STB18NM60N, STF18NM60N, STI18NM60N

STP18NM60N, STW18NM60N
N-channel 600 V, 0.27 Ω, 13 A MDmesh™ II Power MOSFET
in TO-220, TO-220FP, TO-247, D²PAK and I²PAK

Features
VDSS RDS(on)
Order codes ID PW
(@Tjmax) max. 3
3 1
2
STB18NM60N 110 W 1
D²PAK
STF18NM60N 30 W TO-247
3
STI18NM60N 650 V < 0.285 Ω 13 A 12

STP18NM60N 110 W I²PAK

STW18NM60N
3
■ 100% avalanche tested 2
3
1
2
1
■ Low input capacitance and gate charge TO-220 TO-220FP
■ Low gate input resistance

Application Figure 1. Internal schematic diagram

Switching applications
$
Description
These devices are made using the second
generation of MDmesh™ technology. This
revolutionary Power MOSFET associates a new '
vertical structure to the company’s strip layout to
yield one of the world’s lowest on-resistance and
gate charge. It is therefore suitable for the most
demanding high efficiency converters. 3

!-V

Table 1. Device summary

Order codes Marking Package Packaging

STB18NM60N 18NM60N D²PAK Tape and reel

STF18NM60N 18NM60N TO-220FP Tube
STI18NM60N 18NM60N I²PAK Tube
STP18NM60N 18NM60N TO-220 Tube
STW18NM60N 18NM60N TO-247 Tube

October 2010 Doc ID 15868 Rev 3 1/18

www.st.com 18
Contents STB/F/I/P/W18NM60N

Contents

1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) ........................... 6

3 Test circuits ............................................... 9

4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2/18 Doc ID 15868 Rev 3

STB/F/I/P/W18NM60N Electrical ratings

1 Electrical ratings

Table 2. Absolute maximum ratings

Value
Symbol Parameter D²PAK,I²PAK Unit
TO-220FP
TO-220,TO-247

VDS Drain-source voltage (VGS =0) 600 V

VGS Gate- source voltage ± 25
ID Drain current (continuous) at TC = 25 °C 13 13 (1) A
ID Drain current (continuous) at TC = 100 °C 8.2 8.2 (1) A
IDM (2) Drain current (pulsed) 52 52 (1) A
PTOT Total dissipation at TC = 25 °C 110 30 W
Avalanche current, repetitive or not-repetitive
IAR 4.5 A
(pulse width limited by TJ max)
Single pulse avalanche energy
EAS 350 mJ
(starting TJ = 25 °C, ID = IAR, VDD = 50 V)
dv/dt(3) Peak diode recovery voltage slope 15 V/ns
Insulation withstand voltage (RMS) from all
VISO three leads to external heat sink 2500 V
(t=1 s;TC=25 °C)
TJ Operating junction temperature
-55 to 150 °C
Tstg Storage temperature
1. Limited only by maximum temperature allowed
2. Pulse width limited by safe operating area
3. ISD ≤ 13 A, di/dt ≤400 A/µs, peak VDS ≤V(BR)DSS

Table 3. Thermal data

Symbol Parameter D²PAK I²PAK TO-220 TO-247 TO-220FP Unit

Thermal resistance junction-case

Rthj-case 1.14 4.17 °C/W
max
Thermal resistance junction-amb
Rthj-amb 62.5 50 62.5 °C/W
max
Maximum lead temperature for
Tl 300 °C
soldering purpose

Doc ID 15868 Rev 3 3/18

Electrical characteristics STB/F/I/P/W18NM60N

2 Electrical characteristics

(TCASE=25 °C unless otherwise specified)

Table 4. On/off states

Symbol Parameter Test conditions Min. Typ. Max. Unit

Drain-source breakdown
V(BR)DSS ID = 1 mA, VGS= 0 600 V
voltage

Zero gate voltage drain VDS = Max rating 1 µA

IDSS
current (VGS = 0) VDS = Max rating,TJ=125 °C 10 µA
Gate body leakage current
IGSS VGS = ±25 V; VDS=0 100 nA
(VDS = 0)
VGS(th) Gate threshold voltage VDS= VGS, ID = 250 µA 2 3 4 V
Static drain-source on
RDS(on) VGS= 10 V, ID=6.5 A 0.260 0.285 Ω
resistance

