Ord.Num.

TARIFF ARTICLE DESCRIPTION

ELECTRICAL (SpCha 1)
EXTERNAL AREA (Cha 1)

Nr. 1
EXTERNAL EARTHING SYSTEM
E.001.001
EXTERNAL EARTHING SYSTEM

Supply, install and connect of earthing system including copper rods, conductors, tapes, earth electrodes,
earthing manholes, test points etc., as shown on the drawings and diagrams.Including all accessories, fittings and
all necessary to be compliant to local autority and local and international specs and rules. All system, component
and device includes programming test and commissioning.

Included any missing items and necessary adjustement to deliver complete and functional works.

TO SUM

Nr. 2
BONDING OF THE ENTIRE ELECTRICAL SYSTEM
E.001.002

Bonding of the entire electrical installation including all distribution boards, isolators,cable trays, electrical and
mechanical equipment, etc., to earthing system, as shown on the drawings. Including all accessories, fittings and
all necessary to be compliant to local autority and local and international specs and rules. All system, component
and device includes programming test and commissioning.

Included any missing items and necessary adjustement to deliver complete and functional works.

TO SUM

Nr. 3 SQUARE MANHOLE IN VIBRATED CONCRETE 400x400mm. WITH CAST IRON COVER (ONLY
E.002.204 SUPPLY OFMANHOLE COVER)

Supply and install prefabricated manhole with square section in vibrated concrete, with base. Cast iron cover is
included. The structure is supplied in a single monobloc for cable conduits and connection of power supply
and/or low current cables.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules.
Included any missing items and necessary adjustement to deliver complete and functional works.
TO SUM

Nr. 4 SQUARE MANHOLE IN VIBRATED CONCRETE 400x400mm. WITH CAST IRON COVER (ONLY
E.002.205 SUPPLY OFMANHOLE COVER)

Supply and install prefabricated manhole with square section in vibrated concrete, with base. Cast iron cover is
included. The structure is supplied in a single monobloc for cable conduits and connection of power supply
and/or low current cables.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules.
Included any missing items and necessary adjustement to deliver complete and functional works.
TO SUM

Nr. 5
TWIN-LAYER CORRUGATED CABLE DUCT Ø 50 mm
E.002.250

Supply and install of twin-layer cable conduit. Construction: outside corrugated and smooth inside pipe, IMQ
and NF mark license. Composition: neutral high density polyethylene blend. Use: Low voltage electrical and
communication/low current cable protection in buried underground systems. Use temperature limits (- 20 / + 60)
°C. Minimum bending radius: 8 times the DN. Compression test (EN 50086-2-4 / CEI 23-46 / A1 Variant) = 450
N with vertical deflection equivalent to 5 % of the original inside diameter.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules.
Included any missing items and necessary adjustement to deliver complete and functional works.

TO SUM
Nr. 6
TWIN-LAYER CORRUGATED CABLE DUCT Ø 90 mm
E.002.251

Supply and install of twin-layer cable conduit. Construction: outside corrugated and smooth inside pipe, IMQ
and NF mark license. Composition: neutral high density polyethylene blend. Use: Low voltage electrical and
communication/low current cable protection in buried underground systems. Use temperature limits (- 20 / + 60)
°C. Minimum bending radius: 8 times the DN. Compression test (EN 50086-2-4 / CEI 23-46 / A1 Variant) = 450
N with vertical deflection equivalent to 5 % of the original inside diameter.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules.
Included any missing items and necessary adjustement to deliver complete and functional works.

TO SUM

Nr. 7
TWIN-LAYER CORRUGATED CABLE DUCT Ø 125 mm
E.002.252

Supply and install of twin-layer cable conduit. Construction: outside corrugated and smooth inside pipe, IMQ
and NF mark license. Composition: neutral high density polyethylene blend. Use: Low voltage electrical and
communication/low current cable protection in buried underground systems. Use temperature limits (- 20 / + 60)
°C. Minimum bending radius: 8 times the DN. Compression test (EN 50086-2-4 / CEI 23-46 / A1 Variant) = 450
N with vertical deflection equivalent to 5 % of the original inside diameter.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules.

Included any missing items and necessary adjustement to deliver complete and functional works..

TO SUM

Nr. 8
BARE ANNEALED RED COPPER WIRE - 50mm²
E.003.110

Supply, install and connection of Bare annealed red copper wire 99,9% purity, for grounding installations, fixed
laying. Bare annealed stranded copper wire, non-compacted, class 2, Maximum tensile stress: 50 N/mm2,
Minimum bending radius: 6 x maximum external diameter. Including all required fixings, terminationon panels,
accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional works.

TO SUM

POWER SYSTEM (Cha 2)

Nr. 9
WELDED STEEL WIRE CABLE TRAY - 100x75mm
E.002.010

Supply and install cable trays made in welded steel with a 50 mm x 100 mm mesh configuration. The deflection
of the wire cable tray must be no more than 1/200th of the distance between two supports and tested in
accordance with the standard IEC 61537. The loading capacities of the brackets and the hanger torques must be
tested in accordance with the standard IEC 61537. All trays shall be arranged and positioned on the site as
shown in drawings, schemes and riser diagrams. Including all accessories, such as supports, risers, dividers,
accessories, earthing, fittings and all necessary to be compliant to local autority and local and international specs
and rules.

Included any missing items and necessary adjustement to deliver complete and functional works.

TO SUM

Nr. 10
WELDED STEEL WIRE CABLE TRAY - 150x75mm
E.002.011

Supply and install cable trays made in welded steel with a 50 mm x 100 mm mesh configuration. The deflection
of the wire cable tray must be no more than 1/200th of the distance between two supports and tested in
accordance with the standard IEC 61537. The loading capacities of the brackets and the hanger torques must be
tested in accordance with the standard IEC 61537. All trays shall be arranged and positioned on the site as
shown in drawings, schemes and riser diagrams. Including all accessories, such as supports, risers, dividers,
accessories, earthing, fittings and all necessary to be compliant to local autority and local and international specs
and rules.

Included any missing items and necessary adjustement to deliver complete and functional works.

TO SUM
Nr. 11
WELDED STEEL WIRE CABLE TRAY - 200x75mm
E.002.012

Supply and install cable trays made in welded steel with a 50 mm x 100 mm mesh configuration. The deflection
of the wire cable tray must be no more than 1/200th of the distance between two supports and tested in
accordance with the standard IEC 61537. The loading capacities of the brackets and the hanger torques must be
tested in accordance with the standard IEC 61537. All trays shall be arranged and positioned on the site as
shown in drawings, schemes and riser diagrams. Including all accessories, such as supports, risers, dividers,
accessories, earthing, fittings and all necessary to be compliant to local autority and local and international specs
and rules.

Included any missing items and necessary adjustement to deliver complete and functional works.
TO SUM

Nr. 12
WELDED STEEL WIRE CABLE TRAY - 400x75mm
E.002.013

Supply and install cable trays made in welded steel with a 50 mm x 100 mm mesh configuration. The deflection
of the wire cable tray must be no more than 1/200th of the distance between two supports and tested in
accordance with the standard IEC 61537. The loading capacities of the brackets and the hanger torques must be
tested in accordance with the standard IEC 61537. All trays shall be arranged and positioned on the site as
shown in drawings, schemes and riser diagrams. Including all accessories, such as supports, risers, dividers,
accessories, earthing, fittings and all necessary to be compliant to local autority and local and international specs
and rules.

Included any missing items and necessary adjustement to deliver complete and functional works.
TO SUM

Nr. 13
PLIABLE PROTECTIVE PVC CONDUIT Ø 32 mm
E.002.252a

Pliable protective conduit, made in PVC: classification 3321, double layer, to guarantee the total absence of
micro-holes and addictional resistance to impact and trampling. Suitable for electrical system and/or data
trasmission for installation in liquid concrete or inside any walls type.

Material PVC (internal), PVC plastified (external)

Glow Wire Test 960 °C
Resistance to compression 3 (Medium - 750 N)
Resistance to impact 3 (Medium - 2 J)
Resistance to bending 2 (Pliable)
Electrical characteristics 2 (With electrical insulating characteristics)
Fire resistance 1 (Non-flame propagating)
Insulation resistance 100 MO a 500V for 1 minute
Dielectric rigidity 2000 V a 50 Hz for 15 minutes
Standard EN 61386-1 EN 61386-22
Classification 3321
All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules.
Included any missing items and necessary adjustement to deliver complete and functional works.

TO SUM

Nr. 14
PLIABLE PROTECTIVE PVC CONDUIT Ø 40 mm
E.002.253

Pliable protective conduit, made in PVC: classification 3321, double layer, to guarantee the total absence of
micro-holes and addictional resistance to impact and trampling. Suitable for electrical system and/or data
trasmission for installation in liquid concrete or inside any walls type.

Material PVC (internal), PVC plastified (external)

Glow Wire Test 960 °C
Resistance to compression 3 (Medium - 750 N)
Resistance to impact 3 (Medium - 2 J)
Resistance to bending 2 (Pliable)
Electrical characteristics 2 (With electrical insulating characteristics)
Fire resistance 1 (Non-flame propagating)
Insulation resistance 100 MO a 500V for 1 minute
Dielectric rigidity 2000 V a 50 Hz for 15 minutes
Standard EN 61386-1 EN 61386-22
Classification 3321
All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules.
Included any missing items and necessary adjustement to deliver complete and functional works.
TO SUM
Nr. 15
PVC SURFACE MONTING JUNCTION BOX - 190x140x70 mm
E.002.255

Supply and install of surface-mounting waterproof junction box in compliance with EN 60670-1 (CEI 23-48)
and IEC 60670-22 (CEI 23-94) and made in high-performance technopolymers. IP rate protection at least IP44,
without entry holes or with quick entry cable glands, in different self-extinguishing materials (GWT 650 °C).
Insulation class II (according to IEC 61140 standards) Colour Grey RAL 7035 Minimum IP rate IP44 Material:
Technopolymer Shock resistance IK08 Internal dim. LxHxD (mm) 240x190x90 Application Ordinary
junctions Glow Wire Test 650 °C Operating temperature -25 +60 °C Type of material Halogen-free in
compliance with EN 60754-2 Thermo-pressure with ball 85 °C All as shown on the drawings, diagrams and
according to specs and rules, as required for proper operation, according to site characteristics and reqiurements.
Including all accessories, fittings and all necessary to be compliant to local autority and local and international
specs and rules. Included any missing items and necessary adjustement to deliver complete and functional
works.

TO SUM

Nr. 16
XLPE/LSZH COPPER SINGLE CORE CABLE 1x25 mm²
E.003.050
Supply, install and connection of single core copper cable complete with all required fixings, terminationon
panels, accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional works.

TO SUM

Nr. 17
XLPE/LSZH COPPER SINGLE CORE CABLE 1x50 mm²
E.003.051.1
Supply, install and connection of single core copper cable complete with all required fixings, terminationon
panels, accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional worksnt.

