LIST

No. Function Command

QUERY CLASS

1 စက်၏ version အားသိလိုလျှင် VERSION#

စက်တွင် ချိန်ထားသော setting များအားသိလို
2 လျှင် PARAM#
စက်တွင် ချိန်ထားသော Network Setting များ
3 အားသိလိုလျှင် GPRSSET#
GPS စက် လိုင်းတက်မတက် အားရှိမရှိ သိလို
4 လျှင် STATUS#
GPS စက် တည်နေရာအားအချိန်နှင့် တကွ သိလို
5 လျှင် WHERE#
GPS စက် တည်နေရာအား Google Map ပေါ်တွင် POSITION
6 ကြည့်လို့ရသည့် link ဖြင့် သိလိုလျှင် URL#
OR
7 GPS စက် တည်နေရာသိလိုလျှင် 123
8 နယ်မြေသတ်မှတ်ထားမှုများအား သိလိုလျှင် FENCE#
9 Check moving status MOVING#
APN, apnname#
OR SETTING များချိန်ညှိခြင်း
APN, apnname,user,pwd#
APN setting ချိန် ရန်
1 APN#
SERVER,mode,domainNam
e/IP,port,protocol#
Server ချိန်းရန်
2 SERVER#
GMT,A,B,C#
TimeZone ချိန်ရန်
3 GMT#
စက်ရုံမှ ထုတ်သည့် setting များအတိုင်းပြန်ထားရန်
4 FACTORY#
5 စက်ကို ပိတ်ပြီး ပြန်ဖွင့်ရန် SOS,A,phone
RESET# number
1,phone number 2,phone
SOS,D,sequence
number 3# number
1, sequence number
2,sequence number 3#
အရေးပေါ် ဖုန်းခေါ်ရန်အတွက် ဖုန်းနံပါတ် ထည့်ရန်
SOS,D,phone number#
6 SOS#
CENTER, A,phone
number#
အရေးကြီးသည့် ဖုန်းနံပါတ် တစ်လုံးထားရန် CENTER, D#

7 CENTER#
 TIMER,T1,T2#
GPS server ပေါ်သို့ data ပို့သည့် အချိန် ကန့်သတ်ရန်
8 TIMER#
GPS server ပေါ်သို့ data ပို့သည့် အကွာ DISTANCE,D#
အဝေး
9 ကန့်သတ်ရန် DISTANCE#
RELAY,A#
စက်လှမ်းရပ်ခြင်း၊ စက်ပြန်ဖွင့်ခြင်း ပြုလုပ်ရန်
10 RELAY#
FENCE,B,0,D,E,F,X,M#
နယ်မြေသတ်မှတ်ထားရန် FENCE,B,1,D,E,F,G,X,M#
11 FENCE#
SENALM,A,M#
vibration alarm သတ်မှတ်ရန် SENALM,OFF#
12 SENALM#
POWERALM,A,M,T1,T2#
Power Cut Off Alarm သတ်မှတ်ရန် POWERALM,OFF#
13 POWERALM#
BATALM,A,M#
low battery alarm သတ်မှတ်ရန် BATALM,OFF#
14 BATALM#
SOSALM,A,M#
SOS alarm သတ်မှတ်ရန် SOSALM,OFF#
15 SOSALM#
CALL,N#
GPS မှ ဖုန်းခေါ်သည့်အကြိမ်အရေတွက် သတ်မှတ်ရန်
16 CALL#
MOVING,A,R,M#
Displacement Alarm သတ်မှတ်ရန် MOVING,OFF#
17 MOVING#
SPEED,A,B,C,M#
Overspeed Alarm သတ်မှတ်ရန်
18 SPEED#
SENSOR detect the last reported position STATICREP,A,B,C,D#
when device is static STATICREP#
21
MILEAGE,A,B#
Mileage statistics
22 MIELEAGE#
Car door negatively/positively trigger
23 detection setting DOOR,X#
24 Car door alarm setting DOORALM,A,B#
25 Trigger light & Horn to find car FIND#
ADT,A,T#
Analog quantity upload setting(external
voltage upload setting) ADT,OFF#
26 ADT#
27 Query LBS location LBS#
ACCALM,A,M,T,N#
ACC alarm
28 ACCALM#
သော့ပိတ်ထားတဲ့အချိန်မှာ GPS က data ပို့ GPSDUP,A#
ရန်
29 GPSDUP#
INPUT,alert content#
IN1 alert contents setting
30 INPUT#
OUTSET,T1,T2,N#
OUTSET#
Self-defined low level output
OUTPUT#
31 STOPOUT#
OUTSET1,T1,T2,N#
OUTSET1#
Self-defined high level output
OUTPUT1#
32 STOPOUT1#
Cut off fuel/power by ACC status (send ERELAY,1#
petrol/power cutoff command first when ACC
33 ON ; execute command till ACC OFF) ERELAY,0#