Table 5. Dynamic
Symbol Parameter Test conditions Min. Typ. Max. Unit

Input capacitance
Ciss 1000 pF
Output capacitance VDS = 50 V, f =1 MHz,
Coss - 60 - pF
Reverse transfer VGS = 0
Crss 3 pF
capacitance
Output equivalent
Coss eq.(1) VDS = 0, to 480 V, VGS=0 - 225 - pF
capacitance
Rg Intrinsic resistance f=1 MHz open drain - 3.5 - Ω
Qg Total gate charge VDD = 480 V, ID = 13 A 35 nC
Qgs Gate-source charge VGS = 10 V - 6 - nC
Qgd Gate-drain charge (see Figure 18) 20 nC
1. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS
increases from 0 to 80% VDS.

Table 6. Switching times

Symbol Parameter Test conditions Min. Typ. Max. Unit

td(on) Turn-on delay time 20 ns

VDD = 300 V, ID = 13 A,
tr Rise time 22 ns
RG = 4.7 Ω, VGS = 10 V - -
td(off) Turn-off delay time 50 ns
(see Figure 17)
tf Fall time 40 ns

4/18 Doc ID 15868 Rev 3

STB/F/I/P/W18NM60N Electrical characteristics

Table 7. Source drain diode

Symbol Parameter Test conditions Min. Typ. Max. Unit

ISD Source-drain current 13 A

-
ISDM (1) Source-drain current (pulsed) 52 A
VSD(2) Forward on voltage ISD = 13 A, VGS=0 - 1.6 V
trr Reverse recovery time ISD =13 A, di/dt =100 A/µs, 300 ns
Qrr Reverse recovery charge VDD = 60 V - 4.0 µC
IRRM Reverse recovery current (see Figure 19) 25 A
trr Reverse recovery time VDD = 60 V 360 ns
Qrr Reverse recovery charge di/dt =100 A/µs, ISD = 13 A - 4.5 µC
IRRM Reverse recovery current Tj = 150°C (see Figure 19) 25 A
1. Pulse width limited by safe operating area
2. Pulsed: pulse duration = 300 µs, duty cycle 1.5%

Doc ID 15868 Rev 3 5/18

Electrical characteristics STB/F/I/P/W18NM60N

2.1 Electrical characteristics (curves)

Figure 2. Safe operating area for TO-220, Figure 3. Thermal impedance for TO-220,
D²PAK, I²PAK D²PAK, I²PAK
AM05525v1
ID
(A) is
a
)

10
x R re
on
ma is a
D S(

10µs
by in th
ite tion

100µs
Lim era
d
Op

1ms
1 Tj=150°C
Tc=25°C 10ms
Sinlge
pulse
0.1
0.1 1 10 100 VDS(V)

Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP
AM05526v1
ID
(A)

is
ea )
10 ar S(on
is
th RD 10µs
in x
o n ma
ti y 100µs
e ra d b
p e
O mit
1 Li 1ms

10ms
Tj=150°C
0.1 Tc=25°C
Sinlge
pulse
0.01
0.1 1 10 100 VDS(V)

Figure 6. Safe operating area for TO-247 Figure 7. Thermal impedance for TO-247
AM05527v1
ID
(A)
is
a
)
R e

10
on
ax ar

10µs
(
DS
m is
by in th

100µs
ite tion
Lim era
d
Op

1ms
1 Tj=150°C
Tc=25°C 10ms
Sinlge
pulse
0.1
0.1 1 10 100 VDS(V)

6/18 Doc ID 15868 Rev 3

STB/F/I/P/W18NM60N Electrical characteristics

Figure 8. Output characteristics Figure 9. Transfer characteristics

AM05528v1 AM05529v1
ID ID
(A) VGS=10V (A)
VDS=15V
25 25
6V
20 20

15 15

10 10
5V
5 5

4V
0 0
0 5 10 15 20 VDS(V) 0 2 4 6 8 10 VGS(V)

Figure 10. Static drain-source on resistance Figure 11. Gate charge vs gate-source voltage
RDS(on) AM05530v1 AM05531v1
VGS
(Ω) (V)
VDD=480V
0.28 12
ID=13A VGS 500
0.27
10
0.26 400
VDS
0.25 8
300
0.24 6
0.23 200
4
0.22
2 100
0.21
0.20 0 0
0 2 4 6 8 10 12 ID(A) 0 10 20 30 40 Qg(nC)

