Product Data

MINI
SVR SERIES
Automatic Voltage
Regulation
AC AUTOMATIC
Spike & Surge
Protection VOLTAGE STABILISERS
Electrical Noise
& LINE CONDITIONERS
Filter

Lightning
Surge Protection

Digital Servo Electronic Design

√
Brownout & Over / Under
√
Voltage Protection

Transient Voltage Surge

√
& Spike Protection

Electrical Noise &

√ Lightning Surge Protection

√ Wide Permissible Input Voltage

Precise Output Voltage Accuracy

√
- Default ±1% (Adjustable ±1% to ±5%)

√ Inbuilt Manual Bypass

Restart Time Delay / Waiting

√ Time to Limit Nuisance Tripping

Restart Time 1 kVA to 15 kVA

Delay

User Selectable
SINGLE PHASE - 2 WIRE
Response Times,
Output Voltage &
50 / 60Hz
Accuracy
H Models
220V / 230V / 240V
L Models
110V / 115V / 120V / 127V
mSVR- 2021-12
© Sinalda UK Limited - Sinalda reserve the right to change any or all the specifications indicated or implied without prior notice. www.sinalda.com
mSVR SERIES - H & L MODELS VOLTAGE STABILISERS & CONDITIONERS
Low Cost Protection For GENERAL TECHNICAL SPECIFICATION
Today’s Modern Power Needs RATINGS kVA / kW 1, 2, 3, 5, 7.5, 10 & 15 kVA / kW

NOMINAL H MODELS 220V - 230V - 240V AC Single Phase, 2 Wire (L,N & G/E)
INPUT
The Mini SVR Series AC Automatic Voltage Stabiliser VOLTAGES L MODELS 110V - 115V - 120V - 127V AC Single Phase, 2 Wire (L,N & G/E)
range is based on 7 different power ratings:
INPUT VOLTAGE RANGE See Relevant Model Selection Tables
1 kVA (1 kW) 2 kVA (2 kW)
OUTPUT VOLTAGE ACCURACY ±1% (Default) - Adjustable 1% to 5%
3 kVA (3 kW) 5 kVA (5kW)
OPERATING FREQUENCY 50 / 60 Hz (35 to 63 Hz)
7.5 kVA (7.5 kW) 10 kVA (10 kW)
RESTART TIME DELAY 5 Seconds (adjustable) - To prevent nuisance tripping and protect sensitive
equipment against damage. Count down displayed on Display Front Panel
15 kVA (15 kW)
By boosting low voltages and stepping down high SURGE SUPPRESSION TVSS - Protects loads against high-energy Spikes and Transient Voltages

voltages, they ensure a stable output voltage. In SURGE RATING 300 Joules on all Models + Class II SPD fitted
addition, Mini SVR Series Voltage Stabilisers
OVERLOAD RATINGS Operational Overload Settings are set via the Digital Display Panel,
safeguard against all too common everyday transient with electro-mechanical overload ratings standing at
10 x Max. Current for 100 milliseconds
voltages and spikes - typically introduced into the 2.5 x Max. Current for 10 seconds
1.5 x Max. Current for 1 minute
mains supply by nearby disturbances resulting from
peak power demands or stop / start operation of NOISE FILTERING LC Filter delivering Common Mode and Differential Mode Attenuation
of 50dB at 100kHz
electrical machinery.
RESPONSE TIME Typically a 10% supply variation will be corrected within 2.5% in 0.6 seconds.
Capable of supporting all electrical and electronic
modern office and general household appliances EFFICIENCY ≥98%
(including air conditioners, computers, fridges, TV, MANUAL BYPASS Manual Bypass with Interlocking
satellite and any other electrical loads, models are
OVER / UNDER VOLTAGE Display Indication with Output Automatically Disconnected
available for situations where the incoming mains
utility supply is between 165V to 265V (H Models) OVERLOAD PROTECTION Display Indication with Output Automatically Disconnected

and, 90V to 140V (L Models). SHORT-CIRCUIT PROTECTION Automatic Tripping of the Input Circuit Breaker / Switch

LOSS OF SUPPLY Auto Restart on return of the utility supply

Principle of Operation
DIGITAL DISPLAY METERING Showing Input Volts, Output Volts & Current (Amps)

mSVR Series AC Voltage Stabilisers are intended ALARMS / INDICATIONS Restart Delay, Normal, Irregularity, Low Volt, Over Volt, & Overload
as low cost solutions, being designed around a
variable transformer. INTERFACE RS-232 - DB 9 Pin Style Port

OPERATING TEMPERATURE 0 to 45°c. Derate by 2% for each additional °c up to max. of 60°c

