COUNTER SUNK

FLOOR CLEAN OUT 0.60 REPUBLIC OF THE PHILIPPINES

0.10 0.40 0.10
4"x 8"x 16" CHB WALL W/
300
SPECIFICATIONS : DPWH
10mmØ REBARS SPACED
@ 400mm O.C. BOTHWAYS
PLUMBING NOTES: OFFICE OF THE BUILDING COUNCIL
HANGER ROD 50MM Ø VENT
`ALL FIXTURES SHALL BE VENTED,

0.10
4" Ø PVC PIPE
1. ALL PLUMBING WORKS SHALL CONFORM WITH UNLESS OTHERWISE INDICATED.
15MM Ø CWL THE PROVISIONS OF RA1378, (NATIONAL PLUMBING
CODE OF THE PHILPPINES, 1999) AND THE RULES AND

370
PIPE CLAMP 50mmØ BEND VENT
`AIR CHAMBER: ALL INDIVIDUAL
REGULATIONS OF THE LOCAL HEALTH ORDINANCES.

0.40

0.60
COUNTER SUNK
BRANCHES TO FIXTURE OR GROUP OF
FLOOR CLEAN OUT WATER PROOFING I L O I L O C I T Y
MEMBRANE FIXTURES AND/OR EQUIPMENT
1OOmmØ X 5oØ-14
BEND W/ 5OmmØ
2. ALL PLUMBING PIPES & FITTINGS, WASTE SHALL BE PROVIDED WITH AIR
SIDE OPENING
PIPES MOLDEX SANIMOLD EXTRA;

0.10
CHAMBER CAPPED VERTICAL PIPE
HANGER ROD WATER SUPPLY PIPES; MOLDEX BLUE PIPES; GATE EXTENSION OF DIMENSION AS IN
VALVES & CHECK VALVES CRANE; FIXTURES & DETAIL.
0.60
100MM Ø SOIL PIPE
TO
FLOOR FLANGE
ACCESSORIES - AMERICAN STANDARD;
0.10 0.40 0.10
100mm Ø SOIL PIPE
50mm THK. CONC.
100MM Ø SOIL PIPE STACK
S E C T I O N
LEADER/DOWNSPOUT - PVC S1000 PIPES; FREE FROM `ALL SEWER LINES SHALL BE
SECTION/ELEVATION SLAB W/ 10mm Ø GRAB BAR ALL DEFECTS & DEFORMITIES. SANIMOLD EXTRA UPVC PIPE (HD)

0.05
COUNTER SUNK
FLOOR CLEAN OUT 100mm Ø SOIL PIPE 3. ALL HORIZONTAL WASTE/ DRAIN PIPES `ALL MAIN VENT STACKS SHALL BE
4"x 8"x 16" CHB WALL W/ 5OmmØ VENT
HAVING A DIAMETERS OF 100mm OR LESS SHALL UPVC PIPE SERIES 1,000
10mmØ REBARS SPACED P L U M B I N G

53O
HAVE A MINIMUM GRADE OF 2%; PIPES OF DIAMETER

0.45
@ 400mm O.C. BOTHWAYS

0.60
PLAN 15MMØ CWL LARGER THAN 110mm, A MINIMUM GRADE OF 1%. `ALL CIRCUIT VENT SHALL BE UPVC
PIPE SERIES 1,000
100mm THK. CONC. SLAB P L A N
4. ALL PLUMBING PIPES, HORIZONTAL OR STACK, P L U M B I N G

0.10
SLAB SOFFIT

W/ 3-10mmØ REBARS ABOVE GRADE, SHALL BE PROVIDED WITH HANGERS,

CEILING CLEAN
OUT
HANGER ROD
SUPPORTS AND/OR BRACKETS AS DIRECTED /
`ALL DOWNSPOUT (D.S.) SHALL BE PVC SYMBOLS
50mm THK. CONC. PIPE SERIES 1,000
APPROVED BY THE ENGINEER.
100mm Ø SOIL PIPE
SLAB W/ 10mm Ø GRAB BAR

