1. Dr. V.Ramesh and Dr. T.R.

Srinivas, “Implementation of Value Stream Mapping

for the Manufacture of Machining Center in a Medium Scale Industry”,
International Journal of Industrial and Systems Engineering, JISE, The official
Publication of Iranian Institute of Industrial Engineering, Volume-2, Number 3,
February-2008, Page No. 180-196
2. Dr. V .Ramesh, Dr. T.R.Srinivas, and Dr. K.V. Sreenivasa Prasad “Study on
implementation of one-piece lean line design using simulation techniques: A
practical approach” Journal of Industrial Engineering International, Islamic Azad
University, South Tehran Branch, Jan 2008, Vol-5, No.8, pp 20-36.
3. Dr. V.Ramesh and Dr. T.R.Srinivas, “Implementation of Total Productive
Manufacturing Concept with reference to Lean Manufacturing in a Process
Industry in Mysore”, ICFAI Journal of Operations Management, Volume-7,
Number 4, February-2008, Page No. 45-57
4. Dr. V.Ramesh and Dr. T.R.Srinivas, “Study on Implementation of One Piece Lean
Line Design using Simulation Techniques- A Practical Approach”, Journal of
Industrial Engineering and International Volume-5, Number 8, January-2009,
Page No. 30-36.
5. Dr. V.Ramesh and Dr. T.R.Srinivas, “Simulation Study for Reducing the Total Cost
and Cycle Time using the Techniques of Lean Manufacturing- A Case Study”,
Indian Institute of Industrial Engineers (IIIE), February-2009, Page No. 14-21.
6. Dr. V.Ramesh and Dr. T.R.Srinivas, “Implementation of a Lean Model for carrying
out Value Stream Mapping in a Manufacturing Industry”, International Journal of
Industrial Engineering and Technology ISSN 0974-3146 Volume-1, Number 1-2,
2009, , Page No. 99-118.
7. Dr. V.Ramesh and Dr. T.R.Srinivas, “Implementation of Value Stream Mapping to
Reduce the Waste in an Organization- A Lean Manufacturing Approach” SIMS
Journal of Management, August-2010.
8. Dr.V.Ramesh, Arun Kumar, D.,“Study on Implementation of Lean Production
System in Inner Tube Manufacturing Industry: A Case Study”, International
Journal of Innovation in Engineering and Technology, Vol. 5, Issue 2, pp. 87-96,
April, 2015.
9. Skanda M.G., Dr. V. Ramesh, D. Arun Kumar “Human error analysis: A case study
in a Tyre Tube Polymer Processing Industry”, International Journal of Latest
Trends in Engineering and Technology (IJLTET), ISSN: 2278-621X, VOLUME 7
ISSUE 2 - JULY 2016.
10. Skanda M.G., Dr. V. Ramesh “Industrial Accidents and Individual Differences: A
Review on Personality Traits and Accident Proneness in Manufacturing
Sectors”published in Journal of Advanced Research in Dynamical & Control
Systems, Vol. 10, 05-Special Issue, 2018.
11. Sowmya C, Dr V Ramesh, Karibasavaraja D. (2017). An Experimental
Investigation of New Hybrid Composite Material using Hemp and Jute Fibres and
Its Mechanical Properties through Finite Element Method , Materials Today
Proceedings 5 (2018) 13309-13320, published byElsevier Science Direct.
12. C. Sowmya, Karibasavaraja D, Dr. V Ramesh and Skanda M.G titled “the Effects
of Electroless Nickel Phosphorus Deposition, pH and Temperature with the
 Varying Coating Bath Parameters on Impact Energy by Taguchi Method”
International Journal of Mechanical, Aerospace, Industrial, Mechatronic and
Manufacturing Engineering (WASET) Vol:11, No:4, 2017.
13. D. Arunkumar, Dr. V. Ramesh and Skanda M.G., ‘Implementation of Rapid Upper
Limb Assessment Technique in Automotive Parts Manufacturing Industry’ ,
International Journal of Recent Technology and Engineering. ISSN: 2277-3878,
Volume-8, Issue-3, September 2019

1. D.Karibasavaraja, “An experimental analysis of fracture behavior low carbon

steel under varied Temperature and material conditions” e-ISSN: 2395-0056;
International Research Journal of Engineering and Technology (IRJET) e-ISSN:
2395-0056 Volume: 02 Issue: 08 | Nov-2015 pp: 211-218.