Figure 12. Capacitance variations Figure 13. Output capacitance stored energy
AM05532v1 AM05533v1
C Eoss
(pF) (µJ)
7

1000 Ciss 6

100 4

Coss 3

10 2

Crss 1
1 0
0.1 1 10 100 VDS(V) 0 100 200 300 400 500 600 VDS(V)

Doc ID 15868 Rev 3 7/18

Electrical characteristics STB/F/I/P/W18NM60N

Figure 14. Normalized gate threshold voltage Figure 15. Normalized on resistance vs
vs temperature temperature
VGS(th) AM05534v1 RDS(on) AM05535v1
(norm) (norm)
1.10 2.1

1.9

1.00 1.7

1.5
0.90 1.3

1.1
0.80 0.9
0.7
0.70 0.5
-50 -25 0 25 50 75 100 TJ(°C) -50 -25 0 25 50 75 100 TJ(°C)

Figure 16. Normalized BVDSS vs temperature

AM05536v1
BVDSS
(norm)
1.07

1.05

1.03

1.01

0.99

0.97

0.95

0.93
-50 -25 0 25 50 75 100 TJ(°C)

8/18 Doc ID 15868 Rev 3

STB/F/I/P/W18NM60N Test circuits

3 Test circuits

Figure 17. Switching times test circuit for Figure 18. Gate charge test circuit
resistive load
VDD

12V 47kΩ
1kΩ
100nF
RL 2200 3.3
μF μF
VDD IG=CONST
VD Vi=20V=VGMAX 100Ω D.U.T.
VGS 2200
RG D.U.T. μF 2.7kΩ VG

PW
47kΩ

PW 1kΩ
AM01468v1 AM01469v1

Figure 19. Test circuit for inductive load Figure 20. Unclamped inductive load test
switching and diode recovery times circuit

L
A A A
D
FAST L=100μH VD
G D.U.T. DIODE 2200 3.3
μF μF VDD
S B 3.3 1000
B B μF μF
25 Ω VDD ID
D

RG S
Vi D.U.T.

Pw
AM01470v1 AM01471v1

Figure 21. Unclamped inductive waveform Figure 22. Switching time waveform
V(BR)DSS ton toff
tr tdoff tf
VD tdon

90% 90%
IDM
10%
ID 10% VDS
0

VDD VDD 90%

VGS

AM01472v1 0 10% AM01473v1

Doc ID 15868 Rev 3 9/18

Package mechanical data STB/F/I/P/W18NM60N

4 Package mechanical data

In order to meet environmental requirements, ST offers these devices in different grades of

ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com. ECOPACK
is an ST trademark.

10/18 Doc ID 15868 Rev 3

STB/F/I/P/W18NM60N Package mechanical data

Table 8. TO-220FP mechanical data

mm
Dim.
Min. Typ. Max.

A 4.4 4.6
B 2.5 2.7
D 2.5 2.75
E 0.45 0.7
F 0.75 1
F1 1.15 1.70
F2 1.15 1.70
G 4.95 5.2
G1 2.4 2.7
H 10 10.4
L2 16
L3 28.6 30.6
L4 9.8 10.6
L5 2.9 3.6
L6 15.9 16.4
L7 9 9.3
Dia 3 3.2

Figure 23. TO-220FP drawing mechanical data

L7

A
B

D
Dia

L5
L6

F1 F2

H G
G1

L2 L4

L3
7012510_Rev_K

Doc ID 15868 Rev 3 11/18

Package mechanical data STB/F/I/P/W18NM60N

D2PAK (TO-263) mechanical data

mm in c h
Dim
Min Typ Max Min Typ Max
A 4.40 4.60 0.173 0.181
A1 0.03 0.23 0.001 0.009
b 0.70 0.93 0.027 0.037
b2 1.14 1.70 0.045 0.067
c 0.45 0.60 0.017 0.024
c2 1.23 1.36 0.048 0.053
D 8.95 9.35 0.352 0.368
D1 7.50 0.295
E 10 10.40 0.394 0.409
E1 8.50 0.334
e 2.54 0.1
e1 4.88 5.28 0.192 0.208
H 15 15.85 0.590 0.624
J1 2.49 2.69 0.099 0.106
L 2.29 2.79 0.090 0.110
L1 1.27 1.40 0.05 0.055
L2 1.30 1.75 0.051 0.069
R 0.4 0.016
V2 0° 8° 0° 8°