3 WATER CLOSET DETAIL `ALL COLD WATER LINES SHALL BE

WATER LINE

5. NO PLUMBING PIPE SHALL BE EMBEDDED IN PVC PIPE SCHEDULE 40

SECTION/ELEVATION
CATCH BASIN DETAIL P-2 SCALE: THE STRUCTURAL MEMBERS, SUCH AS BEAMS, NTS VENT PIPE

2 COLUMN OR SLABS ABOVE GRADE, EXCEPT AS

`COLD WATER LINES (CWL) - SOIL WASTE LINE

1 CLEAN OUT DETAIL P-2 SCALE: NTS

SHOWN DRAWINGS AND/OR BY THE ENGINEER.
PLUMBING ANALYSIS
PROVIDE SLEEVES OF G.I. PIPE SIZED TO HAVE
POLYPROPYLENE PIPES BRAND.
TEE
CLEARANCE AROUND THE PLUMBING PIPE PASSING
`DRAINAGE LINES - PVC PIPE SERIES
P-2 SCALE: NTS WATER TANK SIZE & CAPACITY CALCULATION THROUGH MASONRY WALLS, FLOORS OR ROOF
From Revised Philippine National Plumbing Code 1999 DAILY SLABS, WITH NON COMBUSTIBLE MATERIAL. 1OOO II, WITH SOLVENT JOIN FITTINGS, SANITARY TEE
WATER CONSUMPTION PER DAY PER PERSON FOR "NELTEX /
CHECK VALVE CAPPED EMERALD" BRAND OR EQUAL.
RESIDENTIAL 6. ALL VENT-THRU-ROOF PIPES SHALL CLEAR 90° ELBOW
WATER METER REFERENCE FOR SIZING OF SEPTIC VAULT OUTSIDE BUILDING SHALL BE
20mm Ø AIR 1. Drinking – 5 litres ROOFING AT LEAST 300mm..
90° ELBOW GATE VALVE CONCRETE DRAIN PIPE (CDP).
CHAMBER TOTAL DFU = ??? =????? CU.M. (FOR SEPTIC TANK) 2. Cooking – 5 litres 45° ELBOW
DESIGN OF SEPTIC VAULT: 3. Bathing & Toilet - 85 litres 7. SEPTIC VAULT SHALL BE CONSTRUCTED
REDUCER MIN. LIQUID DEPTH = 4. Washing Clothes & Utensils - 30 litres WATER TIGHT AND LOCATED AT A SAFE DISTANCE `SEWER AND WASTE LINES - 500 TO CB CATCH BASIN
AIRSPACE = 5. Cleaning House 10 litres FROM AN EXISTING WATER SUPPLY WELL AS PER 1000, PVC PIPES SERIES 1000 II, 1500
AND ABOVE PVC PIPES
0.30

SIZE OF DIGESTIVE CHAMBER: Total: 135 liters PROVISIONS OF RA1378.

LENGTH = a. ASSUME 12 PERSONS: 135L X 12 = 1620L CLASS 35 WITH SOLVENT JOINT FCO FLOOR CLEAN OUT
TO FIXTURE FITTINGS, "ORANGEBERG/ ATLANTA /
WIDTH = b. ADD 20% FOR FIRE RESERVE: 1620L + 324 = 1944L 8. OUTFLOW FROM THE SEPTIC VAULT SHALL BE
20mm Ø CWL DEPTH = c. USE 2000L CAPACITY OVERHEAD WATER TANK EMERALD" BRAND OR EQUAL. CCO
DISCHARGED DIRECTLY TO THE STREET DRAINAGE, CEILING CLEAN OUT
TO WATER AIRSPACE =
FROM WATER DRAIN PIPES & CATCH BASIN DISCHARGING OUTFLOW
DISTRIBUTION SIZE OF LEACHING CHAMBER: `VENT LINES - PVC PIPES
MAIN LINE FROM SUPPLY MIN.DIAMETER HORIZONTAL (WASTE/SOIL)= FROM THE SEPTIC VAULT SHALL ALSO BE WC WATER CLOSET
SYSTEM LENGTH = SERIES 1000, WITH SOLVENT JOINT
100MMØ CONSTRUCTED WATERTIGHT/WATERPROOFED TO
WIDTH = MIN. SIZE OF BUILDING SEWER FITTINGS, “ORANGEBERG/ ATLANTA / LAV LAVATORY
PREVENT LEAKAGE TO PERCOLATE TO THE GROUND
DEPTH = EMERALD" BRAND OR
4 WATER METER & AIR CHAMBER DETAIL
= 100MMØ .
AIRSPACE = MIN. SIZE OF DOWNSPOUT (6 PCS) 9. WHENEVER, POTABLE WATER REQUIREMENT FAU FAUCET
OVERALL DIMENSION OF SEPTIC VAULT: = 75MMØ FOR A BUILDING USED FOR HUMAN HABITATION
P-2 SCALE: NTS LENGTH = = 50MMØ SHALL BE SUPPLIED FROM EXISTING MUNICIPAL OR
`WATER FD FLOOR DRAIN
WIDTH = MIN.DIAMETER MAIN VENT
METER - “ARAD, EVER, ASAHI" MWSS
CITY WATERWORKS SYSTEM (SECTION 902, APPROVED.
TOTAL DEPTH+ AIRSPACE = MIN.DIAMETER HORIZON (BRANCHVENT) = 50MMØ CHAPTER 9, NATIONAL BUILDING CODE OF THE SHO SHOWER

MIN. DIA WATERLINE SUPPLY = 25MMØ PHILIPPINES PD1096).

