Scribd
Upload
8 views4 pages

DMM-II_B

The document is a lesson plan for the subject DMM-II for the academic year 2017-18, detailing topics, dates, and methodologies for each teaching period. It covers various mechanical engineering concepts such as journal bearings, piston design, spur gears, and screws, with a focus on problem-solving throughout the course. Each topic is assigned a specific date and is to be taught in a classroom setting.

Uploaded by

Rkrishna A
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
8 views4 pages

DMM-II_B

The document is a lesson plan for the subject DMM-II for the academic year 2017-18, detailing topics, dates, and methodologies for each teaching period. It covers various mechanical engineering concepts such as journal bearings, piston design, spur gears, and screws, with a focus on problem-solving throughout the course. Each topic is assigned a specific date and is to be taught in a classroom setting.

Uploaded by

Rkrishna A
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

LESSON PLAN

Subject: DMM-II

Year: 2017-18 (MECH-B)


Teaching
Period Date (Tentative) Topic Unit No. Remarks
Methodology

3 1 12.06.2017 Types of Journal bearings I Class Room

4 2 12.06.2017 Lubrication, Bearing modulus I Class Room

1 3 13.06.2017 Full and partial bearings I Class Room

Clearance ratio, Heat Class Room


2 4 13.06.2017 I
dissipation of bearings

3 5 19.06.2017 Bearing materials I Class Room

4 6 19.06.2017 Journal bearing design I Class Room

1 7 20.06.2017 Ball and roller bearings I Class Room

Static loading of Class Room


2 8 20.06.2017 I
ball and roller bearings

1 9 27.06.2017 Bearing life, Thrust bearings I Class Room

2 10 27.06.2017 Pivot bearings I Class Room

3 11 10.07.2017 Collar bearings, Split bearings I Class Room

4 12 10.07.2017 Solve the problems I Class Room

1 13 11.07.2017 Thrust in connecting rod II Class Room

Stress due to whipping action on Class Room


2 14 11.07.2017 II
connecting rod ends

Strength & proportions of overhung Class Room


3 15 17.07.2017 II
& centre crank shaft

4 16 17.07.2017 Crank pins, Valve gear mechanism II Class Room


1 17 18.07.2017 Rocker Arm II Class Room

2 18 18.07.2017 Solve the problems II Class Room

3 19 24.07.2017 Solve the problems II Class Room

1 20 25.07.2017 Solve the problems II Class Room

2 21 25.07.2017 Pistons, Forces acting on piston, III Class Room

Construction Design and proportions Class Room


3 22 31.07.2017 III
of piston

4 23 31.07.2017 Cylinder and cylinder III Class Room

1 24 01.07.2017 Cylinder liners III Class Room

2 25 01.07.2017 Design of a cylinder III Class Room

3 26 07.07.2017 Material for piston III Class Room

4 27 07.07.2017 Material for cylinder III Class Room

1 28 08.08.2017 Solve the problems III Class Room

2 29 08.08.2017 Solve the problems III Class Room

3 30 14.08.2017 Solve the problems III Class Room

4 31 14.08.2017 Solve the problems III Class Room

3 32 21.08.2017 Solve the problems III Class Room

4 33 21.08.2017 Solve the problems III Class Room

1 34 22.08.2017 Spur gears – Helical gears IV Class Room

Load concentration factor – Dynamic IV Class Room


2 35 22.08.2017
load factor

Surface compressive strength, IV Class Room


3 36 28.08.2017
Bending strength

4 37 28.08.2017 Design analysis of spur gears IV Class Room


1 38 29.08.2017 Estimation of centre distance IV Class Room

2 39 29.08.2017 module and face width IV Class Room

3 40 04.09.2017 check for plastic deformation IV Class Room

Check for dynamic and wear IV Class Room


4 41 04.09.2017
considerations

1 42 05.09.2017 Solve the problems IV Class Room

2 43 05.09.2017 Solve the problems IV Class Room

3 44 11.09.2017 Solve the problems IV Class Room

4 45 11.09.2017 Solve the problems IV Class Room

1 46 12.09.2017 Design of Screws – V Class Room

2 47 12.09.2017 Square, ACME, Buttress Screws V Class Room

3 48 18.09.2017 Design of Nut V Class Room

Compound screw, Differential screw, V Class Room


1 49 19.09.2017
Ball screw

Possible failures – Overhauling and V Class Room


2 50 19.09.2017
self-locking screws

3 51 25.09.2017 Stresses in power screws V Class Room

1 52 26.09.2017 Design of screw jack V Class Room

2 53 26.09.2017 Solve the problems V Class Room

1 54 03.10.2017 Solve the problems V Class Room

2 55 03.10.2017 Solve the problems V Class Room

3 56 09.10.2017 Solve the problems V Class Room

4 57 09.10.2017 Solve the problems V Class Room

1 58 10.10.2017 Solve the problems V Class Room


2 59 10.10.2017 Solve the problems V Class Room

You might also like