0079457_M

12/18 Doc ID 15868 Rev 3

STB/F/I/P/W18NM60N Package mechanical data

TO-220 type A mechanical data

mm
Dim
Min Typ Max
A 4.40 4.60
b 0.61 0.88
b1 1.14 1.70
c 0.48 0.70
D 15.25 15.75
D1 1.27
E 10 10.40
e 2.40 2.70
e1 4.95 5.15
F 1.23 1.32
H1 6.20 6.60
J1 2.40 2.72
L 13 14
L1 3.50 3.93
L20 16.40
L30 28.90
∅P 3.75 3.85
Q 2.65 2.95

0015988_Rev_S

Doc ID 15868 Rev 3 13/18

Package mechanical data STB/F/I/P/W18NM60N

TO-247 mechanical data

mm.
Dim.
Min. Typ. Max.
A 4.85 5.15
A1 2.20 2.60
b 1.0 1.40
b1 2.0 2.40
b2 3.0 3.40
c 0.40 0.80
D 19.85 20.15
E 15.45 15.75
e 5.45
L 14.20 14.80
L1 3.70 4.30
L2 18.50
øP 3.55 3.65
øR 4.50 5.50
S 5.50

14/18 Doc ID 15868 Rev 3

STB/F/I/P/W18NM60N Package mechanical data

I²PAK (TO-262) mechanical data

mm inch
Dim
Min Typ Max Min Typ Max
A 4.40 4.60 0.173 0.181
A1 2.40 2.72 0.094 0.107
b 0.61 0.88 0.024 0.034
b1 1.14 1.70 0.044 0.066
c 0.49 0.70 0.019 0.027
c2 1.23 1.32 0.048 0.052
D 8.95 9.35 0.352 0.368
e 2.40 2.70 0.094 0.106
e1 4.95 5.15 0.194 0.202
E 10 10.40 0.393 0.410
L 13 14 0.511 0.551
L1 3.50 3.93 0.137 0.154
L2 1.27 1.40 0.050 0.055

Doc ID 15868 Rev 3 15/18

Packaging mechanical data STB/F/I/P/W18NM60N

5 Packaging mechanical data

D 2 PAK FOOTPRINT

TAPE AND REEL SHIPMENT

REEL MECHANICAL DATA

mm inch
DIM.
MIN. MAX. MIN. MAX.
A 330 12.992
B 1.5 0.059
C 12.8 13.2 0.504 0.520
D 20.2 0795
G 24.4 26.4 0.960 1.039
N 100 3.937
T 30.4 1.197

TAPE MECHANICAL DATA BASE QTY BULK QTY

1000 1000
mm inch
DIM.
MIN. MAX. MIN. MAX.
A0 10.5 10.7 0.413 0.421
B0 15.7 15.9 0.618 0.626
D 1.5 1.6 0.059 0.063
D1 1.59 1.61 0.062 0.063
E 1.65 1.85 0.065 0.073
F 11.4 11.6 0.449 0.456
K0 4.8 5.0 0.189 0.197
P0 3.9 4.1 0.153 0.161
P1 11.9 12.1 0.468 0.476
P2 1.9 2.1 0.075 0.082
R 50 1.574
T 0.25 0.35 0.0098 0.0137
W 23.7 24.3 0.933 0.956

16/18 Doc ID 15868 Rev 3

STB/F/I/P/W18NM60N Revision history

6 Revision history

Table 9. Document revision history

Date Revision Changes

15-Jun-2009 1 First release

– Added RDS(on) typical value
– Added new package, mechanical data: I²PAK
11-Nov-2009 2
– Document status promoted from preliminary data to
datasheet
06-Oct-2010 3 Inserted new value in Table 5.

Doc ID 15868 Rev 3 17/18

 STB/F/I/P/W18NM60N

Please Read Carefully:

Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.

UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.

Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.

ST and the ST logo are trademarks or registered trademarks of ST in various countries.

Information in this document supersedes and replaces all information previously supplied.

The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.

© 2010 STMicroelectronics - All rights reserved

STMicroelectronics group of companies

Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com

18/18 Doc ID 15868 Rev 3