EXBATALM,A,M,N1,N2,T
#
Low external power alarm EXBATALM,OFF#
34 EXBATALM#
LANG,X#
Language settings
35 LANG#
RFIDCARD,A,id1,id2.....id
RFIDCARD,D,sequence
10#
number 1…...sequence
number 10#
RFID number settings RFIDCARD,D,id1,id2.....i
d10#
36 RFIDCARD#
IDCAR,A#
RFID reader settings
37 IDCAR#
Wrong RFID alarm(Identify to unadded RFID RFIDALM,A,M#
card)
38 RFIDALM#
 Sharp turn warning
Harsh acceleration/ sudden brake deceleration
(Definition: In
alarm (Definition: Within the setting time range
the setting time range (T),
(T), the difference between the speed the device
at thewill
end
39 ofsend an alarm
the test and the if speed
it turnsat more than theofset
the beginning the SWERVE,SW,M,A,S,T#
speed
detection is (S) beyond
greater than the
the set angle (A).(A/D),
set threshold
40 Speedand and angle
the data are
equipment sendprovided
an alarm.by the SPEEDCHECK,SW,M,T,A,D#
Earlier versions GPS module.)
used G-SENSOR to provide
acceleration data, and latest version provided
ADCSET,0#
ADC calibration（Capacitive Fuel Sensor）
41 speed data from the GPS module to calculate the ADCSET,100#
average acceleration.)
OILALM,A,T1,T2,C,H,M#
Oil theft and refueling alarm（Capacitive Fuel
Sensor） OILALM,0#
42 OILALM#
 X3 COMMANDS
LIST

Reply Explanation
IMEI:351510090923668;
[VERSION]NT37_GT810_V1.
TIMER:10,10;
GPRS:ON; 2_200305_WM
HBT:3min,5min;SENDS:5;
Currently use
SOS:,,; Center Number:;
APN:CMMTM,,;
Sensorset:10,1,5,1; Defense
Server:1,gpsdev.tracksolid.c
Battery:4.05V,NORMAL;
time:10min;
om,21100,0;
GPRS:Link
Last Up; GSM Signal
Position!Lat:
TimeZone:E,8,0;
URL:http://maps.google.com
Level:Strong;
N39.90811,Lon:
/maps?q=; GPS:OFF;
ACC:OFF; Defense:OFF;
E116.38871,Course:
<02-20 14: 14>http:
e.g.
96,Speed: 4Km/h,DateTime:
//maps.google.com/maps?
GPS located:14:
2020-02-20 01-08
14: 02
q=N39.908110,E116.38871
17: 36http:
FenceType:Circle,
0 OFF,
//maps.google.com/maps?
Latitude:0.000000,
q=N22.577156,E113.91674
Longitude:0.000000,
8
radius:300m, in out:IN or
SPEED:OFF,20,100,1
OUT, alarm type:1
TTING များချိန်ညှိခြင်း
Close automatic APN and set by yourself.
eg: SERVER,1,www.ydpat.com,8011,0#
Check the current APN parameters.
SERVER,0,211.154.135.113,8011,0#
mode = 1 means set with domain name
mode = 0 means set with ip address
protocol
Check
A: = current
E or the 0 means
W;"E" means connect
sever server
parameters
eastern with "W"
time zone, TCP means
protocol
protocol = 1 means connect
western time zone;default: E server with UDP protocol
B: 0～12;time zone default: 8
C: 0/15/30/45;half
Check zone;default:
the current time zone 0
parameters
Restore to factory setting
The device would reboot in 20S after receiving the
command.
Add SOS phone number.
