT
E2529795001800 1 CMPRTMNT
E2529795300000 1 CMPRTMNT
E2529795300100 1 CMPRTMNT
E2529795600000 1 CMPRTMNT
E2529795600100 1 CMPRTMNT
E2529795700000 1 CMPRTMNT
E2529795700200 1 CMPRTMNT
E2529795700500 1 CMPRTMNT
E2529796300100 1 CMPRTMNT
E2529796500000 1 CMPRTMNT
E2529796500100 1 CMPRTMNT
E2529796600000 1 CMPRTMNT
E2529796600100 1 CMPRTMNT
E2529796600200 1 CMPRTMNT
E2529796600300 2 CMPRTMNT
E2529797000000 1 CMPRTMNT
E2529797000400 1 CMPRTMNT
E2529797000600 2 CMPRTMNT

Part kit 251BPVD05R01


ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
2 NAS1801-08-5 216 SCREW
3 NAS1149CN832R 216 WASHER

Components
ITEM PART No. QTY (UM) KEYWORD DRAWING SEE NOTES
1 606A00306-000 54 BRACKET (1)
NOTE(S)
(1): The components listed above are not an AIRBUS Kit, the required parts must be
ordered as necessary through the given channel.
Referenced Information

Manuals/Drawings References/Sheets
06-20-00, Page Block 001
AMM Task 25-24-41-000-802
Task 25-24-41-400-802
CML CONSUMABLE MATERIAL LIST (CML)
Procedure

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 18
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
(a) Standard Practices
1 For the removal of the bin, refer to Ref. AMM Task 25-24-41-000-802.
2 For the installation of the bin, refer to Ref. AMM Task 25-24-41-400-802.
3 For the specification of Material application codes, refer to Ref. CML.
4 For the identification of zones, refer to Ref. AMM 06-20-00, Page Block 001.
5 For a typical installation of the bin, refer to Ref. Fig. Bin Installation - Typical
6 For the replacement of the X-Fixation bracket, refer to Ref. Fig. Fixation
Bracket Replacement.
(b) Replace bin assembly 1F FL EE
1 Remove:

1 COMPARTMENT ASSY- E2529795100600 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-000 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529795300000


OVHD STWG
(c) Replace bin assembly 1F FR EE

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 19
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
1 Remove:

1 COMPARTMENT ASSY- E2529795100700 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-001 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529795300100


OVHD STWG
(d) Replace bin assembly 2F AL ST
1 Remove:

6 COMPARTMENT ASSY- E2529795200000 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

24 SCREW Item (2) Discard

24 WASHER Item (3) Discard

6 BRACKET 606A00305-000 Item (1) Discard

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 20
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

6 BRACKET 606A00306-000 Item 1

24 WASHER NAS1149CN832R Item 3

24 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

6 COMPARTMENT ASSY- E2529795000000


OVHD STWG
(e) Replace bin assembly 2F AR STD
1 Remove:

5 COMPARTMENT ASSY- E2529795200100 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

20 SCREW Item (2) Discard

20 WASHER Item (3) Discard

5 BRACKET 606A00305-001 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

5 BRACKET 606A00306-000 Item 1

20 WASHER NAS1149CN832R Item 3

20 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 21
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

5 COMPARTMENT ASSY- E2529795000100


OVHD STWG
(f) Replace bin assembly 2F FL ST
1 Remove:

7 COMPARTMENT ASSY- E2529795200200 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

28 SCREW Item (2) Discard

28 WASHER Item (3) Discard

7 BRACKET 606A00305-000 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

7 BRACKET 606A00306-000 Item 1

28 WASHER NAS1149CN832R Item 3

28 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

7 COMPARTMENT ASSY- E2529795000200


OVHD STWG
(g) Replace bin assembly 2F FR STD

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 22
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
1 Remove:

7 COMPARTMENT ASSY- E2529795200300 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

28 SCREW Item (2) Discard

28 WASHER Item (3) Discard

7 BRACKET 606A00305-001 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

7 BRACKET 606A00306-000 Item 1

28 WASHER NAS1149CN832R Item 3

28 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

7 COMPARTMENT ASSY- E2529795000300


OVHD STWG
(h) Replace bin assembly 2F AL EE
1 Remove:

2 COMPARTMENT ASSY- E2529795200400 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

8 SCREW Item (2) Discard

8 WASHER Item (3) Discard

2 BRACKET 606A00305-000 Item (1) Discard

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 23
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

2 BRACKET 606A00306-000 Item 1

8 WASHER NAS1149CN832R Item 3

8 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

2 COMPARTMENT ASSY- E2529795000400


OVHD STWG
(i) Replace bin assembly 2F AR EE
1 Remove:

