Item Description Unit Qty Rate Amount

A. Sub Structure
I. Excavation and Earth Work
1.1 Site clearing excavation to remove top soil to an averagedepth of 200mm m2 105.00 25.00 2,625.00
1.2 Bulk excavation in ordinary soil to remove Vegetation roots to a depth not
exceeding 1560mm starting from cleared surface.
m3 105.00 180.00 18,900.00
1.3 Pit excavation in ordinary soil for footing to depth of 1500 mm; starting
from cleared surface. m3 40.50 150.00 6,075.00
Ditto as item No. 1.3 to a depth of over 1500 mm but not exceeding
1.4
3000mm. m3 40.50 250.00 10,125.00
1.5 Trench excavation in ordinary soil for masonry foundation to depth of 1000
mm from reduced level. m3 31.50 180.00 5,670.00
1.6 Fill around footing columns with selected materials brought from out side
well rolled and compacted in layers not exceeding 200 mm thick. m3 61.20 350.00 21,420.00
1.7 Fill under hard core with selected materials brought from out side well
rolled and compacted in layers not exceeding 200 mm thick. m3 16.00 280.00 4,480.00
1.8 Cart away surplus excavated material to appropriate tip. m3 238.50 200.00 47,700.00
1.9 250mm thick basaltic stone hardcore well rolled consolidated and blended
with crushed stone. m2 85.00 320.00 27,200.00
Total Carried To Summary 144,195.00
II.Concrete Work
2.1 50mm thick lean concrete in class C-5 with minimum Cement content of
150 kg/m3.
a) Under isolated footing pad m2 27.00 450.00 12,150.00
b) Under beam m2 18.60 450.00 8,370.00
c) Under masonry m2 39.00 450.00 17,550.00
2.2 Reinforced concrete quality C-25,minimum cement content of 360 kg of
cement/m3 filled in to form work and vibrated around rod reinforcement
(formwork and reinforcement measured separately)

a) in isolated footing pad m3 8.11 6,800.00 55,161.60

b) in foundation column m3 1.80 6,800.00 12,240.00
c) In grade beams m3 4.96 6,800.00 33,728.00
d) In 100 mm thick ground floor slab m2 85.00 680.00 57,800.00
2.3 10mm thick Styrofoam joint filler board 100mm wide in movement joint
between edge of concrete slab and grade beams
ML 75.00 65.00 4,875.00
2.4 Supply and fix in position timbered or steel or a combination of two
Formwork; sufficient to contain the wet concrete with out leakage. Enough
to support temporary loading and pressure from placing compaction or
vibration without displacement or appreciable deflection.

a) in isolated footing pad m2 24.96 350.00 8,736.00

b) in foundation column m2 36.00 350.00 12,600.00
c) In grade beams m2 49.60 350.00 17,360.00
2.5 Steel bar reinforcement according to structural drawings. Reinforcement
shall be free from dirt, oil, grease, paint, retarders, etc and any other
substances which may affect the reinforcement and concrete bondage
(price include cutting, bending, placing in position)

