Scribd
Upload
30 views

Drops checklist

The DROPS inspection checklist outlines safety and structural integrity checks for camping shelter roofs, container tops, and equipment tops. It includes guidelines for assessing weatherproofing, foreign object hazards, surface conditions, and environmental hazards. Inspectors are advised to document findings, use personal protective equipment, and perform inspections before and after extreme weather events.

Uploaded by

mohsin.hse.kerui
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
30 views

Drops checklist

The DROPS inspection checklist outlines safety and structural integrity checks for camping shelter roofs, container tops, and equipment tops. It includes guidelines for assessing weatherproofing, foreign object hazards, surface conditions, and environmental hazards. Inspectors are advised to document findings, use personal protective equipment, and perform inspections before and after extreme weather events.

Uploaded by

mohsin.hse.kerui
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Drops Checklist for Caravan and Equipment

DROPS (Dropped Objects Prevention Scheme) inspection checklist** for **camping shelter roofs,
container tops, and equipment tops** in English. This checklist focuses on safety, structural integ
rity, and potential hazards:

Camping Shelter Roof Inspection Checklist


1. Structural Integrity
□Check for cracks, dents, or warping in the roof panels.
□ Inspect joints and seams for signs of separation or corrosion.
□ Verify that support beams/frames are secure and undamaged.
2. Weatherproofing
□ Ensure waterproofing layers (e.g., sealant, tarpaulin) are intact and free of tears.
□ Check for water pooling or drainage issues.
□ Inspect gutters and downspouts for blockages.
3. Foreign Object Hazards
□ Remove debris (leaves, branches, tools) from the roof surface.
□ Secure loose items (e.g., solar panels, antennas) with bolts or straps.
□ Check for loose screws, nails, or fasteners.
4. Access Points
□ Ensure roof hatches/ladders are functional and locked when not in use.
□ Inspect safety rails or guardrails (if present) for stability.
Container Roof Inspection Checklist
1. Surface Condition
□ Check for rust, corrosion, or paint damage.
□ Inspect for dents, punctures, or structural deformities.
□ Verify container identification markings are visible.
2. Sealing and Waterproofing
□ Ensure roof seams and corner castings are sealed properly.
□ Check for leaks or moisture ingress.
□ Inspect rubber gaskets (if applicable) for wear.
3. Load-Bearing Capacity
□ Confirm no excessive weight (e.g., stacked items) is placed on the roof.
□ Check for sagging or deformation under load.
4. Safety Hazards
□ Remove loose objects (e.g., tools, debris) from the roof.
□ Secure HVAC units, vents, or pipes to prevent movement.
□ Inspect for sharp edges or protruding bolts.
Equipment Top Inspection Checklist
1. General Condition
□ Inspect for corrosion, cracks, or wear on the equipment surface.
□ Check ventilation grilles/fans for blockages or damage.
□ Verify that protective covers (e.g., caps, guards) are in place.
2. Secured Components
□ Ensure bolts, nuts, and fasteners are tight and undamaged.
□ Secure cables, hoses, or pipes running across the top.
□ Check that labels/warning signs are legible and intact.
3. Environmental Hazards
□ Remove dirt, snow, ice, or standing water.
□ Inspect for bird nests, insects, or biological growth.
4. Access Safety
□ Confirm non-slip surfaces are clean and undamaged.
□ Check guardrails or safety harness anchor points (if present).
General DROPS Compliance
□ Use tool lanyards or tethers when working at height.
□ Document findings and tag defective areas for repair.
□ Review inspection records from previous checks.

Inspector Name:________________________
Date: ________________________
Signature: ________________________
---
**Notes:**
- Perform inspections before and after extreme weather events.
- Use PPE (hard hat, gloves, harness) during checks.
- Photograph critical issues for documentation.

You might also like