TO SUM

Nr. 18
XLPE/LSZH COPPER MULTI CORE CABLE 3G2.5 mm²
E.003.061
Supply, install and connection of multi core copper cable complete with all required fixings, terminationon
panels, accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional works.
TO SUM

Nr. 19
XLPE/LSZH COPPER MULTI CORE CABLE 3G4 mm²
E.003.062
Supply, install and connection of multi core copper cable complete with all required fixings, terminationon
panels, accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional works.

TO SUM

Nr. 20
XLPE/LSZH COPPER MULTI CORE CABLE 3G6 mm²
E.003.063
Supply, install and connection of multi core copper cable complete with all required fixings, terminationon
panels, accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional works.
TO SUM
Nr. 21
XLPE/LSZH COPPER MULTI CORE CABLE 5G6 mm²
E.003.073
Supply, install and connection of multi core copper cable complete with all required fixings, terminationon
panels, accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional works.
TO SUM

Nr. 22
XLPE/LSZH COPPER MULTI CORE CABLE 5G10 mm²
E.003.074
Supply, install and connection of multi core copper cable complete with all required fixings, terminationon
panels, accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional works.
TO SUM

Nr. 23
XLPE/LSZH COPPER MULTI CORE CABLE 5G16 mm²
E.003.075
Supply, install and connection of multi core copper cable complete with all required fixings, terminationon
panels, accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional works.
TO SUM

Nr. 24
XLPE/SWA/FIRE RADED COPPER MULTI CORE CABLE 3G2,5 mm²
E.003.161.new
Supply, install and connection of multi core copper cable complete with all required fixings, terminationon
panels, accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional works.
TO SUM

Nr. 25
XLPE/SWA/FIRE RADED COPPER MULTI CORE CABLE 3G4 mm²
E.003.162.new
Supply, install and connection of multi core copper cable complete with all required fixings, terminationon
panels, accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional works.
TO SUM

Nr. 26
XLPE/SWA/FIRE RADED COPPER MULTI CORE CABLE 3G6 mm²
E.003.163.new
Supply, install and connection of multi core copper cable complete with all required fixings, terminationon
panels, accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional works.
TO SUM
Nr. 27
SMDB MAIN DISTRIBUTION BOARD - SMDB1
E.004.010

Supply, cabling, install and connect of main distribution boards with metal structure , epoxy powder coated, IP
protection rate as indicated in drawings and schemes. Possibility to insert devices with different depths and non-
modular devices, floor-standing execution, complete with base, transparent door with key lock, blind protection
panels, base, heads, pantographed labels, identification by labeling of incoming and outgoing lines, wiring
diagrams, electrical diagrams as built, nameplate indicating the electrical characteristics and features. Complete
with all required accessories, interconnections, cable connections etc.

All as shown and according with drawings, diagrams and according to specs and rules, as required for proper
operation. Including labels with name of the manufacturer and date of construction, serial number, etc.

Included KNX modules as per schemes and diagrams.

N.B. Structure will be considered with a free space (spare) equal to at least 20% of the entire volume.

Structure and enclosure must be considered and in any case sufficient to guarantee heat loss in nominal
absorption conditions.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 28
DISTRIBUTION BOARD - DB01
E.004.011

Supply, cabling, install and connect of distribution boards with metal structure , epoxy powder coated, IP
protection rate as indicated in drawings and schemes. Possibility to insert devices with different depths and non-
modular devices, floor-standing execution, complete with base, transparent door with key lock, blind protection
panels, base, heads, pantographed labels, identification by labeling of incoming and outgoing lines, wiring
diagrams, electrical diagrams as built, nameplate indicating the electrical characteristics and features. Complete
with all required accessories, interconnections, cable connections etc.

All as shown and according with drawings, diagrams and according to specs and rules, as required for proper
operation. Including labels with name of the manufacturer and date of construction, serial number, etc.

Included KNX modules as per schemes and diagrams.

N.B. Structure will be considered with a free space (spare) equal to at least 20% of the entire volume.

Structure and enclosure must be considered and in any case sufficient to guarantee heat loss in nominal
absorption conditions.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 29
DISTRIBUTION BOARD - DB01_UPS
E.004.012

Supply, cabling, install and connect of distribution boards with metal structure , epoxy powder coated, IP
protection rate as indicated in drawings and schemes. Possibility to insert devices with different depths and non-
modular devices, wall execution, transparent door with key lock, blind protection panels, base, heads,
pantographed labels, identification by labeling of incoming and outgoing lines, wiring diagrams, electrical
diagrams as built, nameplate indicating the electrical characteristics and features. Complete with all required
accessories, interconnections, cable connections etc.

All as shown and according with drawings, diagrams and according to specs and rules, as required for proper
operation. Including labels with name of the manufacturer and date of construction, serial number, etc.

Included KNX modules as per schemes and diagrams.

N.B. Structure will be considered with a free space (spare) equal to at least 20% of the entire volume.

Structure and enclosure must be considered and in any case sufficient to guarantee heat loss in nominal
absorption conditions.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM

Nr. 30
EMERGENCY BUTTON
E.004.200
Supply, cabling, install and connect of emergency button connected to the general MCB, IP55 watertight
enclosures, Red RAL 3000, , equipped with 1 NO contact and 1 NC contact and expandable up to 4 contacts,
supplied with 1 long automatically operated push-button when glass is broken or short button for manual
operation.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM
Nr. 31
ELECTRICAL SOCKET 13A+13A - WALL RECESSED MOUNTED
E.008.001

Supply, install, connect, testing and configuration of electrical socket 13A+13A wall recessed mounted.

Electrical socket composed by:

- N.2 switched 2P+E 13A English outlet
- N.1 Plate 4M
- N.1 Frame 4M BS
- N.1 Plate 4M
Reference brand: VIMAR or equivalent
All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional work.
TO SUM

Nr. 32
ELECTRICAL SOCKET 13A+13A - ON FURNITURE MOUNTING
E.008.002

Supply, install, connect, testing and configuration of electrical socket 13A+13A on furniture mountig.

Electrical socket composed by:

- N.2 switched 2P+E 13A English outlet
- N.1 Plate 4M
- N.1 Frame 4M BS
- N.1 Plate 4M
Reference brand: VIMAR or equivalent
All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional work.
TO SUM

Nr. 33
ELECTRICAL SOCKET 15A - WALL RECESSED MOUNTED
E.008.003

Supply, install, connect, testing and configuration of electrical socket 15A wall recessed mounted

Electrical socket composed by:

- N.1 switched 2P+E 15A English outlet
- N.1 Plate 3M
- N.1 Frame 3M BS
- N.1 Plate 3M
Reference brand: VIMAR or equivalent
All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional work.
TO SUM

Nr. 34
ELECTRICAL SOCKET 15A - ON FURNITURE MOUNTING
E.008.004

Supply, install, connect, testing and configuration of electrical socket 15A on furniture mountig.

Electrical socket composed by:

- N.1 switched 2P+E 15A English outlet
- N.1 Plate 3M
- N.1 Frame 3M BS
- N.1 Plate 3M
Reference brand: VIMAR or equivalent
All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional work.
TO SUM

Nr. 35
ELECTRICAL SOCKET AND DATA PLUG OUTLET - ON FURNITURE MOUNTING "PL1"
E.008.005

Supply, install, connect, testing and configuration of electrical socket and data plug outlet on furniture mounting

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional work.
Electrical and data socket composed by:
- N.2 switched 2P+E 13A English outlet
- N.1 Plate 4M
- N.1 Frame 4M BS
- N.1 Plate 4M
- N.2 RJ45
- N.1 Frame 2M BS
- N.1 Plate 2M
Reference brand: VIMAR or equivalent

TO SUM
Nr. 36
ELECTRICAL SOCKET AND DATA PLUG OUTLET - IN FALSE CEILING "TV"
E.008.007

Supply, install, connect, testing and configuration of electrical socket and data plug outlet in false ceiling

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional work.
Electrical and data socket composed by:
- N.5 switched 2P+E 13A English outlet
- N.3 Plate 4M
- N.5 RJ45 Keystone adaptor
- N.2 Frame 3M BS
- N.2 Plate 3M
Reference brand: VIMAR or equivalent
TO SUM

Nr. 37
ELECTRICAL SOCKET - WALL RECESSED MOUNTING "CS"
E.008.008
Supply, install, connect, testing and configuration of electrical socket wall recessed mounting - BO Item
E.008.004.b

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional work.
Electrical and data socket composed by:
- N.1 switched 2P+E 13A English outlet
- N.2 USB socket
- N.1 Frame 4M BS
- N.1 Plate 4M
Reference brand: VIMAR or equivalent

TO SUM

Nr. 38
FLOORBOX WITH ELECTRICAL SOCKET OUTLET AND DATA "TS1"
E.008.020
Supply, install and connect of floor box, recessed floor mounted, with electrical power socket and data plug
composed by: 2 socket 13 A (BS standard) + 2 cat. 6A outlet frame adapter. (UTP cable and plugs indicated in
other item).
Installed in 1 or 2 gang BS standard switchbox. Switch box included. Swicthbox wall recessed mounted as
indicated in drawings, schemes and typical details.

Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM

Nr. 39
FLOORBOX WITH ELECTRICAL SOCKET OUTLET AND DATA "TS"
E.008.021
Supply, install and connect of floor box, recessed floor mounted, with electrical power socket and data plug
composed by: 2 socket 13 A (BS standard).
Floor box included. Floor recessed mounted as indicated in drawings, schemes and typical details.

Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 40
FLOORBOX WITH ELECTRICAL SOCKET OUTLET AND DATA "BD"
E.008.022
Supply, install and connect of floor box, recessed floor mounted, with electrical power socket and data plug
composed by: 2 socket 13 A (BS standard) + 2 cat. 6A outlet frame adapter.
Floor box included. Floor recessed mounted as indicated in drawings, schemes and typical details.

Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM
Nr. 41
FLOORBOX WITH ELECTRICAL SOCKET OUTLET AND DATA "PTV"
E.008.023
Supply, install and connect of floor box, recessed floor mounted, with electrical power socket and data plug
composed by: 2 socket 13 A (BS standard) + 1 cat. 6A outlet frame adapter. (UTP cable and plugs indicated in
other item).
Installed in 1 or 2 gang BS standard switchbox. Switch box included. Swicthbox wall recessed mounted as
indicated in drawings, schemes and typical details.

Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 42
ELECTRICAL, INDUSTRIAL SOCKET OUTLET IEC309 - FLOOR FIXING BRACKET
E.008.050
Supply, install and connect of electrical industrial power socket (IEC309 Standard).
Floor fixing bracket as indicated in drawings, schemes and typical details.

