Scribd
Upload
14 views

POM Data Sheet

The document provides a technical datasheet for POM plates/rods, highlighting their properties such as high mechanical strength, self-lubrication, and temperature resistance ranging from -40℃ to 110℃. It includes specifications, performance metrics, and typical applications in various industries. Additionally, it contains disclaimers regarding the reliability of the data and the responsibilities of the buyer or end user.

Uploaded by

Poomalai Pachamuthu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
14 views

POM Data Sheet

The document provides a technical datasheet for POM plates/rods, highlighting their properties such as high mechanical strength, self-lubrication, and temperature resistance ranging from -40℃ to 110℃. It includes specifications, performance metrics, and typical applications in various industries. Additionally, it contains disclaimers regarding the reliability of the data and the responsibilities of the buyer or end user.

Uploaded by

Poomalai Pachamuthu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Document code: TYGFZ-WI-

QA-003

POM plates/rods TECHNICAL


Polyformaldehyde board/rod DATASHEET

product description

POM plate/rod is a thermoplastic plate made by extrusion molding with POM as the base material. It has high mechanical strength, self-
lubrication and other properties, easy processing and use temperature in-40℃-110℃.

characteristic Typical applications


High mechanical strength machine part

Self-lubrication is good manufacturing installation

High rigidity, high hardness, wear electric products


resistance

pigment specifications
white Plate: thickness x width x length

black 6-200mm x 1000/1220mm x

2000mm bar: diameter x

length

6-200mm×1000mm

Performance and test conditions test method unit represe


ntative
value
mechanical property
The notch impact strength of cantilever ISO 180 KJ/M 2 5
beam is 23℃
Yield tensile strength, 23℃,50mm/min ISO 527 Mpa 65
Fracture elongation, 23℃,50mm/min ISO 527 % >1 5
Bending strength, 23℃,2mm/min ISO 178 Mpa 90
Bending modulus, 23℃,2mm/min ISO 178 Mpa 2400
shore hardness D ISO 868 - 80

hot property
Thermal deformation temperature (1.8 ISO 75 ℃ 110
Mpa)
melting point - ℃ 165
Long-term working temperature - ℃ 80

Page A1 of 2
Short working temperature - ℃ 100
thermal conductivity DIN52612-1 W/(K-M) 0.33
linear expansion coefficient DIN 53752 10-6/K 130

Page A1 of 2
Document code: TYGFZ-WI-
QA-003

Electrical properties

dielectric strength IEC 60243 KV/mm 40


Dielectric loss coefficient IEC 60250 - 0.003
volume resistivity IEC 60093 Ω.cm ≥10 13
sheet resistance IEC 60093 Ω ≥10 13
dielectric constant IEC 60250 - 3.7

Other performance

density ISO 1183 g/cm 3 1.4


Water absorption rate, ISO 62 % 0.25
equilibrium 23℃/50%RH
combustibility UL 94 - HB
uvioresistant - - -
Non-toxic and harmless EEC 90/128 FDA - +
Adhesion - - +
friction factor GB/T 3960 - -
Chemical properties

acid fastness 23℃65%RH - +


resistance to alkali 23℃65%RH - +
Water resistant to acid and - - +
alkali
- - 0
Resistant to chloric acid and
alkali - - +

Resistant to aromatic compounds 23℃65%RH - +

Resistant to ketones 23℃65%RH - +

Water resistance

remarks:

1. "+" is tolerable, "-" is not tolerable, and "0" depends on the situation

2. The above data are obtained from the test data of plate/rod materials, and the performance of each batch of
products is not completely consistent, so the uniqueness of the data is not guaranteed

Disclaimer

The above information is provided with good faith. Tongyi Corporation shall not be liable for any issues that

may arise during the processing of any product. Furthermore, Tongyi Corporation makes no warranties or

representations regarding the information or product descriptions provided and expressly disclaims all implied

warranties, representations, and conditions, including but not limited to all quality guarantees and

conditions as well as applicability for specific purposes. The responsibility for the use, storage, handling,

and disposal of the products described herein lies with the buyer or end user.

Page A1, of 2 pages

You might also like