2. D.Karibasavaraja “Experimental Analysis On The Effects Of Sodium
Hypophosphite Concentration, PH And Temperature With The Varying Coating
Bath Parameters On Impact Energy” e- ISSN (O) 2319 -8354; International
Journal of Advance Research in Science and Engineering (IJARSE) e-ISSN 2319-
8346 Volume : 05 Issue :08 | Sept-2016 pp:281-293
3. D.Karibasavaraja,M.G. Skanda, C.Sowmya,Dr.V Ramesh “the Effects of
Electroless Nickel Phosphorus Deposition, pH and Temperature with the Varying
Coating Bath Parameters on Impact Energy by Taguchi Method” International
Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing
Engineering (WASET) Vol:11, No:4, 2017
4. D.Karibasavaraja,C. Sowmya, V.Ramesh(Proceedings)“An Experimental
investigation of Novel hybrid composite material using Hemp and Jute fibers and
Its Mechanical Properties through Finite Element Method” Science Direct
5. Experimental analysis of Fracture Toughness of EN9 and EN31 Steel under
double layer of electroplating materials with different varied thickness To cite this
article: D Kari Basavaraja et al 2021 IOP Conf. Ser.: Mater. Sci. Eng. 1065 012012
6. Dr. Skanda M G, Dr. V Ramesh, Dr. D Arunkumar, “Importance of Error
Management in Occupational Safety: A Case Survey Conducted in
Manufacturing Set-ups”, The SA Journal of Industrial Psychology (Communicated)
October 2020, (Web of Science Indexed)
7. Dr. D Arunkumar, Dr. V Ramesh, Dr. Skanda M G, “Implementation of Rapid
Upper Limb Assessment Technique in Automotive Parts Manufacturing
Industry” International Journal of Recent Technology and Engineering ISSN:
2277-3878, Volume-8, Issue-3, September 2019 (Scopus Indexed).
8. Skanda M.G., D. Arun Kumar, Dr. V. Ramesh, "Human Machine Interaction and
Safety: Identification of human errors through task analysis, Journal of Material
Science and Mechanical Engineering (JMSME) p-ISSN: 2393-9095; e-ISSN: 2393-
9109; Volume 3, Issue 6; July-September, 2016 pp. 433-437
9. Skanda M.G., Dr. V. Ramesh, D. Arun Kumar “Human error analysis: A case
study in a Tyre Tube Polymer Processing Industry”, International Journal of
Latest Trends in Engineering and Technology (IJLTET), ISSN: 2278-621X,
VOLUME 7 ISSUE 2 - JULY 2016
10. Dr. V. Ramesh, Arun Kumar, D., “Study on Implementation of Lean Production
System in Inner Tube Manufacturing Industry: A Case Study”, International
Journal of Innovation in Engineering and Technology, Vol. 5, Issue 2, pp. 87-96,
April, 2015.
11. D Arunkumar, Dr. V. Ramesh, “Cellular Manufacturing Layout in Inner Tube
Manufacturing Industry: A Case Study” in International Journal of Scientific
Engineering and Technology Vol. No.1, Issue No.6, Pg. 306-313, 2012.
12. D Arunkumar, “Durability and performance of surface treated worm drives of
similar material pair” in Tribology International Vol. 31, No.7, pp, 385-392, 1998
13. Dr. Skanda M G, Dr. V Ramesh, Dr. D Arunkumar, “Importance of Error
Management in Occupational Safety: A Case Survey Conducted in
Manufacturing Set-ups”, The SA Journal of Industrial Psychology
(Communicated) October 2020, (Web of Science Indexed)
14. Dr. D Arunkumar, Dr. V Ramesh, Dr. Skanda M G, “Implementation of Rapid
Upper Limb Assessment Technique in Automotive Parts Manufacturing
Industry” International Journal of Recent Technology and Engineering ISSN:
2277-3878, Volume-8, Issue-3, September 2019 (Scopus Indexed).