Complete with fixing bracket, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and all
other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM

Nr. 43
OPTICAL AND ACOUSTIC ALARM FOR HANDY BATHROOMS
E.008.097
Supply, Installation, connection, testing and configuration of optical and acoustic alarm for handy bathroom -
BO Item E.008.097.b

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional work.
Composed by:
- N.1 SET/RESET device
- N.1 1P NC 10A push button
- N.1 Eikon cover plates customization 1/20
- N.1 Frame 3M BS
- N.1 Plate 3M BS
- N.1 1P NC 10A cord-operated push button
- N.1 Frame 1M BS
- N.1 Plate 2M BS aluminium
- N.1 Neutral double indicator unit
- N.1 Eikon cover plates customization 1/20
- N.1 LED unit 250V 0.35W
- N.1 230V 50-60Hz
- N.1 Frame 5M BS
- N.1 Plate 5M BS
Reference brand: VIMAR or equivalent
TO SUM

Nr. 44
FANCOIL OUTLET SUPPLY POINT (POWER + BUS)
E.008.100

Supply, install and connect fancoil electrical supply outlet point complete with wiring, cable conduits (power
supply + bus cables), flexible cords and conduit, draw boxes and all other required fittings.

Cable for electrical supply with minimun section 2,5 mm² and according to manufacturer specification. Bus
cable according to manufacturere specification.

Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 45
EXTERNAL UNIT VRF OUTLET POINT (POWER + BUS)
E.008.102

Supply, install and connect electrical supply outlet point for external VRF unit complete with wiring, cable
conduits (power supply + bus cables), flexible cords and conduit, draw boxes and all other required fittings.

Cable single or multi-core EPR/PVC for electrical supply with minimum section as per drawings and scheme
and according to manufacturer specification. Bus cable according to manufacturere specification.

Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM
Nr. 46
HEATING EXCHANGER OUTLET POINT (POWER + BUS)
E.008.105

Supply, install and connect electrical supply outlet point for heating exchanger, complete with wiring, cable
conduits (power supply + bus cables), flexible cords and conduit, draw boxes and all other required fittings.

Cable single or multi-core EPR/PVC for electrical supply with minimum section as per drawings and scheme
and according to manufacturer specification. Bus cable according to manufacturere specification.

Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 47
WATER HEATER OUTLET POINT (POWER)
E.008.106

Supply, install and connect electrical supply outlet point for water heater whit isolator, complete with wiring,
cable conduits (power supply), flexible cords and conduit, draw boxes and all other required fittings.

Cable single or multi-core EPR/PVC for electrical supply with minimum section as per drawings and scheme
and according to manufacturer specification.

Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 48
ANTENNA OUTLET POINT (POWER)
E.008.115

Supply, install and connect electrical supply outlet point for antenna, complete with wiring, cable conduits
(power supply), flexible cords and conduit, draw boxes and all other required fittings.

Cable single or multi-core EPR/PVC for electrical supply with minimum section as per drawings and scheme
and according to manufacturer specification.

Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 49
DATA RACK OUTLET POINT (POWER)
E.008.116

Supply, install and connect electrical supply outlet point for data rack, complete with wiring, cable conduits
(power supply), flexible cords and conduit, draw boxes and all other required fittings.

Cable single or multi-core EPR/PVC for electrical supply with minimum section as per drawings and scheme
and according to manufacturer specification.

Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 50
HAND DRYER OUTLET POINT (POWER)
E.008.118

Supply, install and connect electrical supply outlet point for hand dryer, complete with wiring, cable conduits
(power supply), flexible cords and conduit, draw boxes and all other required fittings.

Cable single or multi-core EPR/PVC for electrical supply with minimum section as per drawings and scheme
and according to manufacturer specification.

Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM
Nr. 51
A/C REMOTE CONTROL OUTLET POINT (POWER+BUS)
E.008.119
Supply, install and connect electrical supply outlet point for remote control display for A/C internal unit (fan-
coil display), complete with wiring, cable conduits (power supply + bus cables), flexible cords and conduit,
draw boxes and all other required fittings.

Cable single or multi-core EPR/PVC for electrical supply with minimum section as per drawings and scheme
and according to manufacturer specification. Bus cable according to manufacturere specification.

Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 52
EXHAUST FAN OUTLET POINT (POWER + BUS)
E.008.122

Supply, install and connect electrical supply outlet point for exhaust fan unit, complete with wiring, cable
conduits (power supply + bus cables), flexible cords and conduit, draw boxes and all other required fittings.

Cable single or multi-core EPR/PVC for electrical supply with minimum section as per drawings and scheme
and according to manufacturer specification. Bus cable according to manufacturere specification.

Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 53
UPS – 10 kVA – Three-Phase
E.015.005.b
Supply, installation, connection, testing and configuration of UPS - 10kVA -
All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
UPS - 15 kVA - Three-Phase, with following features:
Cutting edge technology: Power Factor 1, 96% efficiency, 3 level IGBT, troubleshooting and testing in safety
low voltage
Operates leading and lagging loads without derating

Generator compatibility with ramp up configurable in power and time delay with wide input frequency range

Lift compatibility to efficiently use reinjected energy from generative loads • THDi 150% overload) to garantee
selectivity in the downstream installation
THDi > 3% for a minimized grid impact
Cold start (standard up to 20kVA, optional up to 80kVA)
UPS information, settings and log file easily downloadable on removable SD card from LCD to simplify service
operations
Two strings of internal batteries up to 40kVA
Wide range of battery number per string from 32 to 40 LCD settable (26-40 for 10kVA)
Ready for Li-ion or other battery technology • Smart Battery Detection - immediate alarm once battery
disconnected
Smart Battery Discharge - For Battery Discharge Test without extra loads and connections
Dual input and internal manual bypass
Parallelable up to 6 units, in power or redundancy, LCD settable
Separate or common batteries for parallel systems
Touch screen color LCD display for quick and user friendly operation

Wide communication offer as a standard: two com slots, RS232, USB, programmable dry contacts

Wrong phase sequence rotation protection

Flexible High Power charger
440mm wide fits into higher IP cabinets

Strong overload capacity ( 150% overload) to garantee selectivity in the downstream installation

SNMP, RS485, Modbus board

BATTERY MONITORING SYSTEM ENERBATT 3G
Data Collector with 7" LCD Touch Screen Manage up to 750 kits
RF Receiver Wireless Monitor up to 256 Kits
Battery Measure Kit with Equalizer for 12V <65Ah Battery
String Measure Kit Wireless Voltage Range : 0 ~ 750V, Current Range: 0~3000A, Temperature
Range: 0~100
AC/DC Adapter for Data Collector and RF receiver (Europe power cord), Input: 90~264Vac, Output: 12Vdc/2A
24Watt
Temperature Sensor 0~100 ±1
2 Pin Battery Terminal Auxiliary Connector for 8F
BatreView 3G Monitoring Software
Internal battery trays for simplest battery inspection or replacement
Included 34 batteries set with enclosure

TO SUM
 LIGHTING SYSTEM (Cha 3)

Nr. 54
DALI LIGHTING OUTLET POINT
E.005.001

Supply, install and connect electrical outlet lighting point for DALI lighting fixtures connection complete with
wiring, cable conduits, flexible cords and conduit, ceiling rose, cover plates, draw boxes and all other required
fittings from main conduit/cabletray to the lighting fixture position. Cable type EPR/PVC single or multi-core,
suitable for DALI protocol and according to the installation site and conditions All as shown on the drawings,
diagrams and according to specs and rules, as required for proper operation, according to site characteristics and
requirements. Including all accessories, fittings and all necessary to be compliant to local authority and local and
international specs and rules. Included any missing items and necessary adjustment to deliver complete and
functional works.

TO SUM

Nr. 55
LIGHTING PUSHBUTTON - 1 BUTTON - FOR KNX BUS SYSTEM
E.005.011
Supply, installation, connection, testing and configuration of lighting pushbutton-1 button- for KNX BUS
system - BO Item E.0005.011.2.b

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional work.
Composed by:
- No.1 1P NO 10A push-button 2M
- No.1 2 inputs/outputs interface LED KNX
- No.1 Frame 2M BS
- No.1 Plate 2M
Reference brand: VIMAR or equivalent
TO SUM

Nr. 56
RECESSED LINEAR LED SYSTEM LIGHTING - 10 W/m
E.006.001

Supply, install, connection, testing and configuration of IP67 flexible dot free and perfectly homogeneous linear
LED light line with a 18 mm x 17 mm / 0.71" x 0.67" (W x H) cross section, 10 W/m. Opal polyurethane
encapsulation offering a premium water proof sealing, UV resistance, chemical stability against urban gazes and
protection against abrasion. True Color technology for an optimal rendition of the LED spectrum (minimal color
shift). Vertical bending only, with radius of 150 mm (5.9") the ideal solution for indoor/outdoor organic facade
accent lighting or decorative applications requiring IP67 ingress. Freely configurable in length. Backside cable
feed for an optimal fixture to fixture overlap. 110 mm (4.33") long cable at both end of the luminaire with IP67
male/female connectors. Light source assembled using state of the art automated Reel to Reel (R2R) production
process supporting LED Linear™ Tj Away® thin flexible circuit board technology. In combination with CSP
LED packages an optimal heat dissipation (junction to installation surface) is achieved which guarantees an
outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality CSP LEDs with 3 step MacAdams
(SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code of Wxxx/339
ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of 95
ensuring a excellent light quality. Consistent light intensity all along the strip length is obtained thanks to active
current regulation operated by dedicated integrated circuits (ICs) on each step. Protected against electrostatic
discharge ± 2,000 V and polarity miswiring. Fully PWM dimmable for frequency > 0 Hz up to 2 kHz (flicker
free for frequency higher then 1.2 kHz according to IEEE P1789 standard)

All as shown on the drawings, diagrams and and according to specs and rules.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM

Nr. 57
RECESSED LINEAR LED SYSTEM LIGHTING - 15 W/m
E.006.002

Supply, install, connection, testing and configuration of IP67 flexible dot free and perfectly homogeneous linear
LED light line with a 18 mm x 17 mm / 0.71" x 0.67" (W x H) cross section, 15 W/m. Opal polyurethane
encapsulation offering a premium water proof sealing, UV resistance, chemical stability against urban gazes and
protection against abrasion. True Color technology for an optimal rendition of the LED spectrum (minimal color
shift). Vertical bending only, with radius of 150 mm (5.9") the ideal solution for indoor/outdoor organic facade
accent lighting or decorative applications requiring IP67 ingress. Freely configurable in length. Backside cable
feed for an optimal fixture to fixture overlap. 110 mm (4.33") long cable at both end of the luminaire with IP67
male/female connectors. Light source assembled using state of the art automated Reel to Reel (R2R) production
process supporting LED Linear™ Tj Away® thin flexible circuit board technology. In combination with CSP
LED packages an optimal heat dissipation (junction to installation surface) is achieved which guarantees an
outstanding lifetime of > 60,000 hrs L80/B10. Embeds high quality CSP LEDs with 3 step MacAdams
(SDCM3) binning centered on target CCT (One Bin Only) with an extended photometric code of Wxxx/339
ensuring an exceptional color consistency over the rated lifetime. Premium color rendition with a CRI of 95
ensuring a excellent light quality. Consistent light intensity all along the strip length is obtained thanks to active
current regulation operated by dedicated integrated circuits (ICs) on each step. Protected against electrostatic
discharge ± 2,000 V and polarity miswiring. Fully PWM dimmable for frequency > 0 Hz up to 2 kHz (flicker
free for frequency higher then 1.2 kHz according to IEEE P1789 standard)

All as shown on the drawings, diagrams and and according to specs and rules.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM

