Scribd
Upload
28 views2 pages

PSA10 Overcurrent Earth Fault Relay Datasheet

The document describes the Overcurrent and Earth Fault Relay (PSA10), an educational tool for investigating the protection and monitoring of electrical systems, supplied with TecQuipment’s Protection and Relay Test Set (PSL50). It features a robust design, comprehensive user guide, and allows for various tests on transformers and transmission lines. The relay supports multiple functions including thermal overload protection and broken conductor detection, making it suitable for laboratory environments.

Uploaded by

Suhaili Yusof
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
28 views2 pages

PSA10 Overcurrent Earth Fault Relay Datasheet

The document describes the Overcurrent and Earth Fault Relay (PSA10), an educational tool for investigating the protection and monitoring of electrical systems, supplied with TecQuipment’s Protection and Relay Test Set (PSL50). It features a robust design, comprehensive user guide, and allows for various tests on transformers and transmission lines. The relay supports multiple functions including thermal overload protection and broken conductor detection, making it suitable for laboratory environments.

Uploaded by

Suhaili Yusof
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Electrical Power Systems

Ov e rc urren t an d Earth Fault R e lay


P SA1 0
Supplied with TecQuipment’s Protection and Relay Test Set (PSL50) to enable investigations into
protection and monitoring of transformers, transmission lines and distribution schemes

K ey f e at u res
• Modern industrial overcurrent and earth fault relay presented in an educational format
• Supplied with TecQuipment’s Protection and Relay Test Set (PSL50) and as an optional ancillary to other
selected power systems products
• Held in robust enclosure with carrying handle
• Enables wide variety of tests and investigations
• Connections via safety sockets
• Demonstrates the latest relay technology

TecQuipment Ltd, Bonsall Street, long eaton, Nottingham NG10 2AN, UK


tecqu ipment. c o m +4 4 115 972 2611 [email protected]

PE/JSL 0422 Page 1 of 2


Ov e rc urren t an d Earth Fault R e lay
P SA1 0

Description Standard Features


An entry-level three-phase and earth fault overcurrent • Supplied with comprehensive user guide
relay presented in an educational format. Supplied with
• Five-year warranty
TecQuipment’s Protection and Relay Test Set (PSL50), the
relay enables investigations into protection and monitoring • Manufactured in accordance with the latest European
of transformers, transmission lines and distribution Union directives
schemes. The relay is housed in a robust enclosure with
carrying handle. The module mounts on the desk area of Learning outcomes
the Protection and Relay Test Set, and connects to the test
Investigations into the performance and characteristics of
set using a multi-core cable and safety leads.
an industrial overcurrent and earth fault relay.
This relay is also an optional ancillary for selected
products in TecQuipment’s Power Systems range. O per ating C o nd itio ns
The relay module is based on the Micom P122 industrial O perat ing enviro nment:
relay. The lecturer or student sets up different fault circuits Laboratory environment
on the Protection and Relay Test Set. They then use the
Storage temperature range:
keypad and display on the relay module to program it to
the settings needed for the tests. They can also use the –25°C to +55°C (when packed for transport)
relay support software (supplied with the Protection and O perat ing t emperat u re ra nge:
Relay Test Set) and a suitable computer (computer not
included) to program the relay module. The relay module +5°C to +40°C
is then connected to the fault circuits so tests can be O perat ing relat ive hu midit y ra nge:
performed. 30% to 95% (non-condensing)
Most tests are performed using single relays. However,
there are enough connections on the Protection and Relay Specifications
Test Set to test two relay modules at the same time. Dimensio ns:
The main functions of the Overcurrent and Earth Fault • 300 mm x 550 mm x 278 mm
Relay include:
• Packed 0.16 m3
• Three-phase earth and overcurrent: three independent
Weight:
stages. The first stage selectable from any of 12 IDMT
curves; the remaining stages having a direct time • Net 10 kg
characteristic (ANSI 50/51 and ANSI 50N/51N). • Packed 30 kg
• High impedance restricted earth fault (ANSI 64N) Cu rrent:
• Thermal overload protection (ANSI 49) 1 A (a.c.)
• Undercurrent (ANSI 37) Freq u ency:
• Negative-phase sequence overcurrent: two 50 or 60 Hz
independent stages (ANSI 46) Accu racy:
• Broken conductor detection (ANSI 46BC) ±5%
• Selectable blocking O perat ing t ime:
• Trend, fault and disturbance records Typically 10 ms to 25 ms

• Circuit monitoring
Connection to the experimental circuit is via current
transformers with ratio to suit the inputs of the relay. This
provides an effective demonstration of the effect of current
and voltage transformer ratio, connection and rating on
protective relays.

TecQuipment Ltd, Bonsall Street, long eaton, Nottingham NG10 2AN, UK


tecqu ipment. c o m +4 4 115 972 2611 [email protected]

PE/JSL 0422 Page 2 of 2

You might also like