a) Ø 8 mm Deformed bar Kg. 649.18 150.00 97,377.41

b) Ø 12 mm Deformed bar Kg. 156.00 150.00 23,400.00
c) Ø 14 mm Deformed bar Kg. 1,813.98 150.00 272,097.00
d ) Ø 16 mm Deformed bar Kg. 244.83 150.00 36,723.84
Total Carried To Summary 670,168.85
III.Masonary Work
3.1 500 cm. Thick trachytic or equivalent masonry for foundation wall below
ground level bedded in 1:4 cement mortar to a depth not exceeding
2000mm. m3 31.50 2200 69,300.00
3.2 500 cm. Thick trachytic or equivalent masonry for foundation wall above
ground level bedded in 1:4 cement mortar .
m3 31.50 2200 69,300.00
Total Carried To Summary 138,600.00
IV.Septic tank
5.1 Excavation
Pit excavation in ordinary soil to remove Vegetation roots to a depth not
exceeding 3000mm starting from cleared surface. m3 36.75 350.00 12,862.50
Cart away surplus excavated material to appropriate tip. m3 45.94 120.00 5,512.50
5.2 Concrete
Item Description Unit Qty Rate Amount
top slab 150mm thick m2 9.00 720.00 6,480.00
bottom slab 150mm thick m2 9.00 720.00 6,480.00
Shear wal m3 7.20 6,000.00 43,200.00
5.3 Reinforcement bar
Ø 10mm Deformed bar Kg. 356.63 150.00 53,493.90
Ø 12mm Deformed bar Kg. 170.59 150.00 25,588.22
Ø 14mm Deformed bar Kg. 232.19 150.00 34,828.42
5.4 Formwork
top slab m2 9.00 350.00 3,150.00
Shear wal m2 72.00 350.00 25,200.00
Total Carried To Summary 216,795.54
Sub Total Of A Carried To Summary 1,169,759.39
B. Super Structure
I. Concrete Work
1.1 Reinforced concrete class C-25 with minimum Cement content of 360kg/m 3
well spread leveled. And filled into formwork and vibrated around steel
reinforcement (steel and formwork measured separately)

a) In elevation columns. m3 6.48 6,500.00 42,120.00

b) In intermediate beams. m3 9.60 6,500.00 62,400.00
c) In top tie beams m3 3.60 6,500.00 23,400.00
d) In 150 mm thick solid slab m2 170.00 1,000.00 170,000.00
e) In concrete stair. m3 4.60 6,500.00 29,900.00
f) In concrete gutter. m3 4.30 6,500.00 27,950.00
1.2 Supply & Cut in size and fix in position timbered or steel or a combination
of two Formwork; sufficient to contain the wet concrete with out leakage.
Enough to support temporary loading and pressure from placing
compaction or vibration without displacement or appreciable deflection.

a) In elevation columns. m2 129.60 400.00 51,840.00

b) In intermediate beams. m2 120.00 400.00 48,000.00
c) In top tie beams m2 52.00 400.00 20,800.00
d) In 150 mm thick solid slab m2 170.00 400.00 68,000.00
e) In concrete stair. m2 65.00 400.00 26,000.0
f) In concrete gutter. m2 67.20 400.00 26,880.00
1.3 Steel bar reinforcement according to structural drawings. Reinforcement
shall be free from dirt, oil, grease, paint, retarders, etc and any other
substances which may affect the reinforcement and concrete bondage
(price include cutting, bending, placing in position)