15. Skanda M G, Dr V Ramesh, “Industrial Accidents and Individual Differences: A
Review on Personality Traits and Accident Proneness in Manufacturing Sectors”,
Journal of Advanced Research in Dynamical & Control Systems, Vol. 10, 05-
Special Issue, 2018, ISSN 1943-023X (Scopus Indexed).
16. D Kari Basavaraja, Skanda M G, C Soumya, Dr. V Ramesh “Experimental
Investigation on the Effects of Electroless Nickel Phosphorus Deposition, pH and
Temperature with the Varying Coating Bath Parameters on Impact Energy by
Taguchi Method”, International Journal of Industrial and Manufacturing
Engineering Vol:11, No:4, 2017.
17. Skanda M G, Dr. V Ramesh, D Arunkumar, “Human Machine Interaction and
Safety: Identification of Human Errors through Task Analysis”, Journal of
Material Science and Mechanical Engineering (JMSME), p-ISSN: 2393-9095; e-
ISSN: 2393-9109; Volume 3, Issue 6; July-September, 2016 pp. 433-437.
18. Skanda M G, Dr. V Ramesh, D Arunkumar “Human error analysis: A case study
in a Tyre Tube Polymer Processing Industry”, International Journal of Latest
Trends in Engineering and Technology (IJLTET), ISSN: 2278-621X, Volume 7
Issue 2 - July 2016, 1-7.
19. Doctoral Colloquium
20. Selected to present research work in ‘Vishleshan, 2019’ a Doctoral Colloquium
held in the Department of Industrial and Systems Engineering, IIT Kharagpur.
Title of the presentation ‘Understanding the Role of Cognitive and Behavioral
Factors in Accident Causation: A Case Approach on Industrial Workers’. Event
dates 15.02.2019 to 16.02.2019
21. E. By invitation
22. Invited to deliver a talk in interaction session held in IIT Indore on the topic
“Application of Pointing and Calling Method in industries to reduce human
errors” in Applied Cognition and Human Factors Laboratory, IIT Indore on
26.04.2019.
23. Invited to be a judge for Paper Presentation “PRATIBIMB 2019”, A National
Conference Organized in the Dept. of I&PE the NIE, Mysore, April 2019.
24. Invited to be a judge for Paper Presentation “PRATIBIMB 2018”, A National
Conference Organized in the Dept. of I&PE the NIE, Mysore, April 2018.
25. Invited to deliver a talk in Symposium jointly organized by IIT-Gandhinagar and
National Frontiers of Engineering on the theme ‘Cognition and Safety’. Talk
delivered on the topic: Human Error – ‘Just Human, Not Just an Error’ during
September 2014.
26. C.Sowmya, Karibasavaraja D, Ravindra Naik titled “Experimental Analysis of
Facture toughness of EN9 and EN31 steel under double layer of Electroplating
materials with different varied thickness” IOP conference Series Materials
Science & Engineering 1065 (2021) 012012.
27. Sowmya C, Dr. V Ramesh, Vijaya Kumar P titled “Man Power Reduction in
Moulding Operations through SWCT Study Technique” Journal of Engineering
 and Management TEST, ISSN: 0193-4120, Vol 83, Page No. 8284 – 8292, March-
April 2020 (Scopus Indexed).
28. C.Sowmya, V.Ramesh, Karibasavaraja D titled “An Experimental investigation
of Novel hybrid composite material using Hemp and Jute fibers and Its
Mechanical Properties through Finite Element Method” International conference
on materials, manufacturing and modeling, Materials Today Proceedings
published in Elsevier, ISSN: 2214-7853, Vol 5, Issue 5, part 2, pages 13309-13320,
2018 (Web of Science).
29. C.Sowmya, Karibasavaraja D, Dr. V Ramesh and Skanda M.G titled “The Effects
of Electroless Nickel Phosphorus Deposition, pH and Temperature with the
Varying Coating Bath Parameters on Impact Energy by Taguchi Method”
International Journal of Mechanical, Aerospace, Industrial, Mechatronic and
Manufacturing Engineering (WASET) Vol:11, No:4, 2017.
30. Manjunatha B, “Optimization of a Plant Layout for the Forklift Movement for a
Coffee Plant”, International Conference (Digital) on Research & Innovations in
Science, Engineering & Technology, organized by Birla Vishvakarma
Mahavidyalaya Engineering College, Gujarat, India, during 4th – 5th September
2020. Psychology and Education Journal, Vol. 58 No. 5 (2021): Vol. 58 No. 5 (2021).
31. http://psychologyandeducation.net/pae/index.php/pae/article/view/5138/4471.
