Scribd
Upload
6 views

Technical Data Sheet

The Norden Unshielded PCB Punch Down Patch Panel supports Category 5E/6/6A standards and is designed for LAN, multimedia, and Power over Ethernet applications, exceeding TIA and ISO specifications. It features a flat, PCB-based design with 24 ports, easy termination options, and comes with necessary accessories for installation. Compliance with various standards ensures reliability and performance, making it suitable for high-bandwidth networking needs.

Uploaded by

Mubashir Vm
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
6 views

Technical Data Sheet

The Norden Unshielded PCB Punch Down Patch Panel supports Category 5E/6/6A standards and is designed for LAN, multimedia, and Power over Ethernet applications, exceeding TIA and ISO specifications. It features a flat, PCB-based design with 24 ports, easy termination options, and comes with necessary accessories for installation. Compliance with various standards ensures reliability and performance, making it suitable for high-bandwidth networking needs.

Uploaded by

Mubashir Vm
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

UNSHIELDED

PCB PUNCH DOWN PATCH PANEL

Category 5E/6/6A Unshielded PCB Punch Down Patch Panel from


Norden exceeds TIA and ISO component specifications, supporting
network convergence protocols, delivering maximum bandwidth and
extended reliability for all LAN, multimedia, and Power over Ethernet
applications.
The vertically mounted PCB provides easy termination using a Krone
or 110 punch down tool and there are colour coded labels for both
568A and 568B wiring configurations. All performance parameters,
including NEXT, FEXT Attenuation and Return Loss are designed to
meet the Cabling standard. The patch panel comes with mini cable
ties, cage nuts and rear cable management bar as standard.

COMPLIANCE
IEEE 802.af, IEEE 802.3at for PoE applications.
ISO/IEC 11801, TIA/EIA-568B.2-1

DESIGN & TECHNICAL DETAILS


Panel Type Flat
Panel Style PCB Based Loaded
Mounting Style Punch Down
Panel Width 483 mm (19”)
Panel Height 1U: 44.2 mm
Panel Depth 95 mm
Outlets 24 Port
Connector Module Holder High Impact, Flame-Retardant Plastic Compound, Ul 94 V-0
Cover Colour and Material Black, Powder Coated Steel
IDC Body UL94V-2 PC & Glass Fibre
IDC Contacts Phosphor Bronze with Tin Plating
IDC Wire Gauge 22-26 AWG
RJ45 Life Minimum 750 mating cycles
Dielectric Strength 1000V RMS at 60Hz for 1 minute
Insulation Resistance 500mΩ minimum
Contact Resistance 2mΩ per contact

STANDARDS
Wiring Standards EIA/TIA 568 A/B
Flammability rating UL 94V-0
Safety Rating UL1863
Transmission ISO/IEC 11801:2002 ANSI /TIA/EIA-568.B.2-10
Copper System - Version 1.0

ORDERING INFORMATION
Part Number Description
121-21B18024L Category 5E Unshielded PCB Punch Down Patch Panel 24 Port Loaded
121-31B18024L Category 6 Unshielded PCB Punch Down Patch Panel 24 Port Loaded
121-41B18024L Category 6A Unshielded PCB Punch Down Patch Panel 24 Port Loaded

www.nordencommunication.com

You might also like