3 COMPARTMENT ASSY- E2529795200500 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

12 SCREW Item (2) Discard

12 WASHER Item (3) Discard

3 BRACKET 606A00305-001 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

3 BRACKET 606A00306-000 Item 1

12 WASHER NAS1149CN832R Item 3

12 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 24
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

3 COMPARTMENT ASSY- E2529795000500


OVHD STWG
(j) Replace bin assembly 2F FL EE
1 Remove:

1 COMPARTMENT ASSY- E2529795200600 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-000 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529795000600


OVHD STWG
(k) Replace bin assembly 2F FR EE

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 25
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
1 Remove:

1 COMPARTMENT ASSY- E2529795200700 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-001 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529795000700


OVHD STWG
(l) Replace bin assembly 2F LH SYM
1 Remove:

2 COMPARTMENT ASSY- E2529795200800 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

8 SCREW Item (2) Discard

8 WASHER Item (3) Discard

2 BRACKET 606A00305-000 Item (1) Discard

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 26
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

2 BRACKET 606A00306-000 Item 1

8 WASHER NAS1149CN832R Item 3

8 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

2 COMPARTMENT ASSY- E2529795000800


OVHD STWG
(m) Replace bin assembly 2F RH SYM
1 Remove:

1 COMPARTMENT ASSY- E2529795200900 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-001 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 27
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529795000900


OVHD STWG
(n) Replace bin assembly 2F LH 3FS
1 Remove:

1 COMPARTMENT ASSY- E2529795201100 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-000 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529795001000


OVHD STWG
(o) Replace bin assembly 2F AR MCU

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 28
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
1 Remove:

2 COMPARTMENT ASSY- E2529795201200 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

8 SCREW Item (2) Discard

8 WASHER Item (3) Discard

2 BRACKET 606A00305-001 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

2 BRACKET 606A00306-000 Item 1

8 WASHER NAS1149CN832R Item 3

8 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

2 COMPARTMENT ASSY- E2529795001300


OVHD STWG
(p) Replace bin assembly 2F AL LOCK
1 Remove:

1 COMPARTMENT ASSY- E2529795201800 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-000 Item (1) Discard

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 29
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529795001800


OVHD STWG
(q) Replace bin assembly 2FP FL EE
1 Remove:

1 COMPARTMENT ASSY- E2529795400600 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-000 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 30
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529795600000


OVHD STWG
(r) Replace bin assembly 2FP FR EE
1 Remove:

1 COMPARTMENT ASSY- E2529795400700 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-001 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529795600100


OVHD STWG
(s) Replace bin assembly US1 AL STD

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 31
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
1 Remove:

1 COMPARTMENT ASSY- E2529795500000 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-000 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529795700000


OVHD STWG
(t) Replace bin assembly US3 FL EE
1 Remove:

1 COMPARTMENT ASSY- E2529795500600 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-001 Item (1) Discard

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 32
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529795700200


OVHD STWG
(u) Replace bin assembly US4 FR EE
1 Remove:

1 COMPARTMENT ASSY- E2529795500700 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-001 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 33
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529795700500


OVHD STWG
(v) Replace bin assembly 1FPC RH EE
1 Remove:

1 COMPARTMENT ASSY- E2529796000500 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-001 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529796300100


OVHD STWG
(w) Replace bin assembly 1FC LH

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 34
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
1 Remove:

1 COMPARTMENT ASSY- E2529796100600 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-000 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529796500000


OVHD STWG
(x) Replace bin assembly 1FC EE RH
1 Remove:

1 COMPARTMENT ASSY- E2529796100700 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-001 Item (1) Discard

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 35
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529796500100


OVHD STWG
(y) Replace bin assembly 2FC LH STD
1 Remove:

1 COMPARTMENT ASSY- E2529796200000 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-000 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 36
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529796600000


OVHD STWG
(z) Replace bin assembly 2FC RH STD
1 Remove:

1 COMPARTMENT ASSY- E2529796200100 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-001 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529796600100


OVHD STWG
(aa) Replace bin assembly 2FC LH EE

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 37
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
1 Remove:

1 COMPARTMENT ASSY- E2529796200400 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

4 SCREW Item (2) Discard

4 WASHER Item (3) Discard

1 BRACKET 606A00305-000 Item (1) Discard


b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

1 BRACKET 606A00306-000 Item 1

4 WASHER NAS1149CN832R Item 3

4 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

1 COMPARTMENT ASSY- E2529796600200


OVHD STWG
(ab) Replace bin assembly 2FC RH EE
1 Remove:

