THE

OX

N
RE

E
Patent
TE

Y
C Pending
HN G
OLO INNOVATIVE
BITUMINOUS
POLYMER
®

®
COMPOUND
REOXTHENE TECHNOLOGY

REOXTHENE TECHNOLOGY
WATERPROOFING MEMBRANE WITH REVOLUTIONARY TECHNOLOGY

INCREDIBLY
FLEXIBILITY ALSO AT
LOW TEMPERATURES -10° C
LIGHTWEIGHT
(up to 4 mm = 36 kg)

EVOLIGHT
EVOLIGHT and EVOLIGHT MINERAL
are elastomeric plastomeric
waterproofing membranes with
outstanding performance.
INCREASED They are made using a latest
generation distilled bitumen-based
PRODUCT
compound, ultra-light REOXTHENE
PERFORMANCE technology, with a non-woven
polyester fabric, reinforced and
stabilised by longitudinal glass fibre.

PROFESSIONAL
EXCEPTIONALLY
EASY TO APPLY;
LINE S
PRODUCT
RANGE OF TED AND
HIGHER DAILY FORMULA XPRESSLY
DE
DEVELOPE OFING
OUTPUT FOR RO
NALS
PROFESSIO
 REOXTHENE TECHNOLOG
THE
OX

N
RE

E
E TECHNOLOGY
Patent
®

TE

Y
C Pending
HN

G
OLO

REOXTHENE TECHNOLOG
E TECHNOLOGY
®

REOXTHENE
E TECHNOLOGY TECHNOLOG
®

REOXTHENE is the revolutionary

technology developed by the
POLYGLASS and MAPEI Research
& Development laboratories.
An innovative approach has
revolutionised traditional
bitumenous compound mixing
and compound techniques.
This lets us go beyond
yesterday’s technological limits
in the weight/thickness ratio.

REOXTHENE TECHNOLOGY lets

POLYGLASS produce chemically
innovative compounds with
specific weights, which can’t be
achieved using traditional phase
inversion methods.

REOXTHENE TECHNOLOGY
is protected by a patent
which guarantees exclusive
POLYGLASS rights.
 THE
OX
TECHNICAL DESCRIPTION

N
RE

E
EVOLIGHT and EVOLIGHT MINERAL are elastomeric plastomeric waterproofing membranes with outstanding
performance. They are made using a latest generation distilled bitumen-based compound, ultra-light REOXTHENE Patent

TE

Y
technology, with a non-woven polyester fabric, reinforced and stabilised by longitudinal glass fibre. C Pending
HN

G
The special type of compound, which surpasses previous weight/thickness parameters, and the improved mechanical
characteristics of the fabric (excellent elongation, remarkable tensile strength) makes these membranes suitable for the OLO
heaviest use. The compound’s special formula provides unique low-temperature flexibility (even at -10°C).
The innovative technology used in membrane production, protected by patent, provides another guarantee of the
product’s quality, stability, and durability.

®
EVOLIGHT
REOXTHENE TECHNOLOGY
INTENDED USE AS PER CE STANDARDS

WATERPROOFING MEMBRANE WITH REVOLUTIONARY TECHNOLOGY

SINGLE-LAYER MULTI-LAYER ROOT BARRIER VAPOUR BARRIER FOUNDATIONS UNDER ROOFING
TILES
PRODUCT F.L. U.L. R.D. P.
E. U.H.P. E. U.H.P. E. U.H.P.
3 mm s s s
4 mm s s s s
4,5 mm Mineral s
F.L.: Finishing Layer - U.L.: Underlying Layer - R.D.: Rising Damp - P.: Pitch - E.: Exposed - U.H.P.: Under Heavy Protection

EVOLIGHT and EVOLIGHT MINERAL are particularly indicated for traditional waterproofing, with a plasticity that
ensures perfect surface adhesion. Their excellent mechanical and dimensional stability characteristics indicate use
in civil and industrial waterproofing with all structures (traditional, metal, prefabricated) in which these qualities are
required. Waterproofing systems under heavy protection can be laid in multiple layers with minimum thicknesses of
7 mm (4+3 mm).

TYPES OF FINISH AND SUGGESTIONS

FOR LAYING
EVOLIGHT has a top surface coated with talc, sand, or a lightweight polypropylene, non-woven, fabric. The under-
side is protected and faced with , the special non-stick polyethylene film which disappears
during felt installation.

In its MINERAL version, the top

surface is finished with a protective
Endlap sealing strip
layer of natural or coloured
granules. It has the
(patent pending) overlapping
sealing strip at side and end lap.
Lateral sealing strip

The surfaces to be waterproofed must be dry, clean, smooth and level. Application is quick and easy and is done by
light flaming with propane gas.

STORAGE METHOD
Store the product in a dry place out of direct sunlight. Never stack pallets on top of each other. Rolls must always be
kept standing. Contact with solvents or organic liquids may damage the product. Avoid laying at extreme temperatures
and absolutely avoid puncturing the product (by wearing shoes with cleats, concentrating temporary loads in restricted
areas, or dropping sharp objects).