a) Ø 8mm Deformed bar Kg. 567.05 150.00 85,057.15

b) Ø 10mm Deformed bar Kg. 1,169.83 150.00 175,474.80
c) Ø 12mm Deformed bar Kg. 238.11 150.00 35,716.90
d) Ø 14mm Deformed bar Kg. 1,451.18 150.00 217,677.60
e) Ø 16mm Deformed bar Kg. 2,053.38 150.00 308,006.40
Total Carried To Summary 1,419,222.85
II. Block Work
2.1 Class "B" 20cm thick external HCB wall which can satisfy the designed
strength , bedded in cement mortar (1:3).Price shall include mortar bed
m2 - - -
2.2 Class "B" 15 cm thick internal HCB wall which can satisfy the designed
strength , bedded in cement mortar (1:3).Price shall include mortar bed
m2 475.20 600.00 285,120.00
Total Carried To Summary 285,120.00
III. Roofing
3.1 Supply &l ay Harvey tile roofing fixed to timber purlin and including
roof ridge cover, hooks and all necessary accessories for
secured installation. m2 90.00 2500.00 225,000.00
3.2 15cm thick light weight concrete over concrete
slab with 2% slope to wards down pipe . m2 12.00 300.00 3600.00
3.3 3cm thick cement screed over light weight concrete . m 2
12.00 280.00 3360.00
3.4 Bitumat with 4mm thick sand finished or
equivalent water proofing material . m2 12.00 1680.00 20160.00
Total Carried To Summary 252,120.00
IV. Carpentry & Joinery
Item Description Unit Qty Rate Amount
All structural timber shall be well seasoned and free of harmful
defects and painted two coats of anti-termite solution. Each truss
shall be firmly fixed to concrete beams with 8mm plain bars.
4.1 Supply & placing Eucalyptus truss member of sizes
a) Upper and Lower chord Dia. 100 mm ML 146.00 45.00 6,570.00
b) Vertical and Diagonal intermediate chord Dia. 80mm - 90 mm ML 84.00 35.00 2,940.00
4.2 Supply & fix 70 x 50 mm Australian purlin at c/c 900mm ML 210.00 85.00 17,850.00
4.3 Supply & fix gypsum board on roof ceiling m2 98.00 750.00 73,500.00
4.4 Supply and fix MDF wooden doors of 40mm thick both side covered with
4mm thick Kerero ply wood and wanza wood frame price includes
approved quality cylindrical lock, hinges and three coats of varnish paint.
other necessary works all according to detail drawings.
a) size (1100 x 3000) mm No. - - -
b) size (900 x 3000) mm No. - - -
c) size (800 x 3000) mm No. 8 14,400.00 115,200.00
d) size (700 x 3000) mm No. 3 12,600.00 37,800.00
Total Carried To Summary 253,860.00
V. Aluminum Work
Supply and fix Anodized and polished aluminum doors and windows
fabricated with 2mm thick bronze color aluminum profiles including, the
5.1 best quality cylinderical door locks, all necessary iron mongaries, glass
stopper and other related works. Price shall also include 5 mm clear glass
Glazing and all the necessary works.
Door.
D (2600 x 3000) mm No. 1 78,000.00 78,000.00
D (2000 x 3000) mm No. 2 60,000.00 120,000.00
D (1500 x 3000) mm No. 2 45,000.00 90,000.00
D (1100 x 3000) mm No. 1 33,000.00 33,000.00
D (800 x 3000) mm No. 1 24,000.00 24,000.00
D (700 x 3000) mm No. 1 21,000.00 21,000.00
Windows.
w (1200 x 2000) mm No. 3 24,000.00 72,000.00
w (1000 x 2000) mm No. 4 20,000.00 80,000.00
w (600 x 2000) mm No. 4 12,000.00 48,000.00
5.2 Supply and Fix Stair case hand rail and gard rail made of aluminum profiles
consisting of baluster and handrail all as per shown on the detail drawing.
Price shall include fixing accessories and other necessary works.
ML 22.40 3,200.00 71,680.00
Total Carried To Summary 637,680.00
VI.Finishing
Finishing work include all surface pre-cleaning, preparation and post
6.1 cleaning.
Apply two coats of cement mortar plaster wall finish to external surface of
hollow block concrete wall with mix ratio ( 1:3 ) m2 346.00 320.00 110,720.00
6.1 Apply three coats of cement mortar plaster to internal hollow block
concrete wall surface with mix ratio (1: 3 )
m2 604.40 320.00 193,408.00
6.2 Apply two coats of cement mortar plaster to internal columns, intermediate
beams and top tie beams with mix ratio ( 1:2 )
m2 86.00 320.00 27,520.00
6.3 Ditto as item 5.4 but to bottom side of the slab
m2 160.00 320.00 51,200.00
6.4 Ditto as item 5.4 but for concrete stair case. m 2
16.72 320.00 5,350.40
6.5 Supply and lay 8 mm thick non slippery colored ceramic floor tile . Price
includes cement mortar backing, white cement grouting and all the
necessary work. m2 160.00 2,500.00 400,000.00
6.6 Supply and lay 15 x 15 x 6 mm thick white ceramic wall tile for toilet area.
Price includes cement mortar backing, white cement grouting and all the
necessary work. m2 105.00 2,500.00 262,500.00
6.7 Provide and lay White Welega Marble tile . Joints grouted in cement and
sand mortar (mix.1:3)
6.8 a) 30mm thick white Welega marble tile . m2 12.00 5500.00 66,000.0
6.9 b) 300 X 30mm thick for stair tread . ml 42.00 1900.00 79,800.0
6.11 c) 160 X 20mm thick for stair riser . ml 42.00 1900.00 79,800.0
6.12 100 x 20 mm thick ceramic skirting stuck to wall. price includes cement
sand mortar backing (mix. 1:3) and all the necessary work.
ml 123.00 450.00 55,350.00
Item Description Unit Qty Rate Amount
6.13 333 x 30mm thick white marble window sill bedded with cement sand
mortar (mix. 1:3) ml 19.40 1,900.00 36,860.00
6.14 333 x 30mm thick white marble door sill bedded with cement sand mortar
(mix. 1:3) ml 17.20 1,700.00 29,240.00
Total Carried To Summary 1,397,748.40
VII Painting
7.1 Apply three coats of approved type plastic paint to all external wall m2 346.00 80.00 27,680.00
7.2 surfaces.
Apply three coats of approved type plastic paint to all internal wall m2 604.40 80.00 48,352.00
7.3 surfaces.
Apply two coats of approved type plastic paint to all internal columns,
intermediate beams and top tie beams surfaces. m2 86.00 80.00 6,880.00
7.4 Apply three coats of approved type broken White plastic paint to all bottom
side of the slab m2 160.00 80.00 12,800.00
7.5 Ditto as item No. 8.2 but for concrete stair case. m2 16.72 80.00 1,337.60
Gypsum work
7.6 Apply approved type Gypsum work to all internal wall surfaces. m2 604.40 150.00 90,660.00
7.7 Apply approved type Gypsum workto to all internal columns, intermediate
beams and top tie beams surfaces. m2 86.00 150.00 12,900.00
7.8 Apply approved type Gypsum work to all bottom side of the slab surfaces.
m2 160.00 200.00 32,000.00
7.9 Apply approved type Gypsum work to all stair case surfaces.
m2 16.72 200.00 3,344.00
Total Carried To Summary 235,953.60
ITEM. DESCRIPTION OF WORK UNIT QTY. RATE AMOUNT