2 COMPARTMENT ASSY- E2529796200500 Discard


OVHD STWG
2 Replace the X-fixation bracket in the housing.
a Remove:

8 SCREW Item (2) Discard

8 WASHER Item (3) Discard

2 BRACKET 606A00305-001 Item (1) Discard

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 38
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
b Clean the work area with:

Non Aqueous Cleaner - 08BAA9


General
and

Textile - Lint free Cotton 14SBA1


c Install:

2 BRACKET 606A00306-000 Item 1

8 WASHER NAS1149CN832R Item 3

8 SCREW NAS1801-08-5 Item 2


3 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
4 Install:

2 COMPARTMENT ASSY- E2529796600300


OVHD STWG
(ac) Replace bin assembly 2FR LH EE
1 Remove:

1 COMPARTMENT ASSY- E2529797200600 Discard


OVHD STWG
2 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
3 Install:

1 COMPARTMENT ASSY- E2529797000000


OVHD STWG
(ad) Replace bin assembly 2FRS EE
1 Remove:

1 COMPARTMENT ASSY- E2529797201000 Discard


OVHD STWG
2 Reidentify the OHSC housing.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 39
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
3 Install:

1 COMPARTMENT ASSY- E2529797000400


OVHD STWG
(ae) Replace bin assembly 2FR EE STIFF
1 Remove:

2 COMPARTMENT ASSY- E2529797200600 Discard


OVHD STWG
2 Reidentify the OHSC housing.
a To find the correct PN for the placard to be installed, refer to Ref.
Appendix PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS


Material, Logistics and Suppliers, Customer Order Fulfilment.

b Install the OHSC housing placard, refer to Ref. Fig. Housing Placard
Location.
3 Install:

2 COMPARTMENT ASSY- E2529797000600


OVHD STWG

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 40
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
CONF 001

Z200

A
TYPICAL

B
TYPICAL

ICN-A320-A-25XX1BPV-A-FAPE3-00YY4-A-001-01

Figure ICN-A320-A-25XX1BPV-A-FAPE3-00YY4-A-001-01 SHEET 1/1


REV 00 May 27/19 A320-25-1BPV
Bin Installation - Typical
REV 01 Jun 27/19 Page 41
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
CONF 001

Z200

A
TYPICAL

C D

B
TYPICAL
C D
VIEW SHOWN WITHOUT BINS
ICN-A320-A-25XX1BPV-A-FAPE3-01AOL-A-001-01

Figure ICN-A320-A-25XX1BPV-A-FAPE3-01AOL-A-001-01 SHEET 1/2


REV 00 May 27/19 A320-25-1BPV
Fixation Bracket Replacement
REV 01 Jun 27/19 Page 42
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
CONF 001

BEFORE

(1)

(3)
(2)
C
TYPICAL

AFTER

3
2
D
TYPICAL

ICN-A320-A-25XX1BPV-A-FAPE3-01AOV-A-002-01

Figure ICN-A320-A-25XX1BPV-A-FAPE3-01AOV-A-002-01 SHEET 2/2


REV 00 May 27/19 A320-25-1BPV
Fixation Bracket Replacement
REV 01 Jun 27/19 Page 43
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
CONF 001

Z200

A
TYPICAL

01

SB25-1BPV IMPLEMENTED
02 03
NEW P/N: E25297XXXXXXXX

B
TYPICAL
VIEW SHOWN WITHOUT BINS

NOTE:
01 MAKE EXISTING P/N UNREADABLE
02 BOND SB-PLACARD NEAR TO EXISTING IDENTIFICATION PLACARD
03 REFER TO TABLE ON APPENDIX FOR AFFECTED PART NUMBER
ICN-A320-A-25XX1BPV-A-FAPE3-01HXF-A-001-01

Figure ICN-A320-A-25XX1BPV-A-FAPE3-01HXF-A-001-01 SHEET 1/1


REV 00 May 27/19 A320-25-1BPV
Housing Placard Location
REV 01 Jun 27/19 Page 44
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
(2) Task A320-A-25-XX-1BPV-01001-900A-A - Reidentify the Overhead Stowage
Compartment Assemblies
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 3.00 h
Minimum Number of person 1
Elapsed Time 3.00 h
Skills Cabin

Procedure
(a) Reidentify the OHSC assembly.
1 To find the correct PN for the placard to be installed, refer to Ref. Appendix
PART NUMBER ROLL INFORMATION.

NOTE: Placards shall be ordered as necessary through AIRBUS Material,


Logistics and Suppliers, Customer Order Fulfilment.