Nr. 58
CEILING MOUNTED LED LUMINAIRE 26W
E.006.003

Surface-mounted weather-proof luminaire with PMMA diffuser. With LED system. The luminaire is unsuitable
for corrosive atmospheres (e.g. swimming pools, intensive animal husbandry, tunnels). Luminaire with limited
surface temperature in accordance with DIN EN 60598-2-24, suitable for use in work locations exposed to fire
hazards. For wall or ceiling mounting. Precise alignment of luminaires with continuous line mounting via
interlocking cams and recesses in the front ends. Opal PMMA diffuser manufactured from one piece, with
especially high corner strength. Glare evaluation (EN 12464-1) according to UGR < 25. Luminaire luminous
flux 3100 lm, connected load 26,00 W, luminous efficiency of luminaire 119 lm/W. Light colour warm white,
correlated colour temperature (CCT) 3000 K, general colour rendering index (CRI) Ra > 80. Mean rated service
life L80(tq 30 °C) = 50,000 h. Luminaire body of glass-fibre reinforced polyester, low flammability. Colour
light grey (RAL 9016). Dimensions (L x W): 1289 mm x 110 mm, luminaire height 119 mm. With self-sealing
cable entries at front ends for through-wiring within the luminaire. Permissible ambient temperature (ta): -20 °C
- +30 °C. Safety class (EN 61140): I, protection rating (DIN EN 60529): IP54, impact resistance level in
accordance with IEC 62262: IK02, testing temperature of wire glow test in accordance with IEC 60695-2-11:
650 °C. With electronic transformer, digitally dimmable (DALI). The luminaire complies with fundamental
requirements of applicable EU regulations and product safety legislation and bears the CE symbol.

All as shown on the drawings, diagrams and and according to specs and rules.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM
Nr. 59
CEILING MOUNTED LED LUMINAIRE 50W LED - Type A
E.006.004

Supply, install, connection, testing and configuration of LED ceiling-recessed luminaire (pre-assembled
luminaire); high luminaire luminous flux for applications with high ceilings; "stableWhite" LED luminaire, with
symmetric wide-beam light distribution with maximum luminaire efficiency and optimum photometric
properties; lamp(s): 50 W LED840; Colour rendering Ra > 80, colour temperature 4000 K (neutral white);
Chromaticity tolerance (initial MacAdam): 3; Luminaire luminous flux: 5100 lm, Luminaire efficacy: 101
lm/W; service life: 50000h at 80% luminous flux; includes separate control unit Slave luminaire for DALI
control (DALI only); high-quality reflector unit fixed to modular LED lighting chamber by twist-and-lock
mechanism; high-efficiency LED lighting chamber is integrated in optimised, passive thermal management
system of diecast aluminium; reflector: , faceted, aluminized, highly reflective, iridescence-free; reflector/trim
made of high-quality, UV-resistant polycarbonate; cover ring white; mounting ring of Glass fibre-reinforced
polycarbonate (PC), grey; luminaire unit can be fitted quickly without tools using twist-and-lock mechanism;
IP20; luminaire wired with halogen-free leads; power connection: 5-pole connector terminal, loop-in/loop-out
possible; mains voltage: 220-240V / 0/50/60Hz, for use with 220V DC central battery; tool-free quick
installation using antislip spring clips in ceilings of thickness 1-40mm; ceiling cutout: 200mm, recess depth:
129mm; weight: 1.58 kg

All as shown on the drawings, diagrams and and according to specs and rules.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM

Nr. 60
CEILING MOUNTED LED LUMINAIRE 16W LED - Type B
E.006.005

Supply, install, connection, testing and configuration of LED ceiling-recessed luminaire (pre-assembled
luminaire), designed for use where space is limited in ceiling: recess depth <100mm; "stableWhite" LED
luminaire, with symmetric wide-beam light distribution with maximum luminaire efficiency and optimum
photometric properties; lamp(s): 16 W LED840; Colour rendering Ra > 80, colour temperature 4000 K (neutral
white); Chromaticity tolerance (initial MacAdam): 3; Luminaire luminous flux: 1846 lm, Luminaire efficacy:
115 lm/W; service life: 50000h at 85% luminous flux; includes separate control unit ; high-quality reflector unit
fixed to modular LED lighting chamber by twist-and-lock mechanism; high-efficiency LED lighting chamber is
integrated in optimised, passive thermal management system of diecast aluminium; reflector: , faceted,
aluminized, highly reflective, iridescence-free; reflector/trim made of high-quality, UV-resistant polycarbonate;
cover ring white; mounting ring of Glass fibre-reinforced polycarbonate (PC), grey; luminaire unit can be fitted
quickly without tools using twist-and-lock mechanism; IP20; luminaire wired with halogen-free leads; power
connection: 3-pole connector terminal, loop-in/loop-out possible; mains voltage: 220-240V / 0/50/60Hz, for use
with 220V DC central battery; tool-free quick installation using antislip spring clips in ceilings of thickness 1-
40mm; ceiling cutout: 150mm, recess depth: 81mm; weight: 0.76 kg; Note: To achieve EN12464 compliance in
office applications (UGR<19, aluminized reflector type), please order an additional antiglare ring.

All as shown on the drawings, diagrams and and according to specs and rules.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM

Nr. 61
RECESSED LED LIGHTING 6W LED
E.006.006

Supply, install, connection, testing and configuration of LED ceiling-recessed luminaire (Corten finishing).

LIGHT SOURCE
LED quantity - 1
Power max - 6 W - 9 W
Total lumen output (3000K) - 175 lm - 220 lm
Efficacy lm/W (3000K) - 29 lm/W - 24 lm/W
LOR (3000K) - 27% - 25%
CRI - >80 - >90
LED Temperature (K) - 2700 K-3000 K-3000 K CRI>90-4000 K-5000 K
Average operational life - 50.000 hours

OPTIC
Material - PMMA
Available optics - 3°-10°-30°
Beam direction - Fixed
Flux symmetry - Symmetrical
Accessories -

LED FIXTURE
Material - Aluminum
Finish - Painted (Gray, Black, White, Gold, Gothic Cement, Corten, Oyster White)
Available finishes - Gray, Black, White, Gold, Gothic Cement, Corten, Oyster White
IP Rate - IP40
Working Temperature - -20° ÷ +40°
Accessories -

ELECTRICAL FEATURES
Driver - Remote
Dimmable - Push, 1-10V, DALI
For emergency lighting -
Connection in - In series at 500mA - 700mA
Class - III

MECHANICAL FEATURES
Dimensions (mm) - Ø40 x 111(6W)-124(9W)
Weight - 230 gr (recessed structure not included)
Mounting - Wall, Ceiling
Cut-out (mm) - Ø46
Use - Indoor

All as shown on the drawings, diagrams and and according to specs and rules.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM
Nr. 62
LED LIGHT FIXTURE PACE MARKER
E.006.010.19
Floor recessed Orbit D=28mm - Diffuser optic
Technical description:

Recessed luminaire that can be installed in walls, ceilings and floors. It is designed to use white monochrome
LED lamps, powered with a continuous current of Max 350mA per luminaire. The D = 28 mm round frame has
hidden screws, and is made of AISI 304 stainless steel body and frame with an extra-clear, sodium - calcium
tempered glass cover painted on one side. The luminaire is fixed to the outer casing using special locking seals
that hold it in place. The unit comes complete with LED circuit and a metallized plastic reflector. The product's
wiring system features an A2 stainless steel cable gland with a 1800 mm long H05RNF type 2x1 mm² output
power cable. The cable is equipped with an anti-transpiration device (IP68) that consists of a silicone-coated
joint located on the power cable. Two types of outer casing are available for installation and both can be ordered
separately from the plastic optic assembly. The glass unit, optical assembly and outer casing together guarantee
a maximum static load resistance of 2000 kg. The maximum surface temperature of the glass is less than 40°.
Luminaire protected against polarity inversion.

Installation:

The product is fixed to the outer casing using special locking seals with toolfree installation. The unit can be
recessed in floors, ceilings or walls using the outer casing for installation. It can also be installed in counter
walls and false ceilings using special spring accessories to be ordered separately.

Dimension (mm):
Ø28x68
Colour:
Steel (13)
Weight (Kg):
0.18
Mounting:
wall recessed|Floor recessed|ceiling recessed|ground recessed
Wiring:
Ballasts available: 350mA traditional and watertight IP67 versions. The product comes complete with a 1800
mm long H05RNF type 2x1 mm² output power cable and an electronic plate with a 350mA Max LED. Ballast to
be ordered separately.
Notes:
IP68 rating on both the product and the cable using IP68 connectors
* The product is not suitable for installation in swimming pools and fountains.
Class III;IK09;2000kg;IP68
CE;ENEC-03;BIS;EAC;Retilap;IRAM;A++
Product configuration: E074
Product characteristics:
Total lighting output [Lm]: 7
Total luminous flux at or above an angle of 90° [Lm]: 7
Total power [W]: 1
Emergency luminous flux [Lm]: /
Luminous efficacy [Lm/W]: 7.2
Voltage [V]: -
Life Time: 100,000h - L90 - B10 (Ta 25°C)
Life Time: 100,000h - L80 - B10 (Ta 40°C)
Ambient operating temperature range: from -20°C to +35°C. (*)
Number of optical assemblies: 1
Optical assembly Characteristics Type 1:
Light Output Ratio (L.O.R.) [%]: 6
Number of lamps for optical assembly: 1
Lamp code: LED
Socket: /
ZVEI Code: LED
Ballast losses [W]: 0
Nominal power [W]: 1
Colour temperature [K]: 4000
Nominal luminous [Lm]: 120
CRI: 80
Lamp maximum intensity [cd]: /
Wavelength [Nm]: /
Beam angle [°]: /
MacAdam Step: 2
Supply, install, connect, test and commissioning of lighting fixtures.
All as shown on the drawings, diagrams and and according to specs and rules.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM

Nr. 63
CONSTANT CURRENT POWER SUPPLY UNIT DALI FOR LIGHTING PLACE MAKER
E.006.010.19.a
Constant current power supply unit DALI IP20 20W - VIN = 110-127/220-240VAC 50/60Hz Iout =
350/500/700mA dimensions: 110x52x22
Technical description:
DALI Electronic power supply DALI 20W Max - IP20
Vin=220÷240Vac - 110÷127Vac - 50/60Hz
Vout=28÷43Vdc Iout=350/500/700mA(SELV)
Dimension (mm):
110x52x22
Colour:
Indeterminate (00)
Weight (Kg):
0.2
Wiring:

Notes:
Overvoltage protection: 2KV Common mode, 1KV differenzial mode
IP20
EAC;IRAM;A++

Supply, install, connect, test and commissioning of lighting fixtures.

