SD250.

1 D
OWNER´S MANUAL
Dear customer,
Congratulations on acquiring your SounDigital!
You've just purchased a product of high quality and technology. The SounDigital products are developed to assure
maximum efficiency and reliability to your sound system.

Class D Amplifiers:
The main characteristics of Class D amplifiers are: audio quality, efficiency, versatility and compact design. Here are the
advantages of these characteristics:

Audio Quality – Class D amplifiers used to have a limited response in the past and they used to have a worse
performance regarding higher frequencies than Class AB amps, despite being more efficient. Introducing new
technologies, SounDigital developed a Class D amplifier superior to the Class AB ones in efficiency and performance.

Efficiency – The SounDigital Class D amplifiers have a total efficiency (power source + output) higher than 70%,
assuring a battery consumption and a heating lower than the expected.

Versatility of uses –The flat response of all the frequencies of SounDigital amplifiers allows them to be used in all the
kinds of systems: SPL, Sound Quality, and Pancadao, meeting the needs with extreme quality.

Compact design – The high efficiency and technology allow our amplifiers to be really compact, making it easy to install
them in vehicles where you have limited space.

IMPORTANT INFO
Read this manual and follow its instructions and information carefully. It contains extremely important information to have your
amplifier working properly. If you feel the need to contact our Tech Support, you can reach our technicians through the e-
mail . [email protected] .

We recommend the use of SounDigital original accessories for a batter performance. The crossovers, power supplies
and voltmeters offered by SounDigital follow the same quality standards as our amplifiers, assuring an excelent quality
and high power sound system to our customers.

To know our complete line of amplifiers and accessories, visit www.soundigitalusa.com .

TECHNICAL SPECS
SPECS SD250.1D SD250.1D
Low Pass crossover Fix @ 80Hz
RMS Power @ 12.6V 1 x 250WRMS High Pass crossover Fix @ 80Hz
RMS Power @ 14.4V 1 x 300WRMS Standby current draw <0.1A
Peak Music Power 1 x 3000W Maximum current draw

Eficiency 95%
Musical current draw
Impedance versions 1Ω or 2Ω
Frequency response 5Hz a 20kHz (+/- 3dB) Net weight 0.3Kg
Input sensivity 0.5V to 6V Gross weight 0.4Kg
Operating voltage 10VDC to 16VDC Lenght 115mm (4.5")
Dumping factor 400 Width 100mm (3.9")
THD 0.01% THD+N @ 60W Heigth 35mm (1.4")

Minimum capacity of the battery 30A

Recommended fuse/circuit breaker 30A
Size of recommended power cable 6mm²
Size of recommended speaker cable 1.5mm²
Wiring connections

HIGH IN

+12V
RCA INPUT
REMOTE
GND
GAIN

SPEAKER CROSSOVER
OUTPUT
+
-

Warning: Never use the high in input and RCA input together. If the main unit have
RCA output, use only this ouput, if doesn´t have, use the high output.
 Manual SD250.1 Revisão 1.2
Protection and monitoring systems

Soundigital amplifiers are micro-controlled. You can check the diagnostic of the monitoring of the
electronic functions through the LED Installed inside of the amplifier.

3 Blinks
It indicates the input tension is under 10 volts.

4 Blinks
It indicates a short circuit or low output impedance.
LIMITED WARRANTY
SounDigital warrants the original purchaser that this product shall be free of defects in materials an
workmanship for a period of twelve (12) months from the original date of purchase. Some countries have
extended warranty in case the product is installed by an authorized dealer. This warranty is not transferrable
and applies only to the original customer from an authorized SounDigital dealer.
Ÿ Defect or problem caused by misuse of the product;
Ÿ Incorrect installation or non-conformity with the Manual;
Ÿ Maintenance made by unauthorized personnel;
Ÿ Alteration or removal of the seal/serial number;
Ÿ Exposure to adverse conditions (weather, humidity, etc);
Ÿ Damage caused by fall, impact or natural depreciation, caused by transport and/or handling, risks, or
smashings;
Ÿ Product was purchased more than 12 months ago.

Warranty covers:
Ÿ Component or material with manufacturing defects;
Ÿ Workmanship/service needed to repair the equipment;
Ÿ If you need service on your SounDigital amplifier, send it to SounDigital's Amplifier Repair Center through
an authorized SounDigital dealer (must be accompanied by proof of purchase);
Ÿ Any extra information you can get by contacting us at the e-mail address: [email protected];
Ÿ In case of manufacturing defect or bad quality of raw material the max compensation will be the
replacement of the product, not allowing any kind of compensation payment;
Ÿ New modifications/iterations on a product don't obligate the manufacturer to modify products formerly
produced.