IX. ELECTRICAL WORKS

Supply and install

1.0 DISTRIBUTION BOARDS

(TYPE SIEMENS, ABB, LEGRAND OR EQUIVALENT
APPROVED)

Short circuit triping characterstics of each circuit

breaker inside distribution board shall be as specified
below:-
CB Rating (A) Short circuit rating (KA)
6 - 25 6
32 - 80 10

1.1 Flush mounting distribution board MDB-GO with

lockable door and including phase, neutral and
earth-bar of 80A rating and consisting of :-
1 pc main ACB of 63A/3P
2 pc main ACB of 25A/3P
4 pc main ACB of 25A/1P
4 pc main ACB of 16A/1P
5 pc main ACB of 10A/1P
No. 1 24,000.00 24,000.00
1.2 Flush mounting distribution board DB-F1 & DB-F2
with lockable door and including phase, neutral and
earth-bar of 32A rating and consisting of :-

1 pc main ACB of 25A/3P

1 pcs ACB ACB of 25A/1P
9 pcs ACB ACB of 16A/1P
3 pcs ACB ACB of 10A/1P No. 2 21,000.00 42,000.00
2.0 LOW VOLTAGE SYSTEM EARTHING
2.1 Low voltage system earthing consisting of
(2400x16mm) copper bond earthing rod inside
manhole (measured else- where ) including all
connecting accessories. No. 1 1,850.00 1,850.00
2.2 Low voltage system earthing consisting of 1 x
16mm² bare copper conductor from the KWH-meters
earthinpoint to the earthing rod manwhole.
m 35 250.00 8,750.00

3.0 CONDUITS AND PIPES

3.1 PVC of 50mm diameter m 85 53.00 4,505.00
3.2 PVC of 32mm diameter m 120 43.00 5,160.00
4.0 MANHOLE
ITEM. DESCRIPTION OF WORK UNIT QTY. RATE AMOUNT

