Company name:
Created by:
Phone:
Date: 11/10/2024
Qty. Description
1 SLV.80.80.150.2.52H.N.51D.A
Note! Product picture may differ from actual product
Product No.: On request
Non-self-priming, single-stage, centrifugal pump designed for handling wastewater, process water and unscreened
raw sewage.
The pump is designed for intermittent and continous operations in submerged installation. The efficient SuperVortex
impeller provides passage of long fibres and solids up to 80 mm and is suitable for wastewater with a dry matter
content of up to 5 %.
The pump comes with a high efficient Grundfos motor built on IE3 motor components.
Further product details
Typical applications are transfer of liquids such as:
• drainage and surface water
• domestic wastewater
• municipal wastewater
• industrial wastewater
• process and cooling water.
The pumps are ideal for pumping the above liquids from places such as:
• municipal network pumping stations
• inlet pumping stations in wastewater treatment plants
• primary clarification pits in wastewater treatment plants
• secondary clarification pits in wastewater treatment plants
• stormwater pumping stations
• public buildings
• residential buildings
• factories and industry.
The pump is suitable for both temporary and permanent installation. The lifting brackets fitted on the pumps enables
easy transportation to and installation on the site.
Pump
The pump housing and motor top are made of cast iron (EN-GJL-250) and the impeller is made of ductile cast-iron
(EN-GJS-500).
All surfaces of the cast iron parts are protected with cataphoresis coating.
The surface of the cast iron pump parts is afterwards painted with environmental friendly powder coating (type NCS
9000N (black), gloss code 30, thickness 100 µm) which ensures high impact and corrosion protection.
The final pump is assembled from already painted parts which ensures that no rust or scale can be formed in grooves
between parts, etc.
The SuperVortex impeller is a symmetrical multivane winglet impeller.
The design ensures a flow entirely outside the impeller providing limited contact between the impeller and the
pumped liquid.
This ensures that long fibres, rags and more passes freely through the pump without getting caught and without
causing clogging or jamming.
Printed from Grundfos Product Centre [2024.40.003] 1
Company name:
Created by:
Phone:
Date: 11/10/2024
Qty. Description
1
The shaft seals of the pump consist of two mechanical seals that ensure a reliable sealing between the pumped liquid
and motor. The shaft seal is a cartridge seal that enables easy service.
The combination of the primary and secondary seals in a cartridge shaft seal system results in a shorter assembly
length compared to conventional shaft seals. Furthermore, this design minimises the risk of incorrect fitting and can
be installed on site without the need for special tools.
- Primary seal: Silicon carbide/silicon carbide (SiC/SiC)
- Secondary seal: Carbon/ceramic
The shaft seal is bidirectional, meaning it operates correctly in case of backflow through the pump.
The pump discharge flange is mounted with the Grundfos SmartSeal auto-coupling gasket, that provides a
completely leak-proof connection between the pump and the base unit of the auto-coupling system. This optimises
the efficiency of the entire pumping system and keeps operating costs at a minimum.
Motor
The motor is a watertight, totally encapsulated motor supplied with a 10 m power cable. A watertight stainless-steel
cable entry with soft shape and sealing rings to prevent damage of the cable or leaks.
The motor construction is compact with short shaft which reduces vibrations resulting in increased efficiency and
lifetime of the shaft seal and ball bearings.
Thermal switches are incorporated in the motor windings to protect the motor against overheating.
The pump is designed for speed-controlled operation to keep the energy consumption at a minimum.
To avoid the risk of sedimentation in the pipes, we recommend that you operate the speed-controlled pump within a
speed range of 30 % to 100 % and at a flow rate above 1 m/s.
Controls:
Moisture sensor: Y
Liquid:
Pumped liquid: Any Newtonian liquid
Liquid temperature range: 10 .. 40 °C
Selected liquid temperature: 20 °C
Density: 998.2 kg/m³
Technical:
Actual calculated flow: 712 l/min
Maximum flow: 2400 l/min
Resulting head of the pump: 40.06 m
Type of impeller: SUPER VORTEX
Max. Particle: 80 mm
Approvals: CE,EAC,RCM
Curve tolerance: ISO9906:2012 3B
Cooling jacket (Yes/No): N
Lifting height class: H
Materials:
Pump housing: Cast iron
EN 1561 EN-GJL-250
Impeller: Cast iron
EN 1563 EN-GJS-500-7
ASTM A536-84 Grade 70-50-05
Motor: Cast iron
EN 1561 EN-GJL-250
Shaft seal: SIC
