Scribd
Upload
56 views8 pages

SW-102-UV Digital VHF/UHF Power & SWR Meter & Frequency Counter V.S.W.R. Meter Introduction

The SW-102-UV is a digital VHF/UHF power and SWR meter with a maximum measurable power of 120W and a frequency range of 125-525MHz. It features a built-in frequency counter, low insertion loss, and a rechargeable battery, with various adjustable settings for fine-tuning measurements. The device is not compatible with DMR digital radios and includes a user manual and necessary accessories for operation.

Uploaded by

Gustavo García Villarroel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
56 views8 pages

SW-102-UV Digital VHF/UHF Power & SWR Meter & Frequency Counter V.S.W.R. Meter Introduction

The SW-102-UV is a digital VHF/UHF power and SWR meter with a maximum measurable power of 120W and a frequency range of 125-525MHz. It features a built-in frequency counter, low insertion loss, and a rechargeable battery, with various adjustable settings for fine-tuning measurements. The device is not compatible with DMR digital radios and includes a user manual and necessary accessories for operation.

Uploaded by

Gustavo García Villarroel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

SW-102-UV Digital VHF/UHF Power & SWR Meter & Frequency counter

V.S.W.R. meter Introduction


VSWR. Forward and reflected power direct digital readout, without any calibration.
Maximum measurable power range up to 120W.
low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Build in Frequency counter .
All Funtion display ( Frequency,Power , SWR,FW,RW,Battery Level)

Feature & Specification


Frequency range: 125 - 525MHz
Measurable power range: 0.5 - 120W(+-0.5%)
Input read frequency counter (must be < 0.5 W)
Maximum power: 120W
Impedance: 50Ω
Size: W 76 X H 77 X D35 mm.
Weight: < 220 grams
Battery : 3.7V Li-ion Rechargeable Battery

* Not for the DMR digital radio.

Interface: SO239

120 W (Measurable power,Radio must


MAX. Power in
be ANALOG)
V.S.W.R 1.00~19.9
Frequency Ranger COVER : 125MHz~525MHz
Insertion Loss < 0.15dB(VHF) , < 0.25dB(UHF)
Temperature 0℃~60℃
Frequency counter Yes ( TX input must be minimum 0.5W + - 0.5%)
Battery Display Yes
Battery Build-in 3.7V Li-ion Battery
Auto Power Off 1-9 mins
Size 66*68*37 (mm)
Charger in 5V (micro usb)
Backlight AUTO OFF
Interface (in and out ) SO239
Weight 220g (include battery)

• Power ON/OFF:

Press 2 second the [Red button] to power on or power off


MENU Dispaly (Note: Version for up to V3.8)

No. Mode Adj Default Setting Content


1 Adjustment Forward -99 to +99 0 Fine Tune Level %
2 Adjustment Reverse -99 to +99 0 Fine Tune Level %
3 Adjustment Time Base -99 to +99 0 Frequency Counter ,OSC Time Base
4 LCD DIM (Back Light Time) 0-9 1 "0" is always on, 1 min to 9 mins
5 POWER OFF 0-9 3 "0" is always on, 1 min to 9 mins

* Supplier, the product will add functionality without having to give notice

• Set & Save:

1. Press MENU [Blue button]


2. Press F1 [Red button)(Select 1-5 Funtion)
3. Press [Blue button] ( - ), [Yellow button] (+)
4. Press the [Red button ]for 2 seconds
5. Press the [Blue button] to SAVE and EXIT

• How to check the S.W.R. of your Antenna :


Connect to "TX" on Radio output and Antenna to "ANT". Proper adaptor/cable is required if your device has
different type of connectors.

1. Measurement V.S.W.R. : (see Pic.1)


2. SW-102 TX connect Radio RF out
3. Radio TX , SW-102 with display S.W.R. measure data.
Do not affect the test in the following cases, there are objects nearby, placed horizontally.

• How to check the output Watt of your transceiver :


Connect to "TX" on Radio output and dummy Load to "ANT". Proper adaptor/cable is required if your device has
different type of connectors.

1. Measurement Power: (see Pic.2)


2. SW-102 TX connect Radio RF out
3. SW-102 ANT connect 50 ohm Dummy Load
4. Push Radio TX , SW-102 display is Power measure data.
(SW-102 is not for DMR system)

• Package Contents
• 1x SURECOM SW-102-UV Power & SWR Meter (SO239 - connector)
• 1x Power PSU 100-240V
• 1x Charger Cable
• 1x English Users Manual

OLD VERSION : V3.8 ,V4.5,V4.9 ,V5.0,V5.1


2017-8 NEW VERSION : V2.02

**All Specifications are subject to change without notice

Model Country (Market) Language


SW-102 USA,UK,CANADA.. ENGLISH
Below Model for tailor made Multi-language
SW-102-C CHINA 简体
SW-102-F France français
HONGKONG,
SW-102-H 繁體
TAIWAN
SW-102-I India हहिन्दी
SW-102-J JAPAN 日本語
SW-102-K Korea 한한한
SW-102-M Malaysia Malay
SW-102-R RUSSIAN FEDERATION русский
SW-102-SP Spain
SW-102-T Thailand ไทย
Note: Damage your radio when Connect without Antenna and Dummy.
SURECOM SW-102 Q &A
• No Operation?

1. PLease charge with USB cable +5V , or come with PSU .


1. 2. Push and hold on the "RED" botton .
3. Replacement battery when battery dead. (below Ver 5.1 use by 14500battery,V1.X
use by li-ion polymer battery.
4. There are still problems with steps 1. and 2.and 3., please contact service center.

• Watt /SWR read data is not hold on ?

2. 1. Some Radio problem when end of TX


2. .Radio output TX is not stabilizing.

• Read the watt data is not accurate ?

1. SW-102 is not for DMR system


2. Don't not use the antenna get the watt data.
3. 3. Please use the correct power dummy load to measure (must be 50 OHM)
4. The data read error when not read the frequency from radio
5. The TX input is weak
6. Input Watt below 0.5W

• Read the S.W.R. data is not accurate?

1. SW-102 is not for DMR system


4.
2. Do not affect the test in the following cases, there are objects nearby
3. Do not affect the test in the following cases,placed horizontally.

• Read the Frequency counter is not display or read frequency not accurate?
e.g. Radio is 145.000 , read 145.003

5. 1. SW-102 is not for DMR system


2. Input below 0.5W
3. Please use menu mode and fine tune the frequency offset.

• Display have problem ? e.g.BLack or Garbled or no Display

1. Restart the SW-102


6.
2. Remove the inside battery.
3. There are still problems with steps 1. and 2., please contact service center.

• How to RESET the mirco chip

1. Off mode ,
7.
2. Hold the Red button when the display show "restore to default "
3. There are still problems with steps 1. and 2., please remove the battery.

**All Specifications are subject to change without notice


VSWR (s11) Reflected Power (%) Reflected Power (dB)

1.0 0.000 0.00 -Infinity

1.5 0.200 4.0 -14.0

2.0 0.333 11.1 -9.55

2.5 0.429 18.4 -7.36

3.0 0.500 25.0 -6.00

3.5 0.556 30.9 -5.10

4.0 0.600 36.0 -4.44

5.0 0.667 44.0 -3.52

6.0 0.714 51.0 -2.92

7.0 0.750 56.3 -2.50

8.0 0.778 60.5 -2.18

9.0 0.800 64.0 -1.94

10.0 0.818 66.9 -1.74

15.0 0.875 76.6 -1.16

20.0 0.905 81.9 -0.87

-0.35
50.0 0.961 92.3

, Reflected Power, and (s11)

You might also like