Delete the phone number according to the sequence
number.
Delete the matching SOS phone number.
Check the SOS phone number.
Add center phone number.
Delete center phone number.
Check the center phone number.
T1=5~18000 or 0, upload interval when ACC ON, unit:
seconds; 0 means no upload, default is 10;
T2=5~18000 or 0, upload interval when ACC OFF,unit:
seconds;
Check the0current
means parameters
no upload; default is 10;
of T1 and T2.
D=50~10000 or 0(meters), distance interval, default:
300;
Checkarea;
circle the current distance interval.
rectangle
B=ON/OFF, area
open or close fence alarm, default: OFF;
B=ON/OFF,
A=0/1;0 means
D=the latitude open or close
circlefence
connection,
of the alarm,
1 means
center; cutdefault: close;0.
off;default:
D=the
E=the latitude
longitude of the position 1;range: -90 ～
Check the
90(degree); status of
of the
the circle center;
control.
F=1～9999, the fence radius, unit: 300m;
E=the longitude
X=IN/OUT;IN: of the position
alarming when get 1;range: -180 ～OUT:
in the fence,
180(degree);
alarming when get out the fence, blank means both
F=the
alarminglatitude
when ofgetthein position
or get out2;range: -90 ～90(degree);
the fence, default:
G=the
blank. longitude of the position 2;range: -180 ～
Check the parameters of the fence.
180(degree);
A=ON/OFF,
M=0/1;way of default:
alarming, OFF;
0: GPRS only, 1: SMS+GPRS,
the latitude
M=0/1/2,
default: 1 waysupports "N/S" or
of alarming, 0: "+/-
GPRS " coming
only, 1:before it's
value;
SMS+GPRS, 2: GPRS+SMS+phone call, default: 2
Close vibrationsupports
the longitude alarm "E/W" or "+/- " coming before
A=ON/OFF,
it's value; default: ON;
Check the way
M=0/1/2, parameters of the0:alarm
of alarming, GPRS only, 1:
SMS+GPRS, 2: GPRS+SMS+phone call, default: 2;
T1=2～60 (seconds), detecting time, default: 5;
T2=1～3600
Close the power (seconds),
alarm. the minimum time charging,
default: 300;
Check the parameters of the alarm.
A=ON/OFF, default: ON;
M=0/1, way of alarming, 0: GPRS only, 1: SMS+GPRS,
default: 1;
Close the low battery alarm.
Check the parameters of the alarm.
A=ON/OFF, default: ON;
M=0/1/2, way of alarming, 0: GPRS only, 1:
SMS+GPRS, 2: GPRS+SMS+phone call, default: 2;
Close the SOS alarm.
Check the parameters of the alarm.
N=1～3, default: 3, times to dial all numbers;
A=ON/OFF, default: OFF;
Check the parameters of the dialing.
R=100～1000, moving radius, unit: meter, default:
300;
M=0/1/2, Way of alarm; 0: GPRS only, 1: SMS+GPRS,
Close
2: the moving alarm.
GPRS+SMS+phone call,over
default:
A=ON/OFF, openand
Check the status or close speed1;
the parameters alarm,
of default:
the moving
OFF
alarm.
STATICREP,A,B,C,D
B=5～600 (seconds), #time interval, default: 20
A = ON / OFF;
C=1～255(km/h), Upload
speedthelimit,
last location
default: data
100;when
SENSOR
M=0/1,
Check the detects
way motionless
of alarm, 0:
parameters of GPRS status; default: ON
only, 1: SMS+GPRS,
over speed.
B = 10 ~
default: 1. 300 seconds; time range; default: 10
seconds;
C = 0-100km / h; minimum speed of motion; default:
Query STATICREP parameters
6km / h;
D = 1-20; continuous
A=ON/OFF, monitoring
On/Off mileage times when
calculation, minimum
default: Off
speed met, default: 3 "
B=0～999999,Mileage initial value , unit: km ; default:
Query current
0, mileage mileage
return to zero
X=0,negative triggering;X=1,positive triggering,Default=0
A=ON/OFF,On/Off alarm, default: Off
B=0/1/2,0: GPRS only, 1: SMS+GPRS, 2:
GPRS+SMS+phone call, default: 1
A=ON/OFF， On/Off ADC data upload,default: Off
B=5～3600，Default: 600s; Upload time interval,unit:
seconds,default: off
Turn off analog data upload
Query the AD1 port parameters;
A=ON/OFF default: :OFF;
M=0/1；way of alarming，0 GPRS，1 SMS+GPRS；
default: ：1
T=5~60 s；default: 10 s
A=ON/OFF
N=0~2
Query the ; parameters
; 0：ACC
set status alarm；1：ACC OFF alarm；2：
ON：Upload location data 0；
ACC ON alarm；default: in fiexed time when GPS is
not positioning/sleeping or the filter data is restricted.
