45

MUNICIPAL/CONTRACTOR EQUIPMENT
O V E R Y E A R S

“Demanded by Those Who Know Quality”

HIGH COUNTRY EXPRESSWAY SNOW PLOW

EWMX1, EWMC1, EPMX1, EPMC1, EWTT1, EPTT1, EWMXTT1, EPMXTT1, EWMCTT1, EPMCTT1

S T A N D A R D F E A T U R E S :
5” x 5” x 3/8” HD Square Tube [5] Table to Moldboard Hook-Up
Table, 90” wide Push Frame, and Points with 1-½” Thick Ribs, 3” Extended Roll
Massive 3-½” Round Pivot Bushing Bearing Surface and 1-¼” Pins Moldboard
POWER EQUIPMENT

Continuously
[2] Telescopic Trip Bars, Welded
Deep “C” [3] Adjustable Compression (shown) or
A-Frame Pitch Settings Extension Trip Springs and
[4] 3” Poly Bushings for
Return Trip Cushion 7” x 4” x ½” Fully
Boxed Bottom Angle
TRUCK EQUIPMENT
ROAD MAINTENANCE EQUIPMENT

Bonnell High Country Expressway Snow Plows are designed insert a 3” x 3” poly bushing into the top and bottom of both
SNOW & ICE CONTROL EQUIPMENT

for removing snow at high-speeds in rural areas and inter- trip bars to absorb shock from tripping. The poly bushing
state highways. The standard extended roll moldboard is provides cushion, making hitting an obstruction less intense
designed to move the snow to the discharge end of the plow and safer on the driver, plow, truck and the road.
more efficiently. This prevents the snow from blowing over
the top of the plow. This plow produces the same results All High Country Plows include an automatic safety feature
when plowing to the left or to the right. which allows the moldboard to trip forward when the blade
encounters an obstruction. After the obstruction is cleared,
Bonnell’s many standard features are what set us apart heavy-duty springs return the moldboard to its plowing posi-
from our competition. These features, outlined above, tion. This minimizes damage to the streets, plow, truck and
include the 7” x 4” x ½” fully boxed bottom angle which adds driver.
strength to keep the moldboard from bending. We also

www.bonnell.com | [email protected]
HC Expressway Snow Plow Specifications High Country Options
CUTTING DISCHARGE DISCHARGE NUMBER CUTTING APPROXIMATE
MODEL EDGE OVERALL CENTER END END OF SPRINGS SWATH WEIGHT OF Plow Lift Options
NUMBER LENGTH LENGTH HEIGHT HEIGHT OVERHANG (EXTENSION) @ 35° BASE UNIT • Chain
10EW3648MX1 10'0" 13’8” 36" 48” 14” 6 8' 2" 2,290 LBS. • Level Raise Lift System™
11EW3649MX1 11'0" 14’8”’ 36" 49” 15” 6 9' 0" 2,367 LBS. • Chain and Saddle
12EW3650MX1 12'0" 15’8”’ 36" 50” 16” 6 9' 9" 2,454 LBS.
• Cable Wrap
10EW4052MX1 10'0" 13’8” 40" 52” 16” 6 8' 2" 2,360 LBS.
11EW4053MX1 11'0" 14’8” 40" 53” 17” 6 9' 0" 2,440 LBS.
12EW4054MX1 12'0" 15’8” 40" 54” 19” 6 9' 9" 2,529 LBS. Plow Hook-Up Options
10EW4760MX1 10'0" 13’8” 47" 60” 18” 6 8' 2" 2,480 LBS. • Quick Attach Loop
11EW4761MX1 11'0" 14’8” 47" 61” 19” 6 9' 0" 2,558 LBS. • Swivel Bar with Push Ears
12EW4762MX1 12'0" 15’8” 47" 62” 20” 6 9' 9" 2,652 LBS. (1-¼" pins @ 30.5”)
All Models Come as Base Units without running gear, lifting assembly and plow hitching method. • Husting Style
• Custom Application

Moldboard Thickness: 10 Gauge Running Gear Options

Moldboard Reinforcing: (7) - ½" x 3" Ribs • Standard-Duty Mushroom Shoes
Adjustable Moldboard Pitch Settings: 35°, 25° or 15° off vertical • Heavy-Duty Mushroom Shoes
Lower Reinforcing Angle: 7” x 4” x ½” • Heavy-Duty Even Wear Shoes
• Carbide Even Wear Shoes
Reversing Frame: 5" x ¼" Wall Structural Tubing
• 10" Steel Caster (Kingpinless) Wheels
Reversing Cylinders: 4" Bore x 12" Stroke (2" Rod) Double Acting
• 5.70 x 8.0 Pneumatic Tires*
Reversing Limits (left & right): 0 to 35 degrees • Foam-Filled Rubber Tires*
Plow to Table Hinge Points: (5) 1-¼" Hinge Pins, Spanning 90” *Should not be used with
Cutting Edge: 5/ " x 6" High Carbon Steel Std. Punch
8 Cable Wrap Lift Assemblies
Pivot Pin: 1-½” Grade 8 Bolt
Cylinder Pins: 1-¼” C1045 Steel Pins Moldboard Options
• ¾” Bottom Angle
• 7-Guage Steel Construction
10-Gauge Steel Construction 10-Gauge Steel Construction • Trimmed Ears
with Extension Springs with Compression Springs • Extra Ribs
(EWMX1) (EWMC1) • Special Sizes Available

Tripping Options
• Extension Trip Moldboard
• Compression Trip Moldboard
• Torsion Trip Cutting Edge
• Dual Trip Moldboard & Cutting Edge

Table Options
• Extended Push Frame
• Manual Reverse
• Power Reverse
UHMW Poly Construction with com- 10-Gauge Steel Construction
pression trip with Torsion Trip Cutting Edge Options
(EPMC1) (EWTT1) • High Carbon Steel
• Rubber
• UHMW Poly
• Carbide Insert with Cover Blade
• Flame Hardened
• Joma Black Cat Blades
All cutting edges available in various sizes

Other Options
• Cushion Valve
• Curb Shoes
• Blade Savers - Carbide
• Blade Guides
Sold By: • Rubber Deflector
• Plow Stand
• Nitrited Cylinders
• Extra Extension Trip Springs

Paint Options
• Special Paint Available

1385 Franklin Grove Rd. • Dixon, IL 61021 • www.bonnell.com

(815) 284-3819 • (800) 851-9664 • Fax (815) 284-8815

Bonnell Industries reserves the right under its product improvement policy to change construction or design
details and furnish equipment when so altered without reference to illustrations or specifications used here-
in. © 2006 Bonnell Industries, Inc. REV050109