Keep out of direct sunlight Avoid stacking pallets without Keep the rolls standing Absolutely avoid puncturing
evenly distributing the load the product

AVAILABLE COLOURS
Surfaces protected by coloured mineral granules:

Grey Green Red White Brown

(Other colours available on request)
TECHNICAL CHARACTERISTICS

TEST METHOD TECHNICAL CHARACTERISTICS UNIT OF VALUES VALUES

MEASURE
EN 1848-1 LENGTH m (10 -1%) (10 -1%)
EN 1848-1 WIDTH m (1 -1%) (1 -1%)
EN 1848-1 STRAIGHTNESS mm/10 m Exceeds Exceeds
EN 1849-1 THICKNESS mm 4 (±0,2) 4,5 (±0,2) Mineral
EN 1849-1 WEIGHT PER UNIT AREA kg/m2 NPD NPD
EN 1928-B WATERPROOFING kPa Exceeds Exceeds
EN 13897 WATER TIGHTNESS AFTER ELONGATION
AT LOW TEMPERATURE % NPD NPD
EN 13501-5 FIRE PROPAGATION REACTION - FRoof FRoof
EN 13501-1 REACTION TO FIRE - F F

Considering the various situations of use, the numerous types of support surfaces and the possibilities for use inside COMPLEX WATERPROOF LAYERING, Polyglass SpA cannot assume any liability for damages derived from the product’s results in terms of function or aesthetics.
EN 12316 RESISTANCE TO PEELING OF JOINTS N/50 mm NPD NPD
EN 12317 TENSILE STRENGTH OF JOINTS N/50 mm NPD NPD

EVOLIGHT MINERAL
EN 12311-1 TENSILE STRENGTH
Longitudinal N/50 mm 700 (-20%) 700 (-20%)
Transversal N/50 mm 500 (-20%) 500 (-20%)

EVOLIGHT
EN 12311-1 STATIC LOAD STRENGTH
Longitudinal % 40 (-15) 40 (-15)
Transversal % 45 (-15) 45 (-15)
EN 12691-A IMPACT STRENGTH mm 800 800
EN 12730-A STATIC LOAD STRENGTH Kg 15 15
EN 12310-1 TEAR RESISTANCE
Longitudinal N 170 (-30%) 170 (-30%)
Transversal N 180 (-30%) 180 (-30%)
EN 1107-1 DIMENSIONAL STABILITY % 0,3 0,3
EN 1108 STABILITY OF FORM AFTER CYCLIC
TEMPERATURE CHANGE mm - -
EN 1109 FLEXIBILITY AT LOW TEMPERATURE °C -10 -10
EN 1110 SHEAR STRENGTH AT HIGH
TEMPERATURE °C 120 120
EN 1110 - EN 1296 SHEAR STRENGTH AFTER
THERMAL AGEING °C 110 110
EN 1850-1 - EN 1297 AGEING BY PROLONGED EXPOSURE
TO COMBINED UV RADIATION,
HIGH TEMPERATURES, AND WATER - Exceeds -
EN 12039 GRANULATE ADHESION % - 30
EN 1931 WATER VAPOR TRANSMISSION PROPERTIES µ 20000 20000
EN 1850-1 VISIBLE DEFECTS - ABSENT ABSENT
In compliance with EN 13707 product standards (layers for roofing).

PACKAGE DIMENSIONS
THICKNESS WEIGHT DIMENSIONS
PRODUCT mm kg/mq m
EVOLIGHT 3 mm 3 - 1x10
EVOLIGHT 4 mm 4 - 1x10
EVOLIGHT 4,5 mm MINERAL Grey 4,5 - 1x10
EVOLIGHT 4,5 mm MINERAL Other colours 4,5 - 1x10

Polyglass S.p.A. reserves the right to make any and all modifications required for the ongoing perfection of the product without notice.
Laying EVOLIGHT

300 gr/mq

1 - Treat the area to be waterproofed 2 - Position the corner border near the 3 - Completely strip away the product
with bituminous primer (POLYPRIMER horizontal-vertical joint. identification tape.
HP 45 Professional).

4 - In the colder months, we recommend 5 - Position and apply the sheet by 6 - Pull the sheet up to a certain
heating up the roll of membrane before flaming its bottom surface. height against vertical surfaces.
applying it.

7 - Apply the second sheet with 8 - Lay the second layer by overlapping. 9 - Roll the overlapping areas using the
adequate overlapping. Do not cross the sheets. special pressing roller.

10 - Example of internal corner. 11 - Example of external corner. 12 - Example of vent pipe.

 THE
OX

N
RE

E
Patent

TE

Y
C Pending
HN

G
OLO

®
REOXTHENE TECHNOLOGY
REOXTHENE TECHNOLOGYWATERPROOFING MEMBRANE WITH REVOLUTIONARY TECHNOLOGY
relational - 09/09 - 1000

pany
POLYGLASS SPA
Registered Office - Viale Jenner, 4 - 20159 MILANO
com
a green

Head Office - Via dell’Artigianato, 34 - 31047 Ponte di Piave (TV) - Italy

Tel. +39 04227547 - Fax +39 0422854118 - www.polyglass.com - [email protected]