All as shown on the drawings, diagrams and and according to specs and rules.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM
Nr. 64
KNX OCCUPANCY SENSOR - CEILING RECESSED MOUNTING
E.009.053.1
Supply, install and connect of KNX motion detector complete with wiring, cable conduits, flexible cords and
conduit, ceiling rose, draw boxes and all other required fittings and

accessories.Presence detector mini KNX 8 meters. Detection range (for mounting height 2.5 m, 3 m and 4 m):
circular. Seated persons Ø: max. 5 m, max. 6.5 m and max. 9 m. Walking persons Ø: max. 6.5 m, max. 8 m and
max. 10.5 m. Visible height 16 mm. With 2 channels. Targeted for connection and disconnection of lights bands
depending on the room brightness. Regulation in response to the movement possible. Using the device as
presence and/or movement detectors. Detectors application with 2 power off stages. Detectors application with
integrated monitoring function.

Including commissioning and configuration with ETS software by authorirised and certified Advanced KNX
Partner.
Complete with mounting frame, cover plate, wiring, cable conduits, flexible cords and conduit, draw boxes and
all other required fittings and accessories to connect to main conduit or/and related junction box. Included
certified cable for KNX-EIB cable 2 wire LSZH.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

FIRE ALARM AND VOICE EVACUATION SYSTEM (Cha 4)

Nr. 65
MAIN FIRE ALARM CONTROL PANEL (FACP) WITH 10 LOOP
E.011.001

Supply, install and connect of 2-loop loop system with Advanced and CLIP protocol with 7 "color touch display.
Expandable with expansion cards. Each expansion cards can handle up to 700 logic addresses associated with
individual sensor components and each module with numbering Physics up to159 + 159. Possibility to configure
each loop even in CLIP mode (99 + 99) compatible with sensors and modules with this protocol 750mA for each
loop. CanBus with card Internal power supply of 5, 5 A. Dimensions: 369.8 mm (A) x 445.70 mm (L) x 111 mm
(P) Weight: Approximately 3 Kg (without batteries) Operating temperature: -5 ° C to 45 ° C (recommended + 5
° C to 35 ° C) Humidity: 5 ÷ 95% (without condensation) Degree of protection: IP 30. Certified according to EN
54-2 and EN 54-4 Batteries 2x12V 17Ah included.

Complete with service card. 2 RS232 / RS485 serial ports for Box Printer and LCD Terminals and 2 CanBus
ports for connection to the CanBus network between the switchboards. Distance between the nodes of the
network and the distance between the power plants without the use of service card up to 500 meters. Network
configuration without additional add-ons: up to 16 loops (up to 8 2 loops each).

Complete with 4 additional 2 Loop Advanced expansion cards. Each expansion cards can handle up to 700
logical addresses associated with individual components of the sensors and each module with physical
numbering up to159 + 159.

Complete with blank Box Expanded 6 to 8 Loop Advanced Switchboard. Without LCD display. Can be installed
directly under the control panel. Equipped with 5.5A power supply. Expansion of 6 to 8 loops via additional
expansion cards board. Dimensions: 369.8 mm (A) x 445.70 mm (L) x 111 mm (P). Weight: 2.5 Kg (without
batteries). Operating temperature: -5 ° C to 45 ° C (recommended + 5 ° C to 35 ° C). Humidity: 5 ÷ 95% (no
condensation). Degree of protection: IP 30. Certified in accordance with EN 54-2 and EN 54-4. 2x12V 17Ah
batteries included.

Complete with wiring, cable conduits, flexible cords and conduit, draw boxes and all other required fittings and
accessories.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM

Nr. 66
MAIN FIRE ALARM CONTROL LIQUID CRISTAL DISPLAY (FARP)
E.011.001.1

Supply, install and connect repeater terminal with 7 "color touch screen. Wall cabinet 24V nominal power supply.

Complete with wiring, cable conduits, flexible cords and conduit, draw boxes and all other required fittings and
accessories.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM

Nr. 67
POWER SUPPLY UNIT (PSU) - SUPERVISED
E.011.005

Supply, install and connect 24Vac 5A Auxiliary Power Supply, microprocessor, suitable for use in fire detection
systems where a decentralized power source is needed in relation to the position of the control panel. The
Auxiliary power supply consists of a steel box designed to facilitate installation and operation. This power
supply comes with an input that can be used to turn off battery charging when an alarm condition is triggered,
increasing the current at the output more than 300mA. This system optimizes usage and increases the available
power while allowing full monitoring and protection of outputs. There is a possibility to select standby time
from 24 to 72 hours depending on the installed batteries. Compatible with 110Vac up to 230Vca mains voltages.

Complete with n.2 12V 17-18Ah lead battery.

Complete with 1 input addressable module. The input can be controlled on monitored line. The module is
addressed through rotary switches numbered from 01 to 99. This has a green LED blinking in normal status and
steady fixed in case of alarm. The module of a short circuit isolator. CPD Certificate in agree-ing to EN 54
regulations 17 and 18. Power 15-30VDC. Quiescent current of 310 microA and 510 microA with LED on.
Operating temperature: -20°C to +60°C. Relative humidity up to 95%.

Complete with wiring, cable conduits, flexible cords and conduit, draw boxes and all other required fittings and
accessories.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM
Nr. 68
SMOKE DETECTOR WITH ISOLATING BASE - CEILING MOUNTED
E.011.010

Supply, install and connect of addressable optical smoke detector consisting of an optical camera sensitive to
light scattering. Equipped with advanced digital protocol that provides more management capabilities, capacity
and flexibility. Two three-color LED (red, green and yellow) for a 360° view, programmable fixed or flashing.
Addressing through rotary switches. Equipped with short circuit isolator. CPD Certificate in accordance with
EN 54 Parts 5 and 7. Power 15-32VDC. Operating temperature -30°C to +70°C. Relative humidity at up to 93%
non-condensing. Dimensions: 52mm (H) and a diameter of 102mm with the installed base.

Complete with wiring, cable conduits, flexible cords and conduit, draw boxes and all other required fittings and
accessories.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM

Nr. 69 SMOKE DETECTOR WITH ISOLATING BASE AND REMOTE INDICATOR - ABOVE FALSE
E.011.010.1 CEILING MOUNTED

Supply, install and connect of addressable optical smoke detector consisting of an optical camera sensitive to
light scattering. Equipped with advanced digital protocol that provides more management capabilities, capacity
and flexibility. Two three-color LED (red, green and yellow) for a 360° view, programmable fixed or flashing.
Addressing through rotary switches. Equipped with short circuit isolator. CPD Certificate in accordance with
EN 54 Parts 5 and 7. Power 15-32VDC. Operating temperature -30°C to +70°C. Relative humidity at up to 93%
non-condensing. Dimensions: 52mm (H) and a diameter of 102mm with the installed base.

Complete with optical alarm repeater for detectors. Operating voltage of 3.7VDC. Consumption in alarm 9.5
mA. Dimensions: 70mm x 35mm x 23mm.
Complete with wiring, cable conduits, flexible cords and conduit, draw boxes and all other required fittings and
accessories.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM

Nr. 70 SMOKE DETECTOR WITH ISOLATING BASE AND REMOTE INDICATOR - UNDER RAISED
E.011.010.2 FLOOR

Supply, install and connect of addressable optical smoke detector consisting of an optical camera sensitive to
light scattering. Equipped with advanced digital protocol that provides more management capabilities, capacity
and flexibility. Two three-color LED (red, green and yellow) for a 360° view, programmable fixed or flashing.
Addressing through rotary switches. Equipped with short circuit isolator. CPD Certificate in accordance with
EN 54 Parts 5 and 7. Power 15-32VDC. Operating temperature -30°C to +70°C. Relative humidity at up to 93%
non-condensing. Dimensions: 52mm (H) and a diameter of 102mm with the installed base.

Complete with optical alarm repeater for detectors. Operating voltage of 3.7VDC. Consumption in alarm 9.5
mA. Dimensions: 70mm x 35mm x 23mm.
Complete with wiring, cable conduits, flexible cords and conduit, draw boxes and all other required fittings and
accessories.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM

Nr. 71
HEAT DETECTOR WITH ISOLATING BASE - CEILING MOUNTED
E.011.011

Supply, install and connect of addressable maximum thermal heat detector consists of a thermistor. Suitable for
use in environments having high standard temperature and set at 78° C. Equipped with advanced digital protocol
providing increased management capabilities, capacity and flexibility. Two three-color LEDs (red, green and
yellow) for a 360° view, programmable fixed or flashing. Addressing through rotary switches. Equipped with
short circuit isolator. CPD Certificate in accordance with EN 54 Part 5. Power 15-32VDC. Operating
temperature -30°C to +70° C. Relative humidity at up to 93% non-condensing. Dimensions: 61mm (H) and a
diameter of 102mm with the installed base.

Complete with wiring, cable conduits, flexible cords and conduit, draw boxes and all other required fittings and
accessories.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM

Nr. 72
MANUAL CALL POINT
E.011.015

Supply, install and connect addressable manual break glass call point. Equipped with a red LED to signal local
alarm. Addressing through rotary switches numbered from 01 to 99 and provided with double insulation
protection for the communication line. Supplied with a key test. Power 15-28VDC. Quiescent current of 200
microA and alarm with LED 5mA active. Operating temperature 0°C to +50°C. Relative humidity up to 95%.
Degree of protection IP 24D. CPD Certificate EN 54-11 (M700-KACI-SG). Dimensions: 95mm x 89mm x
59.5mm.

Complete with wiring, cable conduits, flexible cords and conduit, draw boxes and all other required fittings and
accessories.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM
Nr. 73
FIRE ALARM SOUNDER OR HORN
E.011.016
Supply, install and connect electronic addressable sounder and strobe with flashing light with red LED, white
lens and isolator. It's powered directly from the loop. CPR certified in accordance with EN 54-3/17/23 (Open
Class).
Complete with standard base for addressable detectors.
Complete with wiring, cable conduits, flexible cords and conduit, draw boxes and all other required fittings and
accessories.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM

Nr. 74
FIRE ALARM MONITORING - I/O INTERFACE MODULE
E.011.020

Supply, install and connect addressable module with 2 inputs and 1 output. The inputs can be connected on
monitored line. The output has a voltage free contacts. The module, using three consecutive addresses is
addresed through rotary switches numbered from 01 to 99. This has a green LED blinking in normal conditions
and steady in case of alarm. The module is equipped with a short circuit isolator. CPD Certificate in accordance
with EN 54 regulations 17 and 18. Power 15-30VDC. Quiescent current of 340 microA and 600 microA with
LED on. Operating temperature from -20°C to +60°C.

Complete with wiring, cable conduits, flexible cords and conduit, draw boxes and all other required fittings and
accessories.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM

Nr. 75
VOICE EVACUATION AMPLIFER - SYSTEM MAIN RACK CABINET
E.011.050
Supply, install and connect Voice evacuation amplifier.
Complete with:
n° 2 Master Unit 500W
• Master Unit 500W, 4 zones
• Class D+ technology power amplifiers
• Spare power amplifier with automatic replacement
• Internal power supply with battery charger
• Batteries placement inside the cabinet
• Emergency messages on monitored SD card
• Integrated audio source on front panel
n° 2 Interlink Board
• Up to 8 units can be connected together
• Fully redundant communication bus
• Up to microphone consoles can be connected to the MASTER unit, and each one can be extended with 8
microphone console extension

• Local paging for non-emergency purpose connecting to each unit a paging microphone console

• Global and local BGM inputs

n°2 Transformers board
n° 4 Pair of sealed lead acid batteries (12V - 18Ah each.)