OFF: Don't upload location data in OFF and not
Query the set
positioned, parameters
sleep and static status；default: OFF
Door alert contentrange
T1：Output time, 0.1S-172800s (0 means long
setting
output, relay always connected)；
Query IN1 alert
T2; output content
interval, range 0.1-172800s (48 hours) （0
means no output once input done ) ;
N——output times; range 0-65536, 0 means keep
cycling；
Query the set parameters
The following command can't be send only if the
T1：Output
Output based time, range:
onset
the 0.1S-172800s (0 means long
parameters are inmode set by OUTSET
advance: command
output; relay is connected)；
Stop current output and back to default (OFF) status;
T2; Output time interval，range: 0.1-172800s（48
default:OUTSET,0.5,0,1#；
hours） （0 means no more output）；
N——output times; range: 0-65536,0 means keep
cycling;
Query the set parameters
Following command can't be sent if only parameters
Output
are set based on the mode set by OUTSET command
in advance:
Stop current output and back to default (OFF) status;
default: OUTSET,0.5,0,1#
Cut off power/fuel
A=ON/OFF; default: OFF
Restore power/fuel
M=0～1; 0 = GPRS, 1 = SMS+GPRS; default: 1
N1=10-360; default: 115, means 11.5V
N2=10-360; default: 125, means 12.5V
Turn off low external battery alarm
T=1-300; default: 10 (second)
Check the current parameters.
X = 0/1; 1 Chinese, 0 English; English version
Default: 0
Back to currently set language
Add RFID number.(Set a maximum of 10 numbers)
Delete the RFID number according to the sequence
number.
Delete the matching RFID number.
Check the RFID number.
A=ON/OFF.On/Off the RFID card reader,default:
OFF
Query the set parameters
A=ON/OFF,On/Off alarm, default: Off
B=0/1,0: GPRS only, 1: SMS+GPRS, default: 0
Query the set parameters
 SW=ON/OFF,On/Off alarm, default: Off
M=0/1/2,alarm reporting method, 0: only GPRS, 1:
GPRS+SMS, 2: GPRS+SMS+CALL,default:
SW=ON/OFF,On/Off alarm, default: Off 0
A=10～180(degrees),trigger alarm Angle
M=0/1/2,alarm reporting method, 0: only GPRS, 1: threshold,
A=0~3;
default 0=Turn
GPRS+SMS, 30 2: off oil theft and refueling alarm,
GPRS+SMS+CALL,default: 0 1=Turn on
oil theft alarm, 2=Turn
S=10～200(km/h),trigger
T=1～30, on oil refueling
alarm
detection duration, Speed
unit: alarm, 3=Turn
default:on4
threshold,
seconds,
M,T,A,D# oil theft
default 60and refueling
A=10～300(km/h),threshold alarm; default: 0
of Harsh acceleration speed
T1=0～3600(seconds);
T=1～30
difference,
Send detection
the commond detection
duration, thetime
default 30 when unit: interval(ACC
seconds,
tank ON);
is outdefault
of gas 3
default: 5s
D=10～300(km/h),difference threshold for sudden brake
Send the commond
speed, when
T2=0～3600(seconds);
deceleration the50tank
detection
default timeisinterval(ACC
full OFF);
default: 5s
C=1-300(numbers); the back up number of the latest
liquid level
Turn off oil percentages ; default:
theft and refueling alarm12
H=1-10000; Liquid level percentage difference,
Check the default:
unit:0.01%; current1000
parameters.
M=0~3,alarm reporting method, 0: only GPRS, 1:
GPRS+SMS, 2: GPRS+SMS+CALL,3: GPRS+CALL;
default: 1
g,Default=0