2 Install the OHSC assembly placard, refer to Ref. Fig. OHSC Assembly
Placard Location.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 45
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
CONF 001

Z200

A
TYPICAL

B
01 TYPICAL

SB25-1BPV IMPLEMENTED
02 03
NEW P/N: E25294XXXXXXXX
C
NOTE:
01 MAKE EXISTING P/N UNREADABLE
02 BOND SB-PLACARD NEAR TO EXISTING IDENTIFICATION PLACARD
03 REFER TO TABLE ON APPENDIX FOR AFFECTED PART NUMBER
ICN-A320-A-25XX1BPV-A-FAPE3-01DPM-A-001-01

Figure ICN-A320-A-25XX1BPV-A-FAPE3-01DPM-A-001-01 SHEET 1/1


REV 00 May 27/19 A320-25-1BPV
OHSC Assembly Placard Location
REV 01 Jun 27/19 Page 46
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001
D. PREPARATION FOR TEST
None
E. TEST
(1) Task A320-A-25-XX-1BPV-01001-320A-A - Operational Test
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 3.00 h
Minimum Number of person 1
Elapsed Time 3.00 h
Skills Cabin

Referenced Information

Manuals/Drawings References/Sheets
AMM Task 25-24-00-710-002
Procedure
(a) Open and close the bin to check the correct operation.
(b) If necessary do the adjustment of the bin, refer to Ref. AMM Task
25-24-00-710-002.
F. CLOSE-UP
(1) Task A320-A-25-XX-1BPV-01001-740A-A - Close-up
Job Set-Up Information
Manpower/Resources/Skills

Man-hours 0.25 h
Minimum Number of person 1
Elapsed Time 0.25 h
Skills Utility

Procedure
(a) Make sure that the OHSC bins are clean and clear of tools and other items of
equipment.
1 Open the OHSC bin.
2 Install, where necessary, the identified removed equipment in the OHSC
bin.
3 Close the OHSC bin.
(b) Put the aircraft back to its initial configuration.
G. ADMINISTRATIVE
(1) Task A320-A-25-XX-1BPV-01001-90AA-A - Administrative

Procedure
Confirm in the applicable aircraft records that you have completed all the work defined
in this Service Bulletin task set as required.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 47
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001 APPENDIX
APPENDIX
A. PART NUMBER ROLL INFORMATION
PART NUMBER ROLL INFORMATION
This Appendix gives information about the Part Number roll after accomplishment of this
Service Bulletin.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 48
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001 APPENDIX
CONF 001