4.1 Manhole in brick or masonry , internally of

500x500x700mm including reinforced concrete
cover with lifting lug.
No. 2 2,200.00 4,400.00
4.2 Ditto, but with 400x400x700mm. No. 2 1,800.00 3,600.00
5.0 FEEDER CABLES

5.1 PVC sheathed PVC insulated power cable type

SIEMENS NYY 0.6/1KV or equivalent to be drawn
inside cement or PVC conduit (measured elsewhere)
and of :-
(a) 5x16mm² m 45 850.00 38,250.00
(b) 5x4mm² m 85 450.00 38,250.00
6.0 LIGHT POINTS
6.1 Flush mounted light points fed through PVC
insulated conductors of 3x2.5 mm² inside rigid
PVC conduits of 20 mm diameter , including junction
boxes with covers insulating screw cap connectors.
No. 45 185.00 8,325.00

7.0 SWITCHES
.
(TYPE LEGRAND DÉCOR OR EQUIVALENT
APPROVED )

7.1 Flush mounting single switch, No. 10 65.00 650.00

7.2 Flush mounting double switch No. 8 100.00 800.00
7.3 Flush mounting two-way switch No. 7 200.00 1,400.00
8.0 SOCKET OUTLET POINTS

8.1 10-16A/1P socket outlet points fed through PVC

insulated conductors of 3x2.5 mm² inside rigid PVC
conduits of 20mm diameter including junction boxes
with covers, and insulating screw cap connectors all
for flush mounting and screw type junction boxes for
socket outlets No. 32 185.00 5,920.00
8.2 Ditto, but 20A/1P socket outlet point fed through PVC
insulated conductors of 3x4.0 mm² inside rigid PVC
conduits of 25mm diameter including junction boxes
with covers, and insulating screw cap connectors all
for flush mounting .
NO 5 225.00 1,125.00

9.0 SOCKET OUTLETS

(TYPE LEGRAND DECOR OR EQUIVALENT

APPROVED )
9.1 Flush mounting socket outlet of 10-16A/1P No. 28 75.00 2,100.00
9.2 Flush mounting socket outlet of 20A/1P. No. 4 225.00 900.00
9.4 Flush mounted water proof socket outlet with switch
for water heaters. No. 4 250.00 1,000.00

10.0 TV SYSTEM
ITEM. DESCRIPTION OF WORK UNIT QTY. RATE AMOUNT

(TYPE LEGRAND DECOR OR EQUIVALENT)

10.1 TV points fed through twin flat TV cables inside

rigid PVC conduits of 20mm diameter including
junction boxes with covers, insulating screw cap
connectors , and flush mounted terminal.
No. 8 300.00 2,400.00
10.2 TV outlets No. 8 75.00 600.00

11.0 TELEPHONE POINTS

11.1 Telephone points fed through twisted pair UTP cable
inside PVC conduit of 20mm diameter. No. 8 175.00 1,400.00
11.2 RJ 11 outlet . m 200 12.00 2,400.00
11.3 Telephone box 100x100x40mm. No. 1 175.00 175.00

12.0 BELL CALL SYSEM

12.1 Bell call point fed through PVC insulated conductors No. 1 250.00 250.00
of 2x1.0mm2 inside PVC conduit of 13mm diameter,
12.2 Bell push button with bell for flush mounting. No. 1 250.00 250.00
including junction boxes with covers, insulating screw
12.3 cap
Bellconnector
push button forflush
all for flushmounting.
mounting. No. 4 265.00 1,060.00
12.4 Waterproof Bell push button for flush mounting. No. 2 265.00 530.00
12.5 Bell call system (Bell indiactor) with 12 numbers. No. 1 1,500.00 1,500.00

