Fogra-Report No.
22253
CGS, Hainburg
Appendix [provided by CGS]
Page 40 of 105
Color Matching Canon C1 Systems to FOGRA39 using
ORIS Press Matcher
___________________________________________________________________
This document explains how to color-match Canon C1 systems to FOGRA39 (ISOcoated v2) using
ORIS Press Matcher under Windows.
___________________________________________________________________
Basic Settings
Before starting the color matching process, connect the device (here: Canon C1) to your computer,
e.g. via LAN. Then set the device to a defined, repeatable state as explained in the user manual.
Having done so, start the ORIS Press Matcher software, i.e. ORIS Hotfolder Manager.
Create a new proofing hotfolder using the “File | New | New hotfolder...” command.
Then right-click the active hotfolder window and select “Printer Setup Wizard” from the context menu.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 41 of 105
Now the wizard will lead you step by step through the setup process.
___________________________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 42 of 105
Enter a name for the printer presets which will be defined using the wizard. Thus all of these settings
can later be applied in one go by simply selecting this name from a list.
A folder with this name will be created under ...\Program Files\CGS\Common Files\CTuner
Setups (installation path may vary). Most of the files you are about to create will be saved to this
folder.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 43 of 105
___________________________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 44 of 105
Printer Driver Settings:
Define the “Properties...” of the printer driver:
Set the Media Type to “1-Sided Coated 3”, the Paper Size to “SRA3” and the Paper Source to “Stack
Bypass”.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 45 of 105
Color Settings:
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 46 of 105
In ColorWise, set the CMYK Simulation Profile to “None” and close the dialog using “OK”.
__________________________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 47 of 105
Enable the “Output as PostScript” option.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 48 of 105
Do not calibrate to a reference printer profile.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 49 of 105
Keep original size and orientation.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 50 of 105
Now select the additional information that should be included on the press sheet:
HEADER
A text printed at the top of the document, e.g. your company name. Do not use any quotes here (").
COLOR BAR
A TIFF or JPEG image containing a color bar. Predefined color bars are available in the installation
directory ...\Program Files\CGS\Common Files\Extras\Proofing Bars. The color bar will
be omitted if it does not fit on the print medium.
CUSTOMER LOGO
A TIFF or JPEG image containing a customer logo. It will be placed at the top of the document, to the
left of the header.
___________________________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 51 of 105
Leave the default values in the PostScript/PDF Options dialog.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 52 of 105
Select “None” for “Linearization – Calibration”.
___________________________________________________________________
Create a “New color table via automatic color matching”. This is an iterative process.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 53 of 105
Select a test chart.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 54 of 105
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 55 of 105
Do not make any filter settings. Print the test chart.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 56 of 105
Measure the test chart.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 57 of 105
Click on “Start measurement” in this dialog.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 58 of 105
Select “I want to improve the result…”, then reprint and remeasure the test chart.
Select “I am satisfied with the result” after the second iteration.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 59 of 105
Do not select a color correction table for spot colors. To simulate spot colors, the CMYK equivalents
will be corrected using the ORIS_DAT color table.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 60 of 105
___________________________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 61 of 105
Congratulations!
You have successfully set up your system and are ready to start printing. Click “Finish” to close the
wizard.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 62 of 105
Color Matching Xerox 700 Digital Color Press Systems to FOGRA39
using ORIS Press Matcher
___________________________________________________________________
This document explains how to color-match Xerox 700 Digital Color Press systems to FOGRA39
(ISOcoated v2) using ORIS Press Matcher under Windows.
___________________________________________________________________
Basic Settings
Before starting the color matching process, connect the device (here: Xerox 700 Digital Color Press)
to your computer, e.g. via LAN. Then set the device to a defined, repeatable state as explained in the
user manual.
Having done so, start the ORIS Press Matcher software, i.e. ORIS Hotfolder Manager.
Create a new proofing hotfolder using the “File | New | New hotfolder...” command.
Then right-click the active hotfolder window and select “Printer Setup Wizard” from the context menu.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 63 of 105
Now the wizard will lead you step by step through the setup process.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 64 of 105
___________________
________________________________________________
Enter a name for the printer presets which will be defined using the wizard. Thus all of these settings
can later be applied in one go by simply selecting this name from a list.
A folder with this name will be created under ...\Program Files\CGS\Common Files\CTuner
Setups (installation path may vary). Most of the files you are about to create will be saved to this
folder.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 65 of 105
___________________________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 66 of 105
Printer Driver Settings:
Define the “Properties...” of the printer driver:
Set the Media Type to “Coated”, the Paper Size to “SRA3”, the Paper Source to “Tray 6” and the
Media Weight to 151-176 gsm.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 67 of 105
Color Settings:
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 68 of 105
In ColorWise, set the CMYK Simulation Profile to “None” and close the dialog using “OK”.
__________________________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 69 of 105
Enable the “Output as PostScript” option.