PART NUMBER ROLL

OHSC NAME PRE PN TOP OHSC PRE PN TOP OHSC POST PN PLACARD PN PRE PN POST PN PLACARD PN
BEFORE SB25-1BPW AFTER SB25-1BPW TOP OHSC TOP OHSC HOUSING HOUSING HOUSING
TOP OHSC 4F E252-94000-000-00 D252-93571-000-00 E252-94000-006-00 D252-93646-000-00 E252-97904-018-00 E252-97924-010-00 D252-93648-044-00
TOP OHSC 4F E252-94000-002-00 D252-93571-002-00 E252-94000-008-00 D252-93646-002-00 E252-97905-000-00 E252-97925-000-00 D252-93648-060-00
TOP OHSC 4F E252-94001-000-00 D252-93571-006-00 E252-94001-006-00 D252-93646-006-00 E252-97914-000-00 E252-97934-000-00 D252-93648-108-00
TOP OHSC 4F E252-94001-002-00 D252-93571-008-00 E252-94001-012-00 D252-93646-008-00 E252-97915-000-00 E252-97935-000-00 D252-93648-146-00
TOP OHSC 4F E252-94002-002-00 D252-93571-020-00 E252-94002-024-00 D252-93646-020-00 E252-97904-000-00 E252-97924-000-00 D252-93648-024-00
TOP OHSC 4F E252-94002-004-00 D252-93571-022-00 E252-94002-026-00 D252-93646-022-00 E252-97904-000-00 E252-97924-000-00 D252-93648-024-00
TOP OHSC 4F TS E252-94003-002-00 D252-93571-036-00 E252-94003-020-00 D252-93646-034-00 E252-97914-015-00 E252-97934-012-00 D252-93648-130-00
TOP OHSC 4F TS E252-94003-004-00 D252-93571-038-00 E252-94003-022-00 D252-93646-036-00 E252-97914-015-00 E252-97934-012-00 D252-93648-130-00
TOP OHSC 4F E252-94014-002-00 D252-93571-102-00 E252-94014-020-00 D252-93646-094-00 E252-97904-021-00 E252-97924-012-00 D252-93648-048-00
TOP OHSC 4F E252-94014-004-00 D252-93571-104-00 E252-94014-032-00 D252-93646-096-00 E252-97904-021-00 E252-97924-012-00 D252-93648-048-00
TOP OHSC 4F TS E252-94015-002-00 D252-93571-118-00 E252-94015-020-00 D252-93646-110-00 E252-97914-026-00 E252-97934-017-00 D252-93648-136-00
TOP OHSC 4F TS E252-94015-004-00 D252-93571-120-00 E252-94015-022-00 D252-93646-112-00 E252-97914-026-00 E252-97934-017-00 D252-93648-136-00
TOP OHSC 4F E252-94016-002-00 D252-93571-132-00 E252-94016-010-00 D252-93646-124-00 E252-97904-024-00 E252-97924-013-00 D252-93648-050-00
TOP OHSC 4F E252-94016-004-00 D252-93571-134-00 E252-94016-012-00 D252-93646-126-00 E252-97904-024-00 E252-97924-013-00 D252-93648-050-00
TOP OHSC 4F E252-94017-002-00 D252-93571-138-00 E252-94017-018-00 D252-93646-130-00 E252-97914-024-00 E252-97934-015-00 D252-93648-132-00
TOP OHSC 4F E252-94017-004-00 D252-93571-140-00 E252-94017-020-00 D252-93646-132-00 E252-97914-024-00 E252-97934-015-00 D252-93648-132-00
TOP OHSC 4F E252-94018-000-00 D252-93571-150-00 E252-94018-012-00 D252-93646-142-00 E252-97904-008-00 E252-97924-006-00 D252-93648-036-00
TOP OHSC 4F E252-94018-002-00 D252-93571-152-00 E252-94018-018-00 D252-93646-144-00 E252-97904-008-00 E252-97924-006-00 D252-93648-036-00
TOP OHSC 4F E252-94018-004-00 D252-93571-154-00 E252-94018-020-00 D252-93646-146-00 E252-97904-008-00 E252-97924-006-00 D252-93648-036-00
TOP OHSC 4F E252-94019-000-00 D252-93571-162-00 E252-94019-010-00 D252-93646-152-00 E252-97914-027-00 E252-97934-018-00 D252-93648-138-00
TOP OHSC 4F E252-94019-002-00 D252-93571-164-00 E252-94019-012-00 D252-93646-154-00 E252-97914-027-00 E252-97934-018-00 D252-93648-138-00
TOP OHSC 4F E252-94020-002-00 D252-93571-174-00 E252-94020-018-00 D252-93646-160-00 E252-97904-031-00 E252-97924-016-00 D252-93648-056-00
TOP OHSC 4F E252-94020-004-00 D252-93571-176-00 E252-94020-020-00 D252-93646-162-00 E252-97904-016-00 E252-97924-008-00 D252-93648-040-00
TOP OHSC 4F E252-94021-002-00 D252-93571-188-00 E252-94021-018-00 D252-93646-170-00 E252-97914-008-00 E252-97934-008-00 D252-93648-122-00
TOP OHSC 4F E252-94021-004-00 D252-93571-190-00 E252-94021-020-00 D252-93646-172-00 E252-97914-008-00 E252-97934-008-00 D252-93648-122-00
TOP OHSC 4F E252-94022-002-00 D252-93572-002-00 E252-94022-020-00 D252-93646-180-00 E252-97904-010-00 E252-97924-007-00 D252-93648-038-00
TOP OHSC 4F E252-94022-004-00 D252-93572-004-00 E252-94022-022-00 D252-93646-182-00 E252-97904-037-00 E252-97924-017-00 D252-93648-058-00
TOP OHSC 4F E252-94022-006-00 D252-93572-006-00 E252-94022-024-00 D252-93646-184-00 E252-97904-037-00 E252-97924-017-00 D252-93648-058-00
TOP OHSC 4F E252-94023-002-00 D252-93572-018-00 E252-94023-020-00 D252-93646-192-00 E252-97914-010-00 E252-97934-009-00 D252-93648-124-00
TOP OHSC 4F E252-94023-004-00 D252-93572-020-00 E252-94023-022-00 D252-93646-194-00 E252-97914-037-00 E252-97934-022-00 D252-93648-144-00
TOP OHSC 4F E252-94023-006-00 D252-93572-022-00 E252-94023-024-00 D252-93646-196-00 E252-97914-037-00 E252-97934-022-00 D252-93648-144-00
TOP OHSC 4F E252-94024-000-00 D252-93572-032-00 E252-94024-008-00 D252-93647-004-00 E252-97906-000-00 E252-97926-000-00 D252-93648-064-00