A solid state microprocessor based Servo-Amplifier
continuously monitors the output voltage of the MAXIMUM ALLTITUDE 1000 meters. Derate by 2.5% for each additional 500 metres
stabiliser. Should, due to an incoming voltage or load
RELATIVE HUMIDITY Suitable for indoor tropical use up to 90% RH (non-condensing)
current change, the output voltage deviate from the
required value, the Amplifier sensor instructs the EMC CONFORMANCE Complies with BS/EN 55022 & the relevant parts of BS/EN 61000 standards
servo motor to rotate the brush-gear on the variable CE CERTIFICATION CE Marked – being fully compliant with European Union Directives 2014/30/
transformer to correct the output for the deviation. EU (The EMC Directive) and 2014/35/EU (The Low Voltage Directive)

Freestanding Enclosures to IP20 (NEMA 1 Style) - BS/EN 60529

Over the years with advances in semi-conductor, CONSTRUCTION Outdoor IP54 (NEMA 3 Style) available as an option (-IP54) as well as 19”
Rack Mountable Solutions (-RM)
motor and digital technologies, our development
engineers have considerably enhanced the COLOUR RAL 1013 (Oyster White - Epoxy Powder Coat)
performance of the basic design principle. Our latest INPUT & OUTPUT
See Relevant Model Selection Tables
Servo Electronic generation of solutions deliver the CONNECTIONS
most reliable, fastest acting, highly stable and most PHYSICAL SIZES & WEIGHTS See Relevant Model Selection Tables
energy efficient operation seen in the market today.
STANDARD WARRANTY 24 Months / 2 Years

FRONT DISPLAY PANEL FLOOR STANDING MODELS ON FEET FLOOR STANDING MODELS ON CASTORS

FRONT REAR FRONT REAR

mSVR- 2021-12
© Sinalda UK Limited - Sinalda reserve the right to change any or all the specifications indicated or implied without prior notice. www.sinalda.com
mSVR SERIES - MODEL RANGES SELECT THE MOST APPROPRIATE mSVR MODEL

mSVR-H Series Models 220V to 240V

The mSVR-H Series AC Voltage Stabiliser / Power Line

Conditioner range is based on 7 different power ratings:

1 kVA (1 kW) 2 kVA (2 kW)

3 kVA (3 kW) 5 kVA (5 kW)
7.5 kVA (7.5 kW) 10 kVA (10 kW)
15 kVA (15 kW)

Suitable for all electronic and

electrical load types, these
microprocessor controlled mSVR-H MODELS - SELECTION TABLE 220V / 230V / 240V
Servo Regulators are designed to MODEL NUMBER mSVR-1H mSVR-2H mSVR-3H mSVR-5H mSVR-7.5H mSVR-10H mSVR-15H
provide a clean and regulated MAX. kVA /
1000 2000 3000 5000 7500 10000 15000
power supply, delivering many RATING kW

years of reliable protection AMPS 4.3 8.6 13.0 21.7 32.6 43.5 65.2
against the vagaries of the utility mains supply. INPUT VOLTAGE
165V to 265V AC Single Phase, 2 Wire (L,N & G/E)
WINDOW

OUTPUT
Default 230V (adjustable 220~240V) Single Phase, 2 Wire (L,N & G/E)
VOLTAGE

OUTPUT
Default ±1% (Adjustable 1% to 5%)
ACCURACY

MAX. INPUT 6.1 Amps 12.1 18.2 30.3 45.5 Amps 60.6 Amps 90.9 Amps

INPUT & OUTPUT IEC 320 C13

CONNECTIONS with 2 x IEC Power Screw Terminals
Cables

PHYSICAL SIZE 243 x 280 400 x 590 x 430 x 700 x

210 x 210 x 292 303 x 320 x 402
(W x H x D) ( mm) x 342 400 452

Front & Back View | 1 to 7.5 kVA SVR Series Models MOUNTING On Rubber Feet On Castors

WEIGHT 12 Kg 13 Kg 16 Kg 27 Kg 31 Kg 76kg 94 Kg

mSVR-L Series Models 110V to 127V

The mSVR-L Series AC Automatic Voltage Stabiliser /

Conditioner range offers power ratings:
1 kVA (1 kW) 3 kVA (3 kW)
5 kVA (5 kW)

mSVR-L MODELS - SELECTION TABLE 110V / 115V / 120V / 127V

Side View | External & Internal 1 to 3 kVA Models MODEL NUMBER mSVR-1L mSVR-3L mSVR-5L