Complete with wiring, cable conduits, flexible cords and conduit, draw boxes and all other required fittings and
accessories.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
TO SUM

Nr. 76
FALSE CEILING MONTEND SPEAKER 6W
E.011.051
Supply, install and connect of voice evacuation system ceiling speaker
- Features:
• Speaker for transmitting alarm voice messages with high intelligibility and background music
• Music power/RMS: 24/6W
• 6" diameter dual cone wide band loudspeaker
• Low impedance (8O) or 100V

• Steel protection Fire Dome, terminal strip in ceramic material for connecting fl ameproof input and

output cables, thermal fuse, suitable internal wiring

• Conforms to EN 54-24 regulations
• Structure, front grille, and protection cap in steel, RAL 9003 White
- Technical Specifications
• Acoustical specifications Frequency Response (-10dB): 230 Hz ÷ 20000 Hz
• Max SPL @ 1m: 99 dB
• Max SPL @ 4m: 87 dB
• Coverage angle: 131°
• System Sensitivity: 93 dB
• System Sensitivity 1W @ 4m: 81 dB
- Power section
• Nominal Impedance (ohm): 8 ohm
• Power Handling: 6 W RMS
• Peak Power Handling: 24 W PEAK
• Recommended Amplifier: 12 W
• Protections: Thermal fuse
Complete with wiring, cable conduits, flexible cords and conduit, draw boxes and all other required fittings and
accessories.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM
Nr. 77
MULTI-ZONE EMERGENCY FIREMAN MICROPHONE
E.011.057
Supply, install and connect of Multi-zone emergency fireman microphone.
- Features:
• Handheld dynamic microphone with PTT button
• Complete self-diagnostic
• Power supply voltage from the BUS (first microphone only) or from 24V DC local input
• Pre-recorded message activation
• Alert and evacuation indications
• Wall-mounted metallic box (color: red, RAL 3000) with glass
Complete with wiring, cable conduits, flexible cords and conduit, cover plates, draw boxes and all other required
fittings and accessories.
All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
Including all fittings, batteries, accessories and complete in all respects. Included any missing items and
necessary adjustement.
TO SUM

Nr. 78
CRF2X0.50-EN50200 TWISTED AND SHIELDED CABLE - FOR FIRE ALARM SYSTEM
E.011.100
Supply, install and connection of cables with copper conductor complete with all required fixings,
terminationon panels, accessories, cable glands, clamps, earthing,etc. as shown on the drawings, diagrams and
and according to specs and rules.
Including all fittings, accessories and complete in all respects.

TO SUM

Nr. 79 CVCABLESX2.5 EVAC120 CABLE 2 X 2,5 MM² - EN50200 TWISTED AND SHIELDED CABLE -
E.011.101 FOR PA AUDIO ALARM SYSTEM

Supply, install and connection of cables with copper conductor complete with all required fixings,
terminationon panels, accessories, cable glands, clamps, earthing,etc. as shown on the drawings, diagrams and
and according to specs and rules.
Including all fittings, accessories and complete in all respects.

TO SUM

COMMUNICATION AND SYSTEM (Cha 5)

Nr. 80
SERVER RACK 19" 46U UTP (600x600x2200mm)
E.010.002
Supply, install and connect of Server rack 19" (600x600 mm) h 2200 mm (46U)
LAN, WI-FI and data network services, composed by:
- 1 optical tray 1U for termination of the backbone optical fiber single mode type
- 1 optical tray 1U for termination of the backbone optical fiber multi mode type
- n 6 patch fiber optic cable 9/125 APC 3m
- 6 APC simplex optical fiber compasses
- 6 APC-UPC 3m optical patch
- 8 APC-APC 3m optical patch
- 1 power bars (PDU) with IEC320 C13 and switch
- 1 power bars (PDU) with IEC320 C19 and switch
- 2 panel cable glands
- 2 patch panels 24 RJ45 cat.6A sockets for connection between cabinets
- 25 patch cord cat.6A 2m (side rack)
- 6 optical fiber terminations junctions
All related to plug number in charge (data point) - see drawings and scheme details

Complete with wiring, cable conduits, flexible cords and conduit, and all other required fittings and

accessories.
Including devices commissioning and configuration.
All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 81
DATA POINT (RACK/SWITCH- SIDE + USER SIDE)
E.010.010
Supply, install and connect of complete data point composed by:

Copper data cable for horizontal cabling, 4 twisted pair 23 AWG

Type U/UTP CAT6A

Cat 6A UTP cable shall have a nominal diameter of 7.3 mm. The cable shall be constructed of 23-gauge copper
conductors. The cable shall incorporate discontinuous metallic elements, and shall exhibit alien crosstalk
performance that exceeds TIA and ISO standards. The system shall be classified as Cat 6A UTP

construction. The Cat 6A system shall be third-party verified to support a 30-foot channel (10-foot permanent
link). The cable shall meet IEC 60332-1 flame rating. The cable shall meet ANSI/TIA 568.2-D Cat 6A and
ISO/IEC 11801 Class EA performance requirements.
STANDARDS COMPLIANCE:
• ANSI/TIA-568.2-D Cat 6A
• ISO/IEC 11801 Class EA
• IEC 61156-5
• EN50173
• RoHS 2 Compliant
• PoE standards: IEEE 802.3af, 802.3at, 802.3bt, Cisco UPoE, and Power over HDBaseT™ (PoH) up to 100
watts
• For 100 watt applications - Up to 195 cables in a bundle.

PLUG
n. 2 plugs cat. 6A ISO/IEC 60603-7 compliant

Average cable lenght for data point considered: 50 m

Certification and schedule of data point have to be included and issued by a certified testing instruments and
with following parameters:
Lenght
Propagation Delay
Delay Skew
Impedance
Attenuation
Limit (dB)
Crosstalk XT
NEXT
FEXT
PSNEXT
ELFEXT
PSELFEXT
ACR
PSACR ( si misura in dB )
RL
Complete with wiring, cable conduits,, and all other required fittings and accessories.
All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 82
PoE ACCESS POINT - FLUSHMOUNT
E.010.011
Supply, install and connect of PoE Access point with following features:
OPERATING MODE:
Centralized deployment mode
Distributed deployment mode
MESH mode
Bridge mode
Remote VPN tunnel mode
SECURITY:
WEP, WPA-PSK, WPA-TKIP, WPA2-AES, 802.11i, 802.1X (EAP-TLS, EAP-TTLS, PEAP, LEAP, EAP-
FAST,EAP-SIM, EAP-AKA, and EAP-MD5)
802.1X and captive portal authentication against local database on the controller, RADIUS, and Active
Directory, RADIUS-assisted per-user and per-ESSID access control via MAC filtering

MANAGEMENT
Centrally managed by dedicated controller in order to manage the roaming performancies

Automatically discovers controllers and downloads configuration settings for plug-and-play deployment

Upgrades and management via System Director / Network Manager

Support for SNMP
Concurrent Clients Per Radio (Maximum / Recommended) - 128 / 40
WIRELESS SPECS
Dual-radio, single-band IEEE Std 802.11b/g/n for 2.4 GHz band and IEEE Std 802.11a/n/ac for
5.x GHz band access point with four internal omnidirectional antennas
SUPPORTED RADIO TECNOLOGIES
Dual-radio access point for indoor environment
2x2:2SS (two spatial streams)

Supported 2.4 GHz and 5.x GHz for single-band, dual-radio operation; data rate up to 1167 Mbps

Supported transmit beam-forming (TxBF)

IEEE Std 802.11n/a/g/ac with Orthogonal Frequency Division Multiplexing (OFDM)
IEEE Std 802.11b with 22 MHz channels and Direct Sequence Spread Spectrum (DSSS)
IEEE Std 802.11ac WAVE1 with 20/40/80 MHz (HT20/HT40/VHT80) channel width
IEEE Std 802.11n with 40 MHz (HT40) channel width
IEEE Std 802.11a/g with 20 MHz channel
SUPPORTED MCS INDEX
Supported MCS0-MCS9 for IEEE Std 802.11ac (NSS=1-2)
Supported MCS0-MCS15 for IEEE Std 802.11n
SUPPORTED FREQUENCY BAND
2.400-2.4835 GHz (ISM)
5.150-5.250 GHz (UNII-1)
5.250-5.350 GHz (UNII-2, DFS)
5.470-5.725 GHz (UNII-2 Extended, DFS)
5.725-5.825 GHz (UNII-3)
DATA RATES SUPPORTED (Mbps)

IEEE Std 802.11ac two streams: 13.0-866.7 Mbps (MCS0-HT20 @ 800 nS to MCS9-VHT80 @ 400 nS)

IEEE Std 802.11ac per stream: 6.5-433.3 Mbps (MCS0-HT20 @ 800 nS to MCS9-VHT80 @ 400 nS)

IEEE Std 802.11n Two streams: 13.0-300.0 Mbps (MCS8-HT20@800nS to MCS15-HT40@400nS)

IEEE Std 802.11n per stream: 6.5-150.0 Mbps (MCS0-HT20 @ 800nS to MCS7-HT40@400nS)

IEEE Std 802.11a/g: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
IEEE Std 802.11b: 1, 2, 5.5, and 11 Mbps

Operated at IEEE Std 802.3af power, powered by IEEE Std 802.3af or 802.3 at PoE (Power over Ethernet)

injector or switch
Complete with wiring, cable conduits,, and all other required fittings and accessories.
All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM
 SECURITY SYSTEM (Cha 6)

Nr. 83
IP MINIDOME CAMERA 3MP WDR - PoE
E.013.001
Supply, install and connect of IP Minidome Camera

WDR eyeball camera with CMOS 1/2.8" sensor 2 megapixel progressive scan, true WDR 120 db, autofocus
motorized optics from 2.7 to 13mm and maximum aperture iris F1.2, viewing angle 121.36 th 33.51 degrees (H).

Minimum color lighting 0.0005 lux (F1.2-AGC on) 0 Lux with IR. LED range of up to 30mt with IR smart
lighting system, video compression in UltraH265, H265, H264 and MJPEG, Smart facial recognition, intrusion,
line crossing, people count and blur and scene change verification. Frame rate: 1920 x 1080 30fps.

Built-in microphone.
9:16 corridor mode, triple video streaming, 8 privacy zones, built-in microphone and the ability to accommodate
an SD card up to 256 GB that can be used as an "edge storage" archive in ANR redundancy in case of lack of
communication with UNV NVRs.
ONVIF(Profile S, Profile G) compatibility.
10/100M base-TX Ethernet network adapter, redundant power possibility via DC 12V and POE (IEEE802.3 af),
power voltage tolerance degree plus or minus 25%.
Operating temperature -40 degrees Celsius -60 degrees Celsius.
IP67 security rank.
Maximum absorption 8.16W
Size (DxH)129 plus 110mm.
Weight 0.67 Kg.
Complete with wiring, pole or recessed or wall mounting accessories and adapters and all other required fittings
and accessories.
All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
Including all fittings, batteries, accessories and complete in all respects. Included any missing items and
necessary adjustement.
TO SUM

Nr. 84
BULLET IP65 CAMERA 3MP - PoE
E.013.021
Supply, install and connect of IP bullet IP65 Camera
Super starlight bullet camera with CMOS 1/2.8" sensor 2 megapixel progressive scan, true WDR 120 db,
autofocus motorized optics from 2.7 to 13.5 mm and maximum aperture iris F1.2, viewing angle 121.36 th 33.51
degrees (H).