Printed from Grundfos Product Centre [2024.40.003] 2
Company name:
Created by:
Phone:
Date: 11/10/2024
Qty. Description
1 Secondary shaft seal: SIC/CARBON
Installation:
Range of ambient temperature: -20 .. 40 °C
Maximum operating pressure: 8 bar
Flange standard: DIN
Size of inlet connection: DN 100
Size of outlet connection: DN 80
Pressure rating: PN 10
Maximum installation depth: 20 m
Auto-coupling: 96102240
Frame range: 52
Electrical data:
Power input P1: 17.1 kW
Rated power - P2: 15 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415/660-690 V
Voltage tolerance: +10/-10 %
Max starts per hour: 20
Rated current: 30-28/18-17 A
Maximum current consumption: 29 A
Starting current: 180 A
Rated current at no load: 10.7 A
Rated speed: 2947 rpm
Motor efficiency at full load: 88 %
Motor efficiency at 3/4 load: 84 %
Motor efficiency at 1/2 load: 80 %
Number of poles: 2
Method of start: Y/D
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): H
Explosion proof: no
Cable type: S1BN8-F
Length of power cable: 10 m
Winding resistance: 0.572 Ohm
Cos phi 1/1: 0.88
Cos phi 1/2: 0.75
Cos phi 3/4: 0.84
Others:
Net weight: 261 kg
Gross weight: 289 kg
Shipping volume: 1.04 m³
Printed from Grundfos Product Centre [2024.40.003] 3
Company name:
Created by:
Phone:
Date: 11/10/2024
H SLV.80.80.150.2., 3*400 V, 50Hz eta
Description Value [m] [%]
General information:
55
Product name: SLV.80.80.150.2.52H.N.51D.A
50
Product No: On request
EAN number: On request 45
Technical: 40
Actual calculated flow: 712 l/min 35 70
Maximum flow: 2400 l/min 30 60
Resulting head of the pump: 40.06 m
25 50
Maximum head: 45 m
20 40
Type of impeller: SUPER VORTEX
15 30
Max. Particle: 80 mm
Approvals: CE,EAC,RCM 10 20
Curve tolerance: ISO9906:2012 3B 5 10
Cooling jacket (Yes/No): N 0 0
0 500 1,000 1,500 2,000 Q [l/min]
Lifting height class: H
Q = 712 l/min
Materials:
H = 40.06 m
Pump housing: Cast iron Liquid temperature during operation = 20 °C
Eta pump = 36.8 %
Pump housing: EN 1561 EN-GJL-250
Eta pump+motor = 31.4 %
Impeller: Cast iron P NPSH
[kW] [m]
Impeller: EN 1563 EN-GJS-500-7 P1
15 15
Impeller: ASTM A536-84 Grade 70-50-05
Motor: Cast iron P2
10 10
Motor: EN 1561 EN-GJL-250
Shaft seal: SIC
5 5
Secondary shaft seal: SIC/CARBON
Installation: 0 0
Range of ambient temperature: -20 .. 40 °C P1 = 14.81 kW
Maximum operating pressure: 8 bar P2 = 12.66 kW
NPSH = 4.17 m
Flange standard: DIN
153
DN80
DN100 527
330
160
18
x
8 25
1137
M16
x
8
394
197
Size of inlet connection: DN 100
Size of outlet connection: DN 80
197
394
Pressure rating: PN 10
Maximum installation depth: 20 m 8 x M16
Installation: S
Inst dry/wet: SUBMERGED
Installation: V
Auto-coupling: 96102240
Frame range: 52
1137
Liquid:
8 x 18
Pumped liquid: Any Newtonian liquid 25
Liquid temperature range: 10 .. 40 °C
153
Selected liquid temperature: 20 °C
330 160 DN100
Density: 998.2 kg/m³ DN80 527
Electrical data:
Power input P1: 17.1 kW
Rated power - P2: 15 kW Wiring diagram. 12-wire cable
Mains frequency: 50 Hz
L1 L2 L3 Delta
Rated voltage: 3 x 380-415/660-690 V P1
P5 P2 U1
Voltage tolerance: +10/-10 % P4 P3 V1
W2
W1
Max starts per hour: 20 1
L1
2
L2
3
L3
4
U2
5
V2
6
W2
V2 U2
Rated current: 30-28/18-17 A
L1 L2 L3 Star
Maximum current consumption: 29 A
Y
Starting current: 180 A
Rated current at no load: 10.7 A 1 2 3 4 5 6 P1 P2 P3 P4 P5
U1 V1 W1 U2 V2 W2
Rated speed: 2947 rpm
Optional
Motor efficiency at full load: 88 %
Motor efficiency at 3/4 load: 84 %
Motor efficiency at 1/2 load: 80 %
Printed from Grundfos Product Centre [2024.40.003] 4
Company name:
Created by:
Phone:
Date: 11/10/2024
Description Value
Number of poles: 2
Method of start: Y/D
Enclosure class (IEC 34-5): IP68
Insulation class (IEC 85): H
Explosion proof: no
Built-in motor protection: KLIXON
Cable type: S1BN8-F
Length of power cable: 10 m
Cable resistance: 4.95 mOhm/m
Cable size: 7G4+5X1.5ST
Winding resistance: 0.572 Ohm
Cos phi 1/1: 0.88
Cos phi 1/2: 0.75
Cos phi 3/4: 0.84
Controls:
Moisture sensor: Y
Others:
Net weight: 261 kg
Gross weight: 289 kg
Shipping volume: 1.04 m³
Printed from Grundfos Product Centre [2024.40.003] 5
Company name:
Created by:
Phone:
Date: 11/10/2024
On request SLV.80.80.150.2.52H.N.51D.A 50 Hz
18
x
DN100
8
160
394
1137
527
330
M16
x
8
197
25
153
DN80
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos Product Centre [2024.40.003] 6
Company name:
Created by:
Phone:
Date: 11/10/2024
On request SLV.80.80.150.2.52H.N.51D.A 50 Hz
1227
1137 90
843
930
705
3
508
68
990
0
110
220
463
60
4 X M16
8 X 18
240
24
DN80
413
260
160 110
394
220
527
230
Note! All units are in [mm] unless others are stated.
Disclaimer: This simplified dimensional drawing does not show all details.
Printed from Grundfos Product Centre [2024.40.003] 7
