Scribd
Upload
34 views1 page

Blinding and de blinding

The document outlines the Job Hazard Analysis (JHA) for blinding and de-blinding activities at HPCL Visakh Refinery. It identifies various hazards associated with specific tasks and provides control measures to mitigate risks, such as using safety gloves and non-sparking tools. The document also specifies the type of work permit required for each activity, which is categorized as 'Cold'.

Uploaded by

akhilarukawal1234
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
34 views1 page

Blinding and de blinding

The document outlines the Job Hazard Analysis (JHA) for blinding and de-blinding activities at HPCL Visakh Refinery. It identifies various hazards associated with specific tasks and provides control measures to mitigate risks, such as using safety gloves and non-sparking tools. The document also specifies the type of work permit required for each activity, which is categorized as 'Cold'.

Uploaded by

akhilarukawal1234
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

HPCL - VISAKH REFINERY

PROCESS SAFETY MANAGEMENT SYSTEM Doc No: PSM/FR/9.9B


Ref Doc : PSM/PR/9
WORK PERMIT SYSTEM Rev. : 1
FORMATS Date of this Rev : January, 2013
Page 1 of 1
JOB HAZARD ANALYSIS

DIVISION/ DEPT NAME Onsite / Maintenance


PROJECT/ WORK REQUISITION TITLE Base JHA for blinding & De blinding
PROJECT/ REQUISITION NO
JOB DESCRIPTION Blinding & de blinding
ACTIVIT ACTIVITY IDENTIFIED HAZARDS CONTROL/ MITIGATION MEASURES TYPE OF PERMIT
Y NO. DESCRIPTION REQUIRED
J1-A1 Opening of bolts Oil Spillage, burns due to hot Lower most bolt to be opened for slacking of flange for draining any Cold
& Spade insertion liquid/Steam. line content. Suitable Hand gloves to be used as per the service
requirement. Safety goggle’s to be used for eye protection
Bolt tightening Slipping of spanner, injury to hand Finger saver to be used. Safety Gloves to be used. Cold
J1-A2
while tightening.
J2-A1 Bolt Opening & Slipping of spanner, injury to hand Finger saver to be used. Safety Gloves to be used. Cold
Spade removal while hammering for bolt removal.
J2-A2 Flange make up & Usage of Underrating gasket. Gasket installation procedure to be followed and gasket to verified by Cold
Bolt tightening Slipping of spanner, injury to hand inspection and countersigned operations after installation in the
while hammering for bolt tightening. presence of Operations. Finger saver to be used. Safety Gloves to be
used.
J3-A1 Valve passing and Inhaling of HC/H2S Use non sparking tools and use Online respirator/BA set in case of Cold
presence of H2S leak & presence of HC.
Lighter HC Clear area if H2s LEAK IS MORE & inform Operation
J3-A2 Working at Fall of objects/people from height SWP 06 Double harness safety belt to be used & material to be
height properly fastened.
Sign
Prepared By Designation Executing Supervisor
Sign
Approved By
Designation Executing Manager

You might also like