Minimum color lighting 0.0005 lux (F1.2-AGC on) 0 Lux with IR. Led range of up to 50mt with IR smart
lighting system, video compression in H265, H264 and MJPEG, in addition has the new Ultra H265
compression algorithm that allows a reduction of up to 95% of storage space compared to the H264 system.

2D/3D combined noise reduction. Definition of the ROI region of interest up to 8 areas.
ONVIF(Profile S, Profile G) compatibility, API.
Digital Defog system and Smart facial recognition, intrusion, line crossing, people counting and blur and scene
change verification. Frame rate: 1920-1080 to 30 fps.
Remote link via: P2P (EZCloud) also excludeable; DynDNS, NoIP , EZDDNS , and ip-static (port forwanding).
Automatic configuration of communication ports with UpnP protocol.

9:16 corridor mode, triple video streaming, 8 privacy zones, 1/1 line-level audio input/output, 1/1 alarm-level
input/exit, and ability to accommodate an SD card up to 128 GB that can be used as an "edge storage" archive in
ANR redundancy in case of lack of communication with UNV NVRs.

10/100M base-TX Ethernet network adapter, redundant power capabilities via DC 12V and POE (IEEE802.3
af), power voltage tolerance degree plus or minus 25% power supply and control system against induced surges
up to 6Kv.
The connection distance is extendable up to 250m by activating the Long-Range-Poe option. Automatic channel
capture and IP address with NVR PoE UNV series.
Automatic firmware update via remote server (cloud update)
Operating temperature -35 degrees C .60 degrees Celsius.
IP67 security rank.
Maximum absorption 10W
Size (LxWxH) 146.3 .86 .71.7 mm.
Weight 0.58 kg.
Complete with wiring, pole or recessed or wall mounting accessories and adapters and all other required fittings
and accessories.
All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
Including all fittings, batteries, accessories and complete in all respects. Included any missing items and
necessary adjustement.

TO SUM

Nr. 85
CCTV DATA POINT (SWITCH SIDE + CAMERA SIDE)
E.013.070
Supply, install and connect of CCTV Data point for external use
Complete with:
2 category-rated RJ45 jack cat 6 UTP
80 m average cable cat 6 UTP for external use
Certification and schedule of data point

Complete with wiring, cable conduits, flexible cords and conduit, and all other required fittings and accessories.

All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.

TO SUM

Nr. 86
ACCESS CONTROL PANEL
E.017.001
Supply, install and connect access control panel, EN grade 3, 8 - 512 zones, 64 areas, large metal housing, with
GSM Communication Device, BATTERY 12 V 18 AH
Details:
- 8 onboard zone inputs
- Max 512 zones: wired, wireless or mixed
- Economic input and output plug-in expansion
- Up to 16 shock sensor inputs
- 64 areas
- Up to 2000 users
- EN50131 Security grade 3
- USB port for local configuration
- Up to 32 keypads/Readers
- Up to 30 DGPs
- Multilingual: each user his own language
- Integrated 10/100Mb Ethernet connection
- IP Alarm reporting to OH-NETREC receiver / GPRS optional
- U/D over IP / GPRS
- IP Diagnostics
- Dynamic/Static IP address & DNS support
- Plug-on PSTN dialler for reporting or configuration
- Auto Arming - Schedules - Timed outputs
- Door Shunt functionality
GSM Communication Device
Details:
- Full alarm reporting via GSM
- All popular reporting formats available, including voice reporting and audio listen-in

- Perfectly suitable for primary reporting in case a PSTN or ISDN line or IP connection is not available

- Back-up reporting easily configurable via multiple central stations

- Data connection for Up/Download when connected to Advisor Advanced
- Unique 4800 Baud data connection for U/D
- Dual Band 900 / 1800 MHz
- Six status LED's for Diagnostics
- GSM Antenna included
- SMS Reporting on Advisor Advanced
- SMS Command & Control on Advisor Advanced
Battery 12 V 18 Ah

Complete with wiring, adapters, pedestals or wall-mounting adapters and all other required fittings and
accessories.

Complete with Supply, installation, configuration and commissioning of Software for security system.

All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
 TO SUM

Nr. 87
CARD OR TRASPONDER PROXIMITY READER
E.017.003
Supply, install and connect access card or trasponder proximity readers
Details:
- Bus reader
- Reads the chip serial number (CSN)
- Robust molded plastic housing
- Indoor or outdoor mounting
- Request To Exit input
- Open Collector Output (door open)
Complete with wiring, adapters, pedestals or wall-mounting adapters and all other required fittings and
accessories.
All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM

Nr. 88
DOOR OPENING BUTTON
E.017.004
Supply, install and connect door opening button
Details:
- Indoor/outdoor
- Dust proof and water-resistant (IP65)
- Attractive and timeless design
- Touch Sensitive Technology
- Includes a buzzer
- Dual LED
- Work in pulse (3, 5, 10 sec) or On/Off latched mode
- Surface mount
- Backlight illumination
- Request-To-Exit Touch capacitive push button
Complete with wiring, adapters, pedestals or wall-mounting adapters and all other required fittings and
accessories.
All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM

Nr. 89
ACCESS CONTROLLOR EXPANDER 4 DOORS
E.017.005
Supply, install and connect 4 door access control expander (12V) with battery 12 7,5 Ah
Details:
- Real time alarm & access control on 4 doors
- Full mirror database for offline condition
- Max 12 4-door controllers and 48 intelligent doors/panel
- Global anti-passback
- Region control
- User counter, interlocking, card + PIN
- 8 alarm inputs on board
- Local RS485 bus for up to 16 readers
- Wide range of third party readers supported
- 4 relays on board for lock strikes
- 52 programmable outputs
- 12V Lock power, 4A power supply
Included:
- Sealed Lead-Acid Battery - 12V 7.2Ah
Complete with wiring, adapters, pedestals or wall-mounting adapters and all other required fittings and
accessories.
All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM
Nr. 90
DOOR JUNCTION BOX
E.017.006
Supply, install and connect door junction box
Details:
- Universal door interface for connecting all cables in door application
- Will reduce installation time dramatically
- Connections fully attuned at the Aritech Smart card reader
- Inputs connections for door contact and door lock contact
- Dual loop resistors already provided in the input connections
- Output connections for door lock and buzzer
- All connections short circuit protected
Complete with wiring, adapters, pedestals or wall-mounting adapters and all other required fittings and
accessories.
All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM

Nr. 91
MAGNETIC CONTACT
E.017.007
Supply, install and connect magnetic contact
Details:
- Mounting brackets available for gates, garage doors, freezers
- Rugged construction for long life
- Convenient surface mounting
- 2 m armoured cable
- Tamper loop provided
Complete with wiring, adapters, pedestals or wall-mounting adapters and all other required fittings and
accessories.
All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM

Nr. 92
MAGNETIC LOCK, MONITORED, SURFACE MOUNTED
E.017.008
Supply, install and connect magnetic lock, surface mounted
Details:
- 300 kgf holding power
- Surface mounted
- No residual magnetism
- 12/24 V dc jumper selectable operation
- Monitored changeover
Complete with wiring, adapters, pedestals or wall-mounting adapters and all other required fittings and
accessories.
All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.
TO SUM

Nr. 93
ANTI BURGLAR CONTROL PANEL
E.018.001

Supply, install and connect burglar control panel Advisor Advanced - 512 zones - IP - EN3 - Large Metal
housing, with GSM Communication Device ATS, BATTERY 12 V 18 AH, Trasponder keypad

Complete with wiring, adapters, pedestals or wall-mounting adapters and all other required fittings and
accessories.

Complete with Supply, installation, configuration and commissioning of Software for security system.

All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.

TO SUM

Nr. 94
MAGNETIC CONTACT
E.018.002
Supply, install and connect magnetic contact
Details:
- Mounting brackets available for gates, garage doors, freezers
- Rugged construction for long life
- Convenient surface mounting
- 2 m armoured cable
- Tamper loop provided
Complete with wiring, adapters, pedestals or wall-mounting adapters and all other required fittings and
accessories.
All as shown on the drawings, diagrams and and according to specs and rules, as required for proper operation
and according to the site requirements.
Including commissioning and configuration.
Including all fittings, accessories and complete in all respects. Included any missing items and necessary
adjustement.

TO SUM

Nr. 95
CABLE 2x0,75 + 4x0,22 mmq
E.018.006
Supply, install and connect cable 2X0,75 + 4x0,22 mmq.

Complete with all required fixings, terminationon panels, accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional works
TO SUM
Nr. 96
CABLE BUS RS485 - LSZH
E.018.007
Supply, install and connect CABLE BUS RS485 1 Pair 24AWG (7x32) Tinned Copper, PO Insulation, LSZH
Outer Jacket

Complete with all required fixings, terminationon panels, accessories, cable glands, clamps, earthing,etc.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and reqiurements. Including all accessories, fittings and all necessary to be
compliant to local autority and local and international specs and rules. Included any missing items and necessary
adjustement to deliver complete and functional works
TO SUM

EMERGENCY LIGHTING SYSTEM (Cha 7)

Nr. 97
LED EMERGENCY LIGHTING, 320lm (RECESSED TYPE) - EL-2
E.006.051
LED emergency luminaire - recessed type
Technical characteristics
- Optics: asymmetrical
- Function: Spy Center (centrally supplied with remote central supervision)
- Type: L (Lighting)
- Flux in permanent mode: 320lm
- Power supply: 230Vac 50-60Hz
- Power supply: 216-240 Vdc
- Input power/Apparente power (230Vac): 4,5W / 9,3VA
- Input power (240Vdc): 4,4W
- Insulation class: II
- Protection degree: IP20 (from the top) - IP42 (from the bottom)
- Working temperature: -5°C to +40°C
- Colour: White - RAL 9010
- Compliant to European standards: EN 60598-1, EN 60598-2-22, EN 61347-1, EN 61347-2-7, EN 61347-2-13,
EN 62031, EN 62384
- Compliant to RoHS2 2011/65/UE
- Glow wire 850 °C
- Installation: false-ceiling recessed, ceiling* (* with accessory)
- 5 year warranty
Light source characteristics
- Type: LED
- Lamps: 1 LED
- Color temperature: 6000K
Supply, install, connect, test and commissioning of Emergency / Exit Way lighting fixtures.
Connected to the central Emergency UPS
All as shown on the drawings, diagrams and and according to specs and rules.
Including all fittings, accessories and complete in all respects.
Included any missing items and necessary adjustement.
Including commissioning and configuration.