32. Manjunatha B, “Synthesis & Mechanical Characterization of Aluminum
Reinforced with Various Nano-Sized TiO2 Particulate composite”, International
Conference on advances in Mechanical Engineering Sciences (ICAMES-2K20),
organized by PES college of Engineering, Mandya, India, during 28th – 29th
February 2020. (Communicated) (Scopus Indexed).
33. Manjunatha B, “Reduction of CO2 emission in a Hotel Industry by using Total
Productive Maintenance (TPM) Tools”, AIP Conference Proceedings 2080,
060001 (2019); https://doi.org/10.1063/1.5092936.
34. Manjunatha B, “Method Study on laboratory Reagents consumption in Tertiary
Healthcare firms to increase productivity”, International Journal of Mechanical
and Production Engineering (IJMPE), Volume-6, Issue-6, pp 62-66, 29th April
2018. ISSN (p): 2320-2092, ISSN (e): 2321-2071(Web of Science indexed).
35. https://www.digitalxplore.org/proceeding.php?pid=366.
36. Manjunatha B, “Implementation of total productive maintenance (TPM) to
increase overall equipment efficiency of a hotel industry”, RiMES-2017, MATEC
Web of Conferences 144, 05004(2018).
37. https://doi.org/10.1051/matecconf/201814405004.
38. Manjunatha B, “A Study on Implementation of Total Quality Management
(TQM) in Hospital to Improve Service Quality”, Proceeding of National
Conference on Advances in Mechanical Engineering Science-International
Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016
Page No.22-25.
39. Manjunatha B, “Management Information System (MIS) in Hotel Industries to
Improve Overall Efficiency”, Proceeding of National Conference on Advances in
Mechanical Engineering Science-International Journal of Emerging Trends in
Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.399-405.
40. Manjunatha B, “Ecotel concept for energy conservation &waste reduction in hotel
industries”, International Journal of Computer Applications (IJCA) ISBN: 973-
9380892-01-1, Proceedings on NCPSIA-15, Number.01, December 2015 Page
No.22-24
41. Manjunatha B, “Waste Minimization Initiatives and Energy Conservation in
Hotel Industries”, International Journal of Research in Science and Technology
(IJRST) ISSN: 2249–0604 Volume-4, Issue-3, July-Sept 2014, Page No. 81-89.
42. American International Journal of Research in Formal, Applied & Natural
Sciences (International Association of Scientific Innovation and Research, UGC
approved journal) Dr. Dayakar G. Devaru, Mr. Ravishankar M.D, Dr. Rathnakar
G, 28(1), September-November 2019, pp.01-06
(http://iasir.net/AIJRFANSpapers/AIJRFANS19-401.pdf)

43. Feasibility Analysis for Implementing GPR Scanning System in Sawmills for
Productivity
Improvement. International Journal of Advances in Management Science:
July 2015, Vol. 4 No. 1. pp.
1-15. DOI:10.12783/ijams.2015.0401.01
D. Devaru, N. Banuri, B. Gopalakrishnan, H. Latif,
(http://www.dpi-journals.com/index.php/IJAMS/article/view/1503)
44. Ground Penetrating Radar (GPR) based system for non-destructive detection of
interior defects inwooden logs, International Journal of Manufacturing Research:
2008 Vol.3, No.4, pp.425 – 451. (Inderscience Publications, Scopus Indexed
Journal) DOI: 10.1504/IJMR.2008.020903
45. D. Devaru, U. Halabe, B. Gopalakrishnan, S. Agrawal
(https://www.inderscience.com/info/inarticle.php?
artid=20903)Algorithm for detecting defects in wooden logs using ground
penetrating radar, Intelligent Systems in
Design and Manufacturing, SPIE Proceedings: 2005 Vol. 5999.
46. D.Devaru, U. Halabe, B. Gopalakrishnan, S. Agrawal, S.
Grushecky,(http://spie.org/Publications/Proceedings/Paper/10.1117/12.630835)
DOI: 10.1117/12.630835