ICN-A320-A-25XX1BPV-A-FAPE3-01DPJ-A-002-01

Figure ICN-A320-A-25XX1BPV-A-FAPE3-01DPJ-A-002-01 SHEET 1/3


REV 00 May 27/19 A320-25-1BPV
Part Number Roll Information
REV 01 Jun 27/19 Page 49
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001 APPENDIX
CONF 001

PART NUMBER ROLL

OHSC NAME PRE PN TOP OHSC PRE PN TOP OHSC POST PN PLACARD PN PRE PN POST PN PLACARD PN
BEFORE SB25-1BPW AFTER SB25-1BPW TOP OHSC TOP OHSC HOUSING HOUSING HOUSING
TOP OHSC 4F E252-94024-002-00 D252-93572-034-00 E252-94024-010-00 D252-93647-006-00 E252-97906-000-00 E252-97926-000-00 D252-93648-064-00
TOP OHSC 4F E252-94025-000-00 D252-93572-040-00 E252-94025-008-00 D252-93647-010-00 E252-97916-000-00 E252-97936-000-00 D252-93648-152-00
TOP OHSC 4F E252-94025-002-00 D252-93572-042-00 E252-94025-010-00 D252-93647-012-00 E252-97916-000-00 E252-97936-000-00 D252-93648-152-00
TOP OHSC 4F E252-94026-004-00 D252-93572-050-00 E252-94026-020-00 D252-93647-016-00 E252-97904-017-00 E252-97924-009-00 D252-93648-042-00
TOP OHSC 4F E252-94027-002-00 D252-93572-062-00 E252-94027-018-00 D252-93647-024-00 E252-97914-014-00 E252-97934-011-00 D252-93648-128-00
TOP OHSC 4F E252-94027-004-00 D252-93572-064-00 E252-94027-020-00 D252-93647-026-00 E252-97914-014-00 E252-97934-011-00 D252-93648-128-00
TOP OHSC 4F E252-94028-002-00 D252-93572-076-00 E252-94028-022-00 D252-93647-034-00 E252-97904-020-00 E252-97924-011-00 D252-93648-046-00
TOP OHSC 4F E252-94028-004-00 D252-93572-078-00 E252-94028-024-00 D252-93647-036-00 E252-97904-020-00 E252-97924-011-00 D252-93648-046-00
TOP OHSC 4F E252-94029-002-00 D252-93572-090-00 E252-94029-020-00 D252-93647-044-00 E252-97914-002-00 E252-97934-002-00 D252-93648-112-00
TOP OHSC 4F E252-94029-004-00 D252-93572-092-00 E252-94029-022-00 D252-93647-046-00 E252-97914-002-00 E252-97934-002-00 D252-93648-112-00
TOP OHSC 3FC E252-94048-002-00 D252-93572-136-00 E252-94048-020-00 D252-93647-076-00 E252-97903-000-00 E252-97923-000-00 D252-93648-012-00
TOP OHSC 3FC E252-94048-004-00 D252-93572-138-00 E252-94048-022-00 D252-93647-078-00 E252-97903-034-00 E252-97923-004-00 D252-93648-020-00
TOP OHSC 3FC E252-94048-006-00 D252-93572-140-00 E252-94048-024-00 D252-93647-080-00 E252-97903-035-00 E252-97923-005-00 D252-93648-022-00
TOP OHSC 3FC E252-94049-002-00 D252-93572-150-00 E252-94049-016-00 D252-93647-090-00 E252-97913-003-00 E252-97933-001-00 D252-93648-102-00
TOP OHSC 3FC E252-94049-004-00 D252-93572-152-00 E252-94049-018-00 D252-93647-092-00 E252-97913-034-00 E252-97933-003-00 D252-93648-106-00