13.0 LIGHT FITTING AND LAMPS

(Specified or Equivalent)
13.1 TYPE 1
PRECIOSA ELEGANT LIGHT CHANDLER
AR5022/00/024 24x40W LAMP. No. 2 2,200.00 4,400.00
13.2 TYPE 2
MASSIVE 80002/05/01 WITH 3xE14/MAX. 40W LAMP. No. 2 2,100.00 4,200.00
13.3 TYPE 3
MASSIVE 80002/02/01 WITH 1xE14/MAX. 20W LAMP. No. 6 1,100.00 6,600.00
13.4 TYPE 4
LOMBARDO LB81221 WITH E27 20W LAMP. No. 2 1,150.00 2,300.00
13.5 TYPE 5
LOMBARDO LB14221 WITH E27 15W LAMP. No. 3 1,000.00 3,000.00
13.6 TYPE 6
DISANO 413 BORAEL WITH FL 1x18W LAMP. No. 2 1,500.00 3,000.00
13.7 TYPE 7
RZB 25117.002 WITH E27 30W LAMP. No. 3 1,250.00 3,750.00
13.8 TYPE 8
MASSIVE 30136/48/10 WITH E27 20W LAMP. No. 2 1,200.00 2,400.00
13.9 TYPE 9
THORN CHALICE 190H 2x18W TC-DDEL HF LAMP. No. 4 800.00 3,200.00
13.10 TYPE 10
LOMBARDO LB 14342 WITH G23 20W LAMP. No. 2 850.00 1,700.00
14.0 UTILITY

