Test Spec https://tmiwebclassic.cat.com/tmi/servlet/TMIDirector?Action=RDBu...
T��� S��� [GFP01249] M���� 06, 2025
(GFP01249)-E����� (G7X00210)-G�������� For Help Desk Phone Numbers Click here (/tmi/
tmihome/TMIContactInfo.htm)
Reference Number: 5644083
Effective Serial Number: GFP01225
Model: G3520H SI TA SCAC Make from Spec:
Test Spec Data
Description Measure Nominal Ceiling Floor
Corr Full Load Power kW 2,593.0 2,670.8 2,580.0
Full Load Speed RPM 1500 1510 1490
High Idle Speed RPM 1500 1510 1490
Low Idle Speed RPM 1000 1030 970
Corrected Fuel Rate KJ/MIN 346,950 360,830 333,080
CSFC KJ/KW.H 8,050.0 8,170.8 7,929.2
Corr Torq Rise at TC RPM % 7.0
Corr Torque at TC RPM N.M 16,510 17,660 15,350
Torque Check Speed RPM 1500 1510 1490
C Fuel Rate at TC RPM KJ/MIN
CSFC at TC RPM KJ/KW.H
Temp Jacket Water Pump Inlet C 89 92 86
Delta T Jacket Water (out-in) C 10 15 5
Inlet Manifold Temp C
Water Temp to Scac C 48 51 45
Scac Water Flow L/MIN
Diff Fuel Pressure SI KPA
Diff Fuel Pressure (High) SI KPA
Compressor Out Press SI KPA 486.5 510.0 463.0
Inlet Manifold PR - ABS SI KPA 445.0 448.0 442.0
Inlet Fuel Pr - ABS SI KPA 131 159 103
Excess Oxygen SI % 9.5 10.0 9.0
Oil Pressure KPA 325 437 323
Oil Pressure Low Idle KPA 325 475 285
Oil Temp to Bearings C
Throttle Angle DEG
NOx PPM 180 210 150
Adjusted Boost (Gas Blending) KPA
Corrected Fuel Rate - Diesel (Gas Blending) G/MIN
Corrected Fuel Rate - Gas (Gas Blending KJ/MIN
Full Load Fueling (Gas Blending) MM3/ST
Gas Substitution Ratio (Gas Blending) %
Corr Full Load Power (Gas Blending) KW
Full Load Speed (Gas Blending) RPM
Exhaust Back Pressure KPA
TQ CK Exhaust Back Pressure KPA
Ataac Delta Pressure KPA
Engine Reference Information
Description Measure Data
Fuel Valve Part Number
Unit Injector Part Number
Timing Dimension Field Service mm
Timing Dimension Factory
Torque Control Group Number Change Level:
1 of 3 3/6/2025, 7:34 PM
Test Spec https://tmiwebclassic.cat.com/tmi/servlet/TMIDirector?Action=RDBu...
Engine Reference Information
Description Measure Data
Fuel Pump/Gov Grp Part Number
Fuel Pump Type SI
Flyweight Part Number/Attitude
4230902 / A140-H66/TA53
Turbo Part No and Model
Advertised Power / Governor Speed 2,593.0kW 1,500 RPM
Compression Ratio 12.1
Torque Rise Cam Part Number
Manifold Type DRY
Engine Flash File Part Number 5936337
Rating Number
Flash File Change Number
ASM Flash File Part Number
ISM Flash File Part Number 5663900
Advisor Flash File Part Number
Secondary Module Flash File Part Number
Messenger Flash File Part Number
Tandem Software Flash File Part Number
Governor Type ADEM4
Timing Data
Mechanical Advance Part Number:
Chg. Level:
Advance: 0.0 DEG
Dog Leg Differentials: RPM: -- KW: --
Description Measure Spec Minimum Maximum
Timing Static @ 0 RPM BTDC DEG 22.0 20.0 24.0
Application/Performance Data
Description Measure Data
Application Identification 226 GS CONTINUOUS
Engine Sales Model and Series G3520 H
Combustion System type SI
Aspiration Type TA
Engine Source Factory Ref Number 88
LL4927
Power Setting PL/PP Ref Number
EM2164
Engine Perf Data Ref No and Change Level
Generator Rating W/O Fan EKW 2500
Generator HZ 50
Engineering Model Ref
GS743
Sales Model
Machine Facility
Usage
Transmission
Description GS
Serial Number Prefixs
Altitude Derating Information
Description Measure Data
2 of 3 3/6/2025, 7:34 PM
Test Spec https://tmiwebclassic.cat.com/tmi/servlet/TMIDirector?Action=RDBu...
Altitude Derating Information
Description Measure Data
Altitude - Maximum M
Engine Power (ADV) kW
Engine Power (Test) kW
Spec Number vs.
Arrangement Number Cross Reference
Arrangement 4228179 4228181
Caterpillar Confidential: Green
Content Owner: Commercial Processes Division
Web Master(s): PSG Web Based Systems Support (http://tmiwebclassic.cat.com/tmi/tmihome/PSGIS_support.htm)
Current Date: 3/6/2025, 7:31:13 PM
© Caterpillar Inc. 2025 All Rights Reserved.
Data Privacy Statement.
Cookie Settings
3 of 3 3/6/2025, 7:34 PM