TOP OHSC 2FC UP AIR E252-94052-002-00 D252-93572-162-00 E252-94052-010-00 D252-93647-100-00 E252-97907-004-00 E252-97927-001-00 D252-93648-070-00
TOP OHSC 2FC UP AIR E252-94052-004-00 D252-93572-164-00 E252-94052-012-00 D252-93647-102-00 E252-97907-004-00 E252-97927-001-00 D252-93648-070-00
TOP OHSC 2FC UP AIR E252-94053-002-00 D252-93572-170-00 E252-94053-012-00 D252-93647-106-00 E252-97917-004-00 E252-97937-001-00 D252-93648-158-00
TOP OHSC 2FC UP AIR E252-94053-004-00 D252-93572-172-00 E252-94053-014-00 D252-93647-108-00 E252-97917-004-00 E252-97937-001-00 D252-93648-158-00
TOP OHSC 2FR E252-94054-000-00 D252-93572-176-00 E252-94054-004-00 D252-93647-112-00 E252-97908-000-00 E252-97928-000-00 D252-93648-076-00
TOP OHSC 2FR E252-94054-002-00 D252-93572-178-00 E252-94054-006-00 D252-93647-114-00 E252-97908-000-00 E252-97928-000-00 D252-93648-076-00
TOP OHSC 2FR E252-94055-000-00 D252-93572-182-00 E252-94055-006-00 D252-93647-116-00 E252-97918-000-00 E252-97938-000-00 D252-93648-164-00
TOP OHSC 2FR E252-94055-002-00 D252-93572-184-00 E252-94055-008-00 D252-93647-118-00 E252-97918-000-00 E252-97938-000-00 D252-93648-164-00
TOP OHSC 2FC E252-94056-000-00 D252-93572-188-00 E252-94056-004-00 D252-93647-122-00 E252-97907-000-00 E252-97927-000-00 D252-93648-068-00
TOP OHSC 2FC E252-94056-002-00 D252-93572-190-00 E252-94056-006-00 D252-93647-124-00 E252-97907-000-00 E252-97927-000-00 D252-93648-068-00
TOP OHSC 2FC E252-94057-000-00 D252-93572-192-00 E252-94057-004-00 D252-93647-126-00 E252-97917-000-00 E252-97937-000-00 D252-93648-156-00
TOP OHSC 2FC E252-94057-002-00 D252-93572-194-00 E252-94057-006-00 D252-93647-128-00 E252-97917-000-00 E252-97937-000-00 D252-93648-156-00
TOP OHSC 2F E252-94058-002-00 D252-93572-198-00 E252-94058-010-00 D252-93647-130-00 E252-97902-000-00 E252-97920-000-00 D252-93648-004-00
TOP OHSC 2F E252-94058-004-00 D252-93573-000-00 E252-94058-012-00 D252-93647-132-00 E252-97902-000-00 E252-97920-000-00 D252-93648-004-00
TOP OHSC 2F E252-94059-002-00 D252-93573-006-00 E252-94059-010-00 D252-93647-136-00 E252-97912-000-00 E252-97930-000-00 D252-93648-094-00
TOP OHSC 2F E252-94059-004-00 D252-93573-008-00 E252-94059-012-00 D252-93647-138-00 E252-97912-000-00 E252-97930-000-00 D252-93648-094-00
TOP OHSC 2FC E252-94060-000-00 D252-93573-012-00 E252-94060-008-00 D252-93647-142-00 E252-97907-005-00 E252-97927-002-00 D252-93648-072-00