???? `DRAIN AND CLEAN-OUTS - BRONZE, HB HOSE BIBB
MIN. DIA WATERLINE WC/LAV = 10MMØ
150 ??? 150 ??? 150
10mm Ø RSB @ 600 MM O.C.B.W. CONFORMING ASTM B62, 1O34 KPA
MIN. DIA WATERLINE KSK/SHO = 12MMØ 10. ALL PLUMBING WORKS SHALL BE DONE BY
M.H. CLASS THREADED GT GREASE TRAP
EXPERIENCED PLUMBERS & JOURNEYMEN UNDER THE CONNECTION.
300 100

DIRECT SUPERVISION OF A DULY REGISTERED

150

MASTER PLUMBER. ST SEPTIC TANK

WATERLINE
ALL MOUNTING HEIGHTS SHALL BE
input OUTPUT
SUBJECT TO THE ARCHITECT'S GD GUTTER DRAIN
OUTPUT

APPROVAL
MH MAN HOLE
????

M.H. M.H. UNDERTAKINGS:

????

????

I,____________________________________
???

DIGESTIVE CHAMBER LEACHING CHAMBER SP SOIL PIPE

DO HEREBY AGREE THAT THE TOP SLAB
input OF THE SEPTIC VAULT SHALL NOT BE PUT IN PLACE OR CONSTRUCTED NOT UNTIL AFTER WP WASTE PIPE
INSPECTION BY THE DESIGNER MASTER PLUMBER AND REPRESENTATIVE FROM THE OFFICE OF THE
BUILDING OFFICIAL AND AFTER APPROPRIATE REPORT FORM HAD BEEN SIGNED BY BOTH VSTR VENT STACK THRU ROOF
THATINDEED THE SEPTIC VAULT IS WATERTIGHT/WATERPROOFED. THE SIGNED REPORT FORM SHALL
400

GV
150

THEN ATTACHED BY ME WHEN APPLYING FOR THE FOR THE CERTIFICATE OF OCCUPANCY. GATE VALVE

P L A N 150 MM THK. CHB THE UNDERSIGNED ALSO ACKNOWLEGDE TO ABIDE WITH THE PROVISION STATED IN TABLE B-1 OF
S E C T I O N THE NATIONAL PLUMBING CODE OF THE PHILIPPINES. CV CHECK VALVE
10 mm Ø RSB @ 300 MM O.C B.W.

5 SEPTIC TANK DETAIL __________________________

M WATER METER

OWNER
P-2 SCALE: 1:20 MTS
DONE BY: DESIGN BY: PROJECT TITLE: OWNER: REVISIONS: SHEET NO.:
ALL DESIGNS, DRAWINGS, SPECIFICATIONS &
COPIES PREPARED AND FURNISHED BY THE
PROPOSED 2-STOREY RESIDENTIAL BUILDING
MASTER PLUMBER
ARCHITECT IN CONNECTION WITH THE PROJECT
ARE INSTRUMENTS OF PROFESSIONAL SERVICE,
MARIA KURDAPYA
2
PRC REG. NO: PTR NO:
THEY ARE THE PROPERTY OF THE ARCHITECT,
WHETHER THEY ARE EXECUTED OR NOT, THEY ARE LOCATION: SHEET CONTENTS: P
VALIDITY: DATE ISSUED:
NOT TO BE REPRODUCED OR USE ON OTHER WORK
EXCEPT IF WRITTEN AGREEMENT WITH THE
ARCHITECT. ILOILO CITY
WATER CLOSET MOUNTING DETAIL, NOTES: FOR SOIL, VENT & WASTE SYSTEM, NOTES: FOR COLD
WATERLINE SYSTEM, PLUMBING ANALYSIS, UNDERTAKING, SEPTIC TANK DETAIL, SPECIFICATIONS,
GENERAL NOTES & PLUMBING SYMBOLS, AIR CHAMBER DTL., WATER METER DTL., CATCH BASIN
DRAWN BY: RONOROA ZORO 2
TIN: PLACE: , ILOILO CITY AND CLEAN OUT DETAIL.
RA 9266, ART 4, SEC 33