14.1 Three phase KWH-metre by local power authority.

No. 1 50,000.00 50,000.00
ITEM. DESCRIPTION OF WORK UNIT QTY. RATE AMOUNT

TOTAL CARRIED TO SUMMARY 288,100.00

 VIII. Sanitary Installation
8.1 SANITARY EQUIPMENT (FIXTURES)
All fixtures which differs from that specified below is subject to the
owner's approval, based on samples,catalogues and brochures
presented by the Contractor. Unit Price shall include all the
necessary fixing brackets or hooks and all the necessary assistance
civil works such as chiseling of walls,floors, beams and etc...
8.1.1 Supply and fix hand wash basins with chrome plated cold and hot
water tap made of white vitreious china,complete with plug,
chrome plated chain holder, P-smell trap with connection pipe and
with all other necessary accessories.
Size :- ( 500 x 400)mm No 4 20,000.00 80,000.00
8.1.2 Supply and fix wash down water closets made of white vitreous
china with plastic seat and cover including all accessories. No 5 20,000.00 100,000.00
8.1.3 Supply and fix toilet paper holder with chrome plated brass wall
flanged roll with chrome plated fastening screws and other
accessories. No 5 1,500.00 7,500.00
8.1.5 Supply and fix crystal glass mirrors for toilets and wash basins with
copper back protection, size: 500/400 mm including chrome
plated brass mirror clips with chrome plated screws and etc... For
hand wash basins. No 4 3,500.00 14,000.00
8.1.6 Supply and fix single tubular chrome plated swing pattern towel
rails, with chrome plated fastening screws, complete with all the
accessories. /For hand wash basins/ No 4 250.00 1,000.00
8.1.7 Supply and fix soap holder in white vitreous china of
size (150 x 150 )mm. Complete with the necessary fixing and other
accessories for hand wash basins. No 4 1,000.00 4,000.00
8.1.8 Supply and fix floor drains made of enamealed cast iron of
approved quality, complete with P-smell trap and all other
necessary fittings and accessories.
Size:- Dia. 100 mm No 5 1,500.00 7,500.00
8.1.9 Supply and fix electric water heater with a capacity given below.
Complete with all water proofing, mounting and fastening
material, safety, one-way valve and gate valve and with all the
accessories.
Capacity 50 Liter No 4 16,000.00 64,000.00
8.1.10 Supply and fix pressed steel enameled cast iron shower tray,
including shower head, mixing faucet, smell trap, etc.. Complete
with all the necessary accessories.
Size:- 700mm X 700mm No 2 7,000.00 14,000.00
8.1.11 Supply and fix pressed steel enameled cast iron bathtub ,
including shower head, mixing faucet, smell trap, etc.. Complete
with all the necessary accessories.
Size:- 700mm X 700mm No 1 15,000.00 15,000.00
8.1.12 Supply and fix stainless steel kitchen sink with Double bowl
complete with plastic smell trap, plug, chain holder, drain pipe,
mixing faucet, etc; and all other accessories.
Size: 1500 x 600 mm No 1 7,500.00 7,500.00
 VIII. Sanitary Installation
8.1 SANITARY EQUIPMENT (FIXTURES)
8.1.13 Supply and fix pressed fiber glass Jacuzzy,
including shower head, mixing faucet, smell trap, etc.. Complete
with all the necessary accessories. No - - -
8.2 WATER SUPPLY PIPE LINE AND VALVES
Cold and hot water pipes shall be uPVC and cPVC pipes
respectively, and be fixed to slabs, walls, beams or etc…with metal
straps or similar material. Unit price shall include all assistance civil
works and necessary fittings such as T, bends, elbows, etc; and
according to where shown on the drawing. All water pipes shall
be tested two times the working pressure or 50 meters head, which
ever is greater at the expense of the contractor.
8.2.1 Supply, install, test, disinfect and commissioning domestic cold
water supply Upvc (PN-6) piping, including pipe fittings, supports
anchors, (if necessary) and cutting and making of chisels on walls
(if necessary) and necessary accessories, all as specified in the
technical specification and shown on the drawings.
a) Internal Cold Water Upvc Piping in wall
1) dia. 20mm Pipe ML 96 160.00 15,360.00
2) dia. 25mm Pipe ML 46 180.00 8,280.00
b) Internal Hot cPVC piping
1) dia. 20mm Pipe ML 71 150.00 10,650.00
8.2.2 Supply and fix chrome valves of approved standard before hand
wash basins, water closets and other fixtures. Complete with
unions, elastic water proofing, hand wheels of normal quality and
with all other necessary accessories.
Dia. 15 mm No 7 150.00 1,050.00
8.2.3 Supply, fix, test, and commission isolating valves made of brass on
the water supply pipe including accessories, all as specified in the
technical specification and shown on the drawings The work shall
be carried out in accordance with the technical specification and
this document.
Dia. 20 mm (3/4") No 7 100.00 700.00
8.3 WASTE, VENT AND RAIN WATER PIPES AND ACCESSORIES
All domestic waste, vent and storm water pipe lines shall comply to
BS45/4:1983 and DIN 19531 PVC pipes and shall be provided with
a minimum slope as specified in the drawing. Pipes and necessary
fittings shall be standard quality and be free from damage during
storage, construction and etc. Unit price shall include all the
necessary assistance civil works, such as excavation, cartaway,
fixing or hanging to walls, beams or slabs. etc., necessary fittings
such as bends, Y, T, etc. Storm water PVC pipes shall resist the
external temperature and the quality shall meet the purpose.
8.3.1 Supply and lay internal PVC waste pipes according to where shown
on the drawings. Complete with all the necessary fittings.
Dia. 50 mm ML 59 150.00 8,850.00
Dia. 110 mm ML 48 200.00 9,600.00
 VIII. Sanitary Installation
8.1 SANITARY EQUIPMENT (FIXTURES)
8.3.2 Vent caps made of PVC, complete with all accessories and as
shown on the drawing.
Dia. 110 mm No. 3 120.00 360.00
8.3.3 Supply and lay approved quality storm water PVC down pipes
according to where shown on the drawing. Price shall include all
the necessary connecting pieces.
Dia. 110 mm ML 54 200.00 10,800.00
8.4 SITE WORK
8.4.1 Cold water pipes shall be galvanized steel and be fixed to slabs,
walls, beams or etc…with metal straps or similar material. Unit price
shall include all assistance civil works and necessary fittings such as
T, instruction and according to where shown on the drawing. All
water pipes shall be tested two times the working pressure or
50 meters head, which ever is greater at the expense of the
contractor.
Dia. 32 mm ML 38 220.00 8,360.00
8.4.2 Supply and install water meter of approved quality price shall
include gate valves after and before water meter.
Dia. 32 mm. No 1 4,500.00 4,500.00
8.4.3 Supply and lay Upvc pipe for waste water drainage from the
manhole to the septic tank with minimum slope of 2% or natural
ground slope which ever is greater on a firm bed of sand 100 mm
thick below and 200 mm thick above the crown of pipe in open
ground.
Dia. 150 mm ML 52 250.00 13,000.00
8.4.4 Supply and fix approved quality garden taps ,complete with gate
valve and all other accessories and connecting pieces.
Dia. 20 mm. No 1 120.00 120.00
8.4.5 Construct manholes on a sanitary sewer drainage systems as where
shown on the drawing in precast concrete round pipes on 150mm
thick reinforced concrete bottom slab in dia.10c.c150mm both
ways and 120mm thick reinforced cover slab in dia.10c.c150 mm
both ways. Price shall include all assistance civil works and handle.
a) Dia 800X800mm average depth = 1000 mm No 4 5,000.00 20,000.00
8.4.6 Supply and install Roto or Equivalent approved quality elevated
water tank on concrete support as shown on the Sanitary drawing
and site plan. Exact location to be determined on site.
Piping should be as per the detail drawing. Price shall include all the
necessary pipe connections.
3m3 capacity No 1 25,000.00 25,000.00
Total Carried To Summary 451,130.00
 Specification and Bill OF Quantity for Negash Tadese
G+1 RESIDENCE

