Scribd
Upload
10 views

Must_Battery_APP

The BMS APP user manual provides instructions for downloading, installing, and using the app for local and remote control of devices. Users must grant permissions for features like camera and location to function properly, and account registration is required for remote control. The manual also covers device management, sharing, control functions, firmware upgrades, and account management procedures.

Uploaded by

sunlightsolarfs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
10 views

Must_Battery_APP

The BMS APP user manual provides instructions for downloading, installing, and using the app for local and remote control of devices. Users must grant permissions for features like camera and location to function properly, and account registration is required for remote control. The manual also covers device management, sharing, control functions, firmware upgrades, and account management procedures.

Uploaded by

sunlightsolarfs
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

BMS APP user manual

1、Download and install


According to the mobile phone system, select the download link:
Android entrance：Mobile phones that support GMS can download App through Google
Play Store, and Android phones please obtain the installation apk from dealer.

2、APP dynamic permission


Install the APP, click the start button and start smoothly. For the first
start, you will request the user to confirm and authorize the following
authority: Camera permission: Add wifi devices in remote control Location
permission: search for nearby Bluetooth devices in local control and
identify current network information in remote control Equipment status
information: to detect the operation status of the equipment Photos and
audio: The code scanning interface in the remote control system can
directly identify the local photo album

1
3、Control method
Local control: BLE Bluetooth communication, directly search for the
nearby Bluetooth signal, a pair of continuous connection, control devices,
no account login, do not do binding records, that is, ready to use Remote
control: WiFi communication, which realizes the purpose of controlling
the device rather than in the same geographical location. It requires
account registration and login, records the binding between the account
and the device, and requires distribution network operation.

2
4、Local Control (BLE)
When the device is in the distribution network state, click the local
control button to search the device on the local control page, and click
the device to enter the device control page (Need Bluetooth function)

3
5、 telecontrol
5.1，Account registration and login
Registration: Create the new account by means of email account, password
and verification code. Note: Please select the real country and region
according to the actual situation. This is very important. Once selected
and created successfully, the devices added through the account
distribution network will automatically connect to the server node with
the same account Login: Log in with the registered account number and
password Forget your password: You can reset your password through your
email number

4
5.2，List of equipment

5.3，Equipment added
5.3.1：The wifi module is put back in the factory
The wifi module restores the factory so that the device is in a
discoverable state :
Long press the reset button 10-13 s, the specific operation of the LED
lamp is shown as : long press the button to make the water lamp run one.

5
5.3.2：Click "Add" and "+" to enter the search page and search

for the device


Note: This step requires the phone to open the "Bluetooth", "Positioning"
and "WiFi" functions, otherwise the search and subsequent distribution
network operation cannot be completed

6
5.3.3：Fill in the distribution network information
Click the device found in 5.3.2, jump to the distribution network
information page, fill in the WiFi account and password of the device to
be connected, or change the WiFi. After confirming that the password is
correct, click "Next" to enter the distribution network waiting page
Note: The mobile phone should be connected to the WiFi first, and the
module only supports 2.4G WiFi, please identify it by yourself

7
5.3.4：Execute distribution network operation
APP and device will automatically perform "Connect device", "Configure
network", "device cloud" and "bind device" operations. Please wait
patiently

8
5.3.5：Distribution network results
When the distribution network is over, it will jump to the page, click
Save to successfully add and automatically jump back to the device list
page; If the network fails, please follow the prompts of the APP, and start
from step 5.3.1 after inspection. If the network still fails for many times,
please save the error page and contact the after-sales personnel!

9
5.4，Device editor
Long press the device item, and the edit menu will pop up at the bottom
Rename: Modify device nickname to use Delete: unbinding with the device,
the next use need to scan the code or add the network

10
5.5，Device sharing
Long press the device item, when you are the device administrator (the
first account bound to the first distribution network), the device can
generate a QR code for other users to scan the code to add.
Note: Non-administrators cannot share twice. The QR code generated each
time can only be scanned once, and the time of scanning the code is limited
(30 minutes).

11
5.6，Device control
According to the functions supported by serial port protocol 0.0.9, except
for the protocol itself, the summary interface, basic data, voltage and
temperature, state data, historical data, parameter setting, equipment
information, general setting, etc

12
5.7，OTA upgrade
When there is an updated version of firmware in the background, the APP
clicks on a device to pop up the upgrade popup, click upgrade immediately,
and the firmware will be upgraded. Click the next time to enter the device
parameters display, Settings and other pages.

13
14
5.8，Account exit and logout
Account exit: after exit, you can switch to other accounts for login
Account cancellation: Once cancelled, all the information and binding
relationship of the account will be cleared, and you need to be
re-registered next time

15

You might also like