ICN-A320-A-25XX1BPV-A-FAPE3-01DPK-A-002-01

Figure ICN-A320-A-25XX1BPV-A-FAPE3-01DPK-A-002-01 SHEET 2/3


REV 00 May 27/19 A320-25-1BPV
Part Number Roll Information
REV 01 Jun 27/19 Page 50
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001 APPENDIX
CONF 001

PART NUMBER ROLL

OHSC NAME PRE PN TOP OHSC PRE PN TOP OHSC POST PN PLACARD PN PRE PN POST PN PLACARD PN
BEFORE SB25-1BPW AFTER SB25-1BPW TOP OHSC TOP OHSC HOUSING HOUSING HOUSING
TOP OHSC 2FC E252-94061-000-00 D252-93573-018-00 E252-94061-010-00 D252-93647-146-00 E252-97917-005-00 E252-97937-002-00 D252-93648-160-00
TOP OHSC 2FC E252-94061-002-00 D252-93573-020-00 E252-94061-014-00 D252-93647-148-00 E252-97917-005-00 E252-97937-002-00 D252-93648-160-00
TOP OHSC 2FR E252-94062-000-00 D252-93573-026-00 E252-94062-012-00 D252-93647-152-00 E252-97908-023-00 E252-97928-002-00 D252-93648-080-00
TOP OHSC 2FR E252-94062-002-00 D252-93573-028-00 E252-94062-016-00 D252-93647-154-00 E252-97908-003-00 E252-97928-001-00 D252-93648-078-00
TOP OHSC 2FR E252-94063-000-00 D252-93573-036-00 E252-94063-014-00 D252-93647-160-00 E252-97918-008-00 E252-97938-003-00 D252-93648-170-00
TOP OHSC 2FR E252-94063-002-00 D252-93573-038-00 E252-94063-016-00 D252-93647-162-00 E252-97018-008-00 E252-97938-003-00 D252-93648-170-00
TOP OHSC 1FC E252-94068-000-00 D252-93573-050-00 E252-94068-008-00 D252-93647-170-00 E252-97900-012-00 E252-97901-001-00 D252-93648-002-00
TOP OHSC 1FC E252-94068-002-00 D252-93573-052-00 E252-94068-010-00 D252-93647-172-00 E252-97900-012-00 E252-97901-001-00 D252-93648-002-00
TOP OHSC 1FC E252-94069-000-00 D252-93573-058-00 E252-94069-008-00 D252-93647-176-00 E252-97910-013-00 E252-97911-003-00 D252-93648-092-00
TOP OHSC 1FC E252-94069-002-00 D252-93573-060-00 E252-94069-010-00 D252-93647-178-00 E252-97910-013-00 E252-97911-003-00 D252-93648-092-00
TOP OHSC 3FM E252-94071-002-00 D252-93573-066-00 E252-94071-008-00 D252-93577-006-00 E252-97910-001-00 E252-97911-001-00 D252-93648-088-00
TOP OHSC 2F E252-94074-002-00 D252-93573-072-00 E252-94074-006-00 D252-93647-184-00 E252-97902-006-00 E252-97920-002-00 D252-93648-008-00
TOP OHSC 3FM E252-94076-002-00 D252-93573-078-00 E252-94076-006-00 D252-93647-188-00 E252-97905-011-00 E252-97925-001-00 D252-93648-062-00

ICN-A320-A-25XX1BPV-A-FAPE3-01DPL-A-003-01

Figure ICN-A320-A-25XX1BPV-A-FAPE3-01DPL-A-003-01 SHEET 3/3


REV 00 May 27/19 A320-25-1BPV
Part Number Roll Information
REV 01 Jun 27/19 Page 51
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001 APPENDIX
B. REPORTING SHEET

TITLE: EQUIPMENT/FURNISHINGS - OVERHEAD STOWAGE COMPARTMENTS -


REVISE BIN BASE FOR PIVOTING OHSC

MODIFICATION No.: 162563K30846


(1) SB Reporting status
This Service Bulletin will only be incorporated into affected customized Maintenance
and Flight Operations Products if it is duly reported to Airbus.
(2) GENERAL information
The SB Reporting policy is published in ISI 00.00.00135. This document provides
information regarding: the SB Reporting means and benefits, the update of
customized Maintenance Products and customized Flight Operations Products.
If this Service Bulletin has an operational impact, refer to paragraph "Flight Operations
Products" for further information on the update of affected Flight Operations Products.
(3) SB Reporting procedure
Standard practice to report SB is to use the online reporting application on
AirbusWorld.
Refer to ISI 00.00.00179:

- For complete information on reporting means to Airbus, Question 2 "What are


the standard practices for SB Reporting?"
- If this SB requires previous or simultaneous accomplishment of other SBs,
Question 3 "What about the reporting of prerequisite Service Bulletins?"

NOTE: ISI 00.00.00179 covers all the frequently asked questions about SB Reporting.
It is revised on a regular basis.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 52
A318/A319/A320/A321
SERVICE BULLETIN
CONFIG 001 APPENDIX
C. QUALITY PERCEPTION FORM
Use this form to tell us what is your perception of the quality of this Service Bulletin.
The reported data that you provide us will be used to analyse areas of difficulties and to
take corrective action to further improve the quality of our Service Bulletin.
We thank you for the time you have taken in completing this form.

Quality rating of this SB 4 3 2 1


Quality rating of the Accomplishment Instructions 4 3 2 1
Quality rating of the Illustrations 4 3 2 1
Is this SB easy to understand ? Y/N

NOTE: Please rate on a scale of 1 to 4, with 4 being the highest score

If you have difficulties in the accomplishment of this SB please quote below the area(s) and
give a short description of the issue.

Planning Material Instructions


X Applicability X Tooling X Preparation
X Reason X List of Materials X Mod/Inspection
Operator Supplied
X Manpower X Kit content X Test
X References X Re-identification X Close-up
X Publication X Illustrations
X Industry Support

Comments :

Operator : Date :
Name/Title
Please return this form to :
AIRBUS
2, ROND POINT EMILE DEWOITINE
31700 BLAGNAC
FRANCE
Or via your Resident Customer Support Office.

REV 00 May 27/19 A320-25-1BPV


REV 01 Jun 27/19 Page 53

You might also like