SUMMARY

A. Sub - Structure
I. Excavation and Earth Works Birr. 144,195.00

II. Concrete Works Birr. 670,168.85

III. Masonary Work Birr. 138,600.00

IV. Septic tank Birr. 216,795.54

Total to A Birr. 1,169,759.39

B. Super - Structure

I. Concrete Works Birr. 1,419,222.85

II. Block Works Birr. 285,120.00

III. Roofing Birr. 252,120.00

IV. Carpentry and Joinery Birr. 253,860.00

V. Aluminum Work Birr. 637,680.00

VI. Finishing Birr. 1,397,748.40

VII. Painting Birr. 235,953.60

VIII. Sanitary Installation Birr. 451,130.00

IX. Electrical Installation Birr. 288,100.00

Total to B Birr. 5,220,934.85

Total A+B Birr. 6,390,694.24

VAT.15% Birr. 958,604.14

Grand Total. Birr. 7,349,298.37

Breakdown For ATO ANGASU LEPISA

A. Sub Structure
Breakdown for Dia Total bar
Rc bar Total bar Total bar Total bar with
length Kg berga weastage

8 #REF! #REF! #REF!

14 #REF! #REF! #REF!

16 #REF! #REF! #REF!

20 #REF! #REF! #REF!

24 #REF! #REF! #REF!

material cost for

material Unit Qunt

Cement qut #REF!

Sand m3 19.41

Gravel m3 #REF!

masonry wall m3 31.50

B. Super Structure
Breakdown for Dia Total bar
Rc bar Total bar Total bar Total bar with
length Kg berga weastage

8 #REF! #REF! #REF!

10 #REF! #REF! #REF!

12 #REF! #REF! #REF!

14 #REF! #REF! #REF!

16 #REF! #REF! #REF!

20 #REF! #REF! #REF!

material cost for

material Unit Qunt

Cement qut 179.21

Sand m3 19.41

Gravel m3 38.83

HITEK CONSULT P.L.C.

 SPECIFICATION & BILL
OF
QUANTITIES

RESIDENTIAL BUILDING (G+2)

FOR

WMJ WAAN OFII

LOCATION
CITY:-BISHOFTU
SUB CITY:-CHELELEKA

DATE :-MAY. 2024