TO SUM

Nr. 98
LED EMERGENCY LIGHTING FOR GREAT HEIGHT (RECESSED TYPE) - EL-3
E.006.052
LED emergency luminaire for great heights - recessed type
Technical characteristics
- Optics: asymmetrical
- Function: Spy Center (centrally supplied with remote central supervision)
- Type: L (Lighting)
- Flux in permanent mode: 320lm
- Power supply: 230Vac 50-60Hz
- Power supply: 216-240 Vdc
- Input power/Apparente power (230Vac): 4,5W / 9,3VA
- Input power (240Vdc): 4,4W
- Insulation class: II
- Protection degree: IP20 (from the top) - IP42 (from the bottom)
- Working temperature: -5°C to +40°C
- Colour: White - RAL 9010
- Compliant to European standards: EN 60598-1, EN 60598-2-22, EN 61347-1, EN 61347-2-7, EN 61347-2-13,
EN 62031, EN 62384
- Compliant to RoHS2 2011/65/UE
- Glow wire 850 °C
- Installation: false-ceiling recessed, ceiling* (* with accessory)
- 5 year warranty
Light source characteristics
- Type: LED
- Lamps: 1 LED
- Color temperature: 6000K
Supply, install, connect, test and commissioning of Emergency / Exit Way lighting fixtures.
Connected to the central Emergency UPS
All as shown on the drawings, diagrams and and according to specs and rules.
Including all fittings, accessories and complete in all respects.
Included any missing items and necessary adjustement.
Including commissioning and configuration.

TO SUM

Nr. 99
LED EMERGENCY LIGHTING, 270lm (WALL INSTALLATION) - EL-1
E.006.053
LED emergency luminaire - wall installation
Technical characteristics
- Optics: Asymmetrical 0°
- Function: Spy Center (centrally supplied with remote central supervision)
- Type: L (Lighting)
- Flux in permanent mode: 270lm
- Power supply: 230Vac 50-60Hz / 216-240 Vdc
- Insulation class: I
- IP protection degree: IP20
- Working temperature: -5°C to +40°C
- Colour: White - RAL 9003
- Compliant to European standards: EN 60598-1, EN 60598-2-22, EN 61347-1, EN 61347-2-7, EN 61347-2-13,
EN 62031, EN 62384
- Compliant to RoHS2 2011/65/UE
- Glow wire 850 °C
- Installation: wall
- 5 year warranty (please read the Warranty terms)
Light source characteristics
- Type: LED
- Lamps: 1 LED
- Color temperature: 6000K
Supply, install, connect, test and commissioning of Emergency / Exit Way lighting fixtures.
Connected to the central Emergency UPS
All as shown on the drawings, diagrams and and according to specs and rules.
Including all fittings, accessories and complete in all respects.
Included any missing items and necessary adjustement.
Including commissioning and configuration.

TO SUM

Nr. 100
E.006.054 LED EMERGENCY LIGHTING 21W, IP66 - EL-5

Led emergency lighting 21W, IP66

- Housing: aluminum, color: gray
- Protection class: II
- Protection class: IP66
- Types of supply: ILS, CGS
- Input voltage: 230 V AC +/- 10%, 50Hz 220V DC +/- 20%
- Light source: High energy efficient power LEDs
- Light color: 5,700 K
- Power consumption: 21 WDC current consumption: 105 mA
- Temperature range: -25 ° C to +50 ° C
- Weight: 1.90 kg
- Emergency device monitoring module
Supply, install, connect, test and commissioning of Emergency / Exit Way lighting fixtures.
Connected to the central Emergency UPS
All as shown on the drawings, diagrams and and according to specs and rules.
 Including all fittings, accessories and complete in all respects.
Included any missing items and necessary adjustement.
Including commissioning and configuration.

TO SUM

Nr. 101
LED EXIT LIGHT
E.006.056
LED exit light
Technical characteristics
- Function: Spy Center (centrally supplied with remote
central supervision)
- Type: L (Lighting)
- Power supply: 230Vac 50-60Hz / 216-240 Vdc
- Input power/Apparente power (230Vac): 1,4W / 2,9VA
- Input power (240Vdc): 1,2W
- Insulation class: II
- IP protection degree: IP40
- IK protection degree: IK08
- Working temperature: -5°C to +40°C
- Colour: Grey
- Signaling visibility (EN 1838): 22 meters
- Compliant to European standards: EN 60598-1, EN 60598- 2-22, EN 1838, EN 7010
- Photobiological safety exempt group according to EN 62471
- Compliant to RoHS2 2011/65/UE
- Glow wire 850 °C
- Kit of pictograms included

- Installation: ceiling, flag-style, wall*, suspended*, falseceiling recessed*, wall over 503 box* (* with accessory)

- 5 year warranty (please read the Warranty terms)

Light source characteristics
- Type: LED
- Lamps: 8 LED
- Color temperature: 6000K
Supply, install, connect, test and commissioning of Emergency / Exit Way lighting fixtures.
Connected to the central Emergency UPS
All as shown on the drawings, diagrams and and according to specs and rules.
Including all fittings, accessories and complete in all respects.
Included any missing items and necessary adjustement.
Including commissioning and configuration.

TO SUM

Nr. 102
CENTRAL BATTERY PANEL
E.006.080
Central power system (CPS) for emergency lighting installations with central supply luminaires. Control
capability over the line and/or the single emergency luminaire.
Technical characteristics
• Power supply: Tri-Phase 400Vac 50-60Hz
• Output voltage: mono-phase 216Vdc in emergency, 230Vac with AC supply
• Max output load: 2 KW (margin +25%)
• Duration: 3h
• Recharge: 80% of capacity reached in 12h
• Insulation class: I
• System control modules: CPU for internal management, battery charger status control, battery status control
with over-discharge protection
• I/O interface module with 8 digital inputs
• N. 24 direct lines at 650 W with control
• Device for internal temperature control
• Disable function with pushbutton for Fire Officers
• Controls for executing functional and duration tests
• DC output in emergency. No inverter used
• USB interface for programming and log book exporting
• Compliant to norms: EN 50171, EN 50272-2, EN 62034
• Time intervals between verification tests comply to norms: EN 50172, UNI 11222
• Compliant to RoHS2 2011/65/UE
• Steel cabinet with separate compartments
• Colour: Grey - RAL 7035
• Cable entry from top and back side
• Installation: floor
Battery characteristics
• Type: VRLA AGM lead with 10-year life declaration (20°C - EN 50171, EN 50272-2)
• Quantity: 18 pieces
• Voltage: 12 V
• Capacity: 42 Ah•
Battery charger: 60 Ah / C10

Supply, install, connect, test and commissioning of Emergency Central Battery System for emergency lighting

All as shown on the drawings, diagrams and and according to specs and rules.
Including all fittings, accessories and complete in all respects.
Included any missing items and necessary adjustement.
Including commissioning and configuration.

TO SUM

BUILDING MANAGEMENT SYSTEM (Cha 10)

Nr. 103
Only Install, connection, testing and configuration of of KNX BUILDING AUTOMATION SYSTEM
E.018.010.a
Only Install, connection, testing and configuration of of KNX BUILDING AUTOMATION SYSTEM - BOQ
Item E.018.010.b
All cost for programming, testing and commissioning are included.
Programming, testing and commissioning have to be done by Certified KNX Advanced Partner with Official
Certification.

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.

TO SUM

Nr. 104
Only supply of KNX BUILDING AUTOMATION SYSTEM
E.018.010.b
Only supply of KNX BUILDING AUTOMATION SYSTEM and accessories. As per local authorities
requirement.
The system in mainly composed by:
- 100m KNX CABLE 2x2x0,80 mm² LSZH Eca green
- No.9 Supply unit 640mA KNX
- No.18 Binary input 4-channel 120/230V KNX
- No.9 250V 16A 4-output actuator KNX
- No.7 KNX 1-channel DALI Gateway
- No.1 8-channel DALI KNX Gateway
- No.61 Presence detector+luminosity sensor KNX
- No.17 Presence detector+luminosity sensor KNX
- No.30 2 inputs/outputs interface LED KNX

All cost for programming, testing and commissioning are included.

Programming, testing and commissioning have to be done by Certified KNX Advanced Partner with Official
Certification.

TO SUM

Nr. 105
BMS SUPERVISION SYSTEM
E.018.011
Supply, install and connect of General Supervision Building Automation System and accessories. As per local
authorities requirement.
The system in mainly composed by:

No. 10 BACnet IP multiprotocol controller (power supply included) with 1000 integration points

No. 1 Server SVC with Window Server OS, Mouse, Keyboard and 2 x 21,5" Monitor
No. 1 Licence to supervise up to 11500 points.
The system can integrate the following sub-systems:
- HVAC Thermoregulation
- Sprinkler System alarms
- Water Stations
- UPS
 - Gen Set
- Electrical Control Panel Alarm
- Electrical Power Consumption
- Lighting System (DALI)
- KNX Bus
- Emergency Lighting System
All cost for installation, programming, testing and commissioning are included.
All fixtures and accessories are included.
Programming, testing and commissioning have to be done by BACnet - ModBus Advanced Partner with Official
Certification.

TO SUM

Nr. 106
KNX BUILDING AUTOMATION SYSTEM - IP Router
E.018.020
Supply, install and connect of KNX I router.

Connects the KNX bus with the Ethernet network. The device uses the KNXnet/IP protocol for communication
(Routing and Tunneling). It can be used as a fast line and area coupler. The full filter table for main groups 0-31
is supported. KNX devices can be programmed via the LAN using ETS. For this and further clients 5 Tunneling
Servers are available. The IP address can be fixed or can be received from a DHCP server.

Power supply via 12…30 V DC or PoE (IEEE 802.3af class 1).

Power supply 24V -2A included.
The KNX Standard Communication (Multicast) can be switched off.
In this case, up to 10 IPR outer can communicate using unicast communication
All cost for programming, testing and commissioning are included.
All fixtures, accessories and 2x0,80 mm² KNX CABLE are included.
Programming, testing and commissioning have to be done by Certified KNX Advanced Partner with Official
Certification

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
.

TO SUM

Nr. 107
Supply, Install, configuration and programming of PC All in One Touch 15,6"
E.018.031
Supply, install and connect of PC All in One Touch 15.6", operative system Windows 10.
Bracket to wallmounting imcluded.
Screen: 15,6"
Display MultiTouch
Resolution: 1366x768
Features: Widescreen, 16:9, HD
Memory 4 GB
Grafic Board Intel® UHD Graphics 600
Hard Disk: 500 GB
Wireless: WiFi 802.11n (a/c)
Bluetooth: V 4.1
LAN: 10/100/1000 Mbits
Webcam Front, 1 MP
Audio: Realtek ALC662 Azalia Codec
All cost for programming, testing and commissioning are included.
All accessories and cables are included.
Programming, testing and commissioning have to be done by Certified KNX Advanced Partner with Official
Certification

All as shown on the drawings, diagrams and according to specs and rules, as required for proper operation,
according to site characteristics and requirements. Including all accessories, fittings and all necessary to be
compliant to local authority and local and international specs and rules. Included any missing items and
necessary adjustment to deliver complete and functional works.
.

TO SUM
Additional items

Supplu and installation of powe cables to db As per SLD 4Cx50mm2 And

4Cx150mm2 cable