Scribd
Upload
17 views2 pages

Confi

The document outlines the Scheme of Inspection and Testing for pipes as per IS 13592: 2013, detailing laboratory requirements, test records, labeling, control units, and rejection procedures. It specifies various tests to be conducted on the pipes, including color, materials, dimensions, and mechanical properties, along with the required equipment and levels of control. Compliance with the Indian Standard is mandatory, and non-conforming products must be disposed of in accordance with the BIS Act, 2016.

Uploaded by

Ajay Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
17 views2 pages

Confi

The document outlines the Scheme of Inspection and Testing for pipes as per IS 13592: 2013, detailing laboratory requirements, test records, labeling, control units, and rejection procedures. It specifies various tests to be conducted on the pipes, including color, materials, dimensions, and mechanical properties, along with the required equipment and levels of control. Compliance with the Indian Standard is mandatory, and non-conforming products must be disposed of in accordance with the BIS Act, 2016.

Uploaded by

Ajay Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PM/ IS 13592/ 2/ June 2021

ANNEX C

Scheme of Inspection And Testing

1. LABORATORY - A laboratory shall be maintained which shall be suitably equipped


(as per the requirement given in column 2 of Table 1) and staffed, where different tests given
in the specification shall be carried out in accordance with the methods given in the
specification.

1.1 The manufacturer shall prepare a calibration plan for the test equipment.

2. TEST RECORDS – The manufacturer shall maintain test records for the tests carried out
to establish conformity.

3. LABELLING AND MARKING – As per the requirements of IS 13592: 2013.

4. CONTROL UNIT – Pipes of same size and type extruded from same compound under
similar conditions from same machine in eight hours shall constitute a control unit.

5. LEVELS OF CONTROL - The tests as indicated in column 1 of Table 1 and the levels of
control in column 3 of Table 1, shall be carried out on the whole production of the factory
which is covered by this plan and appropriate records maintained in accordance with
paragraph 2 above.

5.1 All the production which conforms to the Indian Standard and covered by the licence
should be marked with Standard Mark.

6. REJECTIONS – Disposal of non-conforming product shall be done in such a way so as to


ensure that there is no violation of provisions of BIS Act, 2016.

5
PM/ IS 13592/ 2/ June 2021
TABLE 1

(1) (2) (3)


Test Details Test equipment Levels of Control
Cl. Requirement Test Methods requirement No. of Frequency Remarks
Clause Reference R: required (or) Sample
S: Sub-contracting
permitted
5 Colour of pipes 5 IS 13592 - Each - -
pipe
6 Materials 6.1 to 6.3 IS 13592 S One Each consignment #

7 Dimensions 7.1 to 7.3 IS 13592 R 10 Each control unit -


IS 12235 (Part 1)
8 Physical requirements
8.1 Visual appearance 8.1 IS 13592 - Each - -
pipe
8.2 Reversion test 8.2 IS 13592 R 3 Each control unit -
IS 12235 (Part 5)
8.3 Stress relief test 8.3 IS 13592 R 3 Each control unit -
IS 12235 (Part 6)
8.4 Vicat softening 8.4 IS 13592 S 1 Once in six month $
temperature IS 12235 (Part 2)
8.5 Effect of sunlight 8.5 IS 13592 S 2 Once in six month $
IS 12235 (Part 13)
8.6 Effect on water 8.6 IS 13592 S 1 Once in six months Smallest size pipe
IS 12235 (Part 4) produced shall be
IS 12235 (Part 10) tested @
9 Resistance to sulphuric 9 IS 13592 S 1 Once in six month $
acid IS 12235 (Part 7)

10 Mechanical properties

10.1 Resistance to external 10.1 IS 13592 R Adequat Each control unit -


blows at 0°C Annex-A e pieces
IS 12235 (Part 9)

10.2 Tensile strength 10.2 IS 13592 R 3 Each control unit -


IS 12235 (Part 13)

You might also like