FABRICATION MATERIALS
N CONT. ON
PT COMPONENT DESCRIPTION N.S. MATERIAL CODE QTY WEIG
NO (INS) (KG)
ASJA-10"-WF-030148-AR1
PIPE
E 114365
N 123413 F3 1 PIPE SMLS/WLD EFW 100% X-RAY, BE, SCH 10 PPI00SC00M1N0_110N 7.2M 201.54
EL +9300 10S, ASME B36.19 ASTM A312 S31254/ASTM
1 A358 S31254 CL 1 OR CL 3, NACE MR0175/ISO
15156
2 PIPE SMLS/WLD EFW 100% X-RAY, BE, SCH 6 PPI00SC00M1L0_110N 0.6M 7.85
ASJA-10"-WF-030009-AM1-SD-01 10S, ASME B36.19 ASTM A312 S31254/ASTM
A358 S31254 CL 1 OR CL 3, NACE MR0175/ISO
15156
FLANGES
2231
3 WN FLG, RF, CL150, SCH 10S, ASME B16.5 ASTM 10 PF1RASC00M1N0_140N 1 21.22
10"NS
A182 F44, NACE MR0175/ISO 15156
SUPPORTS
6mm WEEP HOLE
4 PROTECTION SHIELD, PWP01-10-300 10 2 5.29
5 TRUNNION - REINFORCED LTCS & CRA PIPE 6 1 0.00
S6
SUPPORTS (1" - 20"), 10-6-TS-09-561
SP-JAJK-8002 6 WELDED PIPE SHOE FROM BEAM TYPE-A2, 6 1 5.70
PSW01-A2-6-400-100 S5 PSW01-A2-6-400-100
PS-JAJK-7004 TOTAL FABRICATION WEIGHT 241.60
S7 S1
ERECTION MATERIALS
SP-JAJK-8002
PIS01-G-6-150-102 DO NOT CUT HOLE IN PIPE PT COMPONENT DESCRIPTION N.S. MATERIAL CODE QTY WEIG
NO (INS) (KG)
10"NS SUPPORTS
4
S8 30 7 ISOLATOR PAD, PIS01-G-6-150-102 6 1 0.35
>2 8 LINE STOP FOR SHOE, PLS02-B1-6-60-3 6 1 1.96
SP-JAJK-8002 <1 119 9 GUIDE HOLDDOWN FOR SHOE & TRUNNION, 6 1 2.91
PLS02-B1-6-60-3 S 1 PGH02-B1-6-70-3-3
6"N 56
TOTAL ERECTION WEIGHT 5.22
2230
TOTAL WEIGHT 246.82
E 114365
N 122733
EL +7069
S4
S9 SP-JAJK-8004
SP-JAJK-8002 PWP01-10-300
PGH02-B1-6-70-3-3
3601
PS-JAJK-7004-01
S2
S4
SP-JAJK-8004 S3
<2.1> 1
PWP01-10-300
2
01
ASJA-10"-WF-030009-AM1-SD-01
1468
<2> 1
DISCHARGE 2.0M ABOVE SEA SURFACE
E 114365
N 123413
EL +2000
RECEIVED
HOLD: By DOC.CONTROL Dec 15, 2022
1. N/A.
2. N/A.
3. N/A.
NOTE:
1. WPS IS REFERRED TO WHP03-PMC2-ASYYY-24-332010-0001 JA/KA WHP WPS REGISTER FOR PIPING.
2. ALL DIMENSIONS, ELEVATION AND CO-ORDINATES ARE IN MILLIMETERS UNLESS NOTED OTHERWISE. PIECE LENGTH N.SIZE THK WPS EXTRA
SPOOL NO. SCH MATERIAL ENDS MATERIAL CODE
3. PWHT SHALL BE DONE FOR LTCS THK ≥ 25 MM. NO. (MM) (INS) (MM) NO. (MM) REMARK
MP Project Drawing No.
4. CS LINE WITH OD ≥ 4" & THK ≥ 12.7MM, MUT CAN BE APPLIED INSTEAD OF RT OR PS-JAJK-7004-01 <1> 561 6" SCH 10S 3.4 ASTM A312 S31254/ASTM A358 S31254 CL 1 OR CL 3, NACE MR0175/ISO 15156 BE/BE Note 1 PPI00SC00M1L0_110N
CS LINE WITH OD ≥ 2" & THK ≥ 5.54MM, PAUT CAN BE APPLIED INSTEAD OF RT. 01 ASJA-10"-WF-030009-AM1-SD-01 <2.1> 5730 10" SCH 10S 4.19 ASTM A312 S31254/ASTM A358 S31254 CL 1 OR CL 3, NACE MR0175/ISO 15156 BE/BE Note 1 PPI00SC00M1N0_110N WHP03-PMC2-ASJAY-56-030009-0001-SD
ASJA-10"-WF-030009-AM1-SD-01 <2> 1468 10" SCH 10S 4.19 ASTM A312 S31254/ASTM A358 S31254 CL 1 OR CL 3, NACE MR0175/ISO 15156 BE/BE Note 1 PPI00SC00M1N0_110N
SUMMARY:
GLF-WHP03-EPCI5
The information contained in this document is the proprietary to North Oil Company. It must not be reproduced,
1. ALL DIMENSION ARE IN mm 11. JOINT No.:
12. FIELD JOINT (FJ) No.: stored, disclosed to any third party or used for any purpose not authorized by North Oil Company
2. WELD NO.: 1 TO 2
Title
3. TACK WELD (TW) No.: 13. FIELD FIT JOINT (FFJ) No.:
IFI REV: 01 ASJAA-09-270002-0001 JA WHP
4. FIELD WELD (FW) No.: 14. RE-WELD (RW) No.:
NO - FABRICATION ISOMETRIC
5. FIELD FIT WELD (FFW) No.: 15. NEW WELD No.:
ATM 2 1
6. FLANGE JOINT (FLJ) No.:
30/37 JA-GRE-01 AM1 B31.3
ASJA-10"-WF-030009-AM1
7. SUPPORT WELD No.: S1, S2, S3 Doc Type S/Syst Originator Drawing Number Phase Class
20 P05 NA N/A 01 14-Dec-2022 IFC ISSUED FOR CONSTRUCTION TVQ NTH NQ
8. THREAD JOINT No.: ISO 03 DE 3
5 / 50 00 11-Aug-2022 IFC ISSUED FOR CONSTRUCTION LCT NTH NQN
9. OFFSHORE FIELD WELD/JOINT (OSFW/OSFJ) No.:
WATER 5% RT (or PAUT) Scale Size Drawing No. Folio Rev
10. OFFSHORE FIELD FIT WELD/JOINT (OSFFW/OSFFJ) No.: Issued Reviewed Approved
Rev. Date Sta. Description
FOW 5% PT None by by by NONE A2 ASJAY-56-030009-0001-SD 1 OF 1 01
