YT CHANNEL – PrepJEET JEE ADVANCED PHYSICS

JEE ADVANCED PROBLEMS

FREE DPP - 01

Click Here
Click Here
1. A small positively charged ball of mass 𝑚 is suspended by an
insulating thread of negligible mass. Another positively charged
small ball is moved very slowly from a large distance until it is in the
original position of the first ball. As a result, the first ball rises by h.
How much work has been done?
FOR SOLUTION – Click Here
2. A uniform triangular plate is placed on a rough horizontal floor. When it is given angular
velocity 10rad/sec about a vertical axis passing through its corner as shown in figure-I. it takes
time 6 sec to a complete stop. Now a uniform regular hexagon of same material and thickness
placed on same floor (case-1) given angular
velocity of 5rad/sec to rotate about
another vertical axis passing through its
center as shown in figure-II. How long will
it take to a complete stop? [Coefficient of
friction is same all over surface]
(A) 6 sec (B) 3 sec (C) 1.5 sec (D) Can't determine
FOR SOLUTION – Click Here
3. A uniform rod of mass m and
length L is kept on smooth
horizontal surface as shown.
An external force F is applied
perpendicular to rod as
shown. Find acceleration of
end A?
FOR SOLUTION – Click Here
4. A circular cross section body of mass m and radius R is acted
upon by a horizontal force F acting at centre of body as
shown. Find the friction force and minimum value of
coefficient of friction such that there is no slipping at contact
point ?
FOR SOLUTION – Click Here
2|Page
5. An equilateral triangle ABC is cut from a thin solid sheet of wood.
(See figure) D, E and F are the mid-points of its sides as shown and
G is the centre of the triangle. The moment of inertia of the triangle
about an axis passing through G and perpendicular to the plane of
the triangle is I! . If the smaller triangle DEF is removed from ABC,
the moment of inertia of the remaining figure about the same axis
is I. Then:
" $% ' (!
(A) I = I! (B) I = I! (C) I = I! (D) I =
# $& $& #

FOR SOLUTION – Click Here

6. Magnetic field lines of a long solenoid are as shown
in figure (only few of then are drawn). The
magnetic field line that emerges out of end
perpendicular to length has minimum distance with
axis of solenoid at mid of solenoid, equal to r, find
r ? (Radius of solenoid is R)
FOR SOLUTION – Click Here
7. A small body A is fixed to the inside of a thin rigid hoop of radius R
and mass equal to that of the body A. The hoop rolls without slipping
over a horizontal plane; at the moments when the body A gets into
the lower position, the centre of the hoop moves with velocity 𝑣! . At
what values of 𝑣! will the hoop move without bouncing ?
FOR SOLUTION – Click Here
8. The general motion of a rigid body can be considered to be a combination of (i) a motion of its
centre of mass about an axis, and (ii) its motion about an instantaneous axis passing through
center of mass. disc These axes need not be stationary. Consider, for example, a thin uniform
disc welded (rigidly fixed) horizontally at its rim to a
massless stick, as shown in the figure. Where disc stick
system is rotated about the origin on a horizontal
frictionless plane with angular speed, the motion at any
instant can be taken as a combination of (i) a rotation of

3|Page
 the centre of mass the disc about the z -axis, and (ii) a rotation of the disc through an
instantaneous vertical axis passing through its centre of mass (as is seen from the changed
orientation of points P and Q). Both the motions have the same angular speed 𝜔 in the case
Now consider two similar systems as shown in the figure: case (a) the disc with its face vertical
and parallel to x − z plane; Case (b)
the disc with its face making an angle
of 45∘ with x − y plane its horizontal
diameter parallel to x -axis. In both
the cases, the disc is welded at point P
, and systems are rotated with
constant angular speed 𝜔 about the z
-axis.

FOR SOLUTION – Click Here

9. Two thin circular discs of mass 𝑚 and 4 m , having radii of a and 2 a respectively are rigidly
fixed by a massless, rigid rod of length 1 = √24 a through their centers. This assembly is laid
on a firm and flat surface, and set rolling
without slipping on the surface so that
the angular speed about the axis of the
rod is 𝜔. The angular momentum of the
entire assembly about the point ' O ' is ?L⃗
(see the figure). Which of the following
statement(s) is (are) true?
(A) The center of mass of the assembly rotates about the z-axis with an angular speed of ω/5
(B) The magnitude of angular momentum of center of mass of the assembly about the point 0
is 81ma* ω
(C) The magnitude of angular momentum of the assembly about its center of mass is
17ma* ω/2
?⃗ is 55ma* ω.
(D) The magnitude of the z-component of L

FOR SOLUTION – Click Here

4|Page
 (PARAGRAPH QUESTION)
A frame of reference that is accelerated with respect to an inertial frame of reference is called a
non-inertial frame of reference. A coordinate system fixed on a circular disc rotating about a
fixed axis with a constant angular velocity ω is an example of a noninertial frame of reference.
The relationship between the force ?F⃗rot experience by a particle of mass m moving on the
rotating disc and the force ?F⃗in experienced by the particle in an inertial frame of reference is
?F⃗+,- = F
?⃗./ + 2 m(?v⃗+,- × ω
??⃗) + m(ω
??⃗ × r⃗) × ω
??⃗
where v
?⃗rot is the velocity of the particle in the rotating frame of reference and r⃗ is the position
vector of the particle with respect to the centre of the disc. Now consider a smooth slot along a
diameter of a disc of radius R rotating counterclockwise with a constant angular speed ω about
its vertical axis through its center. We assign a coordinate system with the origin at the center
of the disc, the x-axis along the slot, the y-axis perpendicular to the slot and the z-axis along the
rotation axis (ω
??⃗ = ωk̂). A small block of mass m is gently placed in the slot at r⃗ = (R/2)ı̂ at
t = 0 and is constrained to move only along the slot.

10. The distance r of the block at time t is

0 0
(A) # (e1- + e21- ) (B) * cos ωt
0 0
(C) # (e*1- + e2*1- ) (D) * cos 2ωt

FOR SOLUTION – Click Here

11. The net reaction of the disc on the block is
$ $
(A) * mω* R(e*1- − e2*1- )ȷ̂ + mgk̂ (B) * mω* R(e1- − e21- )ȷ̂ + mgk̂

(C) −mω* Rcos ωtȷ̂ − mgk̂ (D) mω* Rsin ωtȷ̂ − mgk̂
FOR SOLUTION – Click Here

5|Page
 ANSWER KEY
1. 2. 3. 4. 5. 6. 7.

8. 9. 10. 11.

6|Page