Do not calibrate to a reference printer profile.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 70 of 105
Keep original size and orientation.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 71 of 105
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 72 of 105
Now select the additional information that should be included on the press sheet:
HEADER
A text printed at the top of the document, e.g. your company name. Do not use any quotes here (").
COLOR BAR
A TIFF or JPEG image containing a color bar. Predefined color bars are available in the installation
directory ...\Program Files\CGS\Common Files\Extras\Proofing Bars. The color bar will
be omitted if it does not fit on the print medium.
CUSTOMER LOGO
A TIFF or JPEG image containing a customer logo. It will be placed at the top of the document, to the
left of the header.
___________________________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 73 of 105
Leave the default values in the PostScript/PDF Options dialog.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 74 of 105
Select “None” for “Linearization – Calibration”.
___________________________________________________________________
Create a “New color table via automatic color matching”. This is an iterative process.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 75 of 105
Select a test chart.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 76 of 105
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 77 of 105
Do not make any filter settings. Print the test chart.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 78 of 105
Measure the test chart.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 79 of 105
Click on “Start measurement” in this dialog.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 80 of 105
Select “I want to improve the result…”, then reprint and remeasure the test chart.
Select “I am satisfied with the result” after the first iteration.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 81 of 105
Do not select a color correction table for spot colors. To simulate spot colors, the CMYK equivalents
will be corrected using the ORIS_DAT color table.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 82 of 105
___________________________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 83 of 105
Congratulations!
You have successfully set up your system and are ready to start printing. Click “Finish” to close the
wizard.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 84 of 105
Color Matching Xerox DocuColor 242-252-260 Systems to FOGRA39
using ORIS Press Matcher
___________________________________________________________________
This document explains how to color-match Xerox DocuColor 242-252-260 systems to FOGRA39
(ISOcoated v2) using ORIS Press Matcher under Windows.
___________________________________________________________________
Basic Settings
Before starting the color matching process, connect the device (here: Xerox DocuColor 242-252-260)
to your computer, e.g. via LAN. Then set the device to a defined, repeatable state as explained in the
user manual.
Having done so, start the ORIS Press Matcher software, i.e. ORIS Hotfolder Manager.
Create a new proofing hotfolder using the “File | New | New hotfolder...” command.
Then right-click the active hotfolder window and select “Printer Setup Wizard” from the context menu.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 85 of 105
Now the wizard will lead you step by step through the setup process.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 86 of 105
_ _________________
_________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 87 of 105
Enter a name for the printer presets which will be defined using the wizard. Thus all of these settings
can later be applied in one go by simply selecting this name from a list.
A folder with this name will be created under ...\Program Files\CGS\Common Files\CTuner
Setups (installation path may vary). Most of the files you are about to create will be saved to this
folder.
___________________________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 88 of 105
Printer Driver Settings:
Define the “Properties...” of the printer driver:
Set the Media Type to “Coated 1”, the Paper Size to “SRA3 SEF” and the Paper Source to “Tray 5
(Bypass)”.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 89 of 105
Color Settings:
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 90 of 105
In ColorWise, set the CMYK Simulation Profile to “None” and close the dialog using “OK”.
__________________________________________________________________
Enable the “Output as PostScript” option.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 91 of 105
Do not calibrate to a reference printer profile.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 92 of 105
Keep original size and orientation.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 93 of 105
Now select the additional information that should be included on the press sheet:
HEADER
A text printed at the top of the document, e.g. your company name. Do not use any quotes here (").
COLOR BAR
A TIFF or JPEG image containing a color bar. Predefined color bars are available in the installation
directory ...\Program Files\CGS\Common Files\Extras\Proofing Bars. The color bar will
be omitted if it does not fit on the print medium.
CUSTOMER LOGO
A TIFF or JPEG image containing a customer logo. It will be placed at the top of the document, to the
left of the header.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 94 of 105
___________________________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 95 of 105
Leave the default values in the PostScript/PDF Options dialog.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 96 of 105
Select “None” for “Linearization – Calibration”.
___________________________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 97 of 105
Create a “New color table via automatic color matching”. This is an iterative process.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 98 of 105
Select a test chart.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 99 of 105
Do not make any filter settings. Print the test chart.
Measure the test chart.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 100 of 105
Click on “Start measurement” in this dialog.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 101 of 105
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 102 of 105
Select “I want to improve the result…”, then reprint and remeasure the test chart.
Select “I am satisfied with the result” after the second iteration.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 103 of 105
Do not select a color correction table for spot colors. To simulate spot colors, the CMYK equivalents
will be corrected using the ORIS_DAT color table.
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 104 of 105
___________________________________________________________________
Fogra-Report No. 22253
CGS, Hainburg
Appendix [provided by CGS]
Page 105 of 105
Congratulations!
You have successfully set up your system and are ready to start printing. Click “Finish” to close the
wizard.