MAX. RATING kVA / kW 1 3 5

AMPS 8.3 25.0 41.6

IP54 / NEMA 3 | Option (-IP54)
INPUT VOLTAGE WINDOW 90V to 140V AC Single Phase, 2 Wire (L,N & G/E)

mSVR Stabilisers / Conditioners

OUTPUT VOLTAGE Default 120V (adjustable110~127V) Single Phase, 2 Wire (L,N & G/E)
presented in endurable IP54 (BS /
EN 60529) / NEMA 3 free standing OUTPUT VOLTAGE ACCURACY Default ±1% (Adjustable 1% to 5%)
steel cubicles suitable for external
MAX. INPUT CURRENT 11.1 Amps 33.3 Amps 55.6 Amps
use, or more challenging internal
environments. INPUT & OUTPUT IEC 320 C13
CONNECTIONS with 2 x IEC Power Screw Terminals
Cables

PHYSICAL SIZE (W x H x D) 210 x 210 x 292 243 x 280 x 342 400 x 590 x 400
19” RACK MOUNTABLE | Option (-RM)
MOUNTING On Rubber Feet On Castors
Standard mSVR Stabilisers / WEIGHT - UNPACKED 11 Kg 18 Kg 56 Kg
Conditioners (1 to 7.5kVA models)
presented in 19” Rack Mountable
Enclosures.

mSVR- 2021-12
© Sinalda UK Limited - Sinalda reserve the right to change any or all the specifications indicated or implied without prior notice. www.sinalda.com
mSVR SERIES - FOR TODAY’S LOADS MICROPRESSOR DIGITAL SERVO CONTROL

Designed for Modern Needs Informative Front Display Panel

mSVR SERIES AC Voltage Stabilisers and Power Line

Conditioners are designed to stabilise and condition
the voltage when it fluctuates, up or down.

They are essential whenever reliable power is needed

or when normal operation of electrical or electronic
equipment is disrupted by voltage variations, sags or
spikes.
In general when suppliers of today’s modern electrical
and electronic equipment design their products they do
so knowing that most electrical utilities around the
world cannot provide or promise better than a ±5%
output voltage accuracy of nominal and as such they
design their equipment so it is able to operate
efficiently within this range.

mSVR SERIES Stabilisers and Conditioners are

specifically designed to meet the requirements of LED STATUS INDICATORS & ALARMS
today’s modern loads, being feature rich and low
Normal All is Working Fine
maintenance mains control solutions.
Time Delay Delay in the supply of power to the output on start-up
They ensure the availability of a constant voltage at a and re-engagement of the output after an irregular
level that always meets the design requirements of the event. Display Metering will show a count-down to the
load equipment, even for the most challenging of re-engagement of the output.
power environments or site loads. High Voltage Output voltage exceeds the selected over-voltage
level. The output will be automatically disconnected.
On fault clearance, the output will be automatically
re-engaged.
Low Voltage Output voltage exceeds the selected under-voltage
SYSTEM ADJUSTABLE PARAMETERS level. The output will be automatically disconnected.
On fault clearance, the output will be automatically
Password-protected access for setting re-engaged.
the Stabiliser/Conditioner’s 7 user-definable system Overload The actual current drawn on the input supply exceeds
parameters. the models stated maximum input current rating. LED
will indicate an overload condition for 60 seconds
User-adjustable parameters are- and then the output will be automatically
disconnected. On fault clearance, the output will
1. Output Voltage require a manual restart
2. Output Voltage Accuracy Menu Set system parameters and menu navigation buttons
3. Output Under-Voltage Level
DIGITAL METERING
4. Output Over-Voltage Level
Input Volt Meter Voltage level of the incoming utility mains supply
5. Input Overload level

6. Speed of Response Output Volt Meter Output Voltage delivered by the system

7. Time Delay Ammeter Power drawn by the connected load & stabiliser

sinalda
Sinalda UK has evolved to become one of the world’s
leading specialist providers of AC Voltage Stabilizers
Mini SVR SERIES
and associated power line conditioning solutions. AC Voltage Stabilisers and Power Line Conditioners
are available from -
Our Voltage Control solutions ensure our Customers –
from consumers and small businesses to the largest
of global organizations – can be certain that their vital
systems and manufacturing processes always receive
a voltage supply that is stable and clean – free from
the vagaries of the mains utility supply.
Want to learn more about us and the Clients we serve?
Check us out online at
https://www.sinalda.com/sinalda/at-your-service/

mSVR- 2021-12
© Sinalda UK Limited - Sinalda reserve the right to change any or all the specifications indicated or implied without prior notice. www.sinalda.com